Sustained CO2-photoreduction activity and high selectivity over Mn, C-codoped ZnO core-triple shell hollow spheres

Shaping and Doping Metal-Organic Framework-Derived TiO2 to Steer the Selectivity of Photocatalytic CO2 Reduction toward CH4

Steering selectivity in photocatalytic conversion of CO2, especially toward deep reduction products, is vital to energy and environmental goals yet remains a great challenge. In this work, we demonstrate a facet-dependent photocatalytic selective reduction of CO2 to CH4 in Cu-doped TiO2 catalysts exposed with different facets synthesized by a topological transformation from MIL-125 (Ti) precursors. The optimized round cake-like Cu/TiO2 photocatalyst mainly exposed with the (001) facet exhibited a high photocatalytic CO2 reduction performance with a CH4 yield of 40.36 μmol g-1 h-1 with a selectivity of 94.1%, which are significantly higher than those of TiO2 (001) (4.70 μmol g-1 h-1 and 52.6%, respectively), Cu/TiO2 (001 + 101) (18.95 μmol g-1 h-1 and 69.6%, respectively), and Cu/TiO2 (101) (14.73 μmol g-1 h-1 and 78.9%, respectively). The results of experimental and theoretical calculations demonstrate that the Cu doping dominating the promoted separation and migration efficiencies of photogenerated charges and the preferential adsorption on (001) facets synergistically contribute to the selective reduction of CO2 to CH4. This work highlights the significance of synergy between facet engineering and ion doping in the design of high-performance photocatalysts with respect to selective reduction of CO2 to multielectron products.

Synergistic effect of interstitial phosphorus doping and MoS2 modification over Zn0.3Cd0.7S for efficient photocatalytic H2 production

ZnxCd1-xS photocatalysts have been widely investigated due to their diverse morphologies, suitable band gaps/band edge positions, and high electronic mobility. However, the sluggish charge separation and severe charge recombination impede the application of ZnxCd1-xS for hydrogen evolution reaction (HER). Herein, doping of phosphorus (P) atoms into Zn0.3Cd0.7S has been implemented to elevate S vacancies concentration as well as tune its Fermi level to be located near the impurity level of S vacancies, prolonging the lifetime of photogenerated electrons. Moreover, P doping induces a hybridized state in the bandgap, leading to an imbalanced charge distribution and a localized built-in electric field for effective separation of photogenerated charge carriers. Further construction of intimate heterojunctions between P-Zn0.3Cd0.7S and MoS2 accelerates surface redox reaction. Benefiting from the above merits, 1 % MoS2/P-Zn0.3Cd0.7S exhibits a high hydrogen production rate of 30.65 mmol·g-1·h-1 with AQE of 22.22 % under monochromatic light at 370 nm, exceeding most ZnxCd1-xS based photocatalysts reported so far. This work opens avenues to fabricate examplary photocatalysts for solar energy conversion and beyond.

Engineering Built-In Electric Field Microenvironment of CQDs/g-C3N4 Heterojunction for Efficient Photocatalytic CO2 Reduction

Graphitic carbon nitride (CN), as a nonmetallic photocatalyst, has gained considerable attention for its cost-effectiveness and environmentally friendly nature in catalyzing solar-driven CO2 conversion into valuable products. However, the photocatalytic efficiency of CO2 reduction with CN remains low, accompanied by challenges in achieving desirable product selectivity. To address these limitations, a two-step hydrothermal-calcination tandem synthesis strategy is presented, introducing carbon quantum dots (CQDs) into CN and forming ultra-thin CQD/CN nanosheets. The integration of CQDs induces a distinct work function with CN, creating a robust interface electric field after the combination. This electric field facilitates the accumulation of photoelectrons in the CQDs region, providing an abundant source of reduced electrons for the photocatalytic process. Remarkably, the CQD/CN nanosheets exhibit an average CO yield of 120 µmol g-1, showcasing an outstanding CO selectivity of 92.8%. The discovery in the work not only presents an innovative pathway for the development of high-performance photocatalysts grounded in non-metallic CN materials employing CQDs but also opens new avenues for versatile application prospects in environmental protection and sustainable cleaning energy.

d-band center engineering of single Cu atom and atomic Ni clusters for enhancing electrochemical CO2 reduction to CO

The rational design of catalysts with atomic dispersion and a deep understanding of the catalytic mechanism is crucial for achieving high performance in CO2 reduction reaction (CO2RR). Herein, we present an atomically dispersed electrocatalyst with single Cu atom and atomic Ni clusters supported on N-doped mesoporous hollow carbon sphere (CuSANiAC/NMHCS) for highly efficient CO2RR. CuSANiAC/NMHCS demonstrates a remarkable CO Faradaic efficiency (FECO) exceeding 90% across a potential range of -0.6 to -1.2 V vs. reversible hydrogen electrode (RHE) and achieves its peak FECO of 98% at -0.9 V vs. RHE. Theoretical studies reveal that the electron redistribution and modulated electronic structure-notably the positive shift in d-band center of Ni 3d orbital-resulting from the combination of single Cu atom and atomic Ni clusters markedly enhance the CO2 adsorption, facilitate the formation of *COOH intermediate, and thus promote the CO production activity. This study offers fresh perspectives on fabricating atomically dispersed catalysts with superior CO2RR performance.

Isolated Ni Atoms Enable Near-Unity CH4 Selectivity for Photothermal CO2 Hydrogenation

Photothermal hydrogenation of carbon dioxide (CO2) into value-added products is an ideal solution for addressing the energy crisis and mitigating CO2 emissions. However, achieving high product selectivity remains challenging due to the simultaneous occurrence of numerous competing intermediate reactions during CO2 hydrogenation. We present a novel approach featuring isolated single-atom nickel (Ni) anchored onto indium oxide (In2O3) nanocrystals, serving as an effective photothermal catalyst for CO2 hydrogenation into methane (CH4) with a remarkable near-unity (∼99%) selectivity. Experiments and theoretical simulations have confirmed that isolated Ni sites on the In2O3 surface can effectively stabilize the intermediate products of the CO2 hydrogenation reaction and reduce the transition state energy barrier, thereby changing the reaction path to achieve ultrahigh selective methanation. This study provides comprehensive insights into the design of single-atom catalysts for the highly selective photothermal catalytic hydrogenation of CO2 to methane.

Ultrafast electron transfer at the In2O3/Nb2O5 S-scheme interface for CO2 photoreduction

Constructing S-scheme heterojunctions proves proficient in achieving the spatial separation of potent photogenerated charge carriers for their participation in photoreactions. Nonetheless, the restricted contact areas between two phases within S-scheme heterostructures lead to inefficient interfacial charge transport, resulting in low photocatalytic efficiency from a kinetic perspective. Here, In2O3/Nb2O5 S-scheme heterojunctions are fabricated through a straightforward one-step electrospinning technique, enabling intimate contact between the two phases and thereby fostering ultrafast interfacial electron transfer (<10 ps), as analyzed via femtosecond transient absorption spectroscopy. As a result, powerful photo-electrons and holes accumulate in the Nb2O5 conduction band and In2O3 valence band, respectively, exhibiting extended long lifetimes and facilitating their involvement in subsequent photoreactions. Combined with the efficient chemisorption and activation of stable CO2 on the Nb2O5, the resulting In2O3/Nb2O5 hybrid nanofibers demonstrate improved photocatalytic performance for CO2 conversion.

Gas-Solid Phase Reaction Derived Silver Bismuth Iodide Rudorffite: Structural Insight and Exploring Photocatalytic Potential of CO2 Reduction

Photocatalytic reduction of CO2 is a promising strategy to mitigate the effects of global warming by converting CO2 into valuable energy-dense products. Silver bismuth iodide (SBI) is an attractive material owing to its tunable bandgap and favorable band-edge positions for efficient CO2 photoreduction. In this study, SBI materials, including AgBi2I7, AgBiI4, Ag2BiI5, and Ag3BiI6 are first synthesized, through gas-solid reaction by controlling the stoichiometric ratio of reactants. The X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) results revealed that the distance between Ag-I is proportional to the degree of Ag ions delocalization, which occupies the vacant sites. That greatly retards the charge recombination at vacant sites. In addition, the surface potential via photo-assisted Kelvin probe force measurements of various SBI catalysts shows that Ag3BiI6 exhibits the highest surface potential change due to the rich delocalized Ag ions. This results in effective charge carrier transport and prevention of charge recombination at vacant sites. Taking the above advantages, the averaged CO and CH4 production rates for Ag3BiI6 achieved 0.23 and 0.10 µmol g-1 h-1, respectively. The findings suggest that Ag3BiI6 has a high potential as a novel photocatalyst for CO2 reduction and sheds light on the possibility of solving environmental contamination and sustainable energy crises.

Advances in Defect Engineering of Metal Oxides for Photocatalytic CO2 Reduction

Photocatalytic CO2 reduction technology, capable of converting low-density solar energy into high-density chemical energy, stands as a promising approach to alleviate the energy crisis and achieve carbon neutrality. Semiconductor metal oxides, characterized by their abundant reserves, good stability, and easily tunable structures, have found extensive applications in the field of photocatalysis. However, the wide bandgap inherent in metal oxides contributes to their poor efficiency in photocatalytic CO2 reduction. Defect engineering presents an effective strategy to address these challenges. This paper reviews the research progress in defect engineering to enhance the photocatalytic CO2 reduction performance of metal oxides, summarizing defect classifications, preparation methods, and characterization techniques. The focus is on defect engineering, represented by vacancies and doping, for improving the performance of metal oxide photocatalysts. This includes advancements in expanding the photoresponse range, enhancing photogenerated charge separation, and promoting CO2 molecule activation. Finally, the paper provides a summary of the current issues and challenges faced by defect engineering, along with a prospective outlook on the future development of photocatalytic CO2 reduction technology.

Enhanced carbon dioxide adsorption and carrier separation over amine functionalized zirconium metal organic framework/gold/indium oxide for boosting photocatalytic carbon dioxide reduction

Photocatalytic CO2 conversion is a prospective way to mitigate greenhouse effect. In2O3 is widely used in the resource conversion of CO2, but still exists a few drawbacks containing limited CO2 capture and activation, narrow light absorption range, low charge separation and utilization. To overcome these disadvantages, an NH2-UiO-66/Au/In2O3 composite photocatalyst is built, with Au nanoparticles and NH2-UiO-66 decorated on the surface of In2O3 nanorods. Significantly, the improved carrier separation ability is attributed to the Schottky junction at the Au/In2O3 interface and the heterostructure between In2O3 and NH2-UiO-66. And the widened light absorption is attributed to the plasmon effect caused by Au nanoparticles. Moreover, the increase of CO2 adsorption and activation is mainly due to the porosity of NH2-UiO-66, thereby greatly improving photocatalytic CO2RR efficiency of NH2-UiO-66/Au/In2O3 nanorods. The CO yield of NH2-UiO-66/Au/In2O3 is 8.56 μmol g-1 h-1, which is nearly 45 times that of In2O3. This work will present a novel idea to design high-efficient composite photocatalysts for CO2 reduction by multifunctional component synergistic enhancement.

Enhanced Solar Fuel Production over In2 O3 @Co2 VO4 Hierarchical Nanofibers with S-Scheme Charge Separation Mechanism

The conversion of CO2 into valuable solar fuels via photocatalysis is a promising strategy for addressing energy shortages and environmental crises. Here, novel In2 O3 @Co2 VO4 hierarchical heterostructures are fabricated by in situ growing Co2 VO4 nanorods onto In2 O3 nanofibers. First-principle calculations and X-ray photoelectron spectroscopy (XPS) measurements reveal the electron transfer between In2 O3 and Co2 VO4 driven by the difference in work functions, thus creating an interfacial electric field and bending the bands at the interfaces. In this case, the photogenerated electrons in In2 O3 transport to Co2 VO4 and recombine with its holes, indicating the formation of In2 O3 @Co2 VO4 S-scheme heterojunctions and resulting in effective separation of charge carriers, as confirmed by in situ irradiation XPS. The unique S-scheme mechanism, along with the enhanced optical absorption and the lower Gibbs free energy change for the production of * CHO, significantly contributes to the efficient CO2 photoreduction into CO and CH4 in the absence of any molecule cocatalyst or scavenger. Density functional theory simulation and in situ diffuse reflectance infrared Fourier transform spectroscopy are employed to elucidate the reaction mechanism in detail.

Carbon-Based Electron Buffer Layer on ZnOx -Fe5 C2 -Fe3 O4 Boosts Ethanol Synthesis from CO2 Hydrogenation

The conversion of CO2 into ethanol with renewable H2 has attracted tremendous attention due to its integrated functions of carbon elimination and chemical synthesis, but remains challenging. The electronic properties of a catalyst are essential to determine the adsorption strength and configuration of the key intermediates, therefore altering the reaction network for targeted synthesis. Herein, we describe a catalytic system in which a carbon buffer layer is employed to tailor the electronic properties of the ternary ZnOx -Fe5 C2 -Fe3 O4 , in which the electron-transfer pathway (ZnOx →Fe species or carbon layer) ensures the appropriate adsorption strength of -CO* on the catalytic interface, facilitating C-C coupling between -CHx * and -CO* for ethanol synthesis. Benefiting from this unique electron-transfer buffering effect, an extremely high ethanol yield of 366.6 gEtOH  kgcat -1  h-1 (with CO of 10 vol % co-feeding) is achieved from CO2 hydrogenation. This work provides a powerful electronic modulation strategy for catalyst design in terms of highly oriented synthesis.

WS2 supported PtOx clusters for efficient photocatalytic CO2 reduction: a DFT study

Platinum (Pt) nanoparticles/nanoclusters are some of the most efficient cocatalysts for photocatalytic CO2 reduction. Nevertheless, the produced CO can lead to a poisoning effect due to the strong adsorption strength of the Pt cocatalysts. Using density functional theory, PtOx clusters with variable sizes (Pt4O6, Pt5O8, Pt7O10, and Pt8O13) are selected to load on WS2 (PtOx-WS2) for photocatalytic CO2 conversion. The calculated results demonstrate that PtOx-WS2 are highly stable, and the electron-rich PtOx clusters are beneficial for the photocatalytic CO2 reduction. All the PtOx-WS2 catalysts exhibit efficient photocatalytic performance for CO2 reduction. Especially, Pt4O6-, Pt5O8-, and Pt8O13-WS2 have acceptable or ultra-low ΔGmax (ΔG for the rate-determining step) of 0.57, 0.23, and 0.48 eV to produce CH3OH, HCOOH, and CH4, respectively. The photocatalytic activities of PtOx-WS2 are correlated with the adsorption strength of the key intermediates, and the strong interactions between PtOx-WS2 and *COOH or *HCOO can lower the free energy changes for the first hydrogenation step. More importantly, PtOx-WS2 can also weaken the adsorption strength of *CO and *HCOOH, which are conducive to forming *CHO. This work gives an in-depth insight to design novel catalysts and promote their catalytic activity for photocatalytic CO2 reduction.

Organic Polymer Dots Photocatalyze CO2 Reduction in Aqueous Solution

Developing low-cost and efficient photocatalysts to convert CO2 into valuable fuels is desirable to realize a carbon-neutral society. In this work, we report that polymer dots (Pdots) of poly[(9,9'-dioctylfluorenyl-2,7-diyl)-co-(1,4-benzo-thiadiazole)] (PFBT), without adding any extra co-catalyst, can photocatalyze reduction of CO2 into CO in aqueous solution, rendering a CO production rate of 57 μmol g-1  h-1 with a detectable selectivity of up to 100 %. After 5 cycles of CO2 re-purging experiments, no distinct decline in CO amount and reaction rate was observed, indicating the promising photocatalytic stability of PFBT Pdots in the photocatalytic CO2 reduction reaction. A mechanistic study reveals that photoexcited PFBT Pdots are reduced by sacrificial donor first, then the reduced PFBT Pdots can bind CO2 and reduce it into CO via their intrinsic active sites. This work highlights the application of organic Pdots for CO2 reduction in aqueous solution, which therefore provides a strategy to develop highly efficient and environmentally friendly nanoparticulate photocatalysts for CO2 reduction.

Highly Enhancing CO2 Photoreduction by Metallization of an Imidazole-linked Robust Covalent Organic Framework

Converting CO2 into value-added chemicals to solve the issues caused by carbon emission is promising but challenging. Herein, by embedding metal ions (Co2+ , Ni2+ , Cu2+ , and Zn2+ ) into an imidazole-linked robust photosensitive covalent organic framework (PyPor-COF), effective photocatalysts for CO2 conversion are rationally designed and constructed. Characterizations display that all of the metallized PyPor-COFs (M-PyPor-COFs) display remarkably high enhancement in their photochemical properties. Photocatalysis reactions reveal that the Co-metallized PyPor-COF (Co-PyPor-COF) achieves a CO production rate as high as up to 9645 µmol g-1 h-1 with a selectivity of 96.7% under light irradiation, which is more than 45 times higher than that of the metal-free PyPor-COF, while Ni-metallized PyPor-COF (Ni-PyPor-COF) can further tandem catalyze the generated CO to CH4 with a production rate of 463.2 µmol g-1 h-1 . Experimental analyses and theory calculations reveal that their remarkable performance enhancement on CO2 photoreduction should be attributed to the incorporated metal sites in the COF skeleton, which promotes the adsorption and activation of CO2 and the desorption of generated CO and even reduces the reaction energy barrier for the formation of different intermediates. This work demonstrates that by metallizing photoactive COFs, effective photocatalysts for CO2 conversion can be achieved.

Pulsed-Laser-Triggered Piezoelectric Photocatalytic CO2 Reduction over Tetragonal BaTiO3 Nanocubes

The recombination of photoinduced carriers in photocatalysts is considered one of the biggest barriers to the increase of photocatalytic efficiency. Piezoelectric photocatalysts open a new route to realize rapid carrier separation by mechanically distorting the lattice of piezoelectric nanocrystals to form a piezoelectric potential within the nanocrystals, generally requiring external force (e.g., ultrasonic radiation, mechanical stirring, and ball milling). In this study, a low-power UV pulsed laser (PL) (3 W, 355 nm) as a UV light source can trigger piezoelectric photocatalytic CO2 reduction of tetragonal BaTiO3 (BTO-T) in the absence of an applied force. The tremendous transient light pressure (5.7 × 107  Pa, 2.7 W) of 355 nm PL not only bends the energy band of BTO-T, thus allowing reactions that cannot theoretically occur to take place, but also induces a pulsed built-in electric field to determine an efficient photoinduced carrier separation. On that basis, the PL-triggered piezoelectric photocatalytic CO2 reduction realizes the highest reported performance, reaching a millimole level CO yield of 52.9 mmol g-1 h-1 and achieving efficient photocatalytic CO2 reduction in the continuous catalytic system. The method in this study is promising to contribute to the design of efficient piezoelectric photocatalytic reactions.

Amide Covalent Bonding Engineering in Heterojunction for Efficient Solar-Driven CO2 Reduction

Inefficient charge separation and slow interfacial reaction dynamics significantly hamper the efficiency of photocatalytic CO2 reduction. Herein, a facile EDC/NHS-assisted linking strategy was developed to enhance charge separation in heterojunction photocatalysts. Using this approach, we successfully synthesized amide-bonded carbon quantum dot-g-C3N4 (CQD-CN) heterojunction photocatalysts. The formation of amide covalent bonds between CN and CQDs in the CN-CQD facilitates efficient carrier migration, CO2 adsorption, and activation. Exploiting these advantages, the CN-CQD photocatalysts exhibit high selectivity with CO and CH4 evolution rates of 79.2 and 2.7 μmol g-1 h-1, respectively. These rates are about 1.7 and 3.6 times higher than those of CN@CQD and bulk CN, respectively. Importantly, the CN-CQD photocatalysts demonstrate exceptional stability, even after 12 h of continuous testing. The presence of the COOH* signal is identified as a crucial intermediate species in the conversion of CO2 to CO. This study presents a covalent bonding engineering strategy for developing high-performance heterojunction photocatalysts for efficient solar-driven reduction of CO2.

Engineering the Metal/Dielectric Interface to Unlock the Potential of Scattered Light for Boosted Photoredox Catalysis

The recycling of scattered light by metals has been emerging as a promising light-manipulation-capture strategy, but how to bring its potential into better play remains to be explored. Herein, we present that constructing dual metal/high-refractive-index dielectric interfaces within the SiO2 core@TiO2 shell-Pd satellite@TiO2 shell effectively strengthens both the scattering efficiency of the dielectric SiO2 support and electric field confinement. Consequently, the absorption of Pd toward near-field scattered light and the interfacial charge carrier separation are both enhanced. The synergy of these effects leads to boosted photoactivity toward the aerobic oxidation of cyclohexanol to cyclohexanone and the anaerobic reduction of proton for hydrogen evolution under visible-light irradiation as compared to the counterparts with a single metal/dielectric interface and dual metal/dielectric interfaces consisting of low-refractive-index dielectric component. Notably, the similar enhancements in both optical absorption and photoactivity can be achieved through the present dual metal/high-refractive-index dielectric interfaces engineering strategy for other metals, such as Pt nanoparticles. This work presents an instructive avenue to upgrade the optical response of metals and thus the photocatalytic performance by engineering metal/dielectric interfaces.

Lattice Distortion in a Confined Structured ZnS/ZnO Heterojunction for Efficient Photocatalytic CO2 Reduction

It is a promising strategy to effectively promote "carbon neutrality" by reducing CO₂ to small energy molecules through photocatalysis technology. However, due to low light utilization and recombination of photogenerated carriers, photocatalysts usually have low activity and low selectivity for products. Herein, a hollow spherical ZnS/ZnO heterojunction with a spatial confinement effect photocatalyst was synthesized toward CO₂ photoreduction through preciously controlling the nano-/microstructure. The local lattice distortions were introduced into the surface of the hollow ZnS/ZnO microsphere, which activated lattice oxygen and provided additional active reaction sites. Furthermore, the heterojunction constructed between ZnS and ZnO interfaces facilitated the separation of photoinduced charge carriers. Combined with the natural advantage of enhanced light capture and absorption for a hollow confined structure, as a result, the systemic design in the electronic and confined structures for the photocatalyst has brought an excellent CO₂ reduction performance with a CO yield rate as high as 35.85 μmol g^-1h^-1 and durability under a 300 W Xe lamp irradiation without any sacrificial agent and cocatalyst.

Hydrophilic ZnO/C nanocomposites with superior adsorption, photocatalytic, and photo-enhanced antibacterial properties for synergistic water purification

Owing to the numerous potential applications of ZnO nanomaterials, the development of ZnO-based nanocomposites has become of great scientific interest in various fields. In this paper, we are reporting the fabrication of a series of ZnO/C nanocomposites through a simple "one-pot" calcination method under three different temperatures, 500 ℃, 600 ℃, and 700 ℃, with samples labeled as ZnO/C-500, -600, and -700, respectively. All samples exhibited adsorption capabilities and photon-activated catalytic and antibacterial properties, with the ZnO/C-700 sample showing superior performance among the three. The carbonaceous material in ZnO/C is key to expanding the optical absorption range and improving the charge separation efficiency of ZnO. The remarkable adsorption property of the ZnO/C-700 sample was demonstrated using Congo red dye, and is credited to its good hydrophilicity. It was also found to exhibit the most notable photocatalysis effect due to its high charge transfer efficiency. The hydrophilic ZnO/C-700 sample was also examined for antibacterial effects both in vitro (against Escherichia coli and Staphylococcus aureus) and in vivo (against MSRA-infected rat wound model), and it was observed to exhibit synergistic killing performance under visible-light irradiation. A possible cleaning mechanism is proposed on the basis of our experimental results. Overall, this work presents a facile way of synthesizing ZnO/C nanocomposites with outstanding adsorption, photocatalysis, and antibacterial properties for the efficient treatment of organic and bacterial contaminants in wastewater.

Epitaxially grown silicon-based single-atom catalyst for visible-light-driven syngas production

Improving the dispersion of active sites simultaneous with the efficient harvest of photons is a key priority for photocatalysis. Crystalline silicon is abundant on Earth and has a suitable bandgap. However, silicon-based photocatalysts combined with metal elements has proved challenging due to silicon's rigid crystal structure and high formation energy. Here we report a solid-state chemistry that produces crystalline silicon with well-dispersed Co atoms. Isolated Co sites in silicon are obtained through the in-situ formation of CoSi₂ intermediate nanodomains that function as seeds, leading to the production of Co-incorporating silicon nanocrystals at the CoSi₂/Si epitaxial interface. As a result, cobalt-on-silicon single-atom catalysts achieve an external quantum efficiency of 10% for CO₂-to-syngas conversion, with CO and H₂ yields of 4.7 mol g_(Co)^-1 and 4.4 mol g_(Co)^-1, respectively. Moreover, the H₂/CO ratio is tunable between 0.8 and 2. This photocatalyst also achieves a corresponding turnover number of 2 × 10⁴ for visible-light-driven CO₂ reduction over 6 h, which is over ten times higher than previously reported single-atom photocatalysts.

Influences of Partial Destruction of Ti-MOFs on Photo(electro)catalytic H2 Evolution by Dominating Role of Charge Carrier Trapping over Surface Area

The design of water-stable photo and electrocatalysts of metal-organic frameworks (MOFs) for its promising catalytic applications at long-term irradiations or persisted current loads is extremely necessary but still remains as challenging. A limited number of reports on Ti-MOF-based catalysts for water splitting are only available to explain and understand the correlation between the nature of materials and MOFs array. Herein, spherical Ti-MOFs and corresponding partially annealed hollow core-shell Ti-MOFs (Ti-MOF/D) are designed and the correlation with their photo(electro)catalytic water splitting performance is evaluated. The switchable valence state of Ti for the Ti-MOF as a function of molecular bonding is the possible reason behind the observed photocatalytic hydrogen generation and light-harvesting ability of the system. Besides, the defect state, solid core-shell mesoporous structure, and active sites of Ti-MOF help to trap the charge carriers and the reduction of the recombination process. This phenomenon is absent for hollow core-shells Ti-MOF/D spheres due to the rigid TiO₂ outer surface although there is a contradiction in surface area with Ti-MOF. Considering the diversity of Ti-MOF and Ti-MOF/D, further novel research can be designed using this way to manipulate their properties as per the requirements.

The interface design and properties enhancement of ZnO/cellulose composites: Branching fiber network to guide the assembly of ZnO flower

Using renewable biomass resources to regulate the growth and properties of catalysts is sustainable nanotechnology for achieving efficient photocatalysis and recycling. This work suggested a way to produce paper-based photocatalysts and resize the embedded zinc oxide (ZnO) flowers. The combination of experimental analysis and theoretical simulations demonstrated that small pores of the branching fiber network enhanced the interfacial interaction between ZnO flowers and cellulose fibers, thereby improving mechanical properties and optimizing flower structure. The interaction energy and electron density difference (EDD) simulation results demonstrated that the ZnO/cellulose interface structure shares significant attraction and charge transfer. Cellulose fibers ground for 20 cycles (CFG20) possessed dense branching fiber network and loaded with the smallest ZnO flowers, achieving a balance of strong mechanical properties and reaction efficiency. Remarkably, ZnO/CFG20 paper-based catalyst indicated strong photodegradation efficiency (100% for methyl orange, 100% for phenol, and 85.23% for aniline) and excellent reusability. This work will pave the way for the green regulation of catalysts.

Single-site bipyridine cobalt complexes covalently embedded into graphitic carbon nitride with excellent photocatalytic activity and selectivity towards CO2 reduction

A combination of a semiconductor-based photosensitizer with molecular catalysts via covalent bonds is an effective way to utilize solar energy to reduce CO₂ into value-added chemicals with high efficiency and selectivity. In this study, 2,2'-bpy-5,5'-dialdehyde functioned as organic ligands and were embedded into the skeleton of g-CN through imine bonds via thermal copolymerization. The introduction of 2,2'-bpy can not only chelate with earth-abundant Co as single-site catalytic centers but also can optimize the properties of original g-CN such as the enlarged specific surface area and extended visible light absorption range. The CO evolution rate of g-CN-bpy-Co can reach up to 106.3 μmol g^-1 h^-1 with a selectivity of 97% over proton reduction, which was 82-fold than that of g-CN-Co. The different coordination environments and valence states of cobalt were also studied simultaneously and the results showed that Co(II) exhibited superior catalytic activity towards Co(III). Control experiments demonstrated that the covalent linkage between g-CN and Co-2,2'-bpy plays a vital role in photocatalytic activity and selectivity. Besides, the CO generation rate demonstrated linear growth upon visible light irradiation up to 72 h and preferable recyclability. This research provides a new facile way to fabricate low-priced photocatalysts with high activity and selectivity and bridge homogeneous and heterogeneous catalysis.

Recent Advances and Perspectives of Core-Shell Nanostructured Materials for Photocatalytic CO2 Reduction

Photocatalytic CO₂ conversion into solar fuels is a promising technology to alleviate CO₂ emissions and energy crises. The development of core-shell structured photocatalysts brings many benefits to the photocatalytic CO₂ reduction process, such as high conversion efficiency, sufficient product selectivity, and endurable catalyst stability. Core-shell nanostructured materials with excellent physicochemical features take an irreplaceable position in the field of photocatalytic CO₂ reduction. In this review, the recent development of core-shell materials applied for photocatalytic reduction of CO_{2 is introduced} . First, the basic principle of photocatalytic CO₂ reduction is introduced. In detail, the classification and synthesis techniques of core-shell catalysts are discussed. Furthermore, it is also emphasized that the excellent properties of the core-shell structure can greatly improve the activity, selectivity, and stability in the process of photocatalytic CO₂ reduction. Hopefully, this paper can provide a favorable reference for the preparation of efficient photocatalysts for CO₂ reduction.

Femtosecond transient absorption spectroscopy investigation into the electron transfer mechanism in photocatalysis

Femtosecond transient absorption spectroscopy (fs-TAS) is a powerful technique for monitoring the electron transfer kinetics in photocatalysis. Several important works have successfully elucidated the electron transfer mechanism in heterojunction photocatalysts (HPs) using fs-TAS measurements, and thus a timely summary of recent advances is essential. This feature article starts with a thorough interpretation of the operating principle of fs-TAS equipment, and the fundamentals of the fs-TAS spectra. Subsequently, the applications of fs-TAS in analyzing the dynamics of photogenerated carriers in semiconductor/metal HPs, semiconductor/carbon HPs, semiconductor/semiconductor HPs, and multicomponent HPs are discussed in sequence. Finally, the significance of fs-TAS in revealing the ultrafast interfacial electron transfer process in HPs is summarized, and further research on the applications of fs-TAS in photocatalysis is proposed. This feature article will provide deep insight into the mechanism of the enhanced photocatalytic performance of HPs from the perspective of electron transfer kinetics.

Optical control of neuronal activities with photoswitchable nanovesicles

Precise modulation of neuronal activity by neuroactive molecules is essential for understanding brain circuits and behavior. However, tools for highly controllable molecular release are lacking. Here, we developed a photoswitchable nanovesicle with azobenzene-containing phosphatidylcholine (azo-PC), coined 'azosome', for neuromodulation. Irradiation with 365 nm light triggers the trans-to-cis isomerization of azo-PC, resulting in a disordered lipid bilayer with decreased thickness and cargo release. Irradiation with 455 nm light induces reverse isomerization and switches the release off. Real-time fluorescence imaging shows controllable and repeatable cargo release within seconds (< 3 s). Importantly, we demonstrate that SKF-81297, a dopamine D1-receptor agonist, can be repeatedly released from the azosome to activate cultures of primary striatal neurons. Azosome shows promise for precise optical control over the molecular release and can be a valuable tool for molecular neuroscience studies.

Advanced nanomaterials for highly efficient CO2 photoreduction and photocatalytic hydrogen evolution

At present, CO₂ photoreduction to value-added chemicals/fuels and photocatalytic hydrogen generation by water splitting are the most promising reactions to fix two main issues simultaneously, rising CO₂ levels and never-lasting energy demand. CO₂, a major contributor to greenhouse gases (GHGs) with about 65% of the total emission, is known to cause adverse effects like global temperature change, ocean acidification, greenhouse effects, etc. The idea of CO₂ capture and its conversion to hydrocarbons can control the further rise of CO₂ levels and help in producing alternative fuels that have several further applications. On the other hand, hydrogen being a zero-emission fuel is considered as a clean and sustainable form of energy that holds great promise for various industrial applications. The current review focuses on the discussion of the recent progress made in designing efficient photocatalytic materials for CO₂ photoreduction and hydrogen evolution reaction (HER). The scope of the current study is limited to the TiO₂ and non-TiO₂ based advanced nanomaterials (i.e. metal chalcogenides, MOFs, carbon nitrides, single-atom catalysts, and low-dimensional nanomaterials). In detail, the influence of important factors that affect the performance of these photocatalysts towards CO₂ photoreduction and HER is reviewed. Special attention is also given in this review to provide a brief account of CO₂ adsorption modes on the catalyst surface and its subsequent reduction pathways/product selectivity. Finally, the review is concluded with additional outlooks regarding upcoming research on promising nanomaterials and reactor design strategies for increasing the efficiency of the photoreactions.

Mn2+ doped AgInS2 photocatalyst for formaldehyde degradation and hydrogen production from water splitting by carbon tube enhancement

In this work, AgInS₂ and Mn²⁺ doped AgInS₂ (Mn-AgInS₂) with different Mn²⁺: (Ag⁺ + In³⁺) ratios were synthesized via a low temperature liquid method. The photocatalytic activity of the obtained samples was followed by taking formaldehyde as the target pollutant under visible light irradiation. The photocatalysts were passed through various characterization procedures to investigate their morphological, structural and photophysical characteristics. The optimal proportion sample [with the ratio n (Mn²⁺): n (Ag⁺ + In³⁺) = 1:100] photodegraded about 79% formaldehyde in 150 min. These upgraded activities are attributed to the enhanced visible light absorption and superior charge separation due to the presence of Mn²⁺ as confirmed site from charge separation measurements. In addition, a possible mechanism for the photodegradation of formaldehyde is proposed based on the experimental results. Furthermore, the photocatalytic water splitting performance of Mn-AgInS₂ and multi-walled carbon nanotubes (MWCNTs) modified Mn-AgInS₂ is investigated and compared under simulated sunlight irradiation, and remarkable hydrogen production is achieved (105 μmol h^-1 g^-1) by using the latter.

Implanting CoOx Clusters on Ordered Macroporous ZnO Nanoreactors for Efficient CO2 Photoreduction

Despite suffering from slow charge-carrier mobility, photocatalysis is still an attractive and promising technology toward producing green fuels from solar energy. An effective approach is to design and fabricate advanced architectural materials as photocatalysts to enhance the performance of semiconductor-based photocatalytic systems. Herein, metal-organic-framework-derived hierarchically ordered porous nitrogen and carbon co-doped ZnO (N-C-ZnO) structures are developed as nanoreactors with decorated CoO_x nanoclusters for CO₂ -to-CO conversion driven by visible light. Introduction of hierarchical nanoarchitectures with highly ordered interconnected meso-macroporous channels shows beneficial properties for photocatalytic reduction reactions, including enhanced mobility of charge carriers throughout the highly accessible framework, maximized exposure of active sites, and inhibited recombination of photoinduced charge carriers. Density functional theory calculations further reveal the key role of CoO_x nanoclusters with high affinity to CO₂ molecules, and the CoO bonds formed on the surface of the composite exhibit stronger charge redistribution. As a result, the obtained CoO_x /N-C-ZnO demonstrates enhanced photocatalysis performance in terms of high CO yield and long-term stability.

In Situ Irradiated X-ray Photoelectron Spectroscopy Investigation on Electron Transfer Mechanism in S-Scheme Photocatalyst

S-scheme photocatalysts have demonstrated great potential in solar fuel production. To study the electron transfer pathways in S-scheme heterojunctions, in situ irradiated X-ray photoelectron spectroscopy (ISIXPS) is an effective and widely used technology. However, the mechanism of ISIXPS in identifying the electron transfer pathways in S-scheme heterojunction has not yet been elucidated. In this Perspective, the development process and the formation mechanism of S-scheme photocatalysts are first introduced. Afterward, the principles of XPS and ISIXPS measurements are thoroughly explained, and the applications of XPS and ISIXPS in confirming the interfacial electron transfer in S-scheme heterojunctions are discussed. Finally, suggestions for future research on the utilization of ISIXPS in S-scheme heterojunctions are proposed. This Perspective will provide deep insight into the electron transfer mechanism in S-scheme photocatalysts through ISIXPS.

Promoting the reduction of CO2 to formate and formaldehyde via gas-liquid interface dielectric barrier discharge using a Zn0.5Cd0.5S/CoP/multiwalled carbon nanotubes catalyst

A Zn_0.5Cd_0.5S (ZCS) solid solution was prepared using a hydrothermal method, in which CoP nanowires were added as a co-catalyst and co-deposited with multiwalled carbon nanotubes (MWNTs) on sponge to prepare a series of ZCS/CoP/MWNTs/sponge electrodes. The microstructures of catalysts were analyzed to confirm ZCS and CoP were successfully loaded in MWNTs/sponge. The CO₂ reduction products (formate and formaldehyde) produced via dielectric barrier discharge (DBD) using the different catalysts proved that the introduction of the CoP nanowires co-catalyst can enhance the catalytic activity of ZCS/MWNTs/sponge in the DBD system. Using 10% CoP and a ZCS/CoP concentration of 2.5 g·L^-1, the resulting ZCS/CoP/MWNTs/sponge catalyst exhibited the best catalytic of CO₂ reduction ability toward formate (7894.6 μmol·L^-1) and formaldehyde (308.5 μmol·L^-1) after 60 min of discharge, respectively. The proposed DBD catalytic mechanism for the reduction of CO₂ was analyzed according to the Tafel slope, density functional theory calculations, photocurrent density and plasma reaction process. Furthermore, the application of the DBD catalytic technology for CO₂ capture and reduction was shown to be efficient in a seawater system, and as such, it could be useful for marine CO₂ storage and conversion.

Alkyl group-decorated g-C3N4 for enhanced gas-phase CO2 photoreduction

With excellent physical/chemical stability and feasible synthesis, g-C₃N₄ has attracted much attention in the field of photocatalysis. However, its weak photoactivity limits its practical applications. Herein, by easily planting hydrophobic alkyl groups onto g-C₃N₄, the hydrophilicity of g-C₃N₄ can be well regulated and its specific surface area be enlarged simultaneously. Such a modification ensures enhanced CO₂ capture and increased active sites. In addition, the introduction of alkyl groups endows g-C₃N₄ with abundant charge density and efficient separation of photoinduced excitons. All these advantages synergistically contribute to the enhanced photocatalytic CO₂ reduction performance over the optimized catalyst (DCN90), and the total CO₂ conversion is 7.4-fold that of pristine g-C₃N₄ (CN).

Fiber-like ZnO with highly dispersed Pt nanoparticles for enhanced photocatalytic CO2 reduction

Utilizing solar energy to convert carbon dioxide (CO₂) into chemical fuels could simultaneously mitigate the greenhouse effect and fossil fuel crisis. Herein, a heterogeneous photocatalyst of ZnO nanofiber deposited by Pt nanoparticles was successfully synthesized toward photocatalytic CO₂ reduction via radio-frequency thermal plasma and photo-deposition method. The Pt nanoparticles were introduced on the surface of ZnO nanofibers to broaden the light absorption and utilization, increase the additional reaction active sites and facilitate the separation of photo-generated electron/hole pairs. Combined with the natural advantages of short transfer path of charge carriers and self-support effecting in humid reaction environment for nanofibers, the Pt/ZnO hetero-junction nanocomposites displayed superior photocatalytic activity for CO₂ reduction with respect to bare ZnO nanofibers, affording a CO-production rate as high as 45.76 μmol g^-1 h^-1 under 300 W Xe lamp irradiation within a gas-solid reaction system. Furthermore, in-suit Fourier transform infrared (FTIR) spectra were applied to unveil the details during photocatalytic CO₂ reduction. This work presents a hetero-junction nanocomposite photocatalyst based on eco-friendly semiconductor and metal materials.

Hybrid Metal-Organic Frameworks Encapsulated Hybrid Ni-Doped CdS Nanoparticles for Visible-Light-Driven CO2 Reduction

The photocatalytic production of syngas from CO₂ and water is an attractive and straightforward way for both solar energy storage and sustainable development. Here, we combined the hybrid shell of a bimetallic metal-organic framework (MOF) Zn/Co-zeolitic imidazolate framework (ZIF) and the hybrid photoactive center of Ni-doped CdS nanoparticles (Ni@CdS) to construct a new "2 + 2" photocatalysis system Ni@CdS⊂Zn/Co-ZIF through a facile self-assembly process, which exhibited a double-synergic effect for visible light harvesting and CO₂ conversion, leading to one of the highest photocatalytic syngas production rates and excellent recyclability. The H₂/CO of syngas ratios can be readily adjusted by controlling the ratio of Zn/Co in the hybrid MOF shell.

Non-Noble Plasmonic Metal-Based Photocatalysts

Solar-to-chemical energy conversion via heterogeneous photocatalysis is one of the sustainable approaches to tackle the growing environmental and energy challenges. Among various promising photocatalytic materials, plasmonic-driven photocatalysts feature prominent solar-driven surface plasmon resonance (SPR). Non-noble plasmonic metals (NNPMs)-based photocatalysts have been identified as a unique alternative to noble metal-based ones due to their advantages like earth-abundance, cost-effectiveness, and large-scale application capability. This review comprehensively summarizes the most recent advances in the synthesis, characterization, and properties of NNPMs-based photocatalysts. After introducing the fundamental principles of SPR, the attributes and functionalities of NNPMs in governing surface/interfacial photocatalytic processes are presented. Next, the utilization of NNPMs-based photocatalytic materials for the removal of pollutants, water splitting, CO₂ reduction, and organic transformations is discussed. The review concludes with current challenges and perspectives in advancing the NNPMs-based photocatalysts, which are timely and important to plasmon-based photocatalysis, a truly interdisciplinary field across materials science, chemistry, and physics.

Emerging S-Scheme Photocatalyst

Photocatalysis is a green technology to use ubiquitous and intermittent sunlight. The emerging S-scheme heterojunction has demonstrated its superiority in photocatalysis. This article covers the state-of-the-art progress and provides new insights into its general designing criteria. It starts with the challenges confronted by single photocatalyst from the perspective of energy dissipation by borrowing the common behaviors in the dye molecule. Subsequently, other problems faced by single photocatalyst are summarized. Then a viable solution for these problems is the construction of heterojunctions. To overcome the problems and mistakes of type-II and Z-scheme heterojunctions, S-scheme heterojunction is proposed and the underlying reaction mechanism is summarized. Afterward, the design principles for S-scheme heterojunction are proposed and four types of S-scheme heterojunctions are suggested. Following this, direct characterization techniques for testifying the charge transfer in S-scheme heterojunction are presented. Finally, different photocatalytic applications of S-scheme heterojunctions are summarized. Specifically, this work endeavors to clarify the critical understanding on curved Fermi level in S-scheme heterojunction interface, which can help strengthen and advance the fundamental theories of photocatalysis. Moreover, the current challenges and prospects of the S-scheme heterojunction photocatalyst are critically discussed.

Optimizing Atomic Hydrogen Desorption of Sulfur-Rich NiS1+ x Cocatalyst for Boosting Photocatalytic H2 Evolution

Low-cost transition-metal chalcogenides (MS_x ) are demonstrated to be potential candidate cocatalyst for photocatalytic H₂ generation. However, their H₂ -generation performance is limited by insufficient quantities of exposed sulfur (S) sites and their strong bonding with adsorbed hydrogen atoms (SH_ads ). To address these issues, an efficient coupling strategy of active-site-enriched regulation and electronic structure modification of active S sites is developed by rational design of core-shell Au@NiS_{1+ x} nanostructured cocatalyst. In this case, the Au@NiS_{1+ x} cocatalyst can be skillfully fabricated to synthesize the Au@NiS_{1+ x} modified TiO₂ (denoted as TiO₂ /Au@NiS_{1+ x} ) by a two-step route. Photocatalytic experiments exhibit that the resulting TiO₂ /Au@NiS_{1+ x} (1.7:1.3) displays a boosted H₂ -generation rate of 9616 µmol h^-1 g^-1 with an apparent quantum efficiency of 46.0%  at 365 nm, which is 2.9 and 1.7 times the rate over TiO₂ /NiS_{1+ x} and TiO₂ /Au, respectively. In situ/ex situ XPS characterization and density functional theory calculations reveal that the free-electrons of Au can transfer to sulfur-enriched NiS_{1+ x} to induce the generation of electron-enriched S^{δ -} active centers, which boosts the desorption of H_ads for rapid hydrogen formation via weakening the strong SH_ads bonds. Hence, an electron-enriched S^{δ -} -mediated mechanism is proposed. This work delivers a universal strategy for simultaneously increasing the active site number and optimizing the binding strength between the active sites and hydrogen adsorbates.

Bifunctional thioacetamide-mediated synthesis of few-layered MoOSx nanosheet-modified CdS hollowspheres for efficient photocatalytic H2 production

Constructing efficient cocatalyst-modified hollow-structured photocatalysts holds great potential in the photocatalytic H2 evolution field. Regrettably, it still remains a formidable challenge to develop cost-effective cocatalysts and explore simple synthetic methods...