Long wavelength single photon like driven photolysis via triplet triplet annihilation

Dual Pathways of Photorelease Carbon Monoxide via Photosensitization for Tumor Treatment

Carbon monoxide (CO) gas therapy, as an emerging therapeutic strategy, is promising in tumor treatment. However, the development of a red or near-infrared light-driven efficient CO release strategy is still challenging due to the limited physicochemical characteristics of the photoactivated carbon monoxide-releasing molecules (photoCORMs). Here, we discovered a novel photorelease CO mechanism that involved dual pathways of CO release via photosensitization. Specifically, the photosensitizer Chlorin e6 (Ce6) sensitized oxygen to produce singlet oxygen (1O2) and oxidized photoCORM Mn2(CO)10 to release CO in an air-saturated solvent under red light (655 nm, 50 mW/cm2) irradiation. Furthermore, Ce6 and Mn2(CO)10 could undergo multistep photochemical reactions to release CO, as well as the degradation of the photosensitizer Ce6 in an oxygen-depleted solution. As a proof of concept, we demonstrated the feasibility and tumor inhibition of this CO release strategy both in vitro and in vivo. These results provide a robust platform for the development of new approaches to CO-mediated modulation of signaling pathways and further facilitate the practical use of gas therapeutic methods in tumor therapy in vivo.

Compact Molecular Conformation of Prodrugs Enhances Photocleaving Performance for Tumor Vascular Growth Inhibition

Highly spatiotemporal-resolved photomodulation demonstrates promise for investigating key biological events in vivo and in vitro, such as cell signaling pathways, neuromodulation, and tumor treatment without side effects. However, enhancing the performance of photomodulation tools remains challenging due to the limitations of the physicochemical properties of the photoactive molecules. Here, a compact, stable intramolecular π-π stacking conformation forming between the target molecule (naproxen) and the perylene-based photoremovable protecting group is discovered to confine the motion of the photolabile bond and then enhance the photocleavage quantum yield. In conjunction with a red-absorbing photosensitizer, the photocleavage wavelength is extended to the red region via triplet-triplet annihilation. In particular, the triplet lifetime of the prodrug can be extended via the linked steric hindrance to improve the conversion yield via TTA. Using the new photomodulation tool, it is precisely photoreleased cyclooxygenase-2 inhibitors for tumor vascular growth suppression in vivo. In combination with cisplatin, over 90% efficient inhibition of malignant breast tumors is observed via the synergistic tumor treatment strategy. These findings provide a new concept for the rational design of efficient photocleavage and have implications for photomodulating cell signaling pathways in tumor therapy, as well as laying a solid foundation for the development of phototherapeutic approaches.

Luminescent Fe(III) Complex Sensitizes Aerobic Photon Upconversion and Initiates Photocatalytic Radical Polymerization

Light energy conversion often relies on photosensitizers with long-lived excited states, which are mostly made of precious metals such as ruthenium or iridium. Photoactive complexes based on highly abundant iron seem attractive for sustainable energy conversion, but this remains very challenging due to the short excited state lifetimes of the current iron complexes. This study shows that a luminescent Fe(III) complex sensitizes triplet-triplet annihilation upconversion with anthracene derivatives via underexplored doublet-triplet energy transfer, which is assisted by preassociation between the photosensitizer and the annihilator. In the presence of an organic mediator, the green-to-blue upconversion efficiency ΦUC with 9,10-diphenylanthracene (DPA) as the annihilator achieves a 6-fold enhancement to ∼0.2% in aerated solution at room temperature. The singlet excited state of DPA, accessed via photon upconversion in the Fe(III)/DPA pair, allows efficient photoredox catalytic radical polymerization of acrylate monomers in a spatially controlled manner, whereas this process is kinetically hindered with the prompt DPA. Our study provides a new strategy of using low-cost iron and low-energy visible light for efficient polymer synthesis, which is a significant step for both fundamental research and future applications.

Biomimetic Activation of N-Nitrosamides with Red Light-Triggered Nitric Oxide Release via Mediated Electron Transfer

Mediated electron transfer (MET) is fundamental to many biological functions, including cellular respiration, photosynthesis, and enzymatic catalysis. However, leveraging the MET process to enable the release of therapeutic gases has been largely unexplored. Herein, we report the bio-inspired activation of a series of UV-absorbing N-nitrosamide derivatives (NOA) under red light exposure, enabling the quantitative release of nitric oxide (NO) gasotransmitter via an MET process. The cornerstone of our design is the covalent linkage of a 2,4-dinitroaniline moiety, which acts as an electron mediator to the N-nitrosamide groups. This facilitates efficient electron transfer from the excited palladium(II) meso-tetraphenyltetrabenzoporphyrin (PdTPTBP) photocatalyst and the selective activation of NOA. Our approach has been validated with distinct photocatalysts and various N-nitrosamides, including those derived from carbamates, amides, and ureas. Notably, the modulation of the linker length between the electron mediator and N-nitrosamide groups serves as a regulatory mechanism for controlling NO release kinetics. Moreover, this biomimetic NO release platform demonstrates effective operation under both normoxic and hypoxic conditions, and it enables localized delivery of NO under physiological conditions, exhibiting significant anticancer efficacy within the phototherapeutic window and enhanced selectivity towards tumor cells.

Homomolecular Triplet-Triplet Annihilation in Metalloporphyrin Photosensitizers

Metalloporphyrins are ubiquitous in their applications as triplet photosensitizers, particularly for promoting sensitized photochemical upconversion processes. In this study, bimolecular excited state triplet-triplet quenching kinetics, termed homomolecular triplet-triplet annihilation (HTTA), exhibited by the traditional triplet photosensitizers-zinc(II) tetraphenylporphyrin (ZnTPP), palladium(II) octaethylporphyrin (PdOEP), platinum(II) octaethylporphyrin (PtOEP), and platinum(II) tetraphenyltetrabenzoporphyrin (PtTPBP)─were revealed using conventional transient absorption spectroscopy. Nickel(II) tetraphenylporphyrin was used as a control sample as it is known to be rapidly quenched intramolecularly through ligand-field state deactivation and, therefore, cannot result in triplet-triplet annihilation (TTA). The single wavelength transients associated with the metalloporphyrin triplet excited state decay─measured as a function of incident laser pulse energy in toluene─were well modeled using parallel first- and second-order kinetics, consistent with HTTA being operable. The combined transient kinetic data enabled the determination of the first-order rate constants (kT) for excited triplet decay in ZnTPP (4.0 × 103 s-1), PdOEP (3.6 × 103 s-1), PtOEP (1.2 × 104 s-1), and PtTPBP (2.1 × 104 s-1) as well as the second-order rate constant (kTT) for HTTA in ZnTPP (5.5 × 109 M-1 s-1), PdOEP (1.1 × 1010 M-1 s-1), PtOEP (7.1 × 109 M-1 s-1), and PtTPBP (1.6 × 1010 M-1 s-1). In most instances, triplet excited state extinction coefficients are either reported for the first time or have been revised using ultrafast transient absorption spectroscopy and singlet depletion: ZnTPP (78,000 M-1 cm-1) at 470 nm, PdOEP (67,000 M-1 cm-1) at 430 nm, PtOEP (51,000 M-1 cm-1) at 418 nm, and PtTPBP (100,000 M-1 cm-1) at 460 nm. The combined experimental results establish competitive time scales for homo- and heteromolecular TTA rate constants, implying the significance of considering HTTA processes in future research endeavors harnessing TTA photochemistry using common metalloporphyrin photosensitizers.

Synthetic Chemistry in Flow: From Photolysis & Homogeneous Photocatalysis to Heterogeneous Photocatalysis

Photocatalytic synthesis of value-added chemicals has gained increasing attention in recent years owing to its versatility in driving many important reactions under ambient conditions. Selective hydrogenation, oxidation, coupling, and halogenation with a high conversion of the reactants have been realized using designed photocatalysts in batch reactors with small volumes at a laboratory scale; however, scaling-up remains a critical challenge due to inefficient utilization of incident light and active sites of the photocatalysts, resulting in poor catalytic performance that hinders its practical applications. Flow systems are considered one of the solutions for practical applications of light-driven reactions and have experienced great success in photolytic and homogeneous photocatalysis, yet their applications in heterogeneous photocatalysis are still under development. In this perspective, we have summarized recent progress in photolytic and photocatalytic synthetic chemistry performed in flow systems from the view of reactor design with a special focus on heterogeneous photocatalysis. The advantages and limitations of different flow systems, as well as some practical considerations of design strategies are discussed.

Long wavelength near-infrared and red light-driven consecutive photo-induced electron transfer for highly effective photoredox catalysis

Consecutive photoinduced electron transfer (conPET) processes accumulate the energies of two photons to overcome the thermodynamic limit of traditional photoredox catalysis. However, the excitation wavelength of conPET systems mainly focused on short wavelength visible light, leading to photodamage and incompatibility with large-scale reactions. Herein, we report on conPET systems triggered by near-infrared (NIR) and red light. Specifically, a blue-absorbing conPET photocatalyst, perylene diimide (PDI) is sensitized by a palladium-based photosensitizer to triplet excited state (3PDI*), which generates PDI radical anion (PDI•-) over 100-fold faster than that in the conventional conPET. Accordingly, photoreduction with superior reaction rate and penetration depth, as well as reduced photodamage is detected. More importantly, our work offers comprehensive design rules for the triplet-mediated conPET strategy, whose versatility is confirmed by metal-free dye pairs and NIR-active PtTNP/PDI. Notably, our work achieves NIR-driven atom transfer radical polymerization using an inert aromatic halide as the initiator.

Triplet-Triplet Annihilation Upconversion-Based Photolysis: Applications in Photopharmacology

The emerging field of photopharmacology is a promising chemobiological methodology for optical control of drug activities that could ultimately solve the off-target toxicity outside the disease location of many drugs for the treatment of a given pathology. The use of photolytic reactions looks very attractive for a light-activated drug release but requires to develop photolytic reactions sensitive to red or near-infrared light excitation for better tissue penetration. This review will present the concepts of triplet-triplet annihilation upconversion-based photolysis and their recent in vivo applications for light-induced drug delivery using photoactivatable nanoparticles.

BODIPY-based photocages: rational design and their biomedical application

Photocages, also known as photoactivated protective groups (PPGs), have been utilized to achieve controlled release of target molecules in a non-invasive and spatiotemporal manner. In the past decade, BODIPY fluorophores, a well-established class of fluorescent dyes, have emerged as a novel type of photoactivated protective group capable of efficiently releasing cargo species upon irradiation. This is due to their exceptional properties, including high molar absorption coefficients, resistance to photochemical and thermal degradation, multiple modification sites, favorable uncaging quantum yields, and highly adjustable spectral properties. Compared to traditional photocages that mainly absorb UV light, BODIPY-based photocages that absorb visible/near-infrared (Vis/NIR) light offer advantages such as deeper tissue penetration and reduced bio-autofluorescence, making them highly suitable for various biomedical applications. Consequently, different types of photoactivated protective groups based on the BODIPY skeleton have been established. This highlight provides a comprehensive overview of the strategies employed to construct BODIPY photocages by substituting leaving groups at different positions within the BODIPY fluorophore, including the meso-methyl position, boron position, 2,6-position, and 3,5-position. Furthermore, the application of these BODIPY photocages in biomedical fields, such as fluorescence imaging and controlled release of active species, is discussed.

O-nitrobenzyl Caged Molecule Enables Photo-controlled Release of Thiabendazole

Pesticides are essential in agricultural development. Controlled-release pesticides have attracted great attentions. Base on a principle of spatiotemporal selectivity, we extended the photoremovable protective group (PRPG) into agrochemical agents to achieve controllable release of active ingredients. Herein, we obtained NP-TBZ by covalently linking o-nitrobenzyl (NP) with thiabendazole (TBZ). Compound NP-TBZ can be controlled to release TBZ in dependent to light. The irradiated and unirradiated NP-TBZ showed significant differences on fungicidal activities both in vitro and in vivo. In addition, the irradiated NP-TBZ displayed similar antifungal activities to the directly-used TBZ, indicating a factual applicability in controllable release of TBZ. Furthermore, we explored the action mode and microcosmic variations by SEM analysis, and demonstrated that the irradiated NP-TBZ retained a same action mode with TBZ against mycelia growth.

Triplet-triplet annihilation photon upconversion-mediated photochemical reactions

Photon upconversion is a method for harnessing high-energy excited states from low-energy photons. Such photons, particularly in the red and near-infrared wavelength ranges, can penetrate tissue deeply and undergo less competitive absorption in coloured reaction media, enhancing the efficiency of large-scale reactions and in vivo phototherapy. Among various upconversion methodologies, the organic-based triplet-triplet annihilation upconversion (TTA-UC) stands out - demonstrating high upconversion efficiencies, requiring low excitation power densities and featuring tunable absorption and emission wavelengths. These factors contribute to improved photochemical reactions for fields such as photoredox catalysis, photoactivation, 3D printing and immunotherapy. In this Review, we explore concepts and design principles of organic TTA-UC-mediated photochemical reactions, highlighting notable advancements in the field, as well as identify challenges and propose potential solutions. This Review sheds light on the potential of organic TTA-UC to advance beyond the traditional photochemical reactions and paves the way for research in various fields and clinical applications.

Research progress, trends, and updates on pollutants removal by Bi2WO6-based photocatalysts under visible light irradiation

In recent years, extensive research has been conducted on bismuth tungstate (Bi2WO6) in the field of photocatalysis owing to its unique crystal structure and favorable bandgap. This study offers a comprehensive review of the research on Bi2WO6-based photocatalysts from 2007 to 2022 using bibliometric analysis. The analysis utilized the Web of Science Core Collection Database and encompassed a dataset of 2064 publications. The bibliometric analysis and science mapping were carried out using the bibliometix R-package and CiteSpace software. This analysis examined and discussed the network of relationships among countries, journals, organizations, authors, and keywords pertaining to the topic and subtopics under investigation. The findings demonstrate that China has played a significant role in this research area and has formed close collaborations with other countries. The identification of highly-cited emerging terms suggests that enhancing the photocatalytic performance of Bi2WO6-based nanomaterials is a primary research focus. Moreover, there has been increasing interest in exploring the synergistic effects of photocatalysis and adsorption as a means to improve catalytic efficiency. This study provides valuable insights for researchers seeking a deeper understanding of Bi2WO6-based photocatalysts.

Expanding the Anti-Stokes Shift of TTA-UC to 1.04 eV by Chemical Tuning of BODIPY-Based Organic Photosensitizers

A series of BODIPY-derivatives B-1 ∼ B-5 were synthesized as metal-free photosensitizers in triplet-triplet annihilation (TTA) upconversion (UC) with the purpose of finely tuning the excited state properties to reduce the energy loss during intersystem crossing (ISC), and hence to expand the anti-Stokes shift of TTA-UC. It was revealed that B-5 showed a ΔEST of as small as 0.28 eV, thus, providing a large anti-Stokes shift of 1.04 eV in TTA-UC with organic sensitizers. A deep red-blue upconversion emission with UC quantum yields of up to 10.7% (out of a 50% maximum) was observed.

Coulomb interactions for mediator-enhanced sensitized triplet-triplet annihilation upconversion in solution

Sensitized triplet-triplet annihilation upconversion offers an attractive possibility to replace a high-energy photon by two photons with lower energy through the combination of a light-harvesting triplet sensitizer and an annihilator for the formation of a fluorescent singlet state. Typically, high annihilator concentrations are required to achieve an efficient initial energy transfer and as a direct consequence the most highly energetic emission is often not detectable due to intrinsic reabsorption by the annihilator itself. Herein, we demonstrate that the addition of a charge-adapted mediator drastically improves the energy transfer efficiency at low annihilator concentrations via an energy transfer cascade. Inspired by molecular dyads and recent developments in nanocrystal-sensitized upconversion, our system exploits a concept to minimize intrinsic filter effects, while boosting the upconversion quantum yield in solution. A sensitizer-annihilator combination consisting of a ruthenium-based complex and 9,10-diphenylanthracene (DPA) is explored as model system and a sulfonated pyrene serves as mediator. The impact of opposite charges between sensitizer and mediator - to induce coulombic attraction and subsequently result in accelerated energy transfer rate constants - is analyzed in detail by different spectroscopic methods. Ion pairing and the resulting static energy transfer in both directions is a minor process, resulting in an improved overall performance. Finally, the more intense upconverted emission in the presence of the mediator is used to drive two catalytic photoreactions in a two-chamber setup, illustrating the advantages of our approach, in particular for photoreactions requiring oxygen that would interfere with the upconversion system.

First-Row d6 Metal Complex Enables Photon Upconversion and Initiates Blue Light-Dependent Polymerization with Red Light

Photosensitizers for sensitized triplet-triplet annihilation upconversion (sTTA-UC) often rely on precious heavy metals, whereas coordination complexes based on abundant first-row transition metals are less common. This is mainly because long-lived triplet excited states are more difficult to obtain for 3d metals, particularly when the d-subshell is only partially filled. Here, we report the first example of sTTA-UC based on a 3d6 metal photosensitizer yielding an upconversion performance competitive with precious metal-based analogues. Using a newly developed Cr0 photosensitizer featuring equally good photophysical properties as an OsII benchmark complex in combination with an acetylene-decorated anthracene annihilator, red-to-blue upconversion is achievable. The upconversion efficiency under optimized conditions is 1.8 %, and the excitation power density threshold to reach the strong annihilation limit is 5.9 W/cm2 . These performance factors, along with high photostability, permit the initiation of acrylamide polymerization by red light, based on radiative energy transfer between delayed annihilator fluorescence and a blue light absorbing photo-initiator. Our study provides the proof-of-concept for photon upconversion with elusive first-row analogues of widely employed precious d6 metal photosensitizers, and for their application in photochemical reactions triggered by excitation wavelengths close to near-infrared.

Bulky Substituents Promote Triplet-Triplet Annihilation Over Triplet Excimer Formation in Naphthalene Derivatives

Visible-to-ultraviolet (UV) triplet-triplet annihilation photochemical upconversion (TTA-UC) has gained a lot of attention recently due to its potential for driving demanding high-energy photoreactions using low-intensity visible light. The efficiency of this process has rapidly improved in the past few years, in part thanks to the recently discovered annihilator compound 1,4-bis((triisopropylsilyl)ethynyl)naphthalene (N-2TIPS). Despite its beneficial TTA-UC characteristics, the success of N-2TIPS in this context is not yet fully understood. In this work, we seek to elucidate what role the specific type and number of substituents in naphthalene annihilator compounds play to achieve the characteristics sought after for TTA-UC. We show that the type of substituent attached to the naphthalene core is crucial for its performance as an annihilator. More specifically, we argue that the choice of substituent dictates to what degree the sensitized triplets form excimer complexes with ground state annihilators of the same type, which is a process competing with that of TTA. The addition of more bulky substituents positively impacts the upconverting ability by impeding excimer formation on the triplet surface, an effect that is enhanced with the number of substituents. The presence of triplet excimers is confirmed from transient absorption measurements, and the excimer formation rate is quantified, showing several orders of magnitude differences between different derivatives. These insights will aid in the further development of annihilator compounds for solar energy applications for which the behavior at low incident powers is of particular significance.

Photoactivatable Liposomes for Blue to Deep Red Light-Activated Surface Drug Release: Application to Controlled Delivery of the Antitumoral Drug Melphalan

Liposome-based nanoparticles able to release, via a photolytic reaction, a payload anchored at the surface of the phospholipid bilayer were prepared. The liposome formulation strategy uses an original drug-conjugated blue light-sensitive photoactivatable coumarinyl linker. This is based on an efficient blue light-sensitive photolabile protecting group modified by a lipid anchor, which enables its incorporation into liposomes, leading to blue to green light-sensitive nanoparticles. In addition, the formulated liposomes were doped with triplet-triplet annihilation upconverting organic chromophores (red to blue light) in order to prepare red light sensitive liposomes able to release a payload, by upconversion-assisted photolysis. Those light-activatable liposomes were used to demonstrate that direct blue or green light photolysis or red light TTA-UC-assisted drug photolysis can effectively photorelease a drug payload (Melphalan) and kill tumor cells in vitro after photoactivation.

Applications of red light photoredox catalysis in organic synthesis

Photoredox catalysis has emerged as an efficient and versatile approach for developing novel synthetic methodologies. Particularly, red light photocatalysis has attracted more attention due to its intrinsic advantages of low energy, few health risks, few side reactions, and high penetration depth through various media. Impressive progress has been made in this field. In this review, we outline the applications of different photoredox catalysts in a wide range of red light-mediated reactions including direct red light photoredox catalysis, red light photoredox catalysis through upconversion, and dual red light photoredox catalysis. Due to the similarities between near-infrared (NIR) and red light, an overview of NIR-induced reactions is also presented. Lastly, current evidence showing the advantages of red light and NIR photoredox catalysis is also described.

Metal-Free Far-Red Light-Driven Photolysis via Triplet Fusion to Enhance Checkpoint Blockade Immunotherapy

Metal-free long-wavelength light-driven prodrug photoactivation is highly desirable for applications such as neuromodulation, drug delivery, and cancer therapy. Herein, via triplet fusion, we report on the far-red light-driven photo-release of an anti-cancer drug by coupling the boron-dipyrromethene (BODIPY)-based photosensitizer with a photocleavable perylene-based anti-cancer drug. Notably, this metal-free triplet fusion photolysis (TFP) strategy can be further advanced by incorporating an additional functional dopant, i.e. an immunotherapy medicine inhibiting the indoleamine 2,3-dioxygenase (IDO), with the far-red responsive triplet fusion pair in an air-stable nanoparticle. With this IDO inhibitor-assisted TFP system we observed efficient inhibition of primary and distant tumors in a mouse model at record-low excitation power, compared to other photo-assisted immunotherapy approaches. This metal-free TFP strategy will spur advancement in photonics and biophotonics fields.

Nanoengineering Triplet-Triplet Annihilation Upconversion: From Materials to Real-World Applications

Using light to control matter has captured the imagination of scientists for generations, as there is an abundance of photons at our disposal. Yet delivering photons beyond the surface to many photoresponsive systems has proven challenging, particularly at scale, due to light attenuation via absorption and scattering losses. Triplet-triplet annihilation upconversion (TTA-UC), a process which allows for low energy photons to be converted to high energy photons, is poised to overcome these challenges by allowing for precise spatial generation of high energy photons due to its nonlinear nature. With a wide range of sensitizer and annihilator motifs available for TTA-UC, many researchers seek to integrate these materials in solution or solid-state applications. In this Review, we discuss nanoengineering deployment strategies and highlight their uses in recent state-of-the-art examples of TTA-UC integrated in both solution and solid-state applications. Considering both implementation tactics and application-specific requirements, we identify critical needs to push TTA-UC-based applications from an academic curiosity to a scalable technology.

Derivatized Benzothiazoles as Two-Photon-Absorbing Organic Photosensitizers Active under Near Infrared Light Irradiation

Homogeneous organic photocatalysis typically requires molecular photosensitizers absorbing in the ultraviolet-visible (UV/vis) region, because UV/vis photons possess the sufficient energy to excite those one-photon-absorbing photosensitizers to the desired excited states. However, UV/vis light irradiation has many potential limitations, especially for large-scale applications, such as low penetration through reaction media, competing absorption by substrates and co-catalysts, and incompatibility with substrates bearing light-sensitive functionalities. In fact, these drawbacks can be effectively avoided if near infrared (NIR) photons can be utilized to drive the target reactions. Herein, we report two benzothiazole-derived compounds as novel two-photon-absorbing (TPA) organic photosensitizers, which can function under NIR light irradiation using inexpensive LED as the light source. We demonstrate that by judicially modulating the donor-π-acceptor-π-donor-conjugated structure containing a bibenzothiazole core and imine bridges, excellent two-photon absorption capability in the NIR region can be achieved, approaching 2000 GM at 850 nm. Together with large quantum yields (∼0.5), these benzothiazole-derived TPA organic photosensitizers exhibit excellent performance in driving various O₂-involved organic reactions upon irradiation at 850 nm, showing great penetration depth, superior to that upon blue light irradiation. A suite of photophysical and computational studies were performed to shed light on the underlying electronic states responsible for the observed TPA capability. Overall, this work highlights the promise of developing Ru/Ir-free organic photosensitizers operative in the NIR region by taking advantage of the two-photon absorption mechanism.

Red Light-Responsive Upconverting Nanoparticles for Quantitative and Controlled Release of a Coumarin-Based Prodrug

Photolytic reactions allow the optical control of the liberation of biological effectors by photolabile protecting groups. The development of versatile technologies enabling the use of deep-red or NIR light excitation still represents a challenging issue, in particular for light-induced drug release (e.g., light-induced prodrug activation). Here, light-sensitive biocompatible lipid nanocapsules able to liberate an antitumoral drug through photolysis are presented. It is demonstrated that original photon upconverting nanoparticles (LNC-UCs) chemically conjugated to a coumarin-based photocleavable linker can quantitatively and efficiently release a drug by upconversion luminescence-assisted photolysis using a deep-red excitation wavelength. In addition, it is also able to demonstrate that such nanoparticles are stable in the dark, without any drug leakage in the absence of light. These findings open new avenues to specifically liberate diverse drugs using deep-red or NIR excitations for future therapeutic applications in nanomedicine.

Sensitizer-controlled photochemical reactivity via upconversion of red light

By combining the energy input from two red photons, chemical reactions that would normally require blue or ultraviolet irradiation become accessible. Key advantages of this biphotonic excitation strategy are that red light usually penetrates deeper into complex reaction mixtures and causes less photo-damage than direct illumination in the blue or ultraviolet. Here, we demonstrate that the primary light-absorber of a dual photocatalytic system comprised of a transition metal-based photosensitizer and an organic co-catalyst can completely alter the reaction outcome. Photochemical reductions are achieved with a copper(i) complex in the presence of a sacrificial electron donor, whereas oxidative substrate activation occurs with an osmium(ii) photosensitizer. Based on time-resolved laser spectroscopy, this changeover in photochemical reactivity is due to different underlying biphotonic mechanisms. Following triplet energy transfer from the osmium(ii) photosensitizer to 9,10-dicyanoanthracene (DCA) and subsequent triplet-triplet annihilation upconversion, the fluorescent singlet excited state of DCA triggers oxidative substrate activation, which initiates the cis to trans isomerization of an olefin, a [2 + 2] cycloaddition, an aryl ether to ester rearrangement, and a Newman-Kwart rearrangement. This oxidative substrate activation stands in contrast to the reactivity with a copper(i) photosensitizer, where photoinduced electron transfer generates the DCA radical anion, which upon further excitation triggers reductive dehalogenations and detosylations. Our study provides the proof-of-concept for controlling the outcome of a red-light driven biphotonic reaction by altering the photosensitizer, and this seems relevant in the greater context of tailoring photochemical reactivities.

Dye Doped Metal-Organic Frameworks for Enhanced Phototherapy

Phototherapy is a noninvasive cancer treatment that relies on the interaction between light and photoactive agents. These photoactive agents are typically organic dyes, but their hydrophobic nature and self-aggregation tendency in biological media greatly restricts the development of highly effective phototherapeutic systems. In the past decade, functional dye-doped metal-organic framework (MOF)-based phototherapy has attracted enormous interest because organic dyes can be encapsulated and isolated within the MOF structure to show superior treatment efficacy. In addition to incorporating the reported phototherapeutic dyes into MOF as the ligand or the guest in the pores, the construction of an MOF-based phototherapy agent can also be extended to these dye units that are previously inactive for phototherapy. Thus, this review focuses on the emerging development of phototherapeutic MOFs that exhibited better performance than the involving dye units due to the controlled dye aggregation within the MOF. The related mechanisms and some emerging future directions of dye-doped MOF-based phototherapy are also discussed and summarized.

Enhancing Triplet-Triplet Annihilation Upconversion: From Molecular Design to Present Applications

Photon upconversion, the process of converting low-energy photons into high-energy ones, has been widely applied for solar energy conversion, photoredox catalysis, and various biological applications such as background-free bioimaging, cancer therapy, and optogenetics. Upconversion materials that are based on triplet-triplet annihilation (TTA) are of particular interest due to their low excitation power requirements (e.g., ambient sunlight) and easily tunable excitation and emission wavelengths. Despite advances that have been made with respect to TTA upconversion (TTA-UC) in the past decade, several challenges remain for near-infrared light-activatable triplet-triplet annihilation upconversion (NIR TTA-UC). These challenges include low upconversion quantum yield, small anti-Stokes shift, and incompatibility with oxygen, the latter of which seriously limits the practical applications of NIR TTA-UC.This Account will summarize the recent research endeavors to address the above-mentioned challenges and the recent new applications. The first part of this Account highlights recent strategies of molecular design to modulate the excited states of photosensitizers and annihilators, two key factors to determine TTA-UC performance. Novel molecular engineering strategies such as the resonance energy transfer method, dimerization of dye units, and the helix twist molecular structure have been proposed to tune the excited states of photosensitizers. The obtained photosensitizers exhibited enhanced absorption of deep tissue penetrable near-infrared (NIR) light, produced a triplet excited state with elevated energy level and prolonged lifetime, and promoted intersystem crossing, leading to an upgraded TTA-UC system with significantly expanded anti-Stokes shift. With respect to the annihilator, the perylene derivatives were systematically explored, and their attached aromatic groups were found to be the key to adjusting the energy levels of both the triplet and singlet excited states. The resultant optimal TTA-UC system exhibits the highest recorded efficiency among NIR TTA-UC systems.Moreover, to resolve the oxygen-induced TTA-UC quenching, enzymatic reactions were recently introduced. More specifically, the glucose oxidase-catalyzed glucose oxidation reaction showed the ability to rapidly consume oxygen to turn on the TTA-UC luminescence in an aqueous solution. The resultant TTA-UC nanoparticle was able to detect glucose and an enzyme related to glucose metabolism in a highly specific, sensitive, and background-free manner. Further, the upconverted singlet excited state of the annihilator was directly utilized as the catalyst or the excited substrate. For example, the modification of annihilators and drug molecules with photolabile linkages can realize the long wavelength light-induced photolysis. Compared to direct short-wavelength-driven photolysis, this sensitized TTA photolysis (TTAP) exhibits superior reaction yield and lower photodamage, which are important in the release of drugs for tumor treatment in vivo. Moreover, the improved upconversion efficiency can enable the successful coupling of NIR TTA-UC with a visible light absorbing photocatalyst for NIR-driven photoredox catalysis. Compared to direct visible-light photocatalysis, TTA-UC mediated NIR photoredox catalysis showed superior product yield especially in large scale reaction systems owing to the deep penetration power of NIR light. More interestingly, among a few promising technology applications, three-dimensional (3D) printing based on photopolymerization can operate with faster speed and energy-input several orders of magnitude lower when the two-photon polymerization is replaced with TTA-UC mediated polymerization. We believe this Account will spur interest in the further development and application of TTA-UC in the areas of energy, chemistry, material science, and biology.

Direct Utilization of Near-Infrared Light for Photooxidation with a Metal-Free Photocatalyst

Near-infrared (NIR) light-triggered photoredox catalysis is highly desirable because NIR light occupies almost 50% of solar energy and possesses excellent penetrating power in various media. Herein we utilize a metal-free boron dipyrromethene (BODIPY) derivative as the photocatalyst to achieve NIR light (720 nm LED)–driven oxidation of benzylamine derivatives, sulfides, and aryl boronic acids. Compared to blue light–driven photooxidation using Ru(bpy)₃Cl₂ as a photocatalyst, NIR light–driven photooxidation exhibited solvent independence and superior performance in large-volume (20 mL) reaction, presumably thanks to the neutral structure of a BODIPY photocatalyst and the deeper penetration depth of NIR light. We further demonstrate the application of this metal-free NIR photooxidation to prodrug activation and combination with Cu-catalysis for cross coupling reaction, exhibiting the potential of metal-free NIR photooxidation as a toolbox for organic synthesis and drug development.

Two-photon-absorbing ruthenium complexes enable near infrared light-driven photocatalysis

One-photon-absorbing photosensitizers are commonly used in homogeneous photocatalysis which require the absorption of ultraviolet (UV) /visible light to populate the desired excited states with adequate energy and lifetime. Nevertheless, the limited penetration depth and competing absorption by organic substrates of UV/visible light calls upon exploring the utilization of longer-wavelength irradiation, such as near-infrared light (λ_irr > 700 nm). Despite being found applications in photodynamic therapy and bioimaging, two-photon absorption (TPA), the simultaneous absorption of two photons by one molecule, has been rarely explored in homogeneous photocatalysis. Herein, we report a group of ruthenium polypyridyl complexes possessing TPA capability that can drive a variety of organic transformations upon irradiation with 740 nm light. We demonstrate that these TPA ruthenium complexes can operate in an analogous manner as one-photon-absorbing photosensitizers for both energy-transfer and photoredox reactions, as well as function in concert with a transition metal co-catalyst for metallaphotoredox C-C coupling reactions.

Modulating TTA efficiency through control of high energy triplet states

An ideal annihilator in triplet-triplet annihilation photon upconversion (TTA-UC) can achieve a maximum of 50% quantum efficiency. This spin statistical limit depends on the energies of the triplet states of the annihilator molecule, with only 20% quantum efficiencies possible in less-optimal energy configurations (E T2 ≤ 2E T1 ). Our work utilises three perylene analogues substituted with phenyl in sequential positions. When substituted in the bay position the isomer displays drastically lowered upconversion yields, which can be explained by the system going from an ideal to less-ideal energy configuration. We further concluded position 2 is the best site when functionalising perylene without a wish to affect its photophysics, thus demonstrating how molecular design can influence upconversion quantum efficiencies by controlling the energetics of triplet states through substitution. This will in turn help in the design of molecules that maximise upconversion efficiencies for materials applications.

Approaching the Spin-Statistical Limit in Visible-to-Ultraviolet Photon Upconversion

Triplet-triplet annihilation photon upconversion (TTA-UC) is a process in which triplet excitons combine to form emissive singlets and holds great promise in biological applications and for improving the spectral match in solar energy conversion. While high TTA-UC quantum yields have been reported for, for example, red-to-green TTA-UC systems, there are only a few examples of visible-to-ultraviolet (UV) transformations in which the quantum yield reaches 10%. In this study, we investigate the performance of six annihilators when paired with the sensitizer 2,3,5,6-tetra(9H-carbazol-9-yl)benzonitrile (4CzBN), a purely organic compound that exhibits thermally activated delayed fluorescence. We report a record-setting internal TTA-UC quantum yield (ΦUC,g) of 16.8% (out of a 50% maximum) for 1,4-bis((triisopropylsilyl)ethynyl)naphthalene, demonstrating the first example of a visible-to-UV TTA-UC system approaching the classical spin-statistical limit of 20%. Three other annihilators, of which 2,5-diphenylfuran has never been used for TTA-UC previously, also showed impressive performances with ΦUC,g above 12%. In addition, a new method to determine the rate constant of TTA is proposed, in which only time-resolved emission measurements are needed, circumventing the need for more challenging transient absorption measurements. The results reported herein represent an important step toward highly efficient visible-to-UV TTA-UC systems that hold great potential for driving high-energy photochemical reactions.

Photocleavage-based Photoresponsive Drug Delivery

Targeted drug delivery has been extensively studied in the last decade, whereas both passive and active targeting strategies still face many challenges, such as off-target drug release. Light-responsive drug delivery systems have been developed with high controllability and spatio-temporal resolution to improve drug efficacy and reduce off-target drug release. Photoremovable protecting groups are light-responsive moieties that undergo irreversible photocleavage reactions upon light irradiation. They can be covalently linked to the molecule of interest to control its structure and function with light. In this review, we will summarize recent applications of photocleavage technologies in nanoparticle-based drug delivery for precise targeting and controlled drug release, with a highlight of strategies to achieve long-wavelength light excitation. A greater understanding of these mechanisms and emerging studies will help design more efficient photocleavage-based nanosystems to advance photoresponsive drug delivery.

Red-Light-Mediated Photoredox Catalysis Enables Self-Reporting Nitric Oxide Release for Efficient Antibacterial Treatment

Nitric oxide (NO) serves as a key regulator of many physiological processes and as a potent therapeutic agent. The local delivery of NO is important to achieve target therapeutic outcomes due to the toxicity of NO at high concentrations. Although light stimulus represents a non-invasive tool with spatiotemporal precision to mediate NO release, many photoresponsive NO-releasing molecules can only respond to ultraviolet (UV) or near-UV visible light with low penetration and high phototoxicity. We report that coumarin-based NO donors with maximal absorbances at 328 nm can be activated under (deep) red-light (630 or 700 nm) irradiation in the presence of palladium(II) tetraphenyltetrabenzoporphyrin, enabling stoichiometric and self-reporting NO release with a photolysis quantum yield of 8 % via photoredox catalysis. This NO-releasing platform with ciprofloxacin loading can eradicate Pseudomonas aeruginosa biofilm in vitro and treat cutaneous abscesses in vivo.

Plasmon-Driven Catalytic Chemotherapy Augments Cancer Immunotherapy through Induction of Immunogenic Cell Death and Blockage of IDO Pathway

Clinical trials confirm the combination of indoleamine 2,3-dioxygenase (IDO) blockade and immunogenic chemotherapy represents a brilliant future in cancer therapy. However, it remains challenging to precisely activate chemo-immunotherapy in situ to avoid side effects from the systemic administrations and reverse the poor immunogenicity and immunosuppressive microenvironment in tumor sites. Herein, a hybrid nanomedicine ("RPMANB NPs") to co-deliver an IDO inhibitor (NLG919) and a chemotherapeutic prodrug to amplify the therapeutic benefits are designed. Attributed to the delicate surface engineering, the RPMANB NPs possess excellent pharmacokinetics and tumor accumulation. The loaded NLG919 are released inside cancer tissues/cells due to the collapse of the metal-organic framework platform triggered by the highly concentrated phosphate, reversing the immunosuppressive tumor microenvironment by suppressing IDO activity. The potent chemotherapeutic drug is precisely activated through a highly efficient plasmon-driven catalysis in the presence of near-infrared light, eliciting antitumor immunity by triggering immunogenic cell death and avoiding side effects through in situ activation of chemotherapy. In vivo studies demonstrate that the chemo-immunotherapy greatly suppresses the tumor growth by promoting intratumoral accumulation of cytotoxic T lymphocytes and downregulating regulatory T cells. This work establishes a robust delivery platform to overcome the current obstacles of tumor treatments by combining precisely activatable chemotherapy with immunotherapy.