A polymer controlled nucleation route towards the generalized growth of organic-inorganic perovskite single crystals

Recent Progress of Thin Crystal Engineering for Perovskite Solar Cells

Metal halide perovskite single crystals hold promise for photovoltaics with high efficiency and stability due to their superior optoelectronic properties and weak bulk ion migration. The past several years have witnessed rapid development of single-crystal perovskite solar cells (PSCs) with efficiency rocketed from 6.5 % to 24.3 %, however, which still lags behind their polycrystalline counterparts. Moreover, the poor device stability under light illumination is contrary to the high ion migration barrier of perovskite single crystals. The key limiting factors should be the low crystalline quality and high surface defect density of solution-grown thin single crystals. Under this circumstance, a review paper summarizing the recent progress and challenges will be instructive for future development of this emerging field. In this manuscript, the crystal engineering used to enhance carrier transport and suppress carrier recombination in vertical single-crystal PSCs will be summarized initially, including crystal growth, component control, surface and interface modification. Subsequently, the application of perovskite single crystals in lateral single-crystal PSCs will be discussed and compared with the conventionally vertical structure. Finally, the challenges and proposed strategies for the development of single-crystal PSCs are provided.

Flexible Single-Crystal Perovskite Photodetectors via Polymer-Controlled Transfer

The large-sized perovskite single-crystal sheet (SCS) serves as the ideal research platform for perovskite photodetectors due to its outstanding carrier photophysics, pronounced geometric aspect ratio, and ultrahigh material utilization rate. However, its performance in flexible device applications is relatively lackluster due to the rigid and brittle nature of the three-dimensional cubic lattices. In this work, the indium tin oxide (ITO)-based multimillimeter-sized MAPbBr3 SCS is transformed into MAPbI3 SCS via ion exchange strategy. Significantly, we proposed and implemented a polymer-controlled transfer strategy─utilizing the dichloromethane (DCM) solution of poly(methyl methacrylate) (PMMA)─to nondestructively transfer the whole perovskite SCS off the ITO substrates and subsequently adhere it onto a flexible polyethylene terephthalate (PET) substrate of interdigital electrode, thereby fabricating a lateral-structured photodetector with a PMMA-SCS-Au-PET multilayer configuration. The tight self-encapsulation between the top PMMA membrane and the bottom PET substrate imparts excellent waterproof stability and concurrently excellent mechanical flexibility to these devices; additionally, the MAPbI3 device exhibits comprehensively superior performance to the MAPbBr3 one. This work represents a proactive attempt and exploration of the high-performance advancement of large-sized SCS photodetectors, undoubtedly introducing novel momentum and solutions to this domain.

Single Crystal Ruddlesden-Popper and Dion-Jacobson Metal Halide Perovskites for Visible Light Photodetectors: Present Status and Future Perspectives

2D metal halide perovskites (MHPs), mainly the studied Ruddlesden-Popper (RP) and Dion-Jacobson (DJ) phases, have gained enormous popularity as optoelectronic materials owing to their self-assembled multiple quantum well structures, tunable semiconducting properties, and improved structural stability compared to their bulk 3D counterparts. The performance of polycrystalline thin film devices is limited due to the formation of defects and trap states. However, as studied so far, single crystal-based devices can provide a better platform to improve device performance and investigate their fundamental properties more reliably. This Review provides the first comprehensive report on the emerging field of RP and DJ perovskite single crystals and their use in visible light photodetectors of varied device configurations. This Review structurally summarizes the 2D MHP single crystal growth methods and the parameters that control the crystal growth process. In addition, the characterization techniques used to investigate their crystal properties are discussed. The review further provides detailed insights into the working mechanisms as well as the operational performance of 2D MHP single crystal photodetector devices. In the end, to outline the present status and future directions, this Review provides a forward-looking perspective concerning the technical challenges and bottlenecks associated with the developing field of RP and DJ perovskite single crystals. Therefore, this timely review will provide a detailed overview of the fast-growing field of 2D MHP single crystal-based photodetectors as well as ignite new concepts for a wide range of applications including solar cells, photocatalysts, solar H2 production, neuromorphic bioelectronics, memory devices, etc.

Identification and Suppression of Point Defects in Bromide Perovskite Single Crystals Enabling Gamma-Ray Spectroscopy

Methylammonium lead tribromide (MAPbBr3) stands out as the most easily grown wide-band-gap metal halide perovskite. It is a promising semiconductor for room-temperature gamma-ray (γ-ray) spectroscopic detectors, but no operational devices are realized. This can be largely attributed to a lack of understanding of point defects and their influence on detector performance. Here, through a combination of crystal growth design and defect characterization, including positron annihilation and impedance spectroscopy, the presence of specific point defects are identified and correlated to detector performance. Methylammonium (MA) vacancies, MA interstitials, and Pb vacancies are identified as the dominant charge-trapping defects in MAPbBr3 crystals, while Br vacancies caused doping. The addition of excess MABr reduces the MA and Br defects and so enables the detection of energy-resolved γ-ray spectra using a MAPbBr3 single-crystal device. Interestingly, the addition of formamidinium (FA) cations, which converted to methylformamidinium (MFA) cations by reaction with MA+ during crystal growth further reduced MA defects. This enabled an energy resolution of 3.9% for the 662 keV 137Cs line using a low bias of 100 V. The work provides direction toward enabling further improvements in wide-bandgap perovskite-based device performance by reducing detrimental defects.

Tuning Thermal Conductivity of Hybrid Perovskites through Halide Alloying

Tuning the thermal transport properties of hybrid halide perovskites is critical for their applications in optoelectronics, thermoelectrics, and photovoltaics. Here, an effective strategy is demonstrated to modulate the thermal transport property of hybrid perovskites by halide alloying. A highly tunable thermal conductivity of mixed-halide hybrid perovskites is achieved due to halide-alloying and structural distortion. The experimental measurements show that the room temperature thermal conductivity of MAPb(BrxI1- x)3 (x = 0─1) can be largely modulated from 0.27 ± 0.07 W m-1 K-1 (x = 0.5) to 0.47 ± 0.09 W m-1 K-1 (x = 1). Molecular dynamics simulations further demonstrate that the thermal conductivity reduction of hybrid halide perovskites results from the suppression of the mean free paths of the low-frequency acoustic and optical phonons. It is found that halide alloying and the induced structural distortion can largely increase the scatterings of optical and acoustic phonons, respectively. The confined diffusion of MA+ cations in the octahedra cage is found to act as an additional thermal transport channel in hybrid perovskites and can contribute around 10-20% of the total thermal conductivity. The findings provide a strategy for tailoring the thermal transport in hybrid halide perovskites, which may largely benefit their related applications.

Perovskite Single Crystals by Vacuum Evaporation Crystallization

Perovskite single crystals have attracted tremendous attention owing to their excellent optoelectronic properties and stability compared to typical multicrystal structures. However, the growth of high-quality perovskite single crystals (PSCs) generally relies on temperature gradients or the introduction of additives to promote crystal growth. In this study, a vacuum evaporation crystallization technique is developed that allows PSCs to be grown under extremely stable conditions at constant temperature and without requiring additives to promote crystal growth. The new method enables the growth of PSCs of unprecedented quality, that is, MAPbBr3 single crystals that exhibit an ultranarrow full width at half maximum of 0.00701°, which surpasses that of all previously reported values. In addition, the MAPbBr3 single crystals deliver exceptional optoelectronic performance, including a long carrier lifetime of 1006 ns, an ultralow trap-state density of 3.67 × 109 cm-3, and an ultrahigh carrier mobility of 185.86 cm2 V-1 s-1. This method is applicable to various types of PSCs, including organic-inorganic hybrids, fully inorganic structures, and low-dimensional structures.

Metal-Halide Perovskite Lasers: Cavity Formation and Emission Characteristics

Hybrid metal-halide perovskites (MHPs) have shown remarkable optoelectronic properties as well as facile and cost-effective processability. With the success of MHP solar cells and light-emitting diodes, MHPs have also exhibited great potential as gain media for on-chip lasers. However, to date, stable operation of optically pumped MHP lasers and electrically driven MHP lasers-an essential requirement for MHP laser's insertion into chip-scale photonic integrated circuits-is not yet demonstrated. The main obstacles include the instability of MHPs in the atmosphere, rudimentary MHP laser cavity patterning methods, and insufficient understanding of emission mechanisms in MHP materials and cavities. This review aims to provide a detailed overview of different strategies to improve the intrinsic properties of MHPs in the atmosphere and to establish an optimal MHP cavity patterning method. In addition, this review discusses different emission mechanisms in MHP materials and cavities and how to distinguish them.

Interface Engineering of Substrate-Integrated Single-Crystal Perovskite Wafers for Sensitive X-Ray Detection

Metal halide perovskite single crystals are emerging candidates for X-ray detection, however, it is challenging for growth of thickness-controlled single-crystal wafer on commercial backplanes, limiting their practical imaging application. Herein, integration of micrometer-thick methylammonium lead triiodide (MAPbI3) single-crystal wafer on indium tin oxide (ITO) substrates by methylamine (MA)-induced interface recrystallization is reported. Through selection of hole transport material with rich functional group, intimate interface contact with low trap density can be achieved, leading to superior carrier transport properties and homogeneous photoresponse. The as-fabricated X-ray detectors exhibit high sensitivity of 1.4 × 104 µC Gyair -1 cm-2 and low detection limit of 177 nGyair s-1, which are comparable to previous reports based on free-standing MAPbI3 bulk crystals. This work provides a feasible strategy for constructing substrate-integrated single-crystal perovskite wafers with controlled thickness, which may promote practical imaging application of perovskite X-ray detectors.

Universal growth of perovskite thin monocrystals from high solute flux for sensitive self-driven X-ray detection

Metal-halide perovskite thin monocrystals featuring efficient carrier collection and transport capabilities are well suited for radiation detectors, yet their growth in a generic, well-controlled manner remains challenging. Here, we reveal that mass transfer is one major limiting factor during solution growth of perovskite thin monocrystals. A general approach is developed to overcome synthetic limitation by using a high solute flux system, in which mass diffusion coefficient is improved from 1.7×10-10 to 5.4×10-10 m2 s-1 by suppressing monomer aggregation. The generality of this approach is validated by the synthesis of 29 types of perovskite thin monocrystals at 40-90 °C with the growth velocity up to 27.2 μm min-1. The as-grown perovskite monocrystals deliver a high X-ray sensitivity of 1.74×105 µC Gy-1 cm-2 without applied bias. The findings regarding limited mass transfer and high-flux crystallization are crucial towards advancing the preparation and application of perovskite thin monocrystals.

Interface-Tension-Assisted Temperature-Gradient Crystallization of High-Quality MAPbBr3 Perovskite Single Crystals with Low Defect Densities

Comprehensive understanding and precise manipulation of the crystallization process for organic-inorganic hybrid perovskite materials are crucial for advancing perovskite single-crystal optoelectronic technology. In this study, we theoretically and experimentally investigated the influence of interface tension on the synthesis of perovskite single crystals. On the basis of the understanding of the nucleation and growth mechanisms, we developed a polydimethylsiloxane-assisted temperature-gradient growth technique to prepare high-quality MAPbBr3 single crystals. Using this technique, we harvested some high-quality MAPbBr3 single crystals, with the narrowest reported full width at half-maximum (0.00806°) of X-ray diffraction rocking curve, the longest carrier lifetime of 1002 ns, and an ultralow trap-state density of 4.25 × 109 cm-3. Furthermore, the X-ray detector fabricated using our MAPbBr3 single crystal exhibited a high sensitivity of 7275 μC Gy1- cm2 and a low minimum detection limit of 0.67 μGy s-1. This paper presents a novel method to control the crystallization and growth processes of high-quality perovskite single crystals.

Nucleation-mediated growth of chiral 3D organic-inorganic perovskite single crystals

Although their zero- to two-dimensional counterparts are well known, three-dimensional chiral hybrid organic-inorganic perovskite single crystals have remained difficult because they contain no chiral components and their crystal phases belong to centrosymmetric achiral point groups. Here we report a general approach to grow single-crystalline 3D lead halide perovskites with chiroptical activity. Taking MAPbBr3 (MA, methylammonium) perovskite as a representative example, whereas achiral MAPbBr3 crystallized from precursors in solution by inverse temperature crystallization method, the addition of micro- or nanoparticles as nucleating agents promoted the formation of chiral crystals under a near equilibrium state. Experimental characterization supported by calculations showed that the chirality of the 3D APbX3 (where A is an ammonium ion and X is Cl, Br or mixed Cl-Br or Br-I) perovskites arises from chiral patterns of the A-site cations and their interaction with the [PbX6]4- octahedra in the perovskite structure. The chiral structure obeys the lowest-energy principle and thereby thermodynamically stable. The chiral 3D hybrid organic-inorganic perovskites served in a circularly polarized light photodetector prototype successfully.

Perovskite single-crystal thin films: preparation, surface engineering, and application

Perovskite single-crystal thin films (SCTFs) have emerged as a significant research hotspot in the field of optoelectronic devices owing to their low defect state density, long carrier diffusion length, and high environmental stability. However, the large-area and high-throughput preparation of perovskite SCTFs is limited by significant challenges in terms of reducing surface defects and manufacturing high-performance devices. This review focuses on the advances in the development of perovskite SCTFs with a large area, controlled thickness, and high quality. First, we provide an in-depth analysis of the mechanism and key factors that affect the nucleation and crystallization process and then classify the methods of preparing perovskite SCTFs. Second, the research progress on surface engineering for perovskite SCTFs is introduced. Third, we summarize the applications of perovskite SCTFs in photovoltaics, photodetectors, light-emitting devices, artificial synapse and field-effect transistor. Finally, the development opportunities and challenges in commercializing perovskite SCTFs are discussed.

Hydrophobic-Hydrophilic Block Copolymer Mediated Tuning of Halide Perovskite Photosensitive Device Stability and Efficiency

The polymer additive strategy provides a facile and cost-effective way for passivating defects and trap sites at the grain boundaries and interfaces and acting as a barrier against the external degradation factors in perovskite-based devices. However, limited literature exists discussing the integration of hydrophobic and hydrophilic polymer additives in the form of a copolymer within the perovskite films. The inherent difference in the chemical structure of these polymers and their interaction with perovskite components and the environment leads to critical differences in the respective polymer-perovskite films. The current work utilizes both homopolymer and copolymer strategies to understand the effect of polystyrene (PS) and polyethylene glycol (PEG), two common commodity polymers, over the physicochemical and electro-optical properties of the as-fabricated devices and the distribution of polymer chains across the depth of perovskite films. The hydrophobic PS integrated perovskite devices PS-MAPbI₃, 36 PS-b-1.4-PEG-MAPbI₃, and 21.5 PS-b-20-PEG-MAPbI₃ outperform hydrophilic PEG-MAPbI₃ and pristine MAPbI₃ devices and exhibit higher photocurrent, lower dark currents, and greater stability. A critical difference is also observed in the stability of devices, where rapid decay of performance is observed in the pristine MAPbI₃ films. The deterioration in performance is highly limited for hydrophobic polymer-MAPbI₃ films as they maintain 80% of their initial performance.

Additive-Enhanced Crystallization of Inorganic Perovskite Single Crystals for High-Sensitivity X-Ray Detection

Inorganic cesium lead halide perovskite single crystals are particularly intriguing to ionizing radiation detection by virtue of their material stability and high attenuation coefficients. However, the growth of high-quality inorganic perovskite single crystals remains challenging, mainly due to the limited solubility. In this work, an additive-enhanced crystallization method is proposed for cesium lead perovskites. The additive can remarkably increase the solubility of cesium bromide in dimethyl sulfoxide (DMSO) forming a balanced stoichiometric precursor solution, which prevents the formation of impurity phases. In addition, the additives would react with DMSO generating glyoxylic acid (GLA) via nucleophilic substitution and Kornblum oxidation reactions. The GLA can form stable PbBr₂ -DMSO-GLA complexes, which enables better crystallinity, uniformity and much longer carrier lifetimes for the grown single crystals. The X-ray detectors using the additive-enhanced crystals exhibit an ultra-high sensitivity of 3.0 × 10⁴  µC Gy_air ^-1 cm^-2 which is more than two orders of magnitude higher than that for the control devices.

Growth of Hybrid Perovskite Crystals from CH3NH3PbI3-xClx Solutions Subjected to Constant Solvent Evaporation Rates

In this work, we subjected hybrid lead-mixed halide perovskite (CH₃NH₃PbI_3-xCl_x) precursor inks to different solvent evaporation rates in order to facilitate the nucleation and growth of perovskite crystals. By controlling the temperature of perovskite solutions placed within open-air rings in precise volumes, we established control over the rate of solvent evaporation and, thus, over both the growth rate and the shape of perovskite crystals. Direct utilization of diluted lead-mixed halide perovskites solutions allowed us to control the nucleation and to favor the growth of only a low number of perovskite crystals. Such crystals exhibited a clear sixfold symmetry. While crystals formed at a lower range of temperatures (40-60 °C) exhibited a more compact dendritic shape, the crystals grown at a higher temperature range (80-110 °C) displayed a fractal dendritic morphology.

Bulk Perovskite Crystal Properties Determined by Heterogeneous Nucleation and Growth

In metal halide perovskites, charge transport in the bulk of the films is influenced by trapping and release and nonradiative recombination at ionic and crystal defects. Thus, mitigating the formation of defects during the synthesis process of perovskites from precursors is required for better device performance. An in-depth understanding of the nucleation and growth mechanisms of perovskite layers is crucial for the successful solution processing of organic-inorganic perovskite thin films for optoelectronic applications. In particular, heterogeneous nucleation, which occurs at the interface, must be understood in detail, as it has an effect on the bulk properties of perovskites. This review presents a detailed discussion on the controlled nucleation and growth kinetics of interfacial perovskite crystal growth. Heterogeneous nucleation kinetics can be controlled by modifying the perovskite solution and the interfacial properties of perovskites adjacent to the underlaying layer and to the air interface. As factors influencing the nucleation kinetics, the effects of surface energy, interfacial engineering, polymer additives, solution concentration, antisolvents, and temperature are discussed. The importance of the nucleation and crystal growth of single-crystal, nanocrystal, and quasi-two-dimensional perovskites is also discussed with respect to the crystallographic orientation.

A Melt-Quenched Luminescent Glass of an Organic-Inorganic Manganese Halide as a Large-Area Scintillator for Radiation Detection

Glass is a group of materials with appealing qualities, including simplicity in fabrication, durability, and high transparency, and they play a crucial role in the optics field. In this paper, a new organic-inorganic metal halide luminescent glass exhibiting >78 % transmittance at 506-800 nm range together with a high photoluminescence quantum yield (PLQY) of 28.5 % is reported through a low-temperature melt-quenching approach of pre-synthesized (HTPP)₂ MnBr₄ (HTPP=hexyltriphenylphosphonium) single crystal. Temperature-dependent X-ray diffraction, polarizing microscopy, and molecular dynamics simulations were combined to investigate the glass-crystal interconversion process, revealing the disordered nature of the glassy state. Benefiting from the transparent nature, (HTPP)₂ MnBr₄ glass yields an outstanding spatial resolution of 10 lp mm^-1 for X-ray imaging. The superb optical properties and facility of large-scale fabrication distinguish the organic-inorganic metal halide glass as a highly promising class of materials for optical devices.

Halide Perovskite Crystallization Processes and Methods in Nanocrystals, Single Crystals, and Thin Films

Halide perovskite semiconductors with extraordinary optoelectronic properties have been fascinatedly studied. Halide perovskite nanocrystals, single crystals, and thin films have been prepared for various fields, such as light emission, light detection, and light harvesting. High-performance devices rely on high crystal quality determined by the nucleation and crystal growth process. Here, the fundamental understanding of the crystallization process driven by supersaturation of the solution is discussed and the methods for halide perovskite crystals are summarized. Supersaturation determines the proportion and the average Gibbs free energy changes for surface and volume molecular units involved in the spontaneous aggregation, which could be stable in the solution and induce homogeneous nucleation only when the solution exceeds a required minimum critical concentration (C_min ). Crystal growth and heterogeneous nucleation are thermodynamically easier than homogeneous nucleation due to the existent surfaces. Nanocrystals are mainly prepared via the nucleation-dominated process by rapidly increasing the concentration over C_min , single crystals are mainly prepared via the growth-dominated process by keeping the concentration between solubility and C_min , while thin films are mainly prepared by compromising the nucleation and growth processes to ensure compactness and grain sizes. Typical strategies for preparing these three forms of halide perovskites are also reviewed.

Improved Crystallization Quality of FAPbBr3 Single Crystals by a Seeded Solution Method

Solution-grown hybrid perovskite, FAPbBr₃, has attracted great attentions recently due to its inspiring optoelectronic properties and low-cost preparation method. However, challenges of solution growth for FAPbBr₃ bulk crystals remain yet, such as uncontrollable crystalline morphologies, irregular shapes, and limited crystal sizes, which are attributed to the dense crystallization nucleus. In this work, we investigate the effects of growth conditions and seed behaviors on the crystallization quality and the yield of FAPbBr₃ single crystals. First, the spontaneous nucleation is tailored by optimizing the precursor concentration and heating rate. Furthermore, the seeded crystals are introduced to solve the issues related to the morphology and the yield of single crystals. Based on the above-mentioned investigations, an optimized growth method, a seeded solution method, under a heating rate of 0.1 °C/h is proposed, and centimeter-scale FAPbBr₃ single crystals with a very narrow FWHM of high-resolution X-ray diffraction rocking curves and a high yield of ∼100% of single crystals are obtained. The resulting FAPbBr₃ single crystal exhibits a bulk resistivity of 3.42 × 10⁹ Ω·cm and a superior I_ON/I_OFF ratio over 10⁴ under 405 nm light at a bias of 10 V. Finally, the pulse height spectra with an energy resolution of ∼21.4% are also achieved based on an AZO/FAPbBr₃/Au detector, illuminated using an uncollimated ²⁴¹Am@5.49 MeV α-particle source at room temperature. This modified seeded solution method shows great potential in preparing high-quality and high-yield perovskite single crystals.

Rationalizing the Effect of Polymer-Controlled Growth of Perovskite Single Crystals on Optoelectronic Properties

To improve and modulate the optoelectronic properties of single-crystal (SC) metal halide perovskites (MHPs), significant progress has been achieved. Polymer-assisted techniques are a great approach to control the growth rate of SCs effectively. However, the resultant optoelectrical properties induced by polymers are ambiguous and need to be taken into the consideration. In this study, we have synthesized methylammonium lead triiodide (MAPbI3) SCs using polyethylene glycol (PEG) and polystyrene (PS) polymers where PEG contains oxygen functionalities and PS does not. We studied the electrical properties of these SCs under dark and illumination conditions. It was observed that PEG-assisted SCs showed few defects with lower photocurrent as compared to the PS-assisted ones because of defect-mediated conductivity. The results are further verified by transient current response, responsivity, and capacitance-frequency measurements. The present study sheds light on the polymer selection for the growth of MHP SCs and their optoelectronic properties.

Halide perovskite single crystals: growth, characterization, and stability for optoelectronic applications

Recently, metal halide perovskite materials have received significant attention as promising candidates for optoelectronic applications with tremendous achievements, owing to their outstanding optoelectronic properties and facile solution-processed fabrication. However, the existence of a large number of grain boundaries in perovskite polycrystalline thin films causes ion migration, surface defects, and instability, which are detrimental to device applications. Compared with their polycrystalline counterparts, perovskite single crystals have been explored to realize stable and excellent properties such as a long diffusion length and low trap density. The development of growth techniques and physicochemical characterizations led to the widespread implementation of perovskite single-crystal structures in optoelectronic applications. In this review, recent progress in the growth techniques of perovskite single crystals, including advanced crystallization methods, is summarized. Additionally, their optoelectronic characterizations are elucidated along with a detailed analysis of their optical properties, carrier transport mechanisms, defect densities, surface morphologies, and stability issues. Furthermore, the promising applications of perovskite single crystals in solar cells, photodetectors, light-emitting diodes, lasers, and flexible devices are discussed. The development of suitable growth and characterization techniques contributes to the fundamental investigation of these materials and aids in the construction of highly efficient optoelectronic devices based on halide perovskite single crystals.

A Dual-Ligand Strategy to Regulate the Nucleation and Growth of Lead Chromate Photoanodes for Photoelectrochemical Water Splitting

Photoelectrochemical (PEC) water splitting for renewable hydrogen production has been regarded as a promising solution to utilize solar energy. However, most photoelectrodes still suffer from poor film quality and poor charge separation properties, mainly owing to the possible formation of detrimental defects including microcracks and grain boundaries. Herein, a molecular coordination engineering strategy is developed by employing acetylacetone (Acac) and poly(ethylene glycol) (PEG) dual ligands to regulate the nucleation and crystal growth of the lead chromate (PbCrO₄ ) photoanode, resulting in the formation of a high-quality film with large grain size, well-stitched grain boundaries, and reduced oxygen vacancies defects. With these efforts, the nonradiative charge recombination is efficiently suppressed, leading to the enhancement of its charge separation efficiency from 47% to 90%. After decorating with Co-Pi cocatalyst, the PbCrO₄ photoanode achieves a photocurrent density of 3.15 mA cm^-2 at 1.23 V (vs RHE under simulated AM1.5G) and an applied bias photon-to-current efficiency (ABPE) of 0.82%. This work provides a new strategy to modulate the nucleation and growth of high-quality photoelectrodes for efficient PEC water splitting.

Searching for High-Quality Halide Perovskite Single Crystals toward X-ray Detection

Metal halide perovskite materials, which combine outstanding physical properties, large absorption coefficient, tailored composition, and low-cost solution-processing, have aroused wide attention for use in various optoelectronic devices. Recently, perovskite single crystals have been rapidly outpacing traditional semiconductor materials in the field of radiation detection. As a prerequisite, achieving high-quality single crystals under controllable solution-phase growth must be tackled to fulfill their full potential as a new paradigm in this stagnated field. This Perspective summarizes the advances in X-ray detectors based on lead halide perovskite single crystals, presenting a comprehensive picture of the relationship among composition engineering, synthesis, and device properties. Additionally, we share our thoughts on several outstanding challenges of perovskite single crystals as promising X-ray detectors and propose possible approaches to the unresolved issues. We anticipate that this Perspective can open up new opportunities to improve their optoelectronic properties, which confers fascinating photonics applications with above and beyond state-of-the-art performance.

Surface Passivation of MAPbBr3 Perovskite Single Crystals to Suppress Ion Migration and Enhance Photoelectronic Performance

Recently, organometal halide perovskites (OHPs) have achieved significant advancement in photovoltaics, light-emitting diodes, X-ray detectors, and transistors. However, commercialization and practical applications were hindered by the notorious ion migration issue of OHPs. Here, we report a simple solvent-based surface passivation strategy with organic halide salts (methylammonium bromide (MABr) and phenylethylammonium bromide (PEABr)) to suppress the ion migration of MAPbBr₃ single crystals. The surface passivation effect is evidenced by the stronger photoluminescence (PL) intensity and extended PL lifetime. Using the pulse voltage and continuous voltage current-voltage measurements, we found that single crystals with surface passivation showed negligible hysteresis on the surface due to the suppression of ion migration. As a result, the dark current stability of coplanar structure devices was significantly improved. Moreover, the vertical structure X-ray detectors with PEABr treatment exhibited a high sensitivity of 15 280 μC Gy_air^-1 cm^-2 and a low detection limit of 87 nGy_air s^-1 under 5 V bias. The proposed technology would be a versatile tool to improve the performance of perovskite photoelectronic devices.

A Universal Cosolvent Evaporation Strategy Enables Direct Printing of Perovskite Single Crystals for Optoelectronic Device Applications

Solution-processed metal halide perovskite (MHP) single crystals (SCs) are in high demand for a growing number of printed electronic applications due to their superior optoelectronic properties compared to polycrystalline thin films. There is an urgent need to make SC fabrication facile, scalable, and compatible with the printed electronic manufacturing infrastructure. Here, a universal cosolvent evaporation (CSE) strategy is presented by which perovskite SCs and arrays are produced directly on substrates via printing and coating methods within minutes at room temperature from drying droplets. The CSE strategy successfully guides the supersaturation via controlled drying of droplets to suppress all crystallization pathways but one, and is shown to produce SCs of a wide variety of 3D, 2D, and mixed-cation/halide perovskites with consistency. This approach works with commonly used precursors and solvents, making it universal. Importantly, the SC consumes the precursor in the droplet, which enables the large-scale fabrication of SC arrays with minimal residue. Direct on-chip fabrication of 3D and 2D perovskite photodetector devices with outstanding performance is demonstrated. The approach shows that any MHP SC can now be manufactured on substrates using precision printing and scalable, high-throughput coating methods.

Growing MASnI3perovskite single-crystal films by inverse temperature crystallization

Perovskite single-crystal films are promising candidates for high-performance perovskite optoelectronic devices due to their optoelectrical properties. However, there are few reports of single-crystal films of tin based perovskites. Here, for the first time, we realize the controllable growth and preparation of lead-free tin perovskite MASnI₃single crystals via inverse temperature crystallization (ITC) strategy with γ-butyrolactone (GBL) as solvent. The solubility characteristics of MASnI₃in GBL are clarified by quantitative analytical method. Highly repeatability experiments are further demonstrated using this unique solubility and ITC properties. Sequentially, using space limiting method, tin perovskite MASnI₃single-crystal thin films are fabricated with micron-scale thickness, which is highly desired for efficient tin perovskite solar cells. Our MASnI₃single-crystal thin films show typical single-crystalline features including strongly optical absorbance with sharp absorption edges, pure-phase x-ray diffraction patterns, and absence of Sn(IV) x-ray photoelectron spectroscopy. We believe that our findings will further broaden the application prospects of tin perovskite MASnI₃single crystals and cause a new upsurge in exploring the field of lead-free perovskite single-crystal growth.

Three-Dimensional CA-LBM Numerical Model and Experimental Verification of Cs2AgBiBr6 Perovskite Single Crystals Grown by Solution Method

A three-dimensional cellular automata-lattice Boltzmann (CA-LBM) coupling model is established to simulate the facet growth process and the controlled cooling growth process of Cs2AgBiBr6 perovskite single crystals. In this model, the LBM method is used to calculate the real-time solute field, the CA method is used to simulate the crystal growth process driven by supersaturation of solute, and the geometric parameter g related to the adjacent grid is introduced to reduce the influence of grid anisotropy. The verification of the model is achieved by comparing the simulation results with the experimental results. The comparison results show that a smaller cooling rate is helpful for the growth of large-size single crystals, which verifies the rationality and correctness of the model.

Preparation of Low Grain Boundary Perovskite Crystals with Excellent Performance: The Inhibition of Ammonium Iodide

For the study, we prepared a low grain boundary three-dimensional CH3NH3PbI3 crystal (3D-MAPbI3) on TiO2 nanoarrays by inhibition of ammonium iodide and discussed the formation mechanism of the crystal. Based on the 3D-MAPbI3 crystal, solar cells showed modified performance with a power conversion efficiency (PCE) of up to 19.3%, which increases by 36.8% in contrast to the counterparts. We studied the internal photocurrent conversion process. The highest external quantum efficiency is up to 92%, and the electron injection efficiency is remarkably facilitated where the injection time decreases by 37.8% compared to the control group. In addition, based on 3D-MAPbI3, solar cells showed excellent air stability, which possesses 78.3% of the initial PCE, even though they were exposed to air for 30 days. Our results demonstrate a promising approach for the fabrication of perovskite solar cells with high efficiency and stability.