An alkyl-substituted aluminium anion with strong basicity and nucleophilicity

Multielectron Reduction of Nitrosoarene via Aluminylene-Silylene Cooperation

The cooperative effects of main-group elements pave the way for novel chemical transformations. However, the potential of bimetallic complexes featuring the most abundant aluminum and silicon elements remains largely unexplored. In this study, we present the synthesis and characterization of bis(silylene)-stabilized aluminylene 2. The cooperation between aluminylene and silylene allows for the facile cleavage of the N-O bond in nitrosoarenes, producing an aluminum imide complex 4 and tetracyclic oxazasilaalanes 5 and 6, and also promotes the dearomatization of 2-methylquinoline, yielding a silylalane 7. In addition, 2 is an effective precatalyst for the reductive coupling of nitrosoarenes to azoxyarenes. These results outline an approach for orchestrating aluminum and silicon cooperation to facilitate chemical bond activation.

Alumanyl Reduction, Reductive Coupling and C-H Isomerization of Organic Nitriles

The behavior of the potassium alumanyl, [{SiNDipp}AlK]2 ({SiNDipp} = {CH2SiMe2N(Dipp)}2; Dipp = 2,6-i-Pr2C6H3), toward organic nitriles has been investigated. In common with earlier studies of the reactivity of charge neutral Al(I) species with multiply bonded small molecules, it is suggested that the initial step in all the reactions involves [2 + 1] cycloaddition and the generation of an [η2-C=N-Al] alumina azacyclopropane unit. In the cases of o- and m-tolyl-substituted aryl nitriles, this species is too kinetically labile to allow its isolation and undergoes C-C coupling via immediate Al-C/C≡N insertion to yield the alumina diazabutadiene derivatives. In contrast, the increased steric profile of alkyl nitriles imposes a marked influence on the nature of the products formed. Consistent with the proposed sequential pathway, reaction of [{SiNDipp}AlK]2 with t-BuCN provides an isolable alumina cyclopropane species that is kinetically resistant to onward reaction with a further nitrile equivalent. While reduction in the alkyl nitrile steric demands by use of i-PrCN again facilitates C-C bond formation, the crowding of the Al center by the resultant alumina-diazabutadienediide moiety appears to be beyond the limit of kinetic viability, resulting in an unusual 2-fold C-H to N-H isomerization from one of the C-iso-propyl substituents and the isolation of a 1-alumina-2,5-diazabutadiene structure.

Formation, Structure and Reactivity of a Beryllium(0) Complex with Mgδ+-Beδ- Bond Polarization

Attempts to create a novel Mg-Be bond by reaction of [(DIPePBDI*)MgNa]2 with Be[N(SiMe3)2]2 failed; DIPePBDI*=HC[(tBu)C=N(DIPeP)]2, DIPeP=2,6-Et2C-phenyl. Even at elevated temperatures, no conversion was observed. This is likely caused by strong steric shielding of the Be center. A similar reaction with the more open Cp*BeCl gave in quantitative yield (DIPePBDI*)MgBeCp* (1). The crystal structure shows a Mg-Be bond of 2.469(4) Å. Homolytic cleavage of the Mg-Be bond requires ΔH=69.6 kcal mol-1 (cf. CpBe-BeCp 69.0 kcal mol-1 and (DIPPBDI)Mg-Mg(DIPPBDI) 55.8 kcal mol-1). Natural-Population-Analysis (NPA) shows fragment charges: (DIPePBDI*)Mg +0.27/BeCp* -0.27. The very low NPA charge on Be (+0.62) compared to Mg (+1.21) and the strongly upfield 9Be NMR signal at -23.7 ppm are in line with considerable electron density on Be and the formal oxidation state assignment of MgII-Be0. Despite this Mgδ+-Beδ- polarity, 1 is extremely thermally stable and unreactive towards H2, CO, N2, cyclohexene and carbodiimide. It reacted with benzophenone, azobenzene, phenyl acetylene, CO2 and CS2. Reaction with 1-adamantyl azide led to reductive coupling and formation of an N6-chain. The azide reagent also inserted in the Cp*-Be bond. The inertness of 1 is likely due to bulky ligands protecting the Mg-Be unit.

Dialumene as a Dimeric or Monomeric Al Synthon for C-F Activation in Monofluorobenzene

The activation of C-F bonds has long been regarded as the subject of research in organometallic chemistry, given their synthetic relevance and the fact that fluorine is the most abundant halogen in the Earth's crust. However, C-F bond activation remains a largely unsolved challenge due to the high bond dissociation energies, which was historically dominated by transition metal complexes. Main group elements that can cleave unactivated monofluorobenzene are still quite rare and restricted to s-block complexes with a biphilic nature. Herein, we demonstrate an Al-mediated activation of monofluorobenzene using a neutral dialumene, allowing for the synthesis of the formal oxidative addition products at either double or single aluminum centers. This neutral dialumene system introduces a novel methodology for C-F bond activation based on formal oxidative addition and reductive elimination processes around the two aluminum centers, as demonstrated by combined experimental and computational studies. A "masked" alumylene was unprecedentedly synthesized to prove the proposed reductive elimination pathway. Furthermore, the synthetic utility is highlighted by the functionalization of the resulting aryl-aluminum compounds.

Synthesis, Isolation, and Reactivity Studies of 'Naked' Acyclic Gallyl and Indyl Anions

By exploiting the electronic capabilities of the N-heterocyclic boryloxy (NHBO) ligand, we have synthesized "naked" acyclic gallyl [Ga{OB(NDippCH)2}2]- and indyl [In{OB(NDippCH)2}2]- anions (as their [K(2.2.2-crypt)]+ salts) through K+ abstraction from [KGa{OB(NDippCH)2}2] and [KIn{OB(NDippCH)2}2] using 2.2.2-crypt. These systems represent the first O-ligated gallyl/indyl systems, are ultimately accessed from cyclopentadienyl GaI/InI precursors by substitution chemistry, and display nucleophilic reactivity which is strongly influenced by the presence (or otherwise) of the K+ counterion.

Mercury-Group 13 Metal Covalent Bonds: A Systematic Comparison of Aluminyl, Gallyl and Indyl Metallo-ligands

Bimetallic compounds containing direct metal-group 13 element bonds have been shown to display unprecedented patterns of cooperative reactivity towards small molecules, which can be influenced by the identity of the group 13 element. In this context, we present here a systematic appraisal of group 13 metallo-ligands of the type [(NON)E]- (NON=4,5-bis(2,6-diisopropylanilido)-2,7-di-tert-butyl-9,9-dimethylxanthene) for E=Al, Ga and In, through a comparison of structural and spectroscopic parameters associated with the trans L or X ligands in linear d10 complexes of the types LM{E(NON)} and XM'{E(NON)}. These studies are facilitated by convenient syntheses (from the In(I) precursor, InCp) of the potassium indyl species [{K(NON)In}⋅KCp]n (1) and [(18-crown-6)2K2Cp] [(NON)In] (1'), and lead to the first structural characterisation of Ag-In and Hg-E (E=Al, In) covalent bonds. The resulting structural, spectroscopic and quantum chemical probes of Ag/Hg complexes are consistent with markedly stronger σ-donor capabilities of the aluminyl ligand, [(NON)Al]-, over its gallium and indium counterparts.

Bis(Aluminyl)Magnesium: A Source of Nucleophilic or Radical Aluminium-Centred Reactivity

The homoleptic magnesium bis(aluminyl) compound Mg[Al(NON)]2 (NON=4,5-bis(2,6-diisopropylanilido)-2,7-di-tert-butyl-9,9-dimethylxanthene) can be accessed from K2[Al(NON)]2 and MgI2 and shown to possess a non-linear geometry (∠Al-Mg-Al=164.8(1)°) primarily due to the influence of dispersion interactions. This compound acts a four-electron reservoir in the reductive de-fluorination of SF6, and reacts thermally with polar substrates such as MeI via nucleophilic attack through aluminium, consistent with the QT-AIM charges calculated for the metal centres, and a formal description as a Al(I)-Mg(II)-Al(I) trimetallic. On the other hand, under photolytic activation, the reaction with 1,5-cyclooctadiene leads to the stereo-selective generation of transannular cycloaddition products consistent with radical based chemistry, emphasizing the covalent nature of the Mg-Al bonds and a description as a Al(II)-Mg(0)-Al(II) synthon. Consistently, photolysis of Mg[Al(NON)]2 in hexane in the absence of COD generates [Al(NON)]2 together with magnesium metal.

Reversible [4 + 1] Cycloaddition of Arenes by a "Naked" Acyclic Aluminyl Compound

The large steric profile of the N-heterocyclic boryloxy ligand, -OB(NDippCH)2, and its ability to stabilize the metal-centered HOMO, are exploited in the synthesis of the first example of a "naked" acyclic aluminyl complex, [K(2.2.2-crypt)][Al{OB(NDippCH)2}2]. This system, which is formed by substitution at AlI (rather than reduction of AlIII), represents the first O-ligated aluminyl compound and is shown to be capable of hitherto unprecedented reversible single-site [4 + 1] cycloaddition of benzene. This chemistry and the unusual regioselectivity of the related cycloaddition of anthracene are shown to be highly dependent on the availability (or otherwise) of the K+ countercation.

Recent advances in the chemistry of isolable carbene analogues with group 13-15 elements

Carbenes (R2C:), compounds with a divalent carbon atom containing only six valence shell electrons, have evolved into a broader class with the replacement of the carbene carbon or the RC moiety with main group elements, leading to the creation of main group carbene analogues. These analogues, mirroring the electronic structure of carbenes (a lone pair of electrons and an empty orbital), demonstrate unique reactivity. Over the last three decades, this area has seen substantial advancements, paralleling the innovations in carbene chemistry. Recent studies have revealed a spectrum of unique carbene analogues, such as monocoordinate aluminylenes, nitrenes, and bismuthinidenes, notable for their extraordinary properties and diverse reactivity, offering promising applications in small molecule activation. This review delves into the isolable main group carbene analogues that are in the forefront from 2010 and beyond, spanning elements from group 13 (B, Al, Ga, In, and Tl), group 14 (Si, Ge, Sn, and Pb) and group 15 (N, P, As, Sb, and Bi). Specifically, this review focuses on the potential amphiphilic species that possess both lone pairs of electrons and vacant orbitals. We detail their comprehensive synthesis and stabilization strategies, outlining the reactivity arising from their distinct structural characteristics.

Access to a peri-Annulated Aluminium Compound via C-H Bond Activation by a Cyclic Bis-Aluminylene

Carbocyclic aluminium halides [(ADC)AlX2]2 (2-X) (X=F, Cl, and I) based on an anionic dicarbene (ADC=PhC{N(Dipp)C}2, Dipp = 2,6-iPr2C6H3) framework are prepared as crystalline solids by dehydrohalogenations of the alane [(ADC)AlH2]2 (1). KC8 reduction of 2-I affords the peri-annulated Al(III) compound [(ADCH)AlH]2 (4) (ADCH=PhC{N(Dipp)C2(DippH)N}, DippH=2-iPr,6-(Me2C)C6H3)) as a colorless crystalline solid in 76 % yield. The formation of 4 suggests intramolecular insertion of the putative bis-aluminylene species [(ADC)Al]2 (3) into the methine C-H bond of HCMe2 group. Calculations predict singlet ground state for 3, while the conversion of 3 into 4 is thermodynamically favored by 61 kcal/mol. Compounds 2-F, 2-Cl, 2-I, and 4 have been characterized by NMR spectroscopy and their solid-state molecular structures have been established by single crystal X-ray diffraction.

Alumanyl-Samarium(II): Synthesis, Characterization, and Reactivity Studies

Metal-metal bonded species involving lanthanides are intriguing but rare. The recently reported salt metathesis reaction of an Al anion and SmI2(thf)2 yields novel heterometallic compound possessing two distinctive Al-Sm bonds. Although the Al-Sm bonds were considerably long [3.518(1) and 3.543(1) Å], DFT calculations indicated polar character of the Alδ--Smδ+ bonds. This is the first example of lanthanide species containing X-type Al ligands. Reactivity studies have demonstrated that the introduction of Sm(II) produces unique reactivity. The reaction with carbodiimide led to an insertion of carbodiimide into the Al-Sm bonds and reductive coupling of carbodiimide to create an oxalamidinate moiety, facilitated by Sm(II). Exposure of the Al-Sm-Al complex toward ethylene furnished a Sm(II) salt of anionic aluminacyclopropane that was spontaneously isomerized to a 1,4-dialuminacyclohexane derivative. The important role of Sm(II) to facilitate the ring expansion through an alkyl-relay mechanism was elucidated by DFT calculations.

Mechanochemical Synthesis of Non-Solvated Dialkylalumanyl Anion and XPS Characterization of Al(I) and Al(II) Species

A non-solvated alkyl-substituted Al(I) anion dimer was synthesized by a reduction of haloalumane precursor using a mechanochemical method. The crystallographic and theoretical analysis revealed its structure and electronic properties. Experimental XPS analysis of the Al(I) anions with reference compounds revealed the lower Al 2p binding energy corresponds to the lower oxidation state of Al species. It should be emphasized that the experimentally obtained XPS binding energies were reproduced by delta SCF calculations and were linearly correlated with NPA charges and 2p orbital energies.

Synthesis and investigation of novel boron- and magnesium-doped YAG:Ce and LuAG:Ce phosphor ceramics

YAG:Ce and LuAG:Ce ceramics are widely used as scintillator materials that convert high-energy radiation into visible light. For the practical application of such compounds, short decay times are a necessity. One way of shortening the existing decay times even more is to change the local environment of emitting ions by means of doping the matrix with additional elements, for example, boron or magnesium. Furthermore, boron ions also can help absorb gamma rays more efficiently, therefore improving overall applicability. Due to the aforementioned reasons, YAG and LuAG ceramics doped with cerium, boron, and magnesium were synthesized. Initial amorphous powders have been obtained by means of sol-gel synthesis and pressed into pellets under isostatic pressure and finally calcinated to form crystalline ceramics. The effects of boron and magnesium doping on the morphological, structural, and luminescence properties were investigated. The key results showed that doping with boron has indeed shortened the decay times of the garnet pellets. Overall, boron doping of ceramics is a relatively new research area; however, it is rather promising as it helps both to improve the luminescence properties and to increase particle growth rate.

Reversible Oxidative Addition of Nonactivated C-H Bonds to Structurally Constrained Phosphenium Ions

A series of structurally constrained phosphenium ions based on pyridinylmethylamidophenolate scaffolds are shown to undergo P(III)/P(V) oxidative addition with C-H bonds of alkynes, alkenes, and arenes. Nonactivated substrates such as benzene, toluene, and deactivated chlorobenzene are phosphorylated in quantitative yields. Computational and spectroscopic studies suggest a low-barrier isomerization from a bent to a T-shaped isomer that initiates a phosphorus-ligand-cooperative pathway and subsequent ring-chain tautomerism. Remarkably, C-H bond activations occur reversibly, allowing for reductive elimination back to P(III) at elevated temperatures or the exchange with other substrates.

Main group metal-mediated strategies for C-H and C-F bond activation and functionalisation of fluoroarenes

With fluoroaromatic compounds increasingly employed as scaffolds in agrochemicals and active pharmaceutical ingredients, the development of methods which facilitate regioselective functionalisation of their C-H and C-F bonds is a frontier of modern synthesis. Along with classical lithiation and nucleophilic aromatic substitution protocols, the vast majority of research efforts have focused on transition metal-mediated transformations enabled by the redox versatilities of these systems. Breaking new ground in this area, recent advances in main group metal chemistry have delineated unique ways in which s-block, Al, Ga and Zn metal complexes can activate this important type of fluorinated molecule. Underpinned by chemical cooperativity, these advances include either the use of heterobimetallic complexes where the combined effect of two metals within a single ligand set enables regioselective low polarity C-H metalation; or the use of novel low valent main group metal complexes supported by special stabilising ligands to induce C-F bond activations. Merging these two different approaches, this Perspective provides an overview of the emerging concept of main-group metal mediated C-H/C-F functionalisation of fluoroarenes. Showcasing the untapped potential that these systems can offer in these processes; focus is placed on how special chemical cooperation is established and how the trapping of key reaction intermediates can inform mechanistic understanding.

Dearomatization of C6 Aromatic Hydrocarbons by Main Group Complexes

The dearomatization reaction is a powerful method for transformation of simple aromatic compounds to unique chemical architectures rapidly in synthetic chemistry. Over the past decades, the chemistry in this field has evolved significantly and various important organic compounds such as crucial bioactive molecules have been synthesized through dearomatization. In general, photochemical conditions or assistance by transition metals are required for dearomatization of rigid arenes. Recently, main-group elements, especially naturally abundant elements in the Earth's crust, have attracted attention as they have low toxicity and are cost-effective compared to the late transition metals. In recent decades, a variety of low-valent main-group molecules, which enable the activation of stable aromatic compounds under mild conditions, have been developed. This minireview highlights the developments in the chemistry of dearomatization of C6 aromatic hydrocarbons by main-group compounds leading to the formation of seven-membered EC6 (E=main-group elements) ring or cycloaddition products.

Seven-Membered Cyclic Diamidoalumanyls of Heavier Alkali Metals: Structures and C-H Activation of Arenes

Like the previously reported potassium-based system, rubidium and cesium reduction of [{SiNDipp}AlI] ({SiNDipp} = {CH2SiMe2NDipp}2) with the heavier alkali metals [M = Rb and Cs] provides dimeric group 1 alumanyl derivatives, [{SiNDipp}AlM]2. In contrast, similar treatment with sodium results in over-reduction and incorporation of a formal equivalent of [{SiNDipp}Na2] into the resultant sodium alumanyl species. The dimeric K, Rb, and Cs compounds display a variable efficacy toward the C-H oxidative addition of arene C-H bonds at elevated temperatures (Cs > Rb > K, 110 °C) to yield (hydrido)(organo)aluminate species. Consistent with the synthetic experimental observations, computational (DFT) assessment of the benzene C-H activation indicates that rate-determining attack of the Al(I) nucleophile within the dimeric species is facilitated by π-engagement of the arene with the electrophilic M+ cation, which becomes increasingly favorable as group 1 is descended.

Aluminum-Boron Bond Formation by Boron Ester Oxidative Addition at an Alumanyl Anion

The potassium diamidoalumanyl, [K{Al(SiNDipp)}]2 (SiNDipp = {CH2SiMe2NDipp}2), reacts with the terminal B-O bonds of pinacolato boron esters, ROBpin (R = Me, i-Pr), and B(OMe)3 to provide potsassium (alkoxy)borylaluminate derivatives, [K{Al(SiNDipp)(OR)(Bpin)}]n (R = Me, n = 2; R = i-Pr, n = ∞) and [K{Al(SiNDipp)(OMe)(B(OMe)2)}]∞, comprising Al-B σ bonds. An initial assay of the reactivity of these species with the heteroallene molecules, N,N'-diisopropylcarbodiimide and CO2, highlights the kinetic inaccessibility of their Al-B bonds; only decomposition at high temperature is observed with the carbodiimide, whereas CO2 preferentially inserts into the Al-O bond of [K{Al(SiNDipp)(OMe)(Bpin)}]2 to provide a dimeric methyl carbonate species. Treatment of the acyclic dimethoxyboryl species, however, successfully liberates a terminal alumaboronic ester featuring trigonal N2Al-BO2 coordination environments at both boron and aluminum.

Three-Membered Aluminacycles

Three-membered-ring scaffolds of carbocycles, namely, cyclopropanes and cyclopropenes, are ubiquitous in natural products and pharmaceutical molecules. These molecules exhibit a peculiar reactivity, and their applications as synthetic intermediates and versatile building blocks in organic synthesis have been extensively studied over the past century. The incorporation of heteroatoms into three-membered cyclic structures has attracted significant attention, reflecting fundamental differences in their electronic/geometric structures and reactivities compared to their carbon congeners and their associated potential for exploitation in applications. Recently, the chemistry of low-valent aluminum species, alumylenes, dialumenes, and aluminyl anions, has dramatically developed, which has allowed access to hitherto unprecedented aluminacycles. This Perspective focuses upon advances in the chemistry of three-membered aluminacycles, including their synthetic protocols, spectroscopic and structural properties, and reactivity toward various substrates and small molecules.

Evidence of AlII Radical Addition to Benzene

Electrophilic Al^III species have long dominated the aluminum reactivity towards arenes. Recently, nucleophilic low-valent Al^I aluminyl anions have showcased oxidative additions towards arenes C-C and/or C-H bonds. Herein, we communicate compelling evidence of an Al^II radical addition reaction to the benzene ring. The electron reduction of a ligand stabilized precursor with KC₈ in benzene furnishes a double addition to the benzene ring instead of a C-H bond activation, producing the corresponding cyclohexa-1,3(orl,4)-dienes as Birch-type reduction product. X-ray crystallographic analysis, EPR spectroscopy, and DFT results suggest this reactivity proceeds through a stable Al^II radical intermediate, whose stability is a consequence of a rigid scaffold in combination with strong steric protection.

Inducing Nucleophilic Reactivity at Beryllium with an Aluminyl Ligand

The reactions of anionic aluminium or gallium nucleophiles {K[E(NON)]}₂ (E = Al, 1; Ga, 2; NON = 4,5-bis(2,6-diisopropylanilido)-2,7-ditert-butyl-9,9-dimethylxanthene) with beryllocene (BeCp₂) led to the displacement of one cyclopentadienyl ligand at beryllium and the formation of compounds containing Be-Al or Be-Ga bonds (NON)EBeCp (E = Al, 3; Ga, 4). The Be-Al bond in the beryllium-aluminyl complex [2.310(4) Å] is much shorter than that found in the small number of previous examples [2.368(2) to 2.432(6) Å], and quantum chemical calculations suggest the existence of a non-nuclear attractor (NNA) for the Be-Al interaction. This represents the first example of a NNA for a heteroatomic interaction in an isolated molecular complex. As a result of this unusual electronic structure and the similarity in the Pauling electronegativities of beryllium and aluminium, the charge at the beryllium center (+1.39) in 3 is calculated to be less positive than that of the aluminium center (+1.88). This calculated charge distribution suggests the possibility for nucleophilic behavior at beryllium and correlates with the observed reactivity of the beryllium-aluminyl complex with N,N'-diisopropylcarbodiimide─the electrophilic carbon center of the carbodiimide undergoes nucleophilic attack by beryllium, thereby yielding a beryllium-diaminocarbene complex.

Probing a General Strategy to Break the C-C Bond of Benzene by a Cyclic (Alkyl)(Amino)Aluminyl Anion

The oxidative addition of C-C bonds in aromatic hydrocarbons by low valent main group species has attracted considerable attention from both theoretical and experimental chemists due to the big challenge in breaking their aromaticity. Herein, a general strategy to break the C-C bonds in benzene by cyclic (alkyl)(amino)aluminyl anion is demonstrated via density functional theory (DFT) calculations. The results suggest that the activation of the C-C bond of benzene by this anion is both kinetically and thermodynamically unfavorable whereas introducing electron-withdrawing groups makes such C-C bond activation becomes favorable both kinetically and thermodynamically. Such a sharp change on the kinetics and thermodynamics could be rationalized by the frontier molecular orbital theory by decreasing the lowest unoccupied molecular orbitals of the mono- and disubstituted benzenes. Aromaticity is found to stabilize the transition state for the ring open step. All these findings can help develop the chemistry of small-molecule activation.

High-Level Coupled-Cluster Study on Substituent Effects in H2 Activation by Low-Valent Aluminyl Anions

The synthesis of novel aluminyl anion complexes has been well exploited in recent years. Moreover, the elucidation of the structure and reactivity of these complexes opens the path toward a new understanding of low-valent aluminum complexes and their chemistry. This work computationally treats the substituent effect on aluminyl anions to discover suitable alternatives for H₂ activation at a high level of theory utilizing coupled-cluster techniques extrapolated to the complete basis set. The results reveal that the simplest AlH₂^- system is the most reactive toward the activation of H₂, but due to the low steric demand, severe difficulty in the stabilization of this system makes its use nonviable. However, the results indicate that, in principle, aluminyl systems with -C, -CN, -NC, and -N chelating centers would be the best choices of ligand toward the activation of molecular hydrogen by taking care of suitable steric demand to prevent dimerization of the catalysts. Furthermore, computations show that monosubstitution (besides -H) in aluminyl anions is preferred over disubstitution. So our predictions show that bidentate ligands may yield less reactive aluminyl anions to activate H₂ than monodentate ones.

Frustrated Lewis pair-ligated tetrelenes

The reactivity of [PB{SiX₂}] (X = Cl, Br; PB = 1,2-ⁱPr₂(C₆H₄)BCy₂; E = Si, Ge) adducts is described, with an initial focus on reduction attempts to access [PB{E}]_x species; however, in all cases only free PB ligand was formed as the soluble product. Moreover, computations were performed to evaluate the energy penalty associated with EX₂ dissociation from the PB chelates. Moving up the periodic table, the formal methylene adduct [PB{CH₂}] was isolated and its reactivity was compared with its heavier element congeners of [PB{EH₂}]. We also introduce new phosphine-borane frustrated Lewis pair (FLP) chelates and explore preliminary coordination chemistry with these ligands.

The emerging chemistry of the aluminyl anion

The chemistry of low valent p-block metal complexes continues to elicit interest in the research community, demonstrating reactivity that replicates and in some cases exceeds that of their more widely studied d-block metal counterparts. The introduction of the first aluminyl anion, a complex containing a formally anionic Al(I) centre charge balanced by an alkali metal (AM) cation, has established a platform for a new area of chemical research. The chemistry displayed by aluminyl compounds is expanding rapidly, with examples of reactivity towards a diverse range of small molecules and functional groups now reported in the literature. Herein we present an account of the structure and reactivity of the growing family of aluminyl compounds. In this context we examine the structural relationships between the aluminyl anion and the AM cations, which now include examples of AM = Li, Na, K, Rb and Cs. We report on the ability of these compounds to engage in bond-breaking and bond-forming reactions, which is leading towards their application as useful reagents in chemical synthesis. Furthermore we discuss the chemistry of bimetallic complexes containing direct Al-M bonds (M = Li, Na, K, Mg, Ca, Cu, Ag, Au, Zn) and compounds with Al-E multiple bonds (E = NR, CR₂, O, S, Se, Te), where both classes of compound are derived directly from aluminyl anions.

An Aluminium Imide as a Transfer Agent for the [NR]2- Function via Metathesis Chemistry

The reactions of a terminal aluminium imide with a range of oxygen-containing substrates have been probed with a view to developing its use as a novel main group transfer agent for the [NR]^2- fragment. We demonstrate transfer of the imide moiety to [N₂ ], [CO] and [Ph(H)C] units driven thermodynamically by Al-O bond formation. N₂ O reacts rapidly to generate the organoazide DippN₃ (Dipp=2,6-ⁱ Pr₂ C₆ H₃ ), while CO₂ (under dilute reaction conditions) yields the corresponding isocyanate, DippNCO. Mechanistic studies, using both experimental and quantum chemical techniques, identify a carbamate complex K₂ [(NON)Al-{κ² -(N,O)-N(Dipp)CO₂ }]₂ (formed via [2+2] cycloaddition) as an intermediate in the formation of DippNCO, and also in an alternative reaction leading to the generation of the amino-dicarboxylate complex K₂ [(NON)Al{κ² -(O,O')-(O₂ C)₂ N-(Dipp)}] (via the take-up of a second equivalent of CO₂ ). In the case of benzaldehyde, a similar [2+2] cycloaddition process generates the metallacyclic hemi-aminal complex, K_n [(NON)Al{κ² -(N,O)-(N(Dipp)C(Ph)(H)O}]_n . Extrusion of the imine, PhC(H)NDipp, via cyclo-reversion is disfavoured thermally, due to the high energy of the putative aluminium oxide co-product, K₂ [(NON)Al(O)]₂ . However, addition of CO₂ allows the imine to be released, driven by the formation of the thermodynamically more stable aluminium carbonate co-product, K₂ [(NON)Al(κ² -(O,O')-CO₃ )]₂ .

Cationic dialanes with fluxional π-bridged cyclopentadienyl ligands

Unique π-cyclopentadienyl bridged dialanes are synthesized as complex salts with aluminate anions by comproportionation of aluminocenium cations [Al^III(Cp)(Cp*)]⁺/[Al^IIICp₂]⁺ with [(Al^ICp*)₄]. Very short Al-Al bond lengths occur in positively charged Al₂⁴⁺ fragments. Intriguingly, the prepared asymmetric dialane shows a unique fluxional coordination of the cyclopentadienyl ligands.

Al-Sc Bonded Complexes: Synthesis, Structure, and Reaction with Benzene in the Presence of Alkyl Halide

An alumanyl anion possessing N,N'-bis(2,6-diisopropylphenyl)-1,3-propanediamine ligand was synthesized and characterized. Transmetalation of this Al anion with diaminoscandium chloride precursors afforded the corresponding Al-Sc complexes possessing an unprecedented Al-Sc bond. The Al-Sc[N(SiMe₃)₂] complex underwent intramolecular C-H cleavage to form a bridged dinuclear complex with μ-hydrido and μ-methylene ligands. The Al-Sc(NⁱPr₂)₂ complex reacted with benzene in the presence of alkyl bromide to furnish a 1,4-dialuminated cyclohexadiene product with a concomitant formation of the alkyl-alkyl coupled product. Although the latter product seems to form through the radical mechanism, DFT calculations revealed an ionic mechanism involving bimetallic reaction pathways to react with alkyl bromide and benzene, which provides new insight into the chemistry of metal-metal bonded compounds.

Synthesis, Characterization, and Structural Analysis of [Al(NONDipp)(H)(SiH2Ph)] ( = Li, Na, K, Rb, Cs) Compounds, Made Via Oxidative Addition of Phenylsilane to Alkali Metal Aluminyls

We report the oxidative addition of phenylsilane to the complete series of alkali metal (AM) aluminyls [AM{Al(NON^Dipp)}]₂ (AM = Li, Na, K, Rb, and Cs). Crystalline products (1-AM) have been isolated as ether or THF adducts, [AM(L)_n][Al(NON^Dipp)(H)(SiH₂Ph)] (AM = Li, Na, K, Rb, L = Et₂O, n = 1; AM = Cs, L = THF, n = 2). Further to this series, the novel rubidium rubidiate, [{Rb(THF)₄}₂(Rb{Al(NON^Dipp)(H)(SiH₂Ph)}₂)]⁺ [Rb{Al(NON^Dipp)(H)(SiH₂Ph)}₂]^-, was isolated during an attempted recrystallization of Rb[Al(NON^Dipp)(H)(SiH₂Ph)] from a hexane/THF mixture. Structural and spectroscopic characterizations of the series 1-AM confirm the presence of μ-hydrides that bridge the aluminum and alkali metals (AM), with multiple stabilizing AM···π(arene) interactions to either the Dipp- or Ph-substituents. These products form a complete series of soluble, alkali metal (hydrido) aluminates that present a platform for further reactivity studies.

Unravelling the Potential of Ylides in Stabilizing Low-Valent Group 13 Compounds: Theoretical Predictions of Stable, Five-Membered Group 13 (Aluminum and Gallium) Carbenoids Capable of Small-Molecule Activation

Computational investigations provide evidence toward the remarkable ability of strongly electron-donating ylidic functionalities in stabilizing singlet group 13 carbenoids with promising ligand properties. All of the proposed carbenoids are found to be considerably nucleophilic and possess significant singlet-triplet energy separation values. The calculated activation barriers and reaction free energies obtained for the cleavage of different enthalpically strong bonds by these carbenoids are found to be either comparable to or lower than those of the experimentally evaluated aluminum and gallium carbenoids, thereby indicating their potential in small-molecule activation.

Stepwise reduction of a base-stabilised ferrocenyl aluminium(iii) dihalide for the synthesis of structurally-diverse dialane species

We report the reduction of bulky ferrocenyl-based NHC-stabilised aluminium(iii) diiodide [Fc*(NHC)AlI2] (Fc* = 2,5-bis(3,5-di-tert-butylphenyl)-1-ferrocenyl) in different hydrocarbon solvents (hexane, benzene, toluene, and p-xylene), which results in different outcomes. Reduction in hexane with an equivalent amount of KC8 generates the diiododialane [(Fc*(NHC)AlI)2], whereas complete reduction in hexane leads to an unusual C-H activation at an N-Me group of one NHC unit. In contrast, reaction in aromatic solvents result in hitherto unknown Birch-type reductions of the corresponding solvent molecules by transient aluminium radicals of the type [LAlR2]˙, which is ultimately bound to two aluminium centers.

Synthesis of a low-valent Al4+ cluster cation salt

Low-valent aluminium compounds are very reactive main-group species and have therefore been widely investigated. Since the isolation of a stable molecular Al(I) compound in 1991, [(AlCp*)₄] (Cp* = [C₅Me₅]^-), a variety of highly reactive neutral or anionic low-valent aluminium complexes have been developed. By contrast, their cationic counterparts have remained difficult to access. Here, we report the synthesis of [Al(AlCp*)₃]⁺[Al(OR^F)₄]^- (R^F = C(CF₃)₃) through a simple metathesis reaction between [(AlCp*)₄] and Li[Al(OR^F)₄]. Unexpectedly, the [Al(AlCp*)₃]⁺ salt forms a dimer in the solid state and concentrated solutions. Addition of Lewis bases results in monomerization and coordination to the unique formal Al⁺ atom, giving [(L)_xAl(AlCp*)₃]⁺ salts where L is hexaphenylcarbodiphosphorane (x = 1), tetramethylethylenediamine (x = 1) or 4-dimethylaminopyridine (x = 3). The Al⁺-Al_Cp* bonds in the resulting [(L)_xAl(AlCp*)₃]⁺ cluster cations can be finely tuned between very strong (with no ligand L) to very weak and approaching isolated [Al(L)₃]⁺ ions (when L is dimethylaminopyridine).

Alkali metal influences in aluminyl complexes

The previously reported potassium aluminyl complex [(BDI-H)Al^-K⁺]₂ was converted in Li⁺ or Na⁺ salts by a salt metathesis reaction with Li(BPh₄) or Na(BPh₄), respectively; BDI-H = dianionic [(DIPP)N-C(Me)C(H)-C(CH₂)-N(DIPP)^2-] and DIPP = 2,6-diisopropylphenyl. The Rb and Cs aluminyl complexes were obtained by reaction of (BDI)Al with RbC₈ or CsC₈; BDI = HC[C(Me)N(DIPP)]₂. Crystal structures of two monomers, (BDI-H)Al^-Li⁺·(Et₂O)₂ and (BDI-H)Al^-Na⁺·(Et₂O)(TMEDA), and four dimers [(BDI-H)Al^-M⁺]₂ (M = Li, Na, Rb, Cs) are discussed. Lewis base-free dimers [(BDI-H)Al^-M⁺]₂ crystallize either as slipped dimers (Li⁺, Na⁺) in which each Al center features only one Al-M contact or as a symmetric dimer (K⁺, Rb⁺, Cs⁺) in which the cation bridges both Al centers. The dimer with the largest cation (Cs⁺) shows Cs⋯CH₂C interactions between dimers, resulting in a coordination polymer. AIM and charge analysis reveal highly ionic Al-M bonds with strong polarization of the Al lone-pair towards the smaller cation Li⁺ and Na⁺. The Al-M bonds become weaker from Li to Cs. Calculated dimerization energies suggest that in apolar solvents only complexes with the heavier metals Rb and Cs may be in a monomer-dimer equilibrium. This is confirmed by DOSY measurements in benzene. Dimeric aluminyl complexes with heavier alkali metals (K-Cs) react with benzene to give a double C-H activation in para-positions.

Coordination and Homologation of CO at Al(I): Mechanism and Chain Growth, Branching, Isomerization, and Reduction

Homologation of carbon monoxide is central to the heterogeneous Fischer-Tropsch process for the production of hydrocarbon fuels. C-C bond formation has been modeled by homogeneous systems, with [CnOn]2- fragments (n = 2-6) formed by two-electron reduction being commonly encountered. Here, we show that four- or six-electron reduction of CO can be accomplished by the use of anionic aluminum(I) ("aluminyl") compounds to give both topologically linear and branched C4/C6 chains. We show that the mechanism for homologation relies on the highly electron-rich nature of the aluminyl reagent and on an unusual mode of interaction of the CO molecule, which behaves primarily as a Z-type ligand in initial adduct formation. The formation of [C6O6]4- from [C4O4]4- shows for the first time a solution-phase CO homologation process that brings about chain branching via complete C-O bond cleavage, while a comparison of the linear [C4O4]4- system with the [C4O4]6- congener formed under more reducing conditions models the net conversion of C-O bonds to C-C bonds in the presence of additional reductants.

Diverse reactivity of an Al(I)-centred anion towards ketones

The reactivity of a seven-membered cyclic potassium diamidoalumanyl toward a variety of ketone small molecules has been assessed. Whilst acetophenone generates an aluminium pinacolate derivative, reductive C-C coupling is induced between the ketyl and ortho-carbon centres of two equivalents of benzophenone. In contrast, whereas oxidative addition of an enolisable proton is observed with 2,4-dimethyl-3-pentanone, 2,2,4,4-tetramethyl-3-pentanone undergoes an unprecedented hydroalumination process, where the reducing hydride may be traced to intramolecular oxidative addition of a (sp³)C-H bond.

Reactivity of Unsupported Transition Metal-Aluminyl Complexes: A Nucleophilic TM-Al Bond

Despite the long history of research in transition metal (TM) complexes, the study of TM-aluminyl complexes is still in its early stage of development. It is expected that the presence of an electropositive Al donor atom would open up new possibilities in TM complex reactivity, and indeed TM-aluminyl has shown an early sign of success in small-molecule activation. On the other hand, the existing reports on TM-aluminyl reactivity are often explained to readers with different understanding on individual cases, and a general picture of TM-aluminyl reactivity is still not available. In this work, we have attempted to provide a systematic picture to explain some early explorations in this field, specifically a series of recently reported heteroallene insertion reactions involving unsupported TM-aluminyl complexes. Through density functional theory calculations of a number of TM-aluminyl complexes, covering both Au and Cu centers, we found that their reactivity against heteroallenes (including CO₂ and carbodiimides) is mostly based on the strong nucleophilicity of the TM-Al σ-bond.

Unraveling differences in aluminyl and carbene coordination chemistry: bonding in gold complexes and reactivity with carbon dioxide

The electronic properties of aluminyl anions have been reported to be strictly related to those of carbenes, which are well-known to be easily tunable via selected structural modifications imposed on their backbone. Since peculiar reactivity of gold-aluminyl complexes towards carbon dioxide has been reported, leading to insertion of CO2 into the Au-Al bond, in this work the electronic structure and reactivity of Au-Al complexes with different aluminyl scaffolds have been systematically studied and compared to carbene analogues. The analyses reveal that, instead, aluminyls and carbenes display a very different behavior when bound to gold, with the aluminyls forming an electron-sharing and weakly polarized Au-Al bond, which turns out to be poorly modulated by structural modifications of the ligand. The reactivity of gold-aluminyl complexes towards CO2 shows, both qualitatively and quantitatively, similar reaction mechanisms, reflecting the scarce tunability of their electronic structure and bond nature. This work provides further insights and perspectives on the properties of the aluminyl anions and their behavior as coordination ligands.

Oxidative Additions of C-F Bonds to the Silanide Anion [Si(C2 F5 )3 ]. Angew Chem Int Ed Engl 2022;61:e202116468. [PMID: 35107847 PMCID: PMC9310575 DOI: 10.1002/anie.202116468]

Compounds exhibiting main group elements in low oxidation states were found to mimic the reactivity of transition metal complexes. Like the latter, such main group species show a proclivity of changing their oxidation state as well as their coordination number by +2, therefore fulfilling the requirements for oxidative additions. Prominent examples of such main group compounds that undergo oxidative additions with organohalides R-X (R=alkyl, aryl, X=F, Cl, Br, I) are carbenes and their higher congeners. Aluminyl anions, which like carbenes and silylenes oxidatively add to strong σ-bonds in R-X species, have been recently discovered. We present the first anion based upon a Group 14 element, namely the tris(pentafluoroethyl)silanide anion, [Si(C2 F5 )3 ]- , which is capable of oxidative additions towards C-F bonds. This enables the isolation of non-chelated tetraorganofluorosilicate salts, which to the best of our knowledge had only been observed as reactive intermediates before.

Potassium Aluminyl Promoted Carbonylation of Ethene

The potassium aluminyl [K{Al(NON^Dipp)}]₂ ([NON^Dipp]²⁻=[O{SiMe₂NDipp}₂]²⁻, Dipp=2,6‐iPr₂C₆H₃) activates ethene towards carbonylation with CO under mild conditions. An isolated bis‐aluminacyclopropane compound reacted with CO via carbonylation of an Al−C bond, followed by an intramolecular hydrogen shift to form K₂[Al(NON^Dipp)(μ‐CH₂CH=CO‐1κ²C^1,3‐2κO)Al(NON^Dipp)Et]. Restricting the chemistry to a mono‐aluminium system allowed isolation of [Al(NON^Dipp)(CH₂CH₂CO‐κ²C^1,3)]⁻, which undergoes thermal isomerisation to form the [Al(NON^Dipp)(CH₂CH=CHO‐κ²C,O)]⁻ anion. DFT calculations highlight the stabilising influence of incorporated benzene at multiple steps in the reaction pathways.

Sigma/pi Bonding Preferences of Solvated Alkali-Metal Cations to Ditopic Arylmethyl Anions

Arylmethyl anions allow alkali-metals to bind in a σ-fashion to the lateral carbanionic centre or a π-fashion to the aryl ring or in between these extremities, with the trend towards π bonding increasing on descending group 1. Here we review known alkali metal structures of diphenylmethane, fluorene, 2-benzylpyridine and 4-benzylpyridine. Next, we synthesise Li, Na, K monomers of these diarylmethyls using polydentate donors PMDETA or Me6 TREN to remove competing oligomerizing interactions, studying the effect that two aromatic rings has on negative charge (de)localisation via NMR, X-ray crystallographic and DFT studies. Diphenylmethyl and fluorenyl anions maintain C(H)-M interactions regardless of alkali-metal, although the adjacent arene carbons engage in interactions with larger alkali-metals. Introducing a nitrogen atom into the ring (at the 2- or 4-position) encourages relocalisation of negative charge away from the deprotonated carbon and onto nitrogen. Phenyl(2-pyridyl)methyl moves from an enamide formation at one extremity (lithium) to an aza-allyl formation at the other extremity (potassium), while C- or N-coordination modes become energetically viable for Na and K phenyl(4-pyridyl)methyl complexes.

On the reactivity of Al-group 11 (Cu, Ag, Au) bonds

Reactions of the seven-membered heterocyclic potassium diamidoalumanyl, [K{Al(SiN^Dipp)}]₂ (SiN^Dipp = {CH₂SiMe₂NDipp}₂; Dipp = 2,6-di-isopropylphenyl), with a variety of Cu(I), Ag(I) and Au(I) chloride N-heterocyclic carbene (NHC) adducts are described. The resultant group 11-Al bonded derivatives have been characterised in solution by NMR spectroscopy and, in the case of [{SiN^Dipp}Al-Au(NHC^iPr)] (NHC^iPr = N,N'-di-isopropyl-4,5-dimethyl-2-ylidene), by single crystal X-ray diffraction. Although similar reactions of LAgCl and LAuCl, where L is a more basic cyclic alkyl amino carbene (CAAC), generally resulted in reduction of the group 11 cations to the base metals, X-ray analysis of [(^CyCAAC)AgAl(SiN^Dipp)] (^CyCAAC = 2-[2,6-bis(1-methylethyl)phenyl]-3,3-dimethyl-2-azaspiro[4.5]dec-1-ylidene) provides the first solid-state authentication of an Ag-Al σ bond. The reactivity of the NHC-supported Cu, Ag and Au alumanyl derivatives was assayed with the isoelectronic unsaturated small molecules, N,N'-di-isopropylcarbodiimide and CO₂. While these reactions generally provided products consistent with nucleophilic attack of the group 11 atom at the electrophilic heteroallene carbon centre, treatment of the NHC-supported copper and silver alumanyls with N,N'-di-isopropylcarbodiimide yielded less symmetric Cu-C and Ag-C-bonded isomers. In contrast to the previously described copper and silver alumanyl derivatives, [(NON)Al(O₂C)M(Pt-Bu₃)] (M = Cu or Ag; NON = 4,5-bis(2,6-di-isopropylanilido)-2,7-di-tert-butyl-9,9-dimethylxanthene), which were prone to facile CO extrusion and formation of carbonate derivatives, the NHC-supported dioxocarbene species, [(NHC^iPr)M(CO₂)Al(SiN^Dipp)] (M = Cu, Ag, Au), are all stable at room and moderately elevated temperatures. The stabilising role of the NHC co-ligand was, thus, assessed by preparation of the t-Bu₃P adducted copper-alumanyl, [(t-Bu₃P)CuAl(SiN^Dipp)]. Treatment of this latter compound, which was also structurally characterised by X-ray analysis, with both N,N'-di-isopropylcarbodiimide and CO₂ again provided smooth heteroallene insertion and formation of the relevant Cu-C-bonded products. Although both compounds were quite stable at room temperature, heating of [(t-Bu₃P)Cu(CO₂)Al(SiN^Dipp)] at 60 °C induced elimination of CO and formation of the analogous carbonate, [(t-Bu₃P)Cu(OCO₂)Al(SiN^Dipp)], which was identified by ¹³C and ³¹P NMR spectroscopy. Reflective of the more reliable nucleophilic behaviour of the gold centres in these group 11 alumanyls, computational (QTAIM and NBO) analysis highlighted a lower level of covalency of the Al-Au linkage in comparison to the analogous Al-Cu and Al-Ag interactions. Although substitution of the co-ligand significantly perturbs the charge distribution across the Cu-Al bond of [LCuAl(SiN^Dipp)] (L = NHC^iPr or t-Bu₃P), only a negligible difference is observed between the phosphine-coordinated copper systems derived from either the [SiN^Dipp]- or (NON)-based alumanyl ligands. Computational mapping of the reaction profiles arising from treatment of the various group 11 alumanyls with N,N'-di-isopropylcarbodiimide indicates that the observed formation of the Cu-N and Ag-N bound isomers do not provide the thermodynamic reaction outcome. In contrast, examination of the CO₂-derived reactions, and their potential toward CO extrusion and subsequent carbonate formation, implies that the identity of the co-ligand exerts a greater influence on this aspect of reactivity than the architecture of the diamidoalumanyl anion.

A Tetraorganyl-Alumaborane with An Al-B σ-Bond and Two Adjacent Lewis-Acidic Centers

A tetraorganyl-alumaborane (3) that contains an Al-B bond and twisted Al and B planes was synthesized and structurally characterized. UV-vis absorption spectroscopy, electrochemical measurement, and DFT calculations were employed to reveal the electronic properties of 3. The reactivity of 3 toward DMSO and CO was studied to demonstrate its deoxygenating abilities. On the basis of the results of the DFT calculations, a detailed reaction mechanism was developed, which highlighted the important role of the distinct Lewis acidity of the group-13 elements Al and B in 3.