A novel high sensitivity UPLC-MS/MS method for the evaluation of bisphenol A leaching from dental materials

Level of BPA contamination in resin composites determines BPA release

OBJECTIVES

Resin composites may release bisphenol A (BPA) due to impurities present in the monomers. However, there is a lack of knowledge regarding the leaching characteristics of BPA from resin composites. Therefore, experimental resin composites were prepared with known amounts of BPA. The objective of this study was (1) to determine which amount of BPA initially present in the material leaches out in the short term and, (2) how this release is influenced by the resin composition.

METHODS

BPA (0, 0.001, 0.01, or 0.1 wt%) was added to experimental resin composites containing 60 mol% BisGMA, BisEMA(3), or UDMA, respectively, as base monomer and 40 mol% TEGDMA as diluent monomer. Polymerized samples (n = 5) were immersed at 37 °C for 7 days in 1 mL of water, which was collected and refreshed daily. BPA release was quantified with UPLC-MS/MS after derivatization with pyridine-3-sulfonyl chloride.

RESULTS

Between 0.47 to 0.67 mol% of the originally added BPA eluted from the resin composites after 7 days. Similar elution trends were observed irrespective of the base monomer. Two-way ANOVA showed a significant effect of the base monomer on BPA release, but the differences were small and not consistent.

SIGNIFICANCE

The released amount of BPA was directly proportional to the quantity of BPA present in the resin composite as an impurity. BPA release was mainly diffusion-based, while polymer composition seemed to play a minor role. Our results underscore the importance for manufacturers only to use monomers of the highest purity in dental resin composites to avoid unnecessary BPA exposure in patients.

Validation of a human saliva model for the determination of leachable monomers and other chemicals from dental materials

This study aimed to prove the validity of a mixture of chemicals, including salts, small organic molecules, mucin, and α-amylase, as saliva surrogate ("artificial saliva") for assessing leakage of methacrylate monomers and other constituents from dental materials. To achieve this, we developed and validated a liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for the quantification of 2-hydroxyethyl methacrylate (HEMA), triethylene glycol dimethacrylate (TEGDMA), diurethane dimethacrylate (UDMA), bisphenol A glycerolate dimethacrylate (BisGMA), diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide (TPO), bisphenol A (BPA), and five homologues of ethoxylated bisphenol A dimethacrylate (BisEMA EO2-6) in unstimulated and artificial saliva, and compared their concentrations in the two saliva media following either spiking with a mixture of the compounds or incubation of test specimens of printed biomaterials. Test specimens were immersed in unstimulated/artificial saliva, incubated at 37 °C for 24 h, and saliva aliquots were extracted with methanol and subsequently analyzed by LC-MS/MS. The method was validated with regard to matrix effects, linearity, selectivity, lower limits of quantification (LLOQ), precision, bias and combined measurement uncertainty (u'). The performance characteristics of the method were comparable for unstimulated and artificial saliva samples. The combined u' for individual chemicals at a concentration of 10 × LLOQ were within the range of 5.3-14 % for unstimulated saliva and 6.9-16 % for artificial saliva, except for the BisEMA homologues. Combined u' for the latter were 27-74 % in unstimulated saliva, and 27-79 % in artificial saliva. There was no detectable release of BPA from the test specimens, and the TPO concentrations were mainly below the LLOQ. TEGDMA and UDMA were detected in the highest quantities, and at comparable concentrations in the unstimulated and artificial saliva. For all BisEMA homologues, the release was higher in unstimulated saliva than in artificial saliva. The study showed that the artificial saliva model can be a suitable replacement for native saliva, but might underestimate leakage of more lipophilic methacrylates.

BPA Endocrine Disruptor Detection at the Cutting Edge: FPIA and ELISA Immunoassays

BPA is a chemical commonly used in the production of polymer-based materials that can have detrimental effects on the thyroid gland and impact human reproductive health. Various expensive methods, such as liquid and gas chromatography, have been suggested for detecting BPA. The fluorescence polarization immunoassay (FPIA) is an inexpensive and efficient homogeneous mix-and-read method that allows for high-throughput screening. FPIA offers high specificity and sensitivity and can be carried out in a single phase within a timeframe of 20-30 min. In this study, new tracer molecules were designed that linked the fluorescein fluorophore with and without a spacer to the bisphenol A moiety. To assess the influence of the C6 spacer on the sensitivity of an assay based on the respective antibody, hapten-protein conjugates were synthesized and assessed for performance in an ELISA setup, and this resulted in a highly sensitive assay with a detection limit of 0.05 g/L. The lowest limit of detection was reached by employing the spacer derivate in the FPIA and was 1.0 μg/L, working range from 2 to 155 μg/L. The validation of the methods was conducted using actual samples compared to LC-MS/MS, which served as the reference method. The FPIA and ELISA both demonstrated satisfactory concordance.

Logistic Regression Analysis of LC-MS/MS Data of Monomers Eluted from Aged Dental Composites: A Supervised Machine-Learning Approach

Compound identification by database searching that matches experimental with library mass spectra is commonly used in mass spectrometric (MS) data analysis. Vendor software often outputs scores that represent the quality of each spectral match for the identified compounds. However, software-generated identification results can differ drastically depending on the initial search parameters. Machine learning is applied here to provide a statistical evaluation of software-generated compound identification results from experimental tandem MS data. This task was accomplished using the logistic regression algorithm to assign an identification probability value to each identified compound. Logistic regression is usually used for classification, but here it is used to generate identification probabilities without setting a threshold for classification. Liquid chromatography coupled with quadrupole-time-of-flight tandem MS was used to analyze the organic monomers leached from resin-based dental composites in a simulated oral environment. The collected tandem MS data were processed with vendor software, followed by statistical evaluation of these results using logistic regression. The assigned identification probability to each compound provides more confidence in identification beyond solely by database matching. A total of 21 distinct monomers were identified among all samples, including five intact monomers and chemical degradation products of bisphenol A glycidyl methacrylate (BisGMA), oligomers of bisphenol-A ethoxylate methacrylate (BisEMA), triethylene glycol dimethacrylate (TEGDMA), and urethane dimethacrylate (UDMA). The logistic regression model can be used to evaluate any database-matched liquid chromatography-tandem MS result by training a new model using analytical standards of compounds present in a chosen database and then generating identification probabilities for candidates from unknown data using the new model.

A Pilot Study on Monomer and Bisphenol A (BPA) Release from UDMA-Based and Conventional Indirect Veneering Composites

This study aimed to investigate the release of common monomers from conventional (Dialog Vario, Enamel Plus HFO) and UDMA-based indirect veneering composites (VITA VM LC, GC Gradia). Ten cylindrical samples of each material were prepared (n = 40), immersed in HPLC grade water, and incubated for 24 h in an incubation shaker at 37 °C and 112 rpm. Extraction was performed following ISO 10993-12 and monomers were detected and quantified by HPLC-MS/MS. In all the samples, urethane dimethacrylate (UDMA) and bisphenol A (BPA) were quantifiable. Compared to water blanks, BPA levels were only elevated in the eluates from conventional composites. In all other samples, concentrations were in the range of extraneous BPA and were therefore clinically irrelevant. Low concentrations of Bisphenol A-glycidyl methacrylate (BisGMA) were found in one BPA-free composite and in both conventional materials. Statistical analyses showed that BPA-free materials released significantly less BisGMA and no BPA, while UDMA elution was comparable to elution from conventional materials. All measured concentrations were below reported effective cytotoxic concentrations. Considering these results, the substitution of BPA-derivatives with UDMA might be beneficial since BPA-associated adverse effects are ruled out. Further studies should be enrolled to test the biocompatibility of UDMA on cells of the oral environment.

Analytical Methods for Determination of BPA Released from Dental Resin Composites and Related Materials: A Systematic Review

Knowing the impacts of bisphenol A (BPA) on human health, this systematic review aimed to gather the analytical methods for the quantification of BPA release of BPA in dental materials in in vitro and in vivo (biological fluids) studies. A brief critical discussion of the impacts of BPA on human health and the possible association with BPA in dental materials was also presented. The research was carried out by three independent researchers, (according to PRISMA guidelines) in PUBMED and SCOPUS databases, by searching for specific keywords and articles published between January 2011 and February 2022. Seventeen articles met the eligibility criteria and were included in this systematic review: 10 in vitro and 7 in vivo. In in vitro studies, the highest amounts of BPA released were from flowable to conventional resins, followed by resin-modified glass ionomer. In contrast, the smallest amount was released from "BPA-free" composites and CAD-CAM blocks. Regarding in vivo studies, a higher concentration of BPA were found in saliva than urine or blood. The best analytical method for trace quantifying BPA is LC-MS/MS (Liquid Chromatography with Tandem Mass Spectrometry) due to its selectivity, low quantification limits, and the unequivocal identification. However, further studies are required to develop faster and more sensitive methods, in order to obtain more reliable results.

Monomer Release from Dental Resins: The Current Status on Study Setup, Detection and Quantification for In Vitro Testing

Improvements in mechanical properties and a shift of focus towards esthetic dentistry led to the application of dental resins in various areas of dentistry. However, dental resins are not inert in the oral environment and may release monomers and other substances such as Bisphenol-A (BPA) due to incomplete polymerization and intraoral degradation. Current research shows that various monomers present cytotoxic, genotoxic, proinflammatory, and even mutagenic effects. Of these eluting substances, the elution of BPA in the oral environment is of particular interest due to its role as an endocrine disruptor. For this reason, the release of residual monomers and especially BPA from dental resins has been a cause for public concern. The assessment of patient exposure and potential health risks of dental monomers require a reliable experimental and analytical setup. However, the heterogeneous study design applied in current research hinders biocompatibility testing by impeding comparative analysis of different studies and transfer to the clinical situation. Therefore, this review aims to provide information on each step of a robust experimental and analytical in vitro setup that allows the collection of clinically relevant data and future meta-analytical evaluations.

Meta-analytical analysis on components released from resin-based dental materials

OBJECTIVES

Resin-based materials are applied in every branch of dentistry. Due to their tendency to release substances in the oral environment, doubts have been raised about their actual safety. This review aims to provide a comprehensive analysis of the last decade literature regarding the concentrations of elutable substances released from dental resin-based materials in different type of solvents.

MATERIALS AND METHODS

All the literature published on dental journals between January 2010 and April 2022 was searched using international databases (PubMed, Scopus, Web of Science). Due to strict inclusion criteria, only 23 papers out of 877 were considered eligible. The concentration of eluted substances related to surface and volume of the sample was analyzed, considering data at 24 h as a reference. The total cumulative release was examined as well.

RESULTS

The most eluted substances were HEMA, TEGDMA, and BPA, while the less eluted were Bis-GMA and UDMA. Organic solvents caused significantly higher release of substances than water-based ones. A statistically significant inverse correlation between the release of molecules and their molecular mass was observed. A statistically significant positive correlation between the amount of released molecule and the specimen surface area was detected, as well as a weak positive correlation between the release and the specimen volume.

CONCLUSIONS

Type of solvent, molecular mass of eluates, and specimen surface and volume affect substances release from materials.

CLINICAL RELEVANCE

It could be advisable to rely on materials based on monomers with a reduced elution tendency for clinical procedures.

Bisphenol A Release from Dental Composites and Resin-Modified Glass Ionomers under Two Polymerization Conditions

Bisphenol A (BPA)-based monomers are commonly contained in dental resin-based materials. As BPA is an endocrine disruptor, its long-term release from restorative composites and resin-modified glass ionomers (RM-GICs) under two polymerization conditions was measured in this study. Specimens of two conventional composites containing BPA-based monomers, two “BPA-free” composites, and two RM-GICs were polymerized from one side for 20 s at 1300 mW/cm² or for 5 s at 3000 mW/cm². The amounts of BPA released in artificial saliva and methanol after 1, 4, 9, 16, 35, 65, 130, and 260 days were measured using liquid chromatography–tandem mass spectrometry. The highest amounts of BPA were released from conventional composites, followed by RM-GICs, while the least was released from “BPA-free” composites. Amounts of released BPA were significantly higher in methanol and decreased gradually after the first day. Fast polymerization (5 s at 3000 mW/cm²) resulted in a significantly higher release of BPA after 1 day, but the effect of polymerization conditions was not significant overall. In conclusion, fast polymerization increased the initial release of BPA, but the released amounts were significantly lower than the current tolerable daily intake (4 μg/kg body weight/day) even in methanol, representing the worst-case scenario of BPA release.

Monomer Elution from Three Resin Composites at Two Different Time Interval Using High Performance Liquid Chromatography-An In-Vitro Study

Esthetics, improved colour stability and ease of contour have made photo-activated resin based restorative materials being widely used in routine dental clinical practice. Perhaps improper and inadequate polymerization of resin based composite material might lead to elution of monomer. Thus, the aim of the current study was to quantify the monomer elution from three resin composites. The intended analysis was made using high performance liquid chromatography (HPLC) at two different time periods. Three different materials that were investigated in the current study included Swiss Tech resin composite (Group A), Ceram X (Group B) and Beautifil Injectable composite (Group C). Ten cylindrical samples were fabricated in each study group. In 75% wt of ethanol, the samples were ingressed immediately and stored at room temperature. A 0.5 mL of the samples was assessed at pre-defined time intervals at 24 h and 7th day. Later, assessment of the samples was performed with HPLC and the data was analyzed using statistical test. Bisphenol A-glycidyl methacrylate (Bis-GMA), Triethylene glycol dimethacrylate (TEGDMA), 2-hydroxyethyl methacrylate (HEMA) and Urethane dimethacrylate (UDMA) were quantified in the samples. When analyzing the release monomer, it was found that at the end of 24 h Bis-GMA was eluted more in the injectable resin composite whereas, TEGDMA was eluted from Swiss Tech and Ceram X resin composites. At the end of the 7th day it was evident that Bis-GMA was eluted maximum in all the three resin composites. Thus, monomer release was found to be evident among all three resin composites and it is of utmost important to be assessed in routine clinical practice.

Bisphenol A release from short-term degraded resin-based dental materials

OBJECTIVES

There is still much debate about the release of bisphenol A (BPA) from resin-based dental materials. Therefore, this study aimed to quantify BPA present as an impurity and to evaluate whether their degradation by salivary, bacterial, and chemical challenges could increase its release.

METHODS

BPA was determined in three different amounts (300, 400, and 500 µg) of eight unpolymerized resin-based materials (four composites, one fissure sealant, two adhesives and one root canal sealer). Next, polymerized samples (n = 5) of each material were immersed in 1 mL of whole human pooled saliva collected from adults, Streptococcus mutans (2 × 10⁷ CFU/mL), and acidic (0.1 M HCl), alkaline (0.1 M NaOH), and control media, respectively. The amount of BPA was quantified using an UPLC-MS/MS method including derivatization of BPA by pyridine-3-sulfonyl chloride.

RESULTS

Only the composites contained trace amounts of BPA above the limit of quantification (ranging from 301±32 pg PBA/mg to 1534±62 pg BPA/mg), most likely as impurity from the synthesis of the monomers. The amounts of BPA released from polymerized materials upon salivary and bacterial degradation were too low for accurate quantification, but in water, quantifiable amounts of BPA were released from all materials. In alkaline media, the BPA release from two composites was significantly decreased, while the release from one adhesive was significantly increased, compared to water.

CONCLUSIONS

BPA already present in unpolymerized resin-based materials may account for the release of BPA after polymerization. There was no clear indication that short-term material degradation leads to increased release of BPA.

Release of Bisphenol A from Milled and 3D-Printed Dental Polycarbonate Materials

Polycarbonates are polymers of bisphenol A (BPA), a well-known endocrine disruptor. This study evaluated the release of BPA from polycarbonate crowns that were (1) milled from Temp Premium Flexible (ZPF, Zirkonzahn, Italy) or Tizian Blank Polycarbonate (TBP, Schütz Dental, Germany), or (2) 3D-printed (Makrolon 2805, Covestro, Germany). Commercial prefabricated polycarbonate crowns (3M, USA) and milled poly(methyl methacrylate) (PMMA) crowns (Temp Basic, Zirkonzahn, Italy) were included for comparison. The crowns were stored at 37 °C in artificial saliva (AS) or methanol, which represented the worst-case scenario of BPA release. Extracts were collected after 1 day, 1 week, 1 month and 3 months. BPA concentrations were measured using liquid chromatography-tandem mass spectrometry. The amounts of released BPA were expressed in micrograms per gram of material (μg/g). After 1 day, the highest amounts of BPA were measured from milled polycarbonates, TBP (methanol: 32.2 ± 3.8 μg/g, AS: 7.1 ± 0.9 μg/g) and ZPF (methanol 22.8 ± 7.7 μg/g, AS: 0.3 ± 0.03 μg/g), followed by 3D-printed crowns (methanol: 11.1 ± 2.3 μg/g, AS: 0.1 ± 0.1 μg/g) and prefabricated crowns (methanol: 8.0 ± 1.6 μg/g, AS: 0.07 ± 0.02 μg/g). Between 1 week and 3 months, the average daily release of BPA in methanol and AS decreased below 2 μg/g and 0.6 μg/g, respectively. No BPA was released from PMMA in AS, and the cumulative amount released in methanol was 0.2 ± 0.06 μg/g. In conclusion, polycarbonates could be a relevant source of BPA, but the current tolerable daily intake of BPA (4 μg/kg body weight) should not be exceeded.

Assessing the estrogenic activity of chemicals present in resin based dental composites and in leachates of commercially available composites using the ERα-CALUX bioassay

OBJECTIVE

The biocompatibility of resin based dental composites has not yet been fully characterized even though certain monomers used in these composites are synthesized from Bisphenol A (BPA), a well-known estrogenic endocrine disruptor. As a result, they show structural relationship to BPA and can contain it as an impurity. Therefore, the estrogenic activity of 9 monomers, 2 photoinitiators, one photostabilizer and leachates of 4 commercially available composites was determined.

METHODS

The ERα-CALUX bioassay was used to determine both agonistic and antagonistic estrogenic activities of the pure compounds (BPA, BisDMA, BisGMA, BisEMA(3), BisEMA(6), BisEMA(10), TEGDMA, TCD-DI-HEA, BADGE, UDMA, HMBP, DMPA, CQ) and the leachates of cured composite disks. The leachates of 4 commercially available composites (Solitaire 2, Ceram.x Spectra ST, G-ænial Posterior and Filtek Supreme XTE) in water and 0.1 M NaOH (pH = 13, 'worst-case scenario') were tested for estrogenic activity (pooled leachates from 10 cured composite disks).

RESULTS

Agonistic estrogenic activity was found for the monomer BisDMA, the photostabilizer HMBP and photoinitiator DMPA. All leachates from the 4 tested composites showed significant agonistic estrogenic activity higher than the DMSO control, and the highest activity (potency and efficacy) was found for Solitaire 2, followed by Ceram.x Spectra ST. Furthermore, antagonistic estrogenic activity was found in the leachates from G-ænial Posterior.

SIGNIFICANCE

These results show that significant estrogenic activity was found in all leachates of the cured composite disks, and that this estrogenicity is most likely due to a mixture effect of multiple estrogenic compounds (including BPA, HMBP and DMPA). This indicates that further research into the endocrine activity of all the compounds that are present in these composites (even at low quantities) and their possible mixture effect is warranted to guarantee their safe use.

Long-term elution of bisphenol A from dental composites

OBJECTIVES

BPA release from composites on the short term has been reported in several in-vitro and in-vivo studies. However, it remains unclear whether these materials also leach BPA on the long term. Even though composites may release various (BPA-based) methacrylate monomers up to one year, quantitative data about BPA have not been reported due to the lack of a sensitive method to accurately quantify low levels of BPA. In this context, the aim of the study was to quantify the one-year release of BPA with an optimized analytical method.

METHODS

Composite disks (n = 6, 6 mm diameter and 2 mm height) from four commercial materials (G-ӕnial Posterior, Venus, Ceram.x mono and Filtek Supreme XTE) were immersed in 1 mL of water or ethanol as extraction solvent and stored in the dark at 37 °C. The extraction solvent was renewed weekly for a period of 52 weeks. Samples were derivatized with pyridine-3-sulfonyl chloride before analysis with ultra-pressure liquid chromatography tandem mass spectrometry (UPLC-MS/MS).

RESULTS

Derivatizing BPA increased the sensitivity of the analytical method and allowed accurate quantification of very low levels of BPA (i.e. 0.78 pmol BPA). BPA eluted continuously in ethanol from all four tested composites over a period of one year. BPA elution was clearly higher when ethanol was used as extraction solution. In water, BPA eluted could be detected up to one year, but levels could not be accurately quantified anymore after several weeks.

SIGNIFICANCE

Composites can be considered as a potential long-term source of BPA, and thus should not be neglected when assessing the overall exposure to endocrine disrupting chemicals.

Experimental resin-modified calcium-silicate cement containing N-(2-hydroxyethyl) acrylamide monomer for pulp tissue engineering

AIM

Our study aimed to measure (1) the flexural strength, (2) shear bond strength to dentin, (3) pH, and (4) calcium (Ca) release of a series of innovative resin-modified calcium-silicate pulp-capping cements (Rm-CSCs). Using an ex-vivo human vital tooth-culture model, we additionally assessed (5) their pulp-healing initiation when brought in direct contact with human dental pulp tissue.

METHODOLOGY

Three experimental Rm-CSCs, being referred to 'Exp_HEAA', 'Exp_GDM' and 'Exp_HEAA/GDM', contained either 20 wt% N-(2-hydroxyethyl) acrylamide (HEAA), 20 wt% glycerol dimethacrylate (GDM) or 10 wt% HEAA plus 10 wt% GDM, added to a common base composition consisting of 25 wt% urethane dimethacrylate (UDMA), 10 wt% 4-methacryloxyethyl trimellitate anhydride (4-MET), and 5 wt% N,N'-{[(2-acrylamido-2-[(3-acrylamidopropoxy)methyl] propane-1,3-diyl)bis(oxy)]bis-(propane-1,3-diyl)}diacrylamide (FAM-401). As Ca source and radiopacifier, 37 wt% tricalcium silicate powder (TCS) and 3 wt% zirconium oxide (ZrO 2) were respectively added.

RESULTS

All three experimental Rm-CSCs revealed a significantly higher flexural strength and shear bond strength to dentin (p < 0.05) than the commercial reference Rm-CSC TheraCal LC (Bisco). Exp_HEAA presented with a significantly higher Ca release and pH at 24 h compared with the other Rm-CSCs (p < 0.05). At 1 week, the Ca release and pH of Exp_HEAA and Exp_HEAA/GDM was significantly higher than those of Exp_GDM and TheraCal LC (p < 0.05). Using the ex-vivo human vital tooth culture model, Exp_HEAA revealed pulp-healing initiation capacity as documented by nestin and collagen-I expression.

CONCLUSIONS

Depending on the formulation, the innovative Rm-CSCs performed favorably for primary properties of relevance regarding pulp capping, this more specifically in terms of flexural strength, bond strength to dentin, as well as alkaline pH and Ca release. However, only Exp_HEAA revealed pulp-healing initiation in direct contact with human dental pulp tissue in the ex-vivo human vital tooth-culture model. This promising outcome for Exp_HEAA should be attributed to the combined use of (1) a novel hydrophilic acrylamide monomer, enabling sufficient polymerization while maintaining adequate hydrophilicity, with (2) the functional monomer 4-MET, possessing chemical bonding potential to dentin, and (3) tricalcium silicate powder to achieve an alkaline pH and to release Ca in a sufficient and controlled way.

Bisphenol A as degradation product of monomers used in resin-based dental materials

OBJECTIVE

There is still much debate about the release of bisphenol-A (BPA) from dental materials. Therefore, this study aimed to quantify BPA present as an impurity in both BPA-based and non-BPA-based monomers and to evaluate whether these monomers may degrade to BPA upon salivary, bacterial, and chemical challenges.

METHODS

BPA was determined in three different amounts (1, 2, and 3 μmol) of each monomer (TEGDMA, UDMA, mUDMA, BisGMA, BisEMA-3, -6, -10, -30, BisPMA, EBPADMA urethane, BADGE, and BisDMA). Next, the monomers (3 μmol) were immersed in whole human pooled saliva collected from adults, Streptococcus mutans (2 × 10⁷ CFU/mL), and acidic (0.1 M HCl), alkaline (0.1 M NaOH), and control media. The amount of BPA was quantified using a specific and highly sensitive UPLC-MS/MS method including derivatization of BPA by pyridine-3-sulfonyl chloride.

RESULTS

The monomers BisGMA and BisEMA-3 contained trace amounts (0.0006% and 0.0025%, respectively) of BPA as impurities of their synthesis process. BPA concentrations increased when the monomers BisGMA, BisEMA-3, BisEMA-6, BisEMA-10, BisPMA and BADGE were exposed to saliva and S. mutans, indicating degradation of a small amount of monomer into BPA. In addition, BisPMA and BADGE degraded into BPA under alkaline conditions. The conversion rate of the monomers into BPA ranged between 0.0003% and 0.0025%.

SIGNIFICANCE

Impurities and degradation of BPA-based monomers may account for the release of BPA from resin-based dental materials. Even though the detected amounts of BPA due to monomer impurity were small, manufacturers of dental materials can reduce the BPA content by using only monomers of the highest purity. Considering the overall current trend towards BPA-free materials, it may be recommendable to investigate whether non-BPA based monomers can be used in dental resin-based materials.

Biomarkers, matrices and analytical methods targeting human exposure to chemicals selected for a European human biomonitoring initiative

The major purpose of human biomonitoring is the mapping and assessment of human exposure to chemicals. The European initiative HBM4EU has prioritized seven substance groups and two metals relevant for human exposure: Phthalates and substitutes (1,2-cyclohexane dicarboxylic acid diisononyl ester, DINCH), bisphenols, per- and polyfluoroalkyl substances (PFASs), halogenated and organophosphorous flame retardants (HFRs and OPFRs), polycyclic aromatic hydrocarbons (PAHs), arylamines, cadmium and chromium. As a first step towards comparable European-wide data, the most suitable biomarkers, human matrices and analytical methods for each substance group or metal were selected from the scientific literature, based on a set of selection criteria. The biomarkers included parent compounds of PFASs and HFRs in serum, of bisphenols and arylamines in urine, metabolites of phthalates, DINCH, OPFRs and PAHs in urine as well as metals in blood and urine, with a preference to measure Cr in erythrocytes representing Cr (VI) exposure. High performance liquid chromatography-tandem mass spectrometry (LC-MS/MS) was the method of choice for bisphenols, PFASs, the HFR hexabromocyclododecane (HBCDD), phenolic HFRs as well as the metabolites of phthalates, DINCH, OPFRs and PAHs in urine. Gas chromatographic (GC) methods were selected for the remaining compounds, e.g. GC-low resolution MS with electron capture negative ionization (ECNI) for HFRs. Both GC-MS and LC-MS/MS were suitable for arylamines. New developments towards increased applications of GC-MS/MS may offer alternatives to GC-MS or LC-MS/MS approaches, e.g. for bisphenols. The metals were best determined by inductively coupled plasma (ICP)-MS, with the particular challenge of avoiding interferences in the Cd determination in urine. The evaluation process revealed research needs towards higher sensitivity and non-invasive sampling as well as a need for more stringent quality assurance/quality control applications and assessments.

Dental composites - a low-dose source of bisphenol A?

Dental composite materials often contain monomers with bisphenol A (BPA) structure in their molecules, e.g. bisphenol-A glycidyl dimethacrylate (Bis-GMA). In this study, it was examined whether dental restorative composites could be a low-dose source of BPA or alternative bisphenols, which are known to have endocrine-disrupting effects. Bis-GMA-containing composites Charisma Classic (CC) and Filtek Ultimate Universal Restorative (FU) and "BPA-free" Charisma Diamond (CD) and Admira Fusion (AF) were examined. Specimens (diameter 6 mm, height 2 mm, n=5) were light-cured from one side for 20 s and stored at 37 °C in methanol which was periodically changed over 130 days to determine the kinetics of BPA release. BPA concentrations were measured using a dansyl chloride derivatization method with liquid chromatography - tandem mass spectrometry detection. The amounts of BPA were expressed in nanograms per gram of composite (ng/g). BPA release from Bis-GMA-containing CC and FU was significantly higher compared to "BPA-free" CD and AF. The highest 1-day release was detected with FU (15.4+/-0.8 ng/g), followed by CC (9.1+/-1.1 ng/g), AF (2.1+/-1.3 ng/g), and CD (1.6+/-0.8 ng/g), and the release gradually decreased over the examined period. Detected values were several orders of magnitude below the tolerable daily intake (4 microg/kg body weight/day). Alternative bisphenols were not detected. BPA was released even from "BPA-free" composites, although in significantly lower amounts than from Bis-GMA-containing composites. Despite incubation in methanol, detected amounts of BPA were substantially lower than current limits suggesting that dental composites should not pose a health risk if adequately polymerized.

Validation of a Simple HPLC-UV Method for the Determination of Monomers Released from Dental Resin Composites in Artificial Saliva

Bisphenol-A (BPA), bisphenol A glycerolate dimethacrylate (Bis-GMA), triethylene glycol dimethacrylate (TEGDMA), and urethane dimethacrylate (UDMA) are organic monomers that can be released from dental composites into the oral cavity. Over specific concentrations, they can act as endocrine disruptors or cause toxic effects. The purpose of this work is to develop and validate an analytical method to determine BPA, Bis-GMA, TEGDMA, and UDMA monomers released from synthetic dental resins in artificial saliva. The method was validated before its application to new hybrid ceramic materials used in computer-aided design and computer-aided manufacturing (CAD/CAM) restorations to determine the release of monomers in various time intervals (e.g., 24 h, and 7, 14, 30, and 60 days), both in methanolic solutions, as well as in artificial saliva. Chromatographic analysis was performed isocratically on a Perfect Sil Target ODS-3 analytical column (250 mm × 4.6 mm, 5 µm) with CH3CN/H2O, 58/42% v/v as mobile phase within 23 min. The developed method was validated in terms of selectivity, linearity, accuracy, and precision.

Once Resin Composites and Dental Sealants Release Bisphenol-A, How Might This Affect Our Clinical Management?-A Systematic Review

(1) Background: Bisphenol A (BPA) based dental resins are commonly used in preventive and reparative dentistry. Since some monomers may remain unpolymerized in the application of dental resin, they dissolve in the saliva. (2) Methods: The literature search was carried out in Pubmed, Cochrane and Embase databases. Randomized controlled trials, cohort studies and case-control studies that evaluated BPA levels in human urine, saliva and/or blood were included. (3) Results: The initial search had 5111 results. A total of 20 studies were included in the systematic review. Most studies showed an increase of the levels of bisphenol A 1 h after treatments with composite resins and dental sealants. One week after treatments the levels were decreased. (4) Conclusions: Some clinical precautions should be taken to decrease the release of BPA, namely the use of rubber dam, the immediate polishing of all resins used, or the use of glycerin gel to avoid non-polymerization of the last resin layer, and mouthwash after treatment. Another preventive measure in addition to the above-mentioned is the use of the smallest possible number of restorations or sealants, a maximum of four per appointment. These measures are even more important in children, adolescents and pregnant women.

Association between Heavy Metals, Bisphenol A, Volatile Organic Compounds and Phthalates and Metabolic Syndrome

The incidence of metabolic syndrome (MetS), which causes heart disease and stroke, has increased significantly worldwide. Although many studies have revealed the relationship between heavy metals (cadmium, mercury, and lead), the sum of metabolites of di(2-ethylhexyl) phthalate (DEHP), and MetS, the results remain inconsistent. No study has reported the association between various volatile organic compounds (VOCs) and phthalate metabolites with MetS. This cross-sectional study of a representative sample of adult South Koreans aimed to evaluate the relationship between heavy metals, VOC metabolites, phthalate metabolites, bisphenol A and MetS after adjusting for demographic variables. Data from the Korean National Environmental Health Survey II (2012–2014) (n = 5251) were used in the analysis. Multiple logistic regression analysis was performed for MetS with log-transformed hazardous material quartiles after covariate adjustment. Urine muconic acid (MuA) and mono- (2-ethyl-5-hydroxyhexyl) phthalate (MEHHP) levels were significantly associated with MetS after adjusting for confounders (odds ratio: 1.34 and 1.39, respectively). Urine MuA and MEHHP levels were significantly associated with MetS. Because of the rarity of this study, which investigated the relationship between each VOC and phthalate metabolite with MetS and the strict definition of all indirect measures of MetS components, further research is needed.

A Systematic Review of Exposure to Bisphenol A from Dental Treatment

INTRODUCTION

Dental composite restorations and dental sealants containing bisphenol A glycidyl methacrylate (BisGMA) are commonly used materials in dentistry. Bisphenol A (BPA) is used to manufacture BisGMA and can be a by-product in BisGMA-based dental materials. BPA is an endocrine-disrupting chemical that may affect reproductive, psychological, cognitive, and endocrine-related health. We conducted a systematic review of clinical studies that measured urinary BPA (uBPA) concentrations before and after dental treatment to evaluate the extent to which individuals are exposed to BPA from dental treatment.

METHODS

Eligibility included studies that measured uBPA concentrations before and after dental treatment with any type of resin-based dental material. We searched PubMed, Cochrane, Web of Science, Virtual Health Library, Science Direct, ProQuest, and Clinical Trials with no date or language restrictions to identify published studies. We summarized eligible studies across participant characteristics, amount of treatment, and time of follow-up measures. Because methods of measuring uBPA varied, our primary outcome was the direction and percentage change between baseline and 24 h posttreatment and at later time points as available.

RESULTS

We identified 1,190 abstracts and 7 eligible studies: 4 in children and 3 in adults. In all studies, BPA concentrations increased 24 h after treatment. The 2 studies with the largest sample sizes found statistically significant increases >40% in uBPA concentrations at 24 h posttreatment (both P values <0.01). The 1 study to examine uBPA concentrations beyond 1 mo posttreatment found that concentrations returned to baseline by 14 d after treatment and remained at baseline 6 mo after treatment.

CONCLUSIONS

Our findings suggest that uBPA concentrations increase 24 h after dental treatment. One study showed that uBPA concentrations return to baseline by 14 d. Additional research is needed to determine the magnitude of change from pre- to post-dental treatment and the trajectory of uBPA concentrations posttreatment.

KNOWLEDGE TRANSFER STATEMENT

BPA is an endocrine-disrupting chemical that may have negative human health effects. Our findings suggest that urinary BPA concentrations increase in the short term after dental treatment. The extent to which such an increase may affect the health of patients remains an open question, particularly since there are no established thresholds for safety or harm related to BPA exposure.

Fabrication of magnetic BaFe12O19/Ag3PO4 composites with an in situ photo-Fenton-like reaction for enhancing reactive oxygen species under visible light irradiation

An in situ photo-Fenton-like and magnetic recycle system, BaFe₁₂O₁₉/Ag₃PO₄ has been constructed. BaFe₁₂O₁₉ can catalyze the conversion of H₂O₂ to generate ROSs (˙O₂⁻ and ˙OH radicals) on the surface of Ag₃PO₄.