Hyperspectral Imaging for Predicting the Internal Quality of Kiwifruits Based on Variable Selection Algorithms and Chemometric Models

Internal quality prediction technology for 'Sulhyang' strawberry fruit using organic analysis and hyperspectral imaging

In recent years, hyperspectral imaging combined with machine learning techniques has garnered significant attention for its potential in assessing fruit maturity. This study proposes a method for predicting strawberry fruit maturity based on the harvest time. The main features of this study are as follows. 1) Selection of wavelength band associated with strawberry growth season; 2) Extraction of efficient parameters to predict strawberry maturity 3) Prediction of internal quality attributes of strawberries using extracted parameters. In this study, experts cultivated strawberries in a controlled environment and performed hyperspectral measurements and organic analyses on the fruit with minimal time delay to facilitate accurate modeling. Data augmentation techniques through cross-validation and interpolation were effective in improving model performance. The four parameters included in the model and the cumulative value of the model were available for quality prediction as additional parameters. Among these five parameter candidates, two parameters with linearity were finally identified. The predictive outcomes for firmness, soluble solids content, acidity, and anthocyanin levels in strawberry fruit, based on the two identified parameters, are as follows: The first parameter, ps, demonstrated RMSE performances of 1.0 N, 2.3 %, 0.1 %, and 2.0 mg per 100 g fresh fruit for firmness, soluble solids content, acidity, and anthocyanin, respectively. The second parameter, p3, showed RMSE performances of 0.6 N, 1.2 %, 0.1 %, and 1.8 mg per 100 g fresh fruit, respectively. The proposed non-destructive analysis method shows the potential to overcome the challenges associated with destructive testing methods for assessing certain internal qualities of strawberry fruit.

Quantitative measurement of internal quality of carrots using hyperspectral imaging and multivariate analysis

The study aimed to measure the carotenoid (Car) and pH contents of carrots using hyperspectral imaging. A total of 300 images were collected using a hyperspectral imaging system, covering 472 wavebands from 400 to 1000 nm. Regions of interest (ROIs) were defined to extract average spectra from the hyperspectral images (HIS). We developed two models: least squares support vector machine (LS-SVM) and partial least squares regression (PLSR) to establish a quantitative analysis between the pigment amounts and spectra. The spectra and pigment contents were predicted and correlated using these models. The selection of EWs for modeling was done using the Successive Projections Algorithm (SPA), regression coefficients (RC) from PLSR models, and LS-SVM. The results demonstrated that hyperspectral imaging could effectively evaluate the internal attributes of carrot cortex and xylem. Moreover, these models accurately predicted the Car and pH contents of the carrot parts. This study provides a valuable approach for variable selection and modeling in hyperspectral imaging studies of carrots.

Multiscale Static Compressive Damage Characteristics of Kiwifruit Based on the Finite Element Method

In the handling or processing process, fruits are easily crushed by external loads. This type of damage in fruit often leads to the internal pulp browning and rotting, with the severity largely dependent on the fruit tissue's geometric and mechanical properties. In kiwifruits, with their thin skin and dark-colored flesh, it is particularly challenging to observe and analyze the damage caused by extrusion through traditional experimental methods. The objective of this research is to construct a multi-scale finite element model encompassing the skin, flesh, and core by measuring the geometric and mechanical properties of kiwifruit, to assess and predict the damage characteristics under compression, and to verify the accuracy of the finite element model through experiments. The results indicated that kiwifruits demonstrated different compressive strengths in different directions during compression. The compressive strength in the axial direction was higher than that in the radial direction, and there was little difference between the long and short radial directions. The flesh tissue is the most vulnerable to mechanical damage under external compression, followed by the core. At strain levels below 5%, there was no noticeable damage in the axial or radial directions of the kiwifruit. However, when strain exceeded 5%, damage began to manifest in some of the flesh tissue. To maintain fruit quality during storage and transportation, the stacking height should not exceed 77 fruits in the axial direction, 48 in the long direction, and 53 in the short direction. The finite element analysis showed that the established model can effectively simulate and predict the internal damage behavior of kiwifruits under compression loads, which is helpful for a deeper understanding of the mechanical properties of fruits and provides a theoretical basis and technical guidance for minimizing mechanical damage during fruit handling.

Combining Vis-NIR and NIR Spectral Imaging Techniques with Data Fusion for Rapid and Nondestructive Multi-Quality Detection of Cherry Tomatoes

Firmness, soluble solid content (SSC) and titratable acidity (TA) are characteristic substances for evaluating the quality of cherry tomatoes. In this paper, a hyper spectral imaging (HSI) system using visible/near-infrared (Vis-NIR) and near-infrared (NIR) was proposed to detect the key qualities of cherry tomatoes. The effects of individual spectral information and fused spectral information in the detection of different qualities were compared for firmness, SSC and TA of cherry tomatoes. Data layer fusion combined with multiple machine learning methods including principal component regression (PCR), partial least squares regression (PLSR), support vector regression (SVR) and back propagation neural network (BP) is used for model training. The results show that for firmness, SSC and TA, the determination coefficient R2 of the multi-quality prediction model established by Vis-NIR spectra is higher than that of NIR spectra. The R2 of the best model obtained by SSC and TA fusion band is greater than 0.9, and that of the best model obtained by the firmness fusion band is greater than 0.85. It is better to use the spectral bands after information fusion for nondestructive quality detection of cherry tomatoes. This study shows that hyperspectral imaging technology can be used for the nondestructive detection of multiple qualities of cherry tomatoes, and the method based on the fusion of two spectra has a better prediction effect for the rapid detection of multiple qualities of cherry tomatoes compared with a single spectrum. This study can provide certain technical support for the rapid nondestructive detection of multiple qualities in other melons and fruits.

Towards a Multispectral Imaging System for Spatial Mapping of Chemical Composition in Fresh-Cut Pineapple (Ananas comosus)

With increasing public demand for ready-to-eat fresh-cut fruit, the postharvest industry requires the development and adaptation of monitoring technologies to provide customers with a product of consistent quality. The fresh-cut trade of pineapples (Ananas comosus) is on the rise, favored by the sensory quality of the product and mechanization of the cutting process. In this paper, a multispectral imaging-based approach is introduced to provide distribution maps of moisture content, soluble solids content, and carotenoids content in fresh-cut pineapple. A dataset containing hyperspectral images (380-1690 nm) and reference measurements in 10 regions of interest of 60 fruit (n = 600) was prepared. Ranking and uncorrelatedness (based on ReliefF algorithm) and subset selection (based on CfsSubset algorithm) approaches were applied to find the most informative wavelengths in which bandpass optical filters or light sources are commercially available. The correlation coefficient and error metrics obtained by cross-validated multilayer perceptron neural network models indicated that the superior selected wavelengths (495, 500, 505, 1215, 1240, and 1425 nm) resulted in prediction of moisture content with R = 0.56, MAPE = 1.92%, soluble solids content with R = 0.52, MAPE = 14.72%, and carotenoids content with R = 0.63, MAPE = 43.99%. Prediction of chemical composition in each pixel of the multispectral images using the calibration models yielded spatially distributed quantification of the fruit slice, spatially varying according to the maturation of single fruitlets in the whole pineapple. Calibration models provided reliable responses spatially throughout the surface of fresh-cut pineapple slices with a constant error. According to the approach to use commercially relevant wavelengths, calibration models could be applied in classifying fruit segments in the mechanized preparation of fresh-cut produce.

Improving the prediction performance of soluble solids content (SSC) in kiwifruit by means of near-infrared spectroscopy using slope/bias correction and calibration updating

Soluble solids content (SSC) is particularly important for kiwifruit, as it not only determines its flavor, but also helps assess its maturity. Visible/near-infrared (Vis/NIR) spectroscopy has been widely used to evaluate the SSC of kiwifruit. Still, the local calibration models may be ineffective for new batches of samples with biological variability, which limits the commercial application of this technology. Thus, a calibration model was developed using one batch of fruit and the prediction performance was tested with a different batch, which differs in origin and harvest time. Four calibration models were established with Batch 1 kiwifruit to predict SSC, which were based on full spectra (i.e., partial least squares regression (PLSR) model based on full spectra), continuous effective wavelengths (i.e., changeable size moving window-PLSR (CSMW-PLSR) model), and discrete effective wavelengths (i.e., competitive adaptive reweighted sampling-PLSR (CARS-PLSR) model and PLSR-variable importance in projection (PLSR-VIP) model) respectively. The R_v² values of these four models in the internal validation set were 0.83, 0.92, 0.96, and 0.89, with corresponding RMSEV values of 1.08 %, 0.75 %, 0.56 %, and 0.89 %, and RPD_v values of 2.49, 3.61, 4.80, and 3.02, respectively. Clearly, all four PLSR models performed acceptably in the validation set. However, these models performed very poorly in predicting the Batch 2 samples, with their RMSEP values all exceeding 1.5 %. Although the models could not be used to predict exact SSC, they could still interpret the SSC values of Batch 2 kiwifruit to some extent because the predicted SSC values could fit a specific line. To enable the CSMW-PLSR calibration model to predict the SSC of Batch 2 kiwifruit, the robustness of this model was improved by calibration updating and slope/bias correction (SBC). Different numbers of new samples were randomly selected for updating and SBC, and the minimum number of samples for updating and SBC was finally determined to be 30 and 20, respectively. After calibration updating and SBC, the new models had average R_p², average RMSEP, and average RPD_p values of 0.83 and 0.89, 0.69 % and 0.57 %, and 2.45 and 2.97, respectively, in the prediction set. Overall, the methods proposed in this study can effectively address the issue of poor performance of calibration models in predicting new samples with biological variability and make the models more robust, thus providing important guidance for the maintenance of SSC online detection models in practical applications.

Non-destructive prediction and visualization of anthocyanin content in mulberry fruits using hyperspectral imaging

Being rich in anthocyanin is one of the most important physiological traits of mulberry fruits. Efficient and non-destructive detection of anthocyanin content and distribution in fruits is important for the breeding, cultivation, harvesting and selling of them. This study aims at building a fast, non-destructive, and high-precision method for detecting and visualizing anthocyanin content of mulberry fruit by using hyperspectral imaging. Visible near-infrared hyperspectral images of the fruits of two varieties at three maturity stages are collected. Successive projections algorithm (SPA), competitive adaptive reweighted sampling (CARS) and stacked auto-encoder (SAE) are used to reduce the dimension of high-dimensional hyperspectral data. The least squares-support vector machine and extreme learning machine (ELM) are used to build models for predicting the anthocyanin content of mulberry fruit. And genetic algorithm (GA) is used to optimize the major parameters of models. The results show that the higher the anthocyanin content is, the lower the spectral reflectance is. 15, 7 and 13 characteristic variables are extracted by applying CARS, SPA and SAE respectively. The model based on SAE-GA-ELM achieved the best performance with R² of 0.97 and the RMSE of 0.22 mg/g in both the training set and testing set, and it is applied to retrieve the distribution of anthocyanin content in mulberry fruits. By applying SAE-GA-ELM model to each pixel of the mulberry fruit images, distribution maps are created to visualize the changes in anthocyanin content of mulberry fruits at three maturity stages. The overall results indicate that hyperspectral imaging, in combination with SAE-GA-ELM, can help achieve rapid, non-destructive and high-precision detection and visualization of anthocyanin content in mulberry fruits.

Visualization of Sugar Content Distribution of White Strawberry by Near-Infrared Hyperspectral Imaging

In this study, an approach to visualize the spatial distribution of sugar content in white strawberry fruit flesh using near-infrared hyperspectral imaging (NIR-HSI; 913-2166 nm) is developed. NIR-HSI data collected from 180 samples of "Tochigi iW1 go" white strawberries are investigated. In order to recognize the pixels corresponding to the flesh and achene on the surface of the strawberries, principal component analysis (PCA) and image processing are conducted after smoothing and standard normal variate (SNV) pretreatment of the data. Explanatory partial least squares regression (PLSR) analysis is performed to develop an appropriate model to predict Brix reference values. The PLSR model constructed from the raw spectra extracted from the flesh region of interest yields high prediction accuracy with an RMSEP and R2p values of 0.576 and 0.841, respectively, and with a relatively low number of PLS factors. The Brix heatmap images and violin plots for each sample exhibit characteristics feature of sugar content distribution in the flesh of the strawberries. These findings offer insights into the feasibility of designing a noncontact system to monitor the quality of white strawberries.

Hyperspectral Imaging with Machine Learning Approaches for Assessing Soluble Solids Content of Tribute Citru

Tribute Citru is a natural citrus hybrid with plenty of vitamins and nutrients. Fruits' soluble solids content (SSC) is a critical quality index. This study used hyperspectral imaging at two spectral ranges (400-1000 nm and 900-1700 nm) to determine SSC in Tribute Citru. Partial least squares regression (PLSR) and support vector regression (SVR) models were established in order to determine SSC using the spectral information of the calyx and blossom ends. The average spectra of both ends as well as their fusion was studied. The successive projections algorithm (SPA) and the correlation coefficient analysis (CCA) were used to examine the differences in characteristic wavelengths between the two ends. Most models achieved performances with the correlation coefficient of the training, validation, and testing sets over 0.6. Results showed that differences in the performances among the models using the one-sided and two-sided spectral information. No particular regulation could be found for the differences in model performances and characteristic wavelengths. The results illustrated that the sampling side was an influencing factor but not the determinant factor for SSC determination. These results would help with the development of real-world applications for citrus quality inspection without concerning the sampling sides and the spectral ranges.

Near-Infrared Hyperspectral Imaging Pipelines for Pasture Seed Quality Evaluation: An Overview

Near-infrared (800–2500 nm; NIR) spectroscopy coupled to hyperspectral imaging (NIR-HSI) has greatly enhanced its capability and thus widened its application and use across various industries. This non-destructive technique that is sensitive to both physical and chemical attributes of virtually any material can be used for both qualitative and quantitative analyses. This review describes the advancement of NIR to NIR-HSI in agricultural applications with a focus on seed quality features for agronomically important seeds. NIR-HSI seed phenotyping, describing sample sizes used for building high-accuracy calibration and prediction models for full or selected wavelengths of the NIR region, is explored. The molecular interpretation of absorbance bands in the NIR region is difficult; hence, this review offers important NIR absorbance band assignments that have been reported in literature. Opportunities for NIR-HSI seed phenotyping in forage grass seed are described and a step-by-step data-acquisition and analysis pipeline for the determination of seed quality in perennial ryegrass seeds is also presented.

A Rapid Non-Destructive Hyperspectral Imaging Data Model for the Prediction of Pungent Constituents in Dried Ginger

Ginger is best known for its aromatic odour, spicy flavour and health-benefiting properties. Its flavour is derived primarily from two compound classes (gingerols and shogaols), with the overall quality of the product depending on the interaction between these compounds. Consequently, a robust method for determining the ratio of these compounds would be beneficial for quality control purposes. This study investigated the feasibility of using hyperspectral imaging to rapidly determine the ratio of 6-gingerol to 6-shogoal in dried ginger powder. Furthermore, the performance of several pre-processing methods and two multivariate models was explored. The best-performing models used partial least squares regression (PSLR) and least absolute shrinkage and selection operator (LASSO), using multiplicative scatter correction (MSC) and second derivative Savitzky–Golay (2D-SG) pre-processing. Using the full range of wavelengths (~400–1000 nm), the performance was similar for PLSR (R² ≥ 0.73, RMSE ≤ 0.29, and RPD ≥ 1.92) and LASSO models (R² ≥ 0.73, RMSE ≤ 0.29, and RPD ≥ 1.94). These results suggest that hyperspectral imaging combined with chemometric modelling may potentially be used as a rapid, non-destructive method for the prediction of gingerol-to-shogaol ratios in powdered ginger samples.

A Review on the Commonly Used Methods for Analysis of Physical Properties of Food Materials

The chemical composition of any food material can be analyzed well by employing various analytical techniques. The physical properties of food are no less important than chemical composition as results obtained from authentic measurement data are able to provide detailed information about the food. Several techniques have been used for years for this purpose but most of them are destructive in nature. The aim of this present study is to identify the emerging techniques that have been used by different researchers for the analysis of the physical characteristics of food. It is highly recommended to practice novel methods as these are non-destructive, extremely sophisticated, and provide results closer to true quantitative values. The physical properties are classified into different groups based on their characteristics. The concise view of conventional techniques mostly used to analyze food material are documented in this work.

Preliminary Study for Inspecting Moisture Content, Dry Matter Content, and Firmness Parameters of Two Date Cultivars Using an NIR Hyperspectral Imaging System

The assessment and assurance of the quality attributes of dates is a key factor in increasing the competitiveness and consumer acceptance of this fruit. The increasing demand for date fruits requires a rapid and automated method for monitoring and analyzing the quality attributes of date fruits to replace the conventional methods used by inspection which limits the production and involves human errors. Moisture content (MC), dry matter content (DMC), and firmness (F) are three important quality attributes for two date cultivars (Khalas and Sukkari) that have been inspected using the hyperspectral imaging (HSI) technique based on the reflectance mode. Images of intact date fruits at the maturity stage Tamr were obtained within the wavelength range of 950–1750 nm. Monitoring and assessment of MC, DMC, and F [first maximum rupture force (MF, N)] were performed using a partial least squares regression model. Accurate prediction models were attained. The results highlight that the coefficients of determination (R²_Prediction) are estimated to be 0.91 and 0.89 for MC, DMC, and F (N) with the lowest values of the standard error of prediction (SEP) equal to 0.82, 0.81 (%), and 4.12 (N), respectively, and the residual predictive deviation (RPD) values were 3.65, 3.69, and 3.42 for MC, DMC, and F (N), respectively. The results obtained from this preliminary study indicate the great potential of applying HSI for the assessment of physical, chemical, and sensory quality attributes of date fruits overall in the five maturity stages.

Multi-product calibration model for soluble solids and water content quantification in Cucurbitaceae family, using visible/near-infrared spectroscopy

Latest studies on Vis/NIR research mostly focused on particular products. Developing a model for a specific product is costly and laborious. This study utilized visible/near-infrared (Vis/NIR) spectroscopy to evaluate the quality attributes of six products of the Cucurbitaceae family, with a single estimation model, rather than individually. The study made use of six intact products, zucchini, bitter gourd, ridge gourd, melon, chayote, and cucumber. Subsequently, the multi-product models for soluble solids content (SSC) and water content were created using partial least squares regression (PLSR) method. The PLSR modeling produced satisfactory results, the coefficient of determination in calibration set (R2c) was discovered to be 0.95 and 0.92, while the root mean squares error of calibration (RMSEC) was found to be 0.41 and 0.61, for SSC and water content, respectively. These models were able to accurately predict the unknown samples with coefficient of determination in prediction set (R2p) of 0.96 and 0.92, as well as root mean squares error of prediction (RMSEP) of 0.32 and 0.58, while the ratio of prediction to deviation (RPD) was found to be 5.68 and 3.69 for SSC and water content, respectively. This shows Vis/NIR spectroscopy was able to quantify the SSC and water content of six products of Cucurbitaceae family, using a single model.

Review: Application of Artificial Intelligence in Phenomics

Plant phenomics has been rapidly advancing over the past few years. This advancement is attributed to the increased innovation and availability of new technologies which can enable the high-throughput phenotyping of complex plant traits. The application of artificial intelligence in various domains of science has also grown exponentially in recent years. Notably, the computer vision, machine learning, and deep learning aspects of artificial intelligence have been successfully integrated into non-invasive imaging techniques. This integration is gradually improving the efficiency of data collection and analysis through the application of machine and deep learning for robust image analysis. In addition, artificial intelligence has fostered the development of software and tools applied in field phenotyping for data collection and management. These include open-source devices and tools which are enabling community driven research and data-sharing, thereby availing the large amounts of data required for the accurate study of phenotypes. This paper reviews more than one hundred current state-of-the-art papers concerning AI-applied plant phenotyping published between 2010 and 2020. It provides an overview of current phenotyping technologies and the ongoing integration of artificial intelligence into plant phenotyping. Lastly, the limitations of the current approaches/methods and future directions are discussed.

Variation in the terminology and methodologies applied to the analysis of water holding capacity in meat research

Studies examining meat quality variation, possibly resulting from animal physiology, processing, or ingredient additions, are likely to include at least one measure of water holding capacity (WHC). Methods for evaluating WHC can be classified as direct or indirect. Direct methods either gauge natural release of fluids from muscle or require the application of force to express water. The indirect methods do not actually measure WHC. They attempt to separate meat into two or three categories based on predictions of direct method results: the extreme of high and low WHC and an optional 'normal' group. Considerable statistical analyses are required to generate these predictive models. Presently, there are inconsistent terms (e.g., water holding, WHC, water binding, water binding potential/capacity) used to describe WHC and no standardized techniques recommended to evaluate it. To ensure that results can be compared across different laboratories, a better consensus must be reached in how these terms are employed and how this critical parameter is determined.

High-Throughput Phenotyping: A Platform to Accelerate Crop Improvement

Development of high-throughput phenotyping technologies has progressed considerably in the last 10 years. These technologies provide precise measurements of desired traits among thousands of field-grown plants under diversified environments; this is a critical step towards selection of better performing lines as to yield, disease resistance, and stress tolerance to accelerate crop improvement programs. High-throughput phenotyping techniques and platforms help unraveling the genetic basis of complex traits associated with plant growth and development and targeted traits. This review focuses on the advancements in technologies involved in high-throughput, field-based, aerial, and unmanned platforms. Development of user-friendly data management tools and softwares to better understand phenotyping will increase the use of field-based high-throughput techniques, which have potential to revolutionize breeding strategies and meet the future needs of stakeholders.

Development of a Low-Cost Narrow Band Multispectral Imaging System Coupled with Chemometric Analysis for Rapid Detection of Rice False Smut in Rice Seed

Spectral imaging is a promising technique for detecting the quality of rice seeds. However, the high cost of the system has limited it to more practical applications. The study was aimed to develop a low-cost narrow band multispectral imaging system for detecting rice false smut (RFS) in rice seeds. Two different cultivars of rice seeds were artificially inoculated with RFS. Results have demonstrated that spectral features at 460, 520, 660, 740, 850, and 940 nm were well linked to the RFS. It achieved an overall accuracy of 98.7% with a false negative rate of 3.2% for Zheliang, and 91.4% with 6.7% for Xiushui, respectively, using the least squares-support vector machine. Moreover, the robustness of the model was validated through transferring the model of Zheliang to Xiushui with the overall accuracy of 90.3% and false negative rate of 7.8%. These results demonstrate the feasibility of the developed system for RFS identification with a low detecting cost.

Determination of Total Polysaccharides and Total Flavonoids in Chrysanthemum morifolium Using Near-Infrared Hyperspectral Imaging and Multivariate Analysis

The rapid and nondestructive determination of active compositions in Chrysanthemum morifolium (Hangbaiju) is of great value for producers and consumers. Hyperspectral imaging as a rapid and nondestructive technique was used to determine total polysaccharides and total flavonoids content in Chrysanthemum morifolium. Hyperspectral images of different sizes of Chrysanthemum morifolium flowers were acquired. Pixel-wise spectra within all samples were preprocessed by wavelet transform (WT) followed by standard normal variate (SNV). Partial least squares (PLS) and least squares-support vector machine (LS-SVM) were used to build prediction models using sample average spectra calculated by preprocessed pixel-wise spectra. The LS-SVM model performed better than the PLS models, with the determination of the coefficient of calibration (R²c) and prediction (R²p) being over 0.90 and the residual predictive deviation (RPD) being over 3 for total polysaccharides and total flavonoids content prediction. Prediction maps of total polysaccharides and total flavonoids content in Chrysanthemum morifolium flowers were successfully obtained by LS-SVM models, which exhibited the best performances. The overall results showed that hyperspectral imaging was a promising technique for the rapid and accurate determination of active ingredients in Chrysanthemum morifolium, indicating the great potential to develop an online system for the quality determination of Chrysanthemum morifolium.