Engineering a passivating electric double layer for high performance lithium metal batteries

Interface engineering enabled by sodium dodecyl sulfonate surfactant for stable Zn metal batteries

Aqueous zinc-ion batteries are emerging as powerful candidates for large-scale energy storage, due to their inherent high safety and high theoretical capacity. However, the inevitable hydrogen evolution and side effects of the deposition process limit their lifespan, which requires rational engineering of the interface between anode and aqueous electrolyte. In this paper, an anionic surfactant as electrolyte additive, sodium dodecyl sulfonate (SDS), is introduced to deliver highly reversible zinc metal batteries. Unlike traditional surfactants, the solvation structure is not affected by SDS, which tends to adsorb on the (002) crystal plane of Zn with the purpose of effectively limiting the water molecules adsorption. Attributed to the natural hydrophobic part of SDS, a dynamic electrostatic shielding layer and a unique hydrophobic interface are constructed on the anode. Assisted by the above merits, the adverse surface corrosion, hydrogen evolution and dendrite growth are significantly inhibited without the sacrifice in the deposition kinetics of Zn ions. As a result, the Zn||Zn symmetric batteries demonstrate an increased cycle life of 2000 h (1 mA cm-2, 1 mA h cm-2) with the presence of SDS additive. Such strategy provides a new avenue for the developing advanced electrolytes to be applied in aqueous energy storage systems.

Structure and Dynamics of Aqueous 2-Aminothiazole/NaCl Electrolytes at Electrified Interfaces

A computational study was performed to investigate the dynamics of aqueous electrolytes containing organic corrosion inhibitors near electrified interfaces by using the constant-charge model in classical molecular dynamics simulations. The results showed that when inhibitors form films at the interface, the surface charge of the electrode causes displacement of the molecules, referred to as electroporation. The hydrophobicity of the inhibitor molecules affects both the stability of the films and their recovery time. This study highlights the value of computational investigations of the dynamics within inhibitor films as a complementary approach to the traditional focus on inhibitor-substrate interactions, leading to deeper insights into the mechanisms of corrosion inhibition mechanisms.

Highly Reversible Positive-Valence Conversion of Sulfur Chemistry for High-Voltage Zinc-Sulfur Batteries

Sulfur is a promising conversion-type cathode for zinc batteries (ZBs) due to its high discharge capacity and cost-effectiveness. However, the redox conversion of multivalent S in ZBs is still limited, only having achieved S0/S2- redox conversion with low discharge voltage and poor reversibility. This study presents significant progress by demonstrating, for the first time, the reversible S2-/S4+ redox behavior in ZBs with up to six-electron transfer (with an achieved discharge capacity of ≈1284 mAh g-1) using a highly concentrated ClO4 --containing electrolyte. The developed succinonitrile-Zn(ClO4)2 eutectic electrolyte stabilizes the positive-valence S compound and contributes to an ultra-low polarization voltage. Notably, the achieved flat discharge plateaus demonstrate the highest operation voltage (1.54 V) achieved to date in Zn‖S batteries. Furthermore, the high-voltage Zn‖S battery exhibits remarkable conversion dynamics, excellent cycling performance (85.7% capacity retention after 500 cycles), high efficiency (98.4%), and energy density (527 Wh kg S -1). This strategy of positive-valence conversion of sulfur represents a significant advancement in understanding sulfur chemistry in batteries and holds promise for future high-voltage sulfur-based batteries.

Polyoxometalate-based plasmonic electron sponge membrane for nanofluidic osmotic energy conversion

Nanofluidic membranes have demonstrated great potential in harvesting osmotic energy. However, the output power densities are usually hampered by insufficient membrane permselectivity. Herein, we design a polyoxometalates (POMs)-based nanofluidic plasmonic electron sponge membrane (PESM) for highly efficient osmotic energy conversion. Under light irradiation, hot electrons are generated on Au NPs surface and then transferred and stored in POMs electron sponges, while hot holes are consumed by water. The stored hot electrons in POMs increase the charge density and hydrophilicity of PESM, resulting in significantly improved permselectivity for high-performance osmotic energy conversion. In addition, the unique ionic current rectification (ICR) property of the prepared nanofluidic PESM inhibits ion concentration polarization effectively, which could further improve its permselectivity. Under light with 500-fold NaCl gradient, the maximum output power density of the prepared PESM reaches 70.4 W m-2, which is further enhanced even to 102.1 W m-2 by changing the ligand to P5W30. This work highlights the crucial roles of plasmonic electron sponge for tailoring the surface charge, modulating ion transport dynamics, and improving the performance of nanofluidic osmotic energy conversion.

Inorganic Composition Modulation of Solid Electrolyte Interphase for Fast Charging Lithium Metal Batteries

The solid electrolyte interphase (SEI) with lithium fluoride (LiF) is critical to the performance of lithium metal batteries (LMBs) due to its high stability and mechanical properties. However, the low Li ion conductivity of LiF impedes the rapid diffusion of Li ions in the SEI, which leads to localized Li ion oversaturation dendritic deposition and hinders the practical applications of LMBs at high-current regions (>3 C). To address this issue, a fluorophosphated SEI rich with fast ion-diffusing inorganic grain boundaries (LiF/Li3P) is introduced. By utilizing a sol electrolyte that contains highly dispersed porous LiF nanoparticles modified with phosphorus-containing functional groups, a fluorophosphated SEI is constructed and the presence of electrochemically active Li within these fast ion-diffusing grain boundaries (GBs-Li) that are non-nucleated is demonstrated, ensuring the stability of the Li || NCM811 cell for over 1000 cycles at fast-charging rates of 5 C (11 mA cm-2). Additionally, a practical, long cycling, and intrinsically safe LMB pouch cell with high energy density (400 Wh kg-1) is fabricated. The work reveals how SEI components and structure design can enable fast-charging LMBs.

Electrolytes Design for Extending the Temperature Adaptability of Lithium-Ion Batteries: from Fundamentals to Strategies

With the continuously growing demand for wide-range applications, lithium-ion batteries (LIBs) are increasingly required to work under conditions that deviate from room temperature (RT). However, commercial electrolytes exhibit low thermal stability at high temperatures (HT) and poor dynamic properties at low temperatures (LT), hindering the operation of LIBs under extreme conditions. The bottleneck restricting the practical applications of LIBs has promoted researchers to pay more attention to developing a series of innovative electrolytes. This review primarily covers the design of electrolytes for LIBs from a temperature adaptability perspective. First, the fundamentals of electrolytes concerning temperature, including donor number (DN), dielectric constant, viscosity, conductivity, ionic transport, and theoretical calculations are elaborated. Second, prototypical examples, such as lithium salts, solvent structures, additives, and interfacial layers in both liquid and solid electrolytes, are presented to explain how these factors can affect the electrochemical behavior of LIBs at high or low temperatures. Meanwhile, the principles and limitations of electrolyte design are discussed under the corresponding temperature conditions. Finally, a summary and outlook regarding electrolytes design to extend the temperature adaptability of LIBs are proposed.

3D Crown Ether Covalent Organic Framework as Interphase Layer toward High-Performance Lithium Metal Batteries

The practical application of lithium (Li) metal batteries is inhibited by accumulative Li dendrites and continuous active Li consumption during cycling, which results in a low Coulombic efficiency and short lifetime. Constructing artificial solid-electrolyte interphase (SEI) layer in Li anode, such as 2D covalent organic frameworks (COFs), is an effective strategy to restrain the formation of Li dendrites and improve cycling performance. However, the exploration of 3D COFs as protecting layers is rarely reported, because of the preconception that the interconnect pores in 3D COFs eventually cause Li dendrites in disordered direction. 3D crown ether-based COF with ffc topology as interphase layer, in which the crown ether units are arranged in parallel and vertical orientation along the electrode, is demonstrated. The strong coupling effect between the crown ether and Li+ accelerates Li+ diffusion kinetics and enables homogeneous Li+ flux, resulting in a high Li+ transference number of 0.85 and smooth Li deposition in 3D direction. Li/COF-Cu cells display a lower Li-nucleation overpotential (17.4 mV) and high average Coulombic efficiency of ≈98.6% during 340 cycles with COF incorporation. This work gives a new insight into designing COFs for energy storage systems.

Ether-Based High-Voltage Lithium Metal Batteries: The Road to Commercialization

Ether-based high-voltage lithium metal batteries (HV-LMBs) are drawing growing interest due to their high compatibility with the Li metal anode. However, the commercialization of ether-based HV-LMBs still faces many challenges, including short cycle life, limited safety, and complex failure mechanisms. In this Review, we discuss recent progress achieved in ether-based electrolytes for HV-LMBs and propose a systematic design principle for the electrolyte based on three important parameters: electrochemical performance, safety, and industrial scalability. Finally, we summarize the challenges for the commercial application of ether-based HV-LMBs and suggest a roadmap for future development.

Reversible Carbon Dioxide/Lithium Oxalate Regulation toward Advanced Aprotic Lithium Carbon Dioxide Battery

Li-CO2 batteries have received significant attention owing to their advantages of combining greenhouse gas utilization and energy storage. However, the high kinetic barrier between gaseous CO2 and the Li2CO3 product leads to a low operating voltage (<2.5 V) and poor energy efficiency. In addition, the reversibility of Li2CO3 has always been questioned owing to the introduction of more decomposition paths caused by its higher charging plateau. Here, a novel "trinity" Li-CO2 battery system was developed by synergizing CO2, soluble redox mediator (2,2,6,6-tetramethylpiperidoxyl, as TEM RM), and reduced graphene oxide electrode to enable selective conversion of CO2 to Li2C2O4. The designed Li-CO2 battery exhibited an output plateau reaching up to 2.97 V, higher than the equilibrium potential of 2.80 V for Li2CO3, and an ultrahigh round-trip efficiency of 97.1 %. The superior performance of Li-CO2 batteries is attributed to the TEM RM-mediated preferential growth mechanism of Li2C2O4, which enhances the reaction kinetics and rechargeability. Such a unique design enables batteries to cope with sudden CO2-deficient environments, which provides an avenue for the rationally design of CO2 conversion reactions and a feasible guide for next-generation Li-CO2 batteries.

Deshielding Anions Enable Solvation Chemistry Control of LiPF6-Based Electrolyte toward Low-Temperature Lithium-Ion Batteries

Severe capacity decay under subzero temperatures remains a significant challenge for lithium-ion batteries (LIBs) due to the sluggish interfacial kinetics. Current efforts to mitigate this deteriorating interfacial behavior rely on high-solubility lithium salts (e.g., Lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), Lithium bis(fluorosulfonyl)imide (LiFSI))-based electrolytes to construct anion participated solvation structures. However, such electrolytes bring issues of corrosion on the current collector and increased costs. Herein, the most commonly used Lithium hexafluorophosphate (LiPF6) instead, to establish a peculiar solvation structure with a high ratio of ion pairs and aggregates by introducing a deshielding NO3 - additive for low-temperature LIBs is utilized. The deshielding anion significantly reduces the energy barrier for interfacial behavior at low temperatures. Benefiting from this, the graphite (Gr) anode retains a high capacity of ≈72.3% at -20 °C, which is far superior to the 32.3% and 19.4% capacity retention of counterpart electrolytes. Moreover, the LiCoO2/Gr full cell exhibits a stable cycling performance of 100 cycles at -20 °C due to the inhibited lithium plating. This work heralds a new paradigm in LiPF6-based electrolyte design for LIBs operating at subzero temperatures.

Breaking the Solubility Limit of LiNO3 in Carbonate Electrolyte Assisted by BF3 to Construct a Stable SEI Film for Dendrite-Free Lithium Metal Batteries

Lithium (Li) metal is regarded as a potential candidate for the next generation of lithium secondary batteries, but it has poor cycling stability with the broadly used carbonate-based electrolytes due to the uncontrollable dendritic growth and low Coulombic efficiency (CE). LiNO3 is an effective additive and its limited solubility (<800 ppm) in carbonate-based electrolytes is still a challenge, as reported. Herein, using BF3 (Lewis acid) is proposed to enhance the solubility of LiNO3 in carbonate-based electrolytes. The dissolved NO3 - can be involved in the first solvation shell of Li+, reducing the coordination number of PF6 - and EC (ethylene carbonate). In addition, the NO3 - is proved to be preferentially reduced on Li metal by differential electrochemical mass spectrometry so that the decomposition of PF6 - and EC is suppressed. Therefore, a SEI layer containing Li3N can be obtained, which exhibits high lithium-ion conductivity, achieving even and dense Li deposits. Consequently, the CE of Li||Cu cell with BF3/LiNO3 can be increased to 98.07%. Moreover, the capacity retention of Li||LiFePO4 with a low N/P ratio (3:1) is as high as 90% after 300 cycles (≈1500 h). This work paved a new way for incorporating LiNO3 into carbonate-based electrolytes and high-performance lithium metal batteries.

Dual-Salt Electrolyte Additive Enables High Moisture Tolerance and Favorable Electric Double Layer for Lithium Metal Battery

The carbonate electrolyte chemistry is a primary determinant for the development of high-voltage lithium metal batteries (LMBs). Unfortunately, their implementation is greatly plagued by sluggish electrode interfacial dynamics and insufficient electrolyte thermodynamic stability. Herein, lithium trifluoroacetate-lithium nitrate (LiTFA-LiNO3 ) dual-salt additive-reinforced carbonate electrolyte (LTFAN) is proposed for stabilizing high-voltage LMBs. We reveal that 1) the in situ generated inorganic-rich electrode-electrolyte interphase (EEI) enables rapid interfacial dynamics, 2) TFA- preferentially interacts with moisture over PF6 - to strengthen the moisture tolerance of designed electrolyte, and 3) NO3 - is found to be noticeably enriched at the cathode interface on charging, thus constructing Li+ -enriched, solvent-coordinated, thermodynamically favorable electric double layer (EDL). The superior moisture tolerance of LTFAN and the thermodynamically stable EDL constructed at cathode interface play a decisive role in upgrading the compatibility of carbonate electrolyte with high-voltage cathode. The LMBs with LTFAN realize 4.3 V-NCM523/4.4 V-NCM622 superior cycling reversibility and excellent rate capability, which is the leading level of documented records for carbonate electrode.

Molecular anchoring of free solvents for high-voltage and high-safety lithium metal batteries

Constraining the electrochemical reactivity of free solvent molecules is pivotal for developing high-voltage lithium metal batteries, especially for ether solvents with high Li metal compatibility but low oxidation stability ( <4.0 V vs Li+/Li). The typical high concentration electrolyte approach relies on nearly saturated Li+ coordination to ether molecules, which is confronted with severe side reactions under high voltages ( >4.4 V) and extensive exothermic reactions between Li metal and reactive anions. Herein, we propose a molecular anchoring approach to restrict the interfacial reactivity of free ether solvents in diluted electrolytes. The hydrogen-bonding interactions from the anchoring solvent effectively suppress excessive ether side reactions and enhances the stability of nickel rich cathodes at 4.7 V, despite the extremely low Li+/ether molar ratio (1:9) and the absence of typical anion-derived interphase. Furthermore, the exothermic processes under thermal abuse conditions are mitigated due to the reduced reactivity of anions, which effectively postpones the battery thermal runaway.

Enabling an Inorganic-Rich Interface via Cationic Surfactant for High-Performance Lithium Metal Batteries

An anion-rich electric double layer (EDL) region is favorable for fabricating an inorganic-rich solid-electrolyte interphase (SEI) towards stable lithium metal anode in ester electrolyte. Herein, cetyltrimethylammonium bromide (CTAB), a cationic surfactant, is adopted to draw more anions into EDL by ionic interactions that shield the repelling force on anions during lithium plating. In situ electrochemical surface-enhanced Raman spectroscopy results combined with molecular dynamics simulations validate the enrichment of NO3-/FSI- anions in the EDL region due to the positively charged CTA+. In-depth analysis of SEI structure by X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry results confirmed the formation of the inorganic-rich SEI, which helps improve the kinetics of Li+ transfer, lower the charge transfer activation energy, and homogenize Li deposition. As a result, the Li||Li symmetric cell in the designed electrolyte displays a prolongated cycling time from 500 to 1300 h compared to that in the blank electrolyte at 0.5 mA cm-2 with a capacity of 1 mAh cm-2. Moreover, Li||LiFePO4 and Li||LiCoO2 with a high cathode mass loading of > 10 mg cm-2 can be stably cycled over 180 cycles.

Asymmetric Solvents Regulated Crystallization-Limited Electrolytes for All-Climate Lithium Metal Batteries

Electrolytes that can keep liquid state are one of the most important physical metrics to ensure the ions transfer with stable operation of rechargeable lithium-based batteries at a wide temperature window. It is generally accepted that strong polar solvents with high melting points favor the safe operation of batteries above room temperatures but are susceptible to crystallization at low temperatures (≤-40 °C). Here, a crystallization limitation strategy was proposed to handle this issue. We demonstrate that, although the high melting points of ethylene sulfite (ES, -17 °C) and fluoroethylene carbonate (FEC, ≈23 °C), their mixtures can avoid crystallization at low temperatures, which can be attributed to low intermolecular interactions and altered molecular motion dynamics. A suitable ES/FEC ratio (10 % FEC) can balance the bulk and interface transport of ions, enabling LiNi0.8 Mn0.1 Co0.1 O2 ||lithium (NCM811||Li) full cells to deliver excellent temperature resilience and cycling stability over a wide temperature range from -50 °C to +70 °C. More than 66 % of the capacity retention was achieved at -50 °C compared to room temperature. The NCM811||Li pouch cells exhibit high cycling stability under realistic conditions (electrolyte weight to cathode capacity ratio (E/C)≤3.5 g Ah-1 , negative to positive electrode capacity ratio (N/P)≤1.09) at different temperatures.

Improving dual electrodes compatibility through tailoring solvation structures enabling high-performance and low-temperature Li||LiFePO4 batteries

Li||LiFePO4 (LFP) batteries have good stability and high energy density. However, they exhibit unsatisfactory low-temperature electrochemical performance. Due to the fragile interfacial passivation layers and sluggish kinetics, commercial electrolytes fail to simultaneously achieve acceptable stabilization with dual electrodes in low-temperature Li||LFP batteries. Herein, a novel localized high-concentration electrolyte (LHCE) with great dual-electrodes compatibility is proposed to match with the low-temperature Li||LFP batteries. With increasing local concentration, the FSI- sequentially replaces the solvent molecules and enters the first solvation sheath, forming the anion-dominated solvation structures. This effectively suppresses free solvents decomposition and constructs the anion-derived passivation layers with inorganic-rich components, further contributing to the rapid transport kinetics and endowing the LHCE with great dual electrodes compatibility. These dual-electrodes co-stabilization effects of the LHCE are originally clarified in the low-temperature Li||LFP batteries. The designed LHCE also delivers low freezing point (-99.8 ℃), high ionic conductivity (2.4 mS cm-1 at -40 ℃), and superior stability (>4.7 V vs. Li/Li+). Hence, the Li||LFP batteries with LHCE possess superb cyclic stability at low temperatures, delivering a high discharge capacity of 120 mAh g-1 over 300 cycles at -20 ℃. Moreover, compared to commercial electrolytes, LHCE endows the Li||LFP batteries with superior low-temperature performances under practical conditions, including limited Li anode (3 mAh cm-2) and a wide temperature range (30 ℃ to -40 ℃).

Interface Regulation via Electric Double Layer for Rechargeable Batteries

Interphases, especially the electrochemically formed solid electrolyte interphase (SEI), are significantly important for cycling stability, reaction kinetics and safety of rechargeable batteries. The structure and composition of the electric double layer (EDL) greatly affect the formation of the SEI and the performance of electrodes. However, as far as we know, there is no review discussing the theme specifically. Herein, the recent substantial progress for EDL and its impact on the formation of SEI in rechargeable batteries are reviewed and discussed. Firstly, the specific adsorption of electrolyte components on electrodes' surface and the ionic solvation structure are introduced. Furthermore, various methods for controlling EDL in different electrode systems are described. Finally, the potential future advancements of the SEI through the manipulation of EDL are discussed, aiming to enhance the electrochemical performance of rechargeable batteries.

Adaptive Ionization-Induced Tunable Electric Double Layer for Practical Zn Metal Batteries over Wide pH and Temperature Ranges

The violent side reactions of Zn metal in aqueous electrolyte lead to sharp local-pH fluctuations at the interface, which accelerate Zn anode breakdown; thus, the development of an optimization strategy to accommodate a wide pH range is particularly critical for improving aqueous Zn metal batteries. Herein, we report a pH-adaptive electric double layer (EDL) tuned by glycine (Gly) additive with pH-dependent ionization, which exhibits excellent capability to stabilize Zn anodes in wide-pH aqueous electrolytes. It is discovered that a Gly-ionic EDL facilitates the directed migration of charge carriers in both mildly acidic and alkaline electrolytes, leading to the successful suppression of local saturation. It is worth mentioning that the regulation effect of the additive concentration on the inner Helmholtz plane (IHP) structure of Zn electrodes is clarified in depth. It is revealed that the Gly additives without dimerization can develop orderly and dense vertical adsorption within the IHP to effectively reduce the EDL repulsive force of Zn2+ and isolate H2O from the anode surface. Consequently, they Zn anode with tunable EDL exhibits superior electrochemical performance in a wide range of pH and temperature, involving the prodigious cycle reversibility of 7000 h at Zn symmetric cells with ZnSO4-Gly electrolytes and an extended lifespan of 50 times in Zn symmetric cells with KOH-Gly electrolytes. Moreover, acidic Zn powder||MnO2 pouch cells, and alkaline high-voltage Zn||Ni0.8Co0.1Mn0.1O2 cells, and Zn||NiCo-LDH cells also deliver excellent cycling reversibility. The tunable EDL enables the ultrahigh depth of discharge (DOD) of 93%. This work elucidates the design of electrolyte additives compatible in a wide range of pH and temperature, which might cause inspiration in the fields of practical multiapplication scenarios for Zn anodes.

Li2 MnO3 : A Catalyst for a Liquid Cl2 Electrode in Low-Temperature Aqueous Batteries

Li2 MnO3 has been contemplated as a high-capacity cathode candidate for Li-ion batteries; however, it evolves oxygen during battery charging under ambient conditions, which hinders a reversible reaction. However, it is unclear if this irreversible process still holds under subambient conditions. Here, the low-temperature electrochemical properties of Li2 MnO3 in an aqueous LiCl electrolyte are evaluated and a reversible discharge capacity of 302 mAh g-1 at a potential of 1.0 V versus Ag/AgCl at -78 °C with good rate capability and stable cycling performance, in sharp contrast to the findings in a typical Li2 MnO3 cell cycled at room temperature, is observed. However, the results reveal that the capacity does not originate from the reversible oxygen oxidation in Li2 MnO3 but the reversible Cl2 (l)/Cl- (aq.) redox from the electrolyte. The results demonstrate the good catalytic properties of Li2 MnO3 to promote the Cl2 /Cl- redox at low temperatures.

Strong Solvent and Dual Lithium Salts Enable Fast-Charging Lithium-Ion Batteries Operating from -78 to 60 °C

Current lithium-ion batteries degrade under high rates and low temperatures due to the use of carbonate electrolytes with restricted Li+ conduction and sluggish Li+ desolvation. Herein, a strong solvent with dual lithium salts surmounts the thermodynamic limitations by regulating interactions among Li+ ions, anions, and solvents at the molecular level. Highly dissociated lithium bis(fluorosulfonyl)imide (LiFSI) in dimethyl sulfite (DMS) solvent with a favorable dielectric constant and melting point ensures rapid Li+ conduction while the high affinity between difluoro(oxalato)borate anions (DFOB-) and Li+ ions guarantees smooth Li+ desolvation within a wide temperature range. In the meantime, the ultrathin self-limited electrode/electrolyte interface and the electric double layer induced by DFOB- result in enhanced electrode compatibility. The as-formulated electrolyte enables stable cycles at high currents (41.3 mA cm-2) and a wide temperature range from -78 to 60 °C. The 1 Ah graphite||LiCoO2 (2 mAh cm-2) pouch cell achieves 80% reversible capacity at 2 C rate under -20 °C and 86% reversible capacity at 0.1 C rate under -50 °C. This work sheds new light on the electrolyte design with strong solvent and dual lithium salts and further facilitates the development of high-performance lithium-ion batteries operating under extreme conditions.

Optimizing Li-ion Solvation in Gel Polymer Electrolytes to Stabilize Li-Metal Anode

Gel polymer electrolytes (GPEs) have potential as substitutes for liquid electrolytes in lithium-metal batteries (LMBs). Their semi-solid state also makes GPEs suitable for various applications, including wearables and flexible electronics. Here, we report the initiation of ring-opening polymerization of 1,3-dioxolane (DOL) by Lewis acid and the introduction of diluent 1,1,2,2-tetrafluoroethyl 2,2,3,3-tetrafluoropropyl ether (TTE) to regulate electrolyte structure for a more stable interface. This diluent-blended GPE exhibits enhanced electrochemical stability and ion transport properties compared to a blank version without it. FTIR and NMR proved the effectiveness of monomer polymerization and further determined the molecular weight distribution of polymerization by gel permeation chromatography (GPC). Experimental and simulation results show that the addition of TTE enhances ion association and tends to distribute on the anode surface to construct a robust and low-impedance SEI. Thus, the polymer battery achieves 5 C charge-discharge at room temperature and 200 cycles at low temperature -20 °C. The study presents an effective approach for regulating solvation structures in GPEs, promoting advancements in the future design of GPE-based LMBs.

Fluorinated Carbamate-Based Electrolyte Enables Anion-Dominated Solid Electrolyte Interphase for Highly Reversible Li Metal Anode

Li metal is regarded as the most promising battery anode to boost energy density. However, being faced with the hostile compatibility between the Li anode and traditional carbonate electrolyte, its large-scale industrialization has been in a distressing circumstance due to severe dendrite growth caused by unsatisfying solid electrolyte interphase (SEI). With this regard, accurate control over the composition of the SEI is urgently desired to tackle the electrochemical and mechanical instability at the electrolyte/anode interface. Herein, we report a rationally designed fluorinated carbamate-based electrolyte employing LiNO3 as one of the main salts to induce the preferable anion decomposition to achieve a homogeneous and inorganic (LiF, Li3N, Li2O)-rich SEI. Thus, this electrolyte achieves a high Coulombic efficiency of 99% of the Li metal anode, a stable cycling over 1000 h for Li|Li symmetric cells, more than 100 cycles in 40-μm-thin Li|high-loading-NCM811 full batteries, and >50 cycles in Cu|LiFePO4 pouch cells, which is a promising electrolyte for highly reversible Li metal batteries.

Tuning and Balancing the Donor Number of Lithium Salts and Solvents for High-Performance Li Metal Anode

The low reversibility of Li deposition/stripping in conventional carbonate electrolytes hinders the development of lithium metal batteries. Herein, we proposed a combination of solvents with a moderate donor number (DN) and LiNO3 as the sole salt, which has rarely been attempted due to its low solubility or dissociation degree in common solvents. It is found that the DN value of solvents is highly correlated to the reversibility of Li deposition behavior when LiNO3 is applied as the sole salt. The combination of LiNO3 and solvents with moderate DN behaves like a quasi-concentrated electrolyte even at a common or moderate concentration, while neither the solvents with poor solubility and low dissociation for LiNO3 (which usually corresponds to a low DN) nor the solvents with high dissociation for LiNO3 (which usually corresponds to an overly high DN) can achieve a high reversibility for low conductivity or excessive solvent decomposition. As a result, a Coulombic efficiency as high as 99.6% for Li deposition/stripping is achieved with the optimized combination. We believe this work will give a better understanding of the role of anions and solvents in the regulation of the solvation structure, and DN can be utilized as an important guideline to sieve suitable solvents for LiNO3 as the main salt to exhibit intriguing properties beyond traditional cognition.

Unlocking Reversible Silicon Redox for High-Performing Chlorine Batteries

Chlorine (Cl)-based batteries such as Li/Cl2 batteries are recognized as promising candidates for energy storage with low cost and high performance. However, the current use of Li metal anodes in Cl-based batteries has raised serious concerns regarding safety, cost, and production complexity. More importantly, the well-documented parasitic reactions between Li metal and Cl-based electrolytes require a large excess of Li metal, which inevitably sacrifices the electrochemical performance of the full cell. Therefore, it is crucial but challenging to establish new anode chemistry, particularly with electrochemical reversibility, for Cl-based batteries. Here we show, for the first time, reversible Si redox in Cl-based batteries through efficient electrolyte dilution and anode/electrolyte interface passivation using 1,2-dichloroethane and cyclized polyacrylonitrile as key mediators. Our Si anode chemistry enables significantly increased cycling stability and shelf lives compared with conventional Li metal anodes. It also avoids the use of a large excess of anode materials, thus enabling the first rechargeable Cl2 full battery with remarkable energy and power densities of 809 Wh kg-1 and 4,277 W kg-1 , respectively. The Si anode chemistry affords fast kinetics with remarkable rate capability and low-temperature electrochemical performance, indicating its great potential in practical applications.

The Interaction in Electrolyte Additives Accelerates Ion Transport to Achieve High-Energy Non-Aqueous Lithium Metal Batteries

Electrolyte engineering is a feasible strategy to realize high energy density lithium metal batteries. However, stabilizing both lithium metal anodes and nickel-rich layered cathodes is extremely challenging. To break through this bottleneck, a dual-additives electrolyte containing fluoroethylene carbonate (10 vol.%) and 1-methoxy-2-propylamine (1 vol.%) in conventional LiPF6 -containing carbonate-based electrolyte is reported. The two additives can polymerize and thus generate dense and uniform LiF and Li3 N-containing interphases on both electrodes' surfaces. Such robust ionic conductive interphases not only prevent lithium dendrite formation in lithium metal anode but also suppress stress-corrosion cracking and phase transformation in nickel-rich layered cathode. The advanced electrolyte enables Li||LiNi0.8 Co0.1 Mn0.1 O2 stably cycle for 80 cycles at 60 mA g-1 with a specific discharge capacity retention of 91.2% under harsh conditions.

Diatomite-Templated Synthesis of Single-Atom Cobalt-Doped MoS2 /Carbon Composites to Boost Sodium Storage

2D transition metal dichalcogenides (TMDCs) and single-atom catalysts (SACs) are promising electrodes for energy conversion/storage because of the layered structure and maximum atom utilization efficiency. However, the integration of such two type materials and the relevant sodium storage applications remain daunting challenges. Here, an ingenious diatomite-templated synthetic strategy is designed to fabricate single-atom cobalt-doped MoS2 /carbon (SA Co-MoS2 /C) composites toward the high-performance sodium storage. Benefiting from the unique hierarchical structure, high electron/sodium-ion conductivity, and abundant active sites, the obtained SA Co-MoS2 /C reveals remarkable specific capacity (≈604.0 mAh g-1 at 0.1 A g-1 ), high rate performance, and outstanding long cyclic stability. Particularly, the sodium-ion full cell composed of SA Co-MoS2 /C anode and Na3 V2 (PO4 )3 cathode demonstrates unexpected stability with the cycle number exceeded 1200. The internal sodium storage mechanism is clarified with the aid of density functional theory calculations and in situ experimental characterizations. This work not only represents a substantial leap in terms of synthesizing SACs on 2D TMDCs but also provides a crucial step toward the practical sodium-ion battery applications.

In Situ Fabricated Non-Flammable Quasi-Solid Electrolytes for Li-Metal Batteries

Lithium metal batteries (LMBs) are viewed as one of the most promising high energy density battery systems, but their practical application is hindered by significant fire hazards and fast performance degradation due to the lack of a safe and compatible configuration. Herein, nonflammable quasi-solid electrolytes (NQSEs) are designed and fabricated by using the in situ polymerization method, in which 1,3,2-dioxathiolan-2,2-oxide is used as both initiator to trigger the in situ polymerization of solvents and interphase formation agent to construct robust interface layers to protect the electrodes, and triethyl phosphate as a fire-retardant agent. The NQSEs show a high ionic conductivity of 0.38 mS cm-1 at room temperature and enable intimate solid-electrolyte interphases, and demonstrate excellent performance with stable plating/striping of Li metal anode, and high voltage (4.5 V) and high temperature (>60 °C) survivability. The findings provide an effective strategy to build high-temperature, high-energy density, and safe quasi-solid LMBs.

Supramolecular Polymer Ion Conductor with Weakened Li Ion Solvation Enables Room Temperature All-Solid-State Lithium Metal Batteries

Improved durability, enhanced interfacial stability, and room temperature applicability are desirable properties for all-solid-state lithium metal batteries (ASSLMBs), yet these desired properties are rarely achieved simultaneously. Here, in this work, it is noticed that the huge resistance at Li metal/electrolyte interface dominantly impeded the normal cycling of ASSLMBs especially at around room temperature (<30 °C). Accordingly, a supramolecular polymer ion conductor (SPC) with "weak solvation" of Li+ was prepared. Benefiting from the halogen-bonding interaction between the electron-deficient iodine atom (on 1,4-diiodotetrafluorobenzene) and electron-rich oxygen atoms (on ethylene oxide), the O-Li+ coordination was significantly weakened. Therefore, the SPC achieves rapid Li+ transport with high Li+ transference number, and importantly, derives a unique Li2 O-rich SEI with low interfacial resistance on lithium metal surface, therefore enabling stable cycling of ASSLMBs even down to 10 °C. This work is a new exploration of halogen-bonding chemistry in solid polymer electrolyte and highlights the importance of "weak solvation" of Li+ in the solid-state electrolyte for room temperature ASSLMBs.

Temperature-dependent interphase formation and Li+ transport in lithium metal batteries

High-performance Li-ion/metal batteries working at a low temperature (i.e., <-20 °C) are desired but hindered by the sluggish kinetics associated with Li+ transport and charge transfer. Herein, the temperature-dependent Li+ behavior during Li plating is profiled by various characterization techniques, suggesting that Li+ diffusion through the solid electrolyte interface (SEI) layer is the key rate-determining step. Lowering the temperature not only slows down Li+ transport, but also alters the thermodynamic reaction of electrolyte decomposition, resulting in different reaction pathways and forming an SEI layer consisting of intermediate products rich in organic species. Such an SEI layer is metastable and unsuitable for efficient Li+ transport. By tuning the solvation structure of the electrolyte with a lower lowest unoccupied molecular orbital (LUMO) energy level and polar groups, such as fluorinated electrolytes like 1 mol L-1 lithium bis(fluorosulfonyl)imide (LiFSI) in methyl trifluoroacetate (MTFA): fluoroethylene carbonate (FEC) (8:2, weight ratio), an inorganic-rich SEI layer more readily forms, which exhibits enhanced tolerance to a change of working temperature (thermodynamics) and improved Li+ transport (kinetics). Our findings uncover the kinetic bottleneck for Li+ transport at low temperature and provide directions to enhance the reaction kinetics/thermodynamics and low-temperature performance by constructing inorganic-rich interphases.

Bridging multiscale interfaces for developing ionically conductive high-voltage iron sulfate-containing sodium-based battery positive electrodes

Non-aqueous sodium-ion batteries (SiBs) are a viable electrochemical energy storage system for grid storage. However, the practical development of SiBs is hindered mainly by the sluggish kinetics and interfacial instability of positive-electrode active materials, such as polyanion-type iron-based sulfates, at high voltage. Here, to circumvent these issues, we proposed the multiscale interface engineering of Na_2.26Fe_1.87(SO₄)₃, where bulk heterostructure and exposed crystal plane were tuned to improve the Na-ion storage performance. Physicochemical characterizations and theoretical calculations suggested that the heterostructure of Na₆Fe(SO₄)₄ phase facilitated ionic kinetics by densifying Na-ion migration channels and lowering energy barriers. The (11-2) plane of Na_2.26Fe_1.87(SO₄)₃ promoted the adsorption of the electrolyte solution ClO₄^- anions and fluoroethylene carbonate molecules, which formed an inorganic-rich Na-ion conductive interphase at the positive electrode. When tested in combination with a presodiated FeS/carbon-based negative electrode in laboratory- scale single-layer pouch cell configuration, the Na_2.26Fe_1.87(SO₄)₃-based positive electrode enables an initial discharge capacity of about 83.9 mAh g^-1, an average cell discharge voltage of 2.35 V and a specific capacity retention of around 97% after 40 cycles at 24 mA g^-1 and 25 °C.

Tuning the Li+ Solvation Structure by a "Bulky Coordinating" Strategy Enables Nonflammable Electrolyte for Ultrahigh Voltage Lithium Metal Batteries

In battery electrolyte design principles, tuning Li⁺ solvation structure is an effective way to connect electrolyte chemistry with interfacial chemistry. Although recent proposed solvation tuning strategies are able to improve battery cyclability, a comprehensive strategy for electrolyte design remains imperative. Here, we report a solvation tuning strategy by utilizing molecular steric effect to create a "bulky coordinating" structure. Based on this strategy, the designed electrolyte generates an inorganic-rich solid electrolyte interphase (SEI) and cathode-electrolyte interphase (CEI), leading to excellent compatibility with both Li metal anodes and high-voltage cathodes. Under an ultrahigh voltage of 4.6 V, Li/NMC811 full-cells (N/P = 2.0) hold an 84.1% capacity retention over 150 cycles and industrial Li/NMC811 pouch cells realize an energy density of 495 Wh kg^-1. This study provides innovative insights into Li⁺ solvation tuning for electrolyte engineering and offers a promising path toward developing high-energy Li metal batteries.

Strongly Solvating Ether Electrolytes for High-Voltage Lithium Metal Batteries

Ethers are promising electrolytes for lithium (Li) metal batteries (LMBs) because of their unique stability with Li metal. Although intensive research on designing anion-enriched electrolyte solvation structures has greatly improved their electrochemical stabilities, ether electrolytes are approaching an anodic bottleneck. Herein, we reveal the strong correlation between electrolyte solvation structure and oxidation stability. In contrast to previous designs of weakly solvating solvents for enhanced anion reactivities, the triglyme (G3)-based electrolyte with the largest Li⁺ solvation energy among different linear ethers demonstrates greatly improved stability on Ni-rich cathodes under an ultrahigh voltage of 4.7 V (93% capacity retention after 100 cycles). Ether electrolytes with a stronger Li⁺ solvating ability could greatly suppress deleterious oxidation side reactions by decreasing the lifetime of free labile ether molecules. This study provides critical insights into the dynamics of the solvation structure and its significant influence on the interfacial stability for future development of high-efficiency electrolytes for high-energy-density LMBs.

Nanoarchitecture factors of solid electrolyte interphase formation via 3D nano-rheology microscopy and surface force-distance spectroscopy

The solid electrolyte interphase in rechargeable Li-ion batteries, its dynamics and, significantly, its nanoscale structure and composition, hold clues to high-performing and safe energy storage. Unfortunately, knowledge of solid electrolyte interphase formation is limited due to the lack of in situ nano-characterization tools for probing solid-liquid interfaces. Here, we link electrochemical atomic force microscopy, three-dimensional nano-rheology microscopy and surface force-distance spectroscopy, to study, in situ and operando, the dynamic formation of the solid electrolyte interphase starting from a few 0.1 nm thick electrical double layer to the full three-dimensional nanostructured solid electrolyte interphase on the typical graphite basal and edge planes in a Li-ion battery negative electrode. By probing the arrangement of solvent molecules and ions within the electric double layer and quantifying the three-dimensional mechanical property distribution of organic and inorganic components in the as-formed solid electrolyte interphase layer, we reveal the nanoarchitecture factors and atomistic picture of initial solid electrolyte interphase formation on graphite-based negative electrodes in strongly and weakly solvating electrolytes.

Simultaneous Stabilization of Lithium Anode and Cathode using Hyperconjugative Electrolytes for High-voltage Lithium Metal Batteries

Although great progress has been made in new electrolytes for lithium metal batteries (LMBs), the intrinsic relationship between electrolyte composition and cell performance remains unclear due to the lack of valid quantization method. Here, we proposed the concept of negative center of electrostatic potential (NCESP) and Mayer bond order (MBO) to describe solvent capability, which highly relate to solvation structure and oxidation potential, respectively. Based on established principles, the selected electrolyte with 1.7 M LiFSI in methoxytrimethylsilane (MOTMS)/ (trifluoromethyl)trimethylsilane (TFMTMS) shows unique hyperconjugation nature to stabilize both Li anode and high-voltage cathode. The 4.6 V 30 μm Li||4.5 mAh cm^-2 lithium cobalt oxide (LCO) (low N/P ratio of 1.3) cell with our electrolyte shows stable cycling with 91 % capacity retention over 200 cycles. The bottom-up design concept of electrolyte opens up a general strategy for advancing high-voltage LMBs.

Ultrathin CuF2 -Rich Solid-Electrolyte Interphase Induced by Cation-Tailored Double Electrical Layer toward Durable Sodium Storage

Solid-electrolyte interphase (SEI) seriously affects battery's cycling life, especially for high-capacity anode due to excessive electrolyte decomposition from particle fracture. Herein, we report an ultrathin SEI (3-4 nm) induced by Cu⁺ -tailored double electrical layer (EDL) to suppress electrolyte consumption and enhance cycling stability of CuS anode in sodium-ion batteries. Unique EDL with SO₃ CF₃ -Cu complex absorbing on CuS in NaSO₃ CF₃ /diglyme electrolyte is demonstrated by in situ surface-enhanced Raman, Cyro-TEM and theoretical calculation, in which SO₃ CF₃ -Cu could be reduced to CuF₂ -rich SEI. Dispersed CuF₂ and F-containing compound can provide good interfacial contact for formation of ultrathin and stable SEI film to minimize electrolyte consumption and reduce activation energy of Na⁺ transport. As a result, the modified CuS delivers high capacity of 402.8 mAh g^-1 after 7000 cycles without capacity decay. The insights of SEI construction pave a way for high-stability electrode.

Stable Operation of Lithium Metal Batteries with Aggressive Cathode Chemistries at 4.9 V

High-voltage lithium metal batteries (LMBs) pose severe challenges for the matching of electrolytes with aggressive electrodes, especially at low temperatures. Here, we report a rational modification of the Li⁺ solvation structure to extend the voltage and temperature operating ranges of conventional electrolytes. Ion-ion and ion-dipole interactions as well as the electrochemical window of solvents were tailored to improve oxidation stability and de-solvation kinetics of the electrolyte. Meanwhile, robust and elastic B and F-rich interphases are formed on both electrodes. Such optimization enables Li||LiNi_0.5 Mn_1.5 O₄ cells (90.2 % retention after 400 cycles) and Li||LiNi_0.6 Co_0.2 Mn_0.2 O₂ (NCM622) cells (74.0 % retention after 200 cycles) to cycle stably at an ultra-high voltage of 4.9 V. Moreover, NCM622 cells deliver a considerable capacity of 143.5 mAh g^-1 at -20 °C, showing great potential for practical uses. The proposed strategy sheds light on further optimization for high-voltage LMBs.

Electrolyte engineering via ether solvent fluorination for developing stable non-aqueous lithium metal batteries

Fluorination of ether solvents is an effective strategy to improve the electrochemical stability of non-aqueous electrolyte solutions in lithium metal batteries. However, excessive fluorination detrimentally impacts the ionic conductivity of the electrolyte, thus limiting the battery performance. Here, to maximize the electrolyte ionic conductivity and electrochemical stability, we introduce the targeted trifluoromethylation of 1,2-dimethoxyethane to produce 1,1,1-trifluoro-2,3-dimethoxypropane (TFDMP). TFDMP is used as a solvent to prepare a 2 M non-aqueous electrolyte solution comprising bis(fluorosulfonyl)imide salt. This electrolyte solution shows an ionic conductivity of 7.4 mS cm^-1 at 25 °C, an oxidation stability up to 4.8 V and an efficient suppression of Al corrosion. When tested in a coin cell configuration at 25 °C using a 20 μm Li metal negative electrode, a high mass loading LiNi_0.8Co_0.1Mn_0.1O₂-based positive electrode (20 mg cm^-2) with a negative/positive (N/P) capacity ratio of 1, discharge capacity retentions (calculated excluding the initial formation cycles) of 81% after 200 cycles at 0.1 A g^-1 and 88% after 142 cycles at 0.2 A g^-1 are achieved.

Interfacial Liquid Water on Graphite, Graphene, and 2D Materials

The optical, electronic, and mechanical properties of graphite, few-layer, and two-dimensional (2D) materials have prompted a considerable number of applications. Biosensing, energy storage, and water desalination illustrate applications that require a molecular-scale understanding of the interfacial water structure on 2D materials. This review introduces the most recent experimental and theoretical advances on the structure of interfacial liquid water on graphite-like and 2D materials surfaces. On pristine conditions, atomic-scale resolution experiments revealed the existence of 1-3 hydration layers. Those layers were separated by ∼0.3 nm. The experimental data were supported by molecular dynamics simulations. However, under standard working conditions, atomic-scale resolution experiments revealed the presence of 2-3 hydrocarbon layers. Those layers were separated by ∼0.5 nm. Linear alkanes were the dominant molecular specie within the hydrocarbon layers. Paradoxically, the interface of an aged 2D material surface immersed in water does not have water molecules on its vicinity. Free-energy considerations favored the replacement of water by alkanes.

Predictive Molecular Models for Charged Materials Systems: From Energy Materials to Biomacromolecules

Electrostatic interactions play a dominant role in charged materials systems. Understanding the complex correlation between macroscopic properties with microscopic structures is of critical importance to develop rational design strategies for advanced materials. But the complexity of this challenging task is augmented by interfaces present in the charged materials systems, such as electrode-electrolyte interfaces or biological membranes. Over the last decades, predictive molecular simulations that are founded in fundamental physics and optimized for charged interfacial systems have proven their value in providing molecular understanding of physicochemical properties and functional mechanisms for diverse materials. Novel design strategies utilizing predictive models have been suggested as promising route for the rational design of materials with tailored properties. Here, an overview of recent advances in the understanding of charged interfacial systems aided by predictive molecular simulations is presented. Focusing on three types of charged interfaces found in energy materials and biomacromolecules, how the molecular models characterize ion structure, charge transport, morphology relation to the environment, and the thermodynamics/kinetics of molecular binding at the interfaces is discussed. The critical analysis brings two prominent field of energy materials and biological science under common perspective, to stimulate crossover in both research field that have been largely separated.

Homogeneous Li+ flux realized by an in situ-formed Li–B alloy layer enabling the dendrite-free lithium metal anode

The in-situ formed Li–B alloy provides abundant nucleation sites for inducing uniform Li deposition and inhibiting Li dendrite formation. The 3D porous Ni foam can provide enough space for relieving volume change.

Highly Oxidation-Resistant Electrolyte for 4.7 V Sodium Metal Batteries Enabled by Anion/Cation Solvation Engineering

Sodium metal batteries (SMBs) are considered as promising battery system due to abundant Na sources. However, poor compatibility between electrolyte and cathode severely impedes its development. Herein, we proposed an anion/cation solvation strategy for realizing 4.7 V resistant SMBs electrolyte with NaClO₄ and trimethoxy(pentafluorophenyl)silane (TPFS) as dual additives (DA). The ClO₄ ^- can rapidly transfer to the cathode surface and strongly coordinate with Na⁺ to form stable polymer-like chains with solvents. Meanwhile, TPFS can preferentially enter into the PF₆ ^- anion solvation sheath for reducing PF₆ -solvent interaction and effectively scavenge adverse electrolyte species for protecting electrode electrolyte interphases. Thus, such electrolyte elevates the oxidative stability of carbonate electrolytes from 3.77 to 4.75 V, and enables Na||Na₃ V₂ (PO₄ )₂ O₂ F (NVPF) battery with a capacity retention of 93 % and an average Coulombic efficiency (CE) of 99.6 % after 500 cycles at 4.7 V.

Designing Anion-Derived Solid Electrolyte Interphase in a Siloxane-Based Electrolyte for Lithium-Metal Batteries

The rational electrolyte design with weak solvation is regarded as an effective way to regulate the electrolyte/electrode interface (SEI) that profoundly affects the performance of Li-metal batteries. Herein, we propose a newly developed siloxane-based weakly solvating electrolyte (SiBE) with contact ion pairs (CIPs) or aggregates (AGGs) dominating the solution structure, which enables the dendrite-free Li deposition and long cycle stability of Li-metal batteries. By altering the combination of Li salts, the SiBE leads to the formation of an inorganic anion-derived solid electrolyte interphase, which is highly stable and Li⁺-conductive. Based on SiBE, the Li||LiFePO₄ (LFP) full cell can stably cycle for 1000 cycles at a 2C rate with a capacity retention of 76.9%. Even with a limited Li-metal anode, it can maintain a capacity retention of 80% after 110 cycles with a high average Coulombic efficiency of 99.8%. This work reveals that siloxane can be a promising solvent to obtain weakly solvating electrolytes, which opens a new avenue for SEI composition regulation of Li-metal batteries.