Photocatalytic Degradation of Bisphenol-A using N, Co Codoped TiO2 Catalyst under Solar Light

Bisphenol H exposure disrupts Leydig cell function in adult rats via oxidative stress-mediated m6A modifications: Implications for reproductive toxicity

Bisphenol H (BPH) has emerged as a potential alternative to bisphenol A (BPA), which has been curtailed for use due to concerns over its reproductive and endocrine toxicity. This study investigates whether BPH exerts antiandrogenic effects by impairing Leydig cell function, a critical component in testosterone production. We administered orally BPH to adult male rats at doses of 0, 1, 10, and 100 mg/kg/day for 7 days. Notably, BPH treatment resulted in a dose-dependent reduction in testicular testosterone levels, with significant decreases observed at ≥ 1 mg/kg/day. Additionally, BPH affected the expression of key genes involved in steroidogenesis and cholesterol metabolism, including Nr5a1, Nr3c4, Lhcgr, Scarb1, and Star, at higher doses (10 and/or 100 mg/kg/day). The study also revealed alterations in antioxidant gene expression (Sod2 and Cat) and modulation of m6A-related genes (Ythdf1-3 and Foxo3) and their proteins. Through MeRIP-qPCR analysis, we identified increased m6A modifications in Scarb1 and Star genes following BPH exposure. In vitro experiments with primary Leydig cells confirmed that BPH enhanced oxidative stress and diminished testosterone production, which were partially mitigated by antioxidant vitamin E supplementation and Ythdf3 knockdown. Meanwhile, simultaneous administration of BPH and vitamin E to primary Leydig cells partially counteracted BPH-induced alterations in the Ythdf3 expression. Our findings underscore a novel mechanism by which BPH disrupts Leydig cell function through the oxidative stress-m6A modification-autophagy pathway, raising concerns about its potential reproductive toxicity.

Poly Meta-Aminophenol (PmAP) as a Solid-State Electron Mediator in the Z-Scheme, Ag3PO4/CoFe2O4 Heterojunction: Mineralization of Highly Concentrated Bisphenol-A and Reactive Dyes Water Pollutants

This study demonstrated the effectiveness of poly meta-aminophenol (PmAP) as a solid electron mediator in the Z-scheme photocatalytic system for organic pollutants (viz. bisphenol-A and reactive dyes) mineralization and also illustrated how PmAP transported the photogenerated electrons from an O2-emitting photocatalyst (Ag3PO4) to a H2-emitting photocatalyst (CoFe2O4) enabling enhanced photocatalytic activity under visible light irradiation. The PmAP/Ag3PO4-CoFe2O4 (PAC-10), was prepared by a two-step process and characterized by various analytical methods to assess the impact of PmAP on optical, photocatalytic, and electrochemical characteristics of the CoFe2O4 (CFO)/Ag3PO4 composite. The morphological investigation revealed that the PmAP sheet was nicely decorated with evenly distributed Ag3PO4 and CoFe2O4 particles. The M-S plot and impedance analyses were used to assess the electrochemical capabilities of the catalyst. Z-scheme charge transfer pathways were well supported by the radical trapping experiment and HRTEM analysis of Pt photodeposited PAC-10 photocatalysts during the photoreaction. Because of its magnetic nature and ease of synthesis, the PAC-10 offers an easily recyclable Z-scheme photocatalytic system that has the potential for purifying wastewater with high concentrations (up to 100 mg/L) of organic pollutants within 30 min of visible light exposition.

Tungsten-based nanocatalysts with different structures for visible light responsive photocatalytic degradation of bisphenol A

Environmental pollution, such as water contamination, is a critical issue that must be absolutely addressed. Here, three different morphologies of tungsten-based photocatalysts (WO3 nanorods, WO3/WS2 nanobricks, WO3/WS2 nanorods) are made using a simple hydrothermal method by changing the solvents (H2O, DMF, aqueous HCl solution). The as-prepared nanocatalysts have excellent thermal stability, large porosity, and high hydrophilicity. The results show all materials have good photocatalytic activity in aqueous media, with WO3/WS2 nanorods (NRs) having the best activity in the photodegradation of bisphenol A (BPA) under visible-light irradiation. This may originate from increased migration of charge carriers and effective prevention of electron‒hole recombination in WO3/WS2 NRs, whereby this photocatalyst is able to generate more reactive •OH and •O2- species, leading to greater photocatalytic activity. About 99.6% of BPA is photodegraded within 60 min when using 1.5 g/L WO3/WS2 NRs and 5.0 mg/L BPA at pH 7.0. Additionally, the optimal conditions (pH, catalyst dosage, initial BPA concentration) for WO3/WS2 NRs are also elaborately investigated. These rod-like heterostructures are expressed as potential catalysts with excellent photostability, efficient reusability, and highly active effectivity in different types of water. In particular, the removal efficiency of BPA by WO3/WS2 NRs reduces by only 1.5% after five recycling runs and even reaches 89.1% in contaminated lake water. This study provides promising insights for the nearly complete removal of BPA from wastewater or different water resources, which is advantageous to various applications in environmental remediation.

Computational explorations of the interaction between laccase and bisphenol A: influence of surfactant and different organic solvents

Bisphenol A (BPA), as an environmental endocrine disruptor can cause damage to the reproductive, nervous and immune systems. Laccase can be used to degrade BPA. However, laccase is easily deactivated, especially in organic solvents, but the specific details are not clear. Molecular dynamics simulations were used to investigate the reasons for changes in laccase activity in acetonitrile (ACN) and dimethyl formamide (DMF) solutions. In addition, the effects of ACN and DMF on the activity of laccase and surfactant rhamnolipid (RL) on the degradation of BPA by laccase were investigated. Results showed that addition of ACN changed the structure of the laccase, not only decreasing the van der Waals interaction that promoted the binding of laccase with BPA, but also increasing the polar solvation free energy that hindered the binding of laccase with BPA, so it weakened the laccase activity. DMF greatly enhanced the van der Waals interaction between laccase and BPA, and played a positive role in their binding. The addition of surfactant RL alleviated the effect of organic solvent on the activity of laccase by changing the polar solvation energy. The mechanism of surfactant RL affecting laccase activity in ACN and DMF is described, providing support for understanding the effect of organic solvents on laccase.

MWCNTs Decorated with TiO2 as Highly Performing Filler in the Preparation of Nanocomposite Membranes for Scalable Photocatalytic Degradation of Bisphenol A in Water

Bisphenol A (BPA), an endocrine-disrupting compound with estrogenic behavior, is of great concern within the scientific community due to its high production levels and increasing concentration in various surface aquifers. While several materials exhibit excellent capacity for the photocatalytic degradation of BPA, their powdered nature and poor chemical stability render them unsuitable for practical application in large-scale water decontamination. In this study, a new class of nanocomposite membranes based on sulfonated polyethersulfone (sPES) and multiwalled carbon nanotubes decorated with TiO2 nanoparticles (MWCNTs-TiO2) were investigated as efficient and scalable photocatalysts for the photodegradation of BPA in aqueous solutions. The MWCNTs-TiO2 hybrid material was prepared through a facile and inexpensive hydrothermal method and extensively characterized by XRD, Raman, FTIR, BET, and TGA. Meanwhile, nanocomposite membranes at different filler loadings were prepared by a simple casting procedure. Swelling tests and PFG NMR analyses provided insights into the impact of filler introduction on membrane hydrophilicity and water molecular dynamics, whereas the effectiveness of the various photocatalysts in BPA removal was monitored using HPLC. Among the different MWCNTs-TiO2 content nanocomposites, the one at 10 wt% loading (sP-MT10) showed the best photoactivity. Under UV irradiation at 254 nm and 365 nm for 240 min, photocatalytic oxidation of 5 mg/L bisphenol A by sP-MT10 resulted in 91% and 82% degradation, respectively. Both the effect of BPA concentration and the membrane regenerability were evaluated, revealing that the sP-MT10 maintained its maximum BPA removal capability over more than 10 cycles. Our findings indicate that sP-MT nanocomposite membranes are versatile, scalable, efficient, and highly reusable photocatalysts for the degradation of BPA, as well as potentially for other endocrine disruptors.

Comparison of effects of multiple oxidants with an ultrasonic system under unified system conditions for bisphenol A degradation

Bisphenol A (BPA) as a trace contaminant has been reported, due to widespread use in the plastics industry. This study applied the 35 kHz ultrasound (US) to activate four different common oxidants (H₂O₂, HSO₅^-, S₂O₈^2-, and IO₄^-) for BPA degradation. With increasing initial concentration of oxidants, the degradation rate of BPA increased. The synergy index confirmed that a synergistic relationship between US and oxidants. This study also examined the impact of pH and temperature. The results showed that the kinetic constants of US, US-H₂O₂, US-HSO₅^- and US-IO₄^-decreased when the pH increased from 6 to 11. The optimal pH for US-S₂O₈^2- was 8. Notably, increasing temperature decreased the performance of US, US-H₂O₂, and US-IO₄^- systems, while it could increase the degradation of BPA in US-S₂O₈^2- and US-HSO₅^-. The activation energy for BPA decomposition using the US-IO₄^- system was the lowest, at 0.453nullkJnullmol^-1, and the synergy index was the highest at 2.22. Additionally, the ΔG# value was found to be 2.11 + 0.29T when the temperature ranged from 25 °C to 45 °C. The main oxidation contribution is achieved by hydroxyl radicals in scavenger test. The mechanism of activation of US-oxidant is heat and electron transfer. In the case of the US-IO₄^- system, the economic analysis yielded 271 kwh m^-3, which was approximately 2.4 times lower than that of the US process.

Coal Fly Ash Decorated with Graphene and Polyaniline Nanocomposites for Effective Adsorption of Hexavalent Chromium and Its Reuse for Photocatalysis

Coal fly ash was functionalized and modified with graphene oxide and polyaniline (CFA/GO/PANI nanocomposite) through hydrothermal synthesis, which was used for remediation of hexavalent chromium (Cr(VI)) ions. Batch adsorption experiments were carried out to investigate the effects of adsorbent dosage, pH, and contact time on the removal of Cr(VI). The ideal pH for this work was 2, and it was used for all other studies. The Cr(VI)-loaded spent adsorbent CFA/GO/PANI + Cr(VI) was reused as a photocatalyst for the degradation of bisphenol A (BPA). The CFA/GO/PANI nanocomposite removed Cr(VI) ions rapidly. The adsorption process was best described by pseudo-second-order kinetics and the Freundlich isotherm model. The CFA/GO/PANI nanocomposite demonstrated a high adsorption capacity of 124.72 mg/g for Cr(VI) removal. In addition, the Cr(VI)-loaded spent adsorbent played a significant role in the photocatalytic degradation of BPA with 86% degradation. The reuse of the Cr(VI)-loaded spent adsorbent as a photocatalyst presents a new solution for the reduction of secondary waste from the adsorption process.

Boosting photocatalytic property of graphitic carbon nitride with metal complex fabrication for efficient degradation of organic pollutants

The development of efficient and stable photocatalysts for degradation of refractory pollutants using minimal amounts of metal remains a major challenge. Herein, we synthesize a novel catalyst by fabrication of manganese (III) acetylacetonate complex [Mn (acac)₃] over graphitic carbon nitride (GCN) denoted as 2-Mn/GCN by facile ultra-sonication method. The fabrication of the metal complex enables the migration of electrons from the conduction band of graphitic carbon nitride to Mn (acac)₃, and migration of holes from valence band of Mn (acac)₃ to GCN upon irradiation. Exploiting the improved surface properties, light absorption, and charge separation ensure generation of superoxide and hydroxyl radicals resulting in the rapid degradation of a variety of pollutants. The designed 2-Mn/GCN catalyst realized 99.59% rhodamine b (RhB) degradation in 55 min and 97.6% metronidazole (MTZ) degradation in 40 min with 0.7% Mn content. The influence of catalyst amount, different pH and presence of anions on the degradation kinetics was also explored to offer insights into photoactive material design.

Photocatalytic Inactivation of Co-Culture of E. coli and S. epidermidis Using APTES-Modified TiO2

The presented work shows the antibacterial activity of TiO₂ photocatalysts modified by 3-aminopropyltriethoxysilane (APTES). The APTES-functionalized TiO₂ samples were obtained by the solvothermal process followed by calcination. The antibacterial activity of APTES/TiO₂ samples was evaluated with two species of bacteria, Escherichia coli and Staphylococcus epidermidis, under artificial solar light (ASL) irradiation. The used bacteria are model organisms characterized by negative zeta potential (approx. -44.2 mV for E. coli and -42.3 mV for S. epidermidis). For the first time, the antibacterial properties of APTES-functionalized TiO₂ were evaluated against mono- and co-cultured bacteria. The high antibacterial properties characterized the obtained APTES-modified nanomaterials. The best antibacterial properties were presented in the TiO₂-4 h-120 °C-300 mM-Ar-300 °C sample (modified with 300 mM of APTES and calcined at 300 °C). The improvement of the antibacterial properties was attributed to a positive value of zeta potential, high surface area, and porous volume.

Photoremoval of Bisphenol A Using Hierarchical Zeolites and Diatom Biosilica

Bisphenol A (4,4-isopropylidenediphenol, BPA) is an organic compound widely used, e.g., in the production of epoxy resins, plastics, and thermal receipt papers. Unfortunately, bisphenol A has negative effects on human health, which has prompted the search for an effective method of its removal. One of the most promising methods of its elimination is photocatalytic removal. The aim of this study was to design an effective method for the photocatalytic removal of bisphenol A using, for the first time, hierarchical zeolites and ruthenium ion-modified diatom biosilica, and silver as photocatalysts and optimization of the reaction conditions: temperature, pH, and composition of the reaction mixture as well as the electromagnetic wavelength. Additionally, for the first time, the electromagnetic wavelength that would be most suitable for the study was selected. All materials used were initially characterized by XRD and low-temperature nitrogen adsorption/desorption isotherms. Ruthenium ion-modified biosilica proved to be the most effective catalyst for bisphenol A removal, which occurred at a rate higher than 99%.

Photocatalytic Degradation of 4-tert-butylphenol Using Solar Light Responsive Ag2CO3

In this work, Ag2CO3 was prepared via a solution-based method and was further characterized by XRD, Raman spectroscopy, SEM/EDS analysis, and UV-VIS spectroscopy. SEM results revealed the formation of micro-sized particles with a rectangular shape. The photocatalytic activity of the catalyst was evaluated in the degradation of 4-tert-butylphenol (4-t-BP) under simulated solar light irradiation. The effects of 4-t-BP initial concentration (2.5–10 ppm), catalyst dosage (100–300 mg/L), different types of lamp sources, and water matrix were investigated. Complete 4-t-BP (5 ppm) degradation was achieved after 60 min by Ag2CO3 (200 mg/L). The effect of anions such as CO32−, HCO3−, NO3−, and Cl- in the concentration range of 100–300 mg/L was also studied. CO32− promoted the photocatalytic degradation process, while HCO3− and NO3− exhibited an inhibition effect, which was marked with increasing HCO3− and NO3− concentrations. The presence of Cl− at the concentration of 100 mg/L increased 4-t-BP degradation, but higher concentrations inhibited the photocatalytic reaction. Cyclic experiments showed that the catalyst practically retained its catalytic activity toward 4-t-BP degradation after three successive experimental runs.

Bioremediation of bisphenol A found in industrial wastewater using Trametes versicolor (TV) laccase nanoemulsion-based bead organogel in packed bed reactor

Bisphenol A (BPA) is one of the toxic chemicals, which is widely used for manufacturing epoxy, polyester resin, and polycarbonates. These materials are extensively used in manufacturing of reusable bottles, baby bottles, dental sealants, various medical devices, and so forth. Moreover, canned and packaged foods are sources of bisphenol A, which is unknowingly consumed by many people worldwide. Its endocrine disrupting and teratogenic properties impose potential risk to the wildlife and human health. BPA has been linked to reproductive, metabolic, and immunity disorders in humans. Regardless of BPA ban in reusable and baby bottles, annually, 15 billion pounds of BPA still being produced. BPA pollution and its cleanup are major challenges. Therefore, it is essential to develop a suitable strategy to bioremediate BPA. The Trametes versicolor (TV) laccase-based nanoemulsion calcium alginate bead organogel was able to transform 94% of BPA within 2 h of treatment. Organogel showed 60% of BPA removal from actual industrial wastewater in packed bed batch reactor and 67% of BPA removal in continuous flow packed bed reactor. The biological oxygen demand (BOD) of treated industrial effluent was 14 mg/L, which is very much less than untreated effluent's BOD, which was 48 mg/L. The chemical oxygen demand of industrial effluent was 1240 mg/ml, and treated effluent was 248 mg/L, respectively. Hence, application of nanoemulsion-based organogel in packed bed reactor found to be a potential candidate for the bioremediation of industrial effluent containing BPA. PRACTITIONER POINTS: The TV laccase-based nanoemulsion calcium alginate bead organogel was able to transform 94% of BPA. Organogel showed 67% of BPA removal from industrial wastewater in continuous flow packed bed reactor. The nanoemulsion-based organogel in packed bed reactor found to be potential candidate for the bioremediation of industrial effluent containing BPA.

Bioremediation of Endocrine Disrupting Chemicals- Advancements and Challenges

Endocrine Disrupting Chemicals (EDCs), major group of recalcitrant compounds, poses a serious threat to the health and future of millions of human beings, and other flora and fauna for years to come. A close analysis of various xenobiotics undermines the fact that EDC is structurally diverse chemical compounds generated as a part of anthropogenic advancements as well as part of their degradation. Regardless of such structural diversity, EDC is common in their ultimate drastic effect of impeding the proper functioning of the endocrinal system, basic physiologic systems, resulting in deregulated growth, malformations, and cancerous outcomes in animals as well as humans. The current review outlines an overview of various EDCs, their toxic effects on the ecosystem and its inhabitants. Conventional remediation methods such as physico-chemical methods and enzymatic approaches have been put into action as some form of mitigation measures. However, the last decade has seen the hunt for newer technologies and methodologies at an accelerated pace. Genetically engineered microbial degradation, gene editing strategies, metabolic and protein engineering, and in-silico predictive approaches - modern day's additions to our armamentarium in combating the EDCs are addressed. These additions have greater acceptance socially with lesser dissonance owing to reduced toxic by-products, lower health trepidations, better degradation, and ultimately the prevention of bioaccumulation. The positive impact of such new approaches on controlling the menace of EDCs has been outlaid. This review will shed light on sources of EDCs, their impact, significance, and the different remediation and bioremediation approaches, with a special emphasis on the recent trends and perspectives in using sustainable approaches for bioremediation of EDCs. Strict regulations to prevent the release of estrogenic chemicals to the ecosystem, adoption of combinatorial methods to remove EDC and prevalent use of bioremediation techniques should be followed in all future endeavors to combat EDC pollution. Moreover, the proper development, growth and functioning of future living forms relies on their non-exposure to EDCs, thus remediation of such chemicals present even in nano-concentrations should be addressed gravely.

Green synthesis of SrO bridged LaFeO3/g-C3N4 nanocomposites for CO2 conversion and bisphenol A degradation with new insights into mechanism

Very recently the green synthesis routes of nanomaterials have attracted massive attention as it overcome the sustainability concerns of conventional synthesis approaches. With this heed, in this novel research work we have synthesized the g-C₃N₄ nanosheets based nanocomposites by utilizing Eriobotrya japonica as mediator and stabilizer agent. Our designed bio-caped and green g-C₃N₄ nanosheets based nanocomposites have abundant organic functional groups, activated surface and strong adsorption capability which are very favorable for conversion CO₂ into useful products and bisphenol A degradation. Beneficial to further upgrade the performances of g-C₃N₄ nanosheets, the resulting pristine g-C₃N₄ nanosheets are coupled with LaFeO₃ nanosheets via SrO bridge. Based on our experimental results such as TEM, XRD, DRS, TPD, TGA, PL, PEC and FS spectra linked with OH amount it is confirmed that the biologically mediated green g-C₃N₄ nanosheets are eco-friendly, highly efficient and stable. Furthermore, the coupling of LaFeO₃ nanosheets enlarged the surface area, enhanced the charge separation, while the insertion of SrO bridge worked as facilitator for electron transportation and photo-electron modulation. In contrast to pristine green g-C₃N₄ nanosheets (GCN), the activities of final resulting sample 6LFOS-(4SrO)-GCN are improved by 8.0 times for CO₂ conversion (CH₄ = 4.2, CO = 9.2 μmol g^-1 h^-1) and 2.5-fold for bisphenol A degradation (88%) respectively. More specifically, our current research work will open a new gateway to design cost effective, eco-friendly and biological inspired green nanomaterials for CO₂ conversion and organic pollutants degradation which will further support the net zero carbon emission manifesto and the optimization of carbon neutrality level.

Enhanced photo-fenton and photoelectrochemical activities in nitrogen doped brownmillerite KBiFe2O5

Visible-light-driven photo-fenton-like catalytic activity and photoelectrochemical (PEC) performance of nitrogen-doped brownmillerite KBiFe₂O₅ (KBFO) are investigated. The effective optical bandgap of KBFO reduces from 1.67 to 1.60 eV post N-doping, enabling both enhancement of visible light absorption and photoactivity. The photo-fenton activity of KBFO and N-doped KBFO samples were analysed by degrading effluents like Methylene Blue (MB), Bisphenol-A (BPA) and antibiotics such as Norfloxacin (NOX) and Doxycycline (DOX). 20 mmol of Nitrogen-doped KBFO (20N-KBFO) exhibits enhanced catalytic activity while degrading MB. 20N-KBFO sample is further tested for degradation of Bisphenol-A and antibiotics in the presence of H₂O₂ and chelating agent L-cysteine. Under optimum conditions, MB, BPA, and NOX, and DOX are degraded by 99.5% (0.042 min^-1), 83% (0.016 min^-1), 72% (0.011 min^-1) and 95% (0.026 min^-1) of its initial concentration respectively. Photocurrent density of 20N-KBFO improves to 8.83 mA/cm² from 4.31 mA/cm² for pure KBFO. Photocatalytic and photoelectrochemical (PEC) properties of N-doped KBFO make it a promising candidate for energy and environmental applications.

Recent Advances in Endocrine Disrupting Compounds Degradation through Metal Oxide-Based Nanomaterials

Endocrine Disrupting Compounds (EDCs) comprise a class of natural or synthetic molecules and groups of substances which are considered as emerging contaminants due to their toxicity and danger for the ecosystems, including human health. Nowadays, the presence of EDCs in water and wastewater has become a global problem, which is challenging the scientific community to address the development and application of effective strategies for their removal from the environment. Particularly, catalytic and photocatalytic degradation processes employing nanostructured materials based on metal oxides, mainly acting through the generation of reactive oxygen species, are widely explored to eradicate EDCs from water. In this review, we report the recent advances described by the major publications in recent years and focused on the degradation processes of several classes of EDCs, such as plastic components and additives, agricultural chemicals, pharmaceuticals, and personal care products, which were realized by using novel metal oxide-based nanomaterials. A variety of doped, hybrid, composite and heterostructured semiconductors were reported, whose performances are influenced by their chemical, structural as well as morphological features. Along with photocatalysis, alternative heterogeneous advanced oxidation processes are in development, and their combination may be a promising way toward industrial scale application.

ZnO-CdO nanocomposites incorporated with graphene oxide nanosheets for efficient photocatalytic degradation of bisphenol A, thymol blue and ciprofloxacin

The widespread existence of different organic contaminants mostly phenolic compounds, organic dyes and antibiotics in water bodies initiated by the various industrial wastes that raised great scientific concern and public awareness as well recently owing to their prospective capability to spread these contaminants resistant gene and pose hazard to human. In the present study, a series of nanostructured ZnO-CdO incorporated with reduced graphene oxide (ZCG nanocomposites) were successfully synthesized by a simple refluxing method and characterized by using the X-ray diffraction (XRD), Raman spectroscopy, FT-IR spectroscopy, photoluminescence spectroscopy, field emission-scanning microscope (FE-SEM) and UV-visible diffused reflectance spectroscopy (DRS) for the photocatalytic degradation of bisphenol A (BPA), thymol blue (ThB) and ciprofloxacin (CFn) with illumination of UV light. The maximum degradation and mineralization of BPA, ThB and CFn was achieved around 98.5%, 98.38% and 99.28% over the ZCG-5 nanocomposite photocatalyst after UV light irradiation for 180 min, 120 min and 75 min, respectively. The superior photocatalytic activity of ZCG-5 ascribed to enhance adsorption capacity, effective separation of charge carriers consequential for the production of more ROS after incorporation of RGO nanosheets with ZnO-CdO in photocatalyst. The conceivable photocatalytic degradation mechanism of BPA, ThB and CFn was elucidated through ROS identification and the assessment of photocatalyst stability by reusability, EEO (kwh/m³order) and UV light dose (mJ/cm²) were evaluated. The plausible photocatalytic degradation pathways were proposed for the degradation of BPA, ThB and CFn via GC-MS analysis. The present work investigates the efficient removal of BPA, ThB and CFn using ZCG nanocomposites as photocatalyst.

Improving of photocatalytic activity of barium ferrate via bismuth and copper co-doping for degradation of paracetamol under visible light irradiation

Nanosized Ba_1-xBi_xFe_1-xCu_xO₃ (12-50 nm) with x values of 0, 0.01, 0.05, and 0.1 system was prepared using the Pechini method. Structural, morphological, surface and optical characterizations were performed for the prepared samples. Cubic phase was the predominant phase for the undoped BaFeO₃ and Bi and Cu co-doped BaFeO₃ samples. Minor phases of monoclinic Ba₂Fe₂O₅, orthorhombic BaFe₂O₄ and orthorhombic BaCO₃ were identified for all the prepared samples. Ba_0.95Bi_0.05Fe_0.95Cu_0.05O₃ sample has the lowest band gap (2.43 eV). 98.1% paracetamol removal was achieved with 0.75 g/L of Ba_0.95Bi_0.05Fe_0.95Cu_0.05O₃ at pH 9 after 120 min. The paracetamol degradation follows the pseudo first-order kinetics. HO^• is the main oxidative species responsible for the paracetamol degradation. Gas chromatography-mass spectrometry (GC-MS) analysis was performed at the end of the photocatalytic degradation experiment under optimum operating condition using Ba_0.95Bi_0.05Fe_0.95Cu_0.05O₃ to explain the reaction mechanism and identify the intermediate by-products which is confirmed by ultraviolet/visible (UV/Vis) spectroscopy study at different reaction times.

Nanomaterials for the Treatment of Heavy Metal Contaminated Water

Nanotechnology finds its application almost in every field of science and technology. At the same time, it also helps to find the solution to various environment-related problems, especially water contamination. Nanomaterials have many advantages over conventional materials, such as high surface area, both polar and non-polar chemistries, controlled and size-tunable, easier biodegradation, which made them ideal candidates for water and environmental remediation as well. Herein, applications of non-carbon nanomaterials, such as layered double hydroxides, iron oxide magnetite nanoparticles, nano-polymer composites, metal oxide nanomaterials and nanomembranes/fibers in heavy metal contaminated water and environmental remediation are reviewed. These non-carbon nanomaterials, due to their tunable unique chemistry and small size have greater potentials for water and environmental remediation applications.

Nitrogen doped carbon spheres from Tamarindus indica shell decorated with vanadium pentoxide; photoelectrochemical water splitting, photochemical hydrogen evolution & degradation of Bisphenol A

At present energy and environmental remediation are of highest priority for the well defined sustainability. Multifunctional materials that solve both the issues are on high demand. In the present work, a simple method has been followed to extract carbon spheres fromTamarindus indica(commonly known astamarind fruit) shelland doped with nitrogen (N-CS). Vanadium pentoxide nanoflakes were decorated aroundN-CS and the resultant is labeled as V₂O₅/N-CS nanocomposite. The spectroscopic, microscopic, elemental mapping and x-ray photoelectron spectroscopic characterization confirm the nitrogen doping and formation of hybrid material. N-CS, V₂O₅, and V₂O₅/N-CS nanocompositehave been evaluated for their efficiency to evolve hydrogen and for degradation of Bisphenol A (BPA) under visible light. In addition, electrocatalytic hydrogen evolution in presence of light has also been evaluated. The DRS spectrum proves the decrease in the bandgap of V₂O₅ upon its decoration around N-CS material. In a photochemical experiment, the V₂O₅/N-CS nanocomposite evolved 18,600 μmolg^-1 of H_2.Electrochemical hydrogen evolution has also been evaluated in presence of light and obtained the onset potential of -60mV with 52 mV dec^-1 Tafel slope value. Scavenger studies indicate superoxide radicals and hydroxyl radicals are the active species responsible for the degradation of BPA. BPA degradation pathway has been predicted with the support of LC-MS results of the intermediates. All these results indicate the synthesized nanocomposite could be an efficient, stable multifunctional material for photocatalytic applications.

An Insight into a Sustainable Removal of Bisphenol A from Aqueous Solution by Novel Palm Kernel Shell Magnetically Induced Biochar: Synthesis, Characterization, Kinetic, and Thermodynamic Studies

Recently Bisphenol A (BPA) is one of the persistent trace hazardous estrogenic contaminants in the environment, that can trigger a severe threat to humans and environment even at minuscule concentrations. Thus, this work focused on the synthesis of neat and magnetic biochar (BC) as a sustainable and inexpensive adsorbent to remove BPA from aqueous environment. Novel magnetic biochar was efficiently synthesized by utilizing palm kernel shell, using ferric chloride and ferrous chloride as magnetic medium via chemical co-precipitation technique. In this experimental study, the influence of operating factors comprising contact time (20-240 min), pH (3.0-12.0), adsorbent dose (0.2-0.8 g), and starting concentrations of BPA (8.0-150 ppm) were studied in removing BPA during batch adsorption system using neat biochar and magnetic biochar. It was observed that the magnetically loaded BC demonstrates superior maximum removal efficiency of BPA with 94.2%, over the neat biochar. The functional groups (FTIR), Zeta potential, vibrating sample magnetometer (VSM), surface and textural properties (BET), surface morphology, and mineral constituents (FESEM/EDX), and chemical composition (XRD) of the adsorbents were examined. The experimental results demonstrated that the sorption isotherm and kinetics were suitably described by pseudo-second-order model and Freundlich model, respectively. By studying the adsorption mechanism, it was concluded that π-π electron acceptor-donor interaction (EAD), hydrophobic interaction, and hydrogen bond were the principal drives for the adsorption of BPA onto the neat BC and magnetic BC.

Environmentally Benign Formation of Nickel Hexacyanoferrate-Derived Mesoframes for Heterogeneous Catalysis

The tetramethylammonium hydroxide (TMAH)-controlled alkaline etching of nickel hexacyanoferrate (NiHCF) mesocrystals is explored. The alkaline etching enables the formation of hollow framework structures with an increased surface area, the exposure of active Ni and Fe sites and the retention of morphology. The ambient reaction conditions enable the establishment of a sustainable production. Our work reveals novel perspectives on the eco-friendly synthesis of hollow and colloidal superstructures for the efficient degradation of the organic contaminants rhodamine-B and bisphenol-A. In the case of peroxomonosulfate (PMS)-mediated bisphenol-A degradation, the rate constant of the etched mesoframes was 10,000 times higher indicating their significant catalytic activity.

Highly efficient photo-degradation of cetirizine antihistamine with TiO2-SiO2 photocatalyst under ultraviolet irradiation

Photocatalysis is an extraordinary and vastly researched topic; there is a need to find new ways to support producing composite materials that are cost-effective, efficient and have a low environmental impact. The investigation was undertaken on syn TiO2 by depositing it on silica. The results elucidate the positive effect on photocatalysis activity and the macroscopic structure on which the TiO2 is formed. For the analysis of photocatalyst, various characterisation measurements were undertaken, such as XRD, FTIR, DRS, FESEM, TEM, RS, and BET. The accumulated TiO2 onto the surface of SiO2 stabilised its transformation of the phase from anatase to rutile, resulting in decreased particle size and enhancing its photocatalytic activity under UV irradiation. The concentration of OH• radicals was determined using terephthalic acid as a probe molecule to determine its role in the photocatalytic degradation of antihistamine. The results of BET analysis showed that the syn TiO2-SiO2 sample has a large specific surface area of 192.6 m2 g−1. Maximum degradation of cetirizine (about 97%) was achieved with 80% TiO2-20% SiO2 (TS-4). Recyclability test confirmed that 80% TiO2-20% SiO2 sample was stable up to six cycles.

Predicting the trend and utility of different photocatalysts for degradation of pharmaceutically active compounds: A special emphasis on photocatalytic materials, modifications, and performance comparison

The rapid rise in the healthcare sector has led to an increase in pharmaceutically active compounds (PhACs) in different aqueous bodies. The toxicity of the PhACs and their ability to persist after conventional treatment processes have escalated research in the field of photocatalytic treatment. Although different photocatalysts have been successful in degrading PhACs, their inherent drawbacks have severely limited their application on a large scale. A substantial amount of research has been aimed at overcoming the high cost of the photocatalytic material, low quantum yield, the formation of toxic end products, etc. Hence, to further research in this field, researchers must have a fair idea of the current trends in the application of different photocatalysts. In this article, the trends in the use of various photocatalysts for the removal of different PhACs have been circumscribed. The performance of different groups of photocatalysts to degrade PhACs from synthetic and real wastewater has been addressed. The drawbacks and advantages of these materials have been compared, and their future in the field of PhACs removal has been predicted using S-curve analysis. Zinc and titanium-based photocatalysts were efficient under UV irradiation, while bismuth and graphene-based materials exhibited exemplary performance in visible light. However, iron-based compounds were found to have the most promising future, which may be because of their magnetic properties, easy availability, low bandgap, etc. Different modification techniques, such as morphology modification, doping, heterojunction formation, etc., have also been discussed. This study may help researchers to clarify the current research status in the field of photocatalytic treatment of PhACs and provide valuable information for future research.

Exploring the genotoxicity triggers in the MP UV/H2O2-chloramination treatment of bisphenol A through bioassay coupled with non-targeted analysis

Bisphenol A (BPA) is a well-known xenoestrogen, and UV/H₂O₂ advanced oxidation process (AOP) is one of the most effective technologies to remove BPA from water. Using BPA spiked tap water, a batch-scale photochemical experiment was conducted to investigate whether BPA can pose a genotoxicity concern during the medium pressure (MP) UV/H₂O₂ treatment and the post-chloramination. Samples at different UV exposure and post-chloramination durations were collected and analyzed by CALUX® gene reporter assays regarding estrogen receptor α (ERα) and p53 transcriptional activity. MP UV/H₂O₂ process did not cause extra estrogenic effects from the degradation of BPA, whereas genotoxicity occurred when the treated water was exposed with monochloramine. Seven frequently reported nitrogenous disinfection byproducts (N-DBPs) were detected, but none of them were responsible for the observed genotoxicity. Employed with gas chromatography-quadrupole time-of-flight mass spectrometry (GC-QTOF-MS), four compounds possibly contributed to the genotoxicity were tentatively identified and two of them with aminooxy- or cyano- group were considered as "new" N-DBPs. This study demonstrated that by-products differ from their parent compounds in toxicity can be formed in the UV oxidation with post-disinfection process, which should become a cause for concern.

Sustainable development and enhancement of cracking processes using metallic composites

Metallic composites represent a vital class of materials that has gained increased attention in crude oil processing as well as the production of biofuel from other sources in recent times. Several catalytic materials have been reported in the literature for catalytic cracking, particularly, of crude oil. This review seeks to provide a comprehensive overview of existing and emerging methods/technologies such as metal–organic frameworks (MOFs), metal–matrix composites (MMCs), and catalytic support materials, to bridge information gaps toward sustainable advancement in catalysis for petrochemical processes. There is an increase in industrial and environmental concern emanating from the sulphur levels of oils, hence the need to develop more efficient catalysts in the hydrotreatment (HDS and HDN) processes, and combating the challenge of catalyst poisoning and deactivation; in a bid to improving the overall quality of oils and sustainable use of catalyst. Structural improvement, high thermal stability, enhanced cracking potential, and environmental sustainability represent the various benefits accrued to the use of metallic composites as opposed to conventional catalysts employed in catalytic cracking processes.

New insights of metal free 2D graphitic carbon nitride for photocatalytic degradation of bisphenol A

Polymeric oxygen rich exfoliated graphitic carbon nitride (exfoliated GCN, EGCN) was synthesized by the acid treatment of bulk GCN. The photocatalyst was characterized using X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and point of zero charge. EGCN shows high valance band hole transfer under short-time visible light (λ > 420 nm) exposure for photocatalytic mineralization of bisphenol A (BPA). Enhanced BPA removal was achieved by EGCN (99 %) due to formation of OH^● radicals (H₂O/h_VB⁺ →OH^●/H⁺). Major factors affecting BPA degradation including catalyst dose, wide pH range, and pollutant concentration were optimized. Repeated cycles of BPA degradation were performed with negligible rate decreased from 0.045 to 0.029 min^-1. The degradation profile and plausible reaction mechanism of BPA was established and well justified by the byproducts identified by mass analysis HR-ESI-MS. Therefore, the as-synthesized metal free EGCN, active under visible light, offers a new platform for complete mineralization of byproducts of halogenated organic contaminants.

Bisphenol A removal by the Chlorophyta Picocystis sp.: optimization and kinetic study

The Chlorophyta Picocystis sp. isolated from a Tunisian household sewage pond appears promising for effective removal of Bisphenol A (BPA). Efficient and cost-effective technology for contaminants remediation relies on a tradeoff between several parameters such as removal efficiency, microorganism growth, and its tolerance to contaminant toxicity. This article demonstrates the optimum conditions achieving the highest removal rates and the minimal growth inhibition in batch cultures of Picocystis using response surface methodology. A central composite face-centered (CCF) design was used to determine the effects on removal and growth inhibition of four operating parameters: temperature, inoculum cell density, light intensity, and initial BPA concentration. Results showed that the maximal BPA removal was 91.36%, reached the optimal culture conditions of 30.7 °C, 25 × 10⁵ cells ml^-1 inoculum density, 80.6 µmol photons m^-2 s^-1 light intensity, and initial BPA concentration of 10 mg l^-1. Various substrate inhibition models were used to fit the experimental data, and robustness analysis highlighted the Tessier model as more efficient to account for the interaction between Picocystis and BPA and predict removal efficiency. These results revealed how Picocystis respond to BPA contamination and suggest that optimization of experimental conditions can be effectively used to maximize BPA removal in the treatment process.HighlightsSurface response methodology was applied for optimization of BPA removal by the Chlorophyta Picocystis sp.Temperature, light intensity, inoculum cell density and initial BPA concentration were selected as factors that may affect BPA removal and microalgae growth.The optimal conditions for the maximum BPA removal and minimum growth inhibition were 30.7 °C; 80.6 µmol photons m^-2 s^-1; 25 × 10⁵ cells ml^-1 and 10 mg l^-1 BPA.Teissier model was selected to fit the kinetic of BPA removal by Picocystis with R² = 0.92.

Synthesis, Characterization, and Photocatalytic Evaluation of Manganese (III) Phthalocyanine Sensitized ZnWO4 (ZnWO4MnPc) for Bisphenol A Degradation under UV Irradiation

ZnWO₄MnPc was synthesized via a hydrothermal autoclave method with 1 wt.% manganese (iii) phthalocyanine content. The material was characterized for its structural and morphological features via X-ray diffraction (XRD) spectroscopy, Fourier transform infrared (FTIR) spectroscopy, transmission emission microscopy (TEM), scanning electron microscopy-Energy dispersive X-ray spectroscopy (SEM-EDX), N₂ adsorption-desorption at 77K, X-ray photoelectron spectroscopy (XPS), and UV-visible/diffuse reflectance spectroscopy(UV-vis/DRS). ZnWO₄MnPc photocatalytic performance was tested on the degradation of bisphenol A (BPA). The ZnWO₄MnPc material removed 60% of BPA after 4 h of 365 nm UV irradiation. Degradation process improved significantly to about 80% removal in the presence of added 5 mM H₂O₂ after 4 h irradiation. Almost 100% removal was achieved after 30 min under 450 nm visible light irradiation in the presence of same concentration of H₂O₂. The effect of ions and humic acid (HA) towards BPA removal was also investigated.

Photocatalytic degradation of an agro-industrial wastewater model compound using a UV LEDs system: kinetic study

An ultraviolet light emitting diode (UV-A LED) system was built to test the capability of performing heterogeneous photocatalysis using TiO₂ P25. The LEDs maximum wavelength is 365 nm with an irradiance power of 85 W m^-2. The device was tested in batch and continuous (CSTR) mode in a laboratorial scale reactor. The degradation of an agro-industrial wastewater model compound (p-hydroxybenzoic acid, pHBA) was investigated, assessing the effect of different experimental conditions such as pH, pHBA and TiO₂ concentration keeping constant the UV-A LEDs power and temperature. The photodegradation of different concentrations of pHBA with [TiO₂] = 500 mg L^-1, I_UV = 85 W m^-2 and a T = 21 °C were analysed by pseudo-first order kinetics. The results were applied to the Langmuir-Hinshelwood model yielding k_c = 0.885 mg L^-1 min^-1 and k_LH = 0.217 L mg^-1. In a comparative experiment the UV-A LEDs system showed faster kinetics (k = 0.0134 min^-1) than solar radiation (I_UV = 23 W m^-2; k = 0.0077 min^-1), with [pHBA] = 75 mg L^-1 and [TiO₂] = 500 mg L^-1. The values of the Electric Energy per Order (E_EO) = 115 kWh m^-3 order^-1 and the Specific Applied Energy (E_SAE) = 318 kWh mol^-1 order^-1 were obtained with [TiO₂] = 1000 mg L^-1 and [pHBA] = 50 mg L^-1. Analogous results were obtained ([TiO₂] = 500 mg L^-1) in a CSTR with a slight decrease in the first order kinetic constant due to the "non-ideal" reactor: from 0.0284 to 0.0158 min^-1 and from 0.0143 to 0.00825 min^-1 with [pHBA] = 50 mg L^-1 and 75 mg L^-1, respectively. This work shows that photocatalytic reactors with UV-A LEDs can advantageously replace conventional UV mercury lamps based reactors in the photodegradation of phenolic compounds.

Impact of Titanium Dioxide (TiO2) Modification on Its Application to Pollution Treatment—A Review

A high-efficiency method to deal with pollutants must be found because environmental problems are becoming more serious. Photocatalytic oxidation technology as the environmentally-friendly treatment method can completely oxidate organic pollutants into pollution-free small-molecule inorganic substances without causing secondary pollution. As a widely used photocatalyst, titanium dioxide (TiO2) can greatly improve the degradation efficiency of pollutants, but several problems are noted in its practical application. TiO2 modified by different materials has received extensive attention in the field of photocatalysis because of its excellent physical and chemical properties compared with pure TiO2. In this review, we discuss the use of different materials for TiO2 modification, highlighting recent developments in the synthesis and application of TiO2 composites using different materials. Materials discussed in the article can be divided into nonmetallic and metallic. Mechanisms of how to improve catalytic performance of TiO2 after modification are discussed, and the future development of modified TiO2 is prospected.

Photocatalytic degradation of a typical neonicotinoid insecticide: nitenpyrum by ZnO nanoparticles under solar irradiation

The photodegradation and mineralization of the nitenpyrum [(E)-N-(6-chloro-3-pyridylmethyl)-N-ethyl-N'-methyl-2-nitrovinylidenediamine], which is one of the most popular neonicotinoid insecticides, were conducted in the presence of ZnO photocatalyst under solar irradiation. An initial nitenpyrum concentration of 10 ppm was completely degraded in the presence of ZnO after 30 min irradiation, while only 70% degradation was observed in the absence of ZnO. The effect of different parameters, for example, amount of ZnO, initial pH, light intensity, reaction temperature, and irradiation time, on the photocatalytic degradation of nitenpyrum was also evaluated. The drop of total organic carbon (TOC) as a consequence of mineralization of nitenpyrum was observed during the photocatalytic process. The kinetics of photocatalytic degradation followed a pseudo-first order law according to Langmuir-Hinshelwood model, and the rate constant is 0.140 min^-1. CO₂, chloride, and nitrate ions were observed as the end-products after completing degradation of nitenpyrum. The four kinds of intermediate products were identified by GC-MS during the decomposition of nitenpyrum. In order to investigate the degradation pathway of nitenpyrum, the point charge and frontier electron density at each atom on the molecule were determined using molecular orbital (MO) stimulation. The degradation mechanism was proposed, based on the identified intermediates. The solar photocatalytic degradation method can become an effective technique for the treatment of nitenpyrum-polluted water.

Effects of Structural Factors of Hydrated TiO2 on Rutile TiO2 Pigment Preparation via Short Sulfate Process

The structural factors such as crystal structure, particle size distribution and impurity content of hydrated TiO₂ had great effects on the structures and pigment properties of the rutile TiO₂. The rutile TiO₂ white pigment was prepared via the Short Sulfate Process from low concentration industrial TiOSO₄ solution. In order to produce rutile TiO₂ pigment with good structures and excellent pigment properties, the crystal size of the hydrated TiO₂ should be controlled less than 8.9 nm and as close as possible to 7.9 nm, which could effectively promote the phase transformation and crystal growth of the rutile TiO₂. The appropriate particle size distribution of hydrated TiO₂ had obvious effects on obtaining rutile TiO₂ with narrower particle size distribution and near 0.20 µm. It was best to adjust the hydrolysis conditions to reduce the specific surface area of the hydrated TiO₂ so as to reduce the iron ion impurity adsorption.

Efficient removal of parabens from real water matrices by a metal-free carbon nitride photocatalyst

Metal-free graphite-like carbon nitride (GCN-500) was obtained by thermal post-treatment of bulk polymeric carbon nitride at 500 °C. The catalyst was thoroughly characterized by morphological, optical and textural analysis techniques. The efficiency of GCN-500 was evaluated under visible (λ_exc = 417 nm) LED excitation for the photocatalytic degradation of methyl-, ethyl- and propyl-paraben in different water matrices either isolated or in a mixture of the three compounds. The GCN-500 proved to be more efficient than the benchmark TiO₂ P25, with complete conversion of the individual parabens within 20 min of irradiation, contrasting with 120 min needed for total degradation using TiO₂. Experiments in the presence of selected scavengers confirmed the high importance of superoxide radicals in the photocatalytic oxidation of parabens using GCN-500. The effect of the nature of the aqueous matrix in the kinetics of the photocatalytic process was assessed using ultrapure, tap and river waters spiked with a mixture of the three parabens. Although still very efficient, the complexity of the real water samples turned the degradation process slower due to the presence of other components such as ions and dissolved organic matter. GCN-500 proved to be stable in a continuous-flow system using GCN-500 coated glass rings (GCN-500-GR) to remove MP, EP and PP from real water matrices.

Functional CdS-Au Nanocomposite for Efficient Photocatalytic, Photosensitizing, and Two-Photon Applications

We demonstrate a low-temperature synthesis of hydrophilic, penicillamine-stabilized hybrid CdS-Au nanoparticles (NPs) utilizing different Au concentrations. The obtained hybrid nanomaterials exhibit photoluminescence quenching and emission lifetime reduction in comparison with their raw semiconductor CdS NPs counterparts. An increase of concentration of Au present at the surface of CdS leads to lower photoluminescence intensity and faster emission decays, suggesting more efficient charge separation when larger Au domains are present. For photocatalysis studies, we performed methylene blue (MB) absorption measurements under irradiation in the presence of CdS-Au NPs. After 1 h of light exposure, we observed the absorbance decrease to about 35% and 10% of the initial value for the CdS-5Au and CdS-7.5Au (the hybrid NPs obtained in a presence of 5.0 and 7.5 mM Au), respectively, which indicates MB reduction caused by electrons effectively separated from holes on metal surface. In further similar photocatalysis experiments, we measured bovine serum albumin (BSA) integrated photoluminescence intensity quenching in the presence of CdS-Au NPs, with a 50% decrease being obtained for CdS-2.5Au NPs and CdS-5Au NPs, with a faster response rate detected for the system prepared with a higher Au concentration. The results suggest hole-driven reactive oxygen species (ROS) production, causing BSA degeneration. Finally, we performed two-photon excited emission (TPEE) measurements for CdS-5Au NPs, obtaining their two-photon absorption (TPA) cross-section values up to 15.8 × 10³ GM (Goeppert-Mayer units). We conclude that the obtained water-soluble CdS-Au NPs exhibit potential triple functionalities as photocatalysts for reduction and oxidation reactions as well as materials for two-photon absorption applications, so that they may be considered as future theranostics.

In Situ Charge Transfer at the Ag@ZnO Photoelectrochemical Interface toward the High Photocatalytic Performance of H2 Evolution and RhB Degradation

Designing an efficient hybrid structure photocatalyst for photocatalytic decomposition and hydrogen (H₂) evolution has been considered a great choice to develop renewable technologies for clean energy production and environmental remediation. Enhanced charge transfer (CT) based on the interaction between a noble metal and a semiconductor is a crucial factor influencing the movement of photogenerated electron-hole pairs. Herein, we focus on the recent advances related to plasmon-enhanced noble metals and the semiconductor nature to drive the photocatalytic H₂ production and photodegradation of the organic dye rhodamine B (RhB) under UV and visible light irradiation. Specifically, the combination of concerted catalysis and green nanoengineering strategies to design ZnO-based composite photocatalysts and their decoration with metallic Ag have been realized by the radio frequency (RF) sputtering technique at room temperature. This simultaneity enhances the interface coupling between Ag and ZnO and reduces the energy threshold. The creation of charge transfer in the heterojunction and Schottky barrier changes the photoelectronic properties of the as-synthesized Al-doped ZnO (AZO); afterward, these effects promote the migration, transportation, and separation of photoinduced charge carriers and enhance the light-harvesting efficiency. As a result, the as-synthesized AZO-20 hybrid nanostructure exhibits a photocurrent density of 2.5 mA/cm² vs Ag/AgCl, which is improved by almost 12 times compared with that of bare ZnO (0.2 mA/cm²). The hydrogen evolution rates of AZO-20 were ∼38 and ∼24 μmol/h under UV and visible light exposure, which are almost five- and tenfold higher than those of pristine ZnO, respectively. Additionally, the RhB degradation efficacies of the obtained AZO-20 were greater than almost 97 and 82% under UV and visible light illumination, respectively. The achieved apparent rate constant for the photocatalytic RhB decomposition was 0.014 min^-1, indicating that it is 14-fold than that in pristine ZnO (0.001 min^-1). Heterostructure AZO photocatalysts possess excellent practical stability in the water-splitting reaction and photocatalytic RhB decomposition, posing as promising candidates in practical works for pollution and energy challenges.