A robust all-organic protective layer towards ultrahigh-rate and large-capacity Li metal anodes

Boosting stable lithium deposition via Li3N-Enriched inorganic SEI induced by a polycationic polymer layer

Lithium (Li) metal is a promising anode material for future high-energy rechargeable batteries due to its remarkable properties. Nevertheless, excess Li in traditional lithium metal anodes (LMAs) reduces the energy density of batteries and increases safety risks. Electrochemical pre-lithiation is an effective technique for regulating the lithium content of the anodes. However, Cu foil or other non-Li based substrates used for pre-lithiation often have inhomogeneous surfaces and high nucleation barrier, leading to uneven tip deposition of lithium metal and fragile SEI. Herein, we have designed an interfacial layer composed of nano-Si particles and cationic polymer (poly (diallyldimethylammonium chloride)) (denoted as Si@PDDA) to induce the formation of Li3N-rich inorganic SEI and regulate the homogeneous plating/stripping of lithium. The uniformly dispersed nano-Si particles can decrease the Li+ nucleation overpotential through alloying reaction with lithium. The surface of Si nano-particles modified by PDDA contains numerous cationic sites, providing an electrostatic shielding layer to seeding the growth of Li metal and inhibiting dendrites formation. More promisingly, PDDA adsorbs electrolyte anions while transporting Li+, significantly accelerating the decomposition kinetics of inorganic salts within the electrolyte. Therefore, a SEI film rich in Li3N was formed on the anodes, ensuring the excellent interfacial stability and electrochemical cycling performance of LMAs. The symmetrical cells exhibit a cycle life of 900 h at 1 mA cm-2. Moreover, the practical full cells operate at a low negative/positive (N/P) capacity ratio (∼3) for over 160 cycles.

A modified separator based on ternary mixed-oxide for stable lithium metal batteries

Li metal batteries (LMBs) are among the most promising options for next-generation secondary batteries under the rapidly growing demand for high-energy-density electrochemical energy storage. However, the implementation of LMBs are hindered by major obstacles such as dentritic Li deposition and low cycling Coulombic efficiency. A practical functional separator is developed in this study, which consists of a Lewis acidic mixed oxide of ZrO2-SiO2-Al2O3 as a functional coating with anion anchoring ability to modulate ion transport in the vicinity of the Li metal anode, delivering a high Li+ transference number of 0.88 in carbonate electrolytes that suppresses dendrite formation. The strong Lewis acid sites in ZrO2-SiO2-Al2O3 originate from coordinatively unsaturated Zr4+ ions, which immobilize anions and reduce their decomposition rate. This significantly improves the chemical stability of the electrolyte and induces a more stable solid electrolyte interphase layer. The modified separator enables an anode-free cell containing a high-loading LiNi0.8Co0.1Mn0.1O2 cathode to present stable charge and discharge cycling for 150 cycles at 0.5C. By effectively suppressing Li dendrite growth and supporting the long-term operation of anode-free LMBs, this study offers a novel approach to rationally design mixed oxides with high Lewis acidity for functional separators.

Molecular brush-based ultrathin polymer electrolytes with stable interfaces for high-voltage large-areal-capacity lithium metal batteries

Polymer electrolytes hold great promise for long-cycling lithium metal batteries, but their unsatisfactory ionic conductivities and unstable interfacial contacts with electrodes greatly limit their practical applications under high cut-off voltage and large areal capacity conditions. Herein, a super-structured multifunctional molecular brush, BC-g-P(CCMA-co-TFEMA) (BC = bacterial cellulose; CCMA = (2-oxo-1,3-dioxolan-4-yl) methyl methacrylate; TFEMA = 2,2,2-trifluoroethyl methacrylate), has been designed to develop an ultrathin polymer electrolyte with superior ionic conductivity and stable electrolyte/electrode interfaces. The cyclic carbonate group in CCMA can weaken the binding of solvents and anions with lithium ions, thereby enhancing ionic transport. Meanwhile, the fluorine-containing group in TFEMA is beneficial for simultaneously constructing LiF-rich electrolyte/anode and electrolyte/cathode interfaces with enhanced stability. Moreover, the robust BC backbone provides the polymer electrolyte with outstanding mechanical properties. With such polymer electrolytes, a remarkable capacity retention of 83% has been demonstrated for Li/LiFePO4 cells at 1C after 1000 cycles. Remarkably, the solid-state full cell with a high-loading LiNi0.8Mn0.1Co0.1O2 cathode delivers a high discharge specific capacity of 204 mA h g-1 for more than 400 cycles at a high cut-off voltage of 4.5 V. This work provides a novel design principle for advanced electrolytes of high-voltage and large-areal-capacity lithium metal batteries.

All-atom molecular dynamics simulations showing the dynamics of small organic molecules in water-solvated polyelectrolyte brush layers

Polyelectrolyte brushes can introduce functionality to surfaces and because of this, these brushes have been studied extensively. In many applications, these brushes are used in solutions that contain a variety of molecules. While the interaction between polyelectrolyte brushes and molecules has been studied via coarse-grained simulations and experiments, such interaction has not been studied in molecular detail. An understanding of interactions in such molecular detail may prove crucial in the design of future brush coatings that can enable desired adsorption of different organic and biological molecules. Therefore, we present a first all-atom molecular dynamics simulations study of poly(sodium acrylate) brushes in contact with a small organic molecule, γ-butyrolactone. Within this molecular framework, we study the interaction of this lactone molecule with the brush layer and study the ensuing absorption and dynamics of the lactone inside the brush layer. The lactone is found to prefer to remain in the bulk solution; however, when absorbed, lactone molecules are found to have significantly reduced mobilities as compared to that in the bulk solution and are able to massively influence the properties of the brush-entrapped water molecules. These findings provide unprecedented details about the absorption-driven changes to molecular structure and dynamics of the lactone molecules and the water molecules inside the brush layer and can only be uncovered by our all-atom MD simulations. Such explicit and atomistically-resolved information, taking into account the specific chemical nature of the interacting systems, is rare in the context of designing polymer and PE brush-based coatings. Thus, we anticipate that our findings will be crucial in the design of future brush coatings aimed at providing adsorption platforms for different organic and biomolecules.

Covalent Triazine Based Frameworks with Donor-Donor-π-Acceptor Structures for Dendrite-Free Lithium Metal Batteries

The appearance of disordered lithium dendrites and fragile solid electrolyte interfaces (SEI) significantly hinder the serviceability of lithium metal batteries. Herein, guided by theoretical predictions, a multi-component covalent triazine framework with partially electronegative channels (4C-TA0.5TF0.5-CTF) is incorporated as a protective layer to modulate the interface stability of the lithium metal batteries. Notably, the 4C-TA0.5TF0.5-CTF with optimized electronic structure at the molecular level by fine-tuning the local acceptor-donor functionalities not only enhances the intermolecular interaction thereby providing larger dipole moment and improved crystallinity and mechanical stress, but also facilitates the beneficial effect of lithiophilic sites (C-F bonds, triazine cores, C=N linkages and aromatic rings) to further regulate the migration of Li+ and achieve a uniform lithium deposition behavior as determined by various in-depth in/ex situ characterizations. Due to the synergistic effect of multi-component organic functionalities, the 4C-TA0.5TF0.5-CTF modified full cells perform significantly better than the common two/three-component 2C-TA-CTF and 3C-TF-CTF electrodes, delivering an excellent capacity of 116.3 mAh g-1 (capacity retention ratio: 86.8 %) after 1000 cycles at 5 C and improved rate capability. This work lays a platform for the prospective molecular design of improved organic framework relative artificial SEI for highly stable lithium metal batteries.

Lithium metal based battery systems with ultra-high energy density beyond 500 W h kg-1

As industries and consumption patterns evolve, new electrical appliances are increasingly playing critical roles in national production, defense, and cognitive exploration. However, the slow development of energy storage devices with ultra-high energy density (beyond 500 W h kg-1) has impeded the promotion and widespread application of the next generation of intelligent, multi-scenario electrical equipment. Among the numerous ultra-high specific energy battery systems, lithium metal batteries (LMBs) hold significant potential for applications in advanced and sophisticated fields. This potential is primarily due to lithium metal's high specific capacity (3860 mA h g-1). However, LMBs face numerous challenges, including the growth of lithium dendrites, poor cycle stability, and safety concerns. In recent years, research on the mechanisms of Li metal-based battery systems, innovation in electrode materials, and optimization of device configurations have made significant progress. In this highlight, we provide a comprehensive overview of the storage mechanisms and the latest advancements in high-energy-density LMBs, represented by systems such as Li-Li1-xMO2, Li-S/Se, Li-gas (CO2/air/O2), Li-CFx, and all-solid-state LMBs. By integrating the current research findings, we highlight the opportunities and future research directions for high-energy-density LMBs, offering new guiding perspectives for their development under practical conditions.

Li2ZnCu3 Modified Cu Current Collector to Regulate Li Deposition

Rationally designing a current collector that can maintain low lithium (Li) porosity and smooth morphology while enduring high-loading Li deposition is crucial for realizing the high energy density of Li metal batteries, but it is still challengeable. Herein, a Li2ZnCu3 alloy-modified Cu foil is reported as a stable current collector to fulfill the stable high-loading Li deposition. Benefiting from the in situ alloying, the generated numerous Li2ZnCu3@Cu heterojunctions induce a homogeneous Li nucleation and dense growth even at an ultrahigh capacity of 12 mAh cm-2. Such a spatial structure endows the overall Li2ZnCu3@Cu electrode with the manipulated steric hindrance and outmost surface electric potential to suppress the side reactions during Li stripping and plating. The resultant Li||Li2ZnCu3@Cu asymmetric cell preserves an ultrahigh average Coulombic efficiency of 99.2 % at 3 mA cm-2/6 mAh cm-2 over 200 cycles. Moreover, the Li-Li2ZnCu3@Cu||LiFePO4 cell maintains a cycling stability of 87.5 % after 300 cycles. After coupling with the LiCoO2 cathode (4 mAh cm-2), the cell exhibits a high energy density of 407.4 Wh kg-1 with remarkable cycling reversibility at an N/P ratio of 3. All these findings present a doable way to realize the high-capacity, dendrite-free, and dense Li deposition for high-performance Li metal batteries.

An In Situ Generated Organic/Inorganic Hybrid SEI Layer Enables Li Metal Anodes with Dendrite Suppression Ability, High-Rate Capability, and Long-Life Stability

High-quality solid electrolyte interphase (SEI) layers can effectively suppress the growth of Li dendrites and improve the cycling stability of lithium metal batteries. Herein, 1-(6-bromohexanoyl)-3-butylurea is used to construct an organic/inorganic hybrid (designated as LiBr-HBU) SEI layer that features a uniform and compact structure. The LiBr-HBU SEI layer exhibits superior electrolyte wettability and air stability as well as strong attachment to Li foils. The LiBr-HBU SEI layer achieves a Li+ conductivity of 2.75 × 10-4 S cm-1, which is ≈50-fold higher than the value measured for a native SEI layer. A Li//Li symmetric cell containing the LiBr-HBU SEI layer exhibits markedly improved cyclability when compared with the cell containing a native SEI layer, especially at a high current density (e.g., cycling life up to 1333 h at 15 mA cm-2). The LiBr-HBU SEI layer also improves the performance of lithium-sulfur cells, particularly the rate capability (548 mAh g-1 at 10 C) and cycling stability (513 mAh g-1 at 0.5 C after 500 cycles). The methodology described can be extended to the commercial processing of Li metal anodes as the artificial SEI layer also protects Li metal against corrosion.

Interface Modifications of Lithium Metal Anode for Lithium Metal Batteries

Lithium metal batteries (LMBs) enable much higher energy density than lithium-ion batteries (LIBs) and thus hold great promise for future transportation electrification. However, the adoption of lithium metal (Li) as an anode poses serious concerns about cell safety and performance, which has been hindering LMBs from commercialization. To this end, extensive effort has been invested in understanding the underlying mechanisms theoretically and experimentally and developing technical solutions. In this review, we devote to providing a comprehensive review of the challenges, characterizations, and interfacial engineering of Li anodes in both liquid and solid LMBs. We expect that this work will stimulate new efforts and help peer researchers find new solutions for the commercialization of LMBs.

Reactive Solid Polymer Layer: From a Single Fluoropolymer to Divergent Fluorinated Interface

Controlling the structure and chemistry of solid electrolyte interphase (SEI) underpins the stability of electrolyte-electrode interface, and is crucial for advancing rechargeable lithium metal batteries (LMBs). Here, we utilized photo-controlled copolymerization to achieve the on-demand synthesis of fluorosulfonyl fluoropolymers as unprecedented artificial SEI layers on Li metal anodes. This work not only enables instant formation of a hybrid polymer-inorganic interphase that consists of a polymer-enriched top layer and a LiF-fortified bottom layer, originating from a single polymeric component, but also imparts various desirable physical properties (e.g., good mechanical strength and flexibility, high ion conductivity, low overpotential) to SEI via a single-to-divergent strategy. Model reactions and structural characterizations supported the formation of a divergent fluorinated interphase, which furnished prolonged stabilization of Li deposition, high coulombic efficiency and improved cycling behavior in electrochemical experiments. This work highlights the great potential of exploring reactive polymers as versatile coatings to stabilize Li metal anodes, providing a promising avenue to solve electrode-electrolyte interfacial problems for LMBs.

LiF-Rich Solid Electrolyte Interphase Formation by Establishing Sacrificial Layer on the Separator

The formation of a stable solid electrolyte interphase (SEI) layer is crucial for enhancing the safety and lifespan of Li metal batteries. Fundamentally, a homogeneous Li+ behavior by controlling the chemical reaction at the anode/electrolyte interface is the key to establishing a stable SEI layer. However, due to the highly reactive nature of Li metal anodes (LMAs), controlling the movement of Li+ at the anode/electrolyte interface remains challenging. Here, an advanced approach is proposed for coating a sacrificial layer called fluorinated self-assembled monolayer (FSL) on a boehmite-coated polyethylene (BPE) separator to form a stable SEI layer. By leveraging the strong affinity between the fluorine functional group and Li+, the rapid formation of a LiF-rich SEI layer in the cell production and early cycling stage is facilitated. This initial stable SEI formation promotes the subsequent homogeneous Li+ flux, thereby improving the LMA stability and yielding an enhanced battery lifespan. Further, the mechanism behind the stable SEI layer generation by controlling the Li+ dynamics through the FSL-treated BPE separator is comprehensively verified. Overall, this research offers significant contributions to the energy storage field by addressing challenges associated with LMAs, thus highlighting the importance of interfacial control in achieving a stable SEI layer.

LiF-Rich Alloy-Doped SEI Enabling Ultra-Stable and High-Rate Li Metal Anode

Li metal is regarded as the "Holy Grail" in the next generation of anode materials due to its high theoretical capacity and low redox potential. However, sluggish Li ions interfacial transport kinetics and uncontrollable Li dendrites growth limit practical application of the energy storage system in high-power device. Herein, separators are modified by the addition of a coating, which spontaneously grafts onto the Li anode interface for in situ lithiation. The resultant alloy possessing of strong electron-donating property promotes the decomposition of lithium bistrifluoromethane sulfonimide in the electrolyte to form a LiF-rich alloy-doped solid electrolyte interface (SEI) layer. High ionic alloy solid solution diffusivity and electric field dispersion modulation accelerate Li ions transport and uniform stripping/plating, resulting in a high-power dendrite-free Li metal anode interface. Surprisingly, the formulated SEI layer achieves an ultra-long cycle life of over 8000 h (20,000 cycles) for symmetric cells at a current density of 10 mA cm-2. It also ensures that the NCM(811)//PP@Au//Li full cell at ultra-high currents (40 C) completes the charging/discharging process in only 68 s to provide high capacity of 151 mAh g-1. The results confirm that this scalable strategy has great development potential in realizing high power dendrite-free Li metal anode.

Rechargeable alkali metal-chlorine batteries: advances, challenges, and future perspectives

The emergence of Li-SOCl2 batteries in the 1970s as a high-energy-density battery system sparked considerable interest among researchers. However, limitations in the primary cell characteristics have restricted their potential for widespread adoption in today's sustainable society. Encouragingly, recent developments in alkali/alkaline-earth metal-Cl2 (AM-Cl2) batteries have shown impressive reversibility with high specific capacity and cycle performance, revitalizing the potential of SOCl2 batteries and becoming a promising technology surpassing current lithium-ion batteries. In this review, the emerging AM-Cl2 batteries are comprehensively summarized for the first time. The development history and advantages of Li-SOCl2 batteries are traced, followed by the critical working mechanisms for achieving high rechargeability. The design concepts of electrodes and electrolytes for AM-Cl2 batteries as well as key characterization techniques are also demonstrated. Furthermore, the current challenges and corresponding strategies, as well as future directions regarding the battery are systematically discussed. This review aims to deepen the understanding of the state-of-the-art AM-Cl2 battery technology and accelerate the development of practical AM-Cl2 batteries for next-generation high-energy storage systems.

High-voltage electrosynthesis of organic-inorganic hybrid with ultrahigh fluorine content toward fast Li-ion transport

Hybrid materials with a rational organic-inorganic configuration can offer multifunctionality and superior properties. This principle is crucial but challenging to be applied in designing the solid electrolyte interphase (SEI) on lithium metal anodes (LMAs), as it substantially affects Li+ transport from the electrolyte to the anode. Here, an artificial SEI with an ultrahigh fluorine content (as high as 70.12 wt %) can be successfully constructed on the LMA using a high-voltage electrosynthesis strategy. This SEI consists of ultrafine lithium fluoride nanocrystals embedded in a fluorinated organic matrix, exhibiting excellent passivation and mechanical strength. Notably, the organic-inorganic interface demonstrates a high dielectric constant that enables fast Li+ transport throughout the SEI. Consequently, LMA coated with this SEI substantially enhances the cyclability of both half-cells and full cells, even under rigorous conditions. This work demonstrates the potential of rationally designed hybrid materials via a unique electrosynthetic approach for advanced electrochemical systems.

In Situ Plasma Polymerization of Self-Stabilized Polythiophene Enables Dendrite-Free Lithium Metal Anodes with Ultra-Long Cycle Life

Constructing a flexible and chemically stable multifunctional layer for the lithium (Li) metal anodes is a highly effective approach to improve the uneven deposition of Li+ and suppress the dendrite growth. Herein, an organic protecting layer of polythiophene is in situ polymerized on the Li metal via plasma polymerization. Compared with the chemically polymerized thiophene (C-PTh), the plasma polymerized thiophene layer (P-PTh), with a higher Young's modulus of 8.1 GPa, shows strong structural stability due to the chemical binding of the polythiophene and Li. Moreover, the nucleophilic C─S bond of polythiophene facilitates the decomposition of Li salts in the electrolytes, promoting the formation of LiF-rich solid electrolyte interface (SEI) layers. The synergetic effect of the rigid LiF as well as the flexible PTh-Li can effectively regulate the uniform Li deposition and suppress the growth of Li dendrites during the repeated stripping-plating, enabling the Li anodes with long-cycling lifespan over 8000 h (1 mA cm-2, 1 mAh cm-2) and 2500 h (10 mA cm-2, 10 mAh cm-2). Since the plasma polymerization is facile (5-20 min) and environmentally friendly (solvent-free), this work offers a novel and promising strategy for the construction of the forthcoming generation of high-energy-density batteries.

Decreased Electrically and Increased Ionically Conducting Scaffolds for Long-Life, High-Rate and Deep-Capacity Lithium-Metal Anodes

Lithium (Li) metal batteries are deemed as promising next-generation power solutions but are hindered by the uncontrolled dendrite growth and infinite volume change of Li anodes. The extensively studied 3D scaffolds as solutions generally lead to undesired "top-growth" of Li due to their high electrical conductivity and the lack of ion-transporting pathways. Here, by reducing electrical conductivity and increasing the ionic conductivity of the scaffold, the deposition spot of Li to the bottom of the scaffold can be regulated, thus resulting in a safe bottom-up plating mode of the Li and dendrite-free Li deposition. The resulting symmetrical cells with these scaffolds, despite with a limited pre-plated Li capacity of 5 mAh cm-2, exhibit ultra-stable Li plating/stripping for over 1 year (11 000 h) at a high current density of 3 mA cm-2 and a high areal capacity of 3 mAh cm-2. Moreover, the full cells with these scaffolds further demonstrate high cycling stability under challenging conditions, including high cathode loading of 21.6 mg cm-2, low negative-to-positive ratio of 1.6, and limited electrolyte-to-capacity ratio of 4.2 g Ah-1.

Advancing Metallic Lithium Anodes: A Review of Interface Design, Electrolyte Innovation, and Performance Enhancement Strategies

Lithium (Li) metal is one of the most promising anode materials for next-generation, high-energy, Li-based batteries due to its exceptionally high specific capacity and low reduction potential. Nonetheless, intrinsic challenges such as detrimental interfacial reactions, significant volume expansion, and dendritic growth present considerable obstacles to its practical application. This review comprehensively summarizes various recent strategies for the modification and protection of metallic lithium anodes, offering insight into the latest advancements in electrode enhancement, electrolyte innovation, and interfacial design, as well as theoretical simulations related to the above. One notable trend is the optimization of electrolytes to suppress dendrite formation and enhance the stability of the electrode-electrolyte interface. This has been achieved through the development of new electrolytes with higher ionic conductivity and better compatibility with Li metal. Furthermore, significant progress has been made in the design and synthesis of novel Li metal composite anodes. These composite anodes, incorporating various additives such as polymers, ceramic particles, and carbon nanotubes, exhibit improved cycling stability and safety compared to pure Li metal. Research has used simulation computing, machine learning, and other methods to achieve electrochemical mechanics modeling and multi-field simulation in order to analyze and predict non-uniform lithium deposition processes and control factors. In-depth investigations into the electrochemical reactions, interfacial chemistry, and physical properties of these electrodes have provided valuable insights into their design and optimization. It systematically encapsulates the state-of-the-art developments in anode protection and delineates prospective trajectories for the technology's industrial evolution. This review aims to provide a detailed overview of the latest strategies for enhancing metallic lithium anodes in lithium-ion batteries, addressing the primary challenges and suggesting future directions for industrial advancement.

Fluorinated Surface Engineering Towards High-Rate and Durable Potassium-Ion Battery

Solid electrolyte interphase (SEI) crucially affects the rate performance and cycling lifespan, yet to date more extensive research is still needed in potassium-ion batteries. We report an ultra-thin and KF-enriched SEI triggered by tuned fluorinated surface design in electrode. Our results reveal that fluorination engineering alters the interfacial chemical environment to facilitate inherited electronic conductivity, enhance adsorption ability of potassium, induce localized surface polarization to guide electrolyte decomposition behavior for SEI formation, and especially, enrich the KF crystals in SEI by self-sacrifice from C-F bond cleavage. Hence, the regulated fluorinated electrode with generated ultra-thin, uniform, and KF-enriched SEI shows improved capacity of 439.3 mAh g-1 (3.82 mAh cm-2), boosted rate performance (202.3 mAh g-1 at 8.70 mA cm-2) and durable cycling performance (even under high loading of ~8.7 mg cm-2). We expect this practical engineering principle to open up new opportunities for upgrading the development of potassium-ion batteries.

Synergistic Drug-Loaded Shear-Thinning Star Polymer Hydrogel Facilitates Gastrointestinal Lesion Resection and Promotes Wound Healing

Easy injection, long-lasting barrier, and drug loading are the critical properties of submucosal injection materials for endoscopic surgery. However, conventional injectable polymers face challenges in simultaneously attaining these properties due to the inherent conflict between injectability and in situ stability. Here, a multi-arm star polymer hydrogel (denoted as βCP hydrogel) with long-lasting submucosal barrier (exceeding 120 min), rapid hemostasis, and sustained antibacterial properties is successfully developed by grafting poly(oligo(ethylene glycol) methyl ether methacrylate) (PEGMA) side-chains from β-CD via atom transfer radical polymerization (ATRP). During the onset of shearing, βCP hydrogel experiences the unwinding of polymer side-chains between neighboring star polymers, which facilitates the process of endoscopic injectability. After submucosal injection, βCP hydrogel undergoes the winding of polymer side-chains, thereby establishing a long-lasting barrier cushion. Meanwhile, owing to its distinctive structures with a hydrophobic inner cavity and an outer layer of hydrophilic polymer side-chains, βCP hydrogel enables simultaneous loading and on-demand release of diverse categories of drugs. This unique performance can adapt to the diverse demands during different stages of wound healing in a porcine endoscopic surgery model. These results indicate an appealing prospect for new application of star polymers as a good submucosal injection material in endoscopic treatments.

Scalable Customization of Crystallographic Plane Controllable Lithium Metal Anodes for Ultralong-Lasting Lithium Metal Batteries

A formidable challenge to achieve the practical applications of rechargeable lithium (Li) metal batteries (RLMBs) is to suppress the uncontrollable growth of Li dendrites. One of the most effective solutions is to fabricate Li metal anodes with specific crystal plane, but still lack of a simple and high-efficient approach. Herein, a facile and controllable way for the scalable customization of polished Li metal anodes with highly preferred (110) and (200) crystallographic orientation (donating as polished Li(110) and polished Li(200), respectively) by regulating the times of accumulative roll bonding, is reported. According to the inherent characteristics of polished Li(110)/Li(200), the influence of Li atomic structure on the electrochemical performance of RLMBs is deeply elucidated by combining theoretical calculations with relative experimental proofs. In particular, a polished Li(110) crystal plane is demonstrated to induce Li+ uniform deposition, promoting the formation of flat and dense Li deposits. Impressively, the polished Li(110)||LiFePO4 full cells exhibit unprecedented cycling stability with 10 000 cycles at 10 C almost without capacity degradation, indicating the great potential application prospect of such textured Li metal. More valuably, this work provides an important reference for low-cost, continued, and large-scale production of Li metal anodes with highly preferred crystal orientation through roll-to-roll manufacturability.

Plasma Coupled Electrolyte Additive Strategy for Construction of High-Performance Solid Electrolyte Interphase on Li Metal Anodes

High-performance lithium metal anodes are crucial for the development of advanced Li metal batteries. Herein, this work reports a novel plasma coupled electrolyte additive strategy to prepare high-quality composite solid electrolyte interphase (SEI) on Li metal to achieve enhanced performance and stability. With the guidance of calculations, this work selects diethyl dibromomalonate (DB) as an additive to optimize the solvation structure of electrolytes to modify the SEI. Meanwhile, this work groundbreakingly develops DB plasma technology coupled with DB electrolyte additive to construct a combinatorial SEI: inner plasma-induced SEI layer composed of LiBr and Li2CO3 plus additive-reduced SEI containing LiBr/Li2CO3/organic lithium compounds as an outer compatible layer. The optimized hybrid SEI has strong affinity toward Li+ and good mechanical properties, thereby inducing horizontal dispersion and uniform deposition of Li+ and keep structure stable. Accordingly, the symmetrical cells exhibit enhanced cycling stability for 1200 h at an overpotential of 23.8 mV with average coulombic efficiency (99.51%). Additionally, the full cells with LiNi0.8Co0.1Mn0.1O2 cathode deliver a capacity retention of 81.7% after 300 cycles at 0.5 C, and the pouch cell achieves a volumetric specific energy of ≈664 Wh L‒1. This work provides new enlightenment on plasma technology for fabrication of advanced metal anodes for energy storage.

Induced Anionic Functional Group Orientation-Assisted Stable Electrode-Electrolyte Interphases for Highly Reversible Zinc Anodes

Dendrite growth and other side-reaction problems of zinc anodes in aqueous zinc-ion batteries heavily affect their cycling lifespan and Coulombic efficiency, which can be effectively alleviated by the application of polymer-based functional protection layer on the anode. However, the utilization rate of functional groups is difficult to improve without destroying the polymer chain. Here, a simple and well-established strategy is proposed by controlling the orientation of functional groups (─SO3H) to assist the optimization of zinc anodes. Depending on the electrostatic effect, the surface-enriched ─SO3H groups increase the ionic conductivity and homogenize the Zn2+ flux while inhibiting anionic permeation. This approach avoids the destruction of the polymer backbone by over-sulfonation and amplifies the effect of functional groups. Therefore, the modified sulfonated polyether ether ketone (H-SPEEK) coating-optimized zinc anode is capable of longtime stable zinc plating/stripping, and moreover an enhanced cycling steadiness under high current densities is also detected in a series of Zn batteries with different cathode materials, which achieved by the inclusion of H-SPEEK coating without causing any harmful effects on the electrolyte and cathode. This work provides an easy and efficient approach to further optimize the plating/stripping of cations on metal electrodes, and sheds lights on the scale-up of high-performance aqueous zinc-ion battery technology.

Bottom Deposition Enables Stable All-Solid-State Batteries with Ultrathin Lithium Metal Anode

Modern strides in energy storage underscore the significance of all-solid-state batteries (ASSBs) predicated on solid electrolytes and lithium (Li) metal anodes in response to the demand for safer batteries. Nonetheless, ASSBs are often beleaguered by non-uniform Li deposition during cycling, leading to compromised cell performance from internal short circuits and hindered charge transfer. In this study, the concept of "bottom deposition" is introduced to stabilize metal deposition based on the lithiophilic current collector and a protective layer composed of a polymeric binder and carbon black. The bottom deposition, wherein Li plating ensues between the protective layer and the current collector, circumvents internal short circuits and facilitates uniform volumetric changes of Li. The prepared functional binder for the protective layer presents outstanding mechanical robustness and adhesive properties, which can withstand the volume expansion caused by metal growth. Furthermore, its excellent ion transfer properties promote uniform Li bottom deposition even under a current density of 6 mA·cm-2. Also, scanning electron microscopy analysis reveals a consistent plating/stripping morphology of Li after cycling. Consequently, the proposed system exhibits enhanced electrochemical performance when assessed within the ASSB framework, operating under a configuration marked by a high Li utilization rate reliant on an ultrathin Li.

Fast Interfacial Defluorination Kinetics Enables Stable Cycling of Low-Temperature Lithium Metal Batteries

The development of low-temperature lithium metal batteries (LMBs) encounters significant challenges because of severe dendritic lithium growth during the charging/discharging processes. To date, the precise origin of lithium dendrite formation still remains elusive due to the intricate interplay between the highly reactive lithium metal anode and organic electrolytes. Herein, we unveil the critical role of interfacial defluorination kinetics of localized high-concentration electrolytes (LHCEs) in regulating lithium dendrite formation, thereby determining the performance of low-temperature LMBs. We investigate the impact of solvation structures of LHCEs on low-temperature LMBs by employing tetrahydrofuran (THF) and 2-methyltetrahydrofuran (2-MeTHF) as comparative solvents. The combination of comprehensive characterizations and theoretical simulations reveals that the THF-based LHCE featured with a strong solvation strength exhibits fast interfacial defluorination reaction kinetics, thus leading to the formation of an amorphous and inorganic-rich solid-electrolyte interphase (SEI) that can effectively suppress the growth of lithium dendrites. As a result, the highly reversible Li metal anode achieves an exceptional Coulombic efficiency (CE) of up to ∼99.63% at a low temperature of -30 °C, thereby enabling stable cycling of low-temperature LMB full cells. These findings underscore the crucial role of electrolyte interfacial reaction kinetics in shaping SEI formation and provide valuable insights into the fundamental understanding of electrolyte chemistry in LMBs.

Biomimetic Superstructured Interphase for Aqueous Zinc-Ion Batteries

The practical application of aqueous zinc-ion batteries (AZIBs) is greatly challenged by rampant dendrites and pestilent side reactions resulting from an unstable Zn-electrolyte interphase. Herein, we report the construction of a reliable superstructured solid electrolyte interphase for stable Zn anodes by using mesoporous polydopamine (2D-mPDA) platelets as building blocks. The interphase shows a biomimetic nacre's "brick-and-mortar" structure and artificial transmembrane channels of hexagonally ordered mesopores in the plane, overcoming the mechanical robustness and ionic conductivity trade-off. Experimental results and simulations reveal that the -OH and -NH groups on the surface of artificial ion channels can promote rapid desolvation kinetics and serve as an ion sieve to homogenize the Zn2+ flux, thus inhibiting side reactions and ensuring uniform Zn deposition without dendrites. The 2D-mPDA@Zn electrode achieves an ultralow nucleation potential of 35 mV and maintains a Coulombic efficiency of 99.8% over 1500 cycles at 5 mA cm-2. Moreover, the symmetric battery exhibits a prolonged lifespan of over 580 h at a high current density of 20 mA cm-2. This biomimetic superstructured interphase also demonstrates the high feasibility in Zn//VO2 full cells and paves a new route for rechargeable aqueous metal-ion batteries.

Construction of SnO2 buffer layer and analysis of its interface modification for Li and Li1.5Al0.5Ge1.5(PO4)3 in solid-state batteries

SnO2 layer between Li1.5Al0.5Ge1.5(PO4)3 (LAGP) and lithium anode was prepared through simple scratch-coating process to improve interface properties. The physical phase, morphology, and electrochemical properties of Li/SnO2/LAGP structure were characterized by X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, and electrochemical analytical methods. It was found that SnO2 layer effectively improved the interface stability of LAGP and lithium anode. The prepared Li/SnO2/LAGP/SnO2/Li symmetric cell exhibited a large critical current density of 1.8 mA cm-2 and demonstrated excellent cycling characteristics. The polarization voltages of symmetric cell were 0.1 V and 0.8 V after 1000 h of cycling at current densities of 0.04 mA cm-2 and 0.5 mA cm-2, respectively. Li/SnO2@LAGP/LiFePO4 solid-state full cells were also assembled, exhibiting a discharge specific capacity of 150 mAh g-1 after 200 cycles at 0.1C with capacity retention rate of 96 %. The good interface properties of Li/SnO2/LAGP structure are attributed to the transformation of SnO2 layer into a buffer layer containing Li2O, Sn0, and LixSny alloy during cycling process, which effectively inhibits the reduction reaction between LAGP and lithium anode.

Sustained Release-Driven Interface Engineering Enables Fast Charging Lithium Metal Batteries

LiNO3 has attracted intensive attention as a promising electrolyte additive to regulate Li deposition behavior as it can form favorable Li3N, LiNxOy species to improve the interfacial stability. However, the inferior solubility in carbonate-based electrolyte restricts its application in high-voltage Li metal batteries. Herein, an artificial composite layer (referred to as PML) composed of LiNO3 and PMMA is rationally designed on Li surface. The PML layer serves as a reservoir for LiNO3 release gradually to the electrolyte during cycling, guaranteeing the stability of SEI layer for uniform Li deposition. The PMMA matrix not only links the nitrogen-containing species for uniform ionic conductivity but also can be coordinated with Li for rapid Li ions migration, resulting in homogenous Li-ion flux and dendrite-free morphology. As a result, stable and dendrite-free plating/stripping behaviors of Li metal anodes are achieved even at an ultrahigh current density of 20 mA cm-2 (>570 h) and large areal capacity of 10 mAh cm-2 (>1200 h). Moreover, the Li||LiFePO4 full cell using PML-Li anode undergoes stable cycling for 2000 cycles with high-capacity retention of 94.8%. This facile strategy will widen the potential application of LiNO3 in carbonate-based electrolyte for practical LMBs.

Operando Building of a Superior Interface Hybrid Film Enables Chemomechanically Durable Co-Free Ni-Rich Cathodes

The Co-free Ni-rich layered cathodes become pivotal to reduce cost and increase benefit toward next-generation Li-ion batteries yet raise a major challenge for their extremely fragile cathode-electrolyte interface (CEI) film. Herein, we report the in situ construction of the Si/B-enriched organic-inorganic hybrid CEI films on LiNi0.9Mn0.1O2 (NM91) with the assistance of tris(trimethylsilyl) borate (TMSB) additive. The hybrid film exhibits superior Young's modulus, mechanical strength, and ductility, which greatly dissipate the microstrain of Co-free Ni-rich cathodes under various states of charge with high structural integrity. Furthermore, the surface oxygen anions have been significantly stabilized by bonding with the Si and B ions of TMSB with high safety. These merits enable a durable Co-free Ni-rich layered cathode with 96.9% and 87.7% capacity retentions (versus 72.7% and 70.2% of NM91) at a high rate of 5C and a high-temperature of 55 °C after 100 cycles. In a pouch-type full cell, 88.8% of initial capacity is still maintained after cycling at 1C for 500 times, greatly expediting the development and application of Co-free Ni-rich layered cathodes.

Sulfur Vacancies and 1T Phase-Rich MoS2 Nanosheets as an Artificial Solid Electrolyte Interphase for 400 Wh kg-1 Lithium Metal Batteries

Constructing large-area artificial solid electrolyte interphase (SEI) to suppress Li dendrites growth and electrolyte consumption is essential for high-energy-density Li metal batteries (LMBs). Herein, chemically exfoliated ultrathin MoS2 nanosheets (EMoS2) as an artificial SEI are scalable transfer-printed on Li-anode (EMoS2@Li). The EMoS2 with a large amount of sulfur vacancies and 1T phase-rich acts as a lithiophilic interfacial ion-transport skin to reduce the Li nucleation overpotential and regulate Li+ flux. With favorable Young's modulus and homogeneous continuous layered structure, the proposed EMoS2@Li effectively suppresses the growth of Li dendrites and repeat breaking/reforming of the SEI. As a result, the assembled EMoS2@Li||LiFePO4 and EMoS2@Li||LiNi0.8Co0.1Mn0.1O2 batteries demonstrate high-capacity retention of 93.5% and 92% after 1000 cycles and 300 cycles, respectively, at ultrahigh cathode loading of 20 mg cm-2. Ultrasonic transmission technology confirms the admirable ability of EMoS2@Li to inhibit Li dendrites in practical pouch batteries. Remarkably, the Ah-class EMoS2@Li||LiNi0.8Co0.1Mn0.1O2 pouch battery exhibits an energy density of 403 Wh kg-1 over 100 cycles with the low negative/positive capacity ratio of 1.8 and electrolyte/capacity ratio of 2.1 g Ah-1. The strategy of constructing an artificial SEI by sulfur vacancies-rich and 1T phase-rich ultrathin MoS2 nanosheets provides new guidance to realize high-energy-density LMBs with long cycling stability.

Achieving Stable Lithium Anodes through Leveraging Inevitable Stress Variations via Adaptive Piezoelectric Effect

Unleashing the potential of lithium-metal anodes in practical applications is hindered by the inherent stress-related challenges arising from their limitless volume expansion, leading to mechanical failures such as electrode cracking, solid electrolyte interphase damage, and dendritic growth. Despite the various protective strategies to "combat" stress in lithium-metal anodes, they fail to address the intrinsic issue fundamentally. Here, a unique strategy is proposed that leverages the stress generated during the battery cycling via the piezoelectric effect, transforming to the adaptive built-in electric field to accelerate lithium-ion migration, homogenize the lithium deposition, and alleviate the stress concentration. The mechanism of the piezoelectric effect in modulating electro-chemomechanical field evolution is further validated and decoupled through finite element method simulations. Inspired by this strategy, a high sensitivity, fast responsive, and strength adaptability polymer piezoelectric is used to demonstrate the feasibility and the corresponding protected lithium-metal anode shows cycling stability over 6000 h under a current density of 10 mA cm-2 and extending life in a variety of coin and pouch cell systems. This work effectively tackles the stress-related issues and decoupling the electro-chemomechanical field evolution also contributes to developing more stable lithium anodes for future research.

Ultralong Cycling and Safe Lithium-Sulfur Pouch Cells for Sustainable Energy Storage

While layered metal oxides remain the dominant cathode materials for the state-of-the-art lithium-ion batteries, conversion-type cathodes such as sulfur present unique opportunities in developing cheaper, safer, and more energy-dense next-generation battery technologies. There has been remarkable progress in advancing the laboratory scale lithium-sulfur (Li-S) coin cells to a high level of performance. However, the relevant strategies cannot be readily translated to practical cell formats such as pouch cells and even battery pack. Here these key technical challenges are addressed by molecular engineering of the Li metal for hydrophobicization, fluorination and thus favorable anode chemistry. The introduced tris(2,4-di-tert-butylphenyl) phosphite (TBP) and tetrabutylammonium fluoride (TBA+F-) as well as cellulose membrane by rolling enables the formation of a functional thin layer that eliminates the vulnerability of Li metal towards the already demanding environment required (1.55% relative humidity) for cell production and gives rise to LiF-rich solid electrolyte interphase (SEI) to suppress dendrite growth. As a result, Li-S pouch cells assembled at a pilot production line survive 400 full charge/discharge cycles with an average Coulombic efficiency of 99.55% and impressive rate performance of 1.5 C. A cell-level energy density of 417 Wh kg-1 and power density of 2766 W kg-1 are also delivered via multilayer Li-S pouch cell. The Li-S battery pack can even power an unmanned aerial vehicle of 3 kg for a fairly long flight time. This work represents a big step forward acceleration in Li-S battery marketization for future energy storage featuring improved safety, sustainability, higher energy density as well as reduced cost.

Bipolar Polymeric Protective Layer for Dendrite-Free and Corrosion-Resistant Lithium Metal Anode in Ethylene Carbonate Electrolyte

The unstable interface between Li metal and ethylene carbonate (EC)-based electrolytes triggers continuous side reactions and uncontrolled dendrite growth, significantly impacting the lifespan of Li metal batteries (LMBs). Herein, a bipolar polymeric protective layer (BPPL) is developed using cyanoethyl (-CH2CH2C≡N) and hydroxyl (-OH) polar groups, aiming to prevent EC-induced corrosion and facilitating rapid, uniform Li+ ion transport. Hydrogen-bonding interactions between -OH and EC facilitates the Li+ desolvation process and effectively traps free EC molecules, thereby eliminating parasitic reactions. Meanwhile, the -CH2CH2C≡N group anchors TFSI- anions through ion-dipole interactions, enhancing Li+ transport and eliminating concentration polarization, ultimately suppressing the growth of Li dendrite. This BPPL enabling Li|Li cell stable cycling over 750 cycles at 10 mA cm-2 for 2 mAh cm-2. The Li|LiNi0.8Mn0.1Co0.1O2 and Li|LiFePO4 full cells display superior electrochemical performance. The BPPL provides a practical strategy to enhanced stability and performance in LMBs application.

Electrochemical coupling in subnanometer pores/channels for rechargeable batteries

Subnanometer pores/channels (SNPCs) play crucial roles in regulating electrochemical redox reactions for rechargeable batteries. The delicately designed and tailored porous structure of SNPCs not only provides ample space for ion storage but also facilitates efficient ion diffusion within the electrodes in batteries, which can greatly improve the electrochemical performance. However, due to current technological limitations, it is challenging to synthesize and control the quality, storage, and transport of nanopores at the subnanometer scale, as well as to understand the relationship between SNPCs and performances. In this review, we systematically classify and summarize materials with SNPCs from a structural perspective, dividing them into one-dimensional (1D) SNPCs, two-dimensional (2D) SNPCs, and three-dimensional (3D) SNPCs. We also unveil the unique physicochemical properties of SNPCs and analyse electrochemical couplings in SNPCs for rechargeable batteries, including cathodes, anodes, electrolytes, and functional materials. Finally, we discuss the challenges that SNPCs may face in electrochemical reactions in batteries and propose future research directions.

An ultralight, pulverization-free integrated anode toward lithium-less lithium metal batteries

The high-capacity advantage of lithium metal anode was compromised by common use of copper as the collector. Furthermore, lithium pulverization associated with "dead" Li accumulation and electrode cracking deteriorates the long-term cyclability of lithium metal batteries, especially under realistic test conditions. Here, we report an ultralight, integrated anode of polyimide-Ag/Li with dual anti-pulverization functionality. The silver layer was initially chemically bonded to the polyimide surface and then spontaneously diffused in Li solid solution and self-evolved into a fully lithiophilic Li-Ag phase, mitigating dendrites growth or dead Li. Further, the strong van der Waals interaction between the bottommost Li-Ag and polyimide affords electrode structural integrity and electrical continuity, thus circumventing electrode pulverization. Compared to the cutting-edge anode-free cells, the batteries pairing LiNi0.8Mn0.1Co0.1O2 with polyimide-Ag/Li afford a nearly 10% increase in specific energy, with safer characteristics and better cycling stability under realistic conditions of 1× excess Li and high areal-loading cathode (4 milliampere hour per square centimeter).

A Thiol Branched 3D Network Quasi Solid-State Polymer Electrolyte Reinforced by Covalent Organic Frameworks for Lithium Metal Batteries

Quasi solid-state polymer electrolytes (QSPEs) are particularly attractive due to their high ionic conductivity and excellent safety for lithium metal batteries (LMBs). However, it is still a great challenge for QSPEs to achieve strong mechanical strength and high electrochemical performance simultaneously. Herein, a QSPE (SCOF-PEP-PEA) using a covalent organic framework (COF) containing abundant allyl groups (SCOF) as a rigid porous filler as well as a cross-linker to reinforce the polymer network is reported. Benefitting from the unique 3D nanonetwork structure and abundant lithiophilic functional groups, SCOF-PEP-PEA QSPE exhibits high ionic conductivity (4.0 × 10-4 S cm-1) and high lithium-ion transference number (0.82) at room temperature. Moreover, SCOF-PEP-PEA QSPE displays much improved mechanical strength compared to PEP-PEA QSPE (AFM Young's modulus: 453 vs 36 MPa). As a result, the Li/LFP full cell with SCOF-PEP-PEA QSPE shows great rate performance of 141 mAh g-1 at 1C and delivers a high specific capacity retention of 92% after 220 cycles at 0.5 C (60 °C). This work provides a new strategy to design and prepare high-performance QSPEs with COFs as porous organic filler, and further expand the application of COFs for energy storage applications.

Enabling Stable and Low-Strain Lithium Plating/Stripping with 2D Layered Transition Metal Carbides by Forming Li-Zipped MXenes and a Li Halide-Rich Solid Electrolyte Interphase

Two-dimensional (2D) layered materials demonstrate prominent advantage in regulating lithium plating/stripping behavior by confining lithium diffusion/plating within interlayer gaps. However, achieving effective interlayer confined lithium diffusion/plating without compromising the stability of bulk-structural and the solid electrolyte interphase (SEI) remains a considerable challenge. This paper presents an electrochemical scissor and lithium zipper-driven protocol for realizing interlayer confined lithium plating with pretty-low strain and volume change. In this protocol, lithium serves as a "zipper" to reunite the adjacent MXene back to MAX-like phase to markedly enhance the structural stability, and a lithium halide-rich SEI is formed by electrochemically removing the terminals of halogenated MXenes to maintain the stability and rapid lithium ions diffusion of SEI. When the Ti3 C2 I2 serves as the host for lithium plating, the average coulomb efficiency exceeds 97.0 % after 320 lithium plating/stripping cycles in conventional ester electrolyte. Furthermore, a full cell comprising of LiNi0.8 Mn0.1 Co0.1 O2 and Ti3 C2 I2 @Li exhibits a capacity retention rate of 73.4 % after 200 cycles even under high cathode mass-loading (20 mg cm-2 ) and a low negative/positive capacity ratio of 1.4. Our findings advance the understanding of interlayer confined lithium plating in 2D layered materials and provide a new direction in regulating lithium and other metal plating/stripping behaviors.

Recent Progress on the Air-Stable Battery Materials for Solid-State Lithium Metal Batteries

Solid-state lithium metal batteries (SSLMBs) offer numerous advantages in terms of safety and theoretical specific energy density. However, their main components namely lithium metal anode, solid-state electrolyte, and cathode, show chemical instability when exposed to humid air, which results in low capacities and poor cycling stability. Recent studies have shown that bioinspired hydrophobic materials with low specific surface energies can protect battery components from corrosion caused by humid air. Air-stable inorganic materials that densely cover the surface of battery components can also provide protection, which improves the storage stability of the battery components, broadens their processing conditions, and ultimately decreases their processing costs while enhancing their safety. In this review, the mechanism behind the surface structural degradation of battery components and the resulting consequences are discussed. Subsequently, recent strategies are reviewed to address this issue from the perspectives of lithium metal anodes, solid-state electrolytes, and cathodes. Finally, a brief conclusion is provided on the current strategies and fabrication suggestions for future safe air-stable SSLMBs.

In Situ Constructing of Rigid-Soft Coupling Solid-Electrolyte Interphase on Silicon Electrode toward High-Performance Lithium Ion Batteries

The application of Si anodes is hindered by some critical issues such as large volume changes of bare Si and fragile solid-electrolyte interface (SEI), resulting in low coulombic efficiency and rapid capacity decay. Herein, a multifunctional SEI film with high content of LiF is in situ constructed via the surface grafting of carbon-fluorine functionalized groups on silicon nanoparticles (SiNPs) during cycling. Mechanical study demonstrates that the incorporation of LiF with high modulus and unbroken carbon-fluorine groups with highly elastic guarantee the rigid-soft coupling SEI film on Si electrode. Furthermore, it is demonstrated that the rigid-soft coupling SEI film can effectively accommodate the volume expansion of Si nanoparticles during lithiation process, with the electrode expanding rate of only 114.16% after 100 cycles (263.87% for bare Si without surface modification). Afterward, with the aid of well-designed rigid-soft coupling SEI, the initial Coulomb efficiency of 89.8% is achieved, showing a reversible capacity of 1477 mAh g-1 after 200 cycles at 1.2 A g-1 . This work provides a simple and efficient solution that can potentially facilitate the practical application of Si anodes.

Interfacial solvation-structure regulation for stable Li metal anode by a desolvation coating technique

Rechargeable lithium (Li) metal batteries face challenges in achieving stable cycling due to the instability of the solid electrolyte interphase (SEI). The Li-ion solvation structure and its desolvation process are crucial for the formation of a stable SEI on Li metal anodes and improving Li plating/stripping kinetics. This research introduces an interfacial desolvation coating technique to actively modulate the Li-ion solvation structure at the Li metal interface and regulate the participation of the electrolyte solvent in SEI formation. Through experimental investigations conducted using a carbonate electrolyte with limited compatibility to Li metal, the optimized desolvation coating layer, composed of 12-crown-4 ether-modified silica materials, selectively displaces strongly coordinating solvents while simultaneously enriching weakly coordinating fluorinated solvents at the Li metal/electrolyte interface. This selective desolvation and enrichment effect reduce solvent participation to SEI and thus facilitate the formation of a LiF-dominant SEI with greatly reduced organic species on the Li metal surface, as conclusively verified through various characterization techniques including XPS, quantitative NMR, operando NMR, cryo-TEM, EELS, and EDS. The interfacial desolvation coating technique enables excellent rate cycling stability (i.e., 1C) of the Li metal anode and prolonged cycling life of the Li||LiCoO2 pouch cell in the conventional carbonate electrolyte (E/C 2.6 g/Ah), with 80% capacity retention after 333 cycles.

Functional Polymers as Artificial Solid Electrolyte Interfaces for Stabilizing Lithium Metal Anode

The practical implementation of the lithium metal anode (LMA) has long been pursued due to its extremely high specific capacity and low electrochemical equilibrium potential. However, the unstable interfaces resulting from lithium ultrahigh reactivity have significantly hindered the use of LMA. This instability directly leads to dendrite growth behavior, dead lithium, low Coulombic efficiency, and even safety concerns. Therefore, artificial solid electrolyte interfaces (ASEI) with enhanced physicochemical and electrochemistry properties have been explored to stabilize LMA. Polymer materials, with their flexible structures and multiple functional groups, offer a promising way for structurally designing ASEIs to address the challenges faced by LMA. This Concept demonstrates an overview of polymer ASEIs with different functionalities, such as providing uniform lithium ion and single-ion transportation, inhibiting side reactions, possessing self-healing ability, and improving air stability. Furthermore, challenges and prospects for the future application of polymeric ASEIs in commercial lithium metal batteries (LMBs) are also discussed.

Operando monitoring of dendrite formation in lithium metal batteries via ultrasensitive tilted fiber Bragg grating sensors

Lithium (Li) dendrite growth significantly deteriorates the performance and shortens the operation life of lithium metal batteries. Capturing the intricate dynamics of surface localized and rapid mass transport at the electrolyte-electrode interface of lithium metal is essential for the understanding of the dendrite growth process, and the evaluation of the solutions mitigating the dendrite growth issue. Here we demonstrate an approach based on an ultrasensitive tilted fiber Bragg grating (TFBG) sensor which is inserted close to the electrode surface in a working lithium metal battery, without disturbing its operation. Thanks to the superfine optical resonances of the TFBG, in situ and rapid monitoring of mass transport kinetics and lithium dendrite growth at the nanoscale interface of lithium anodes have been achieved. Reliable correlations between the performance of different natural/artificial solid electrolyte interphases (SEIs) and the time-resolved optical responses have been observed and quantified, enabling us to link the nanoscale ion and SEI behavior with the macroscopic battery performance. This new operando tool will provide additional capabilities for parametrization of the batteries' electrochemistry and help identify the optimal interphases of lithium metal batteries to enhance battery performance and its safety.

Impact of Graphitization Degree on the Electrochemical and Thermal Properties of Coal

Coal-based cryptocrystalline graphite is an intermediate phase formed during the transformation of highly metamorphic anthracite into crystalline graphite. In order to explore the relationship between the graphitization degree of coal-based cryptocrystalline graphite and its physical properties from macromolecular structure to provide a theoretical basis for industrial application, samples were tested by X-ray diffraction, electrochemistry, and thermal conductivity and compared with standard graphite (SG) and artificial thermal simulation graphitized samples. The results show that with the increase of graphitization degree and the growth of microcrystalline structure, the electrical impedance of cryptocrystalline graphite decreases, the conductivity increases, the specific capacity of initial discharge increases, and the thermal conductivity increases, which gradually approach the electrical and thermal properties of crystalline graphite. The linear equations between impedance and La and Lc are y = -0.42x + 70.44 and y = -1.87x + 70.62, and the correlation coefficients are 0.93 and 0.88. The linear equations between thermal conductivity and the horizontal extension length (La) and vertical stacking thickness (Lc) are y = 0.09x + 1.36 and y = 0.4x + 0.76, the correlation coefficients are 0.82 and 0.84., and the reduction of microcrystalline parameters d002 and the increase of La and Lc lead to a direct improvement of physical properties. Artificial thermal simulation samples also show the same regularity, but their physical properties are lower than those of natural evolution samples. Short-term high-temperature simulation is different from long-term magma heat and pressure, and the growth of graphite microcrystals is more complete under long-term geological conditions, resulting in better physical properties.

Labile Coordination Interphase for Regulating Lean Ion Dynamics in Reversible Zn Batteries

Rechargeability in zinc (Zn) batteries is limited by anode irreversibility. The practical lean electrolytes exacerbate the issue, compromising the cost benefits of zinc batteries for large-scale energy storage. In this study, a zinc-coordinated interphase is developed to avoid chemical corrosion and stabilize zinc anodes. The interphase promotes Zn2+ ions to selectively bind with histidine and carboxylate ligands, creating a coordination environment with high affinity and fast diffusion due to thermodynamic stability and kinetic lability. Experiments and simulations indicate that interphase regulates dendrite-free electrodeposition and reduces side reactions. Implementing such labile coordination interphase results in increased cycling at 20 mA cm-2 and high reversibility of dendrite-free zinc plating/stripping for over 200 hours. A Zn||LiMn2 O4 cell with 74.7 mWh g-1 energy density and 99.7% Coulombic efficiency after 500 cycles realized enhanced reversibility using the labile coordination interphase. A lean-electrolyte full cell using only 10 µL mAh-1 electrolyte is also demonstrated with an elongated lifespan of 100 cycles, five times longer than bare Zn anodes. The cell offers a higher energy density than most existing aqueous batteries. This study presents a proof-of-concept design for low-electrolyte, high-energy-density batteries by modulating coordination interphases on Zn anodes.

Lithium Storage Mechanism: A Review of Perylene Diimide N-Substituted with a 1,2,4-Triazol-3-yl Ring for Organic Cathode Materials

The demand for lithium-ion batteries (LIBs) has increased rapidly. However, commercial inorganic-based cathode materials have a low theoretical capacity and inherent disadvantages, such as high cost and toxicity. Redox-active organic cathodes with a high theoretical capacity, eco-friendly properties, and sustainability have been developed to overcome these limitations. Herein, perylene diimide derivatives N-substituted with 1,2,4-triazol-3-yl rings (PDI-3AT) were developed to apply as a cathode material for LIBs. The PDI-3AT cathode exhibited discharge capacities of 85.2 mAh g-1 (50 mA g-1 over 100 cycles) and 64.5 mAh g-1 (500 mA g-1 over 1000 cycles) with ratios to the theoretical capacities of 84 and 64%, respectively. Electrochemical kinetics analysis showed capacitive behaviors of the PDI-3AT cathode with efficient pathways for lithium-ion transport. Also, the activation step of the PDI-3AT cathode was demonstrated by improving the charge transfer resistance and lithium-ion diffusion coefficient during the initial few charge-discharge cycles. Furthermore, DFT calculations at the B3LYP/6-311+G** level and ex situ analysis of various charge states of the PDI-3AT electrode using attenuated total reflection Fourier transform infrared (ATR FT-IR) analysis, X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) were conducted for the further study of the lithium-ion storage mechanism. The results showed that the lithiation process formed the lithium enolate (═C-O-Li) coordinated with the N atoms of the 1,2,4-triazole ring. It is expected that our study results will encourage the production and use of redox-active perylene diimide derivatives as next-generation cathode materials.

Dielectric Filler-Induced Hybrid Interphase Enabling Robust Solid-State Li Metal Batteries at High Areal Capacity

The fillers in composite solid-state electrolyte are mainly responsible for the enhancement of the conduction of Li ions but barely regulate the formation of solid electrolyte interphase (SEI). Herein, a unique filler of dielectric NaNbO3 for the poly(vinylidene fluoride) (PVDF)-based polymer electrolyte, which is subjected to the exchange of Li+ and Na+ during cycling, is reported and the substituted Na+ is engaged in the construction of a fluorinated Li/Na hybrid SEI with high Young's modulus, facilitating the fast transport of Li+ at the interface at a high areal capacity and suppressing the Li dendrite growth. The dielectric NaNbO3 also induces the generation of high-dielectric β phase of PVDF to promote the dissociation of Li salt. The Li/Li symmetrical cell exhibits a long-term dendrite-free cycling over 600 h at a high areal capacity of 3 mA h cm-2 . The LiNi0.8 Mn0.1 Co0.1 O2 /Li solid-state cells with NaNbO3 stably cycle 2200 times at 2 C and that paired with high-loading cathode (10 mg cm-2 ) can stably cycle for 150 times and exhibit excellent performances at -20 °C. This work provides a novel design principle of fillers undertaking interfacial engineering in composite solid-state electrolytes for developing the safe and stable solid-state lithium metal battery.

Ultra-Sleek High Entropy Alloy Tights: Realizing Superior Cyclability for Anode-Free Battery

The development of Li-free anodes to inhibit Li dendrite formation and provide high energy density Li batteries is highly applauded. However, the lithiophobic interphase and heterogeneous Li deposition hindered the practical application. In this work, a 20 nm ultra-sleek high entropy alloy (HEA, NiCdCuInZn) tights loaded with HEA nanoparticles are developed by a thermodynamically driven phase transition method on the carbon fiber (HEA/C). Multiple Li+ transport paths and abundant active sites are enabled by the cocktail effect of different constituent elements in HEA. These active sites with gradient absorption energies (-3.18 to -2.03 eV) facilitate selective binding, providing a low barrier for homogeneous Li nucleation. Simultaneously, multiple transport paths promote Li diffusion behavior with uniform Li deposition. Thus, the HEA/C achieves high reversibility of Li plating/stripping processes over 2000 cycles with a coulombic efficiency of 99.6% at 5 mA cm-2 /1 mAh cm-2 in asymmetric cells, as well as over 7200 h at 60 mA cm-2 /60 mAh cm-2 in symmetric cells. Moreover, the anode-free full cell with the HEA/C host has an average coulombic efficiency of 99.5% at 1 C after 160 cycles. This advanced HEA structure design shows a favorable potential application for anode-free Li metal batteries.

High-Rate Lithium-Selenium Batteries Boosted by a Multifunctional Janus Separator Over a Wide Temperature Range of -30 °C to 60 °C

Lithium-selenium batteries are characterized by high volumetric capacity comparable to Li-S batteries, while ≈1025 times higher electrical conductivity of Se than S is favorable for high-rate capability. However, they also suffer from the "shuttling effect" of lithium polyselenides (LPSes) and Li dendrite growth. Herein, a multifunctional Janus separator is designed by coating hierarchical nitrogen-doped carbon nanocages (hNCNC) and AlN nanowires on two sides of commercial polypropylene (PP) separator to overcome these hindrances. At room temperature, the Li-Se batteries with the Janus separator exhibit an unprecedented high-rate capability (331 mAh g-1 at 25 C) and retain a high capacity of 408 mAh g-1 at 3 C after 500 cycles. Moreover, the high retained capacities are achieved over a wide temperature range from -30 °C to 60 °C, showing the potential application under extreme environments. The excellent performances result from the "1+1>2" synergism of suppressed LPSes shuttling by chemisorption and electrocatalysis of hNCNC on the cathode side and suppressed Li-dendrite growth by thermally conductive AlN-network on the anode side, which can be well understood by the "Bucket Effect". This Janus separator provides a general strategy to develop high-performance lithium-chalcogen (Se, S, SeS2 ) batteries.

Building Ion-Conductive Supramolecular Elastomeric Protective Layer via Dynamic Hard Domain Design for Stable Zinc Metal Anodes

The instability of zinc metal anode caused by zinc dendrite growth and severe parasitic reactions has significantly restricted the extensive application of rechargeable aqueous zinc-ion batteries (RAZBs). Herein, based on the strategy of dynamic hard domains, we develop an ion-conductive supramolecular elastomer consisting of Zn salts and the polyurethane-urea-polypropylene glycol polymer skeleton. This elastomer combines high mechanical strength, high ionic conductivity, decent hydrophobicity, and high adhesion to stabilize the electrode-electrolyte interface. In the elastomer system, this elastomer can dynamically adapt to the volume changes of Zn anodes during repeated zinc plating/stripping processes through the reversible dissociation/reassociation of hierarchical hydrogen bonds (H-bonds) formed by the polar groups of urea and urethane moieties. Meanwhile, the coordination of Zn2+ with soft polypropylene glycol (PPG) segments contributes to fast ion transport. This hydrophobic elastomer can also effectively inhibit water-induced corrosion by shielding the active Zn metal from the aqueous electrolyte. Based on the above synergies, the surface-modified anode shows excellent cycling stability above 550 h at a high current density of 5 mA cm-2 and a capacity of 2.5 mAh cm-2. Moreover, the assembled Zn//MnO2 full cell also displayed an enhanced electrochemical performance. This work provides inspiration for the design of solid electrolyte interphase (SEI) layers in aqueous battery chemistry to accelerate the application of RAZBs.

Hybrid Polymer-Alloy-Fluoride Interphase Enabling Fast Ion Transport Kinetics for Low-Temperature Lithium Metal Batteries

Low-temperature lithium metal batteries are of vital importance for cold-climate condition applications. Their realization, however, is plagued by the extremely sluggish Li+ transport kinetics in the vicinity of Li metal anode at low temperatures. Different from the widely adopted electrolyte engineering, a functional interphase design concept is proposed in this work to efficiently improve the low-temperature electrochemical reaction kinetics of Li metal anodes. As a proof of concept, we design a hybrid polymer-alloy-fluoride (PAF) interphase featuring numerous gradient fluorinated solid-solution alloy composite nanoparticles embedded in a polymerized dioxolane matrix. Systematic experimental and theoretical investigations demonstrate that the hybrid PAF interphase not only exhibits superior lithiophilicity but also provides abundant ionic conductive pathways for homogeneous and fast Li+ transport at the Li-electrolyte interface. With enhanced interfacial dynamics of Li-ion migration, the as-designed PAF-Li anode works stably for 720 h with low voltage hysteresis and dendrite-free electrode morphology in symmetric cell configurations at -40 °C. The full cells with PAF-Li anode display a commercial-grade capacity of 4.26 mAh cm-2 and high capacity retention of 74.7% after 150 cycles at -20 °C. The rational functional interphase design for accelerating ion-transfer kinetics sheds innovative insights for developing high-areal-capacity and long-lifespan lithium metal batteries at low temperatures.

A Three-Dimensional (3D) Framework of Freestanding Vanadium Nitride Nanowires for Dendrite-Free and Long Life-Span Lithium Metal Anodes

Lithium (Li) metal is a promising anode candidate for high-energy-density batteries owing to its high theoretical capacity and low electrochemical potential. However, uneven Li nucleation, uncontrollable dendritic growth, infinite voltage change and even safety issues hinder its commercial application. Herein, a three-dimensional (3D) framework of freestanding vanadium nitride nanowires (VN NWs) is established as Li host for dendrite-free Li metal anode. A lithiophilic Li3 N interlayer which in situ formed by the surface reaction between molten Li and VN NWs is utilized to guide a uniform Li nucleation and deposition within the skeleton, as well as avoid the dendrite formation. Meanwhile, VN NWs can decrease local current density, homogenize Li-ion flux and accommodate volume fluctuations of the anode due to its 3D structure with high electron conductivity. Thus, the corresponding composite Li metal anode delivers a long-life span of 500 cycles (1000 h) at a current density of 0.5 mA cm-2 , and exhibits lower nucleation over-potential and voltage hysteresis at different current densities from 0.5~5 mA cm-2 in carbonate electrolyte. In conclusion, this work provides a new type of scaffold with both high electronic conductivity and excellent lithiophilicity for stable Li anodes.