Bi2WO6-BiOCl heterostructure with enhanced photocatalytic activity for efficient degradation of oxytetracycline

Synthesis of a 3D Flower-Like BiOCl/Bi-MOF Heterostructure for High-Performance Removal of Rhodamine B and Tetracycline Hydrochloride

Semiconductor materials based on bismuth metal have been extensively explored for their potential in photocatalytic applications owing to their distinctive crystal structure. Herein, we present the development of a hybrid photocatalyst, CAU-17/BiOCl, featuring a flower-like nanosheet morphology tailored for the photocatalytic degradation of organic contaminants such as rhodamine B (RhB) and tetracycline hydrochloride (TCH). The composite material is obtained by growing thin CAU-17 layers directly onto the host flower-like BiOCl nanosheets under solvothermal conditions. The optimized CAU-17/BiOCl composite possesses excellent photocatalytic performance, achieving a notable 96.0% removal rate for RhB and 78.4% for TCH after 60 and 90 min of LED light irradiation, respectively. This boosted activity is attributed to the heightened absorption of visible light caused by BiOCl and the provision of additional reaction sites due to the thin CAU-17 layers. Furthermore, the establishment of an S-scheme heterojunction mechanism enables efficient charge separation between CAU-17 and BiOCl, facilitating the separation of photoinduced electrons (e-) and holes (h+). Analysis of the degradation mechanism of RhB and TCH reveals the predominant role of superoxide radicals (•O2-), e-, and h+ in the photocatalytic degradation process. Moreover, the removal efficiency of TCH can reach approximately 64.5% after four cycles of recycling of CAU-17/BiOCl. Our work provides a facile, effective solution and a theoretically explained approach for the effective degradation of pollutants using heterojunction photocatalysts.

In Situ Interfacial Engineering of CeO2/Bi2WO6 Heterojunction with Improved Photodegradation of Tetracycline and Organic Dyes: Mechanism Insight and Toxicity Assessment

The construction of heterojunction photocatalysts is an auspicious approach for enhancing the photocatalytic performance of wastewater treatment. Here, a novel CeO2/Bi2WO6 heterojunction is synthesized using an in situ liquid-phase method. The optimal 15% CeO2/Bi2WO6 (CBW-15) is found to have the highest photocatalytic activity, achieving a degradation efficiency of 99.21% for tetracycline (TC), 98.43% for Rhodamine B (RhB), and 94.03% for methylene blue (MB). The TC removal rate remained at 95.38% even after five cycles. Through active species capture experiments, •O2 -, h+, and •OH are the main active substances for TC, RhB, and MB, respectively. The possible degradation pathways for TC are analyzed using liquid chromatography-mass spectrometry (LC-MS). The photoinduced charge transfer and possible degradation mechanisms are proposed through experimentation and density functional theory (DFT) calculations. Toxicity assessment experiments show a significant reduction in toxicity during the TC degradation process. This study uncovers the mechanism of photocatalytic degradation in CeO2/Bi2WO6 and provides new insights into toxicity assessment.

Boosting Photocatalytic Nitrogen Fixation via Nanoarchitectonics Using Oxygen Vacancy Regulation in W-Doped Bi2MoO6 Nanosheets

Ammonia and nitrates are key raw materials for various chemical and pharmaceutical industries. The conventional methods like Haber-Bosch and Ostwald methods used in the synthesis of ammonia and nitrates, respectively, result in harmful emission of gases. In recent years, the photocatalytic fixation of N2 into NH3 and nitrates has become a hot topic since it is a green and cost-effective approach. However, the simultaneous production of ammonia and nitrates has not been studied much. In this regard, we have synthesized W-doped Bi2MoO6 nanosheets in various molar ratios and demonstrated their potential as efficient photocatalysts for the simultaneous production of NH3 and NO3- ions under visible light irradiation. It was found that one of the catalysts (BMWO0.4) having an optimal molar ratio of doped tungsten showed the best photocatalytic NH3 production (56 μmol h-1) without using any sacrificial agents along with the simultaneous production of NO3- ions at a rate of 7 μmol h-1. The enhanced photocatalytic activity of the synthesized photocatalysts could be ascribed to oxygen vacancy defects caused by Mo substitution by a more electronegative W atom. Furthermore, density functional theory calculations verified the alteration in the band gap after doping of W atoms and also showed a strong chemisorption of N2 over the photocatalyst surface leading to its activation and thereby enhancing the photocatalytic activity. Thus, the present work provides insights into the effect of structural distortions on tailoring the efficiency of materials used in photocatalytic N2 fixation.

Novel Bi2WO6/MWCNT nanohybrids synthesis for high-performance photocatalytic activity of ciprofloxacin degradation under simulated sunlight irradiation

In this research, novel Bi2WO6/MWCNT nanohybrids were synthesized via a cost-effective hydrothermal route. The photocatalytic performance of these specimens was tested through the photodegradation of Ciprofloxacin (CIP) under simulated sunlight. Various physicochemical techniques systematically characterized the prepared pure, Bi2WO6/MWCNT nanohybrid photocatalysts. The XRD and Raman spectra revealed the structural/phase properties of Bi2WO6/MWCNT nanohybrids. FESEM and TEM pictures revealed the attachment and distribution of plate-like Bi2WO6 nanoparticles along the nanotubes. The optical absorption and bandgap energy of Bi2WO6 was affected by the addition of MWCNT, which was analyzed by UV-DRS spectroscopy. The introduction of MWCNT reduces the bandgap value of Bi2WO6 from 2.76 to 2.46 eV. The BWM-10 nanohybrid showed superior photocatalytic activity for CIP photodegradation; 91.3% of CIP was degraded under sunlight irradiation. The PL and transient photocurrent test confirm that photoinduced charge separation efficiency is better in BWM-10 nanohybrids. The scavenger test indicates that h+ & •O2 have mainly contributed to the CIP degradation process. Furthermore, the BWM-10 catalyst demonstrated outstanding reusability and firmness in four successive cycles. It is anticipated that the Bi2WO6/MWCNT nanohybrids will be employed as photocatalysts for environmental remediation and energy conversion. This research presents a novel technique for developing an effective photocatalyst for pollutant degradation.

Degradation of ciprofloxacin by persulfate activated by Fe(III)-doped BiOCl composite photocatalyst

Fe-BOC-X photocatalyst was successfully prepared by solvothermal method. The photocatalytic activity of Fe-BOC-X was determined by ciprofloxacin (CIP), a typical fluoroquinolone antibiotic. Under sunlight irradiation, all Fe-BOC-X showed better CIP removal performance than original BiOCl. In comparison, the photocatalyst with iron content of 50 wt% (Fe-BOC-3) has excellent structural stability and the best adsorption photodegradation efficiency. The removal rate of CIP (10 mg/L) by Fe-BOC-3 (0.6 g/L) reached 81.4% within 90 min. At the same time, the effects of photocatalyst dosage, pH, persulfate, persulfate concentration, and combinations of different systems (PS, Fe-BOC-3, Vis/PS, Vis/Fe-BOC-3, Fe-BOC-3/PS, and Vis/Fe-BOC-3/PS) on the reaction were systematically discussed. In reactive species trapping experiments, electron spin resonance (ESR) signals revealed that the photogenerated holes (h+), hydroxyl radical (•OH), sulfate radical (•SO4-), and superoxide radical (•O2-) played an important role in CIP degradation; hydroxyl radicals (•OH) and sulfate radicals (•SO4-) play a major role. Various characterization methods have demonstrated that Fe-BOC-X has larger specific surface area and pore volume than original BiOCl. UV-vis DRS indicate that Fe-BOC-X has wider visible light absorption and faster photocarrier transfer and provides abundant surface oxygen absorption sites for effective molecular oxygen activation. Accordingly, a large number of active species were produced and participated in the photocatalytic process, thus effectively promoting the degradation of ciprofloxacin. Based on HPLC-MS analysis, two possible decomposition pathways of CIP were finally proposed. The main degradation pathways of CIP are mainly due to the high electron density of piperazine ring in CIP molecule, which is mainly attacked by various free radicals. The main reactions include piperazine ring opening, decarbonylation, decarboxylation, and fluorine substitution. This study can better open up a new way for the design of visible light driven photocatalyst and provide more ideas for the removal of CIP in water environment.

Solar-driven hybrid photo-Fenton degradation of persistent antibiotic ciprofloxacin by zinc ferrite-titania heterostructures: degradation pathway, intermediates, and toxicity analysis

Present work puts forward an efficient strategy to degrade one of the persistent antibiotic contaminants, ciprofloxacin (CIP). Hybrid advanced oxidation process (HAOP) is tailored with a synergy effect between photocatalysis and photo-Fenton catalysis on zinc ferrite-titania heterostructured composite (ZFO-TiO₂). The ZFO-TiO₂ heterostructured composite enables heterogenous surfaces for enhanced charge separation where HAOP is implemented for CIP degradation with the aid of class AAA solar simulator. The results reveal an enhanced degradation rate of CIP (k_obs = 0.255 min^-1), noticeably higher than the conventional TiO₂-based photocatalysis. The HAOP system strongly enhances the reaction rates showing five times higher performance as compared to TiO₂-based photocatalysis. The substitution reactions for degradation of CIP into its intermediates were analyzed by LC-MS/MS, and the plausible degradation pathways have been graphically modeled identifying 3-phenyl-1-propanol and phenol molecules as less toxic end products. Toxicity of the photodegraded samples reveal 18.1 ± 1.24% inhibition of V. fischeri at the end of 60-min treatment indicating reduced toxicity of CIP contaminated samples. Antimicrobial inhibition studies on E. coli also corroborate an effective CIP removal (~ 100%) in less than 90 min. The study puts forward a novel ZFO-TiO₂ composite HAOP system for efficient and rapid mineralization of an antibiotic pollutant, extendable towards wide range of pharmaceutical drug degradation studies.

Controlling the Photocatalytic Activity and Benzylamine Photooxidation Selectivity of Bi2WO6 via Ion Substitution: Effects of Electronegativity

Doping or ion substitution is often used as an effective strategy to improve photocatalytic activities of several semiconductors. Most frequently, the dopants provide extra states to increase light absorption, alter the electronic structure, or lower the carrier recombination. This work focuses on ion substitution in Bi₂WO₆, where the dopants modify band-edge potentials of the catalysts. Specifically, we investigate how the electronegativity (EN) of the dopant could be used to tune the band-edge potentials and how such changes influence the photocatalytic mechanism. Compared to Te that has a lower EN, I lowers the band-edge potentials. While substitutions with both ions enhance Rh B photodegradation and benzylamine photooxidation, the modified band potentials of I-doped Bi₂WO₆ influence the benzylamine photooxidation pathway, resulting in higher selectivity. Additionally, substitution of I⁷⁺ in the Bi₂WO₆ lattice improves the morphologies, decreases the band-gap energy, and reduces the carrier recombination. As a result, I-doped Bi₂WO₆ shows almost 3 times higher %conversion while maintaining 100% selectivity in the oxidative coupling of benzylamine. The findings here signify the importance of the choices of dopants on the photocatalytic reactions and would benefit the design of other related materials for such applications.

Green-engineered synthesis of Bi2Zr2O7 NPs: excellent performance on electrochemical sensor and sunlight-driven photocatalytic studies

In this rapid growing eco-friendly research world, synthesis of non-toxic, highly effective photocatalyst for potential applications is necessary. Herein, a strong ability Bi2Zr2O7 nanoparticle (BZO NP) with pyrochlore structure was fabricated by solution combustion synthesis using green (Mentha spicata) and chemical (Glycine) fuels. The X-ray diffraction analysis confirms the formation of pure phase for synthesized BZO NP using pudina extract (BZOP NP) compared to BZO NP using Glycine fuel (BZOG NP). The lower energy band gap of synthesized BZOP NP was observed than BZOG NP and its values were found to be 2.26 and 2.49 eV measured by UV-visible absorbance spectral technique. The morphological analysis of pores and voids formation as examined by scanning electron microscopy (SEM) technique. The synthesized BZOP NP shows excellent photocatalytic activity for degradation of three different dyes under sunlight irradiation for about 150 min with 97.9% for Rose Bengal (RB) dye with lower charge transfer resistance (Rct) value. For the very first time, the synthesized NPs can be utilized as supercapacitor with good specific capacitance (SPCcv) value of 14.3 F/g and SPCGD (12.5 F/g) for BZOP compared to BZOG indicating pseudocapacitance nature. The synthesized nanoparticles (NPs) can sense lead nitrate and dextrose at concentration 1-5 mM in the potential range of - 1.0 to + 1.0 V. Accordingly, the reduction potential peak at - 0.25 V and oxidation potential peak found at - 0.82 V confirms the presence of lead content and presence of additional potential peaks at - 0.37 V and - 0.71 V for detection of dextrose biochemical. Recyclability experiment showed the retainment of photocatalytic activity up to five cycles indicating the photostability.

Morphological and elemental tuning of BiOCl/BiVO4 heterostructure for uric acid electrochemical sensor and antibiotic photocatalytic degradation

Deep eutectic solvents (DES) consisting of EG-(ChCl: C₂H₆O₂) and TU-(ChCl: CH₄N₂S) assisted synthesized BiOCl/BiVO₄ heterostructured catalyst studied for electrochemical uric acid (UA) sensor and tetracycline photocatalytic degradation. The chemical composition of the BiOCl/BiVO₄ catalyst was analyzed by X-ray photoelectron spectroscopy (XPS). UV-vis spectroscopy reveals increased absorption of visible light till the near-infrared region, which results in a narrowing of band gap energy from 2.3 eV to 2.2 eV for BiOCl/BiVO₄-TU. Morphology of catalyst analyzed using field-emission scanning electron microscope (FE-SEM) and Transmission electron microscope (TEM) technique. Time-Resolved photoluminescence (TRPL) confirms an increased lifetime of e^-/h⁺ pair after heterostructure formation. The catalyst-modified glassy carbon electrode shows selectivity toward the detection of uric acid (UA). The limit of detection (LOD) is estimated to be 0.04688 μM for UA; also, interference and stability of catalyst were studied. Photocatalytic activity of the synthesized catalyst was investigated by degrading tetracycline (TC) antibiotic pollutants, and their intermediate product was analyzed by ion trap mass spectrometry (MS).

Advances in Bi2WO6-Based Photocatalysts for Degradation of Organic Pollutants

With the rapid development of modern industries, water pollution has become an urgent problem that endangers the health of human and wild animals. The photocatalysis technique is considered an environmentally friendly strategy for removing organic pollutants in wastewater. As an important member of Bi-series semiconductors, Bi₂WO₆ is widely used for fabricating high-performance photocatalysts. In this review, the recent advances of Bi₂WO₆-based photocatalysts are summarized. First, the controllable synthesis, surface modification and heteroatom doping of Bi₂WO₆ are introduced. In the respect of Bi₂WO₆-based composites, existing Bi₂WO₆-containing binary composites are classified into six types, including Bi₂WO₆/carbon or MOF composite, Bi₂WO₆/g-C₃N₄ composite, Bi₂WO₆/metal oxides composite, Bi₂WO₆/metal sulfides composite, Bi₂WO₆/Bi-series composite, and Bi₂WO₆/metal tungstates composite. Bi₂WO₆-based ternary composites are classified into four types, including Bi₂WO₆/g-C₃N₄/X, Bi₂WO₆/carbon/X, Bi₂WO₆/Au or Ag-based materials/X, and Bi₂WO₆/Bi-series semiconductors/X. The design, microstructure, and photocatalytic performance of Bi₂WO₆-based binary and ternary composites are highlighted. Finally, aimed at the existing problems in Bi₂WO₆-based photocatalysts, some solutions and promising research trends are proposed that would provide theoretical and practical guidelines for developing high-performance Bi₂WO₆-based photocatalysts.

Rapid fabrication of MgO@g-C3N4 heterojunctions for photocatalytic nitric oxide removal

Nitric oxide (NO) is an air pollutant impacting the environment, human health, and other biotas. Among the technologies to treat NO pollution, photocatalytic oxidation under visible light is considered an effective means. This study describes photocatalytic oxidation to degrade NO under visible light with the support of a photocatalyst. MgO@g-C₃N₄ heterojunction photocatalysts were synthesized by one-step pyrolysis of MgO and urea at 550 °C for two hours. The photocatalytic NO removal efficiency of the MgO@g-C₃N₄ heterojunctions was significantly improved and reached a maximum value of 75.4% under visible light irradiation. Differential reflectance spectroscopy (DRS) was used to determine the optical properties and bandgap energies of the material. The bandgap of the material decreases with increasing amounts of MgO. The photoluminescence spectra indicate that the recombination of electron-hole pairs is hindered by doping MgO onto g-C₃N₄. Also, NO conversion, DeNOx index, apparent quantum efficiency, trapping tests, and electron spin resonance measurements were carried out to understand the photocatalytic mechanism of the materials. The high reusability of the MgO@g-C₃N₄ heterojunction was shown by a five-cycle recycling test. This study provides a simple way to synthesize photocatalytic heterojunction materials with high reusability and the potential of heterojunction photocatalysts in the field of environmental remediation.

The strategy for organic dye and antibiotic photocatalytic removal for water remediation in an example of Co-SnO2 nanoparticles

A challenging problem to create an efficient photocatalyst suitable for industrial water remediation, aiming to remove cyclic organic compounds attracts increasing attention. The current study aimed to clarify a few "dark spots" in the field, namely to find out if it is possible to make an efficient photocatalyst activated with visible light by using a simple and cheap strategy and what are the key factor impacting its efficiency. In this work, a new procedure to obtain spherical nanoparticles with the same average size but different amounts of oxygen vacancies and defects and dopant concentrations was developed. The approach based on hydrothermal treatment was suggested to obtain rod-shaped nanoparticles. The systematic study of photocatalytic behavior on the example of oxytetracycline and methylene blue degradation under visible light of widely available LED lamp was performed. Based on chemical and computational experiments the main factor affecting the process efficiency was determined.

Bismuth Oxyhalide-Based Materials (BiOX: X = Cl, Br, I) and Their Application in Photoelectrocatalytic Degradation of Organic Pollutants in Water: A Review

An important target of photoelectrocatalysis (PEC) technology is the development of semiconductor-based photoelectrodes capable of absorbing solar energy (visible light) and promoting oxidation and reduction reactions. Bismuth oxyhalide-based materials BiOX (X = Cl, Br, and I) meet these requirements. Their crystalline structure, optical and electronic properties, and photocatalytic activity under visible light mean that these materials can be coupled to other semiconductors to develop novel heterostructures for photoelectrochemical degradation systems. This review provides a general overview of controlled BiOX powder synthesis methods, and discusses the optical and structural features of BiOX-based materials, focusing on heterojunction photoanodes. In addition, it summarizes the most recent applications in this field, particularly photoelectrochemical performance, experimental conditions and degradation efficiencies reported for some organic pollutants (e.g., pharmaceuticals, organic dyes, phenolic derivatives, etc.). Finally, as this review seeks to serve as a guide for the characteristics and various properties of these interesting semiconductors, it discusses future PEC-related challenges to explore.

Visible-light-driven indium vanadium oxide nanosheets supported bismuth tungsten oxide nanoflakes heterostructure as an efficient photocatalyst for the tetracycline degradation

The development of excellent photocatalysts is of great significance for the efficient photocatalytic degradation process, however, the low carrier separation efficiency and poor light absorption ability typically limit the performance of photocatalysts. Herein, a visible light responsive heterostructure composed with indium vanadium oxide nanosheets supported bismuth tungsten oxide nanoflakes (InVO₄/Bi₂WO₆) was synthetized through in-situ hydrothermal method. Further, the photocatalytic activity was performed for tetracycline (TC) under visible light illumination. The InVO₄/Bi₂WO₆ heterostructure builds a strong interface between InVO₄ and Bi₂WO₆ to hinder reunion of photoinduced charge carriers, and provides the sensitive agents for the removal of TC. In particular, the InVO₄/Bi₂WO₆ photocatalyst prepared by taking 5.0 mg of Bi₂WO₆ shows the highest degradation of TC about 97.42% in 72 min. The quenching experiments identified that hydroxyl radicals, and holes dominated in the photocatalytic process. Furthermore, the optimized nanocomposite is stable even after four cycles, which exposes the excellent photostability and reusability of the photocatalyst. In addition, a plausible degradation pathway and mechanism of TC over InVO₄/Bi₂WO₆ nanocomposite is also projected.

Influence of oxygen vacancy defects on Aurivillius phase layered perovskite oxides of bismuth towards photocatalytic environmental remediation

The low light absorption and rapid recombination of photogenerated charge carriers are primary contributors to the low activity of various photocatalysts. Fabrication of oxygen vacancy defect-rich materials for improved photocatalytic activities has been attracting tremendous attention from researchers all over the world. In this work, we have compared the photocatalytic activities of oxygen vacancy-rich Bi₂MoO₆(BMO-O_V) and Bi₂WO₆(BWO-O_V) for the degradation of a model pharmaceutical pollutant, ciprofloxacin under visible light irradiation. The photocatalytic activity was increased from 47% to 77% and 40% to-67% for BMO-O_Vand BWO-O_V, respectively in comparison to pristine oxides. This enhancement can be ascribed to suppressed charge carrier recombination and increased surface active sites. In addition, scavenger studies have been done to explain the role of photoinduced charge carriers in the degradation mechanism. Moreover, oxygen vacancy-rich photocatalysts have remained stable even after three consecutive cycles, making them promising materials for practical applications. Overall, this work provides deeper insight into the design and development of oxygen vacancy-rich materials.

Lignin-Supported Heterogeneous Photocatalyst for the Direct Generation of H2O2 from Seawater

The development of smart and sustainable photocatalysts is in high priority for the synthesis of H₂O₂ because the global demand for H₂O₂ is sharply rising. Currently, the global market share for H₂O₂ is around 4 billion US$ and is expected to grow by about 5.2 billion US$ by 2026. Traditional synthesis of H₂O₂ via the anthraquinone method is associated with the generation of substantial chemical waste as well as the requirement of a high energy input. In this respect, the oxidative transformation of pure water is a sustainable solution to meet the global demand. In fact, several photocatalysts have been developed to achieve this chemistry. However, 97% of the water on our planet is seawater, and it contains 3.0-5.0% of salts. The presence of salts in water deactivates the existing photocatalysts, and therefore, the existing photocatalysts have rarely shown reactivity toward seawater. Considering this, a sustainable heterogeneous photocatalyst, derived from hydrolysis lignin, has been developed, showing an excellent reactivity toward generating H₂O₂ directly from seawater under air. In fact, in the presence of this catalyst, we have been able to achieve 4085 μM of H₂O₂. Expediently, the catalyst has shown longer durability and can be recycled more than five times to generate H₂O₂ from seawater. Finally, full characterizations of this smart photocatalyst and a detailed mechanism have been proposed on the basis of the experimental evidence and multiscale/level calculations.

Construction of a flower-like S-scheme Bi2WO6/BiOCl nano-heterojunction with enhanced visible-light photocatalytic properties

A series of flower-like Bi2WO6/BiOCl photocatalyst were synthesized by a facile hydrothermal method. S-scheme Bi2WO6/BiOCl-3 nano-heterojunction exhibits the excellent photocatalytic activity for degradation of RhB under visible light irradiation.

Preparation of BiOCl/Bi2WO6 Photocatalyst for Efficient Fixation on Cotton Fabric: Applications in UV Shielding and Self-Cleaning Performances

In this work, a visible-light-driven BiOCl/Bi2WO6 photocatalyst was obtained via a facile hydrothermal method and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive spectrometry (EDS), X-ray photoelectron spectroscopy (XPS), ultraviolet/visible light diffuse reflection spectroscopy (UV/Vis), and photocurrent (PC). BiOCl/Bi2WO6 was modified with (3-chloro-2-hydroxypropyl) trimethyl ammonium chloride to obtain the cationized BiOCl/Bi2WO6. Cotton fabric was pretreated with sodium hydroxide (NaOH) and sodium chloroacetate solution to obtain carboxymethylated cotton fabric, which was further reacted with cationized BiOCl/Bi2WO6 to achieve finished cotton fabric. The cotton fabrics were characterized by Fourier-transform infrared spectroscopy (FT-IR), XRD, SEM, and EDS. The photocatalytic activity of the BiOCl/Bi2WO6 photocatalyst and cotton fabrics was assessed by photocatalytic degradation of MB (methylene blue) solution under simulated visible light. The self-cleaning property of cotton fabrics was evaluated by removing MB solution and red-wine stains. Results revealed that the coated cotton fabrics exhibited appreciable photocatalytic and self-cleaning performance. In addition, anti-UV studies showed that the finished cotton fabrics had remarkable UV blocking properties in the UVA and UVB regions. Therefore, the finished cotton fabric with BiOCl/Bi2WO6 can provide a framework for the development of multifunctional textiles.

Recent advances in degradation of pharmaceuticals using Bi2WO6 mediated photocatalysis - A comprehensive review

The pollution of water bodies by residual pharmaceuticals is a major problem globally. Bismuth tungstate mediated photocatalysis has been effective in the removal of these organics from water. Bismuth tungstate (Bi₂WO₆) has proven to be an excellent visible light active photocatalyst because of its non-toxicity, low band gap energy and ease of preparation. It has been widely applied for the removal of a wide array of organic pollutants, particularly dyes, from wastewater. However, recently, much attention has been channelled to its application for the degradation of pharmaceuticals. In this present review, the recent trends in the applications of Bi₂WO₆ based photocatalysts for the removal of pharmaceuticals in wastewater are comprehensively discussed. The fabrication of Bi₂WO₆ based photocatalysts with enhanced photocatalytic performances through morphology control, doping and formation of heterojunctions are highlighted. Much discussion centres on the mechanisms and possible degradation pathways of antibiotic pharmaceuticals in wastewater. Finally, areas needing more attention and investigation on the use of Bi₂WO₆ based photocatalysts for removal of pharmaceuticals from wastewater especially towards real-life applications are presented for future research directions.