Comparative analysis of surface coating properties of five hydrophobins from Aspergillus nidulans and Trichoderma reseei

On the Non-Catalytic Role of Lytic Polysaccharide Monooxygenases in Boosting the Action of PETases on PET Polymers

Synthetic polymers are resistant to biological attack, resulting in their long-term accumulation in landfills and in natural aquatic and terrestrial habitats. Lytic polysaccharide monooxygenases (LPMOs) are enzymes which oxidatively cleave the polysaccharide chains in recalcitrant polysaccharides such as cellulose. It has been widely hypothesised that LPMOs could be used to aid in the enzymatic breakdown of synthetic polymers. Herein, through the use of biochemical assays, X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) we show that LPMOs can bind to polyethylene terephthalate (PET), and - in doing so - the hydrophobic surface of PET becomes more hydrophilic such that product release is boosted by subsequent treatment with classical PETases. The boosting effect is however, only observed in reactions when the LPMO and the PETase are added sequentially rather than simultaneously to the PET. Moreover, the same boosting effect is also seen when a catalytically-inactive mutant of LPMO is used, showing that the principal means by which AA9 LPMOs boost the degradation of synthetic polymers is through their role as a "hydrophobin" rather than as an oxygenase. Indeed, in accord with this role of LPMOs, we further show that this effect can be extended to other ostensibly 'non-catalytic' proteins beyond LPMOs, such as bovine serum albumin and lactate dehydrogenase.

Multifunctional hydrophobin-like protein (HFB-NJ1): A versatile solution for wastewater treatment

As wastewater contains a variety of contaminating bacteria and oily residues, there is an urgent need for environmentally safe bactericidal agents and surfactants which can be applied for wastewater treatment. The present study emphasizes on the potential of hydrophobin-like protein (HFB-NJ1) extracted from sporulating mycelia of Aspergillus sp. NJ1 for wastewater treatment. The purified HFB-NJ1, depicted the presence of one single protein band of molecular size approximately 11-12 kDa on silver-stained SDS-PAGE gel. HFB-NJ1 also presented properties such as surface modification of glass and stable emulsification of sunflower oil. HFB-NJ1 depicted exceptional antibacterial activity against bacterial pathogens such as Bacillus subtilis and Pseudomonas aeruginosa at low MIC of 0.5 μg/mL and 0.75 μg/mL respectively. Additionally, HFB-NJ1 depicted enhanced emulsification of various vegetable and petroleum-based oils (E24 > 80%). HFB-NJ1 effectively reduced gold ions, producing nanospheres with a size of 15.33 nm - a recognized antimicrobial agent. This study underscores the multifunctional attributes of HFB-NJ1, highlighting its efficacy in removing pathogenic bacteria, emulsifying organic compounds from wastewater, and demonstrating a reduction ability for nanoparticle synthesis.

Identification and Characterization of a Predominant Hydrophobin in the Edible Mushroom Grifola frondosa

Hydrophobins (HFBs) are a group of small, secreted amphipathic proteins of fungi with multiple physiological functions and potential commercial applications. In this study, HFB genes of the edible mushroom, Grifola frondosa, were systematically identified and characterized, and their transcriptional profiles during fungal development were determined. In total, 19 typical class I HFB genes were discovered and bioinformatically analyzed. Gene expression profile examination showed that Gf.hyd9954 was particularly highly upregulated during primordia formation, suggesting its major role as the predominant HFB in the lifecycle of G. frondosa. The wettability alteration profile and the surface modification ability of recombinant rGf.hyd9954 were greater than for the Grifola HFB HGFII-his. rGf.hyd9954 was also demonstrated to form the typical class I HFB characteristic-rodlet bundles. In addition, rGf.hyd9954 was shown to possess nanoparticle characteristics and emulsification activities. This research sheds light on the regulation of fungal development and its association with the expression of HFB genes.

Only one of three hydrophobins (Hyd1-3) contributes to conidial hydrophobicity and insect pathogenicity of Metarhizium robertsii

Class I/II hydrophobins constitute a family of small amphiphilic proteins that mediate cell hydrophobicity and adhesion to host or substrata and have pleiotropic effects in filamentous fungi. Here we report that only class I Hyd1 is essential for conidial hydrophobicity and insect pathogenicity among three hydrophobins (Hyd1-3) characterized in Metarhizium robertsii, an insect-pathogenic fungus. Aerial conidiation levels of three Δhyd1 mutants were much more reduced in 5-day-old cultures than in 7-day-old cultures, which were wettable (hydrophilic), but restored to a wild-type level in 15-day-old cultures. The Δhyd1 mutants were compromised in conidial quality, including significant decreases in hydrophobicity (58%), adhesion to insect cuticle (36%), insect pathogenicity via normal cuticle infection (37%), UVB resistance (20%), and heat tolerance (10%). In contrast, none of all examined phenotypes were affected in the null mutants of hyd2 and hyd3. Intriguingly, micromorphology and integrity of hydrophobin rodlet bundles on conidial coat were not affected in all mutant and wild-type strains, but the rodlet bundles were disordered in the absence of hyd1, suggesting a link of the disorder to the decreased hydrophobicity. Therefore, Hyd1 mediates the fungal hydrophobicity and plays an important role in conidial quality control and insect-pathogenic lifecycle. Class I Hyd2 and class II Hyd3 seem functionally redundant in M. robertsii.

Thermal degradation and flame spread characteristics of epoxy polymer composites incorporating mycelium

Although bioderived flame retardants are environmentally sustainable and less toxic, their impact on the thermal stability and flammability of polymers remains poorly understood. In this study, we assessed the influence of mycelium on the thermal stability and flame spread characteristics of epoxy through thermogravimetric analysis, Fourier transform infrared spectroscopy, the UL94 flammability test, and scanning electron microscopy. We observed a decrease in the maximum mass loss rate temperature when mycelium was incorporated into epoxy, indicating an earlier onset of thermal degradation. The inclusion of mycelium increased char yields above 418 °C due to mycelium's inherent char-forming ability. However, mycelium did not alter the thermal degradation pathway of epoxy. Furthermore, according to the UL94 test results, the incorporation of mycelium reduced the flame spread rate compared to that of neat epoxy. These findings contribute to our understanding of the interaction between bioderived flame retardants and polymers paving the way for the development of more sustainable fireproofing materials.

Evidence of Small Fungal Cysteine-Rich Proteins Acting as Biosurfactants and Self-Assembling into Large Fibers

Fungi produce surface-active proteins, among which hydrophobins are the most characterized and attractive also for their ability to form functional amyloids. Our most recent findings show that these abilities are shared with other classes of fungal proteins. Indeed, in this paper, we compared the characteristics of a class I hydrophobin (Vmh2 from Pleurotus ostreatus) and an unknown protein (named PAC3), extracted from the marine fungal strain Acremonium sclerotigenum, which does not belong to the same protein family based on its sequence features. They both proved to be good biosurfactants, stabilizing emulsions in several conditions (concentration, pH, and salinity) and decreasing surface tension to a comparable value to that of some synthetic surfactants. After that, we observed for both Vmh2 and PAC3 the formation of giant fibers without the need for harsh conditions or long incubation time, a remarkable ability herein reported for the first time.

Biofilm inspired fabrication of functional bacterial cellulose through ex-situ and in-situ approaches

Bacterial cellulose (BC) has been explored for use in a range of applications including tissue engineering and textiles. BC can be produced from waste streams, but sustainable approaches are needed for functionalisation. To this end, BslA, a B. subtilis biofilm protein was produced recombinantly with and without a cellulose binding module (CBM) and the cell free extract was used to treat BC either ex-situ, through drip coating or in-situ, by incorporating during fermentation. The results showed that ex-situ modified BC increased the hydrophobicity and water contact angle reached 120°. In-situ experiments led to a BC film morphological change and mechanical testing demonstrated that addition of BslA with CBM resulted in a stronger, more elastic material. This study presents a nature inspired approach to functionalise BC using a biofilm hydrophobin, and we demonstrate that recombinant proteins could be effective and sustainable molecules for functionalisation of BC materials.

The Colletotrichum siamense Hydrophobin CsHydr1 Interacts with the Lipid Droplet-Coating Protein CsCap20 and Regulates Lipid Metabolism and Virulence

Previous studies of the lipid droplet-coating protein Cap20 in Colletotrichum show that it plays a key role in appressorium development and virulence. In this study, the hydrophobin CsHydr1, which contains a signal peptide of 19 amino acids and a hydrophobic domain (HYDRO), was shown to interact with CsCap20 in Colletotrichum siamense. The CsHydr1 deletion mutant showed slightly enhanced mycelial growth, small conidia, slow spore germination and appressoria formation, cell wall integrity and virulence. Like CsCAP20, CsHydr1 is also localized on the lipid droplet surface of C. siamense. However, when CsCap20 was absent, some CsHydr1 was observed in other parts. Quantitative lipid determination showed that the absence of either CsHydr1 or CsCap20 reduced the content of lipids in mycelia and conidia, while the effect of CsCap20 was more obvious; these results suggest that an interaction protein CsHydr1 of CsCap20 is localized on the lipid droplet surface and involved in lipid metabolism, which affects appressorium formation and virulence in C. siamense.

Influence of growth rates, microstructural properties and biochemical composition on the thermal stability of mycelia fungi

Mycelium fungal species exhibit fire retardant characteristics. The influence of the growth media on the fungal growth rates, biochemical composition, and microstructural characteristics and their relationship to thermal properties is poorly understood. In this paper, we demonstrate that molasses can support the growth of non-pathogenic Basidiomycota phylum fungal species producing bio-derived materials with potential fire retardation characteristics. Scanning electron microscopy and Fourier transform infrared (FTIR) spectrometry were used to interrogate the microstructural and biochemical properties of the molasses-grown mycelia species. Thermal decomposition of molasses-fed mycelia was evaluated via thermogravimetric analysis interfaced with FTIR for real-time evolved gas analysis. The morphological and microstructural characteristics of the residual char post-thermal exposure were also evaluated. The material characterization enabled the establishment of a relationship between the microstructural, biochemical properties, and thermal properties of molasses-fed mycelia. This paper presents a comprehensive exploration of the mechanisms governing the thermal degradation of three mycelial species grown in molasses. These research findings advance the knowledge of critical parameters controlling fungal growth rates and yields as well as how the microstructural and biochemical properties influence the thermal response of mycelia.

Innovative surface bio-functionalization by fungal hydrophobins and their engineered variants

Research on innovative surface functionalization strategies to develop materials with high added value is particularly challenging since this process is a crucial step in a wide range of fields (i.e., biomedical, biosensing, and food packaging). Up to now, the main applied derivatization methods require hazardous and poorly biocompatible reagents, harsh conditions of temperature and pressure, and are time consuming and cost effective. The discovery of biomolecules able to adhere by non-covalent bonds on several surfaces paves the way for their employment as a replacement of chemical processes. A simple, fast, and environment-friendly method of achieving modification of chemically inert surfaces is offered by hydrophobins, small amphiphilic proteins produced by filamentous fungi. Due to their structural characteristics, they form stable protein layers at interfaces, serving as anchoring points that can strongly bind molecules of interest. In addition, genetic engineering techniques allow the production of hydrophobins fused to a wide spectrum of relevant proteins, providing further benefits in term of time and ease of the process. In fact, it is possible to bio-functionalize materials by simply dip-casting, or by direct deposition, rendering them exploitable, for example, in the development of biomedical and biosensing platforms.

Aspergillus Hydrophobins: Physicochemical Properties, Biochemical Properties, and Functions in Solid Polymer Degradation

Hydrophobins are small amphipathic proteins conserved in filamentous fungi. In this review, the properties and functions of Aspergillus hydrophobins are comprehensively discussed on the basis of recent findings. Multiple Aspergillus hydrophobins have been identified and categorized in conventional class I and two non-conventional classes. Some Aspergillus hydrophobins can be purified in a water phase without organic solvents. Class I hydrophobins of Aspergilli self-assemble to form amphipathic membranes. At the air–liquid interface, RolA of Aspergillus oryzae self-assembles via four stages, and its self-assembled films consist of two layers, a rodlet membrane facing air and rod-like structures facing liquid. The self-assembly depends mainly on hydrophobin conformation and solution pH. Cys4–Cys5 and Cys7–Cys8 loops, disulfide bonds, and conserved Cys residues of RodA-like hydrophobins are necessary for self-assembly at the interface and for adsorption to solid surfaces. AfRodA helps Aspergillus fumigatus to evade recognition by the host immune system. RodA-like hydrophobins recruit cutinases to promote the hydrolysis of aliphatic polyesters. This mechanism appears to be conserved in Aspergillus and other filamentous fungi, and may be beneficial for their growth. Aspergilli produce various small secreted proteins (SSPs) including hydrophobins, hydrophobic surface–binding proteins, and effector proteins. Aspergilli may use a wide variety of SSPs to decompose solid polymers.

Isolation and Characterization of a Novel Hydrophobin, Sa-HFB1, with Antifungal Activity from an Alkaliphilic Fungus, Sodiomyces alkalinus

The adaptations that alkaliphilic microorganisms have developed due to their extreme habitats promote the production of active natural compounds with the potential to control microorganisms, causing infections associated with healthcare. The primary purpose of this study was to isolate and identify a hydrophobin, Sa-HFB1, from an alkaliphilic fungus, Sodiomyces alkalinus. A potential antifungal effect against pathogenic and opportunistic fungi strains was determined. The MICs of Sa-HFB1 against opportunistic and clinical fungi ranged from 1 to 8 µg/mL and confirmed its higher activity against both non- and clinical isolates. The highest level of antifungal activity (MIC 1 µg/mL) was demonstrated for the clinical isolate Cryptococcus neoformans 297 m. The hydrophobin Sa-HFB1 may be partly responsible for the reported antifungal activity of S. alkalinus, and may serve as a potential source of lead compounds, meaning that it can be developed as an antifungal drug candidate.

Identification and characterization of a hydrophobin Vmh3 from Pleurotus ostreatus

Hydrophobins (HPs) are relatively small surface-active proteins of fungal origin. Being an industrially important protein, isolation of new molecules from GRAS (Generally Regarded as Safe) strains like mushrooms is the need of the time. In the present work, hydrophobin Vmh3-1 is isolated, purified, and identified from a culture broth and vegetative mycelia of Pleurotus ostreatus grown in a Potato dextrose broth (PDB) in static culture conditions. Purified proteins from the broth and the cell wall showed bands of 11 kDa and 17 kDa when analyzed on SDS-PAGE. Hydrophobin Vmh3-1 was identified in purified protein samples by the Orbitrap-HR-LC-MS/MS analysis with a maximum of 66% sequence coverage. The amphipathic nature of the protein was revealed by an increase in the water contact angle (WCA) of the hydrophilic surface of glass by 87% as well as a decrease in the WCA of the hydrophobic surface of Teflon by 19%. The emulsification property was tested with food-grade oils and Hexane. A maximum activity (EI ₂₄) of 87.64% was recorded for Sunflower oil. In CD (Circular dichroism) spectra, Vmh3-1 showed the typical spectra of hydrophobin with a dominance of β-sheets (51%) in the secondary structure and a minimum percentage of the α-helix (2%). The protein did not show a self-aggregating property on vigorous shaking making it suitable for numerous industrial applications. The identification of Vmh3-1 with detailed amino acid sequencing and the characterization of the protein to evaluate its potential in surface modifications for various industrial applications is demonstrated herein for the first time.

Class I hydrophobin fusion with cellulose binding domain for its soluble expression and facile purification

Hydrophobins, highly surface-active proteins, have the ability to reverse surface hydrophobicity through self-assembly at the hydrophilic-hydrophobic interfaces. Their unique structure and interfacial activity lead hydrophobins to have potential applications on surface functional modifications. However, class I hydrophobins are prone to self-assemble into highly insoluble amyloid-like rodlets structure. Recombinant hydrophobins could be produced by Escherichia coli but generally as an insoluble inclusion body. To overcome this insoluble expression limitation, cellulose-binding domain (CBD) from Clostridium thermocellum was fused to the N-terminal of class I hydrophobin HGFI to enhance its soluble expression in E. coli. Approximately, 94% of expressed CBD fused HGFI (CBD-HGFI) was found as soluble protein. The fused CBD could also bind specifically onto bacterial cellulose (BC) nanofibrils produced by Komagataeibacter xylinus to facilitate rapid isolation and purification of HGFI from crude extract. Lysostaphin (Lst), known as GlyGly endopeptidase could successfully cleave the flexible linker (GGGGS)₂ between CBD and HGFI to recover HGFI from BC-bound CBD-HGFI. CBD-HGFI purified by immobilized metal-chelated affinity chromatography (IMAC) and Lst cleaved BC-CBD-HGFI still retained interfacial activity of hydrophobin and its effect on accelerating PETase hydrolysis against poly(ethylene terephthalate) (PET) fiber.

The pleiotropic functions of intracellular hydrophobins in aerial hyphae and fungal spores

Higher fungi can rapidly produce large numbers of spores suitable for aerial dispersal. The efficiency of the dispersal and spore resilience to abiotic stresses correlate with their hydrophobicity provided by the unique amphiphilic and superior surface-active proteins-hydrophobins (HFBs)-that self-assemble at hydrophobic/hydrophilic interfaces and thus modulate surface properties. Using the HFB-enriched mold Trichoderma (Hypocreales, Ascomycota) and the HFB-free yeast Pichia pastoris (Saccharomycetales, Ascomycota), we revealed that the rapid release of HFBs by aerial hyphae shortly prior to conidiation is associated with their intracellular accumulation in vacuoles and/or lipid-enriched organelles. The occasional internalization of the latter organelles in vacuoles can provide the hydrophobic/hydrophilic interface for the assembly of HFB layers and thus result in the formation of HFB-enriched vesicles and vacuolar multicisternal structures (VMSs) putatively lined up by HFBs. These HFB-enriched vesicles and VMSs can become fused in large tonoplast-like organelles or move to the periplasm for secretion. The tonoplast-like structures can contribute to the maintenance of turgor pressure in aerial hyphae supporting the erection of sporogenic structures (e.g., conidiophores) and provide intracellular force to squeeze out HFB-enriched vesicles and VMSs from the periplasm through the cell wall. We also show that the secretion of HFBs occurs prior to the conidiation and reveal that the even spore coating of HFBs deposited in the extracellular matrix requires microscopic water droplets that can be either guttated by the hyphae or obtained from the environment. Furthermore, we demonstrate that at least one HFB, HFB4 in T. guizhouense, is produced and secreted by wetted spores. We show that this protein possibly controls spore dormancy and contributes to the water sensing mechanism required for the detection of germination conditions. Thus, intracellular HFBs have a range of pleiotropic functions in aerial hyphae and spores and are essential for fungal development and fitness.

Soluble Expression and Efficient Purification of Recombinant Class I Hydrophobin DewA

Hydrophobins are small proteins (<20 kDa) with an amphipathic tertiary structure that are secreted by various filamentous fungi. Their amphipathic properties provide surfactant-like activity, leading to the formation of robust amphipathic layers at hydrophilic–hydrophobic interfaces, which make them useful for a wide variety of industrial fields spanning protein immobilization to surface functionalization. However, the industrial use of recombinant hydrophobins has been hampered due to low yield from inclusion bodies owing to the complicated process, including an auxiliary refolding step. Herein, we report the soluble expression of a recombinant class I hydrophobin DewA originating from Aspergillus nidulans, and its efficient purification from recombinant Escherichia coli. Soluble expression of the recombinant hydrophobin DewA was achieved by a tagging strategy using a systematically designed expression tag (ramp tag) that was fused to the N-terminus of DewA lacking the innate signal sequence. Highly expressed recombinant hydrophobin DewA in a soluble form was efficiently purified by a modified aqueous two-phase separation technique using isopropyl alcohol. Our approach for expression and purification of the recombinant hydrophobin DewA in E. coli shed light on the industrial production of hydrophobins from prokaryotic hosts.

Genetically Encodable Scaffolds for Optimizing Enzyme Function

Enzyme engineering is an indispensable tool in the field of synthetic biology, where enzymes are challenged to carry out novel or improved functions. Achieving these goals sometimes goes beyond modifying the primary sequence of the enzyme itself. The use of protein or nucleic acid scaffolds to enhance enzyme properties has been reported for applications such as microbial production of chemicals, biosensor development and bioremediation. Key advantages of using these assemblies include optimizing reaction conditions, improving metabolic flux and increasing enzyme stability. This review summarizes recent trends in utilizing genetically encodable scaffolds, developed in line with synthetic biology methodologies, to complement the purposeful deployment of enzymes. Current molecular tools for constructing these synthetic enzyme-scaffold systems are also highlighted.

Surface display of HFBI and DewA hydrophobins on Saccharomyces cerevisiae modifies tolerance to several adverse conditions and biocatalytic performance

Hydrophobins are relatively small proteins produced naturally by filamentous fungi with interesting biotechnological and biomedical applications given their self-assembly capacity, efficient adherence to natural and artificial surfaces, and to introduce modifications on the hydrophobicity/hydrophilicity of surfaces. In this work we demonstrate the efficient expression on the S. cerevisiae cell surface of class II HFBI of Trichoderma reesei and class I DewA of Aspergillus nidulans, a hydrophobin not previously exposed, using the Yeast Surface Display a-agglutinin (Aga1-Aga2) system. We show that the resulting modifications affect surface properties, and also yeast cells' resistance to several adverse conditions. The fact that viability of the engineered strains increases under heat and osmotic stress is particularly interesting. Besides, improved biocatalytic activity toward the reduction of ketone 1-phenoxypropan-2-one takes place in the reactions carried out at both 30 °C and 40 °C, within a concentration range between 0.65 and 2.5 mg/mL. These results suggest interesting potential applications for hydrophobin-exposing yeasts. KEY POINTS : • Class I hydrophobin DewA can be efficiently exposed on S. cerevisiae cell surfaces. • Yeast exposure of HFBI and DewA increases osmotic and heat resistance. • Engineered strains show modified biocatalytic behavior.

The stuA gene controls development, adaptation, stress tolerance, and virulence of the dermatophyte Trichophyton rubrum

The APSES family, comprising of the transcriptional regulators Asm1p, Phd1p, Sok2p, Efg1p, and StuA, is found exclusively in fungi and has been reported to control several cellular processes in these organisms. However, its function in dermatophytes has not yet been completely understood. Here, we generated two null mutant strains by deleting the stuA gene in the dermatophyte Trichophyton rubrum, the most common clinical isolate obtained from human skin and nail mycoses. The functional characterization of the knocked-out strains revealed the involvement of stuA in germination, morphogenesis of conidia and hyphae, pigmentation, stress responses, and virulence. Although the mutant strains could grow under several nutritional conditions, growth on the keratin medium, human nails, and skin was impaired. The co-culture of stuA mutants with human keratinocytes revealed enhanced development. Moreover, a stuA mutant grown on the keratin substrate showed a marked decrease in the transcript numbers of the hydrophobin encoding gene (hypA), suggesting the involvement of stuA in the molecular mechanisms underlying mechanosensing during the fungi-host interaction. In addition, bioinformatics analyses revealed the potential involvement of StuA in different biological processes such as oxidation-reduction, phosphorylation, proteolysis, transcription/translation regulation, and carbohydrate metabolism. Cumulatively, the present study suggested that StuA is a crosstalk mediator of many pathways and is an integral component of the infection process, implying that it could be a potential target for antifungal therapy.

Fungal hydrophobins render stones impermeable for water but keep them permeable for vapor

The conservation of architectural heritage is a big challenge in times with increasing air pollution with aggressive gases. A second major threat to buildings is the combination of water and air contaminants which may be used by microorganisms for their metabolism. Hence, myriads of different bacteria and fungi populate stone surfaces and penetrate into the fine pores and cracks. Whereas epoxid-based paintings (or other paintings) may protect the coated surfaces from water and aggressive gases, these chemicals seal the stone surface and prevent also the evaporation of vapor from the inside of the buildings. Here, we tested a natural, fungal protein-based coating method. Fungi use small, amphiphilic proteins to turn their surfaces hydrophobic. We found that Aspergillus nidulans hydrophobin DewA and Trichoderma reesei HFBI confer hydrophobicity to stones but keep their pores open. The effect resembles “Gore-tex” fabric material.

Effect of gene copy number and chaperone coexpression on recombinant hydrophobin HFBI biosurfactant production in Pichia pastoris

Hydrophobins are small highly surface-active fungal proteins with potential as biosurfactants in a wide array of applications. However, practical implementation of hydrophobins at large scale has been hindered by low recombinant yields. In this study, the effects of increasing hydrophobin gene copy number and overexpressing endoplasmic reticulum resident chaperone proteins Kar2p, Pdi1p, and Ero1p were explored as a means to enhance recombinant yields of the class II hydrophobin HFBI in the eukaryotic expression host Pichia pastoris. One-, 2-, and 3-copy-HFBI strains were attained using an in vitro multimer ligation approach, with strains displaying copy number stability following subsequent transformations as measured by quantitative polymerase chain reaction. Increasing HFBI copy number alone had no effect on increasing HFBI secretion, but increasing copy number in concert with chaperone overexpression synergistically increased HFBI secretion. Overexpression of PDI1 or ERO1 caused insignificant changes in HFBI secretion in 1- and 2-copy strains, but a statistically significant HFBI secretion increase in 3-copy strain. KAR2 overexpression consistently resulted in enhanced HFBI secretion in all copy number strains, with 3-copy-HFBI secreting 22±1.6 fold more than the 1-copy-HFBI/no chaperone strain. The highest increase was seen in 3-copy-HFBI/Ero1p overexpressing strain with 30±4.0 fold increase in HFBI secretion over 1-copy-HFBI/no chaperone strain. This corresponded to an expression level of approximately 330 mg/L HFBI in the 5 ml small-scale format used in this study.

CARS spectroscopy of Aspergillus nidulans spores

Coherent Anti-Stokes Raman Spectroscopy (CARS) is performed on single spores (conidia) of the fungus Aspergillus nidulans in order to establish a baseline measurement for fungal spores. Chemical maps of single spores are generated and spectral differentiation between the cell wall and the cytoplasm is achieved. Principal Component Analysis of the measured spectra is then completed as a means to quantify spore heterogeneity. Applications range from the quick and accurate diagnosis of public health concerns to real-time agricultural and environmental sensing of fungal symbionts and pathogens.

Hydrophobins: multifunctional biosurfactants for interface engineering

Hydrophobins are highly surface-active proteins that have versatile potential as agents for interface engineering. Due to the large and growing number of unique hydrophobin sequences identified, there is growing potential to engineer variants for particular applications using protein engineering and other approaches. Recent applications and advancements in hydrophobin technologies and production strategies are reviewed. The application space of hydrophobins is large and growing, including hydrophobic drug solubilization and delivery, protein purification tags, tools for protein and cell immobilization, antimicrobial coatings, biosensors, biomineralization templates and emulsifying agents. While there is significant promise for their use in a wide range of applications, developing new production strategies is a key need to improve on low recombinant yields to enable their use in broader applications; further optimization of expression systems and yields remains a challenge in order to use designed hydrophobin in commercial applications.