Well-defined nickel and palladium precatalysts for cross-coupling

Expedited Aminoglutarimide C-N Cross-Coupling Enabled by High-Throughput Experimentation

A simple protocol for the Buchwald-Hartwig cross-coupling of (hetero)aryl halides with unprotected aminoglutarimide to afford diverse cereblon binding motifs is disclosed. The development of this C-N cross-coupling method was enabled by high-throughput combinatory screening of solvents, bases, temperatures, and ligands. Scope studies revealed generality across various heteroaryl and aryl halides with the reaction proceeding under mild conditions. In comparison, this method demonstrated strategic superiority over previously reported approaches, as evidenced by a significant decrease in step count from known syntheses in the patent literature.

The role of the stabilizing/leaving group in palladium catalysed cross-coupling reactions

Despite the widespread use of well-defined PdII complexes as pre-catalysts for cross-coupling processes, the role of the throw-away ligand is still underexplored. In this work we focused on the complexes of the type [Pd(NHC)(η3-R-allyl)Cl] (NHC = N-heterocyclic carbene) and we investigated the influence of the R substitution on the allyl moiety. Starting from the already described [Pd(IPr)(η3-cinnamyl)Cl] and [Pd(IPr*)(η3-cinnamyl)Cl] (IPr = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene, IPr* = N,N'-1,3-bis[2,6-bis(diphenylmethyl)-4-methylphenyl]imidazol-2-ylidene) we prepared eight new complexes bearing new substitutions on the cinnamyl motif and we tested them in the C-N bond formation to evaluate the effect of the throw-away ligand modification in the catalytic activity. In addition, we studied the undesired formation of the less active off-cycle [PdI2(NHC)2(η3-R-allyl)(μ-Cl)] dimers from the corresponding PdII complexes to evaluate the role of the new throw-away ligands on the inhibition of this process.

Deactivation Modes in Nickel-Mediated Suzuki-Miyaura Cross-Coupling Reactions Using an NHC-Pyridonate Ligand

The catalytic activity of an NHC-pyridonate-supported nickel(0) complex for Suzuki-Miyaura coupling of aryl halides was evaluated. Product formation was observed in the absence of a basic additive. However, low turnover numbers resulted from competitive catalyst deactivation. The nature of deactivation-dimerization of the nickel(II) aryl intermediate-was elucidated through a combination of NMR monitoring, direct synthesis, and X-ray diffraction. Lewis basic and Lewis acidic additives were evaluated with the goal of improving the stability of the nickel(II) aryl intermediate but failed to enable catalytic turnover. Taken together, these findings highlight both the promise and the pitfalls associated with incorporating secondary-sphere Lewis basic groups for cooperative catalysis.

Alkali-metal nickelates: catalytic cross-coupling, clusters and coordination complexes

Alkali-metal nickelates are a class of highly reactive heterobimetallic complexes derived from Ni(0)-olefins and polar organo-alkali-metal reagents. First reported over 50 years ago, it is only in recent years that these overlooked complexes have found formidable roles in sustainable catalysis and beyond. In this article, we will showcase the emerging catalytic applications of lithium nickelates and discuss the mechanisms by which these heterobimetallic complexes facilitate challenging cross-coupling reactions. We will also review the unique structure and bonding of alkali-metal nickelates, as interrogated by X-ray crystallography and complementary bonding analysis, and finally explore the diverse coordination and co-complexation chemistry of these heterobimetallic complexes.

Leveraging natural language processing to curate the tmCAT, tmPHOTO, tmBIO, and tmSCO datasets of functional transition metal complexes

The breadth of transition metal chemical space covered by databases such as the Cambridge Structural Database and the derived computational database tmQM is not conducive to application-specific modeling and the development of structure-property relationships. Here, we employ both supervised and unsupervised natural language processing (NLP) techniques to link experimentally synthesized compounds in the tmQM database to their respective applications. Leveraging NLP models, we curate four distinct datasets: tmCAT for catalysis, tmPHOTO for photophysical activity, tmBIO for biological relevance, and tmSCO for magnetism. Analyzing the chemical substructures within each dataset reveals common chemical motifs in each of the designated applications. We then use these common chemical structures to augment our initial datasets for each application, yielding a total of 21 631 compounds in tmCAT, 4599 in tmPHOTO, 2782 in tmBIO, and 983 in tmSCO. These datasets are expected to accelerate the more targeted computational screening and development of refined structure-property relationships with machine learning.

Mapping Electrophile Chemoselectivity in DalPhos/Nickel N-Arylation Catalysis: The Unusual Influence of Remote Sterics

We disclose herein our evaluation of competitive (hetero)aryl-X (X: Br>Cl>OTf) reactivity preferences in bisphosphine/Ni-catalyzed C-N cross-coupling catalysis, using furfurylamine as a prototypical nucleophile, and employing DalPhos and DPPF as representative ancillary ligands with established efficacy. Beyond this general (pseudo)halide ranking, other intriguing structure-reactivity trends were noted experimentally, including the unexpected observation that bulky alkyl (e. g., R=tBu) substitution in para-R-aryl-X electrophiles strongly discourages (pseudo)halide reactivity relative to smaller substituents (e. g., nBu, Et, Me), despite being both remote from, and having a similar electronic influence on, the reacting C-X bond; such effects on nickel oxidative addition have not been documented previously and were not observed in our comparator reactions presented herein involving palladium. Density functional theory modeling of such PhPAd-DalPhos/Ni-catalyzed C-N cross-couplings revealed the origins of competitive turnover of C-Br over C-Cl, and possible ways in which bulky para-alkyl substitution might discourage net electrophile uptake/turnover, leading to inversion of halide selectivity.

The Progress of Reductive Coupling Reaction by Iron Catalysis

The transition metal catalyzed coupling reaction has revolutionized the strategies for forging the carbon-carbon bonds. In contrast to traditional cross-coupling methods using pre-prepared nucleophilic organometallic reagents, reductive coupling reactions for the C-C bonds formation provide some advantages. Because both coupling partners are reduced in the final products using a stoichiometric amount of a reductant, this approach not only avoids the need to use sensitive organometallic species, but also provides an orthogonal and complementary access to classical coupling reaction. Notably, the reductive coupling reactions feature readily available fragments, promote good step economy, exhibit high functional group tolerance and unique chemoselectivity, which have propelled their increasingly popular in the organic synthesis. In recent years, due to the low price, minimal toxicity, and environmentally benign character, iron-catalyzed carbon-carbon coupling reactions have garnered significant attention from the organic synthetic chemists and pharmacologists, especially the iron-catalyzed reductive coupling. This review aims to provide an insightful overview of recent advances in iron-catalyzed reductive coupling reactions, and to illustrate their possible reaction mechanisms.

Strategies and Mechanisms of First-Row Transition Metal-Regulated Radical C-H Functionalization

Radical C-H functionalization represents a useful means of streamlining synthetic routes by avoiding substrate preactivation and allowing access to target molecules in fewer steps. The first-row transition metals (Ti, V, Cr, Mn, Fe, Co, Ni, and Cu) are Earth-abundant and can be employed to regulate radical C-H functionalization. The use of such metals is desirable because of the diverse interaction modes between first-row transition metal complexes and radical species including radical addition to the metal center, radical addition to the ligand of metal complexes, radical substitution of the metal complexes, single-electron transfer between radicals and metal complexes, hydrogen atom transfer between radicals and metal complexes, and noncovalent interaction between the radicals and metal complexes. Such interactions could improve the reactivity, diversity, and selectivity of radical transformations to allow for more challenging radical C-H functionalization reactions. This review examines the achievements in this promising area over the past decade, with a focus on the state-of-the-art while also discussing existing limitations and the enormous potential of high-value radical C-H functionalization regulated by these metals. The aim is to provide the reader with a detailed account of the strategies and mechanisms associated with such functionalization.

Nickel-catalyzed, silyl-directed, ortho-borylation of arenes via an unusual Ni(II)/Ni(IV) catalytic cycle

Nickel-catalyzed C-H bond functionalization reactions provide an impressive alternative to those with noble metal catalysts due to their unique reactivity and low cost. However, the regioselective C(sp2)-H borylation reaction of arenes accomplished by nickel catalyst remains limited. We herein disclose a silyl-directed ortho C(sp2)-H borylation of substituted arenes with a Ni(cod)2/PMe3/KHMDS catalyst system. Using readily available starting materials, this protocol provides easy access to ortho-borylated benzylic hydrosilanes bearing flexible substitution patterns. These products can serve as versatile building blocks for the synthesis of sila or sila/borine heterocycles under mild conditions. Control experiments and DFT calculations suggest that a catalytic amount of base prompts the formation of Ni(II)-Bpin-ate complex, likely related to the C(sp2)-H bond activation. This borylation reaction might follow an unusual Ni(II)/Ni(IV) catalytic cycle.

Nickel Catalyzed Carbonylative Cross Coupling for Direct Access to Isotopically Labeled Alkyl Aryl Ketones

Here we present an effective nickel-catalyzed carbonylative cross-coupling for direct access to alkyl aryl ketones from readily accessible redox-activated tetrachlorophthalimide esters and aryl boronic acids. The methodology, which is run employing only 2.5 equivalents of CO and simple Ni(II) salts as the metal source, exhibits a broad substrate scope under mild conditions. Furthermore, this carbonylation chemistry provides an easy switch between isotopologues for stable (13CO) and radioactive (14CO) isotope labeling, allowing its adaptation to the late-stage isotope labeling of pharmaceutically relevant compounds. Based on DFT calculations as well as experimental evidence, a catalytic cycle is proposed involving a carbon-centered radical formed via nickel(I)-induced outer-sphere decarboxylative fragmentation of the redox-active ester.

Late-Stage C(sp2)-C(sp3) Diversification via Nickel Oxidative Addition Complexes

Herein, we describe nickel oxidative addition complexes (Ni-OACs) of drug-like molecules as a platform to rapidly generate lead candidates with enhanced C(sp3) fraction. The potential of Ni-OACs to access new chemical space has been assessed not only in C(sp2)-C(sp3) couplings but also in additional bond formations without recourse to specialized ligands and with improved generality when compared to Ni-catalyzed reactions. The development of an automated diversification process further illustrates the robustness of Ni-OACs, thus offering a new gateway to expedite the design-make-test-analyze (DMTA) cycle in drug discovery.

Mechanistic insights into facilitating reductive elimination from Ni(II) species

Reductive elimination is a key step in Ni-catalysed cross-couplings, which is often considered to result in new covalent bonds. Due to the weak oxidizing ability of Ni(II) species, reductive eliminations from Ni(II) centers are challenging. A thorough mechanistic understanding of this process could inspire the rational design of Ni-catalysed coupling reactions. In this article, we give an overview of recent advances in the mechanistic study of reductive elimination from Ni(II) species achieved by our group. Three possible models for reductive elimination from Ni(II) species were investigated and discussed, including direct reductive elimination, electron density-controlled reductive elimination, and oxidation-induced reductive elimination. Notably, the direct reductive elimination from Ni(II) species often requires a high activation energy in some cases. In contrast, the electron density-controlled and oxidation-induced reductive elimination pathways can significantly enhance the driving force for reductive elimination, accelerating the formation of new covalent bonds. The intricate reaction mechanisms for each of these pathways are thoroughly discussed and systematically summarized in this paper. These computational studies showcase the characteristics of three models for reductive elimination from Ni(II) species, and we hope that it will spur the development of mechanistic studies of cross-coupling reactions.

Cooperative Phosphine-Photoredox Catalysis Enables N-H Activation of Azoles for Intermolecular Olefin Hydroamination

Catalytic intermolecular olefin hydroamination is an enabling synthetic strategy that offers direct and atom-economical access to a variety of nitrogen-containing compounds from abundant feedstocks. However, despite numerous advances in catalyst design and reaction development, hydroamination of N-H azoles with unactivated olefins remains an unsolved problem in synthesis. We report a dual phosphine and photoredox catalytic protocol for the hydroamination of numerous structurally diverse and medicinally relevant N-H azoles with unactivated olefins. Hydroamination proceeds with high anti-Markovnikov regioselectivity and N-site selectivity. The mild conditions and high functional group tolerance of the reaction permit the rapid construction of molecular complexity and late-stage functionalization of bioactive compounds. N-H bond activation is proposed to proceed via polar addition of the N-H azole to a phosphine radical cation, followed by P-N α-scission from a phosphoranyl radical intermediate. Reactivity and N-site selectivity are classified by azole N-H BDFE and nitrogen-centered radical spin density, respectively, which can serve as a useful predictive aid in extending the reaction to unseen azoles.

Ni-Catalyzed Kumada-Corriu Cross-Coupling Reactions of Tertiary Grignard Reagents and Bromostyrenes

The development of protocols for the construction of congested quaternary centers is highly sought-after. Herein, we report a method for the cross-coupling of C(sp3) tertiary Grignard reagents with C(sp2) styrenyl bromides using readily available nickel precatalysts. We identified conditions that afford the products in practical yield for several combinations of electrophiles and nucleophiles, including sensitive α-magnesiated Grignard reagents. Dependent upon the nature of their substituents, regiodivergency was observed when α-vinyl bromides were employed.

Will We Witness Enzymatic or Pd-(Oligo)Peptide Catalysis in Suzuki Cross-Coupling Reactions?

Despite the development of numerous advanced ligands for Pd-catalyzed Suzuki cross-coupling reaction, the potential of (oligo)peptides serving as ligands remains unexplored. This study demonstrates via density functional theory (DFT) modeling that (oligo)peptide ligands can drive superior activity compared to classic phosphines in these reactions. The utilization of natural amino acids such as Met, SeMet, and His leads to strong binding of the Pd center, thereby ensuring substantial stability of the system. The increasing sustainability and economic viability of (oligo)peptide synthesis open new prospects for applying Pd-(oligo)peptide systems as greener catalysts. The feasibility of de novo engineering an artificial Pd-based enzyme for Suzuki cross-coupling is discussed, laying the groundwork for future innovations in catalytic systems.

Design and discovery of anthranilamide derivatives as a potential treatment for neurodegenerative disorders via targeting cholinesterases and monoamine oxidases

Neurodegenerative diseases with progressive cellular loss of the central nervous system and elusive disease etiology provide a continuous impetus to explore drug discovery programmes aiming at identifying robust and effective inhibitors of cholinesterase and monoamine oxidase enzymes. We herein present a concise library of anthranilamide derivatives involving a palladium-catalyzed Suzuki-Miyaura cross-coupling reaction to install the diverse structural diversity required for the desired biological action. Using Ellman's method, cholinesterase inhibitory activity was performed against AChE and BuChE enzymes. In vitro assay results demonstrated that anthranilamides are potent inhibitors with remarkable potency. Compound 6k emerged as the lead candidate and dual inhibitor of both enzymes with IC50 values of 0.12 ± 0.01 and 0.49 ± 0.02 μM against AChE and BuChE, respectively. Several other compounds were found as highly potent and selective inhibitors. Anthranilamide derivatives were also tested against monoamine oxidase (A and B) enzymes using fluorometric method. In vitro data revealed compound 6h as the most potent inhibitor against MAO-A, showing an IC50 value of 0.44 ± 0.02 μM, whereas, compound 6k emerged as the top inhibitor of MAO-B with an IC50 value of 0.06 ± 0.01 μM. All the lead inhibitors were analyzed for the identification of their mechanism of action using Michaelis-Menten kinetics experiments. Compound 6k and 6h depicted a competitive mode of action against AChE and MAO-A, whereas, a non-competitive and mixed-type of inhibition was observed against BuChE and MAO-B by compounds 6k. Molecular docking analysis revealed remarkable binding affinities of the potent inhibitors with specific residues inside the active site of receptors. Furthermore, molecular dynamics simulations were performed to explore the ability of potent compounds to form energetically stable complexes with the target protein. Finally, in silico ADME calculations also demonstrated that the potent compounds exhibit promising pharmacokinetic profile, satisfying the essential criteria for drug-likeness. Altogether, the findings reported in the current work clearly suggest that the identified anthranilamide derivatives have the potential to serve as effective drug candidates for future investigations.

Electro/Ni Dual-Catalyzed Decarboxylative C(sp3)-C(sp2) Cross-Coupling Reactions of Carboxylates and Aryl Bromide

Paired redox-neutral electrolysis offers an attractive green platform for organic synthesis by avoiding sacrificial oxidants and reductants. Carboxylates are non-toxic, stable, inexpensive, and widely available, making them ideal nucleophiles for C-C cross-coupling reactions. Here, we report the electro/Ni dual-catalyzed redox-neutral decarboxylative C(sp3)-C(sp2) cross-coupling reactions of pristine carboxylates with aryl bromides. At a cathode, a NiII(Ar)(Br) intermediate is formed through the activation of Ar-Br bond by a NiI-bipyridine catalyst and subsequent reduction. At an anode, the carboxylates, including amino acid, benzyl carboxylic acid, and 2-phenoxy propionic acid, undergo oxidative decarboxylation to form carbon-based free radicals. The combination of NiII(Ar)(Br) intermediate and carbon radical results in the formation of C(sp3)-C(sp2) cross-coupling products. The adaptation of this electrosynthesis method to flow synthesis and valuable molecule synthesis was demonstrated. The reaction mechanism was systematically studied through electrochemical voltammetry and density functional theory (DFT) computational studies. The relationships between the electrochemical properties of carboxylates and the reaction selectivity were revealed. The electro/Ni dual-catalyzed cross-coupling reactions described herein expand the chemical space of paired electrochemical C(sp3)-C(sp2) cross-coupling and represent a promising method for the construction of the C(sp3)-C(sp2) bonds because of the ubiquitous carboxylate nucleophiles and the innate scalability and flexibility of electrochemical flow-synthesis technology.

The development of cage phosphine 'DalPhos' ligands to enable nickel-catalyzed cross-couplings of (hetero)aryl electrophiles

Nickel-catalyzed cross-couplings of (hetero)aryl electrophiles with a diversity of nucleophiles (nitrogen, oxygen, carbon, and others) have evolved into competitive alternatives to well-established palladium- and copper-based protocols for the synthesis of (hetero)aryl products, including (hetero)anilines and (hetero)aryl ethers. A survey of the literature reveals that the use of cage phosphine (CgP) 'DalPhos' (DALhousie PHOSphine) bisphosphine-type ligands operating under thermal conditions currently offers the most broad substrate scope in nickel-catalyzed cross-couplings of this type, especially involving (hetero)aryl chlorides and phenol-derived electrophiles. The development and application of these DalPhos ligands is described in a ligand-specific manner that is intended to serve as a guide for the synthetic chemistry end-user.

Effect of 6,6'-Substituents on Bipyridine-Ligated Ni Catalysts for Cross-Electrophile Coupling

A family of 4,4'-tBu2-2,2'-bipyridine (tBubpy) ligands with substituents in either the 6-position, 4,4'-tBu2-6-Me-bpy (tBubpyMe), or 6 and 6'-positions, 4,4'-tBu2-6,6'-R2-bpy (tBubpyR2; R = Me, iPr, sBu, Ph, or Mes), was synthesized. These ligands were used to prepare Ni complexes in the 0, I, and II oxidation states. We observed that the substituents in the 6 and 6'-positions of the tBubpy ligand impact the properties of the Ni complexes. For example, bulkier substituents in the 6,6'-positions of tBubpy better stabilized (tBubpyR2)NiICl species and resulted in cleaner reduction from (tBubpyR2)NiIICl2. However, bulkier substituents hindered or prevented coordination of tBubpyR2 ligands to Ni0(cod)2. In addition, by using complexes of the type (tBubpyMe)NiCl2 and (tBubpyR2)NiCl2 as precatalysts for different XEC reactions, we demonstrated that the 6 or 6,6' substituents lead to major differences in catalytic performance. Specifically, while (tBubpyMe)NiIICl2 is one of the most active catalysts reported to date for XEC and can facilitate XEC reactions at room temperature, lower turnover frequencies were observed for catalysts containing tBubpyR2 ligands. A detailed study on the catalytic intermediates (tBubpy)Ni(Ar)I and (tBubpyMe2)Ni(Ar)I revealed several factors that likely contributed to the differences in catalytic activity. For example, whereas complexes of the type (tBubpy)Ni(Ar)I are low spin and relatively stable, complexes of the type (tBubpyMe2)Ni(Ar)I are high-spin and less stable. Further, (tBubpyMe2)Ni(Ar)I captures primary and benzylic alkyl radicals more slowly than (tBubpy)Ni(Ar)I, consistent with the lower activity of the former in catalysis. Our findings will assist in the design of tailor-made ligands for Ni-catalyzed transformations.

General room-temperature Suzuki-Miyaura polymerization for organic electronics

π-Conjugated polymers (CPs) have broad applications in high-performance optoelectronics, energy storage, sensors and biomedicine. However, developing green and efficient methods to precisely synthesize alternating CP structures on a large scale remains challenging and critical for their industrialization. Here a room-temperature, scalable and homogeneous Suzuki-Miyaura-type polymerization reaction is developed with broad generality validated for 24 CPs including donor-donor, donor-acceptor and acceptor-acceptor connectivities, yielding device-quality polymers with high molecular masses. Furthermore, the polymerization protocol significantly reduces homocoupling structural defects, yielding more structurally regular and higher-performance electronic materials and optoelectronic devices than conventional thermally activated polymerizations. Experimental and theoretical studies reveal that a borate transmetalation process plays a key role in suppressing protodeboronation, which is critical for large-scale structural regularity. Thus, these results provide a general polymerization tool for the scalable production of device-quality CPs with alternating structural regularity.

Insights into Recent Nickel-Catalyzed Reductive and Redox C-C Coupling of Electrophiles, C(sp3)-H Bonds and Alkenes

ConspectusTransition metal-catalyzed reductive cross-coupling of two carbon electrophiles, also known as cross-electrophile coupling (XEC), has transformed the landscape of C-C coupling chemistry. Nickel catalysts, in particular, have demonstrated exceptional performance in facilitating XEC reactions, allowing for diverse elegant transformations by employing various electrophiles to forge C-C bonds. Nevertheless, several crucial challenges remain to be addressed. First, the intrinsic chemoselectivity between two structurally similar electrophiles in Ni-catalyzed C(sp3)-C(sp3) and C(sp2)-C(sp2) cross-coupling has not been well understood; this necessitates an excess of one of the coupling partners to achieve synthetically useful outcomes. Second, the substitution of economically and environmentally benign nonmetal reductants for Zn/Mn can help scale up XEC reactions and avoid trace metals in pharmaceutical products, but research in this direction has progressed slowly. Finally, it is highly warranted to leverage mechanistic insights from Ni-catalyzed XEC to develop innovative thermoredox coupling protocols, specifically designed to tackle challenges associated with difficult substrates such as C(sp3)-H bonds and unactivated alkenes.In this Account, we address the aforementioned issues by reviewing our recent work on the reductive coupling of C-X and C-O electrophiles, the thermoredox strategy for coupling associated with C(sp3)-H bonds and unactivated alkenes, and the use of diboron esters as nonmetal reductants to achieve reductive coupling. We focus on the mechanistic perspectives of the transformations, particularly how the key C-NiIII-C intermediates are generated, in order to explain the chemoselective and regioselective coupling results. The Account consists of four sections. First, we discuss the Zn/Mn-mediated chemoselective C(sp2)-C(sp2) and C(sp3)-C(sp3) bond formations based on the coupling of selected alkyl/aryl, allyl/benzyl, and other electrophiles. Second, we describe the use of diboron esters as versatile reductants to achieve C(sp3)-C(sp3) and C(sp3)-C(sp2) couplings, with an emphasis on the mechanistic consideration for the construction of C(sp3)-C(sp2) bonds. Third, we discuss leveraging C(sp3)-O bonds for effective C(sp3)-C bond formation via in situ halogenation of alcohols as well as the reductive preparation of α-vinylated and -arylated unusual amino esters. In the final section, we illustrate the thermoredox functionalization of challenging C(sp3)-H bonds with aryl and alkyl halides to afford C(sp3)-C bonds by taking advantage of the compatibility of Zn with the oxidant di-tert-butylperoxide (DTBP). Furthermore, we discuss a Ni-catalyzed and SiH/DTBP-mediated hydrodimerization of terminal alkenes to selectively forge head-to-head and methyl branched C(sp3)-C(sp3) bonds. This process, conducted in the presence or absence of catalytic CuBr2, provides a solution to a long-standing challenge: site-selective hydrocoupling of unactivated alkenes to produce challenging C(sp3)-C(sp3) bonds.

From Frank-Kasper, Quasicrystals, and Biological Membrane Mimics to Reprogramming In Vivo the Living Factory to Target the Delivery of mRNA with One-Component Amphiphilic Janus Dendrimers

This Perspective is dedicated to the 25th Anniversary of Biomacromolecules. It provides a personal view on the developing field of the polymer and biology interface over the 25 years since the journal was launched by the American Chemical Society (ACS). This Perspective is meant to bridge an article published in the first issue of the journal and recent bioinspired developments in the laboratory of the corresponding author. The discovery of supramolecular spherical helices self-organizing into Frank-Kasper and quasicrystals as models of icosahedral viruses, as well as of columnar helical assemblies that mimic rodlike viruses by supramolecular dendrimers, is briefly presented. The transplant of these assemblies from supramolecular dendrimers to block copolymers, giant surfactants, and other self-organized soft matter follows. Amphiphilic self-assembling Janus dendrimers and glycodendrimers as mimics of biological membranes and their glycans are discussed. New concepts derived from them that evolved in the in vivo targeted delivery of mRNA with the simplest one-component synthetic vector systems are introduced. Some synthetic methodologies employed during the synthesis and self-assembly are explained. Unraveling bioinspired applications of novel materials concludes this brief 25th Anniversary Perspective of Biomacromolecules.

ProPhos: A Ligand for Promoting Nickel-Catalyzed Suzuki-Miyaura Coupling Inspired by Mechanistic Insights into Transmetalation

Nickel-catalyzed Suzuki-Miyaura coupling (Ni-SMC) offers the potential to reduce the cost of pharmaceutical process synthesis. However, its application has been restricted by challenges such as slow reaction rates, high catalyst loading, and a limited scope of heterocycles. Despite recent investigations, the mechanism of transmetalation in Ni-SMC, often viewed as the turnover-limiting step, remains insufficiently understood. We elucidate the "Ni-oxo" transmetalation pathway, applying PPh2Me as the ligand, and identify the formation of a nickel-oxo intermediate as the turnover-limiting step. Building on this insight, we develop a scaffolding ligand, ProPhos, featuring a pendant hydroxyl group connected to the phosphine via a linker. The design preorganizes both the nucleophile and the nickel catalyst, thereby facilitating transmetalation. This catalyst exhibits fast kinetics and robust activity across a wide range of heteroarenes, with a catalyst loading of 0.5-3 mol %. For arene substrates, the catalyst loading can be further reduced to 0.1 mol %.

Three-Coordinate Nickel and Metal-Metal Interactions in a Heterometallic Iron-Sulfur Cluster

Biological multielectron reactions often are performed by metalloenzymes with heterometallic sites, such as anaerobic carbon monoxide dehydrogenase (CODH), which has a nickel-iron-sulfide cubane with a possible three-coordinate nickel site. Here, we isolate the first synthetic iron-sulfur clusters having a nickel atom with only three donors, showing that this structural feature is feasible. These have a core with two tetrahedral irons, one octahedral tungsten, and a three-coordinate nickel connected by sulfide and thiolate bridges. Electron paramagnetic resonance (EPR), Mössbauer, and superconducting quantum interference device (SQUID) data are combined with density functional theory (DFT) computations to show how the electronic structure of the cluster arises from strong magnetic coupling between the Ni, Fe, and W sites. X-ray absorption spectroscopy, together with spectroscopically validated DFT analysis, suggests that the electronic structure can be described with a formal Ni1+ atom participating in a nonpolar Ni-W σ-bond. This metal-metal bond, which minimizes spin density at Ni1+, is conserved in two cluster oxidation states. Fe-W bonding is found in all clusters, in one case stabilizing a local non-Hund state at tungsten. Based on these results, we compare different M-M interactions and speculate that other heterometallic clusters, including metalloenzyme active sites, could likewise store redox equivalents and stabilize low-valent metal centers through metal-metal bonding.

Palladium N-Heterocyclic Carbene-Catalyzed Aminations: An Outline

Amination reactions play a pivotal role in synthetic organic chemistry, facilitating the generation of nitrogen-containing scaffolds with broad applications in drug synthesis, material production, polymer formation, and the generation of amino acids and peptides. Amination offers the potential to fine tune the properties of natural products and produce functional materials for various applications. Palladium N-heterocyclic carbene (Pd-NHC) emerges as an innovative and highly effective catalyst in this context. Under favorable reaction conditions, this robust and simple catalyst efficiently facilitates the synthesis of a diverse range of compounds with varying complexity and utility. Pd-NHC complexes exhibit significant σ-electron donating potential, enhancing the ease of the oxidative addition process in their mechanistic pathway. Their steric topography further contributes to a rapid reductive elimination. These complexes demonstrate remarkable stability, a result of the strong Pd-ligand bond. The wide variety of Pd-NHC complexes has proven highly efficient in catalyzing reactions across a spectrum of complexities, from simple to intricate. The domain of aminations catalyzed by Pd-NHC has undergone significant diversification, presenting new opportunities, particularly in the realms of material chemistry and natural product synthesis. This review outlines the advancements in Pd-NHC-catalyzed amination reactions, covering literature up to date.

Chiral, air stable, and reliable Pd(0) precatalysts applicable to asymmetric allylic alkylation chemistry

Stereoselective carbon-carbon bond formation via palladium-catalyzed asymmetric allylic alkylation is a crucial strategy to access chiral natural products and active pharmaceutical ingredients. However, catalysts based on the privileged Trost and Pfaltz-Helmchen-Williams PHOX ligands often require high loadings, specific preactivation protocols, and excess chiral ligand. This makes these reactions uneconomical, often unreproducible, and thus unsustainable. Here we report several chiral single-component Pd(0) precatalysts that are active and practically-applicable in a variety of asymmetric allylic alkylation reactions. Despite the decades-long history and widespread use of Trost-type ligands, the precatalysts in this work are the only reported examples of stable, isolable Pd(0) complexes with these ligands. Evaluating these precatalysts across nine asymmetric allylic alkylation reactions reveals high reactivity and selectivity at low Pd loading. Importantly, we also report an unprecedented Pd-catalyzed enantioselective allylation of a hydantoin, achieved on gram scale in high yield and enantioselectivity with only 0.2 mol% catalyst.

Pyrimidine-morpholine hybrids as potent druggable therapeutics for Alzheimer's disease: Synthesis, biochemical and in silico analyses

The identification of effective and druggable cholinesterase inhibitors to treat progressive neurodegenerative Alzheimer's disorder remains a continuous drug discovery hunt. In this perspective, the present study investigates the design and discovery of pyrimidine-morpholine hybrids (5a-l) as potent cholinesterase inhibitors. Palladium-catalyzed Suzuki-Miyaura cross-coupling reaction was employed to introduce the structural diversity on the pyrimidine heterocyclic core. A range of commercially available boronic acids was successfully coupled showing a high functional group tolerance. In vitro cholinesterase inhibitory potential using Ellman's method revealed significantly strong potency. Compound 5h bearing a meta-tolyl substituent at 2-position of pyrimidine ring emerged as a lead candidate against AChE with an inhibitory potency of 0.43 ± 0.42 µM, ∼38-fold stronger value than neostigmine (IC50 = 16.3 ± 1.12 µM). Compound 5h also showed the lead inhibition against BuChE with an IC50 value of 2.5 ± 0.04 µM. The kinetics analysis of 5h revealed the non-competitive mode of inhibition against AChE whereas computational modelling results of potent leads depicted diverse contacts with the binding site amino acid residues. Molecular dynamics simulations revealed the stability of biomolecular system, while, ADME analysis demonstrated druglikeness behaviour of potent compounds. Overall, the investigated pyrimidine-morpholine scaffold presented a remarkable potential to be developed as efficacious anti-Alzheimer's drugs.

Bulky, electron-rich, renewable: analogues of Beller's phosphine for cross-couplings

In recent years, considerable progress has been made in the conversion of biomass into renewable chemicals, yet the range of value-added products that can be formed from biomass remains relatively small. Herein, we demonstrate that molecules available from biomass serve as viable starting materials for the synthesis of phosphine ligands, which can be used in homogeneous catalysis. Specifically, we prepared renewable analogues of Beller's ligand (di(1-adamantyl)-n-butylphosphine, cataCXium® A), which is widely used in homogeneous catalysis. Our new renewable phosphine ligands facilitate Pd-catalysed Suzuki-Miyaura, Stille, and Buchwald-Hartwig coupling reactions with high yields, and our catalytic results can be rationalized based on the stereoelectronic properties of the ligands. The new phosphine ligands generate catalytic systems that can be applied for the late-stage functionalization of commercial drugs.

Heterogenization of molecular catalysts within porous solids: the case of Ni-catalyzed ethylene oligomerization from zeolites to metal-organic frameworks

The last decade has seen a tremendous expansion of the field of heterogenized molecular catalysis, especially with the growing interest in metal-organic frameworks and related porous hybrid solids. With successful achievements in the transfer from molecular homogeneous catalysis to heterogenized processes come the necessary discussions on methodologies used and a critical assessment on the advantages of heterogenizing molecular catalysis. Here we use the example of nickel-catalyzed ethylene oligomerization, a reaction of both fundamental and applied interest, to review heterogenization methodologies of well-defined molecular catalysts within porous solids while addressing the biases in the comparison between original molecular systems and heterogenized counterparts.

Efficient and Direct Functionalization of Allylic sp3 C-H Bonds with Concomitant CO2 Reduction

Solar-driven CO2 reduction integrated with C-C/C-X bond-forming organic synthesis represents a substantially untapped opportunity to simultaneously tackle carbon neutrality and create an atom-/redox-economical chemical synthesis. Herein, we demonstrate the first cooperative photoredox catalysis of efficient and tunable CO2 reduction to syngas, paired with direct alkylation/arylation of unactivated allylic sp3 C-H bonds for accessing allylic C-C products, over SiO2 -supported single Ni atoms-decorated CdS quantum dots (QDs). Our protocol not only bypasses additional oxidant/reductant and pre-functionalization of organic substrates, affording a broad of allylic C-C products with moderate to excellent yields, but also produces syngas with tunable CO/H2 ratios (1 : 2-5 : 1). Such win-win coupling catalysis highlights the high atom-, step- and redox-economy, and good durability, illuminating the tantalizing possibility of a renewable sunlight-driven chemical feedstocks manufacturing industry.

Synthesis of 2-arylpyridines by the Suzuki-Miyaura cross-coupling of PyFluor with hetero(aryl) boronic acids and esters

The Suzuki-Miyaura cross-coupling of pyridine-2-sulfonyl fluoride (PyFluor) with hetero(aryl) boronic acids and pinacol boronic esters is reported. The reactions can be performed using Pd(dppf)Cl2 as the catalyst, at temperatures between 65 and 100 °C and in the presence of water and oxygen. This transformation generates 2-arylpyridines in modest to good yields (5%-89%).

Palladium-Catalyzed Carbonylative Difunctionalization of Unactivated Alkenes Initiated by Unstabilized Enolates

This report describes the first example of palladium-catalyzed carbonylative difunctionalization of unactivated alkenes initiated by enolate nucleophiles. The approach involves initiation by an unstabilized enolate nucleophile under an atmospheric pressure of CO and termination with a carbon electrophile. This process is compatible with a diverse range of electrophiles, including aryl, heteroaryl, and vinyl iodides to yield synthetically useful 1,5-diketone products, which were demonstrated to be precursors for multi-substituted pyridines. A PdI -dimer complex with two bridging CO units was observed although its role in catalysis is not yet understood.

Palladium-catalyzed coupling of amides and cyclopropanols for the synthesis of γ-diketones

A palladium catalytic method has been developed for the coupling of amides and cyclopropanols to γ-diketones, through simultaneous C-N and C-C activation. Heteroatom ligand exchange and heteroatom-to-carbon ligation mode switching enable the achievement of molecular cross-coupling in an amide N-atom structural context-dependent manner, avoiding any stoichiometric organometallic reagent or base.

Asymmetric Hydrative Aldol Reaction (HAR) via Vinyl-Gold Promoted Intermolecular Ynamide Addition to Aldehydes

Herein, we reported an intermolecular asymmetric hydrative aldol reaction through vinyl-gold intermediate under ambient conditions. This tandem alkyne hydration and sequential nucleophilic addition afforded a "base-free" approach to β-hydroxy amides with high efficiency (up to 95 % yields, >50 examples). Vinyl gold intermediate was applied as reactive nucleophile and Fe(acac)3 was used as the critical co-catalyst to prevent undesired protodeauration, allowing this transformation to proceed under mild conditions with good functional group tolerance and excellent stereoselectivity (>20 : 1 d.r. and up to 99 % ee).

Comparison of Monophosphine and Bisphosphine Precatalysts for Ni-Catalyzed Suzuki-Miyaura Cross-Coupling: Understanding the Role of the Ligation State in Catalysis

Practical advances in Ni-catalyzed Suzuki-Miyaura cross-coupling (SMC) have been limited by a lack of mechanistic understanding of phosphine ligand effects. While bisphosphines are commonly used in these methodologies, we have observed instances where monophosphines can provide comparable or higher levels of reactivity. Seeking to understand the role of ligation state in catalysis, we performed a head-to-head comparison study of C(sp2)-C(sp2) Ni SMCs catalyzed by mono and bisphosphine precatalysts using six distinct substrate pairings. Significant variation in optimal precatalyst was observed, with the monophosphine precatalyst tending to outperform the bisphosphines with electronically deactivated and sterically hindered substrates. Mechanistic experiments revealed a role for monoligated (P1Ni) species in accelerating the fundamental organometallic steps of the catalytic cycle, while highlighting the need for bisligated (P2Ni) species to avoid off-cycle reactivity and catalyst poisoning by heterocyclic motifs. These findings provide guidelines for ligand selection against challenging substrates and future ligand design tailored to the mechanistic demands of Ni-catalyzed SMCs.

Nickel-palladium bimetallic nanoparticles supported on multi-walled carbon nanotubes; versatile catalyst for Sonogashira cross-coupling reactions

We have developed an efficient method to generate highly active nickel-palladium bimetallic nanoparticles supported on multi-walled carbon nanotubes (Ni-Pd/MWCNTs) by dry mixing of the nickel and palladium salts utilizing the mechanical energy of a ball-mill. These nanoparticles were successfully employed in Sonogashira cross-coupling reactions with a wide array of functionalized aryl halides and terminal alkynes under ligand and copper free conditions using a Monowave 50 heating reactor. Notably, the concentration of palladium can be lowered to a minimum amount of 0.81% and replaced by more abundant and less expensive nickel nanoparticles while effectively catalyzing the reaction. The remarkable reactivity of the Ni-Pd/MWCNTs catalyst toward Sonogashira cross-coupling reactions is attributed to the high degree of the dispersion of Ni-Pd nanoparticles with small particle size of 5-10 nm due to an efficient grinding method. The catalyst was easily removed from the reaction mixture by centrifugation and reused several times with minimal loss of catalytic activity. Furthermore, the concentration of catalyst in Sonogashira reactions can be reduced to a minimum amount of 0.01 mol% while still providing a high conversion of the Sonogashira product with a remarkable turnover number (TON) of 7200 and turnover frequency (TOF) of 21 600 h^-1. The catalyst was fully characterized by a variety of spectroscopic techniques including X-ray diffraction (XRD), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS).

Important Role of NH-Carbazole in Aryl Amination Reactions Catalyzed by 2-Aminobiphenyl Palladacycles

2-Aminobiphenyl palladacycles are among the most successful precatalysts for Pd-catalyzed cross-coupling reactions, including aryl amination. However, the role of NH-carbazole, a byproduct of precatalyst activation, remains poorly understood. Herein, the mechanism of the aryl amination reactions catalyzed by a cationic 2-aminobiphenyl palladacycle supported by a terphenyl phosphine ligand, PCyp₂Ar^Xyl2 (Cyp = cyclopentyl; Ar^Xyl2 = 2,6-bis(2,6-dimethylphenyl)phenyl), P1, has been thoroughly investigated. Combining computational and experimental studies, we found that the Pd(II) oxidative addition intermediate reacts with NH-carbazole in the presence of the base (NaO ^t Bu) to yield a stable aryl carbazolyl Pd(II) complex. This species functions as the catalyst resting state, providing the amount of monoligated LPd(0) species required for catalysis and minimizing Pd decomposition. In the case of a reaction with aniline, an equilibrium between the carbazolyl complex and the on-cycle anilido analogue is established, which allows for a fast reaction at room temperature. In contrast, heating is required in a reaction with alkylamines, whose deprotonation involves coordination to the Pd center. A microkinetic model was built combining computational and experimental data to validate the mechanistic proposals. In conclusion, our study shows that despite the rate reduction observed in some reactions by the formation of the aryl carbazolyl Pd(II) complex, this species reduces catalyst decomposition and could be considered an alternative precatalyst in cross-coupling reactions.

Elucidating electron-transfer events in polypyridine nickel complexes for reductive coupling reactions

Polypyridine-ligated nickel complexes are widely used as privileged catalysts in a variety of cross-coupling reactions. The rapid adoption of these complexes is tentatively attributed to their ability to shuttle between different oxidation states and engage in electron-transfer reactions. However, these reactions are poorly understood in mechanistic terms. Here we investigate the reactivity of pseudohalide- and halide-ligated Ni(II) complexes, containing polypyridine ligands, in electron-transfer reactions. Specifically, Ni(II) halide complexes trigger comproportionation with Ni(0) with exceptional ease en route to Ni(I)L n species, whereas the corresponding Ni(II) pseudohalide congeners are resistant to electron transfer, with Ni(I) pseudohalides being prone to disproportionation events. These observations are corroborated by electrochemical techniques and detailed quantum mechanical calculations. We also show that catalytically inactive Ni(II) pseudohalide complexes can be reactivated in the presence of exogeneous salts. From a broader perspective, this study provides rationalizations for overlooked and fundamental steps within the Ni-catalysed cross-coupling arena, thus offering blueprints for designing future Ni-catalysed reactions.

Structurally Diverse Bench-Stable Nickel(0) Pre-Catalysts: A Practical Toolkit for In Situ Ligation Protocols

A flurry of recent research has centered on harnessing the power of nickel catalysis in organic synthesis. These efforts have been bolstered by contemporaneous development of well-defined nickel (pre)catalysts with diverse structure and reactivity. In this report, we present ten different bench-stable, 18-electron, formally zero-valent nickel-olefin complexes that are competent pre-catalysts in various reactions. Our investigation includes preparations of novel, bench-stable Ni(COD)(L) complexes (COD=1,5-cyclooctadiene), in which L=quinone, cyclopentadienone, thiophene-S-oxide, and fulvene. Characterization by NMR, IR, single-crystal X-ray diffraction, cyclic voltammetry, thermogravimetric analysis, and natural bond orbital analysis sheds light on the structure, bonding, and properties of these complexes. Applications in an assortment of nickel-catalyzed reactions underscore the complementary nature of the different pre-catalysts within this toolkit.

Sustainable and practical formation of carbon-carbon and carbon-heteroatom bonds employing organo-alkali metal reagents

Metal-catalysed cross-coupling reactions are amongst the most widely used methods to directly construct new bonds. In this connection, sustainable and practical protocols, especially transition metal-catalysed cross-coupling reactions, have become the focus in many aspects of synthetic chemistry due to their high efficiency and atom economy. This review summarises recent advances from 2012 to 2022 in the formation of carbon-carbon bonds and carbon-heteroatom bonds by employing organo-alkali metal reagents.

Revised Mechanism of C(sp3)-C(sp3) Reductive Elimination from Ni(II) with the Assistance of a Z-Type Metalloligand

Reductive elimination is a key step in Ni-catalyzed cross-couplings. Compared with processes that proceed from Ni(III) or Ni(IV) intermediates, C(sp³)-C(sp³) reductive eliminations from Ni(II) centers are challenging due to the weak oxidizing ability of Ni(II) species. In this report, we present computational evidence that supports a mechanism in which Zn coordination to the nickel center as a Z-type ligand accelerates reductive elimination. This Zn-assisted pathway is found to be lower in energy compared with direct reductive elimination from a σ-coordinated Ni(II) intermediate, providing new insights into the mechanism of Ni-catalyzed cross-coupling with organozinc nucleophiles. Mayer bond order, Hirshfield charge, Laplacian of the electron density, orbital, and interaction region indicator analyses were conducted to elucidate details of the reductive elimination process and characterize the key intermediates. Theoretical calculations indicate a significant Z-type Ni-Zn interaction that reduces the electron density around the Ni center and accelerates reductive elimination. This mechanistic study of reductive elimination in Ni(0)-catalyzed conjunctive cross-couplings of aryl iodides, organozinc reagents, and alkenes is an important case study of the involvement of Zn-assisted reductive elimination in Ni catalysis. We anticipate that the novel Zn-assisted reductive elimination mode may extend to other cross-coupling processes and explain the unique effectiveness of organozinc nucleophiles in many instances.

Preformed Pd(II) Catalysts Based on Monoanionic [N,O] Ligands for Suzuki-Miyaura Cross-Coupling at Low Temperature

This paper describes the synthesis and catalytic testing of a palladium complex with a 5-membered chelating [N,O] ligand, derived from the condensation of 2,6-diisopropylphenyl aniline and maple lactone. This catalyst was active towards the Suzuki-Miyaura cross-coupling reaction, and its activity was optimised through the selection of base, solvent, catalytic loading and temperature. The optimised conditions are mild, occurring at room temperature and over a short timescale (1 h) using solvents considered to be ‘green’. A substrate scope was then carried out in which the catalyst showed good activity towards aryl bromides with electron-withdrawing groups. The catalyst was active across a broad scope of electron-donating and high-withdrawing aryl bromides with the highest activity shown for weak electron-withdrawing groups. The catalyst also showed good activity across a range of boronic acids and pinacol esters with even boronic acids featuring strong electron-withdrawing groups showing some activity. The catalyst was also a capable catalyst for the cross-coupling of aryl chlorides and phenylboronic acid. This more challenging reaction requires slightly elevated temperatures over a longer timescale but is still considered mild compared to similar examples in the literature.

Theoretical Insight on the High Reactivity of Reductive Elimination of NiIII Based on Energy- and Electron-Transfer Mechanisms

Iridium/nickel (Ir/Ni) metallaphotoredox dual catalysis overcomes the challenging reductive elimination (RE) of Ni(II) species and has made a breakthrough progress to construct a wide range of C-X (X = C, N, S, and P) bonds. However, the corresponding reaction mechanisms are still ambiguous and controversial because the systematic research on the nature of this synergistic catalysis is not sufficient. Herein, Ir^III/Ni^II and Ir^III/Ni⁰ metallaphotoredox catalysis have been theoretically explored taking the aryl esterification reaction of benzoic acid and aryl bromide as an example by a combination of density functional theory (DFT), molecular dynamics, and time-dependent DFT computations. It is found that an electron-transfer mechanism is applicable to Ir^III/Ni^II metallaphotoredox catalysis, but an energy-transfer mechanism is applicable to Ir^III/Ni⁰ combination. The Ir^III/Ni^II metallaphotoredox catalysis succeeds to construct a Ni^I-Ni^III catalytic cycle to avoid the challenging RE of Ni(II) species, while the RE occurs from triplet excited-state Ni(II) species in the Ir^III/Ni⁰ metallaphotoredox catalysis. In addition, the lower lowest unoccupied molecular orbital energy level of Ni(III) species than that of Ni(II) species accelerates RE from Ni(III) one. The triplet excited-state Ni(II) species can resemble a Ni(III) center, considering the metal-to-ligand charge transfer character to promote the RE.

Pd-Loaded Cellulose NanoSponge as a Heterogeneous Catalyst for Suzuki-Miyaura Coupling Reactions

The (eco)design and synthesis of durable heterogeneous catalysts starting from renewable sources derived from biomass waste represents an important step for reducing environmental impacts of organic transformations. Herein, we report the efficient loading of Pd(II) ions on an eco-safe cellulose-based organic support (CNS), obtained by thermal cross-linking between TEMPO-oxidized cellulose nanofibers and branched polyethyleneimine in the presence of citric acid. A 22.7% w/w Pd-loading on CNS was determined by the ICP-OES technique, while the metal distribution on the xerogel was evidenced by SEM-EDS analysis. XPS analysis confirmed the direct chelation of Pd(II) ions by means of the high number of amino groups present in the network, so that further functionalization of the support with specific ligands was not necessary. The new composite turned to be an efficient heterogeneous pre-catalyst for promoting Suzuki-Miyaura coupling reactions between aryl halides and phenyl boronic acid in water, obtaining yields higher than 90% in 30 min, by operating in a microwave reactor at 100 °C and with just 2% w/w of CNS-Pd catalyst with respect to aryl halides (4.5‱ for Pd). At the end of first reaction cycle, Pd(II) ions on the support resulted in being reduced to Pd(0) while maintaining the same catalytic efficiency. In fact, no leaching was observed at the end of reactions, and five cycles of recycling and reusing of CNS-Pd catalyst provided excellent results in terms of yields and selectivity in the desired products.

A Phosphine-ß-diketiminate Nickel(I)-Complex for Small Molecule Activation

A bis(diphenyl)-phosphine functionalized ß-diketimine ligand (PNac-H) was applied for the synthesis of a subvalent Ni(I) complex [PNac-Ni]. Here, the Ni(I) center is stabilized by a tetradentate PNNP-type pocket, forming a square planar coordination sphere. Subsequently, the Ni(I) complex was investigated with regard to its reactivity and the activation of small molecules. The reductive potential of Ni(I) enabled an activation of different substrate classes, such as CH2X2 (X=Br, I), I2 or Ph2E2 (E=S, Se). The ligand's design allows a stabilization of the reactive Ni(I) species while at the same time enabling activation processes due to a hemilabile coordination behavior and accessible axial coordination sites. The activation products have been characterized by single crystal X-ray diffraction, NMR and IR spectroscopy as well as elemental analysis.

Formation of exceptional monomeric YPhos-PdCl2 complexes with high activities in coupling reactions

The use of well-defined palladium(ii) complexes as precatalysts for C-X cross-coupling reactions has improved the use of palladium catalysts in organic synthesis including large-scale processes. Whereas sophisticated Pd(ii) precursors have been developed in the past years to facilitate catalyst activation as well as the handling of systems with more advanced monophosphine ligands, we herein report that simple PdCl₂ complexes function as efficient precatalysts for ylide-substituted phosphines (YPhos). These complexes are readily synthesized from PdCl₂ sources and form unprecedented monomeric PdCl₂ complexes without the need for any additional coligand. Instead, these structures are stabilized through a unique bonding motif, in which the YPhos ligands bind to the metal through the adjacent phosphine and ylidic carbon site. DFT calculations showed that these bonds are both dative interactions with the stronger interaction originating from the electron-rich phosphine donor. This bonding mode leads to a remarkable stability even towards air and moisture. Nonetheless, the complexes readily form monoligated LPd(0) complexes and thus the active palladium(0) species in coupling reactions. Accordingly, the YPhos-PdCl₂ complexes serve as highly efficient precatalysts for a series of C-C and C-X coupling reactions. Despite their simplicity they can compete with the efficiency of more complex and less stable precatalysts.