Replication of biocompatible, nanotopographic surfaces

Assessing the stability of azopolymer nanotopography during live-cell fluorescence imaging

Introduction

Photomodifiable azopolymer nanotopographies represent a powerful means of assessing how cells respond to rapid changes in the local microenvironment. However, previous studies have suggested that azopolymers are readily photomodified under typical fluorescence imaging conditions over much of the visible spectrum. Here we assess the stability of azopolymer nanoridges under 1-photon and 2-photon imaging over a broad range of wavelengths.

Methods

Azopolymer nanoridges were created via microtransfer molding of master structures that were created using interference lithography. The effects of exposure to a broad range of wavelengths of light polarized parallel to the ridges were assessed on both a spinning-disk confocal microscope and a 2-photon fluorescence microscope. Experiments with live Dictyostelium discoideum cells were also performed using alternating cycles of 514-nm light for photomodification and 561-nm light for fluorescence imaging.

Results and Discussion

We find that for both 1-photon and 2-photon imaging, only a limited range of wavelengths of light leads to photomodification of the azopolymer nanotopography. These results indicate that nondestructive 1-photon and 2-photon fluorescence imaging can be performed over a considerably broader range of wavelengths than would be suggested by previous research.

Investigation of synergic effects of nanogroove topography and polyaniline-chitosan nanocomposites on PC12 cell differentiation and axonogenesis

Axonal damage is the main characteristic of neurodegenerative diseases. This research was focused on remodeling cell morphology and developing a semi-tissue nanoenvironment via mechanobiological stimuli. The combination of nanogroove topography and polyaniline-chitosan enabled the manipulation of the cells by changing the morphology of PC12 cells to spindle shape and inducing the early stage of signal transduction, which is vital for differentiation. The nanosubstarte embedded with nanogooves induced PC12 cells to elongate their morphology and increase their size by 51% as compared with controls. In addition, the use of an electroconductive nanocomposite alongside nanogrooves resulted in the differentiation of PC12 cells into neurons with an average length of 193 ± 7 μm for each axon and an average number of seven axons for each neurite. Our results represent a combined tool to initiate a promising future for cell reprogramming by inducing cell differentiation and specific cellular morphology in many cases, including neurodegenerative diseases.

Electrical stimulation induces anti-tumor immunomodulation via a flexible microneedle-array-integrated interdigital electrode

Immunotherapy has revolutionized cancer therapy, using chemical or biological agents to reinvigorate the immune system. However, most of these agents have poor tumor penetration and inevitable side effects that complicate therapeutic outcomes. Electrical stimulation (ES) is a promising alternative therapy against cancers that does not involve chemical or biological agents but is limited in the fabrication and operation of complex micrometer-scale ES devices. Here, we present an optically microprinted flexible interdigital electrode with a gold-plated polymer microneedle array to generate alternating electric fields for cancer treatment. A flexible microneedle-array-integrated interdigital electrode (FMIE) was fabricated by combining optical 3D microprinting and electroless plating processes. FMIE-mediated ES of cancer cells induced necrotic cell death through mitochondrial Ca2+ overload and increased intracellular reactive oxygen species (ROS) production. This led to the release of damage-associated molecular patterns that activated the immune response and potentiated immunogenic cell death (ICD). FMIE-based ES has an excellent safety profile and systemic anti-tumor effects, inhibiting the growth of primary and distant tumors as well as melanoma lung metastasis. FMIE-based ES-driven cancer immunomodulation provides a new pathway for drug-free cancer therapy.

Nanotopography modulates cytoskeletal organization and dynamics during T cell activation

Exposure to MHC-antigen complexes on the surface of antigen-presenting cells (APCs) activates T cells, inducing the formation of the immune synapse (IS). Antigen detection at the APC surface is thus a critical step in the adaptive immune response. The physical properties of antigen-presenting surfaces encountered by T cells in vivo are believed to modulate T cell activation and proliferation. Although stiffness and ligand mobility influence IS formation, the effect of the complex topography of the APC surface on this process is not well understood. Here we investigate how nanotopography modulates cytoskeletal dynamics and signaling during the early stages of T cell activation using high-resolution fluorescence microscopy on nanofabricated surfaces with parallel nanoridges of different spacings. We find that although nanoridges reduce the maximum spread area as compared with cells on flat surfaces, the ridges enhance the accumulation of actin and the signaling kinase ZAP-70 at the IS. Actin polymerization is more dynamic in the presence of ridges, which influence the directionality of both actin flows and microtubule (MT) growth. Our results demonstrate that the topography of the activating surface exerts both global effects on T cell morphology and local changes in actin and MT dynamics, collectively influencing T cell signaling.

3D printing of nanowrinkled architectures via laser direct assembly

Structural wrinkles in nature have been widely imitated to enhance the surface functionalities of objects, especially three-dimensional (3D) architectured wrinkles, holding promise for emerging applications in mechanical, electrical, and biological processes. However, the fabrication of user-defined 3D nanowrinkled architectures is a long-pending challenge. Here, we propose a bottom-up laser direct assembly strategy to fabricate multidimensional nanowrinkled architectures in a single-material one-step process. Through the introduction of laser-induced thermal transition into a 3D nanoprinting process for leading the point-by-point nanoscale wrinkling and the self-organization of wrinkle structures, we have demonstrated the program-controlled and on-demand fabrication of multidimensional nanowrinkled structures. Moreover, the precise control of wrinkle morphology with an optimal wavelength of 40 nanometers and the regulation of the dynamic transformation of wrinkled cellular microstructures via interfacial stress mismatch engineering have been achieved. This study provides a universal protocol for constructing nearly arbitrary nanowrinkled architectures and facilitates a new paradigm in nanostructure manufacturing.

Biomaterials to enhance stem cell transplantation

The successful transplantation of stem cells has the potential to transform regenerative medicine approaches and open promising avenues to repair, replace, and regenerate diseased, damaged, or aged tissues. However, pre-/post-transplantation issues of poor cell survival, retention, cell fate regulation, and insufficient integration with host tissues constitute significant challenges. The success of stem cell transplantation depends upon the coordinated sequence of stem cell renewal, specific lineage differentiation, assembly, and maintenance of long-term function. Advances in biomaterials can improve pre-/post-transplantation outcomes by integrating biophysiochemical cues and emulating tissue microenvironments. This review highlights leading biomaterials-based approaches for enhancing stem cell transplantation.

Actin Dynamics as a Multiscale Integrator of Cellular Guidance Cues

Migrating cells must integrate multiple, competing external guidance cues. However, it is not well understood how cells prioritize among these cues. We investigate external cue integration by monitoring the response of wave-like, actin-polymerization dynamics, the driver of cell motility, to combinations of nanotopographies and electric fields in neutrophil-like cells. The electric fields provide a global guidance cue, and approximate conditions at wound sites in vivo. The nanotopographies have dimensions similar to those of collagen fibers, and act as a local esotactic guidance cue. We find that cells prioritize guidance cues, with electric fields dominating long-term motility by introducing a unidirectional bias in the locations at which actin waves nucleate. That bias competes successfully with the wave guidance provided by the bidirectional nanotopographies.

Cortical waves mediate the cellular response to electric fields

Electrotaxis, the directional migration of cells in a constant electric field, is important in regeneration, development, and wound healing. Electrotaxis has a slower response and a smaller dynamic range than guidance by other cues, suggesting that the mechanism of electrotaxis shares both similarities and differences with chemical-gradient-sensing pathways. We examine a mechanism centered on the excitable system consisting of cortical waves of biochemical signals coupled to cytoskeletal reorganization, which has been implicated in random cell motility. We use electro-fused giant Dictyostelium discoideum cells to decouple waves from cell motion and employ nanotopographic surfaces to limit wave dimensions and lifetimes. We demonstrate that wave propagation in these cells is guided by electric fields. The wave area and lifetime gradually increase in the first 10 min after an electric field is turned on, leading to more abundant and wider protrusions in the cell region nearest the cathode. The wave directions display 'U-turn' behavior upon field reversal, and this switch occurs more quickly on nanotopography. Our results suggest that electric fields guide cells by controlling waves of signal transduction and cytoskeletal activity, which underlie cellular protrusions. Whereas surface receptor occupancy triggers both rapid activation and slower polarization of signaling pathways, electric fields appear to act primarily on polarization, explaining why cells respond to electric fields more slowly than to other guidance cues.

Cell type-specific orientation and migration responses for a microgrooved surface with shallow grooves

BACKGROUND

Directional cell migration due to mechanosensing for in vivo microenvironment, such as microgrooved surfaces, is an essential process in tissue growth and repair in both normal and pathological states. Cell migration responses on the microgrooved surfaces might be reflected by the cell type difference, which is deeply involved in cellular physiological functions. Although the responses are implicated in focal adhesions (FAs) of cells, limited information is available about cell migration behavior on the microgrooved surfaces whose dimensions are comparable with the size of FAs.

OBJECTIVE

In the present study, we investigated the cell orientation and migration behavior of normal vascular smooth muscle cells (VSMCs) and cervical cancer HeLa cells on the microgrooved surface.

METHOD

The surface comprises shallow grooves with 2-μm width and approximately 150-nm depth, which indicates the same order of magnitude as that of the horizontal and vertical size of FAs, respectively. Moreover, VSMCs presenting well-aligned actin stress fibers with mature FAs revealed marked cell elongation and directional migration on the grooves; however, HeLa cells with nonoriented F-actin with smaller FAs did not. Furthermore, atomic force microscopy live cell imaging revealed that the internal force of the actin stress fibers was significantly higher in VSMCs than that in HeLa cells, and the increase or decrease in the cytoskeletal forces improved or diminished the sensing ability for shallow grooves, respectively.

RESULTS

The results strongly indicated that directional cell migration with contact guidance responses should be modulated by cell type-specific cytoskeletal arrangements and intracellular traction forces. The differences in cell type-specific orientation and migration responses can be emphasized on the microgrooves as large as the horizontal and vertical size of FAs.

CONCLUSION

The microgoove structure in the size range of the FA protein complex is a powerful tool to clarify subtle differences in the intracellular force-dependent substrate mechanosensing.

Two-Photon Polymerization: Functionalized Microstructures, Micro-Resonators, and Bio-Scaffolds

The direct laser writing technique based on two-photon polymerization (TPP) has evolved considerably over the past two decades. Its remarkable characteristics, such as 3D capability, sub-diffraction resolution, material flexibility, and gentle processing conditions, have made it suitable for several applications in photonics and biosciences. In this review, we present an overview of the progress of TPP towards the fabrication of functionalized microstructures, whispering gallery mode (WGM) microresonators, and microenvironments for culturing microorganisms. We also describe the key physical-chemical fundamentals underlying the technique, the typical experimental setups, and the different materials employed for TPP.

New perspectives on the roles of nanoscale surface topography in modulating intracellular signaling

The physical properties of biomaterials, such as elasticity, stiffness, and surface nanotopography, are mechanical cues that regulate a broad spectrum of cell behaviors, including migration, differentiation, proliferation, and reprogramming. Among them, nanoscale surface topography, i.e. nanotopography, defines the nanoscale shape and spatial arrangement of surface elements, which directly interact with the cell membranes and stimulate changes in the cell signaling pathways. In biological systems, the effects of nanotopography are often entangled with those of other mechanical and biochemical factors. Precise engineering of 2D nanopatterns and 3D nanostructures with well-defined features has provided a powerful means to study the cellular responses to specific topographic features. In this Review, we discuss efforts in the last three years to understand how nanotopography affects membrane receptor activation, curvature-induced cell signaling, and stem cell differentiation.

Fabrication and friction characteristics of arbitrary biosurfaces

There are many different types of surfaces found in nature which can increase or reduce friction, such as the well-studied frog toe or lotus leaf. However, methods for replicating these surfaces on a large scale for use in industrial applications are needed in order to take advantage of this natural friction engineering. Most replication processes rely on molding that requires an input surface size comparable to the desired output surface. We present a novel approach of replicating large-scale biosurfaces using a laser scanning confocal microscope for surface digitization and 3D two-photon lithography for the fabrication of the digitized surface. Two different natural surfaces (banana skin and daffodil petal) were replicated. An intermediary tiling process was used to cover a target area of arbitrary size independent of the input texture size. The surfaces were coated with a thin layer of ZnO, and the frictional and wettability characteristics of the replicated surfaces were then examined, demonstrating significant friction reduction up to 42% and increased hydrophobicity due to the presence of texture.

Quantifying topography-guided actin dynamics across scales using optical flow

The dynamic rearrangement of the actin cytoskeleton is an essential component of many mechanotransduction and cellular force generation pathways. Here we use periodic surface topographies with feature sizes comparable to those of in vivo collagen fibers to measure and compare actin dynamics for two representative cell types that have markedly different migratory modes and physiological purposes: slowly migrating epithelial MCF10A cells and polarizing, fast-migrating, neutrophil-like HL60 cells. Both cell types exhibit reproducible guidance of actin waves (esotaxis) on these topographies, enabling quantitative comparisons of actin dynamics. We adapt a computer-vision algorithm, optical flow, to measure the directions of actin waves at the submicron scale. Clustering the optical flow into regions that move in similar directions enables micron-scale measurements of actin-wave speed and direction. Although the speed and morphology of actin waves differ between MCF10A and HL60 cells, the underlying actin guidance by nanotopography is similar in both cell types at the micron and submicron scales.

Actin Cytoskeleton and Focal Adhesions Regulate the Biased Migration of Breast Cancer Cells on Nanoscale Asymmetric Sawteeth

Physical guidance from the underlying matrix is a key regulator of cancer invasion and metastasis. We explore the effects of surface topography on the migration phenotype of multiple breast cancer cell lines using aligned nanoscale ridges and asymmetric sawtooth structures. Both benign and metastatic breast cancer cells preferentially move parallel to nanoridges, with enhanced speeds compared to flat surfaces. In contrast, asymmetric sawtooth structures unidirectionally bias the movement of breast cancer cells in a cell-type-dependent manner. Quantitative analysis shows that the level of bias in cell migration increases when cells move with higher speeds or with higher directional persistence. Live-cell imaging studies further reveal that actin polymerization waves are unidirectionally guided by the sawteeth in the same direction as the cell motion. High-resolution fluorescence imaging and scanning electron microscopy studies reveal that two breast cancer cell lines with opposite migrational profiles exhibit profoundly different cell cortical plasticity and focal adhesion patterns. These results suggest that the overall migration response of cancer cells to surface topography is directly related to the underlying cytoskeletal architectures and dynamics, which are regulated by both intrinsic and extrinsic factors.