Modifying redox properties and local bonding of Co3O4 by CeO2 enhances oxygen evolution catalysis in acid

Crystalline-dependent surface reconstruction at low applied potential region for enhanced oxygen evolution reaction

Alkaline water electrolysis is apreferred technology for large-scale green hydrogen production. For most active transition metal-based catalysts during anodic oxygen evolution reaction (OER), the atomic structure of the anodic catalysts' surface often undergoes reconstruction to optimize the reaction path and enhance their catalytic activity. The design and maintenance of highly active sites during this reconstruction process remain critical and challenging for most OER catalysts. In this study, we explored the effects of crystal structures in pre-catalysts on surface reconstruction at low applied potential. Through experimental observation and theoretical calculation, we found out that catalysts with specific crystal structures exhibit superior surface remodeling ability, which enables them to better adapt to the conditions of the oxygen evolution reaction and achieve efficient catalysis. The discharge process enables the formation of abundant phosphorus vacancies on the surface, which in turn affects the efficiency of the entire oxygen evolution reaction. The optimized crystal structure of the catalyst results in an increase as high as 58.5 mA/cm2 for Ni5P4, which is twice as high as that observed for Ni2P. These results provide essential theoretical foundations and technical guidance for designing more efficient catalysts for oxygen evolution reactions.

Constructing heterogeneous interface between Co3O4 and RuO2 with enhanced electronic regulation for efficient oxygen evolution reaction at large current density

Exploring effective strategies for developing new high-efficiency catalysts for water splitting is essential for advancing hydrogen energy technology. Herein, Co3O4/RuO2 heterojunction interface is construct through ion exchange reaction and pyrolysis. The as-synthesized Co3O4/RuO2-4 exhibits outstanding oxygen evolution reaction (OER) activity at the current density of 100 mA cm-2 with a low overpotential of 276 mV, and remarkable stability (maintaining activity for 60 h at 100 mA cm-2). Experimental results and theoretical calculations reveal that the electrons around the heterogeneous interface transferred from RuO2 to Co3O4, resulting in electron redistribution and optimization of energy barriers for OER intermediates. This unique composite catalyst structure offers a new potential for designing efficient oxygen electrocatalysts at large current density.

Chromium-Induced High Covalent Co-O Bonds for Efficient Anodic Catalysts in PEM Electrolyzer

The proton exchange membrane water electrolyzer (PEMWE), crucial for green hydrogen production, is challenged by the scarcity and high cost of iridium-based materials. Cobalt oxides, as ideal electrocatalysts for oxygen evolution reaction (OER), have not been extensively applied in PEMWE, due to extremely high voltage and poor stability at large current density, caused by complicated structural variations of cobalt compounds during the OER process. Thus, the authors sought to introduce chromium into a cobalt spinel (Co3O4) catalyst to regulate the electronic structure of cobalt, exhibiting a higher oxidation state and increased Co-O covalency with a stable structure. In-depth operando characterizations and theoretical calculations revealed that the activated Co-O covalency and adaptable redox behavior are crucial for facilitating its OER activity. Both turnover frequency and mass activity of Cr-doped Co3O4 (CoCr) at 1.67 V (vs RHE) increased by over eight times than those of as-synthesized Co3O4. The obtained CoCr catalyst achieved 1500 mA cm-2 at 2.17 V and exhibited notable durability over extended operation periods - over 100 h at 500 mA cm-2 and 500 h at 100 mA cm-2, demonstrating promising application in the PEMWE industry.

Construction of heterogeneous interfaces for water activation and dissociation to synergistically boost overall water splitting

Construction of heterogeneous interfaces with dual active components to synergistically promote both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is an effective strategy for facilitating electrochemical water splitting, but the appropriate active component regulation via simple synthesis procedures is still challenging. Herein, the Co and Co2Mo3O8 active components are screened to construct effective heterogeneous interfaces and successfully integrated on Ni foam by thermal reduction of cobalt molybdate precursor. And this bifunctional electrode (Co/Co2Mo3O8/NF) required overpotentials of only 164 and 360 mV to drive the 100 mA cm-2 for HER and OER in alkaline media, respectively. Theoretical calculations showed that the electron transfer occurred from Co to Co2Mo3O8 at the interface, then the formed interfacial cobalt atoms with deficient electron were beneficial for water activation, and reduced energy barrier of water dissociation under the synergistic effect of Co2Mo3O8. Notably, the alkaline electrolyzer based on symmetric Co/Co2Mo3O8/NF electrodes generated 100 mA cm-2 at a voltage of only 1.75 V, surpassing commercially available precious-metal Pt/RuO2-based catalysts.

Surface charge modulation boosts electrocatalytic water splitting over iridium catalysts on a polyimide support

Developing high-performance iridium (Ir)-based catalysts with minimal precious Ir metal is a significant but challenging step towards the acidic oxygen evolution reaction (OER). Here, we report a high-performance OER catalyst with Ir nanoparticles on a polyimide support, where the polyimide support can effectively modulate the electronic structures of the Ir active sites for decreased thermodynamic barriers, but also enrich the local proton concentration near the Ir active sites, enhancing the OER rates.

Stabilizing atomic Ru species in conjugated sp2 carbon-linked covalent organic framework for acidic water oxidation

Suppressing the kinetically favorable lattice oxygen oxidation mechanism pathway and triggering the adsorbate evolution mechanism pathway at the expense of activity are the state-of-the-art strategies for Ru-based electrocatalysts toward acidic water oxidation. Herein, atomically dispersed Ru species are anchored into an acidic stable vinyl-linked 2D covalent organic framework with unique crossed π-conjugation, termed as COF-205-Ru. The crossed π-conjugated structure of COF-205-Ru not only suppresses the dissolution of Ru through strong Ru-N motifs, but also reduces the oxidation state of Ru by multiple π-conjugations, thereby activating the oxygen coordinated to Ru and stabilizing the oxygen vacancies during oxygen evolution process. Experimental results including X-ray absorption spectroscopy, in situ Raman spectroscopy, in situ powder X-ray diffraction patterns, and theoretical calculations unveil the activated oxygen with elevated energy level of O 2p band, decreased oxygen vacancy formation energy, promoted electrochemical stability, and significantly reduced energy barrier of potential determining step for acidic water oxidation. Consequently, the obtained COF-205-Ru displays a high mass activity with 2659.3 A g-1, which is 32-fold higher than the commercial RuO2, and retains long-term durability of over 280 h. This work provides a strategy to simultaneously promote the stability and activity of Ru-based catalysts for acidic water oxidation.

Water-hydroxide trapping in cobalt tungstate for proton exchange membrane water electrolysis

The oxygen evolution reaction is the bottleneck to energy-efficient water-based electrolysis for the production of hydrogen and other solar fuels. In proton exchange membrane water electrolysis (PEMWE), precious metals have generally been necessary for the stable catalysis of this reaction. In this work, we report that delamination of cobalt tungstate enables high activity and durability through the stabilization of oxide and water-hydroxide networks of the lattice defects in acid. The resulting catalysts achieve lower overpotentials, a current density of 1.8 amperes per square centimeter at 2 volts, and stable operation up to 1 ampere per square centimeter in a PEMWE system at industrial conditions (80°C) at 1.77 volts; a threefold improvement in activity; and stable operation at 1 ampere per square centimeter over the course of 600 hours.

Ultrafine Ir nanoparticles anchored on carbon nanotubes as efficient bifunctional oxygen catalysts for Zn-air batteries

Ultrafine iridium particles anchored on nitrogen-doped CNTs were obtained from Ir(ppy)3 and CNTs using a simple annealing method and acted as highly efficient bifunctional oxygen catalysts for Zn-air batteries. A synergistic effect, efficient *OH adsorption and rapid *OOH deprotonation were demonstrated from in situ FTIR spectroscopy, EIS and activation energy measurements.

Molten-Salt Electrochemical-Assisted Synthesis of the CeO2-OV@GC Composite-Supported Pt Clusters with a Pt-O-Ce Structure for the Oxygen Reduction Reaction

Highly active and robust Pt-based electrocatalysts for an oxygen reduction reaction (ORR) are of crucial significance for the development of proton exchange membrane fuel cells (PEMFCs). Herein, the high-loading and well-dispersive Pt clusters on graphitic carbon-supported CeO2 with abundant oxygen vacancies (PtAC/CeO2-OV@GC) were successfully fabricated by a molten-salt electrochemical-assisted method. The bonding of Pt with the highly electronegative O induces charge redistribution through the Pt-O-Ce structure, thus reducing the adsorption energies of oxygen-containing species. Such a PtAC/CeO2-OV@GC electrocatalyst exhibits a greatly enhanced ORR performance with a mass activity of 0.41 ± 0.02 A·mg-1Pt at 0.9 V versus a reversible hydrogen electrode, which is 2.7 times the value of a commercial Pt/C catalyst and shows negligible activity decay after 20000 cycles of accelerated degradation tests. It is anticipated that this work will provide enlightening guidance on the controllable synthesis and rational design of high-performance Pt-based electrocatalysts for PEMFCs.

Ceria-Optimized Oxygen-Species Exchange in Hierarchical Bimetallic Hydroxide for Electrocatalytic Water Oxidation

The utilization of rare earth elements to regulate the interaction between catalysts and oxygen-containing species holds promising prospects in the field of oxygen electrocatalysis. Through structural engineering and adsorption regulation, it is possible to achieve high-performance catalytic sites with a broken activity-stability tradeoff. Herein, this work fabricates a hierarchical CeO2/NiCo hydroxide for electrocatalytic oxygen evolution reaction (OER). This material exhibits superior overpotentials and enhanced stability. Multiple potential-dependent experiments reveal that CeO2 promotes oxygen-species exchange, especially OH- ions, between catalyst and environment, thereby optimizing the redox transformation of hydroxide and the adsorption of oxygen-containing intermediates during OER. This is attributed to the reduction in the adsorption energy barrier of Ni to *OH facilitated by CeO2, particularly the near-interfacial Ni sites. The less-damaging adsorbate evolution mechanism and the CeO2 hierarchical shell significantly enhance the structural robustness, leading to exceptional stability. Additionally, the observed "self-healing" phenomenon provides further substantiation for the accelerated oxygen exchange. This work provides a neat strategy for the synthesis of ceria-based complex hollow electrocatalysts, as well as an in-depth insight into the co-catalytic role of CeO2 in terms of oxygen transfer.

The mechanism of water oxidation using transition metal-based heterogeneous electrocatalysts

The water oxidation reaction, a crucial process for solar energy conversion, has garnered significant research attention. Achieving efficient energy conversion requires the development of cost-effective and durable water oxidation catalysts. To design effective catalysts, it is essential to have a fundamental understanding of the reaction mechanisms. This review presents a comprehensive overview of recent advancements in the understanding of the mechanisms of water oxidation using transition metal-based heterogeneous electrocatalysts, including Mn, Fe, Co, Ni, and Cu-based catalysts. It highlights the catalytic mechanisms of different transition metals and emphasizes the importance of monitoring of key intermediates to explore the reaction pathway. In addition, advanced techniques for physical characterization of water oxidation intermediates are also introduced, for the purpose of providing information for establishing reliable methodologies in water oxidation research. The study of transition metal-based water oxidation electrocatalysts is instrumental in providing novel insights into understanding both natural and artificial energy conversion processes.

Construction of Ultrafine PtIr Clusters Supported on Co3O4 Nanoflowers for Enhanced Overall Water Splitting

Green hydrogen production through electrochemical overall water splitting has suffered from sluggish oxygen evolution reaction (OER) kinetics, inferior conversion efficiency, and high cost. Herein, ultrafine PtIr clusters are synthesized via an electrodeposition method and decorated on the Co3O4 nanoflowers assembled by nanowires (PtIr-Co3O4). The encouraging performances in electrochemical OER and hydrogen evolution reaction (HER) are achieved over the PtIr-Co3O4 catalyst, with the overpotentials as low as 410 and 237 mV at 100 mA cm-2, respectively, outperforming the commercial IrO2 and Pt/C catalysts. Due to the ultralow loading of PtIr clusters, the PtIr-Co3O4 catalyst exhibits 1270 A gIr -1 for OER at the overpotential of 400 mV. Our detailed analyses also show that the strong interactions between the ultrafine PtIr clusters and the Co3O4 nanoflowers enable the PtIr-Co3O4 catalyst to afford 10 mA cm-2 for the overall water splitting at the potential of 1.57 V, accompanied by high durability for 100 h.

Synthetic Mn3Ce2O5-Cluster Mimicking the Oxygen-Evolving Center in Photosynthesis

The photosynthetic oxygen-evolving center (OEC) is a unique Mn4CaO5-cluster that catalyses water splitting into electrons, protons, and dioxygen. Precisely structural and functional mimicking of the OEC is a long-standing challenge and pressingly needed for understanding the structure-function relationship and catalytic mechanism of O-O bond formation. Herein we report two simple and robust artificial Mn3Ce2O5-complexes that display a remarkable structural similarity to the OEC in regarding of the ten-atom core (five metal ions and five oxygen bridges) and the alkyl carboxylate peripheral ligands. This Mn3Ce2O5-cluster can catalyse the water-splitting reaction on the surface of ITO electrode. These results clearly show that cerium can structurally and functionally replace both calcium and manganese in the cluster. Mass spectroscopic measurements demonstrate that the oxide bridges in the cluster are exchangeable and can be rapidly replaced by the isotopic oxygen of H2 18O in acetonitrile solution, which supports that the oxide bridge(s) may serve as the active site for the formation of O-O bond during the water-splitting reaction. These results would contribute to our understanding of the structure-reactivity relationship of both natural and artificial clusters and shed new light on the development of efficient water-splitting catalysts in artificial photosynthesis.

Unlocking Spin Gates of Transition Metal Oxides via Strain Stimuli to Augment Potassium Ion Storage

Transition metal oxides (TMOs) are key in electrochemical energy storage, offering cost-effectiveness and a broad potential window. However, their full potential is limited by poor understanding of their slow reaction kinetics and stability issues. This study diverges from conventional complex nano-structuring, concentrating instead on spin-related charge transfer and orbital interactions to enhance the reaction dynamics and stability of TMOs during energy storage processes. We successfully reconfigured the orbital degeneracy and spin-dependent electronic occupancy by disrupting the symmetry of magnetic cobalt (Co) sites through straightforward strain stimuli. The key to this approach lies in the unfilled Co 3d shell, which serves as a spin-dependent regulator for carrier transfer and orbital interactions within the reaction. We observed that the opening of these 'spin gates' occurs during a transition from a symmetric low-spin state to an asymmetric high-spin state, resulting in enhanced reaction kinetics and maintained structural stability. Specifically, the spin-rearranged Al-Co3O4 exhibited a specific capacitance of 1371 F g-1, which is 38 % higher than that of unaltered Co3O4. These results not only shed light on the spin effects in magnetic TMOs but also establish a new paradigm for designing electrochemical energy storage materials with improved efficiency.

Tailored (La0.2Pr0.2Nd0.2Tb0.2Dy0.2)2Ce2O7 as a Highly Active and Stable Nanocatalyst for the Oxygen Evolution Reaction

Designing highly active and robust catalysts for the oxygen evolution reaction is key to improving the overall efficiency of the water splitting reaction. It has been previously demonstrated that evaporation induced self-assembly (EISA) can be used to synthesize highly porous and high surface area cerate-based fluorite nanocatalysts, and that substitution of Ce with 50% rare earth (RE) cations significantly improves electrocatalyst activity. Herein, the defect structure of the best performing nanocatalyst in the series are further explored, Nd2Ce2O7, with a combination of neutron diffraction and neutron pair distribution function analysis. It is found that Nd3 + cation substitution for Ce in the CeO2 fluorite lattice introduces higher levels of oxygen Frenkel defects and induces a partially reduced RE1.5Ce1.5O5 + x phase with oxygen vacancy ordering. Significantly, it is demonstrated that the concentration of oxygen Frenkel defects and improved electrocatalytic activity can be further enhanced by increasing the compositional complexity (number of RE cations involved) in the substitution. The resulting novel compositionally-complex fluorite- (La0.2Pr0.2Nd0.2Tb0.2Dy0.2)2Ce2O7 is shown to display a low OER overpotential of 210 mV at a current density of 10 mAcm-2 in 1M KOH, and excellent cycling stability. It is suggested that increasing the compositional complexity of fluorite nanocatalysts expands the ability to tailor catalyst design.

Lattice Oxygen Activation through Deep Oxidation of Co4N by Jahn-Teller-Active Dopants for Improved Electrocatalytic Oxygen Evolution

Triggering the lattice oxygen oxidation mechanism is crucial for improving oxygen evolution reaction (OER) performance, because it could bypass the scaling relation limitation associated with the conventional adsorbate evolution mechanism through the direct formation of oxygen-oxygen bond. High-valence transition metal sites are favorable for activating the lattice oxygen, but the deep oxidation of pre-catalysts suffers from a high thermodynamic barrier. Here, taking advantage of the Jahn-Teller (J-T) distortion induced structural instability, we incorporate high-spin Mn3+ (t 2 g 3 e g 1 ${{t}_{2g}^{3}{e}_{g}^{1}}$ ) dopant into Co4N. Mn dopants enable a surface structural transformation from Co4N to CoOOH, and finally to CoO2, as observed by various in situ spectroscopic investigations. Furthermore, the reconstructed surface on Mn-doped Co4N triggers the lattice oxygen activation, as evidenced experimentally by pH-dependent OER, tetramethylammonium cation adsorption and online electrochemical mass spectrometry measurements of 18O-labelled catalysts. In general, this work not only offers the introducing J-T effect approach to regulate the structural transition, but also provides an understanding about the influence of the catalyst's electronic configuration on determining the reaction route, which may inspire the design of more efficient catalysts with activated lattice oxygen.

Mesoporous Electrocatalysts with p-n Heterojunctions for Efficient Electroreduction of CO2 and N2 to Urea

The electrocatalytic synthesis of high-value-added urea by activating N2 and CO2 is a green synthesis technology that has achieved carbon neutrality. However, the chemical adsorption and C-N coupling ability of N2 and CO2 on the surface of the catalyst are generally poor, greatly limiting the improvement of electrocatalytic activity and selectivity in electrocatalytic urea synthesis. Herein, novel hierarchical mesoporous CeO2/Co3O4 heterostructures are fabricated, and at an ultralow applied voltage of -0.2 V, the urea yield rate reaches 5.81 mmol g-1 h-1, with a corresponding Faraday efficiency of 30.05%. The hierarchical mesoporous material effectively reduces the mass transfer resistance of reactants and intermediates, making it easier for them to access active centers. The emerging space-charge regions at the heterointerface generate local electrophilic and nucleophilic regions, facilitating CO2 targeted adsorption in the electrophilic region and activation to produce *CO intermediates and N2 targeted adsorption in the nucleophilic region and activation to generate *N ═ N* intermediates. Then, the electrons in the σ orbitals of *N ═ N* intermediates can be easily accepted by the empty eg orbitals of Co3+ in CeO2/Co3O4, which presents a low-spin state (LS: t2g6eg0). Subsequently, *CO couples with *N ═ N* to produce the key intermediate *NCON*. Interestingly, it was discovered through in situ Raman spectroscopy that the CeO2/Co3O4 catalyst has a reversible spinel structure before and after the electrocatalytic reaction, which is due to the surface reconstruction of the catalyst during the electrocatalytic reaction process, producing amorphous active cobalt oxides, which is beneficial for improving electrocatalytic activity.

Heterophase Intermetallic Compounds for Electrocatalytic Hydrogen Production at Industrial-Scale Current Densities

Heterophase nanomaterials have sparked significant research interest in catalysis due to their distinctive properties arising from synergistic effects of different components and the formed phase boundary. However, challenges persist in the controlled synthesis of heterophase intermetallic compounds (IMCs), primarily due to the lattice mismatch of distinct crystal phases and the difficulty in achieving precise control of the phase transitions. Herein, orthorhombic/cubic Ru2Ge3/RuGe IMCs with engineered boundary architecture are synthesized and anchored on the reduced graphene oxide. The Ru2Ge3/RuGe IMCs exhibit excellent hydrogen evolution reaction (HER) performance with a high current density of 1000 mA cm-2 at a low overpotential of 135 mV. The presence of phase boundaries enhances charge transfer and improves the kinetics of water dissociation while optimizing the processes of hydrogen adsorption/desorption, thus boosting the HER performance. Moreover, an anion exchange membrane electrolyzer is constructed using Ru2Ge3/RuGe as the cathode electrocatalyst, which achieves a current density of 1000 mA cm-2 at a low voltage of 1.73 V, and the activity remains virtually undiminished over 500 h.

Oxygen Radical Coupling on Short-Range Ordered Ru Atom Arrays Enables Exceptional Activity and Stability for Acidic Water Oxidation

The discovery of efficient and stable electrocatalysts for oxygen evolution reaction (OER) in acid is vital for the commercialization of the proton-exchange membrane water electrolyzer. In this work, we demonstrate that short-range Ru atom arrays with near-ideal Ru-Ru interatomic distances and a unique Ru-O hybridization state can trigger direct O*-O* radical coupling to form an intermediate O*-O*-Ru configuration during acidic OER without generating OOH* species. Further, the Ru atom arrays suppress the participation of lattice oxygen in the OER and the dissolution of active Ru. Benefiting from these advantages, the as-designed Ru array-Co3O4 electrocatalyst breaks the activity/stability trade-off that plagues RuO2-based electrocatalysts, delivering an excellent OER overpotential of only 160 mV at 10 mA cm-2 in 0.5 M H2SO4 and outstanding durability during 1500 h operation, representing one of the best acid-stable OER electrocatalysts reported to date. 18O-labeled operando spectroscopic measurements together with theoretical investigations revealed that the short-range Ru atom arrays switched on an oxide path mechanism (OPM) during the OER. Our work not only guides the design of improved acidic OER catalysts but also encourages the pursuit of short-range metal atom array-based electrocatalysts for other electrocatalytic reactions.

Stabilizing Lattice Oxygen through Mn Doping in NiCo2O4-δ Spinel Electrocatalysts for Efficient and Durable Acid Oxygen Evolution

Design the electrocatalysts without noble metal is still a challenge for oxygen evolution reaction (OER) in acid media. Herein, we reported the manganese (Mn) doping method to decrease the concentration of oxygen vacancy (VO) and form the Mn-O structure adjacent octahedral sites in spinel NiCo2O4-δ (NiMn1.5Co3O4-δ), which highly enhanced the activity and stability of spinel NiCo2O4-δ with a low overpotential (η) of 280 mV at j=10 mA cm-2 and long-term stability of 80 h in acid media. The isotopic labelling experiment based on differential electrochemical mass spectrometry (DEMS) clearly demonstrated the lattice oxygen in NiMn1.5Co3O4-δ is more stable due to strong Mn-O bond and shows synergetic adsorbate evolution mechanism (SAEM) for acid OER. Density functional theory (DFT) calculations reveal highly increased oxygen vacancy formation energy (EVO) of NiCo2O4-δ after Mn doping. More importantly, the highly hydrogen bonding between Mn-O and *OOH adsorbed on adjacent Co octahedral sites promote the formation of *OO from *OOH due to the greatly enhanced charge density of O in Mn substituted sites.

Modulated Electronic Structure of Co3O4 by Single Atoms for Efficient Anodic Oxygen Evolution in Acid

The challenge of the practical application of a water electrolyzer system lies in the development of low-manufacturing cost, highly active, and stable electrocatalysts to replace the noble metal ones, in order to enable environmentally friendly hydrogen production on a large scale. Herein, a facile method is proposed for boosting the performance of Co3O4 through the incorporation of large-sized single atoms. Due to the larger ionic radius of rare earth metals than that of Co, the incorporation elongates the bond length of Co─O, resulting in the narrowed d-p band centers and the high spin configuration, which is favorable for the interaction and charge transfer with absorbent (*OH). As a result, the Ce-incorporated Co3O4 with the longest Co─O bond length exhibits the best oxygen evolution reaction (OER) performance, specifically, the turnover frequency is over 17 times higher than that of pristine Co3O4 nanosheet under an overpotential of 400 mV. Powered by a commercial Si solar cell, a two-electrode solar water-splitting device combining Ce-incorporated Co3O4 and Pt delivers a solar-to-hydrogen conversion efficiency of 13.53%. The strategy could provide a new insight for improving the performance of OER electrocatalysts in acid toward practical applications.

Defect-rich sonosensitizers based on CeO2 with Schottky heterojunctions for boosting sonodynamic/chemodynamic synergistic therapy

Sonodynamic therapy (SDT) has been recognized as a promising treatment for cancer due to its advantages of superior specificity, non-invasiveness, and deep tissue penetration. However, the antitumor effect of SDT remains restricted by the limited generation of reactive oxygen species (ROS) due to the lack of highly efficient sonosensitizers. In this work, we developed the novel sonosensitizer Pt/CeO2-xSx by constructing oxygen defects through S doping and Pt loading in situ. Large amounts of oxygen defects have been obtained by S doping, endowing Pt/CeO2-xSx with the ability to suppress electron-hole recombination, further promoting ROS production. Moreover, the introduction of Pt nanoparticles can not only produce oxygen in situ for relieving hypoxia but also form a Schottky heterojunction with CeO2-xSx for further inhibiting electron-hole recombination. In addition, Pt/CeO2-xSx could effectively deplete overexpressed glutathione (GSH) via redox reactions, amplifying oxidative stress in the tumor microenvironment (TME). Combined with the excellent POD-mimetic activity, Pt/CeO2-xSx can achieve highly efficient synergistic therapy of SDT and chemodynamic therapy (CDT). All these findings demonstrated that Pt/CeO2-xSx has great potential for cancer therapy, and this work provides a promising direction for designing and constructing efficient sonosensitizers.

Novel high-pressure/high-temperature reactor cell for in situ and operando x-ray absorption spectroscopy studies of heterogeneous catalysts at synchrotron facilities

This paper presents the development of a novel high-pressure/high-temperature reactor cell dedicated to the characterization of catalysts using synchrotron x-ray absorption spectroscopy under operando conditions. The design of the vitreous carbon reactor allows its use as a plug-flow reactor, monitoring catalyst samples in a powder form with a continuous gas flow at high-temperature (up to 1000 °C) and under high pressure (up to 1000 bar) conditions, depending on the gas environment. The high-pressure/high-temperature reactor cell incorporates an automated gas distribution system and offers the capability to operate in both transmission and fluorescence detection modes. The operando x-ray absorption spectroscopy results obtained on a bimetallic InCo catalyst during CO2 hydrogenation reaction at 300 °C and 50 bar are presented, replicating the conditions of a conventional microreactor. The complete setup is available for users and permanently installed on the Collaborating Research Groups French Absorption spectroscopy beamline in Material and Environmental (CRG-FAME) sciences and French Absorption spectroscopy beamline in Material and Environmental sciences at ultra-high dilution (FAME-UHD) beamlines (BM30 and BM16) at the European Synchrotron Radiation Facility in Grenoble, France.

Activating Inert Crystal Face via Facet-Dependent Quench-Engineering for Electrocatalytic Water Oxidation

Developing a facile strategy to activate the inert crystal face of an electrocatalyst is critical to full-facet utilization, yet still challenging. Herein, the electrocatalytic activity of the inert crystal face is activated by quenching Co3O4 cubes and hexagonal plates with different crystal faces in Fe(NO3)3 solution, and the regulation mechanism of facet-dependent quench-engineering is further revealed. Compared to the Co3O4 cube with exposed {100} facet, the Co3O4 hexagonal plate with exposed {111} facet is more responsive to quenching, accompanied by a rougher surface, richer defect, and more Fe doping. Theoretical calculations indicate that the {111} facet has a more open structure with lower defect formation energy and Fe doping energy, ensuring its electronic and coordination structure is easier to optimize. Therefore, quench-engineering largely increases the catalytic activity of {111) facet for oxygen evolution reaction by 13.2% (the overpotential at 10 mA cm-2 decreases from 380 to 330 mV), while {100} facet only increases by 7.6% (from 393 to 363 mV). The quenched Co3O4 hexagonal plate exhibits excellent electrocatalytic activity and stability in both zinc-air battery and water-splitting. The work reveals the influence mechanism of crystal face on quench-engineering and inspires the activation of the inert crystal face.

Reconstructing Hydrogen-Bond Network for Efficient Acidic Oxygen Evolution

Developing highly active oxygen evolution reaction (OER) catalysts in acidic conditions is a pressing demand for proton-exchange membrane water electrolysis. Manipulating proton character at the electrified interface, as the crux of all proton-coupled electrochemical reactions, is highly desirable but elusive. Herein we present a promising protocol, which reconstructs a connected hydrogen-bond network between the catalyst-electrolyte interface by coupling hydrophilic units to boost acidic OER activity. Modelling on N-doped-carbon-layer clothed Mn-doped-Co3O4 (Mn-Co3O4@CN), we unravel that the hydrogen-bond interaction between CN units and H2O molecule not only drags the free water to enrich the surface of Mn-Co3O4 but also serves as a channel to promote the dehydrogenation process. Meanwhile, the modulated local charge of the Co sites from CN units/Mn dopant lowers the OER barrier. Therefore, Mn-Co3O4@CN surpasses RuO2 at high current density (100 mA cm-2 @ ~538 mV).

ZnO-CeO2 Hollow Nanospheres for Selective Determination of Dopamine and Uric Acid

ZnO-CeO2 hollow nanospheres have been successfully synthesized via the hard templating method, in which CeO2 is used as the support skeleton to avoid ZnO agglomeration. The synthesized ZnO-CeO2 hollow nanospheres possess a large electrochemically active area and high electron transfer owing to the high specific surface area and synergistic effect of ZnO and CeO2. Due to the above advantages, the resulting ZnO-CeO2 hollow spheres display high sensitivities of 1122.86 μA mM-1 cm-2 and 908.53 μA mM-1 cm-2 under a neutral environment for the selective detection of dopamine and uric acid. The constructed electrochemical sensor shows excellent selectivity, stability and recovery for the selective analysis of dopamine and uric acid in actual samples. This study provides a valuable strategy for the synthesis of ZnO-CeO2 hollow nanospheres via the hard templating method as electrocatalysts for the selective detection of dopamine and uric acid.

γ-MnO2 as an Electron Reservoir for RuO2 Oxygen Evolution Catalyst in Acidic Media

Developing highly active and durable catalysts in acid conditions remains an urgent issue due to the sluggish kinetics of oxygen evolution reaction (OER). Although RuO2 has been a state-of-the-art commercial catalyst for OER, it encounters poor stability and high cost. In this study, the electronic reservoir regulation strategy is proposed to promote the performance of acidic water oxidation via constructing a RuO2/MnO2 heterostructure supported on carbon cloth (CC) (abbreviated as RuO2/MnO2/CC). Theoretical and experimental results reveal that MnO2 acts as an electron reservoir for RuO2. It facilitates electron transfer from RuO2, enhancing its activity prior to OER, and donates electrons to RuO2, improving its stability after OER. Consequently, RuO2/MnO2/CC exhibits better performance compared to commercial RuO2, with an ultrasmall overpotential of 189 mV at 10 mA cm-2 and no signs of deactivation even after 800 h of electrolysis in 0.5 m H2SO4 at 10 mA cm-2. When applied as the anode in a proton exchange membrane water electrolyzer, the cost-efficient RuO2/MnO2/CC catalyst only requires a cell voltage of 1.661 V to achieve the water-splitting current of 1 A cm-2, and the noble metal cost is as low as US$ 0.00962 cm-2, indicating potential for practical applications.

Surface oxidation/spin state determines oxygen evolution reaction activity of cobalt-based catalysts in acidic environment

Co-based catalysts are promising candidates to replace Ir/Ru-based oxides for oxygen evolution reaction (OER) catalysis in an acidic environment. However, both the reaction mechanism and the active species under acidic conditions remain unclear. In this study, by combining surface-sensitive soft X-ray absorption spectroscopy characterization with electrochemical analysis, we discover that the acidic OER activity of Co-based catalysts are determined by their surface oxidation/spin state. Surfaces composed of only high-spin CoII are found to be not active due to their unfavorable water dissociation to form CoIII-OH species. By contrast, the presence of low-spin CoIII is essential, as it promotes surface reconstruction of Co oxides and, hence, OER catalysis. The correlation between OER activity and Co oxidation/spin state signifies a breakthrough in defining the structure-activity relationship of Co-based catalysts for acidic OER, though, interestingly, such a relationship does not hold in alkaline and neutral environments. These findings not only help to design efficient acidic OER catalysts, but also deepen the understanding of the reaction mechanism.

Research Advances of Non-Noble Metal Catalysts for Oxygen Evolution Reaction in Acid

Water splitting is an important way to obtain hydrogen applied in clean energy, which mainly consists of two half-reactions: hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). However, the kinetics of the OER of water splitting, which occurs at the anode, is slow and inefficient, especially in acid. Currently, the main OER catalysts are still based on noble metals, such as Ir and Ru, which are the main active components. Hence, the exploration of new OER catalysts with low cost, high activity, and stability has become a key issue in the research of electrolytic water hydrogen production technology. In this paper, the reaction mechanism of OER in acid was discussed and summarized, and the main methods to improve the activity and stability of non-noble metal OER catalysts were summarized and categorized. Finally, the future prospects of OER catalysts in acid were made to provide a little reference idea for the development of advanced OER catalysts in acid in the future.

Schottky Barrier-Based Built-In Electric Field for Enhanced Tumor Photodynamic Therapy

Photodynamic therapy's antitumor efficacy is hindered by the inefficient generation of reactive oxygen species (ROS) due to the photogenerated electron-hole pairs recombination of photosensitizers (PS). Therefore, there is an urgent need to develop efficient PSs with enhanced carrier dynamics. Herein, we designed Schottky junctions composed of cobalt tetroxide and palladium nanocubes (Co3O4@Pd) with a built-in electric field as effective PS. The built-in electric field enhanced photogenerated charge separation and migration, resulting in the generation of abundant electron-hole pairs and allowing effective production of ROS. Thanks to the built-in electric field, the photocurrent intensity and carrier lifetime of Co3O4@Pd were approximately 2 and 3 times those of Co3O4, respectively. Besides, the signal intensity of hydroxyl radical and singlet oxygen increased to 253.4% and 135.9%, respectively. Moreover, the localized surface plasmon resonance effect of Pd also enhanced the photothermal conversion efficiency of Co3O4@Pd to 40.50%. In vitro cellular level and in vivo xenograft model evaluations demonstrated that Co3O4@Pd could generate large amounts of ROS, trigger apoptosis, and inhibit tumor growth under near-infrared laser irradiation. Generally, this study reveals the contribution of the built-in electric field to improving photodynamic performance and provides new ideas for designing efficient inorganic PSs.

Nickel molybdate/cobalt iron carbonate hydroxide heterojunction with oxygen vacancy enables interfacial synergism to trigger oxygen evolution reaction

The development of electrocatalysts with excellent performance toward oxygen evolution reaction (OER) for the production of hydrogen is of great significance to alleviate energy crisis and environmental pollution. Herein, the heterostructure (NMO/FCHC-0.4) was fabricated by the coupling growth of NiMoO4 (NMO) and cobalt iron carbonate hydroxide (FCHC) on nickel foam as an electrocatalyst for OER. The interfacial synergy on NMO/FCHC-0.4 heterojunction can promote the interfacial electron redistribution, affect the center position of d band, optimize the adsorption of intermediate, and improve the conductivity. Beyond, oxygen defect sites are conducive to the adsorption of intermediates, and increase the number of active sites. Real-time OER kinetic simulation revealed that the interfacial synergism and molybdate could reduce the adsorption of hydroxide, promote the deprotonation step of M-OH, and facilitate the formation of M-OOH (M represents the metal active site). As a result, NMO/FCHC-0.4 displays excellent OER electrocatalytic performance with an overpotential of 250/280 mV at the current density 100/200 mA cm-2 and robust stability at 100 mA cm-2 for 100 h. This work provides deep insights into the roles of interfacial electronic modulation and oxygen vacancy to design high-efficiency electrocatalysts for OER.

Facile synthesis of FeNi alloy-supported N-doped Mo2C hollow nanospheres for the oxygen evolution reaction

The rapid depletion of fossil fuels results in significant environmental pollution. Consequently, researching environmentally friendly and cost-effective electrocatalysts with exceptional oxygen evolution reaction (OER) capabilities holds immense importance in enhancing the efficient utilization of resources. In this paper, a straightforward and cost-effective method was employed to produce Fe-Ni alloy-supported N-doped carbon hollow nanospheres (FeNi/Mo2C/NC) using self-assembled molybdenum dopamine spheres (Mo-PDA-HS) as a substrate. The inclusion of iron and nickel addressed the issue of aggregation and collapse in Mo-PDA-HS nanostructures at high temperatures, while adjusting the electronic structure of the composites to achieve efficient OER activity. The composite displayed a low overpotential (η10 mA = 304 mV) and a minimal Tafel slope (41.8 mV/dec-1). This study introduces a simple strategy for constructing structurally robust and non-aggregating Mo2C nanostructures, along with a direct method for designing cost-effective and high-performance catalysts for OER.

Cations induced in situ electrochemical amorphization for enhanced oxygen evolution reaction

Surface reconstruction is widely existed on the surface of transition metal-based catalysts under operando oxygen evolution reaction (OER) condition. The design and optimize the reconstruction process are essential to achieve high electrochemical active surface and thus facilitate the reaction kinetics, whereas still challenge. Herein, we exploit electrolyte engineering to regulate reconstruction on the surface of Fe2O3 catalysts under operando OER conditions. The intentional added cations in electrolyte can participate the reconstruction process and realize a desirable crystalline to amorphous structure conversion, contributing abundant well-defined active sites. Spectroscopic measurements and density functional theory calculation provide insight into the underlying role of amorphous structure for electron transfer, mass transport, and intermediate adsorption. With the assistant of Co2+ cations, the enhanced current density as large as 17.9 % can be achieved at 2.32 V (vs RHE). The present results indicate the potential of electrolyte engineering for regulating the reconstruction process and provide a generalized in-situ strategy for advanced catalysts design.

Surface engineering for stable electrocatalysis

In recent decades, significant progress has been achieved in rational developments of electrocatalysts through constructing novel atomistic structures and modulating catalytic surface topography, realizing substantial enhancement in electrocatalytic activities. Numerous advanced catalysts were developed for electrochemical energy conversion, exhibiting low overpotential, high intrinsic activity, and selectivity. Yet, maintaining the high catalytic performance under working conditions with high polarization and vigorous microkinetics that induce intensive degradation of surface nanostructures presents a significant challenge for commercial applications. Recently, advanced operando and computational techniques have provided comprehensive mechanistic insights into the degradation of surficial functional structures. Additionally, various innovative strategies have been devised and proven effective in sustaining electrocatalytic activity under harsh operating conditions. This review aims to discuss the most recent understanding of the degradation microkinetics of catalysts across an entire range of anodic to cathodic polarizations, encompassing processes such as oxygen evolution and reduction, hydrogen reduction, and carbon dioxide reduction. Subsequently, innovative strategies adopted to stabilize the materials' structure and activity are highlighted with an in-depth discussion of the underlying rationale. Finally, we present conclusions and perspectives regarding future research and development. By identifying the research gaps, this review aims to inspire further exploration of surface degradation mechanisms and rational design of durable electrocatalysts, ultimately contributing to the large-scale utilization of electroconversion technologies.

Electrical-Driven Directed-Evolution of Copper Nanowires Catalysts for Efficient Nitrate Reduction to Ammonia

The electrocatalytic conversion of nitrate (NO3 - ) to NH3 (NO3 RR) at ambient conditions offers a promising alternative to the Haber-Bosch process. The pivotal factors in optimizing the proficient conversion of NO3 - into NH3 include enhancing the adsorption capabilities of the intermediates on the catalyst surface and expediting the hydrogenation steps. Herein, the Cu/Cu2 O/Pi NWs catalyst is designed based on the directed-evolution strategy to achieve an efficient reduction of NO3 ‾. Benefiting from the synergistic effect of the OV -enriched Cu2 O phase developed during the directed-evolution process and the pristine Cu phase, the catalyst exhibits improved adsorption performance for diverse NO3 RR intermediates. Additionally, the phosphate group anchored on the catalyst's surface during the directed-evolution process facilitates water electrolysis, thereby generating Hads on the catalyst surface and promoting the hydrogenation step of NO3 RR. As a result, the Cu/Cu2 O/Pi NWs catalyst shows an excellent FE for NH3 (96.6%) and super-high NH3 yield rate of 1.2 mol h-1  gcat. -1 in 1 m KOH and 0.1 m KNO3 solution at -0.5 V versus RHE. Moreover, the catalyst's stability is enhanced by the stabilizing influence of the phosphate group on the Cu2 O phase. This work highlights the promise of a directed-evolution approach in designing catalysts for NO3 RR.

Mesoporous RE0.5Ce0.5O2-x Fluorite Electrocatalysts for the Oxygen Evolution Reaction

Developing highly active and stable electrocatalysts for the oxygen evolution reaction (OER) is key to improving the efficiency and practical application of various sustainable energy technologies including water electrolysis, CO2 reduction, and metal air batteries. Here, we use evaporation-induced self-assembly (EISA) to synthesize highly porous fluorite nanocatalysts with a high surface area. In this study, we demonstrate that a 50% rare-earth cation substitution for Ce in the CeO2 fluorite lattice improves the OER activity and stability by introducing oxygen vacancies into the host lattice, which results in a decrease in the adsorption energy of the OH* intermediate in the OER. Among the binary fluorite compositions investigated, Nd2Ce2O7 is shown to display the lowest OER overpotential of 243 mV, achieved at a current density of 10 mA cm-2, and excellent cycling stability in an alkaline medium. Importantly, we demonstrate that rare-earth oxide OER electrocatalysts with high activity and stability can be achieved using the EISA synthesis route without the incorporation of transition and noble metals.

Lattice oxygen activation and local electric field enhancement by co-doping Fe and F in CoO nanoneedle arrays for industrial electrocatalytic water oxidation

Oxygen evolution reaction (OER) is critical to renewable energy conversion technologies, but the structure-activity relationships and underlying catalytic mechanisms in catalysts are not fully understood. We herein demonstrate a strategy to promote OER with simultaneously achieved lattice oxygen activation and enhanced local electric field by dual doping of cations and anions. Rough arrays of Fe and F co-doped CoO nanoneedles are constructed, and a low overpotential of 277 mV at 500 mA cm-2 is achieved. The dually doped Fe and F could cooperatively tailor the electronic properties of CoO, leading to improved metal-oxygen covalency and stimulated lattice oxygen activation. Particularly, Fe doping induces a synergetic effect of tip enhancement and proximity effect, which effectively concentrates OH- ions, optimizes reaction energy barrier and promotes O2 desorption. This work demonstrates a conceptual strategy to couple lattice oxygen and local electric field for effective electrocatalytic water oxidation.

Achieving High-Performance Electrocatalytic Water Oxidation on Ni(OH)2 with Optimized Intermediate Binding Energy Enabled by S-Doping and CeO2 -Interfacing

The adsorption energy of the reaction intermediates has a crucial influence on the electrocatalytic activity. Ni-based materials possess high oxygen evolution reaction (OER) performance in alkaline, however too strong binding of *OH and high energy barrier of the rate-determining step (RDS) severely limit their OER activity. Herein, a facile strategy is shown to fabricate novel vertical nanorod-like arrays hybrid structure with the interface contact of S-doped Ni(OH)2 and CeO2 in situ grown on Ni foam (S-Ni(OH)2 /CeO2 /NF) through a one-pot route. The alcohol molecules oxidation reaction experiments and theoretical calculations demonstrate that S-doping and CeO2 -interfacing significantly modulate the binding energies of OER intermediates toward optimal value and reduce the energy barrier of the RDS, contributing to remarkable OER activity for S-Ni(OH)2 /CeO2 /NF with an ultralow overpotential of 196 mV at 10 mA cm-2 and long-term durability over 150 h for the OER. This work offers an efficient doping and interfacing strategy to tune the binding energy of the OER intermediates for obtaining high-performance electrocatalysts.

RuO2 Catalysts for Electrocatalytic Oxygen Evolution in Acidic Media: Mechanism, Activity Promotion Strategy and Research Progress

Proton Exchange Membrane Water Electrolysis (PEMWE) under acidic conditions outperforms alkaline water electrolysis in terms of less resistance loss, higher current density, and higher produced hydrogen purity, which make it more economical in long-term applications. However, the efficiency of PEMWE is severely limited by the slow kinetics of anodic oxygen evolution reaction (OER), poor catalyst stability, and high cost. Therefore, researchers in the past decade have made great efforts to explore cheap, efficient, and stable electrode materials. Among them, the RuO2 electrocatalyst has been proved to be a major promising alternative to Ir-based catalysts and the most promising OER catalyst owing to its excellent electrocatalytic activity and high pH adaptability. In this review, we elaborate two reaction mechanisms of OER (lattice oxygen mechanism and adsorbate evolution mechanism), comprehensively summarize and discuss the recently reported RuO2-based OER electrocatalysts under acidic conditions, and propose many advanced modification strategies to further improve the activity and stability of RuO2-based electrocatalytic OER. Finally, we provide suggestions for overcoming the challenges faced by RuO2 electrocatalysts in practical applications and make prospects for future research. This review provides perspectives and guidance for the rational design of highly active and stable acidic OER electrocatalysts based on PEMWE.

Synthesis of core@shell catalysts guided by Tammann temperature

Designing high-performance thermal catalysts with stable catalytic sites is an important challenge. Conventional wisdom holds that strong metal-support interactions can benefit the catalyst performance, but there is a knowledge gap in generalizing this effect across different metals. Here, we have successfully developed a generalizable strong metal-support interaction strategy guided by Tammann temperatures of materials, enabling functional oxide encapsulation of transition metal nanocatalysts. As an illustrative example, Co@BaAl2O4 core@shell is synthesized and tracked in real-time through in-situ microscopy and spectroscopy, revealing an unconventional strong metal-support interaction encapsulation mechanism. Notably, Co@BaAl2O4 exhibits exceptional activity relative to previously reported core@shell catalysts, displaying excellent long-term stability during high-temperature chemical reactions and overcoming the durability and reusability limitations of conventional supported catalysts. This pioneering design and widely applicable approach has been validated to guide the encapsulation of various transition metal nanoparticles for environmental tolerance functionalities, offering great potential to advance energy, catalysis, and environmental fields.

Interface engineering of Ruddlesden-Popper perovskite/CeO2/carbon heterojunction for rechargeable zinc-air batteries

The development of noble metal-based bifunctional electrocatalysts is the key to driving the sluggish oxygen reduction/evolution reaction (ORR/OER) for rechargeable zinc-air battery applications. There is an urgent need to design and construct robust and cost-efficient bifunctional electrocatalysts. Herein, an interface engineering strategy of Ruddlesden-Popper (RP) perovskite/CeO2/carbon heterojunction with core-shell nanostructures is described. Ce-based metal-organic framework derived CeO2-C nanosheets are decorated on the surface of RP type perovskite Pr3Sr(Ni0.5Co0.5)3O10-δ (PSNC) nanofibers. Benefiting from the favorable conductivity, abundant oxygen vacancies and strong interfacial coupling, the hierarchical CeO2-C/PSNC electrode delivers a half-wave potential of 0.78 V (ORR), and an OER overpotential of 370 mV at 10 mA cm-2, respectively. A liquid rechargeable zinc-air battery (ZAB) assembled with CeO2-C/PSNC electrocatalysts as the air cathode exhibits a peak power density of 161 mW cm-2 and a long-term cycling life over 219 h. In addition, the CeO2-C/PSNC-based all-solid-state cable-type ZAB provides a high open-circuit voltage (∼1.44 V), good flexibility and durability. Our study opens a new insight into the design of efficient electrocatalysts for rechargeable ZABs by constructing hierarchical heterojunctions.

Importing Antibonding-Orbital Occupancy through Pd-O-Gd Bridge Promotes Electrocatalytic Oxygen Reduction

The active-site density, intrinsic activity, and durability of Pd-based materials for oxygen reduction reaction (ORR) are critical to their application in industrial energy devices. This work constructs a series of carbon-based rare-earth (RE) oxides (Gd2 O3 , Sm2 O3 , Eu2 O3 , and CeO2 ) by using RE metal-organic frameworks to tune the ORR performance of the Pd sites through the Pd-REx Oy interface interaction. Taking Pd-Gd2 O3 /C as a representative, it is identified that the strong coupling between Pd and Gd2 O3 induces the formation of the Pd-O-Gd bridge, which triggers charge redistribution of Pd and Gd2 O3 . The screened Pd-Gd2 O3 /C exhibits impressive ORR performance with high onset potential (0.986 VRHE ), half-wave potential (0.877 VRHE ), and excellent stability. Similar ORR results are also found for Pd-Sm2 O3 /C, Pd-Eu2 O3 /C, and Pd-CeO2 /C catalysts. Theoretical analyses reveal that the coupling between Pd and Gd2 O3 promotes electron transfer through the Pd-O-Gd bridge, which induces the antibonding-orbital occupancy of Pd-*OH for the optimization of *OH adsorption in the rate-determining step of ORR. The pH-dependent microkinetic modeling shows that Pd-Gd2 O3 is close to the theoretical optimal activity for ORR, outperforming Pt under the same conditions. By its ascendancy in ORR, the Pd-Gd2 O3 /C exhibits superior performance in Zn-air battery as an air cathode, implying its excellent practicability.

Co-Co Dinuclear Active Sites Dispersed on Zirconium-doped Heterostructured Co9 S8 /Co3 O4 for High-current-density and Durable Acidic Oxygen Evolution

Developing cost-effective and sustainable acidic water oxidation catalysts requires significant advances in material design and in-depth mechanism understanding for proton exchange membrane water electrolysis. Herein, we developed a single atom regulatory strategy to construct Co-Co dinuclear active sites (DASs) catalysts that atomically dispersed zirconium doped Co9 S8 /Co3 O4 heterostructure. The X-ray absorption fine structure elucidated the incorporation of Zr greatly facilitated the generation of Co-Co DASs layer with stretching of cobalt oxygen bond and S-Co-O heterogeneous grain boundaries interfaces, engineering attractive activity of significantly reduced overpotential of 75 mV at 10 mA cm-2 , a breakthrough of 500 mA cm-2 high current density, and water splitting stability of 500 hours in acid, making it one of the best-performing acid-stable OER non-noble metal materials. The optimized catalyst with interatomic Co-Co distance (ca. 2.80 Å) followed oxo-oxo coupling mechanism that involved obvious oxygen bridges on dinuclear Co sites (1,090 cm-1 ), confirmed by in situ SR-FTIR, XAFS and theoretical simulations. Furthermore, a major breakthrough of 120,000 mA g-1 high mass current density using the first reported noble metal-free cobalt anode catalyst of Co-Co DASs/ZCC in PEM-WE at 2.14 V was recorded.

Interface Engineering a High Content of Co3+ Sites on Co3O4 Nanoparticles to Boost Acidic Oxygen Evolution

Non-noble metal oxides have emerged as potential candidate electrocatalysts for acidic oxygen evolution reactions (OERs) due to their earth abundance; however, improving their catalytic activity and stability simultaneously in strong acidic electrolytes is still a major challenge. In this work, we report Co3O4@carbon core-shell nanoparticles on 2D graphite sheets (Co3O4@C-GS) as mixed-dimensional hybrid electrocatalysts for acidic OER. The obtained Co3O4@C-GS catalyst exhibits a low overpotential of 350 mV and maintains stability for 20 h at a current density of 10 mA cm-2 in H2SO4 (pH = 1) electrolyte. X-ray photoelectron and X-ray absorption spectroscopies illustrate that the higher content of Co3+ sites boosts acidic OER. Operando Raman spectroscopy reveals that the catalytic stability of Co3O4@C nanoparticles during the acidic OER is enhanced by the introduction of graphite sheets. This interface engineering of non-noble metal sites with high valence states provides an efficient approach to boost the catalytic activity and enhance the stability of noble-metal-free electrocatalysts for acidic OER.

Multi-metal electrocatalyst with crystalline/amorphous structure for enhanced alkaline water/seawater hydrogen evolution

The development of well-defined nanomaterials as non-noble metal electrocatalysts has broad application prospect for hydrogen generation technology. Recently, multi-metal electrocatalysts for hydrogen evolution reaction (HER) have attracted extensive attention due to their high catalytic performance arising from the synergistic effect of multi-metal interaction. However, most multi-metal catalysts suffer from the limited synergistic effect because of poor interfacial compatibility between different components. Here, a novel multi-metal catalyst (Ni/MoO2@CoFeOx) nanosheet with a crystalline/amorphous structure is demonstrated, which shows high HER activity. Ni/MoO2@CoFeOx exhibits an ultra-low overpotential of 18, 39, and 93 mV at 10 mA cm-2 in alkaline water, alkaline seawater and natural seawater, respectively, which outperformances most of the state-of-the-art non-noble metal compounds. In addition, the catalyst shows exceptional stability under 500 mA cm-2 in alkaline solution. In-situ Raman and other advanced structural characterization confirms the excellent catalytic activity is mainly contributed by: (1) the strong synergistic effect of multi-metal components provides multiple active sites in the catalytic process; (2) the crystalline/amorphous interface in Ni/MoO2@CoFeOx boosts the catalytically active sites and structure stability; (3) the crystalline phase enhances the intrinsic conductivity greatly; and (4) the amorphous phase provides abundant unsaturated sites for improved intrinsic catalytic activity. This work provides a feasible way to design electrocatalyst with high activity and stability for practical applications.

Modifying charge transfer between rhodium and ceria for boosted hydrogen oxidation reaction in alkaline electrolyte

Sluggish kinetics of hydrogen oxidation reaction (HOR) in alkaline solution has restricted the rapid development of hydrogen economy. Constructing catalyst with metal-oxide heterostructures can enhance HOR performance; however, little studies concentrate on charge transfer between them, and the corresponding effects on reactions remain unclear. Herein, we report charge-transfer-adjustable CeO2/Rh interfaces uniformly dispersed on multiwalled carbon nanotube (CNT), which exhibit excellent alkaline HOR performance. Results confirm that the charge transfer from Rh to CeO2 could be conveniently tuned via thermal treatment. Consequently, the adsorption free energies of H* in Rh sites and OH* adsorption strength in CeO2 could be adjusted, as corroborated by density functional theory study. The optimized CeO2/Rh interfaces exhibit an exchange current density and a mass-specific kinetic current of 0.53 mA cmPGM-2 and 830 A gPGM-1 at an overpotential of 50 mV, respectively, which surpasses most of the advanced noble-metal-based electrocatalysts. This work provides a new insight of harnessing charge transfer of heterostructure to enhance catalytic activities.

Ag-Co3 O4 -CoOOH-Nanowires Tandem Catalyst for Efficient Electrocatalytic Conversion of Nitrate to Ammonia at Low Overpotential via Triple Reactions

The electrocatalytic conversion of nitrate (NO3 ‾) to NH3  (NO3 RR) offers a promising alternative to the Haber-Bosch process. However, the overall kinetic rate of NO3 RR is plagued by the complex proton-assisted multiple-electron transfer process. Herein, Ag/Co3 O4 /CoOOH nanowires (i-Ag/Co3 O4  NWs) tandem catalyst is designed to optimize the kinetic rate of intermediate reaction for NO3 RR simultaneously. The authors proved that NO3 ‾ ions are reduced to NO2 ‾ preferentially on Ag phases and then NO2 ‾ to NO on Co3 O4  phases. The CoOOH phases catalyze NO reduction to NH3  via NH2 OH intermediate. This unique catalyst efficiently converts NO3 ‾ to NH3  through a triple reaction with a high Faradaic efficiency (FE) of 94.3% and a high NH3  yield rate of 253.7 μmol h-1  cm-2  in 1 M KOH and 0.1 M KNO3  solution at -0.25 V versus RHE. The kinetic studies demonstrate that converting NH2 OH into NH3  is the rate-determining step (RDS) with an energy barrier of 0.151 eV over i-Ag/Co3 O4  NWs. Further applying i-Ag/Co3 O4  NWs as the cathode material, a novel Zn-nitrate battery exhibits a power density of 2.56 mW cm-2  and an FE of 91.4% for NH3  production.

Switching the Oxygen Evolution Mechanism on Atomically Dispersed Ru for Enhanced Acidic Reaction Kinetics

Designing stable single-atom electrocatalysts with lower energy barriers is urgent for the acidic oxygen evolution reaction. In particular, the atomic catalysts are highly dependent on the kinetically sluggish acid-base mechanism, limiting the reaction paths of intermediates. Herein, we successfully manipulate the steric localization of Ru single atoms at the Co3O4 surface to improve acidic oxygen evolution by precise control of the anchor sites. The delicate structure design can switch the reaction mechanism from the lattice oxygen mechanism (LOM) to the optimized adsorbate evolution mechanism (AEM). In particular, Ru atoms embedded into cation vacancies reveal an optimized mechanism that activates the proton donor-acceptor function (PDAM), demonstrating a new single-atom catalytic pathway to circumvent the classic scaling relationship. Steric interactions with intermediates at the anchored Ru-O-Co interface played a primary role in optimizing the intermediates' conformation and reducing the energy barrier. As a comparison, Ru atoms confined to the surface sites exhibit a lattice oxygen mechanism for the oxygen evolution process. As a result, the delicate atom control of the spatial position presents a 100-fold increase in mass activity from 36.96 A gRu(ads)-1 to 4012.11 A gRu(anc)-1 at 1.50 V. These findings offer new insights into the precise control of single-atom catalytic behavior.

Ce4+/Ce3+ Redox Effect-Promoted CdS/CeO2 Heterojunction Photocatalyst for the Atom Economic Synthesis of Imines under Visible Light

The employment of stoichiometric alcohols and amines for imine synthesis under mild and green reaction conditions is still a challenge in the field. In this work, based on our research foundation in the thermocatalytic synthesis of imines over ceria, a CdS/CeO2 heterojunction photocatalyst was constructed and successfully realized the atom-economic synthesis of imines under visible light without additives at room temperature. Mechanistic experiments and corresponding characterizations indicated that the CdS/CeO2 heterojunction can improve the separation efficiency of photogenerated carriers, which can be further enhanced by the Ce4+/Ce3+ redox pair by rapidly combining photogenerated e-. The in situ-reduced Ce3+ can better activate O2 to form Ce-O-O·, which, together with h+, efficiently accelerates alcohol oxidation, which is the rate-determined step for the synthesis of imines via oxidative coupling reaction of alcohol and amine. In addition, our photocatalyst exhibited fairly decent reusability and substrate universality. This work solves problems of using base additives and excess amine or alcohol in the reported photocatalytic systems and provides new insight for designing CeO2-based photocatalytic oxidation catalysts.

Ir-Sn pair-site triggers key oxygen radical intermediate for efficient acidic water oxidation

The anode corrosion induced by the harsh acidic and oxidative environment greatly restricts the lifespan of catalysts. Here, we propose an antioxidation strategy to mitigate Ir dissolution by triggering strong electronic interaction via elaborately constructing a heterostructured Ir-Sn pair-site catalyst. The formation of Ir-Sn dual-site at the heterointerface and the resulting strong electronic interactions considerably reduce d-band holes of Ir species during both the synthesis and the oxygen evolution reaction processes and suppress their overoxidation, enabling the catalyst with substantially boosted corrosion resistance. Consequently, the optimized catalyst exhibits a high mass activity of 4.4 A mgIr-1 at an overpotential of 320 mV and outstanding long-term stability. A proton-exchange-membrane water electrolyzer using this catalyst delivers a current density of 2 A cm-2 at 1.711 V and low degradation in an accelerated aging test. Theoretical calculations unravel that the oxygen radicals induced by the π* interaction between Ir 5d-O 2p might be responsible for the boosted activity and durability.