Efficacy of Recombinant Human BMP2 and PDGF-BB in Orofacial Bone Regeneration: A Systematic Review and Meta-analysis

Local E-rhBMP-2/β-TCP Application Rescues Osteocyte Dendritic Integrity and Reduces Microstructural Damage in Alveolar Bone Post-Extraction in MRONJ-like Mouse Model

The pathology of medication-related osteonecrosis of the jaw (MRONJ), often associated with antiresorptive therapy, is still not fully understood. Osteocyte networks are known to play a critical role in maintaining bone homeostasis and repair, but the exact condition of these networks in MRONJ is unknown. On the other hand, the local application of E-coli-derived Recombinant Human Bone Morphogenetic Protein 2/β-Tricalcium phosphate (E-rhBMP-2/β-TCP) has been shown to promote bone regeneration and mitigate osteonecrosis in MRONJ-like mouse models, indicating its potential therapeutic application for the treatment of MRONJ. However, the detailed effect of BMP-2 treatment on restoring bone integrity, including its osteocyte network, in an MRONJ condition remains unclear. Therefore, in the present study, by applying a scanning electron microscope (SEM) analysis and a 3D osteocyte network reconstruction workflow on the alveolar bone surrounding the tooth extraction socket of an MRONJ-like mouse model, we examined the effectiveness of BMP-2/β-TCP therapy on the alleviation of MRONJ-related bone necrosis with a particular focus on the osteocyte network and alveolar bone microstructure (microcrack accumulation). The 3D osteocyte dendritic analysis showed a significant decrease in osteocyte dendritic parameters along with a delay in bone remodeling in the MRONJ group compared to the healthy counterpart. The SEM analysis also revealed a notable increase in the number of microcracks in the alveolar bone surface in the MRONJ group compared to the healthy group. In contrast, all of those parameters were restored in the E-rhBMP-2/β-TCP-treated group to levels that were almost similar to those in the healthy group. In summary, our study reveals that MRONJ induces osteocyte network degradation and microcrack accumulation, while application of E-rhBMP-2/β-TCP can restore a compromised osteocyte network and abrogate microcrack accumulation in MRONJ.

Evaluating the efficacy of recombinant human growth factors in scar remodelling for patients with facial soft tissue injuries

Facial soft tissue injuries, often resulting in scarring, pose a challenge in reconstructive and aesthetic surgery due to the need for functional and aesthetic restoration. This study evaluates the efficacy of recombinant human growth factors (rhGFs) in scar remodelling for such injuries. A retrospective evaluation was conducted from January 2020 to January 2023, involving 100 patients with facial soft tissue injuries. Participants were divided equally into a control group, receiving standard cosmetic surgical repair, and an observation group, treated with rhGFs supplemented cosmetic surgery. The study assessed scar characteristics (pigmentation, pliability, vascularity, height), hospital stay duration, tissue healing time, complication rates and patient satisfaction. The observation group demonstrated significant improvements in all scar characteristics, with notably better pigmentation, pliability, vascularity and height compared with the control group. The rhGF treatment also resulted in reduced hospital stay duration and faster tissue healing. Notably, the total complication rate was significantly lower in the observation group (10%) compared with the control group (34%). Additionally, patient satisfaction levels were higher in the observation group, with 98% combined satisfaction compared with 76% in the control group. The application of rhGFs in treating facial soft tissue injuries significantly enhances scar remodelling, expedites healing, reduces complications and improves patient satisfaction. These findings establish rhGFs as a valuable tool in the management of facial soft tissue injuries, highlighting their potential in improving both functional and aesthetic outcomes.

Current and Future Developments in Wound Healing

Poor wound healing on the face and neck can lead to significant morbidity and dissatisfaction in facial plastic surgery. With current advances in wound healing management and commercially available biologic and tissue-engineered products, there are several options available to optimize acute wound healing and treat delayed or chronic wounds. This article summarizes some of the key principals and recent developments in wound healing research in addition to potential future advancements in the field of soft tissue wound healing.

Sclerostin deficiency effectively promotes bone morphogenetic protein-2-induced ectopic bone formation

BACKGROUND AND OBJECTIVE

Severe periodontitis causes alveolar bone resorption, resulting in tooth loss. Developments of tissue regeneration therapy that can restore alveolar bone mass are desired for periodontal disease. The application of bone morphogenetic protein-2 (BMP-2) has been attempted for bone fractures and severe alveolar bone loss. BMP-2 reportedly induces sclerostin expression, an inhibitor of Wnt signals, that attenuates bone acquisition. However, the effect of sclerostin-deficiency on BMP-2-induced bone regeneration has not been fully elucidated. We investigated BMP-2-induced ectopic bones in Sost-knockout (KO) mice.

METHODS

rhBMP-2 were implanted into the thighs of C57BL/6 (WT) and Sost-KO male mice at 8 weeks of age. The BMP-2-induced ectopic bones in these mice were examined on days 14 and 28 after implantation.

RESULTS

Immunohistochemical and quantitative RT-PCR analyses showed that BMP-2-induced ectopic bones expressed sclerostin in osteocytes on days 14 and 28 after implantation in Sost-Green reporter mice. Micro-computed tomography analysis revealed that BMP-2-induced ectopic bones in Sost-KO mice showed a significant increased relative bone volume and bone mineral density (WT = 468 mg/cm³ , Sost-KO = 602 mg/cm³ ) compared with those in WT mice on day 14 after implantation. BMP-2-induced ectopic bones in Sost-KO mice showed an increased horizontal cross-sectional bone area on day 28 after implantation. Immunohistochemical staining showed that BMP-2-induced ectopic bones in Sost-KO mice had an increased number of osteoblasts with osterix-positive nuclei compared with those in WT mice on days 14 and 28 after implantation.

CONCLUSION

Sclerostin deficiency increased bone mineral density in BMP-2-induced ectopic bones.

Abaloparatide outperforms teriparatide in protecting against alveolar bone loss in experimental periodontitis

BACKGROUND

The aim of this study was to compare the effects of two osteoanabolic drugs, abaloparatide (ABL) and teriparatide (TPTD), on protecting alveolar bone in experimental periodontitis.

METHODS

Twenty-four 9-week-old, male, Sprague-Dawley rats were placed with silk suture around the right maxillary second molar, and then were randomly divided into three groups, that is, the ABL, TPTD, and saline group, receiving intermittent subcutaneous injections of ABL (80 μg/kg), TPTD (80 μg/kg) or saline respectively every other day for 4 weeks. Samples on both sides were assessed through micro-computerized tomography, histological, and immunohistochemical analysis. Mouse pre-osteoblast MC3T3 cell was cultured with lipopolysaccharide (LPS) and treated with ABL or TPTD, before assays of cell proliferation, alkaline phosphatase (ALP) activity and real-time polymerase chain reaction.

RESULTS

On the ligature side, both ABL and TPTD significantly reduced alveolar bone loss, and ABL had significantly better effects with higher expression of runt-related transcription factor 2 (RUNX2) and Bglap (formerly called osteocalcin); meanwhile, the ligature induced osteoclastogenesis and down-regulation of osteoprotegerin (OPG) was affected by neither drug. On the non-ligature side, ABL also showed better osteoanabolic effects. In vitro studies revealed that, in the presence of LPS, ABL, and TPTD similarly promoted MC3T3 proliferation, whereas ABL induced higher ALP activity and osteoblastic gene expression compared to TPTD.

CONCLUSION

Both ABL and TPTD protect and regenerate alveolar bone in experimental periodontitis, and ABL behaves even better than TPTD at the same dose, attributed to its stronger osteoanabolic effects in this context.

Bone Morphogenetic Protein 2 Promotes Bone Formation in Bone Defects in Which Bone Remodeling Is Suppressed by Long-Term and High-Dose Zoledronic Acid

The use of long-term and high-dose bisphosphate is associated with severely suppressed bone turnover and the delayed union of fractures. However, therapeutic methods to overcome the negative effects of bisphosphonate use are lacking. Bone morphogenetic proteins (BMPs) are powerful osteoinductive proteins. The development of the delivery system using BMP has been verified to have an excellent effect on fracture healing and the enhancement of osteointegration. We hypothesized that BMPs had similar effects as autografts in patients with decreased bone healing potential due to long-term bisphosphonate treatment. Forty rats were divided into the following four groups depending upon the materials implanted into the femoral defect after ten weeks of bisphosphonate (zoledronic acid) injections: Group I: absorbable collagen sponge (control); group II: demineralized freeze-dried bone graft; group III: autogenous bone graft; and group IV: rhBMP-2 with an absorbable collagen sponge. Radiographic union, micro-computed tomography (CT) analysis, manual palpation, and histologic analysis were evaluated. The radiographic union rate, manual union rate, and micro-CT bone volume in groups III and IV were significantly higher than those in groups I and II. Groups III and IV showed similar results to each other. Although the amount of immature bone in the BMP-treated group was large, the effect was similar to that of autografts in the bone defect model in which bone turnover was severely reduced by bisphosphonate treatment. BMP might be a good substitute for autografts in patients with decreased bone healing potential due to long-term bisphosphonate treatment.

Characterization of eggshell as a bio-regeneration material

Objective

The objective of this study was to identify and summarize the characteristic features of eggshell for regeneration purpose in oral surgery procedures.

Methods

A review of literature was undertaken based on the PubMed database. A search to reveal the current state of knowledge and the current uses of the eggshell as a biomaterial was performed. The characteristics of the materials, the specific use, the procedure and the outcome were extracted from the articles.

Results

The materials have been found to be used in humans, animals, and in vitro studies. There is a wide use regarding oral surgery especially in experimental models. There have also been attempts to enhance certain properties and improve the capabilities of eggshell as a biomaterial. There is yet a commercial product to be developed and approved for human use.

Conclusions

Eggshell can be an important biowaste which can be of use in guided bone regeneration procedures, but it has not yet entered the commercial phase and approval through official regulation channels.

Multiple ways for the same destination: bone regeneration

The regeneration of the bone is a challenging topic for maxillofacial plastic and reconstructive surgeons. For successful bone regeneration, timely providing of essential components is prerequisite. They are cellular components (osteoblasts, osteoclasts, and immune cells), extracellular matrix, and inorganic components (calcium and phosphate). Any deficient component can be provided from outside as a graft. Accordingly, there are many ways for successful bone regeneration. Selection of appropriate methods in an individualized situation is important.

SBA-15 Mesoporous Silica as Delivery Vehicle for rhBMP-2 Bone Morphogenic Protein for Dental Applications

(1) Background: A proposed approach to promote periodontal tissue regeneration in cases of peri-implantitis is the local administration of growth factors at the implant site. Recombinant human bone morphogenetic protein-2 (rh-BMP-2) can effectively promote bone regeneration and osseointegration and the development of appropriate carriers for its delivery is of paramount importance. The aim of the present study was to develop SBA-15 mesoporous nanoparticles (MSNs) with varying porosity, evaluate their biocompatibility with human Periodontal Ligament Cells (hPDLCs) and to investigate their effectiveness as carriers of rh-BMP-2. (2) Methods: SBA-15 type mesoporous silicas were synthesized via sol-gel reaction. The calcined SBA-15 samples were characterized by N2 porosimetry, Fourier transform-infrared spectrometry (FTIR), Scanning (SEM) and Transmission Electron Microscopy (TEM). Rh-BMP-2 loading and release kinetics were evaluated by UV spectroscopy. (3) Results: MSNs presented hexagonally arranged, tubular pores of varying length and diameter. Slightly higher loading capacity was achieved for SBA-15 with large pores that presented good hemocompatibility. MTT assay revealed no cytotoxic effects for all the tested materials, while SBA-15 with large pores induced a significant upregulation of cell viability at day 5. (4) Conclusions: SBA-15 MSNs may prove a valuable delivery platform towards the effective release of bone-inducing proteins.

Clinically relevant preclinical animal models for testing novel cranio-maxillofacial bone 3D-printed biomaterials

Bone tissue engineering is a rapidly developing field with potential for the regeneration of craniomaxillofacial (CMF) bones, with 3D printing being a suitable fabrication tool for patient-specific implants. The CMF region includes a variety of different bones with distinct functions. The clinical implementation of tissue engineering concepts is currently poor, likely due to multiple reasons including the complexity of the CMF anatomy and biology, and the limited relevance of the currently used preclinical models. The 'recapitulation of a human disease' is a core requisite of preclinical animal models, but this aspect is often neglected, with a vast majority of studies failing to identify the specific clinical indication they are targeting and/or the rationale for choosing one animal model over another. Currently, there are no suitable guidelines that propose the most appropriate animal model to address a specific CMF pathology and no standards are established to test the efficacy of biomaterials or tissue engineered constructs in the CMF field. This review reports the current clinical scenario of CMF reconstruction, then discusses the numerous limitations of currently used preclinical animal models employed for validating 3D-printed tissue engineered constructs and the need to reduce animal work that does not address a specific clinical question. We will highlight critical research aspects to consider, to pave a clinically driven path for the development of new tissue engineered materials for CMF reconstruction.

The use of rhBMP2 for augmentation of established horizontal/vertical defects may require additional use of rhVEGF to achieve significant bone regeneration: An in vivo experimental study

AIM

To test the hypothesis that the use of rhBMP2 in established defects requires additional growth factors such as rhVEGF to accomplish effective bone repair.

MATERIALS AND METHODS

Horizontal/vertical defects of 2 cm length and 1 cm height were created bilaterally in the alveolar crest of the maxillae of 18 minipigs together with the extraction of all premolar teeth and one molar tooth on both sides. After 3 months of healing, defects were augmented with 0.5 g particulate PDLLA/CaCO3 composite loaded with 400 µg rhBMP2/50 µg rhVEGF165 on one side and 800 µg rhBMP2 on the other in 12 test animals, whereas defects in six control animals were sham operated and left unfilled on one side and augmented with blank carriers on the other. After 4 and 13 weeks, the animals were evaluated each for area of new bone formation (mm²) and bone density (area %).

RESULTS

Augmentations with carriers loaded with 800 g µrhBMP2 failed to induce significantly more bone than in the augmentations with unloaded carrier after 4 and 13 weeks (p = .1000, p = .381). Augmentations with carriers loaded with 400 µg rhBMP2 and 50 µg erhVEGF165 resulted in significantly increased bone formation after 13 weeks (p = .024) compared to blank carriers. Soft tissue in augmentations with combined rhBMP2/rhVEGF165 loading exhibited numerous microvessels compared to soft tissue in augmentations with rhBMP2.

CONCLUSIONS

It is concluded that effective bone regeneration in augmentations of established alveolar ridge defects may require the application of rhVEGF additionally to rhBMP2.

Current Biological Strategies to Enhance Surgical Treatment for Rotator Cuff Repair

Rotator cuff tear is one of the most common shoulder problems encountered by orthopedic surgeons. Due to the slow healing process and high retear rate, rotator cuff tear has distressed millions of people all around the world every year, especially for the elderly and active athletes. This disease significantly impairs patients' motor ability and reduces their quality of life. Besides conservative treatment, open and arthroscopic surgery contributes a lot to accelerate the healing process of rotator cuff tear. Currently, there are many emerging novel treatment methods to promote rotator cuff repair. A variety of biological stimulus has been utilized in clinical practice. Among them, platelet-rich plasma, growth factors, stem cells, and exosomes are the most popular biologics in laboratory research and clinical trials. This review will focus on the biologics of bioaugmentation methods for rotator cuff repair and tendon healing, including platelet-rich plasma, growth factors, exosomes and stem cells, etc. Relevant studies are summarized in this review and future research perspectives are introduced.

Guided bone regeneration with osteoconductive grafts and PDGF: A tissue engineering option for segmental bone defect reconstruction

Regeneration and reconstruction of segmental bone defects (SBD) is a clinical challenge in maxillofacial surgery and orthopedics. The present study evaluated efficacy of guided bone-regeneration (GBR) of rat femoral SBD using osteoconductive equine-bone (EB) and beta-tricalcium phosphate (beta-TCP) grafts, either with or without platelet-derived growth-factor (PDGF). Following ethical-approval, 50 male Wistar-Albino rats (aged ~12-15 months and weighing ~450-500 g) were included. A 5 mm femoral critical-size SBD was created and animals were divided into five groups depending on the graft material used for GBR (EB, EB + PDGF, Autograft, beta-TCP, beta-TCP + PDGF; n = 10/group). Following 12-weeks of healing, animals were sacrificed and femur specimens were analyzed through qualitative histology and quantitative histomorphometry. There was new bone bridging femoral SBD in all groups and qualitatively, better bone formation was seen in autograft and EB + PDGF groups. Histomorphometric bone-area (BA %) was significantly high in autograft group, followed by EB + PDGF, beta-TCP + PDGF, EB, and beta-TCP groups. Addition of PDGF to EB and beta-TCP during GBR resulted in significantly higher BA%. After 12-weeks of healing, EB + PDGF for GBR of rat femoral segmental defects resulted in new bone formation similar to that of autograft. Based on this study, GBR with EB and adjunct PDGF could be a potential clinical alternative for reconstruction and regeneration of segmental bone defects.

Does Platelet-Rich Fibrin Enhance the Early Angiogenetic Potential of Different Bone Substitute Materials? An In Vitro and In Vivo Analysis

The impaired angiogenic potential of bone substitute materials (BSMs) may limit regenerative processes. Therefore, changes in the angiogenetic properties of different BSMs in combination with platelet-rich fibrin (PRF) in comparison to PRF alone, as well as to native BSMs, were analyzed in vitro and in vivo to evaluate possible clinical application. In vitro, four BSMs of different origins (allogeneic, alloplastic, and xenogeneic) were biofunctionalized with PRF and compared to PRF in terms of platelet interaction and growth factor release (vascular endothelial growth factor (VEGF), tissue growth factor ß (TGFß) and platelet-derived growth factor (PDGF)) after 15 min. To visualize initial cell–cell interactions, SEM was performed. In vivo, all BSMs (±PRF) were analyzed after 24 h for new-formed vessels using a chorioallantoic membrane (CAM) assay. Especially for alloplastic BSMs, the addition of PRF led to a significant consumption of platelets (p = 0.05). PDGF expression significantly decreased in comparison to PRF alone (all BSMs: p < 0.013). SEM showed the close spatial relation of each BSM and PRF. In vivo, PRF had a significant positive pro-angiogenic influence in combination with alloplastic (p = 0.007) and xenogeneic materials (p = 0.015) in comparison to the native BSMs. For bio-activated xenogeneic BSMs, the branching points were also significantly increased (p = 0.005). Finally, vessel formation was increased for BSMs and PRF in comparison to the native control (allogeneic: p = 0.046; alloplastic: p = 0.046; and xenogeneic: p = 0.050). An early enhancement of angiogenetic properties was demonstrated when combining BSMs with PRF in vitro and led to upregulated vessel formation in vivo. Thus, the use of BSMs in combination with PRF may trigger bony regeneration in clinical approaches.

Current and future trends in periodontal tissue engineering and bone regeneration

Periodontal tissue engineering involves a multi-disciplinary approach towards the regeneration of periodontal ligament, cementum and alveolar bone surrounding teeth, whereas bone regeneration specifically applies to ridge reconstruction in preparation for future implant placement, sinus floor augmentation and regeneration of peri-implant osseous defects. Successful periodontal regeneration is based on verifiable cementogenesis on the root surface, oblique insertion of periodontal ligament fibers and formation of new and vital supporting bone. Ultimately, regenerated periodontal and peri-implant support must be able to interface with surrounding host tissues in an integrated manner, withstand biomechanical forces resulting from mastication, and restore normal function and structure. Current regenerative approaches utilized in everyday clinical practice are mainly guided tissue/bone regeneration-based. Although these approaches have shown positive outcomes for small and medium-sized defects, predictability of clinical outcomes is heavily dependent on the defect morphology and clinical case selection. In many cases, it is still challenging to achieve predictable regenerative outcomes utilizing current approaches. Periodontal tissue engineering and bone regeneration (PTEBR) aims to improve the state of patient care by promoting reconstitution of damaged and lost tissues through the use of growth factors and signaling molecules, scaffolds, cells and gene therapy. The present narrative review discusses key advancements in PTEBR including current and future trends in preclinical and clinical research, as well as the potential for clinical translatability.

Biomimetic Aspects of Oral and Dentofacial Regeneration

Biomimetic materials for hard and soft tissues have advanced in the fields of tissue engineering and regenerative medicine in dentistry. To examine these recent advances, we searched Medline (OVID) with the key terms “biomimetics”, “biomaterials”, and “biomimicry” combined with MeSH terms for “dentistry” and limited the date of publication between 2010–2020. Over 500 articles were obtained under clinical trials, randomized clinical trials, metanalysis, and systematic reviews developed in the past 10 years in three major areas of dentistry: restorative, orofacial surgery, and periodontics. Clinical studies and systematic reviews along with hand-searched preclinical studies as potential therapies have been included. They support the proof-of-concept that novel treatments are in the pipeline towards ground-breaking clinical therapies for orofacial bone regeneration, tooth regeneration, repair of the oral mucosa, periodontal tissue engineering, and dental implants. Biomimicry enhances the clinical outcomes and calls for an interdisciplinary approach integrating medicine, bioengineering, biotechnology, and computational sciences to advance the current research to clinics. We conclude that dentistry has come a long way apropos of regenerative medicine; still, there are vast avenues to endeavour, seeking inspiration from other facets in biomedical research.

Evaluation of density, volume, height and rate of bone resorption of substitutes of autologous bone grafts for the repair of alveolar clefts in humans: A systematic review

Objective

To assess clinical studies that compare synthetic or enriched natural materials to autologous osseous grafts among individuals with cleft lip and palate to determine which would be the substitute to autologous bone graft for alveolar cleft repair in humans.

Materials and methods

Randomized and controlled clinical trials on alveolar clefts treated with synthetic bone substitutes and autogenous bone grafts combined with osteoinductive factors compared with autogenous bone grafts alone (with ≥4-month follow-up and reporting clinical/radiographic data) were considered eligible. MEDLINE, EMBASE, and Central databases were searched for articles published until February 2020.

Results

Of 73 eligible articles, 15 were included. Some inductive factors along with iliac crest bone decreased bone reabsorption, preserved the generated bone height/width, and reduced the required autologous bone graft volume. Bone morphogenetic protein (BMP2) as an autologous bone graft substitute, demonstrated satisfactory alveolar defect healing, by avoiding autograft use. Many materials did not yield better outcomes than did autologous grafts; however, hydroxyapatite and collagen complex, hydroxyapatite agarose composite gel, acellular dermal matrix film, fibrin glue, platelet-rich plasma, and deproteinized bovine bone showed similar bone healing outcomes, being an alternative alveolar defect treatment.

Conclusions

BMP2, as an osteoinductive factor along with a synthetic matrix, yields satisfactory bone healing and avoids the need for autologous bone grafts. However, high-quality RCTs are necessary to determine the most effective and safe concentration and protocol of BMP2 utilization as a substitute for the autologous iliac crest bone grafting.

Evaluation of Collagen Membranes Coated with Testosterone and Alendronate to Improve Guided Bone Regeneration in Mandibular Bone Defects in Minipigs

OBJECTIVES

The purpose of the present in vivo study was to evaluate whether pericard collagen membranes coated with ancillary amounts of testosterone and alendronate in a poly-lactic glycolic acid (PLGA) carrier as compared to uncoated membranes will improve early bone regeneration.

MATERIAL AND METHODS

In each of 16 minipigs, four standardized mandibular intraosseous defects were made bilaterally. The defects were filled with Bio-Oss^® granules and covered with a non-coated or coated membrane. Membranes were spray-coated with 4 layers of PLGA containing testosterone and alendronate resulting in 20, 50 or 125 μg/cm² of testosterone and 20 µg/cm² alendronate (F20, F50, F125). Non-coated membranes served as controls (F0). Animals were sacrificed at 6 and 12 weeks after treatment. Qualitative and quantitative histological evaluations of bone regeneration were performed. Differences between groups were assessed by paired Student's t-test.

RESULTS

Light microscopical analysis showed new bone formation that was in close contact with the Bio-Oss^® surface without an intervening non-mineralized tissue layer. Histomorphometric analysis of newly formed bone showed a significant 20% increase in area in the F125 coated membrane treated defects (40 [SD 10]%) compared to the F0 treated defects after 6 weeks (33 [SD 10]%, P = 0.013). At week 12, the total percentage of new bone was increased compared to week 6, but no increase in newly formed bone compared to F0 was observed.

CONCLUSIONS

The data from this in vivo study indicate that F125 collagen membranes coated with testosterone and alendronate resulted in superior bone formation (+24%) when normalized to control sites using uncoated membranes.

Aptamer-Functionalized Three-Dimensional Carbon Nanowebs for Ultrasensitive and Free-Standing PDGF Biosensor

Research on flexible biosensors is mostly focused on their use in obtaining information on physical signals (such as temperature, heart rate, pH, and intraocular pressure). Consequently, there are hardly any studies on using flexible electronics for detecting biomolecules and biomarkers that cause diseases. In this study, we propose a flexible, three-dimensional carbon nanoweb (3DCNW)-based aptamer sensor to detect the platelet-induced growth factor (PDGF), which is an oncogenic biomarker. As a template for the 3D structure, poly(acrylonitrile) (PAN) nanowebs were synthesized using a facile electrospinning process. The PAN nanowebs were then subjected to chemical vapor deposition with copper powder. This was followed by Cu etching to generate carbon protrusions on the web surface. As an active site, PDGF-B binding aptamer was introduced on the 3DCNW surface to form biosensor electrodes. The 3DCNW-based aptasensor exhibited excellent sensitivity (down to 1.78 fM), with high selectivity, reversibility, and stability to PDGF-BB.