A power-free, parallel loading microfluidic reactor array for biochemical screening

A Miniaturized Archimedean Screw Pump for High-Viscosity Fluid Pumping in Microfluidics

Microfluidic devices have revolutionized the field of lab-on-a-chip by enabling precise manipulation of small fluid volumes for various biomedical applications. However, most existing microfluidic pumps struggle to handle high-viscosity fluids, limiting their applicability in certain areas that involve bioanalysis and on-chip sample processing. In this paper, the design and fabrication of a miniaturized Archimedean screw pump for pumping high-viscosity fluids within microfluidic channels are presented. The pump was 3D-printed and operated vertically, allowing for continuous and directional fluid pumping. The pump's capabilities were demonstrated by successfully pumping polyethylene glycol (PEG) solutions that are over 100 times more viscous than water using a basic mini-DC motor. Efficient fluid manipulation at low voltages was achieved by the pump, making it suitable for point-of-care and field applications. The flow rates of water were characterized, and the effect of different screw pitch lengths on the flow rate was investigated. Additionally, the pump's capacity for pumping high-viscosity fluids was demonstrated by testing it with PEG solutions of increasing viscosity. The microfluidic pump's simple fabrication and easy operation position it as a promising candidate for lab-on-a-chip applications involving high-viscosity fluids.

An Integrated Centrifugal Degassed PDMS-Based Microfluidic Device for Serial Dilution

We propose an integrated serial dilution generator utilizing centrifugal force with a degassed polydimethylsiloxane (PDMS) microfluidic device. Using gas-soluble PDMS as a centrifugal microfluidic device material, the sample can be dragged in any arbitrary direction using vacuum-driven force, as opposed to in a single direction, without adding further actuation components. The vacuum-driven force allows the device to avoid the formation of air bubbles and exhibit high tolerance in the surface condition. The device was then used for sample metering and sample transferring. In addition, centrifugal force was used for sample loading and sample mixing. In this study, a series of ten-fold serial dilutions ranging from 100 to 10-4 with about 8 μL in each chamber was achieved, while the serial dilution ratio and chamber volume could easily be altered by changing the geometrical designs of the device. As a proof of concept of our hybrid approach with the centrifugal and vacuum-driven forces, ten-fold serial dilutions of a cDNA (complementary DNA) sample were prepared using the device. Then, the diluted samples were collected by fine needles and subject to a quantitative polymerase chain reaction (qPCR), and the results were found to be in good agreement with those for samples prepared by manual pipetting.

Nanoliter-scale liquid metering and droplet generation based on a capillary array for high throughput screening

Herein, we developed a simple approach for quantitative metering of nanoliter-scale liquids in parallel based on a capillary array and applied it in high throughput screening protein crystallization conditions. The quantitative metering of liquids was achieved by using capillary force to spontaneously introduce the liquids into short capillaries with fixed length and inner diameter, and the nanoliter-scale droplets were generated by using a pneumatic pump to deliver liquids out from the capillary channels. We adopted measures of sharpening the capillary tips and performing a hydrophobic treatment on the tip surface to significantly reduce the capillary residues during the liquid aspirating and dispensing process, and thus improved the precision to 0.2%-3.5% relative standard deviations (RSD, n = 3) in metering droplets in the range of 280 pL-90 nL. We evaluated the performance of the system in metering liquids of different surface tensions and viscosity. On the basis of this approach, we built a capillary array system with 12 capillaries, by which parallel generation of 12 nL droplets of 12 samples could be achieved in 40 s with a relative standard deviation (RSD) of 1.2%. We applied the system in the screening of lysozyme crystallization conditions of 48 precipitants with 7.5 nL precipitant and 7.5 nL protein solutions in each crystallization droplet reactor, to demonstrate its potentials in large-scale high-throughput screening and analysis with different samples.

A simplified PDMS microfluidic device with a built-in suction actuator for rapid production of monodisperse water-in-oil droplets

We previously established an automatic droplet-creation technique that only required air evacuation of a PDMS microfluidic device prior to use. Although the rate of droplet production with this technique was originally slow (∼10 droplets per second), this was greatly improved (∼470 droplets per second) in our recent study by remodeling the original device configuration. This improvement was realized by the addition of a degassed PDMS layer with a large surface area-to-volume ratio that served as a powerful vacuum generator. However, the incorporation of the additional PDMS layer (which was separate from the microfluidic PDMS layer itself) into the device required reversible bonding of five different layers. In the current study, we aimed to simplify the device architecture by reducing the number of constituent layers for enhancing usability of this microfluidic droplet generator while retaining its rapid production rate. The new device consisted of three layers. This comprised a degassed PDMS slab with microfluidic channels on one surface and tens of thousands of vacuum-generating micropillars on the other surface, which was simply sandwiched by PMMA layers. Despite its simplified configuration, this new device created monodisperse droplets at an even faster rate (>1000 droplets per second).

High-throughput screening of organic reactions in microdroplets using desorption electrospray ionization mass spectrometry (DESI-MS): hardware and software implementation

This study describes an automated system used for high throughput screening of reaction conditions based on accelerated reactions occurring in small volumes of reagents. Reaction mixtures are prepared in array format using a fluid handling robot and spotted on a flat polytetrafluoroethylene plate at densities up to 6144 per plate. The reaction and analysis steps are performed simultaneously using desorption electrospray ionization (DESI) to release microdroplets containing the reaction mixture from the plate for reaction prior to arrival at a mass spectrometer. Analysis rates are up to 1 reaction mixture per second and data are recorded in real time using an ion trap mass spectrometer. Beacon compounds are used to triangulate position on the plate and this allows tandem mass spectrometry (MS/MS) to be performed on confirm products of interest. Custom software allows the user to control the system. It is also used to receive data from the DESI mass spectrometer to screen the spectra for compounds of interest, to perform MS/MS and to save data. This custom software also communicates with the software controlling the fluid handling robot (Biomek i7) as well as the Beckman software used to prepare reaction mixtures and also the software that controls the solvent used as the DESI spray. Data were recorded for N-alkylation, N-acylation and N-sulfonylation reactions in three 8 hour experiments on successive days to establish the ruggedness and repeatability of the system. Repeatability is high (94-97%) over this period with false negative 6% (depending on noise threshold chosen). Plates containing 384 reaction mixtures are analyzed in 7 min by moving the DESI sprayer in steps under the sprayer instead of continuously.

Towards practical sample preparation in point-of-care testing: user-friendly microfluidic devices

Microfluidic technologies offer a number of advantages for sample preparation in point-of-care testing (POCT), but the requirement for complicated external pumping systems limits their wide use. To facilitate sample preparation in POCT, various methods have been developed to operate microfluidic devices without complicated external pumping systems. In this review, we introduce an overview of user-friendly microfluidic devices for practical sample preparation in POCT, including self- and hand-operated microfluidic devices. Self-operated microfluidic devices exploit capillary force, vacuum-driven pressure, or gas-generating chemical reactions to apply pressure into microchannels, and hand-operated microfluidic devices utilize human power sources using simple equipment, including a syringe, pipette, or simply by using finger actuation. Furthermore, this review provides future perspectives to realize user-friendly integrated microfluidic circuits for wider applications with the integration of simple microfluidic valves.

Advances in passively driven microfluidics and lab-on-chip devices: a comprehensive literature review and patent analysis

The development of passively driven microfluidic labs on chips has been increasing over the years. In the passive approach, the microfluids are usually driven and operated without any external actuators, fields, or power sources. Passive microfluidic techniques adopt osmosis, capillary action, surface tension, pressure, gravity-driven flow, hydrostatic flow, and vacuums to achieve fluid flow. There is a great need to explore labs on chips that are rapid, compact, portable, and easy to use. The evolution of these techniques is essential to meet current needs. Researchers have highlighted the vast potential in the field that needs to be explored to develop rapid passive labs on chips to suit market/researcher demands. A comprehensive review, along with patent analysis, is presented here, listing the latest advances in passive microfluidic techniques, along with the related mechanisms and applications.