Self-assembly and characterization of 2D plasmene nanosheets

Photonic Nanomaterials for Wearable Health Solutions

This review underscores the transformative potential of photonic nanomaterials in wearable health technologies, driven by increasing demands for personalized health monitoring. Their unique optical and physical properties enable rapid, precise, and sensitive real-time monitoring, outperforming conventional electrical-based sensors. Integrated into ultra-thin, flexible, and stretchable formats, these materials enhance compatibility with the human body, enabling prolonged wear, improved efficiency, and reduced power consumption. A comprehensive exploration is provided of the integration of photonic nanomaterials into wearable devices, addressing material selection, light-matter interaction principles, and device assembly strategies. The review highlights critical elements such as device form factors, sensing modalities, and power and data communication, with representative examples in skin patches and contact lenses. These devices enable precise monitoring and management of biomarkers of diseases or biological responses. Furthermore, advancements in materials and integration approaches have paved the way for continuum of care systems combining multifunctional sensors with therapeutic drug delivery mechanisms. To overcome existing barriers, this review outlines strategies of material design, device engineering, system integration, and machine learning to inspire innovation and accelerate the adoption of photonic nanomaterials for next-generation of wearable health, showcasing their versatility and transformative potential for digital health applications.

A Rootless Duckweed-Inspired Flexible Artificial Leaf from Plasmonic Photocatalysts

The naturally existing leaves are ubiquitous two-dimensional flexible solar-to-chemical conversion systems that can run continuously in a sustainable manner. However, the current artificial photocatalytic systems are unable to achieve this due to the grand challenge in integrating existing photocatalysts in a flexible layout with high conversion efficiency and the ability to function independently. Here, we report on a rootless duckweed-inspired artificial leaf based on a lightweight, flexible, Janus plasmonic nanosheet-integrated sponge. The Janus plasmonic catalytically active nanosheet was made from self-assembled gold nanocube nanoassemblies grown on the porous sponges, which were further coated with an ultrathin palladium layer on one side via a ligand symmetry-breaking method. This sponge-based photocatalytic system is lightweight yet able to float on a water surface and conducts the gas-liquid reaction without auxiliary pumping and mixing devices. In a model reaction of 4-nitrophenol reduction, this floating leaf could achieve 2.5-fold and 65-fold higher efficiency than the corresponding dispersion and precipitation systems, respectively. The film theory is used to explain the sponge-based lightweight solar-to-chemical conversion system in a detailed kinetic and thermodynamic analysis, including the reaction rate constant, activation energy, enthalpy, entropy, Gibbs energy, and equilibrium constant.

Surfactant-Free Method to Prevent Gold Nanoparticle Aggregation and Its Surface-Enhanced Raman Scattering Applications

The introduction of surfactants to stabilize colloidal citrate-reduced gold nanoparticles (prevent aggregation) is usually used in surface-enhanced Raman scattering (SERS) applications. However, the surfactants have many drawbacks for SERS applications, such as increasing the SERS background and blocking surface active sites. Here, we develop a surfactant-free method to stabilize colloidal cit-AuNPs based on alkali regulation, and this method can prevent gold nanoparticle aggregation under different harsh treatments, including ligand modification, centrifugation-based washing/enrichment, and salt addition. The SERS spectra, density functional theory simulation, and ζ potentials of cit-AuNPs indicate that the stability of enhanced cit-AuNPs under alkaline conditions is attributed to both the increased negative charge density (by ∼6 times from pH 7 to 12) and the molecular configuration on the metal surface. Compared with surfactant-based methods, this method can well maintain the inherent optical and interface properties of nanoparticles, avoid the SERS background, and avoid blocking of the surface active site due to the presence of surfactants. This method will enable AuNPs to have a wide range of applications in areas such as highly sensitive SERS sensors.

Materials-Driven Soft Wearable Bioelectronics for Connected Healthcare

In the era of Internet-of-things, many things can stay connected; however, biological systems, including those necessary for human health, remain unable to stay connected to the global Internet due to the lack of soft conformal biosensors. The fundamental challenge lies in the fact that electronics and biology are distinct and incompatible, as they are based on different materials via different functioning principles. In particular, the human body is soft and curvilinear, yet electronics are typically rigid and planar. Recent advances in materials and materials design have generated tremendous opportunities to design soft wearable bioelectronics, which may bridge the gap, enabling the ultimate dream of connected healthcare for anyone, anytime, and anywhere. We begin with a review of the historical development of healthcare, indicating the significant trend of connected healthcare. This is followed by the focal point of discussion about new materials and materials design, particularly low-dimensional nanomaterials. We summarize material types and their attributes for designing soft bioelectronic sensors; we also cover their synthesis and fabrication methods, including top-down, bottom-up, and their combined approaches. Next, we discuss the wearable energy challenges and progress made to date. In addition to front-end wearable devices, we also describe back-end machine learning algorithms, artificial intelligence, telecommunication, and software. Afterward, we describe the integration of soft wearable bioelectronic systems which have been applied in various testbeds in real-world settings, including laboratories that are preclinical and clinical environments. Finally, we narrate the remaining challenges and opportunities in conjunction with our perspectives.

Combining surface-accessible Ag and Au colloidal nanomaterials with SERS for in situ analysis of molecule-metal interactions in complex solution environments

The interactions between molecules and noble metal nanosurfaces play a central role in many areas of nanotechnology. The surface chemistry of noble metal surfaces under ideal, clean conditions has been extensively studied; however, clean conditions are seldom met in real-world applications. We developed a sensitive and robust characterization technique for probing the surface chemistry of nanomaterials in the complex environments that are directly relevant to their applications. Surface-enhanced Raman spectroscopy (SERS) can be used to probe the interaction of plasmonic nanoparticles with light to enhance the Raman signals of molecules near the surface of nanoparticles. Here, we explain how to couple SERS with surface-accessible plasmonic-enhancing substrates, which are capped with weakly adsorbing capping ligands such as citrate and chloride ions, to allow molecule-metal interactions to be probed in situ and in real time, thus providing information on the surface orientation and the formation and breaking of chemical bonds. The procedure covers the synthesis and characterization of surface-accessible colloids, the preliminary SERS screening with agglomerated colloids, the synthesis and characterization of interfacial nanoparticle assemblies, termed metal liquid-like films, and the in situ biphasic SERS analysis with metal liquid-like films. The applications of the approach are illustrated using two examples: the probing of π-metal interactions and that of target/ligand-particle interactions on hollow bimetallic nanostars. This protocol, from the initial synthesis of the surface-accessible plasmonic nanoparticles to the final in situ biphasic SERS analysis, requires ~14 h and is ideally suited to users with basic knowledge in performing Raman spectroscopy and wet synthesis of metal nanoparticles.

Hierarchically Doped Plasmonic Nanocrystal Metamaterials

Assembling plasmonic nanocrystals in regular superlattices can produce effective optical properties not found in homogeneous materials. However, the range of these metamaterial properties is limited when a single nanocrystal composition is selected for the constituent meta-atoms. Here, we show how continuously varying doping at two length scales, the atomic and nanocrystal scales, enables tuning of both the frequency and bandwidth of the collective plasmon resonance in nanocrystal-based metasurfaces, while these features are inextricably linked in single-component superlattices. Varying the mixing ratio of indium tin oxide nanocrystals with different dopant concentrations, we use large-scale simulations to predict the emergence of a broad infrared spectral region with near-zero permittivity. Experimentally, tunable reflectance and absorption bands are observed, owing to in- and out-of-plane collective resonances. These spectral features and the predicted strong near-field enhancement establish this multiscale doping strategy as a powerful new approach to designing metamaterials for optical applications.

Metal-Halide Perovskite Nanocrystal Superlattice: Self-Assembly and Optical Fingerprints

Self-assembly of nanocrystals into superlattices is a fascinating process that not only changes geometric morphology, but also creates unique properties that considerably enrich the material toolbox for new applications. Numerous studies have driven the blossoming of superlattices from various aspects. These include precise control of size and morphology, enhancement of properties, exploitation of functions, and integration of the material into miniature devices. The effective synthesis of metal-halide perovskite nanocrystals has advanced research on self-assembly of building blocks into micrometer-sized superlattices. More importantly, these materials exhibit abundant optical features, including highly coherent superfluorescence, amplified spontaneous laser emission, and adjustable spectral redshift, facilitating basic research and state-of-the-art applications. This review summarizes recent advances in the field of metal-halide perovskite superlattices. It begins with basic packing models and introduces various stacking configurations of superlattices. The potential of multiple capping ligands is also discussed and their crucial role in superlattice growth is highlighted, followed by detailed reviews of synthesis and characterization methods. How these optical features can be distinguished and present contemporary applications is then considered. This review concludes with a list of unanswered questions and an outlook on their potential use in quantum computing and quantum communications to stimulate further research in this area.

Nanoparticle Assembly and Oriented Attachment: Correlating Controlling Factors to the Resulting Structures

Nanoparticle assembly and attachment are common pathways of crystal growth by which particles organize into larger scale materials with hierarchical structure and long-range order. In particular, oriented attachment (OA), which is a special type of particle assembly, has attracted great attention in recent years because of the wide range of material structures that result from this process, such as one-dimensional (1D) nanowires, two-dimensional (2D) sheets, three-dimensional (3D) branched structures, twinned crystals, defects, etc. Utilizing in situ transmission electron microscopy techniques, researchers observed orientation-specific forces that act over short distances (∼1 nm) from the particle surfaces and drive the OA process. Integrating recently developed 3D fast force mapping via atomic force microscopy with theories and simulations, researchers have resolved the near-surface solution structure, the molecular details of charge states at particle/fluid interfaces, inhomogeneity of surface charges, and dielectric/magnetic properties of particles that influence short- and long-range forces, such as electrostatic, van der Waals, hydration, and dipole-dipole forces. In this review, we discuss the fundamental principles for understanding particle assembly and attachment processes, and the controlling factors and resulting structures. We review recent progress in the field via examples of both experiments and modeling, and discuss current developments and the future outlook.

In Situ Self-Assembly of Nanoscale Particles into Macroscale Ordered Monolayers with Enhanced Memory Performance

In situ fabrication of macroscale ordered monolayers of nanoparticles (NPs) on targeted substrates is highly desirable for precision electronic and optical devices, while it remains a great challenge. In this study, a solution is provided to address this challenge by developing a colloidal ink formulation and employing the direct-ink-writing (DIW) technique, where on-demand delivery of ink at a targeted location and directional evaporation with controllable rate are leveraged to precisely guide the deposition of polystyrene-grafted gold NPs (Au@PS NPs) into a macroscale monolayer with an ordered Au NP array embedded in a PS thin film. A 2D steady-state diffusion-controlled evaporation model, which explains the parameter dependence of the experimental results and gives semiquantitative agreement with the experimental evaporation kinetics is proposed. The ordered monolayer is used as both nanocrystal floating gates and the tunneling layer for nonvolatile memory devices. It shows significantly enhanced performance compared with a disordered NP film prepared by spin coating. This approach allows for fine control of NP self-assembly to print macroscaleordered monolayers directly onto substrates, which has great promise for application in broad fields, including microelectronic and photoelectronic devices, sensors, and functional coatings.

Engineering 2D Aligned Nanowires Assembled Porous Hetero-Membrane for Smart Ion Transport

Engineering 2D nanosheets with well-defined porous structures and their assembled heterostructure membrane is a promising method to improve osmotic energy conversion. However, it is still a great challenge to directly fabricate 2D nanosheets with regular parallel nanochannels in aqueous media. Here, the desired functional nanosheets and heterostructure membrane device are successfully prepared through a simple interfacial assembly strategy. In this method, monolayer cylindrical monomicelles closely arrange and assemble on the surfaces of graphene oxide, and the resulting nanosheets with monolayered aligned nanowire polymer arrays parallel to the substrate surfaces are then obtained. Subsequently, a heterostructured membrane is constructed by assembling these 2D nanosheets on macroporous alumina. The nanofluidic membrane device with asymmetric geometry and charge polarity exhibits smart ion transport properties, and the output osmotic power density is ≈1.22 and 1.63 times over the reported pure 2D graphene oxide and biomass-derived membranes, respectively. In addition, theoretical calculations are carried out to reveal the mechanisms for ion selectivity and salinity gradient energy conversion. This monolayered interfacial assembly approach can open up new avenues for the synthesis of functional porous low-dimensional nanomaterials and membrane devices, and expand the palette of materials selection for many applications.

Plasmonic/magnetic nanoarchitectures: From controllable design to biosensing and bioelectronic interfaces

Controllable design of the nanocrystal-assembled plasmonic/magnetic nanoarchitectures (P/MNAs) inspires abundant methodologies to enhance light-matter interactions and control magnetic-induced effects by means of fine-tuning the morphology and ordered packing of noble metallic or magnetic building blocks. The burgeoning development of multifunctional nanoarchitectures has opened up broad range of interdisciplinary applications including biosensing, in vitro diagnostic devices, point-of-care (POC) platforms, and soft bioelectronics. By taking advantage of their customizability and efficient conjugation with capping biomolecules, various nanoarchitectures have been integrated into high-performance biosensors with remarkable sensitivity and versatility, enabling key features that combined multiplexed detection, ease-of-use and miniaturization. In this review, we provide an overview of the representative developments of nanoarchitectures that being built by plasmonic and magnetic nanoparticles over recent decades. The design principles and key mechanisms for signal amplification and quantitative sensitivity have been explored. We highlight the structure-function programmability and prospects of addressing the main limitations for conventional biosensing strategies in terms of accurate selectivity, sensitivity, throughput, and optoelectronic integration. State-of-the-art strategies to achieve affordable and field-deployable POC devices for early multiplexed detection of infectious diseases such as COVID-19 has been covered in this review. Finally, we discuss the urgent yet challenging issues in nanoarchitectures design and related biosensing application, such as large-scale fabrication and integration with portable devices, and provide perspectives and suggestions on developing smart biosensors that connecting the materials science and biomedical engineering for personal health monitoring.

Combining printing and nanoparticle assembly: Methodology and application of nanoparticle patterning

Functional nanoparticles (NPs) with unique photoelectric, mechanical, magnetic, and chemical properties have attracted considerable attention. Aggregated NPs rather than individual NPs are generally required for sensing, electronics, and catalysis. However, the transformation of functional NP aggregates into scalable, controllable, and affordable functional devices remains challenging. Printing is a promising additive manufacturing technology for fabricating devices from NP building blocks because of its capabilities for rapid prototyping and versatile multifunctional manufacturing. This paper reviews recent advances in NP patterning based on the combination of self-assembly and printing technologies (including two-, three-, and four-dimensional printing), introduces the basic characteristics of these methods, and discusses various fields of NP patterning applications.

•

Nanoparticles (NPs) printing assembly is a good solution for patterned devices

•

NPs assembly can be combined with 2D, 3D, and 4D printing technologies

•

A variety of ink-dispersed NPs are available for printing assembly

•

NPs printing assembly technology is applied for nanosensing, energy storage, photodetector

Folding of two-dimensional nanoparticle superlattices enabled by emulsion-confined supramolecular co-assembly

Folding of two-dimensional nanoparticle superlattices is achieved through templated assembly on as-formed supramolecular nanosheets, which undergo a folding process within the emulsion droplets during the evaporation of the inner phase liquid. Building the folded nanoparticle superlattices opens a new gateway to reshape the properties of inorganic solids.

Plasmonic Superlattice Membranes Based on Bimetallic Nano-Sea Urchins as High-Performance Label-Free Surface-Enhanced Raman Spectroscopy Platforms

On the basis of an abundance of elemental plasmonic nanocrystals identifiable by their unique morphology and intrinsic optoelectronic properties, it is necessary to rationally tailor the structural parameters to optimize the functionalities of nanoassemblies for application as plasmonic circuits/devices. Among them, the plasmonic superlattice membrane has emerged as a novel optically active metamaterial, which is constructed by nanocrystals at a two-dimensional (2D) plane with a highly ordered structure and strong plasmonic coupling interactions. Here, we report on the fabrication of a novel plasmonic superlattice membrane using bimetallic core-shell nano-sea urchins (Nano-SEUs) as meta-atoms. Under the guidance of soft-ligand balancing in conjugation with drying-mediated self-assembly at the air/water interface, well-defined giant 2D superlattices with total lateral dimensions of up to 5 mm wide and 80 nm thick have been synthesized, corresponding to an aspect ratio of 62 500. Programmable morphology control over the Nano-SEUs has been achieved in high yield by rationally tuning the spiky branches as well as the thickness of the silver shell, allowing systematic variation of the plasmonic properties of the membrane. Such superlattice membranes exhibited a strong and reproducible surface-enhanced Raman spectroscopy (SERS) signal that originates from interparticle coupling and electric (E)-field enhancement, enabling an enhancement factor of up to 10⁶. We also demonstrated that the fabricated membrane allows the label-free SERS detection of dopamine from 0.1 nM to 1 μM. Thus, this giant Nano-SEU assembled superlattice membrane can be used as a SERS substrate for on-spot biomarker detection, which paves a robust and inexpensive avenue for highly sensitive and reliable biomedical sensing and diagnostics.

Binary Plasmonic Assembly Films with Hotspot-Type-Dependent Surface-Enhanced Raman Scattering Properties

Tuning and controlling the plasmon coupling of noble metal nanoparticles are significant for enhancing their near-field and far-field responses. In this work, a novel heterogeneous plasmonic assembly with a controllable hot spot model was proposed by the conjugation of Au nanospheres (NSs) and Au@Ag core-shell nanocube (NC) films. Three hotspot configurations including point-to-point type, point-to-facet type, and facet-to-facet type were fabricated and transformed simply by adjusting the doping ratio of nanoparticles in the co-assembly film. Expectedly, the localized surface plasmon resonance (LSPR) property and surface-enhanced Raman scattering (SERS) performance of the binary assembly film exhibit distinct diversity due to the change in the hotspot conformation. Interestingly, the point-to-facet hotspot in hybrid assembly films can provide the most extraordinary enhancement for SERS behavior compared with single-component Au NS and Au@Ag NC plasmonic assemblies, which is further confirmed by the finite-different time-domain simulation results of dimer nanostructures. In addition, the two-dimensional binary assemblies of Au NS doping in Au@Ag NCs with excellent sensitivity and high reproducibility were successfully applied in the identification of ketamine. This work opens a new avenue toward the fabrication of plasmonic metal materials with collective LSPR properties and sensitive SERS behavior.

Transfer Printing of Freestanding Nanoassemblies: A Route to Membrane Resonators with Adjustable Prestress

Freestanding nanoassemblies represent a new class of functional materials with highly responsive optical, electrical, and mechanical properties. Hence, they are well-suited for applications in advanced sensor devices. Here, it is shown that transfer printing enables the well-controlled fabrication of freestanding membranes from layered nanoassemblies: Using a polydimethylsiloxane (PDMS) stamp, thin films (thickness: ∼45 to ∼51 nm) of 1,6-hexanedithiol cross-linked gold nanoparticles (diameter: ∼3.9 ± 0.8 nm) were transferred onto surface-oxidized silicon substrates featuring square microcavities with edge lengths of ∼78 μm. After adjusting the contact pressure to 1.8 bar, intact membranes were printed in yields of ∼70%. The prestress of printed membranes was determined by measuring their resonance frequencies under electrostatic actuation. In general, the prestress values were in the ∼10 MPa range with standard deviations below 10% for parallel printed resonators. The deviations in average prestress between resonators printed onto different substrates were 21% or less. By increasing the temperature during the final transfer step from 5 to 48 °C, it was possible to tune the average prestress from ∼14 to ∼28 MPa. This effect was attributed to the pronounced thermal expansion of the PDMS stamp. Finally, by transfer printing layered films of graphene oxide/silk fibroin (GO/SF), it is shown that the approach can be adapted for the fabrication of freestanding membranes from very different nanomaterials.

Seagrass-inspired design of soft photocatalytic sheets based on hydrogel-integrated free-standing 2D nanoassemblies of multifunctional nanohexagons

Natural leaves are virtually two-dimensional (2D) flexible photocatalytic system. In particular, seagrass can efficiently harvest low-intensity sunlight to drive photochemical reactions continuously in an aqueous solution. To mimic this process, we present a novel 2D hydrogel-integrated photocatalytic sheet based on free-standing nanoassemblies of multifunctional nanohexagons (mNHs). The mNHs building blocks is made of plasmonic gold nanohexagons (NHs) decorated with Pd nanoparticles in the corners and CdS nanoparticles throughout their exposed surfaces. The mNHs can self-assemble into free-standing 2D nanoassemblies and be integrated with thin hydrogel films, which can catalyze chemical reactions under visible light illumination. Hydrogels are translucent, porous, and soft, allowing for continuous photochemical conversion in an aqueous environment. Using methylene blue (MB) as a model system, we demonstrate a soft seagrass-like photodegradation design, which offers high efficiency, continuous operation without the need of catalyst regeneration, and omnidirectional light-harvesting capability under low-intensity sunlight irradiation, defying their rigid substrate-supported random aggregates and solution-based discrete counterparts.

Morphologically Diverse Micro- and Macrostructures Created via Solvent Evaporation-Induced Assembly of Fluorescent Spherical Particles in the Presence of Polyethylene Glycol Derivatives

The creation of fluorescent micro- and macrostructures with the desired morphologies and sizes is of considerable importance due to their intrinsic functions and performance. However, it is still challenging to modulate the morphology of fluorescent organic materials and to obtain insight into the factors governing the morphological evolution. We present a facile bottom-up approach to constructing diverse micro- and macrostructures by connecting fluorescent spherical particles (SPs), which are generated via the spherical assembly of photoisomerizable azobenzene-based propeller-shaped chromophores, only with the help of commercially available polyethylene glycol (PEG) derivatives. Without any extra additives, solvent evaporation created a slow morphological evolution of the SPs from short linear chains (with a length of a few micrometers) to larger, interconnected networks and sheet structures (ranging from tens to >100 µm) at the air–liquid interface. Their morphologies and sizes were significantly dependent on the fraction and length of the PEG. Our experimental results suggest that noncovalent interactions (such as hydrophobic forces and hydrogen bonding) between the amphiphilic PEG chains and the relatively hydrophobic SPs were weak in aqueous solutions, but play a crucial role in creating the morphologically diverse micro- and macrostructures. Moreover, short-term irradiation with visible light caused fast morphological crumpling and fluorescence switching of the obtained structures.

Tuning Hierarchical Order and Plasmonic Coupling of Large-Area, Polymer-Grafted Gold Nanorod Assemblies via Flow-Coating

Solution-based printing of anisotropic nanostructures is foundational to many emerging technologies, such as energy storage devices, photonic elements, and sensors. Methods to rapidly (>mm/s) manufacture large area assemblies (≫cm²) with simultaneous control of thickness (<10 nm), nanoparticle spacing (<5 nm), surface roughness (<5 nm), and global and local orientational order are still lacking. Herein, we demonstrate such capability using flow-coating to fabricate robust, self-supporting mono- and bilayer films of polystyrene-grafted gold nanorods (PS-AuNRs) onto solid substrates. The relationship among solvent evaporation, deposition speed, substrate surface energy, concentration, and film thickness for solutions of such hairy hybrid nanoparticles spans the Landau-Levich and evaporative film formation regimes. In the Landau-Levich regime, solvent evaporation rapidly concentrates the PS-AuNRs, leading to the formation of thin films with distinct, randomized side-by-side domains. Alternatively, processing at slower velocities in the evaporative regime results in the global alignment of PS-AuNRs. Processing speed and substrate surface energy afford tuning of the film's optical extinction of a given PS-AuNR via fine control of inter-rod distance and subsequent plasmonic coupling between neighboring nanorods. Because the concept of the polymer-grafted nanorod can be expanded to a variety of different polymer canopies, shapes, and core materials, the processing-structure relationships established in this work will have important implications on the future development of anisotropic nanostructure-based applications.

Orientation-Dependent Soft Plasmonics of Gold Nanobipyramid Plasmene Nanosheets

In parallel to the burgeoning field of soft electronics, soft plasmonics focuses on the design and fabrication of plasmonic structures supported on elastomers and to understand how their properties respond to mechanical deformations. Here, we report on a partial ligand-stripping strategy to fabricate elastomer-supported gold nanobipyramid (NBP) plasmene nanosheets. Unlike spherelike building blocks, NBP-building blocks display complex orientation-dependent plasmonic responses to external strains. By collecting polarized plasmonic resonance spectra in conjunction with electrostatic eigenmode modeling, we reveal simultaneous changes in interparticle spacing and spatial orientations of NBP building blocks under mechanical strains. Such changes are directly related to initial NBP packing orders. Further analysis of strain sensitivities for various NBP plasmenes indicated that plasmonic spectra of ∼45° oriented samples are mostly susceptible to strain at acute polarized angles. The results presented may enable novel applications in future soft optoelectronic devices in sensing, encryption, and data storage.

Self-assembled Janus plasmene nanosheets as flexible 2D photocatalysts

A leaf is a free-standing photocatalytic system that can effectively harvest solar energy and convert CO₂ and H₂O into carbohydrates in a continuous manner without the need for regeneration or tedious product extraction steps. Despite encouraging advances achieved in designing artificial photocatalysts, most of them function in bulk solution or on rigid surfaces. Here, we report on a 2D flexible photocatalytic system based on close packed Janus plasmene nanosheets. One side of the Janus nanosheets is hydrophilic with catalytically active palladium, while the opposite side is hydrophobic with plasmonic nanocrystals. Such a unique design ensures a stable nanostructure on a flexible polymer substrate, preventing dissolution/degradation of plasmonic photocatalysts during chemical conversion in aqueous solutions. Using catalytic reduction of 4-nitrophenol as a model reaction, we demonstrated efficient plasmon-enhanced photochemical conversion on our flexible Janus plasmene. The photocatalytic efficiency could be tuned by adjusting the palladium thickness or types of constituent building blocks or their orientations, indicating the potential for tailor-made catalyst design for desired reactions. Furthermore, the flexible Janus plasmene nanosheets were designed into a small 3D printed artificial tree, which could continuously convert 30 mL of chemicals in 45 minutes.

Wearable plasmonic-metasurface sensor for noninvasive and universal molecular fingerprint detection on biointerfaces

Wearable sensing technology is an essential link to future personalized medicine. However, to obtain a complete picture of human health, it is necessary but challenging to track multiple analytes inside the body simultaneously. Here, we present a wearable plasmonic-electronic sensor with "universal" molecular recognition ability. Flexible plasmonic metasurface with surface-enhanced Raman scattering (SERS)-activity is introduced as the fundamental sensing component in a wearable sensor since we solved the technical challenge of maintaining the plasmonic activities of their brittle nanostructures under various deformations. Together with a flexible electronic sweat extraction system, our sensor can noninvasively extract and "fingerprint" analytes inside the body based on their unique SERS spectra. As a proof-of-concept example, we successfully monitored the variation of trace-amounts drugs inside the body and obtained an individual's drug metabolic profile. Our sensor bridges the existing gap in wearable sensing technology by providing a universal, sensitive molecular tracking means to assess human health.

Plasmene nanosheets as optical skin strain sensors

Skin-like optoelectronic sensors can have a wide range of technical applications ranging from wearable/implantable biodiagnostics, human-machine interfaces, and soft robotics to artificial intelligence. The previous focus has been on electrical signal transduction, whether resistive, capacitive, or piezoelectric. Here, we report on "optical skin" strain sensors based on elastomer-supported, highly ordered, and closely packed plasmonic nanocrystal arrays (plasmene). Using gold nanocubes (AuNCs) as a model system, we find that the types of polymeric ligands, interparticle spacing, and AuNC sizes play vital roles in strain-induced plasmonic responses. In particular, brush-forming polystyrene (PS) is a "good" ligand for forming elastic plasmenes which display strain-induced blue shift of high-energy plasmonic peaks with high reversibility upon strain release. Further experimental and simulation studies reveal the transition from isotropic uniform plasmon coupling at a non-strained state to anisotropic plasmon coupling at strained states, due to the AuNC alignment perpendicular to the straining direction. The two-term plasmonic ruler model may predict the primary high-energy peak location. Using the relative shift of the averaged high-energy peak to the coupling peak before straining, a plasmene nanosheet may be used as a strain sensor with the sensitivity depending on its internal structures, such as the constituent AuNC size or inter-particle spacing.

Structural order in plasmonic superlattices

The assembly of plasmonic nanoparticles into ordered 2D- and 3D-superlattices could pave the way towards new tailored materials for plasmonic sensing, photocatalysis and manipulation of light on the nanoscale. The properties of such materials strongly depend on their geometry, and accordingly straightforward protocols to obtain precise plasmonic superlattices are highly desirable. Here, we synthesize large areas of crystalline mono-, bi- and multilayers of gold nanoparticles >20 nm with a small number of defects. The superlattices can be described as hexagonal crystals with standard deviations of the lattice parameter below 1%. The periodic arrangement within the superlattices leads to new well-defined collective plasmon-polariton modes. The general level of achieved superlattice quality will be of benefit for a broad range of applications, ranging from fundamental studies of light-matter interaction to optical metamaterials and substrates for surface-enhanced spectroscopies.

Self-assembly of anisotropic nanoparticles into functional superstructures

Self-assembly of colloidal nanoparticles (NPs) into superstructures offers a flexible and promising pathway to manipulate the nanometer-sized particles and thus make full use of their unique properties. This bottom-up strategy builds a bridge between the NP regime and a new class of transformative materials across multiple length scales for technological applications. In this field, anisotropic NPs with size- and shape-dependent physical properties as self-assembly building blocks have long fascinated scientists. Self-assembly of anisotropic NPs not only opens up exciting opportunities to engineer a variety of intriguing and complex superlattice architectures, but also provides access to discover emergent collective properties that stem from their ordered arrangement. Thus, this has stimulated enormous research interests in both fundamental science and technological applications. This present review comprehensively summarizes the latest advances in this area, and highlights their rich packing behaviors from the viewpoint of NP shape. We provide the basics of the experimental techniques to produce NP superstructures and structural characterization tools, and detail the delicate assembled structures. Then the current understanding of the assembly dynamics is discussed with the assistance of in situ studies, followed by emergent collective properties from these NP assemblies. Finally, we end this article with the remaining challenges and outlook, hoping to encourage further research in this field.

Marangoni Effect-Driven Transfer and Compression at Three-Phase Interfaces for Highly Reproducible Nanoparticle Monolayers

Interfacial self-assembly is a powerful technology for preparing large scale nanoparticle monolayers, but fabrication of highly repeatable large scale nanoparticle monolayers remains a challenge. Here we develop an oil/water/oil (O/W/O) three-phase system based on the Marangoni effect to fabricate highly reproducible nanoparticle monolayers. Nanoparticles could be easily transferred and compressed from the lower O/W interface to the upper O/W interface due to the interfacial tension gradient. The O/W/O system can be constructed using different kinds of organic solvents. Through this approach, good uniformity and reproducibility of the nanoparticle monolayers could be guaranteed even using a wide range of nanoparticle concentrations. Furthermore, this strategy is generally applicable to various nanoparticles with different sizes, shapes, components, and surface ligands, which offers a facile and general approach to functional nanodevices.