Remotely Triggered Locomotion of Hydrogel Mag-bots in Confined Spaces

Optimal crawling: From mechanical to chemical actuation

Taking inspiration from the crawling motion of biological cells on a substrate, we consider a physical model of self-propulsion where the spatiotemporal driving can involve both a mechanical actuation by active force couples and a chemical actuation through controlled mass turnover. When the material turnover is slow and the mechanical driving dominates, we find that the highest velocity at a given energetic cost is reached when the actuation takes the form of an active force configuration propagating as a traveling wave. As the rate of material turnover increases, and the chemical driving starts to dominate the mechanical one, such a peristalsis-type control progressively loses its efficacy, yielding to a standing-wave-type driving which involves an interplay between the mechanical and chemical actuation. Our analysis suggests a paradigm for the optimal design of crawling biomimetic robots where the conventional purely mechanical driving through distributed force actuators is complemented by a distributed chemical control of the material remodeling inside the force-transmitting machinery.

Solvent-adaptive hydrogels with lamellar confinement cellular structure for programmable multimodal locomotion

Biological organisms can perform flexible and controllable multimodal motion under external stimuli owing to the hierarchical assembly of anisotropic structures across multiple length scales. However, artificial soft actuators exhibit the limited response speed, deformation programmability and movement capability especially in harsh environments because of insufficient anisotropic hierarchy and precision in structural design. Here, we report a programmed assembly directed confinement polymerization method for the fabrication of environmentally tolerant and fast responsive hydrogels with lamellar assembly-confined cellular structure interpenetrated with highly aligned nanopillars by the directional freezing-assisted polymerization in the predesigned anisotropic laminar scaffold. The obtained hydrogel exhibits ultrafast responsiveness and anisotropic deformation exposed to temperature/light/solvent stimulation, maintaining highly consistent responsive deformation capability in all-polarity solvents over 100 days of soaking. Moreover, the hydrogels implement photoactive programmable multi-gait locomotion whose amplitude and directionality are precisely regulated by the intrinsic structure, including controlled crawling and rotation in water and non-polar solvents, and 3D self-propulsion floating and swimming in polar solvents. Thus, this hydrogel with hierarchically ordered structure and dexterous locomotion may be suitable for flexible intelligent actuators serving in harsh solvent environments.

Programming Motion into Materials Using Electricity-Driven Liquid Crystal Elastomer Actuators

As thermally driven smart materials capable of large reversible deformations, liquid crystal elastomers (LCEs) have great potential for applications in bionic soft robots, artificial muscles, controllable actuators, and flexible sensors due to their ability to program controllable motion into materials. In this article, we introduce conductive LCE actuators using a liquid metal electrothermal layer and a polyethylene terephthalate substrate. Our LCE actuators can be stimulated at low currents from 2 to 4 A and produce a maximum work density of 9.4 k J ∕ m 3 . We illustrate the potential applications of this system by designing a palm-activated artificial muscle gripper, which can be used to grasp soft objects ranging from 5 to 55 mm in size, and even ring-shaped workpieces with precise external or internal support. Furthermore, inspired by the movement of fruit fly larvae, we designed a new soft robot capable of bioinspired crawling and turning by inducing anisotropic friction with an asymmetric design. Finally, we illustrate advanced motional control by designing an autonomously rotating wheel based on the asymmetric contraction of its spokes. To assist in the production of autonomously moving robots, we provide a thorough characterization of its motion dynamics.

Nanocomposite Hydrogel Actuators with Ordered Structures: From Nanoscale Control to Macroscale Deformations

Flexible intelligent actuators with the characteristics of flexibility, safety and scalability, are highly promising in industrial production, biomedical fields, environmental monitoring, and soft robots. Nanocomposite hydrogels are attractive candidates for soft actuators due to their high pliability, intelligent responsiveness, and capability to execute large-scale rapid reversible deformations under external stimuli. Here, the recent advances of nanocomposite hydrogels as soft actuators are reviewed and focus is on the construction of elaborate and programmable structures by the assembly of nano-objects in the hydrogel matrix. With the help of inducing the gradient or oriented distributions of the nanounits during the gelation process by the external forces or molecular interactions, nanocomposite hydrogels with ordered structures are achieved, which can perform bending, spiraling, patterned deformations, and biomimetic complex shape changes. Given great advantages of these intricate yet programmable shape-morphing, nanocomposite hydrogel actuators have presented high potentials in the fields of moving robots, energy collectors, and biomedicines. In the end, the challenges and future perspectives of this emerging field of nanocomposite hydrogel actuators are proposed.

Tailoring the Swelling-Shrinkable Behavior of Hydrogels for Biomedical Applications

Hydrogels with tailor-made swelling-shrinkable properties have aroused considerable interest in numerous biomedical domains. For example, as swelling is a key issue for blood and wound extrudates absorption, the transference of nutrients and metabolites, as well as drug diffusion and release, hydrogels with high swelling capacity have been widely applicated in full-thickness skin wound healing and tissue regeneration, and drug delivery. Nevertheless, in the fields of tissue adhesives and internal soft-tissue wound healing, and bioelectronics, non-swelling hydrogels play very important functions owing to their stable macroscopic dimension and physical performance in physiological environment. Moreover, the negative swelling behavior (i.e., shrinkage) of hydrogels can be exploited to drive noninvasive wound closure, and achieve resolution enhancement of hydrogel scaffolds. In addition, it can help push out the entrapped drugs, thus promote drug release. However, there still has not been a general review of the constructions and biomedical applications of hydrogels from the viewpoint of swelling-shrinkable properties. Therefore, this review summarizes the tactics employed so far in tailoring the swelling-shrinkable properties of hydrogels and their biomedical applications. And a relatively comprehensive understanding of the current progress and future challenge of the hydrogels with different swelling-shrinkable features is provided for potential clinical translations.

Biomedical Applications of Deformable Hydrogel Microrobots

Hydrogel, a material with outstanding biocompatibility and shape deformation ability, has recently become a hot topic for researchers studying innovative functional materials due to the growth of new biomedicine. Due to their stimulus responsiveness to external environments, hydrogels have progressively evolved into "smart" responsive (such as to pH, light, electricity, magnetism, temperature, and humidity) materials in recent years. The physical and chemical properties of hydrogels have been used to construct hydrogel micro-nano robots which have demonstrated significant promise for biomedical applications. The different responsive deformation mechanisms in hydrogels are initially discussed in this study; after which, a number of preparation techniques and a variety of structural designs are introduced. This study also highlights the most recent developments in hydrogel micro-nano robots' biological applications, such as drug delivery, stem cell treatment, and cargo manipulation. On the basis of the hydrogel micro-nano robots' current state of development, current difficulties and potential future growth paths are identified.

Kinematic Behavior of an Untethered, Small-Scale Hydrogel-Based Soft Robot in Response to Magneto-Thermal Stimuli

Fruit fly larvae, which exist widely in nature, achieve peristaltic motion via the contraction and elongation of their bodies and the asymmetric friction generated by the front and rear parts of their bodies when they are in contact with the ground. Herein, we report the development of an untethered, magnetic, temperature-sensitive hydrogel-based soft robot that mimics the asymmetric micro-patterns of fruit-fly-larvae gastropods and utilizes cyclic deformation to achieve directional peristaltic locomotion. Due to Néel relaxation losses of nanomagnetic Fe3O4 particles, the hydrogel-based soft robot is capable of converting changes in external alternating magnetic stimuli into contracting and expanding deformation responses which can be remotely controlled via a high-frequency alternating magnetic field (AMF) to realize periodic actuation. Furthermore, the Fe3O4 particles included in the hydrogel-based soft robot cause it to follow a gradient magnetic field in confined liquid environments and can be coupled with AMFs for the targeted release of water-soluble drugs or targeted magnetic hyperthermia therapy (MHT). We believe that such a controlled motion can enable highly targeted drug delivery, as well as vascular disease detection and thrombus removal tasks, without the use of invasive procedures.

Untethered unidirectionally crawling gels driven by asymmetry in contact forces

Reversible thermoresponsive hydrogels, which swell and shrink (deswell) in the temperature range of 30° to 60°C, provide an attractive material class for operating untethered soft robots in human physiological and ambient conditions. Crawling has been demonstrated previously with thermoresponsive hydrogels but required patterned or constrained gels or substrates to break symmetry for unidirectional motion. Here, we demonstrate a locomotion mechanism for unidirectionally crawling gels driven by spontaneous asymmetries in contact forces during swelling and deswelling of segmented active thermoresponsive poly( N -isopropylacrylamide) (pNIPAM) and passive polyacrylamide (pAAM) bilayers with suspended linkers. Actuation studies demonstrate the consistent unidirectional movement of these gel crawlers across multiple thermal cycles on flat, unpatterned substrates. We explain the mechanism using finite element simulations and by varying experimental parameters such as the linker stiffness and the number of bilayer segments. We elucidate design criteria and validate experiments using image analysis and finite element models. We anticipate that this mechanism could potentially be applied to other shape-changing locomotors.

Locomotion of an untethered, worm-inspired soft robot driven by a shape-memory alloy skeleton

Soft, worm-like robots show promise in complex and constrained environments due to their robust, yet simple movement patterns. Although many such robots have been developed, they either rely on tethered power supplies and complex designs or cannot move external loads. To address these issues, we here introduce a novel, maggot-inspired, magnetically driven “mag-bot” that utilizes shape memory alloy-induced, thermoresponsive actuation and surface pattern-induced anisotropic friction to achieve locomotion inspired by fly larvae. This simple, untethered design can carry cargo that weighs up to three times its own weight with only a 17% reduction in speed over unloaded conditions thereby demonstrating, for the first time, how soft, untethered robots may be used to carry loads in controlled environments. Given their small scale and low cost, we expect that these mag-bots may be used in remote, confined spaces for small objects handling or as components in more complex designs.

Thermosensitive P(AAc-co-NIPAm) hydrogels display enhanced toughness and self-healing via ion-ligand interactions

Hydrogels containing thermosensitive polymers such as poly(N-isopropylacrylamide) (P(NIPAm)) may contract during heating and show great promise in fields ranging from soft robotics to thermosensitive biosensors. However, these gels often exhibit low stiffness, tensile strength, and mechanical toughness, limiting their applicability. Through copolymerization of P(NIPAm) with poly(Acrylic acid) (P(AAc)) and introduction of ferric ions (Fe³⁺ ) that coordinate with functional groups along the P(AAc) chains, we here introduce a thermoresponsive hydrogel with significantly enhanced mechanical extensibility, strength, and toughness. Using both experimentation and constitutive modeling, we find that increasing the ratio of m(AAc):m(NIPAm) in the prepolymer decreases strength and toughness but improves extensibility. In contrast, increasing Fe³⁺ concentration generally improves strength and toughness with little decrease in extensibility. Due to reversible coordination of the Fe³⁺ bonds, these gels display excellent recovery of mechanical strength during cyclic loading and self-healing ability. While thermosensitive contraction imbued by the underlying P(NIPAm) is reduced slightly with increased Fe³⁺ concentration, the temperature transition range is widened and shifted upwards towards that of human body temperature (between 30 and 40°C), perhaps rendering these gels suitable as in vivo biosensors. Finally, these gels display excellent adsorptive properties with a variety of materials, rendering them possible candidates in adhesive applications. This article is protected by copyright. All rights reserved.

Recent Advances in Polymer Additive Engineering for Diagnostic and Therapeutic Hydrogels

Hydrogels are hydrophilic polymer materials that provide a wide range of physicochemical properties as well as are highly biocompatible. Biomedical researchers are adapting these materials for the ever-increasing range of design options and potential applications in diagnostics and therapeutics. Along with innovative hydrogel polymer backbone developments, designing polymer additives for these backbones has been a major contributor to the field, especially for expanding the functionality spectrum of hydrogels. For the past decade, researchers invented numerous hydrogel functionalities that emerge from the rational incorporation of additives such as nucleic acids, proteins, cells, and inorganic nanomaterials. Cases of successful commercialization of such functional hydrogels are being reported, thus driving more translational research with hydrogels. Among the many hydrogels, here we reviewed recently reported functional hydrogels incorporated with polymer additives. We focused on those that have potential in translational medicine applications which range from diagnostic sensors as well as assay and drug screening to therapeutic actuators as well as drug delivery and implant. We discussed the growing trend of facile point-of-care diagnostics and integrated smart platforms. Additionally, special emphasis was given to emerging bioinformatics functionalities stemming from the information technology field, such as DNA data storage and anti-counterfeiting strategies. We anticipate that these translational purpose-driven polymer additive research studies will continue to advance the field of functional hydrogel engineering.

Programmable Mechanically Active Hydrogel-Based Materials

Programmable mechanically active materials (MAMs) are defined as materials that can sense and transduce external stimuli into mechanical outputs or conversely that can detect mechanical stimuli and respond through an optical change or other change in the appearance of the material. Programmable MAMs are a subset of responsive materials and offer potential in next generation robotics and smart systems. This review specifically focuses on hydrogel-based MAMs because of their mechanical compliance, programmability, biocompatibility, and cost-efficiency. First, the composition of hydrogel MAMs along with the top-down and bottom-up approaches used for programming these materials are discussed. Next, the fundamental principles for engineering responsivity in MAMS, which includes optical, thermal, magnetic, electrical, chemical, and mechanical stimuli, are considered. Some advantages and disadvantages of different responsivities are compared. Then, to conclude, the emerging applications of hydrogel-based MAMs from recently published literature, as well as the future outlook of MAM studies, are summarized.

Solar-Driven Soft Robots

Stimuli-responsive materials have been lately employed in soft robotics enabling new classes of robots that can emulate biological systems. The untethered operation of soft materials with high power light, magnetic field, and electric field has been previously demonstrated. While electric and magnetic fields can be stimulants for untethered actuation, their rapid decay as a function of distance limits their efficacy for long-range operations. In contrast, light-in the form of sunlight or collimated from an artificial source (e.g., laser, Xenon lamps)-does not decay rapidly, making it suitable for long-range excitation of untethered soft robots. In this work, an approach to harnessing sunlight for the untethered operation of soft robots is presented. By employing a selective solar absorber film and a low-boiling point (34 °C) fluid, light-operated soft robotic grippers are demonstrated, grasping and lifting objects almost 25 times the mass of the fluid in a controllable fashion. The method addresses one of the salient challenges in the field of untethered soft robotics. It precludes the use of bulky peripheral components (e.g., compressors, valves, or pressurized gas tank) and enables the untethered long-range operation of soft robots.

Materials engineering, processing, and device application of hydrogel nanocomposites

Hydrogels are widely implemented as key materials in various biomedical applications owing to their soft, flexible, hydrophilic, and quasi-solid nature. Recently, however, new material properties over those of bare hydrogels have been sought for novel applications. Accordingly, hydrogel nanocomposites, i.e., hydrogels converged with nanomaterials, have been proposed for the functional transformation of conventional hydrogels. The incorporation of suitable nanomaterials into the hydrogel matrix allows the hydrogel nanocomposite to exhibit multi-functionality in addition to the biocompatible feature of the original hydrogel. Therefore, various hydrogel composites with nanomaterials, including nanoparticles, nanowires, and nanosheets, have been developed for diverse purposes, such as catalysis, environmental purification, bio-imaging, sensing, and controlled drug delivery. Furthermore, novel technologies for the patterning of such hydrogel nanocomposites into desired shapes have been developed. The combination of such material engineering and processing technologies has enabled the hydrogel nanocomposite to become a key soft component of electronic, electrochemical, and biomedical devices. We herein review the recent research trend in the field of hydrogel nanocomposites, particularly focusing on materials engineering, processing, and device applications. Furthermore, the conclusions are presented with the scope of future research outlook, which also includes the current technical limitations.

Photoresponsive Hydrogel Microcrawlers Exploit Friction Hysteresis to Crawl by Reciprocal Actuation

Mimicking the locomotive abilities of living organisms on the microscale, where the downsizing of rigid parts and circuitry presents inherent problems, is a complex feat. In nature, many soft-bodied organisms (inchworm, leech) have evolved simple, yet efficient locomotion strategies in which reciprocal actuation cycles synchronize with spatiotemporal modulation of friction between their bodies and environment. We developed microscopic (∼100 μm) hydrogel crawlers that move in aqueous environment through spatiotemporal modulation of the friction between their bodies and the substrate. Thermo-responsive poly-n-isopropyl acrylamide hydrogels loaded with gold nanoparticles shrink locally and reversibly when heated photothermally with laser light. The out-of-equilibrium collapse and reswelling of the hydrogel is responsible for asymmetric changes in the friction between the actuating section of the crawler and the substrate. This friction hysteresis, together with off-centered irradiation, results in directional motion of the crawler. We developed a model that predicts the order of magnitude of the crawler motion (within 50%) and agrees with the observed experimental trends. Crawler trajectories can be controlled enabling applications of the crawler as micromanipulator that can push small cargo along a surface.

Actuation of untethered pneumatic artificial muscles and soft robots using magnetically induced liquid-to-gas phase transitions

Pneumatic artificial muscles have been widely used in industry because of their simple and relatively high-performance design. The emerging field of soft robotics has also been using pneumatic actuation mechanisms since its formation. However, these actuators/soft robots often require bulky peripheral components to operate. Here, we report a simple mechanism and design for actuating pneumatic artificial muscles and soft robotic grippers without the use of compressors, valves, or pressurized gas tanks. The actuation mechanism involves a magnetically induced liquid-to-gas phase transition of a liquid that assists the formation of pressure inside the artificial muscle. The volumetric expansion in the liquid-to-gas phase transition develops sufficient pressure inside the muscle for mechanical operations. We integrated this actuation mechanism into a McKibben-type artificial muscle and soft robotic arms. The untethered McKibben artificial muscle generated actuation strains of up to 20% (in 10 seconds) with associated work density of 40 kilojoules/meter3, which favorably compares with the peak strain and peak energy density of skeletal muscle. The untethered soft robotic arms demonstrated lifting objects with an input energy supply from only two Li-ion batteries.

Microwave induced mechanical activation of hydrogel dimers

When grape-sized aqueous dimers are irradiated in a microwave oven, an intense electromagnetic hotspot forms at their point of contact, often igniting a plasma. Here we show that this irradiation can result in the injection of mechanical energy. By examining irradiated hydrogel dimers through high-speed imaging, we find that they repeatedly bounce off of each other while irradiated. We determine that an average of 1 μJ of mechanical energy is injected into the pair during each collision. Furthermore, a characteristic high-pitched audio signal is found to accompany each collision. We show that both the audio signal and the energy injection arise via an interplay between vaporization and elastic deformations in the region of contact, the so-called 'elastic Liedenfrost effect'. Our results establish a novel, non-contact method of injecting mechanical energy into soft matter systems, suggesting application in fields such as soft robotics.

On the blistering of thermo-sensitive hydrogel: the volume phase transition and mechanical instability

This paper explores the physical mechanisms responsible for the appearance of small blisters on the surface of temperature sensitive hydrogels as they deswell rapidly during their volume phase transition. For this, we develop a numerical model that couples the processes of hydrogel deswelling and blister growth due to the existence of a thin quasi-impermeable layer on its surface. The model points out that blister inflation originates at defects point under the gel's surface, under the effect of the increasing osmotic pressure in the gel as it undergoes its phase transition. Due to their large deformation, these blisters often experience a mechanical instability that triggers a sudden increase in their growth rate at the expense of their closest neighbors. Using a simple computational model, we then show that blisters are able to communicate via internal pressure and that these interactions are mediated by two characteristic time scales related to solvent transport within and between adjacent blisters. Our study finally indicates that these mechanisms can be controlled by temperature and the gel's cross-link density to achieve diversity of blister patterns on the gel's surface. The proposed analysis provides predictions that agree well with experimental observations of NiPAm gels which deswell in various conditions.

Nanocomposite hydrogel actuators hybridized with various dimensional nanomaterials for stimuli responsiveness enhancement

Hydrogel actuators, that convert external energy, such as pH, light, heat, magnetic field, and ion strength, into mechanical motion, have been utilized in sensors, artificial muscles, and soft robotics. For a practicality of the hydrogel actuators in a wide range of fields, an establishment of robust mechanical properties and rapid response are required. Several solutions have been proposed, for example, setting porous and anisotropy structures to hydrogels with nanocomposite materials to improve the response speed and deformation efficiency. In this review paper, we focused on hydrogel actuators including various nanocomposite by categorizing the dimensional aspects of additive materials. Moreover, we described the role of diverse additive materials in terms of the improvement of mechanical property and deformation efficiency of the hydrogel actuators. We assumed that this review will provide a beneficial guidance for strategies of developing nanocomposite hydrogel actuators and outlooks for the future research directions.

Hydrogels and Their Applications in Targeted Drug Delivery

Conventional drug delivery approaches are plagued by issues pertaining to systemic toxicity and repeated dosing. Hydrogels offer convenient drug delivery vehicles to ensure these disadvantages are minimized and the therapeutic benefits from the drug are optimized. With exquisitely tunable physical properties that confer them great controlled drug release features and the merits they offer for labile drug protection from degradation, hydrogels emerge as very efficient drug delivery systems. The versatility and diversity of the hydrogels extend their applications beyond targeted drug delivery also to wound dressings, contact lenses and tissue engineering to name but a few. They are 90% water, and highly porous to accommodate drugs for delivery and facilitate controlled release. Herein we discuss hydrogels and how they could be manipulated for targeted drug delivery applications. Suitable examples from the literature are provided that support the recent advancements of hydrogels in targeted drug delivery in diverse disease areas and how they could be suitably modified in very different ways for achieving significant impact in targeted drug delivery. With their enormous amenability to modification, hydrogels serve as promising delivery vehicles of therapeutic molecules in several disease conditions, including cancer and diabetes.

Biological active matter aggregates: Inspiration for smart colloidal materials

Aggregations of social organisms exhibit a remarkable range of properties and functionalities. Multiple examples, such as fire ants or slime mold, show how a population of individuals is able to overcome an existential threat by gathering into a solid-like aggregate with emergent functionality. Surprisingly, these aggregates are driven by simple rules, and their mechanisms show great parallelism among species. At the same time, great effort has been made by the scientific community to develop active colloidal materials, such as microbubbles or Janus particles, which exhibit similar behaviors. However, a direct connection between these two realms is still not evident, and it would greatly benefit future studies. In this review, we first discuss the current understanding of living aggregates, point out the mechanisms in their formation and explore the vast range of emergent properties. Second, we review the current knowledge in aggregated colloidal systems, the methods used to achieve the aggregations and their potential functionalities. Based on this knowledge, we finally identify a set of over-arching principles commonly found in biological aggregations, and further suggest potential future directions for the creation of bio-inspired colloid aggregations.

How do fire ants control the rheology of their aggregations? A statistical mechanics approach

Active networks are omnipresent in nature, from the molecular to the macro-scale. In this study, we explore the mechanical behaviour of fire ant aggregations, closely knit swarms that display impressive dynamics culminating with the aggregations' capacity to self-heal and adapt to the environment. Although the combined elasticity and rheology of the ant aggregation can be characterized by phenomenological mechanical models (e.g. linear Maxwell or Kelvin-Voigt model), it is not clear how the behaviour of individual ants affects the aggregations' emerging responses. Here, we explore an alternative way to think about these materials, describing them as a collection of individuals connected via elastic chains that associate and dissociate over time. Using our knowledge of these connections-e.g. their elasticity and attachment/dissociation rates-we construct a statistical description of connection stretch and derive an evolution equation for the corresponding stretch distribution. This time-evolving stretch distribution is then used to determine important macroscopic measures, e.g. stress, energy storage and energy dissipation, in the network. In this context, we show how the physical characteristics and activities of individual ants can explain the elasticity, flow and shear thinning of the aggregation. In particular, we find that experimental results are matched if the detachment rate between two individuals increases with tension in the connection.

Statistical Damage Mechanics of Polymer Networks

The macroscopic mechanical response of polymers can be traced down to the microscale physics of the network by using a statistical approach for the description of the configuration state of the polymer chains. In this paper we present a micromechanical model to capture the macroscopic behavior of polymers by tracking the evolution of a distribution function describing chain configurations, more specifically the statistics of the end-to-end distance on the network chains. Damage, manifested in the softening and hysteresis under cyclic loading, is accounted for through the scission of chains, whose occurrence is evaluated on the basis of the probability of failure, also settled in the configuration space. The proposed micromechanical model can easily accommodate also the mechanics of dynamic network with reversible cross-links, thereby providing a general and physics-based approach to the study of polymers and polymer-like materials.