Influence of the 2-methylimidazole/zinc nitrate hexahydrate molar ratio on the synthesis of zeolitic imidazolate framework-8 crystals at room temperature

Enhanced catalytic performance of Candida rugosa lipase through immobilization on zirconium-2-methylimidazole: A novel biocatalyst approach

Immobilization of enzymes on suitable supports is a critical approach for enhancing enzyme stability, reusability, and overall catalytic efficiency. This study explores the immobilization of Candida rugosa lipase on zirconium-based 2-methylimidazole (ZrMI) nanoparticles, aiming to develop a stable and reusable biocatalyst. The ZrMI was produced via a solvothermal technique and analyzed using various characterization methods. Candida rugose lipase was immobilized using cross-linking agents, achieving an 87 % immobilization efficiency. The immobilized enzyme exhibited significantly enhanced thermal stability, broader pH tolerance, and increased catalytic efficiency compared to free C. rugose lipase. The ZrMI@lipase retained 69 % of its enzymatic activity following a 60-day storage period at 4 °C. Notably, it displayed significant reusability, maintaining 65 % of its original activity after undergoing 15 catalytic cycles. Examination of the kinetics revealed that the immobilized enzyme possessed a heightened substrate affinity (Km of 4.1 mM) and maximal reaction rate (Vmax of 85.7 μmol/ml/min) in comparison to the free enzyme (Km of 5.4 mM and Vmax of 69 μmol/ml/min), indicating enhanced catalytic efficiency. Validation through zeta potential and hydrodynamic size assessments verified the successful binding of the enzyme and the consistent colloidal characteristics. These results suggest that ZrMI is a promising support for C. rugose lipase immobilization, offering improved stability and reusability for various industrial applications. The study highlights the potential of ZrMI@lipase as an efficient and durable biocatalyst, contributing to advancements in enzyme immobilization technology and sustainable industrial processes.

Ultrathin and Self-Supporting MOF/COF-Based Composite Membranes for Hydrogen Separation and Purification from Coke Oven Gas

Coke oven gas (COG) is considered to be one of the most likely raw materials for large-scale H2 production in the near or medium term, with membrane separation technologies standing out from traditional technologies due to their less energy-intensive structures as well as simple operation and occupation. Based on the "MOF-in/on-COF" pore modification strategy, the COF membrane (named the PBD membrane) and ZIF-67 were used as assembly elements to design advanced molecular sieving membranes for hydrogen separation. The composition and microstructure of membranes before and after ZIF-67 loading as well as ZIF-67-in-PBD membranes under different preparation conditions (metal ion concentration, metal-ligand ratio, and reaction time) were investigated by various characterizations to reveal the synthesis regularity and microstructure regulation. Furthermore, H2/CH4 separation performances and separation mechanisms were also analyzed and compared. Finally, a dense, continuous, ultrathin, and self-supporting ZIF-67-in-PBD membrane with a Co2+ concentration of 0.02 mol/L, a metal-ligand ratio of 1:4, and a reaction time of 6 h exhibited the largest specific surface area, micropore proportion, and the best H2/CH4 separation selectivity (α = 33.48), which was significantly higher than the Robeson upper limit and was in a leading position among reported MOF membranes. The separation mechanism was mainly size screening, and adsorption selectivity also contributed a little.

Unified Roadmap for ZIF-8 Nucleation and Growth: Machine Learning Analysis of Synthetic Variables and Their Impact on Particle Size and Morphology

Metal-organic frameworks (MOFs) have settled in the scientific community over the last decades as versatile materials with several applications. Among those, zeolitic imidazolate framework 8 (ZIF-8) is a well-known MOF that has been applied in various and diverse fields, from drug-delivery platforms to microelectronics. However, the complex role played by the reaction parameters in controlling the size and morphology of ZIF-8 particles is still not fully understood. Even further, many individual reports propose different nucleation and growth mechanisms for ZIF-8, thus creating a fragmented view for the behavior of the system. To provide a unified view, we have generated a comprehensive data set of synthetic conditions and their final outputs and applied machine learning techniques to analyze the data. Our approach has enabled us to identify the nucleation and growth mechanisms operating for ZIF-8 in a given sub-space of synthetic variables space (chemical space) and to reveal their impact on important features such as final particle size and morphology. By doing so, we draw connections and establish a hierarchy for the role of each synthetic variable and provide with rule of thumb for attaining control on the final particle size. Our results provide a unified roadmap for the nucleation and growth mechanisms of ZIF-8 in agreement with mainstream reported trends, which can guide the rational design of ZIF-8 particles which ultimately determine their suitability for any given targeted application. Altogether, our work represents a step forward in seeking control of the properties of MOFs through a deeper understanding of the rationale behind the synthesis procedures employed for their synthesis.

3D Pathways Enabling Highly-Efficient Lithium Reservoir for Fast-Charging Batteries

Enhancing the mobility of lithium-ions (Li+) through surface engineering is one of major challenges facing fast-charging lithium-ion batteries (LIBs). In case of demanding charging conditions, the use of a conventional artificial graphite (AG) anode leads to an increase in operating temperature and the formation of lithium dendrites on the anode surface. In this study, a biphasic zeolitic imidazolate framework (ZIF)-AG anode, designed strategically and coated with a mesoporous material, is verified to improve the pathways of Li+ and electrons under a high charging current density. In particular, the graphite surface is treated with a coating of a ZIF-8-derived carbon nanoparticles, which addresses sufficient surface porosity, enabling this material to serve as an electrolyte reservoir and facilitate Li+ intercalation. Moreover, the augmentation in specific surface area proves advantageous in reducing the overpotential for interfacial charge transfer reactions. In practical terms, employing a full-cell with the biphasic ZIF-AG anode results in a shorter charging time and improved cycling performance, demonstrating no evidence of Li plating during 300 cycles under 3.0 C-charging and 1.0 C-discharging. The research endeavors to contribute to the progress of anode materials by enhancing their charging capability, aligning with the increasing requirements of the electric vehicle applications.

The Surface of Colloidal Metal-Organic Framework Nanoparticles Revealed by Vibrational Sum Frequency Scattering Spectroscopy

Solvation shells strongly influence the interfacial chemistry of colloidal systems, from the activity of proteins to the colloidal stability and catalysis of nanoparticles. Despite their fundamental and practical importance, solvation shells have remained largely undetected by spectroscopy. Furthermore, their ability to assemble at complex but realistic interfaces with heterogeneous and rough surfaces remains an open question. Here, we apply vibrational sum frequency scattering spectroscopy (VSFSS), an interface-specific technique, to colloidal nanocrystals with porous metal-organic frameworks (MOFs) as a case study. Due to the porous nature of the solvent-particle boundary, MOF particles challenge conventional models of colloidal and interfacial chemistry. Their multiweek colloidal stability in the absence of conventional surface ligands suggests that stability may arise in part from solvation forces. Spectra of colloidally stable Zn(2-methylimidazolate)2 (ZIF-8) in polar solvents indicate the presence of ordered solvation shells, solvent-metal binding, and spontaneous ordering of organic bridging linkers within the MOF. These findings help explain the unexpected colloidal stability of MOF colloids, while providing a roadmap for applying VSFSS to wide-ranging colloidal nanocrystals in general.

Zeolitic imidazolate frameworks (ZIFs): Advanced nanostructured materials to enhance the functional performance of food packaging materials

Zeolite imidazole framework (ZIF) materials are a class of metallic organic framework (MOF) materials that have several potential applications in the food and other industries. They consist of metal ions or clusters of metal ions coordinated with imidazole-based organic linkers, creating a three-dimensional solid structure with well-defined pores and channels. ZIFs possess several important features, including high porosity, tunable pore sizes, high surface areas, adjustable surface chemistries, and good stabilities. These characteristics make them highly versatile materials that can be used in a variety of applications, including smart and active food packaging. Based on their controllable compositions, dimensions, and pore sizes, the properties of ZIFs can be tailored for a diverse range of applications, including energy storage, sensing, separation, encapsulation, and catalysis. In this article, we focus on recent progress and potential applications of ZIFs in food packaging materials. Previous studies have shown that ZIFs can significantly improve the optical, mechanical, barrier, thermal, sustainability, and preservative properties of packaging materials. Moreover, ZIFs can be used as carriers to encapsulate, protect, and control the release of bioactive agents in packaging materials. ZIFs are capable of selectively adsorbing and releasing molecules based on their size, shape, and surface properties. These unique characteristics make them particularly suitable for smart or active food packaging applications. By selectively removing gases (such as oxygen, carbon dioxide, water, or ethylene) ZIFs can improve the shelf life and quality of packaged foods. In addition, they can be employed to control the growth of spoilage microorganisms and minimize oxidation reactions, thereby enhancing the freshness and extending the shelf life of foods. They may also be used to create sensors capable of detecting and indicating food spoilage. For instance, ZIFs that change color or release specific compounds when spoilage products are present can provide visual or chemical indications of food deterioration. This feature is especially valuable in ensuring the safety and quality of packaged food, as it enables consumers and retailers to easily identify spoiled products. ZIFs can be functionalized using various additives, including antioxidants, antimicrobials, pigments, and flavors, which can improve the preservative and sensory properties of packaged foods. Moreover, ZIF-based packaging materials offer sustainability benefits. Unlike traditional plastic packaging, ZIFs are biodegradable and can easily be disposed of without causing harm to the environment, thereby reducing the adverse effects of plastic waste materials. The application of ZIFs in smart/active food packaging offers exciting possibilities for enhancing the shelf life, quality, and safety of foods. With further research and development, ZIF-based packaging could become a sustainable alternative to plastic-based packaging in the food industry. An important aim of this review article is to stimulate further research on the development and application of ZIFs within food packaging materials.

Graphene and metal-organic framework hybrids for high-performance sensors for lung cancer biomarker detection supported by machine learning augmentation

Conventional diagnostic methods for lung cancer, based on breath analysis using gas chromatography and mass spectrometry, have limitations for fast screening due to their limited availability, operational complexity, and high cost. As potential replacement, among several low-cost and portable methods, chemoresistive sensors for the detection of volatile organic compounds (VOCs) that represent biomarkers of lung cancer were explored as promising solutions, which unfortunately still face challenges. To address the key problems of these sensors, such as low sensitivity, high response time, and poor selectivity, this study presents the design of new chemoresistive sensors based on hybridised porous zeolitic imidazolate (ZIF-8) based metal-organic frameworks (MOFs) and laser-scribed graphene (LSG) structures, inspired by the architecture of the human lung. The sensing performance of the fabricated ZIF-8@LSG hybrid sensors was characterised using four dominant VOC biomarkers, including acetone, ethanol, methanol, and formaldehyde, which are identified as metabolomic signatures in lung cancer patients' exhaled breath. The results using simulated breath samples showed that the sensors exhibited excellent performance for a set of these biomarkers, including fast response (2-3 seconds), a wide detection range (0.8 ppm to 50 ppm), a low detection limit (0.8 ppm), and high selectivity, all obtained at room temperature. Intelligent machine learning (ML) recognition using the multilayer perceptron (MLP)-based classification algorithm was further employed to enhance the capability of these sensors, achieving an exceptional accuracy (approximately 96.5%) for the four targeted VOCs over the tested range (0.8-10 ppm). The developed hybridised nanomaterials, combined with the ML methodology, showcase robust identification of lung cancer biomarkers in simulated breath samples containing multiple biomarkers and a promising solution for their further improvements toward practical applications.

Advances in zeolitic-imidazolate-framework-based catalysts for photo-/electrocatalytic water splitting, CO2 reduction and N2 reduction applications

Harnessing electrical or solar energy for the renewable production of value-added fuels and chemicals through catalytic processes (such as photocatalysis and electrocatalysis) is promising to achieve the goal of carbon neutrality. Owing to the large number of highly accessible active sites, highly porous structure, and charge separation/transfer ability, as well as excellent stability against chemical and electrochemical corrosion, zeolite imidazolate framework (ZIF)-based catalysts have attracted significant attention. Strategic construction of heterojunctions, and alteration of the metal node and the organic ligand of the ZIFs effectively regulate the binding energy of intermediates and the reaction energy barriers that allow tunable catalytic activity and selectivity of a product during reaction. Focusing on the currently existing critical issues of insufficient kinetics for electron transport and selective generation of ideal products, this review starts from the characteristics and physiochemical advantages of ZIFs in catalytic applications, then introduces promising regulatory approaches for advancing the kinetic process in emerging CO2 reduction, water splitting and N2 reduction applications, before proposing perspective modification directions.

An NIR light-driven AgBiS2@ZIF-8 hybrid photocatalyst for rapid bacteria-killing

Bacterial infection is the most common risk factor that causes the failure of implantation surgery. Therefore, the development of biocompatible implants with excellent antibacterial properties is of utmost importance. In this study, NIR light-driven AgBiS2@ZIF-8 hybrid photocatalysts for rapid bacteria-killing were prepared. AgBiS2@ZIF-8 exhibited excellent photocatalytic activity due to the rapid transfer of photoelectrons from AgBiS2 to ZIF-8, resulting in abundant reactive oxygen species (ROS) to kill bacteria. Meanwhile, AgBiS2@ZIF-8 exhibited a noteworthy photothermal effect, which could effectively convert NIR light into heat. Subsequently, the NIR light-driven antibacterial activity of AgBiS2@ZIF-8/Ti against S. aureus and E. coli was studied. The experimental results showed that AgBiS2@ZIF-8 displayed enhanced photodynamic therapy (PDT) and photothermal therapy (PTT) performance. Under irradiation with 808 nm NIR light for 10 min, AgBiS2@ZIF-8/Ti could effectively eliminate 98.55% of S. aureus in vitro, 99.34% of E. coli in vitro and 95% S. aureus in vivo. At the same time, AgBiS2@ZIF-8/Ti had good biocompatibility. Therefore, AgBiS2@ZIF-8/Ti showed potential as an antibacterial material, which provided a strategy to fight polymicrobial infections.

Exploring the Heat of Water Intrusion into a Metal-Organic Framework by Experiment and Simulation

Wetting of a solid by a liquid is relevant for a broad range of natural and technological processes. This process is complex and involves the generation of heat, which is still poorly understood especially in nanoconfined systems. In this article, scanning transitiometry was used to measure and evaluate the pressure-driven heat of intrusion of water into solid ZIF-8 powder within the temperature range of 278.15-343.15 K. The conditions examined included the presence and absence of atmospheric gases, basic pH conditions, solid sample origins, and temperature. Simultaneously with these experiments, molecular dynamics simulations were conducted to elucidate the changing behavior of water as it enters into ZIF-8. The results are rationalized within a temperature-dependent thermodynamic cycle. This cycle describes the temperature-dependent process of ZIF-8 filling, heating, emptying, and cooling with respect to the change of internal energy of the cycle from the calculated change in the specific heat capacity of the system. At 298 K the experimental heat of intrusion per gram of ZIF-8 was found to be -10.8 ± 0.8 J·g-1. It increased by 19.2 J·g-1 with rising temperature to 343 K which is in a reasonable match with molecular dynamic simulations that predicted 16.1 J·g-1 rise. From these combined experiments, the role of confined water in heat of intrusion of ZIF-8 is further clarified.

Synthesis of millimeter-scale ZIF-8 single crystals and their reversible crystal structure changes

Among various metal-organic frameworks (MOFs), the zeolitic imidazole framework (ZIF), constructed by the regular arrangement of 2-methylimidazole and metal ions, has garnered significant attention due to its distinctive crystals and pore structures. Variations in the sizes and shapes of ZIF crystals have been reported by changing the synthesis parameters, such as the molar ratios of organic ligands to metal ions, choice of solvents, and temperatures. Nonetheless, the giant ZIF-8 single crystals beyond the typical range have rarely been reported. Herein, we present the synthesis of millimeter-scale single crystal ZIF-8 using the solvothermal method in N,N-diethylformamide. The resulting 1-mm single crystal is carefully characterized through N2 adsorption-desorption isotherms, scanning electron microscopy, and other analytical techniques. Additionally, single-crystal X-ray diffraction is employed to comprehensively investigate the framework's mobility at various temperatures.

Degradation Kinetic Studies of BSA@ZIF-8 Nanoparticles with Various Zinc Precursors, Metal-to-Ligand Ratios, and pH Conditions

Nanosized zeolitic imidazolate framework particles (ZIF-8 nanoparticles [NPs]) have strong potential as effective carriers for both in vivo and in vitro protein drug delivery. Synthesis of ZIF-8 and stability of protein encapsulation within ZIF-8 are affected by several factors, notably the metal ion source and molar ratio. To systematically investigate these factors, we investigated such effects using BSA as a model test protein to synthesize BSA@ZIF-8 NPs at various metal-to-ligand (M:L) ratios. SEM, FTIR, XRD, and DLS were applied to characterize the morphology and structure of BSA@ZIF-8 NPs and their effects on protein loading capacity. Degradation kinetics and protein release behavior of BSA@ZIF-8 NPs were evaluated at pH 5.0 (to simulate the tumor environment) and pH 7.4 (to mimic the blood environment). Our objective was to define optimal combinations of the high protein loading rate and rapid release under varying pH conditions, and we found that (i) the yield of BSA@ZIF-8 NPs decreased as the M:L ratio increased, but the protein content increased. This highlights the need to strike a balance between cost-effectiveness and practicality when selecting ZIF-8 NPs with different molar ratios for protein-based drug formulation. (ii) BSA@ZIF-8 NPs exhibited cruciate flower-like shapes when synthesized using Zn(NO3)2 as the zinc precursor at M:L ratios of 1:16 or 1:20. In all other cases, the NPs displayed a regular rhombic dodecahedral structure. Notably, the release behavior of the NPs did not differ significantly between these morphologies. (iii) When Zn(OAc)2 was used as the zinc precursor, the synthesized ZIF-8 NPs exhibited a smaller size compared to the Zn(NO3)2-derived ZIF-8 NPs. (iv) The release rate and amount of BSA protein were higher at pH 5.0 compared to pH 7.4. (v) Among the different formulations, BSA@ZIF-8 with an M:L ratio of 1:16 at pH 5.0 was observed to have a shorter time to reach a plateau (0.5 h) and higher protein release, making it suitable for locally rapid administration in a tumor environment. BSA@ZIF-8 prepared from Zn(OAc)2 at an M:L ratio of 1:140 showed the slower release of BSA protein over a 24-h period, indicating its suitability for sustained release delivery. In conclusion, our findings provide a useful basis for the practical application of ZIF-8 NPs in protein-based drug delivery systems.

Synthesis and performance analysis of zeolitic imidazolate frameworks for CO2 sensing applications

In this paper, we investigate the potential use of Zeolitic Imidazolate Frameworks (ZIF-8) as a sensing material for CO2 detection. Three synthesis techniques are considered for the preparation of ZIF-8, namely room temperature, microwave-assisted, and ball milling. The latter is a green and facile alternative for synthesis with its solvent-free, room-temperature operation. In addition, ball milling produces ZIF-8 samples with superior CO2 adsorption and detection characteristics, as concluded from fluorescence measurements. Characterization tests including X-ray diffraction (XRD), Fourier transform infrared (FTIR), Thermogravimetric analysis (TGA), Field emission scanning electron microscopy (FE-SEM) and Energy-dispersive X-ray spectroscopy (EDS) are conducted to inspect the structural morphology, the thermal stability, and elements content of the ZIF-8 samples obtained from the different aforementioned synthesis techniques. The characterization tests revealed the appearance of a new phase of ZIF-8 which is ZIF-L when deploying the ball milling technique with different structure, morphology, response to CO2 exposure and thermal stability when compared to its counterparts. Fluorescence measurements are carried out to evaluate the limit of detection (LOD), selectivity, and recyclability of the different ZIF-8 samples. The LOD of the ZIF-8 sample synthesized based on ball milling synthesis technique is 815.2 ppm, while LODs of the samples obtained from microwave and room temperature-based synthesis techniques are 1780.6 ppm and 723.8 ppm, respectively. This indicates that the room temperature and ball milling produced MOFs have comparable LODs. However, the room temperature procedure requires the use of a harmful solvent. The range of LOD demonstrates the suitable use of ZIF-8 for indoor air quality monitoring and other industrial applications.

Atomically dispersed Zn-Co-N-C catalyst boosting efficient and robust oxygen reduction catalysis in acid via stabilizing Co-N bonds

Transition metal supported N-doped carbon (M-N-C) catalysts for oxygen reduction reaction (ORR) are viewed as the promising candidate to replace Pt-group metal (PGM) for proton exchange membrane fuel cells (PEMFCs). However, the stability of M-N-C is extremely challenging due to the demetalation, H2O2 attack, etc. in the strongly oxidative conditions of PEMFCs. In this study, we demonstrate the universal effect of Zn on promoting the stability of atomically dispersed M-Nx/C (M = Co, Fe, Mn) catalysts and the enhancement mechanism is unveiled for the first time. The best-performing dual-metal-site Zn-Co-N-C catalyst exhibits a high half-wave potential (E 1/2) value of 0.81 V vs. reversible hydrogen electrode (RHE) in acid and outstanding durability with no activity decay after 15,000 accelerated degradation test (ADT) cycles at 60 °C, surpassing most reported Co-based PGM-free catalysts in acid media. For comparison, the Co-N-C in the absence of Zn suffers from a rapid degradation after ADT due to the demetalation and higher H2O2 yield. X-ray adsorption spectroscopy (XAS) and density functional theory (DFT) calculations suggest the more negative formation energy (by 1.2 eV) and increased charge transfer of Zn-Co dual-site structure compared to Co-N-C could strength the Co-N bonds against the demetalation and the optimized d-band center accounts for the improved ORR kinetics.

Soy protein isolate/kappa-carrageenan/cellulose nanofibrils composite film incorporated with zenian essential oil-loaded MOFs for food packaging

Edible films applied in food packaging must possess excellent inhibitory and mechanical properties. Protein-based films exhibit a high capacity for film formation and offer good gas barrier properties. However, they have weak mechanical and water barrier characteristics. The objective of this research was to develop active composite films based on reinforced soy protein isolate (SPI)/Kappa-carrageenan (K) with varying concentrations of bacterial cellulose nanofibrils (BCN). Increasing the BCN concentration improved the morphological, structural, mechanical, water vapor barrier, and moisture content properties. In comparison to the pure SPI film (S), the film with a high BCN concentration demonstrated a significant decrease in WS (22.98 ± 0.78 %), MC (21.72 ± 0.68 %), WVP (1.22 ± 0.14 g mm-1 S-1 Pa-1 10-10), and EAB (57.77 ± 5.25 %) properties. It should be emphasized that there was no significant alteration in the physicomechanical properties of the optimal film (SKB0.75) containing Zenian-loaded metal-organic frameworks (ZM). However, it substantially enhanced the thermal stability of this film, which can be attributed to the strong interfacial interactions between polymer chains and ZM. Furthermore, the ZM films inhibited the growth of pathogenic bacteria and increased the DPPH antioxidant activity. Thus, SKB0.75-ZM2 films can be utilized as practical components in food packaging.

Synthesis of Zeolitic Imidazolate Framework-8 Using Glycerol Carbonate

In this study, we show that glycerol carbonate (GlyC), a bio-based derivative of glycerol, can be used as a suitable green solvent for the synthesis of metal-organic frameworks (MOFs). In particular, a zinc-based zeolitic imidazolate framework-8 (ZIF-8) was synthesized by exploring several different experimental conditions (in terms of temperature, reaction time, and reactants' concentrations) to find that the yield of the reaction and the quality of the products, measured in terms of crystallinity, surface area, and porosity, were in line with those obtained in the most commonly (non-green) used solvents. GlyC was also found to be reusable for several cycles, maintaining the same original quality as a solvent for the synthesis. Finally, some indicators for the assessment of the greenness of a process (E-factor and PMI) revealed a milder environmental impact of GlyC with respect to other solvents.

Mechanism of Water Intrusion into Flexible ZIF-8: Liquid Is Not Vapor

Zeolitic Imidazolate Frameworks (ZIF) find application in storage and dissipation of mechanical energy. Their distinctive properties linked to their (sub)nanometer size and hydrophobicity allow for water intrusion only under high hydrostatic pressure. Here we focus on the popular ZIF-8 material investigating the intrusion mechanism in its nanoscale cages, which is the key to its rational exploitation in target applications. In this work, we used a joint experimental/theoretical approach combining in operando synchrotron experiments during high-pressure intrusion experiments, molecular dynamics simulations, and stochastic models to reveal that water intrusion into ZIF-8 occurs by a cascade filling of connected cages rather than a condensation process as previously assumed. The reported results allowed us to establish structure/function relations in this prototypical microporous material, representing an important step to devise design rules to synthesize porous media.

Antisenescence ZIF-8/Resveratrol Nanoformulation with Potential for Enhancement of Bone Fracture Healing in the Elderly

Accumulation of senescent cells in the elderly impairs bone homeostasis. It is important to alleviate cell senescence and scavenge excessive oxidative stress for enhanced bone fracture healing in elderly patients. In this study, resveratrol (RSV), an antioxidant drug, was encapsulated in a biocompatible zeolitic imidazolate framework-8 (ZIF-8) nanoparticle to protect it from oxidation and improve its bioavailability. Cells responsible for bone healing, including osteoblasts, bone marrow-derived mesenchymal stem cells (BMSCs), macrophages, and endothelial cells, were used to evaluate the regulatory role of the nanoformulation in the alleviation of cellular senescence and promotion of cell functions. It was proved that the nanoformulation sustainably released RSV with well-preserved bioactivity and improved bioavailability. Cell experiments confirmed that ZIF-8/RSV was capable of alleviating the senescence of cells [human osteoblasts (HOBs), BMSCs, H₂O₂-induced senescent vascular endothelial cells (HUVECs)] and scavenging excessive intracellular reactive oxygen species (ROS). Excitingly, the ZIF-8/RSV improved the osteogenic ability of senescent osteoblasts and promoted macrophage M2 polarization. In addition, the ZIF-8/RSV also enhanced the angiogenic function of senescent HUVECs. More importantly, the ZIF-8/RSV nanoformulation outperformed the REV alone, indicating the critical role of encapsulation using ZIF-8. These findings suggest that the ZIF-8/RSV nanoformulation exhibits potential for bone fracture treatment in elderly patients.

Synergistic C-TiO2/ZIF-8 type II heterojunction photocatalyst for enhanced photocatalytic degradation of methylene blue

Zinc imidazolate framework (ZIF-8) and titanium dioxide (TiO₂) have been extensively studied as photocatalysts and have shown remarkable potential. In this study, we report the synthesis of a type II heterojunction photocatalyst based on carbon-doped TiO₂ (C-TiO₂) and ZIF-8 as a potentially improved material for solar light-harvested methylene blue (MB) degradation. Pure ZIF-8 has a wide band gap of 4.9 eV, due to which the application of this material to visible light-assisted photocatalytic performance is a challenging task. Therefore, C-TiO₂ has been chosen as a composite material with ZIF-8 owing to its narrow band gap compared to TiO₂. This enables the free radical-initiated photocatalytic reaction to shift into the visible region instead of the ultraviolet region. To construct the C-TiO₂/ZIF-8 heterostructure, the zinc-based ZIF matrix has been built upon the exterior of C-TiO₂ nanoparticles. UV-Vis diffuse reflectance spectroscopy (UV-Vis-DRS) corroborated the decrease in the band gap of ZIF-8 after the fabrication of C-TiO₂/ZIF-8, while X-ray diffraction (XRD) analysis demonstrated a decrease in average d-spacing and average crystallite size of the synthesized photocatalyst. Raman spectra and X-ray photoelectron spectroscopy (XPS) analysis of the synthesized samples were also performed to further understand their chemical structure and elemental content. Ultraviolet photoelectron spectroscopy (UPS) and high-resolution transmission electron microscopy (HRTEM) analyses were performed to understand the valence band (VB) states and the morphology of C-TiO₂/ZIF-8. The comparison between pure ZIF-8 and C-TiO₂/ZIF-8 in the photocatalytic degradation of MB under visible light has also been drawn. A possible charge-transfer mechanism for the same has also been proposed. It is concluded that the synergistic effect of C-TiO₂ and ZIF-8 in C-TiO₂/ZIF-8 produces an effective material for photocatalytic dye degradation.

Electrodeposition of Ag/ZIF-8-Modified Membrane for Water Remediation

Metal-organic framework (MOF)-based membranes have been widely used in gas and liquid separation due to their porous structures and tunable compositions. Depending on the guest components, heterostructured MOFs can exhibit multiple functions. In the present work, we report a facile and rapid preparation of zeolitic imidazolate framework-8 (ZIF-8) and silver nanoparticle incorporated ZIF-8 (Ag/ZIF-8)-based membranes on stainless-steel mesh (SSM) through a "green" electrodeposition method. The SSM was first coated with a Zn-plated layer which contains mainly zinc hydroxide nitrate (Zn₅(OH)₈(NO₃)₂·2H₂O) with a "leaf-like" morphology, providing anchoring points for the deposition of ZIF-8 and Ag/ZIF-8. It takes only 10 min to prepare a uniform coating of Zn₅(OH)₈(NO₃)₂·2H₂O in aqueous conditions without the use of a strong base; this is by far the most efficient way of making zinc hydroxide nitrate nanocrystals. Following a similar electrodeposition approach, ZIF-8 and Ag/ZIF-8-coated SSM can be prepared within 20 min by applying a small current. The encapsulation of Ag does not alter the chemical composition nor the crystal structure of ZIF-8. The resulting ZIF-8 and Ag/ZIF-8-coated SSM have been tested for their effectiveness for rhodamine B dye removal in a fast vacuum filtration setting. Additionally, growth of E. coli was significantly inhibited after overnight incubation with Ag/ZIF-8-coated SSM. Overall, we demonstrate a fast synthesis procedure to make ZIF-8 and Ag/ZIF-8-coated SSM membranes for organic dye removal with excellent antimicrobial activity.

Hollow CdS-ZnS-ZIF-8 Polyhedron for Visible Light-Induced Cr(VI) Reduction

By loading a small amount of cadmium acetate dihydrate on the zeolitic imidazolate framework-8 (ZIF-8), a hollow CdS-ZnS-ZIF-8 composite was facilely synthesized by rapid solid-phase grinding with thioacetamide. The evolution of the structure, composition, and photoelectrochemical properties was studied by a series of methods. When it was used as a photocatalyst, the hollow CdS-ZnS-ZIF-8 composite demonstrated a highly visible light response as well as a robust ability and reusability for Cr(VI) reduction, which could be ascribed to the hollow structure and ultrasmall CdS nanoparticles. Notably, the presence of ZIF-8-S (ZIF-8 ground with thioacetamide) could also obviously enhance the stability of CdS by promoting the separation of the photogenerated charge during light irradiation.

Metal-Organic Frameworks as bio- and heterogeneous catalyst supports for biodiesel production

As biodiesel (BD)/Fatty Acid Alkyl Esters (FAAE) is derived from vegetable oils and animal fats, it is a cost-effective alternative fuel that could complement diesel. The BD is processed from different catalytic routes of esterification and transesterification through homogeneous (alkaline and acid), heterogeneous and enzymatic catalysis. However, heterogeneous catalysts and biocatalysts play an essential role towards a sustainable alternative to homogeneous catalysts applied in biodiesel production. The main drawback is the supporting material. To overcome this, currently, Metal-Organic Frameworks (MOFs) have gained significant interest as supports for catalysts due to their extremely high surface area and numerous binding sites. This review focuses on the advantages of using various MOFs structures as supports for heterogeneous catalysts and biocatalysts for the eco-friendly biodiesel production process. The characteristics of these materials and their fabrication synthesis are briefly discussed. Moreover, we address in a general way basic items ranging from biodiesel synthesis to applied catalysts, giving great importance to the enzymatic part, mainly to the catalytic mechanism in esterification/transesterification reactions. We provide a summary with recommendations based on the limiting factors.

Plasmonic Nanostructures-Decorated ZIF-8-Derived Nanoporous Carbon for Surface-Enhanced Raman Scattering

Surface-enhanced Raman scattering (SERS) is considered to be a highly sensitive platform for chemical and biological sensing. Recently, owing to their high porosity and large surface area, metal-organic frameworks (MOFs) have attracted considerable attention in sensing applications. Porous carbon nanostructures are promising SERS substrates due to their strong broadband charge-transfer resonance and reproducible fabrication. Furthermore, an extraordinarily large enhancement of the electromagnetic field enables plasmonic nanomaterials to be ideal SERS substrates. Here, we demonstrate the porous Au@Ag nanostructure-decorated MOF-derived nanoporous carbon (NPC) for highly efficient SERS sensing. Specifically, this plasmonic nanomaterial-NPC composite offers high Raman signal enhancement with the ability to detect the model Raman reporter 2-naphthalenethiol (2-NT) at picomolar concentration levels.

Novel Approach for Detecting Vapors of Acids and Bases with Proton-Transfer Luminescent Dyes Encapsulated within Metal-Organic Frameworks

Luminescent metal-organic frameworks (LMOFs) are one of the most promising materials for being implemented as active layers in the fabrication of photonic devices such as luminescent sensors of harmful chemicals. It is highly desirable that these materials undergo quantifiable spectroscopic (absorption or emission) changes in the presence of vapors of those analytes, as in many industrial processes, these toxic compounds are in the gas phase. Although great progresses have been achieved in the field, in most of the examples reported hitherto, the detection of chemicals by LMOFs is attained in solution. Herein, we present a novel approach consisting of the encapsulation of proton transfer dyes (8-hydroxypyrene-1,3,6-trisulfonic acid trisodium salt, HPTS, and 3-hydroxyflavone, 3-HF) within the pores of two distinct MOFs. The trapped proton transfer dyes (PT-dyes) may exist as different structures (enol, anion, or zwitterion), each of these exhibiting unique optical properties. Indeed, our findings reveal that the dyes can be encapsulated as anionic or enol species. Remarkably, the PT-dye@MOF composites exhibit a high luminescence quantum yield (up to 30%), which is sensitive (showing shifting in the emission wavelengths with a concomitant quenching/enhancement of the intensity) in the presence of vapors of an acid (HCl) and a base (triethylamine). These results open a novel avenue for the development of smarter vapoluminescent MOF-based materials.

Fabrication of Carbon Aerogels Derived from Metal-Organic Frameworks/Carbon Nanotubes/Cotton Composites as an Efficient Sorbent for Sustainable Oil–Water Separation

Due to the continuous occurrence of water pollution problems, practical separation methods for oil–water mixtures have attracted more and more attention. To date, different kinds of materials have been developed with good hydrophobic properties and strong separation ability. Carbon aerogels, as a promising ideal adsorbent for dealing with oil-spill accidents, have received extensive attention. In this work, zeolitic imidazolate frameworks (ZIFs), nanoparticles, and carbon nanotubes (CNTs) in the three-dimensional (3D) interconnected network structure of cotton balls (CBs) were successfully prepared by a simple and scalable process. The as-prepared carbonized CBs with carbonized ZIF-8 and CNTs (CZIF-8/CNTs/CCBs) were characterized. The oil–water separation performance of the composite was also measured. The results show that the ZIF-8 clusters intercalated with abundant CNTs are fully loaded into the porous structure of the CBs after the in situ synthesis process. Additionally, ZIF-8/CNTs/CBs was carbonized in nitrogen, leading to the formation of CZIF-8/CNTs/CCBs. The prepared material possesses excellent hydrophobicity with a water contact angle of 152.7°, showing good absorption capacities Q1 in the range of 48 to 84 times its original weight for oil and organic liquids. In addition, CZIF-8/CNTs/CCBs exhibits good recyclability in the absorption–distillation test. In summary, this study proposes a novel and simple method for the preparation of a superhydrophobic material that could have wide application in the separation of oil–water mixtures.

Defect Engineering in Metal-Organic Framework Nanocrystals: Implications for Mechanical Properties and Performance

The growth process of metal-organic framework (MOF) nanocrystals defines their properties and functions. However, defects may be prevalent during the crystallization of even seemingly perfect MOFs, such as zeolitic imidazolate framework-8 (ZIF-8), and yet direct probing of such structural defects has been challenging because of the lack of nanoscale techniques to locally examine individual nanocrystals. Here, we directly study local defects, such as missing linkers or metal vacancies, in ZIF-8 nano- and microcrystals with near-field IR nanospectroscopy combined with density functional theory calculations. We track the chemical changes during crystallization and show that structural defects like zinc cations that are bound to molecules of the reactant gradually disappear with ripening of the crystals, while dangling and missing linker defects prevail. The resulting defect-terminating groups or open-metal sites produce mechanical anisotropy and reduce the Young's modulus, as measured via tip force microscopy with nanoscale resolution and supported by theoretical modeling. However, these structural defects also open the door for defect engineering to tune the performance of ZIF-8 by offering additional adsorption sites for targeted catalytic reactions, chemical sensing, or gas capture.

Biomineralized Cascade Enzyme-Encapsulated ZIF-8 Nanoparticles Combined with Antisense Oligonucleotides for Drug-Resistant Bacteria Treatment

The unrestrained use of antibiotics accelerates the development of drug-resistant bacteria and leads to an increasing threat to human health. Therefore, there is an urgent need to explore novel and effective strategies for the treatment of bacterial infections. Herein, zeolite imidazole framework-8 (ZIF-8) material was utilized to construct biomineralized nanomaterial (GOx&HRP@ZIF-8/ASO) by encapsulating biological cascade enzymes and combining with antisense oligonucleotides (ASOs), which achieved effective and synergistic antidrug-resistant bacteria therapy. Various in vitro assays confirmed that GOx&HRP@ZIF-8/ASO exhibited excellent antibacterial properties against Escherichia coli, Staphylococcus aureus, methicillin-resistant S. aureus (MRSA) during catalysis of glucose (Glu), especially the minimum inhibitory concentration (MIC) against MRSA was only 16 μg/mL. Compared with simple ZIF-8 (32.85%) and ftsZ ASO (58.65%), GOx&HRP@ZIF-8/ASO+Glu exhibited superb biofilm destruction ability, and the bacteria removal efficiency of the MRSA biofilm could be as high as 88.2%, indicating that the reactive oxygen species (ROS) produced by the cascade enzyme reaction imparted the main synergistic antibacterial capability, and simultaneously, ftsZ ASO significantly enhanced the antibacterial effect by inhibiting the expression of the ftsZ gene. In vivo anti-infection treatment experiments revealed that GOx&HRP@ZIF-8/ASO exhibited the best wound repairing performance and excellent biocompatibility in the presence of Glu. These findings suggested that GOx&HRP@ZIF-8/ASO has favorably realized high-efficiency treatment of MRSA infection and filled the gap in the antibacterial application of biological enzymes.

Synthesis and Encapsulation of Ajuga parviflora Extract with Zeolitic Imidazolate Framework-8 and Their Therapeutic Action against G+ and G- Drug-Resistant Bacteria

Infectious diseases caused by bacteria have become a public health issue. Antibiotic therapy for infectious disorders, as well as antibiotic overuse, has resulted in antibiotic-resistant bacterial strains. Zeolitic imidazolate framework-8 (ZIF-8) possesses a wide surface area, high porosity, variable functionality, and potential drug carriers. We have established a clear method for making a nanoscale APE@ZIF-8 nanocomposite agent with outstanding antibacterial activity against methicillin-resistant Staphylococcus aureus (MRSA) and cephalosporin-carbapenem-resistant Escherichia coli (CCREC). We present a unique approach for encapsulating molecules ofAjuga parviflora extract (APE) with ZIF-8. APE@ZIF-8 has a positive charge. By electrostatic contact with the negatively charged bacterial surface of S. aureus and E. coli, APE@ZIF-8 NPs produce reactive oxygen species (ROS) that damage bacterial cell organelles. As a result, the APE@ZIF-8 nanocomposite offers limitless application potential in the treatment of infectious disorders caused by drug-resistant gram-positive and gram-negative bacteria.

High-aspect ratio zeolitic imidazolate framework (ZIF) nanoplates for hydrocarbon separation membranes

Metal-organic frameworks with high aspect ratios have the potential to yield high-performance gas separation membranes. We demonstrate the scalable synthesis of high–aspect ratio zeolitic imidazolate framework (ZIF)–8 nanoplates via a direct template conversion method in which high aspect ratio–layered Zn hydroxide sheets [Zn₅(NO₃)₂(OH)₈] were used as the sacrificial precursor. Successful phase conversion occurs as a result of the collaboration of low template stability and delayed delivery of 2-methylimidazole in weakly interacting solvents, particularly using acetone. When the ZIF-8 nanoplates with an average aspect ratio of 20 were shear aligned in the 6FDA-DAM polymer matrix by bar coating, the separation performance for propylene/propane far surpassed that of the previously reported mixed matrix and polymeric membranes, showing a propylene permeability of 164 Barrer and selectivity of 33.4 at 40 weight % loadings.

Mixed Solvent Method for Improving the Size Uniformity and Cargo-Loading Efficiency of ZIF-8 Nanoparticles

Zeolitic imidazolate framework-8 (ZIF-8) nanoparticles with tunable diameters and a uniform morphology were constructed in dimethyl sulfoxide (DMSO)/H₂O mixed solvents and were further decorated with dextran to improve their stability and biocompatibility. A series of reaction conditions, including the DMSO content in mixed solvents, molar ratio between precursors, growth time, and decoration of dextran, were systematically investigated. Most importantly, it was the union of DMSO and water that achieved the combined merits of both solvothermal and hydrothermal methods, namely, high uniformity and high efficiency, respectively. In addition, numerous properties of these ZIF-8 nanoparticles were subsequently studied, such as the crystal structure, surface properties, and porosity. Furthermore, composite ZIF-8 nanoparticles encapsulating various functional molecules were also successfully prepared in the same DMSO/H₂O mixed solvents, thus laying the foundation for their application as nanocarriers in the biomedical field.

Design and Fabrication of the Evolved Zeolitic Imidazolate Framework-Modified Polylactic Acid Nonwoven Fabric for Efficient Oil/Water Separation

Design of durable and recyclable superhydrophobic materials for oil/water separation is a major concern in the field of wastewater treatment. Functionalization of a biodegradable matrix with controllable grown crystals brings out a new research perspective. In this study, multiscale zeolitic imidazolate frameworks (ZIFs) were grown and decorated on a polylactic acid (PLA) nonwoven fabric (NWF) to construct a superhydrophobic material by an in situ growth method and a spraying process. The stable superhydrophobic layer contains two kinds of ZIF crystals showing microscale flake-like structures and nanoscale particles. The morphology and surface energy of such a hierarchically structured ZIF-modified PLA_NWF is controllable by the adjustment of experimental parameters. The as-prepared PLA hybrid materials exhibit high separation efficiency and recyclability as for water-nitromethane and water-toluene mixtures. Based on the wetting envelopes of the ZIF-modified PLA material, its separation performance for various oil/water mixtures can be preliminarily assessed before the application.

Integrated Microfluidic Synthesis of Aptamer Functionalized Biozeolitic Imidazolate Framework (BioZIF-8) Targeting Lymph Node and Tumor

Targeted delivery of therapeutic molecules using nanomaterials is desired to elicit specific responses toward diseases. Such an integrated synthesis of functional material using a microfluidic approach is a great challenge. Functional metal organic frameworks (MOFs) with unique structural diversity possess a complicated synthesis procedure thereby requiring a modest, straightforward approach to synthesize size-controllable MOFs. Here, we develop an integrated microfluidic chip to synthesize the aptamer-modified biozeolitic imidazolate framework (BioZIF-8) to target the lymph node and tumor. The first stage of the microfluidic chip forms the ZIF-8 encapsulating biomolecules (bovine serum albumin, small interfering ribonucleic acid, and doxorubicin). The second stage modifies the surface of BioZIF-8 with the aptamer. Our approach reduces the overall synthesis time (∼3 mg/10 min against 15 h for the conventional two-step method) and encapsulates a higher number of biomolecules. The microfluidic approach realizes the rapid and fine-tuned synthesis of functional MOFs integrated into one-step.