Stabilization of photoactive phases for perovskite photovoltaics

Stabilization of Organic Cations in Lead Halide Perovskite Solar Cells Using Phosphine Oxides Derivatives

Preventing ion migration in perovskite photovoltaics is key to achieving stable and efficient devices. The activation energy for ion migration is affected by the chemical environment surrounding the ions. Thus, the migration of organic cations in lead halide perovskites can be mitigated by engineering their local interactions, for example through hydrogen bonding. Ion migration also leads to ionic losses via interfacial reactions. Undesirable reactivities of the organic cations can be eliminated by introducing protecting groups. In this work, we report bis(2-oxo-3-oxazolidinyl) phosphinic chloride (BOP-Cl) as a perovskite ink additive with the following benefits: (1) The phosphoryl and two oxo groups form six-membered intermolecular hydrogen-bonded rings with the formamidinium cation (FA), mitigating ion migrations. (2) The hydrogen bonding reduces the electrophilicity of the ammonium protons by donating electron density, therefore reducing its reactivity with the surface oxygen on the metal oxide. Furthermore, the molecule can react to form a protecting group on the nucleophilic oxygen at the tin oxide transport layer surface through the elimination of chlorine. As a result, we achieve perovskite solar cells with an efficiency of 25.0% and improved MPP stability T93 = 1200 h at 40-45 °C compared to a control device (T86 = 550 h). In addition, we show a negative correlation between the strength of hydrogen bonding of different phosphine oxide derivatives to the organic cations and the degree of metastable behavior (e.g., initial burn-in) of the device.

Lead-Chelating Intermediate for Air-Processed Phase-Pure FAPbI3 Perovskite Solar Cells

Formamidinium-lead triiodide (FAPbI3) perovskite holds promise as a prime candidate in the realm of perovskite photovoltaics. However, the photo-active α-FAPbI3 phase, existing as a metastable state, is observable solely at elevated temperatures and is susceptible to degradation into the δ-phase in ambient air. Therefore, the attainment of phase-stable α-FAPbI3 in ambient conditions has become a crucial objective in perovskite research. Here, we proposed an efficient conversion process of PbI2 into the α-FAPbI3 perovskites in ambient air. This conversion was facilitated by the introduction of chelating molecules, which interacted with PbI2 to form an intermediate phase. Due to the reduced formation barrier resulting from the altered reaction pathway, this stable intermediate phase transitioned directly into α-FAPbI3 upon the deposition of the organic cation solution, effectively bypassing the formation of δ-FAPbI3. Consequently, the ambient-fabricated FAPbI3 perovskite solar cells (PSCs) exhibited an outstanding power conversion efficiency of 25.08 %, along with a high open-circuit voltage of 1.19 V. Furthermore, the unencapsulated devices demonstrated remarkable environmental stability. Notably, this innovative approach promises broad applicability across various chelating molecules, opening new avenues for further progress in the ambient air fabrication of FAPbI3 PSCs.

Atomic Imaging of Multi-Dimensional Ruddlesden-Popper Interfaces in Lead-Halide Perovskites

Ruddlesden-Popper (RP) interface with defined stacking structure will fundamentally influence the optoelectronic performances of lead-halide perovskite (LHP) materials and devices. However, it remains challenging to observe the atomic local structures in LHPs, especially for multi-dimensional RP interface hidden inside the nanocrystal. In this work, the advantages of two imaging modes in scanning transmission electron microscopy (STEM), including high-angle annular dark field (HAADF) and integrated differential phase contrast (iDPC) STEM, are successfully combined to study the bulk and local structures of inorganic and organic/inorganic hybrid LHP nanocrystals. Then, the multi-dimensional RP interfaces in these LHPs are atomically resolved with clear gap and blurred transition region, respectively. In particular, the complex interface by the RP stacking in 3D directions can be analyzed in 2D projected image. Finally, the phase transition, ion missing, and electronic structures related to this interface are investigated. These results provide real-space evidence for observing and analyzing atomic multi-dimensional RP interfaces, which may help to better understand the structure-property relation of LHPs, especially their complex local structures.

High-entropy alloy screening for halide perovskites

As the concept of high-entropy alloying (HEA) extends beyond metals, new materials screening methods are needed. Halide perovskites (HP) are a prime case study because greater stability is needed for photovoltaics applications, and there are 322 experimentally observed HP end-members, which leads to more than 1057 potential alloys. We screen HEAHP by first calculating the configurational entropy of 106 equimolar alloys with experimentally observed end-members. To estimate enthalpy at low computational cost, we turn to the delta-lattice parameter approach, a well-known method for predicting III-V alloy miscibility. To generalize the approach for non-cubic crystals, we introduce the parameter of unit cell volume coefficient of variation (UCV), which does a good job of predicting the experimental HP miscibility data. We use plots of entropy stabilization versus UCV to screen promising alloys and identify 102 HEAHP of interest.

Towards the 10-Year Milestone of Monolithic Perovskite/Silicon Tandem Solar Cells

The perovskite/silicon tandem solar cell represents one of the most promising avenues for exceeding the Shockley-Queisser limit for single-junction solar cells at a reasonable cost. Remarkably, its efficiency has rapidly increased from 13.7% in 2015 to 34.6% in 2024. Despite the significant research efforts dedicated to this topic, the "secret" to achieving high-performance perovskite/silicon tandem solar cells seems to be confined to a few research groups. Additionally, the discrepancies in preparation and characterization between single-junction and tandem solar cells continue to impede the transition from efficient single-junction to efficient tandem solar cells. This review first revisits the key milestones in the development of monolithic perovskite/silicon tandem solar cells over the past decade. Then, a comprehensive analysis of the background, advancements, and challenges in perovskite/silicon tandem solar cells is provided, following the sequence of the tandem fabrication process. The progress and limitations of the prevalent stability measurements for tandem devices are also discussed. Finally, a roadmap for designing efficient, scalable, and stable perovskite/silicon tandem solar cells is outlined. This review takes the growth history into consideration while charting the future course of perovskite/silicon tandem research.

A crystal capping layer for formation of black-phase FAPbI3 perovskite in humid air

Black-phase formamidinium lead iodide (α-FAPbI3) perovskites are the desired phase for photovoltaic applications, but water can trigger formation of photoinactive impurity phases such as δ-FAPbI3. We show that the classic solvent system for perovskite fabrication exacerbates this reproducibility challenge. The conventional coordinative solvent dimethyl sulfoxide (DMSO) promoted δ-FAPbI3 formation under high relative humidity (RH) conditions because of its hygroscopic nature. We introduced chlorine-containing organic molecules to form a capping layer that blocked moisture penetration while preserving DMSO-based complexes to regulate crystal growth. We report power conversion efficiencies of >24.5% for perovskite solar cells fabricated across an RH range of 20 to 60%, and 23.4% at 80% RH. The unencapsulated device retained 96% of its initial performance in air (with 40 to 60% RH) after 500-hour maximum power point operation.

Anions Regulation of 1D Perovskite Intrusion-Behavior for Efficient and Stable Perovskite Solar Cells

Constructing a 1D/3D perovskite heterojunction has recently emerged as a prevalent approach for elevating the efficiency and stability of perovskite solar cells (PSCs), due to the excellent defect-passivation capacity and enhanced resistance to water and oxygen of 1D perovskite. However, the 1D perovskite commonly exhibits much poorer charge carrier transport ability when compared with its 3D counterpart. Tailoring the intrusion depth of a 1D perovskite into the 1D/3D heterojunction is thus of key importance for PSCs but remains a great challenge. We introduce herein a novel anion-regulation strategy that can effectively tune the intrusion behavior of 1D perovskite into 3D perovskite to form a 1D/3D heterojunction with gradual structure and gradient energy-level alignment. This gradual 1D/3D-perovskite interface leads to outstanding defect passivation performance, together with a desired balance between charge transport and moisture/oxygen blocking. Consequently, the PSCs with a 1D/3D perovskite heterojunction resulting from tetra-n-butylammonium acetate (TBAAc) treatment yield a remarkable enhancement in power conversion efficiency (PCE) from 18.4 to 20.1%. The unencapsulated device also demonstrates excellent stability and retains 90% of its initial PCE after 2400 h of storage in the air atmosphere with 30 ± 5% humidity at 25 ± 5 °C.

Anisotropy of Anion Diffusion in All-Inorganic Perovskite Single Crystals

Ion diffusion is a fundamentally important process in understanding and manipulating the optoelectronic properties of semiconductors. Most current studies on ionic diffusion have been focusing on perovskite polycrystalline thin films and nanocrystals. However, the random orientation and grain boundaries can heavily interfere with the kinetics of ion diffusion, where the experimental results only reveal the average ion exchange kinetics and the actual ion diffusion mechanisms perpendicular to the direction of individual crystal facets remain unclear. Here, the anion (Cl, I) diffusion anisotropy on (111) and (100) facets of CsPbBr3 single crystals is demonstrated. The as-grown single crystals with (111) and (100) facets exhibit anisotropic growth with different halide incorporation, which lead to different resulting optoelectronic properties. Combined experimental characterizations and theoretical calculations reveal that the (111) CsPbBr3 shows a faster anion diffusion behavior compared with that of the (100) CsPbBr3, with a lower diffusion energy barrier, a larger built-in electric field, and lower inverse defect formation energy. The work highlights the anion diffusion anisotropic mechanisms perpendicular to the direction of individual crystal facets for optimizing and designing perovskite optoelectronic devices.

Unprecedented Richness of Temperature- and Pressure-Induced Polymorphism in 1D Lead Iodide Perovskite

Inherent features of metal halide perovskites are their softness, complex lattice dynamics, and phase transitions spectacularly tuning their structures and properties. While the structural transformations are well described and classified in 3D perovskites, their 1D analogs are much less understood. Herein, both temperature- and pressure-dependent structural evolutions of a 1D AcaPbI3 perovskitoid incorporating acetamidinium (Aca) cation are examined. The study reveals the existence of nine phases of δ-AcaPbI3, which present the most diverse polymorphic collection among known perovskite materials. Interestingly, temperature- and pressure-triggered phase transitions in the 1D perovskotoid exhibit fundamentally different natures: the thermal transformations are mainly associated with the collective translations of rigid polyanionic units and ordering/disordering dynamics of Aca cations, while the compression primarily affects inorganic polymer chains. Moreover, in the 1-D chains featuring the face-sharing connection mode of the PbI6 octahedra the Pb···Pb distances are significantly shortened compared to the corner-sharing 3D perovskite frameworks, hence operating in the van der Waals territory. Strikingly, a good correlation is found between the Pb···Pb distances and the pressure evolution of the bandgap values in the δ-AcaPbI3, indicating that in 1D perovskitoid structures, the contacts between Pb2+ ions are one of the critical parameters determining their properties.

Interfacial host-guest complexation for inverted perovskite solar cells

Perovskite solar cells have demonstrated exceptional development over the past decade, but their stability remains a challenge toward the application of this technology. Several strategies have been used to address this, and the use of host-guest complexation has recently attracted more interest. However, this approach has primarily been exploited in conventional perovskite solar cells based on n-i-p architectures, while its use in inverted p-i-n devices remains unexplored. Herein, we employ representative crown ether, dibenzo-24-crown-8, for interfacial host-guest complexation in inverted perovskite solar cells based on methylammonium and methylammonium-free formamidinium-cesium halide perovskite compositions. Upon post-treatment of the perovskite films, we observed nanostructures on the surface that were associated with the reduced amount of trap states at the interface with the electron transport layer. As a result, we demonstrate improved efficiencies and operational stabilities following ISOS-D-2I and ISOS-L-2I protocols, demonstrating the viability of this approach to advance device stability.

Two-Dimensional Materials for Highly Efficient and Stable Perovskite Solar Cells

Perovskite solar cells (PSCs) offer low costs and high power conversion efficiency. However, the lack of long-term stability, primarily stemming from the interfacial defects and the susceptible metal electrodes, hinders their practical application. In the past few years, two-dimensional (2D) materials (e.g., graphene and its derivatives, transitional metal dichalcogenides, MXenes, and black phosphorus) have been identified as a promising solution to solving these problems because of their dangling bond-free surfaces, layer-dependent electronic band structures, tunable functional groups, and inherent compactness. Here, recent progress of 2D material toward efficient and stable PSCs is summarized, including its role as both interface materials and electrodes. We discuss their beneficial effects on perovskite growth, energy level alignment, defect passivation, as well as blocking external stimulus. In particular, the unique properties of 2D materials to form van der Waals heterojunction at the bottom interface are emphasized. Finally, perspectives on the further development of PSCs using 2D materials are provided, such as designing high-quality van der Waals heterojunction, enhancing the uniformity and coverage of 2D nanosheets, and developing new 2D materials-based electrodes.

Synergetic Electrostatic and Steric Effects in α-FAPbI3 Single Crystals For X-Ray Detection and Imaging

It is still challenging to stabilize α-FAPbI3 perovskite for high performance optoelectrical devices. Herein, a novel strategy is proposed utilizing the synergetic electrostatic and steric effect to stabilize the α-FAPbI3 phase and suppress the ion migration. Dimethylamine (DMA+) cations are chosen as the dopant to fabricate FA0.96DMA0.04PbI3 single crystals (SCs). DFT calculations reveal that DMA+ cations can improve the stability of α-FAPbI3 phase in both thermodynamics (lower Gibbs free energy) and kinetics (higher defect formation and migration energy). The resulting SCs exhibit an environmental stability over 100 days and an extraordinary low dark current drift of 3.7 × 10-7 nA cm-1 s-1 V-1, comparable to 2D perovskite SCs. The X-ray detectors have also achieved the-state-of-the-art performance in X-ray detection and imaging. This work demonstrates the significance of electrostatic and steric effects in improving the phase and operational stability of perovskites.

Multifunctional Trifluoroborate Additive for Simultaneous Carrier Dynamics Governance and Defects Passivation to Boost Efficiency and Stability of Inverted Perovskite Solar Cells

The main obstacles to promoting the commercialization of perovskite solar cells (PSCs) include their record power conversion efficiency (PCE), which still remains below the Shockley-Queisser limit, and poor long-term stability, attributable to crystallographic defects in perovskite films and open-circuit voltage (Voc) loss in devices. In this study, potassium (4-tert-butoxycarbonylpiperazin-1-yl) methyl trifluoroborate (PTFBK) was employed as a multifunctional additive to target and modulate bulk perovskite defects and carrier dynamics of PSCs. Apart from simultaneously passivating anionic and cationic defects, PTFBK could also optimize the energy-level alignment of devices and weaken the interaction between carriers and longitudinal optical phonons, resulting in a carrier lifetime of greater than 3 μs. Furthermore, it inhibited non-radiative recombination and improved the crystallization capacity in the target perovskite film. Hence, the target rigid and flexible p-i-n PSCs yielded champion PCEs of 24.99 % and 23.48 %, respectively. More importantly, due to hydrogen bonding between formamidinium and fluorine, the target devices exhibited remarkable thermal, humidity, and operational tracking at maximum power point stabilities. The reduced Young's modulus and residual stress in the perovskite layer also provided excellent bending stability for flexible target devices.

Toward the Commercialization of Perovskite Solar Modules

Perovskite (PVSK) photovoltaic (PV) devices are undergoing rapid development and have reached a certified power conversion efficiency (PCE) of 26.1% at the cell level. Tremendous efforts in material and device engineering have also increased moisture, heat, and light-related stability. Moreover, the solution-process nature makes the fabrication process of perovskite photovoltaic devices feasible and compatible with some mature high-volume manufacturing techniques. All these features render perovskite solar modules (PSMs) suitable for terawatt-scale energy production with a low levelized cost of electricity (LCOE). In this review, the current status of perovskite solar cells (PSCs) and modules and their potential applications are first introduced. Then critical challenges are identified in their commercialization and propose the corresponding solutions, including developing strategies to realize high-quality films over a large area to further improve power conversion efficiency and stability to meet the commercial demands. Finally, some potential development directions and issues requiring attention in the future, mainly focusing on further dealing with toxicity and recycling of the whole device, and the attainment of highly efficient perovskite-based tandem modules, which can reduce the environmental impact and accelerate the LCOE reduction are put forwarded.

Phase Control and Singlet Energy Transfer Enabled by Trimethylamine Modified Boron Dipyrromethene for Stable CsPbBr3 Quantum Wells

The phase distribution and organic spacer cations play pivotal roles in determining the emission performance and stability of perovskite quantum wells (QWs). Here, we propose a universal molecular regulation strategy to tailor phase distribution and enhance the stability of CsPbBr3 QWs. The capability of sterically hindered ligands with formidable surface binding groups is underscored in directing CsPbBr3 growth and refining phase distribution. With trimethylamine modified boron dipyrromethene (BDP-TMA) ligand as a representative, the BDP-TMA driven can precisely control phase distribution and passivate defects of CsPbBr3 . Notably, BDP-TMA acts as a co-spacer organic entity in obtained BDP-TMA-CsPbBr3 , facilitating efficient singlet energy transfer and tailoring the luminescence to produce a distinctive bluish-white emission. The BDP-TMA-CsPbBr3 demonstrates significant phase stability under water exposure, light irradiation, and moderate temperature. Interestingly, BDP-TMA-CsPbBr3 exhibits the thermally-induced dynamic fluorescence control at elevated temperatures, which can be achieved feasible for advanced information encryption. This discovery paves the way for the exploration of perovskite QWs in applications like temperature sensing, anti-counterfeiting, and other advanced optical smart technologies.

Beyond Planar Structure: Curved π-Conjugated Molecules for High-Performing and Stable Perovskite Solar Cells

Perovskite solar cell (PSC) shows a great potential to become the next-generation photovoltaic technology, which has stimulated researchers to engineer materials and to innovate device architectures for promoting device performance and stability. As the power conversion efficiency (PCE) keeps advancing, the importance of exploring multifunctional materials for the PSCs has been increasingly recognized. Considerable attention has been directed to the design and synthesis of novel organic π-conjugated molecules, particularly the emerging curved ones, which can perform various unmatched functions for PSCs. In this review, the characteristics of three representative such curved π-conjugated molecules (fullerene, corannulene and helicene) and the recent progress concerning the application of these molecules in state-of-the-art PSCs are summarized and discussed holistically. With this discussion, we hope to provide a fresh perspective on the structure-property relation of these unique materials toward high-performance and high-stability PSCs.

Single-Crystal-Assisted In Situ Phase Reconstruction Enables Efficient and Stable 2D/3D Perovskite Solar Cells

Perovskite solar cells (PSCs) that incorporate both two-dimensional (2D) and three-dimensional (3D) phases possess the potential to combine the high stability of 2D PSCs with the superior efficiency of 3D PSCs. Here, we demonstrated in situ phase reconstruction of 2D/3D perovskites using a 2D perovskite single-crystal-assisted method. A gradient phase distribution of 2D RP perovskites was formed after spin-coating a solution of the 2D Ruddlesden-Popper (RP) perovskite single crystal, (DFP)2PbI4, onto the 3D perovskite surface, followed by thermal annealing. The resulting film exhibits much reduced trap density, increased carrier mobility, and superior water resistance. As a result, the optimized 2D/3D PSCs achieved a champion efficiency of 24.87% with a high open-circuit voltage (VOC) of 1.185 V. This performance surpasses the control 3D perovskite device, which achieved an efficiency of 22.43% and a VOC of 1.129 V. Importantly, the unencapsulated device demonstrates significantly enhanced operational stability, preserving over 97% of its original efficiency after continuous light irradiation for 1500 h. Moreover, the extrapolated T80 lifetimes surpass 5700 h. These findings pave the way for rational regulation of the gradient phase distribution at the interface between 2D and 3D perovskites by employing 2D RP perovskite crystals to achieve stable and efficient PSCs.

Growth methods' effect on the physical characteristics of CsPbBr3 single crystal

This study offers an extensive exploration into approaches for cultivating CsPbBr3 SCs using inverse temperature crystallization (ITC), with a specific focus on seed-induced (method (1)) and nucleation-mediated (method (2)) growth techniques. Our findings reveal that leveraging seed-assisted growth at lower temperatures yields noteworthy enhancements in the material's optical and electrical behaviors, outperforming the outcomes achieved through nucleation-driven growth. Concretely, through the employment of the space charge limited current (SCLC) technique, an evident contrast emerges in the trap-populated threshold voltage between the seed-facilitated crystal (SC1) (measuring 0.309 V) and its nucleation-facilitated counterpart (SC2) (measuring 1.513 V), consequently giving rise to discernable dissimilarities in trap density assessments. Evidence from temperature-dependent analysis of space charge limited currents substantiates these findings, revealing trap density values of 8.81 × 109 cm-3 for SC1, juxtaposed with 2.08 × 1010 cm-3 for SC2. Additionally, the SC1 displays a notably diminished trap energy level. Furthermore, the investigation underscores the affirmative influence of method (1) at lower temperatures on the optical and crystalline characteristics of the substance. This effect is evidenced by enhanced photoluminescence (PL) reactions and reduced lattice strain (Ls), as determined through X-ray diffraction (XRD) techniques. Moreover, the research establishes the substantial impact of this enhanced crystallization technique on the photodetector (PD) attributes of the crystal. This effect induces elevated levels of detectivity and responsivity for method (1).

Post-Treatment-Free Dual-Interface Passivation via Facile 1D/3D Perovskite Heterojunction Construction

For achieving high-efficiency perovskite solar cells, it is almost always necessary to substantially passivate defects and protect the perovskite structure at its interfaces with charge transport layers. Such a modification generally involves the post-treatment of the deposited perovskite film by spin coating, which cannot meet the technical demands of scaling up the production of perovskite photovoltaics. In this work, we demonstrate one-step construction of buried and capped double 1D/3D heterojunctions without the need for any post-treatment, which is achieved through facile tetraethylammonium trifluoroacetate (TEATFA) prefunctionalization on the SnO2 substrate. The functional TEATFA salt is first deposited onto the SnO2 substrate and reacts on this buried interface. Once the FAPbI3 perovskite precursor solution is dripped, a portion of the TEA+ cations spontaneously diffuse to the top surface over film crystallization. The TEATFA-based water-resistant 1D/3D TEAPbI3/FAPbI3 heterojunctions at both the buried and capped interfaces lead to much better photovoltaic performance and higher operational stability. Since this approach saves the need for any postsynthesis passivation, its feasibility for the fabrication of large-area perovskite photovoltaics is also showcased. Compared to ∼15% for a pristine 5 cm × 5 cm FAPbI3 mini-module without postsynthesis passivation, over 20% efficiency is achieved following the proposed route, demonstrating its great potential for larger-scale fabrication with fewer processing steps.

Phase-Pure α-FAPbI3 Perovskite Solar Cells via Activating Lead-Iodine Frameworks

Narrow bandgap cubic formamidine perovskite (α-FAPbI3 ) is widely studied for its potential to achieve record-breaking efficiency. However, its high preparation difficulty caused by lattice instability is criticized. A popular strategy for stabilizing the α-FAPbI3 lattice is to replace intrinsic FA+ or I- with smaller ions of MA+ , Cs+ , Rb+ , and Br- , whereas this generally leads to broadened optical bandgap and phase separation. Studies show that ions substitution-free phase-pure α-FAPbI3 can achieve intrinsic phase stability. However, the challenging preparation of high-quality films has hindered its further development. Here, a facile synthesis of high-quality MA+ , Cs+ , Rb+ , and Br- -free phase-pure α-FAPbI3 perovskite film by a new solution modification strategy is reported. This enables the activation of lead-iodine (Pb─I) frameworks by forming the coated Pb⋯O network, thus simultaneously promoting spontaneous homogeneous nucleation and rapid phase transition from δ to α phase. As a result, the efficient and stable phase-pure α-FAPbI3 PSC is obtained through a one-step method without antisolvent treatment, with a record efficiency of 23.15% and excellent long-term operating stability for 500 h under continuous light stress.

Can Lead-Free Double Halide Perovskites Serve as Proper Photovoltaic Absorber?

The emerging Pb-free double perovskites (DPs) are acknowledged as the most potential nontoxic alternatives to lead halide perovskites for thin-film photovoltaics, yet their photophysical properties significantly lag behind expectations. To tackle this issue, it is imperative to conduct a systematic investigation of the structure and optoelectronic properties and to sift through vast chemical space to extract new types of Pb-free DPs with exceptional optoelectronic characteristics and thermal stability. Through high-throughput first-principal calculations, we demonstrate that apart from a select few Pb-free DPs (e.g., Cs2InSbCl6 and Cs2TlBiBr6), other categories, even with suitable direct electronic bandgaps, exhibit inferior optical absorption due to the inversion symmetry-induced parity-forbidden transitions. The mismatch between the electronic and optical bandgap, thence, casts doubt on the reliability of the electronic bandgap as a criterion for Pb-free DPs in various optoelectronics. The assessed limited thermostability under operational conditions, however, hinders any Pb-free DPs from effectively serving as photovoltaic absorbers. Alongside the compositional engineering discussed above, the prospect of manipulating local-site symmetry and disrupting the parity forbidden transitions in stabilized Pb-free DPs through materials engineering should be recognized as a pivotal and rational avenue toward achieving high performance.

Grain Boundary Elimination via Recrystallization-Assisted Vapor Deposition for Efficient and Stable Perovskite Solar Cells and Modules

Vapor deposition is a promising technology for the mass production of perovskite solar cells. However, the efficiencies of solar cells and modules based on vapor-deposited perovskites are significantly lower than those fabricated using the solution method. Emerging evidence suggests that large defects are generated during vapor deposition owing to a specific top-down crystallization mechanism. Herein, a hybrid vapor deposition method combined with solvent-assisted recrystallization for fabricating high-quality large-area perovskite films with low defect densities is presented. It is demonstrated that an intermediate phase can be formed at the grain boundaries, which induces the secondary growth of small grains into large ones. Consequently, perovskite films with substantially reduced grain boundaries and defect densities are fabricated. Results of temperature-dependent charge-carrier dynamics show that the proposed method successfully suppresses all recombination reactions. Champion efficiencies of 21.9% for small-area (0.16 cm2 ) cells and 19.9% for large-area (10.0 cm2 ) solar modules under AM 1.5 G irradiation are achieved. Moreover, the modules exhibit high operational stability, i.e., they retain >92% of their initial efficiencies after 200 h of continuous operation.

Managing Excess Lead Iodide with Ordered Distribution and Reduced Photoactivity via Chelating Ligands for Stable Inverted Perovskite Solar Cells

Excess lead iodide (PbI2) aggregates distributed in perovskite photoreactive absorbers will perturb carrier collection and become a key source of instability in PSCs. Herein, a multisite heterocyclic ligand of 2-mercaptonicotinic acid (2-MNA) is introduced as a chelating agent to manage excess PbI2 in inverted PSCs. The chelating coordination of 2-MNA to Pb2+ ions through the carbonyl, sulfhydryl, and pyridinyl groups enables a high-quality perovskite film with reduced PbI2 aggregates and the formation of an ordered distribution at grain boundaries. Moreover, the coordination of 2-MNA with the [PbX6]4- octahedron effectively inhibits the photodecomposition of PbI2-rich perovskites, thus preventing the generation of metallic lead (Pb0) and iodine (I2) species in response to environmental stimuli. As a result, the inverted PSC based on a 2-MNA modified triple cation perovskite photoactive layer achieves a PCE of 21.27% and a fill factor of 82.07%, accompanied by improved thermal and photostability.