Green synthesis of magnesium nanoparticles mediated from Rosa floribunda charisma extract and its antioxidant, antiaging and antibiofilm activities

Synthesis of Berberis aristate rhizome extract stabilized magnesium nanoparticles using green chemistry: rhizome characterization, in vitro antimicrobial and anti-inflammatory activity

In the present study, magnesium nanoparticles (Mg NPs) were synthesized utilizing an aqueous extract of Berberis aristate rhizome and evaluated for antimicrobial and anti-inflammatory activity. Technofunctional properties of rhizome powder were evaluated and during thermal stability evaluation four stages of decomposition with a maximum delta Y value of 76.04 % was observed. Optimization of Mg NPs was carried out by employing eight different concentrations (C1-C8)   and the C4 showed maximum absorbance at 330 nm confirming the NPs synthesis. The Mg NPs showed the particle size of 62 nm, zeta potential of -24.7 mV and hexagonal mprphology. Potential inhibition against S. aureus and E. coli (76.78 ± 0.05% and 74.62 ± 0.17%)and anti-inflammatory activity ranging from 42.43 ± 0.07-82.92 ± 0.04% was observed for Mg NPs. Therefore, green synthesis of Mg NPs is a promising approach for the development ofbiological active NPs to cure microbial infections.

Insights into the role of mesenchymal stem cells in cutaneous medical aesthetics: from basics to clinics

With the development of the economy and the increasing prevalence of skin problems, cutaneous medical aesthetics are gaining more and more attention. Skin disorders like poor wound healing, aging, and pigmentation have an impact not only on appearance but also on patients with physical and psychological issues, and even impose a significant financial burden on families and society. However, due to the complexities of its occurrence, present treatment options cannot produce optimal outcomes, indicating a dire need for new and effective treatments. Mesenchymal stem cells (MSCs) and their secretomics treatment is a new regenerative medicine therapy that promotes and regulates endogenous stem cell populations and/or replenishes cell pools to achieve tissue homeostasis and regeneration. It has demonstrated remarkable advantages in several skin-related in vivo and in vitro investigations, aiding in the improvement of skin conditions and the promotion of skin aesthetics. As a result, this review gives a complete description of recent scientific breakthroughs in MSCs for skin aesthetics and the limitations of their clinical applications, aiming to provide new ideas for future research and clinical transformation.

Effect of Ducrosia anethifolia methanol extract against methicillin resistant Staphylococcus aureus and Pseudomonas aeruginosa biofilms on excision wound in diabetic mice

Background

Ducrosia anethifolia is an aromatic desert plant used in Saudi folk medicine to treat skin infections. It is widely found in Middle Eastern countries.

Methods

A methanolic extract of the plant was prepared, and its phytoconstituents were determined using LC-MS. In-vitro and in-vivo antibacterial and antibiofilm activities of the methanolic extract were evaluated against multidrug-resistant bacteria. The cytotoxic effect was assessed using HaCaT cell lines in-vitro. Diabetic mice were used to study the in-vivo antibiofilm and wound healing activity using the excision wound method.

Results

More than 50 phytoconstituents were found in the extract after LC-MS analysis. The extract exhibited antibacterial activity against both the tested pathogens. The extract was free of irritant effects on mice skin, and no cytotoxicity was observed on HaCaT cells with an IC50 value of 1381 µg/ml. The ointment formulation of the extract increased the healing of diabetic wounds. The microbial load of both pathogens in the wounded tissue was also reduced after the treatment. The extract was more effective against methicillin-resistant Staphylococcus aureus (MRSA) than MDR-P. aeruginosa in both in vitro and in vivo experiments. Further, skin regeneration was also observed in histological studies.

Conclusions

The results showed that D. anethifolia methanol extract supports wound healing in infected wounds in diabetic mice through antibacterial, antibiofilm, and wound healing activities.

Co-applied magnesium nanoparticles and biochar modulate salinity stress via regulating yield, biochemical attribute, and fatty acid profile of Physalis alkekengi L

While previous studies have addressed the desirable effects of biochar (BC) or magnesium nanoparticles (Mg NPs) on salinity stress individually, there is a research gap regarding their simultaneous application. Additionally, the specific mechanisms underlying the effects of BC and Mg NPs on salinity in Physalis alkekengi L. remain unclear. This study aimed to investigate the synergistic effects of BC and Mg NPs on P. alkekengi L. under salinity stress conditions. A pot experiment was conducted with salinity at 100 and 200 mM sodium chloride (NaCl), as well as soil applied BC (4% v/v) and foliar applied Mg NPs (500 mg L-1) on physiological and biochemical properties of P. alkekengi L. The results represented that salinity, particularly 200 mM NaCl, significantly reduced plant yield (58%) and total chlorophyll (Chl, 36%), but increased superoxide dismutase (SOD, 82%) and catalase (CAT, 159%) activity relative to non-saline conditions. However, the co-application of BC and Mg NPs mitigated these negative effects and improved fruit yield, Chl, anthocyanin, and ascorbic acid. It also decreased the activity of antioxidant enzymes. Salinity also altered the fatty acid composition, increasing saturated fatty acids (SFAs) and polyunsaturated fatty acids (PUFAs), while decreasing monounsaturated fatty acids (MUFAs). The heat map analysis showed that fruit yield, anthocyanin, Chl, and CAT were sensitive to salinity. The findings can provide insights into the possibility of these amendments as sustainable strategies to mitigate salt stress and enhance plant productivity in affected areas.

Green synthesis, characterization and applications of Phyllanthus emblica fruit extract mediated chromium oxide nanoparticles

The green synthesis of metallic nanoparticles is attributable towards diverse applications in various fields, recently. In this research, we report simple and eco-friendly synthesis of chromium oxide (Cr2O3) nanoparticles using the fruit extract of Phyllanthus emblica as a reducing and capping agent. The absorbance peaks at 350 nm and 450 nm validated the nanoparticle formation in UV-visible spectrum. FTIR spectrum revealed the nature of functional groups. The crystalline properties of nanoparticles were ascertained by XRD analysis. EDX spectrum corroborated the elemental composition of nanoparticles in which chromium and oxygen constituted 68% of total weight. SEM images demonstrated agglomeration of nanoparticles resulting in the formation of large irregularly shaped flakes. Cr2O3 nanoparticles demonstrated excellent antimicrobial properties against 11 bacterial isolates and 1 fungal isolate. The largest inhibition zone (53 mm) was measured against A. baumannii while the smallest inhibition zone (26 mm) was recorded against S. aureus. Minimum inhibitory concentration (MIC) values were < 1 µg/ml for all microbes. However, the synthesized nanoparticles did not reveal synergism with any of the selected antibiotics (FICI values > 1). Nanoparticles possessed potent anti-biofilm powers with maximum (77%) inhibition of E. coli biofilms and minimum (45%) inhibition of S. enterica biofilms. Photocatalytic activity of Cr2O3 nanoparticles was evaluated to determine their efficacy in environmental bioremediation. Outcomes demonstrated degradation of methyl red (84%) but not of methylene blue dye. Furthermore, the Cr2O3 nanoparticles displayed considerable antioxidant (43%) as well as anti-inflammatory (44%) potentials. Hence, the present study accounts for the versatile applications of P. emblica-mediated Cr2O3 nanoparticles which could be pursued for future biomedical and environmental applications.

Bio-fabrication of silver nanoparticles using Commelina erecta, L.: a mechanistic approach on synthesis, optimization, antibacterial, and antioxidant potential

The ongoing exploration of economical, sustainable, and environment-friendly methods for synthesizing monodisperse colloidal metal nanoparticles is growing day by day due to their potential application in various fields. The use of plant derivatives in nanoparticle synthesis and their suitability as sustainable catalysts have emerged as significant areas of research. In this study, silver nanoparticles were synthesized using an aqueous extract obtained from the commonly found weed Commelina erecta, L. Extensive study is conducted to optimize various synthesis parameters such as pH, reducing agent concentration, silver nitrate concentration, and temperature. The plant extract utilized in the synthesis process contained variety of antioxidants, including malic acid, phenol, benzoic acid, and catechol, which played a crucial role in both reduction and capping during the synthesis process, thereby making them suitable for biomedical applications. The optimized synthesis process yielded silver nanoparticles with a particle size of 16.2 ± 3.1 nm. These nanoparticles exhibited excellent stability and demonstrated remarkable antibacterial activity compared to the standard antibacterial agent, streptomycin. In addition, the silver nanoparticles displayed promising antioxidant activity attributed to the presence of antioxidant functional groups on their surface. This study reports, for the first time, the synthesis of silver nanoparticles using antioxidant compounds present in C. erecta, L. plant extract. The antioxidant compounds identified through GC-MS belong to phenols, phenolic acids, and carboxylic acid groups. Furthermore, the exceptional antimicrobial and antioxidant properties exhibited by the synthesized silver nanoparticles offer new possibilities for their potential applications.

Nanotechnology-Based Approaches for Cosmeceutical and Skin Care: A Systematic Review

Cosmeceuticals have gained great importance and are among the top-selling products used for skin care. Because of changing lifestyles, climate, and increasing pollution, cosmeceuticals are utilized by every individual, thereby making cosmeceuticals a fruitful field for research and the economy. Cosmeceuticals provide incredibly pleasing aesthetic results by fusing the qualities of both cosmetics and medicinal substances. Cosmeceuticals are primarily utilized to improve the appearance of skin by making it smoother, moisturized, and wrinkle-free, in addition to treating dermatological conditions, including photoaging, burns, dandruff, acne, eczema, and erythema. Nanocosmeceuticals are cosmetic products that combine therapeutic effects utilizing nanotechnology, allowing for more precise and effective target-specific delivery of active ingredients, and improving bioavailability.

Sweroside: An iridoid glycoside of potential neuroprotective, antidiabetic, and antioxidant activities supported by molecular docking

Oxidative stress can be a series burden on human health and may lead to many chronic diseases such as diabetes and neurological disorders. The use of natural products to scavenge the reactive oxygen species has attracted the attention of many researchers, to safely manage these conditions with fewer side effects, in available and cost-effective ways. The current study aimed at the isolation and structure elucidation of sweroside from Schenkia spicata (Gentianaceae) and the evaluation of its antioxidant, antidiabetic, neuroprotective, and enzyme inhibitory potential via in vitro and in silico studies. The antioxidant potential was evaluated by a variety of assays as ABTS, CUPRAC and FRAP, showing values of 0.34 ± 0.08, 21.14 ± 0.43, and 12.32 ± 0.20 mg TE/g, respectively, while demonstrating 0.75 ± 0.03 mmol TE/g for phosphomolybdenum (PBD) assay. Acetylcholinestrase (AChE), butyrylcholinesterase (BChE) and tyrosinase inhibitory activities were used to evaluate the neuroprotective effect, while the antidiabetic potential was evaluated by measuring α-amylase and glucosidase inhibitory activities. Results revealed that sweroside showed antioxidant and inhibitory effects on the enzymes tested with the exception of AChE. It demonstrated good tyrosinase inhibitory ability with 55.06 ± 1.85 mg Kojic acid equivalent /g. Regarding the antidiabetic ability, the compound displayed both amylase and glucosidase (0.10 ± 0.01 and 1.54 ± 0.01 mmol Acarbose equivalent/g, respectively) inhibitory activities. Molecular docking studies of sweroside on the active sites of the aforementioned enzymes in addition to NADPH oxidase were performed using Discovery Studio 4.1 software. Results revealed good binding affinities of sweroside to these enzymes mainly through hydrogen bonds and van der Waals interactions. Sweroside can be an important antioxidant and enzyme inhibitory supplement, yet further in vivo and clinical studies are required.

Antioxidant and anti-Alzheimer activities of Clivia miniata (Lindl) roots, bulbs, and aerial parts: In-vitro and in-silico studies

Clivia miniata (Lindl) is a member of the family Amaryllidaceae known for its chemically diverse alkaloids with a wide range of biological activities. Many reports revealed a direct role of oxidative stress in the early stage of Alzheimer's disease (AD). Meanwhile, β-site amyloid precursor protein cleavage enzyme 1 (BACE-1) is a molecular target for the treatment of AD. We aimed to investigate C. miniata root, bulb, and aerial part chemical profiling, antioxidant, BACE-1, and AChE enzyme inhibitory activities. Results showed that the total root had the most potent radical scavenging activity as compared to the total bulb and aerial part, respectively. Ethanol root extract had the most potent BACE-1 inhibitory activity (IC50 = 0.02 ± 0.001 µg/mL) as compared to the bulb and aerial part (IC50 = 0.93 ± 0.13, 1.80 ± 0.24 µg/mL), respectively. Moreover, the total root extract mitigated AChE enzyme activity more than total bulb and aerial fractions with IC50 values of (0.06 ± 0.02, 0.58 ± 0.3, and 1.89 ± 0.42 µg/mL, respectively. Bioassay-guided acid-base fractionation confirmed superior BACE-1 inhibitory activity of the root fractions particularly, methylene chloride and ethyl acetate fractions with (IC50 values of 0.21 ± 0.60 and 0.01 ± 0.001 µg/mL), respectively. UPLC-MS analysis of ethyl acetate and methylene chloride fractions of C. miniata root led to the identification of eight phenolics and thirteen alkaloids, respectively. Molecular docking studies against BACE-1 protein revealed that lycorine di-hexoside, miniatine, and cliviaaline were the most promising hits. Further investigation of anti-AD potential of the aforementioned small molecules is required.

Green Synthesis of Metal and Metal Oxide Nanoparticles: A Review of the Principles and Biomedical Applications

In recent years, interest in nanotechnology has increased exponentially due to enhanced progress and technological innovation. In tissue engineering, the development of metallic nanoparticles has been amplified, especially due to their antibacterial properties. Another important characteristic of metal NPs is that they enable high control over the features of the developed scaffolds (optimizing their mechanical strength and offering the controlled release of bioactive agents). Currently, the main concern related to the method of synthesis of metal oxide NPs is the environmental impact. The physical and chemical synthesis uses toxic agents that could generate hazards or exert carcinogenicity/environmental toxicity. Therefore, a greener, cleaner, and more reliable approach is needed. Green synthetic has come as a solution to counter the aforementioned limitations. Nowadays, green synthesis is preferred because it leads to the prevention/minimization of waste, the reduction of derivatives/pollution, and the use of non-toxic (safer) solvents. This method not only uses biomass sources as reducing agents for metal salts. The biomolecules also cover the synthesized NPs or act as in situ capping and reducing agents. Further, their involvement in the formation process reduces toxicity, prevents nanoparticle agglomeration, and improves the antimicrobial activity of the nanomaterial, leading to a possible synergistic effect. This study aims to provide a comprehensive review of the green synthesis of metal and metal oxide nanoparticles, from the synthesis routes, selected solvents, and parameters to their latest application in the biomedical field.

HPLC-ESI/MS-MS characterization of compounds in Dolomiaea costus extract and evaluation of cytotoxic and antiviral properties: molecular mechanisms underlying apoptosis-inducing effect on breast cancer

BACKGROUND

Dolomiaea costus (syn: Saussurea costus; Family Asteraceae) occupies an important place in the traditional Chinese medicinal plants and is prescribed for a wide range of disorders. The current study aimed to tentatively identify the phytoconstituents of D. costus extract and to explore antiproliferative activity against human breast cancer cells and its possible apoptotic mechanism along with antiviral activity against human adenovirus 5 (Adv-5).

METHODS

The phytoconstituents of 70% ethanol extract of D. costus were assessed using HPLC/ESI-MS/MS technique. The cell viability was investigated against breast cancer cell line (MCF-7) via 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. Mechanistically, the apoptotic effects on the Bax, Bcl2 and Caspase 3 were determined via quantitative reverse transcriptase-polymerase chain reaction (RT-qPCR). Further, the antiviral activity was assessed against Adv-5 based on virucidal and adsorption mechanisms.

RESULTS

The HPLC/MS analysis of the extract revealed tentative identification of twenty compounds of polyphenolic nature, mainly flavonoids, lignans, coumarins, and anthocyanidins. The plant extract showed a cytotoxic effect against MCF-7 and Vero cells with IC50 values of 15.50 and 44 µg/ml, respectively, indicating its aggressiveness against the proliferation of breast cancer cells as confirmed by apoptotic genes expression which revealed upregulation of Bax and Caspase 3 but further insight analysis is needed to explore exact mechanistic pathway. Antiviral activity against Adv-5 was observed at a non-toxic concentration of the tested extract.

CONCLUSIONS

Such observations against human breast cancer and viral replication supported further studies for nanoformulations in drug delivery systems as targeting therapy and in vivo studies before biomedical applications.

Antioxidant and Enzyme Inhibitory Activities of Rhoifolin Flavonoid: In Vitro and in Silico Studies

Rhoifolin (apigenin-7-O-β-neohesperidoside) belongs to the class of flavonoids and was reported to exhibit anti-inflammatory, cytotoxic, antidiabetic, hepatoprotective, and cardioprotective activities. The current study presents the in-vitro evaluation of the antioxidative effects of rhoifolin by many assays, namely DPPH, CUPRAC, ABTS, phosphomolybdenum, and FRAP. Enzyme inhibitory potential was also evaluated for acetylcholinesterase (AChE), butyrylcholinesterase (BChE), tyrosinase, amylase, and glucosidase enzymes. While results revealed weak antioxidant activities for rhoifolin, the compound demonstrated some promising enzyme inhibitory effects against BChE (4.03 mg GALAE/g) and tyrosinase (7.44 mg KAE/g) but was not active on AChE. Regarding anti-diabetic enzymes, the compound was active on amylase but did not show any inhibition effect on glucosidase. In-silico molecular docking study was performed for rhoifolin on the active site of NADPH oxidase, BChE, and amylase enzymes to verify the observed enzyme inhibitory effect. Good binding affinities were observed for rhoifolin on all the docked enzymes, revealing numerous hydrogen bonds, carbon-hydrogen, van der Waals interactions. This is the first study to evaluate the enzyme inhibition potential of rhoifolin. We concluded that the increase in the degree of glycosylation might decrease the antioxidant abilities of flavonoids and that rhoifolin had moderate enzyme inhibition abilities to be investigated in future studies.

Comparative Study of Bi2 O3 , MgO and ZrO2 Nanomaterials designed by Polymer Sacrificial Method for Amoxicillin delivery and Bone Regeneration: In-Vitro Studies.. [DOI: 10.21203/rs.3.rs-3146890/v1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

Hard tissue scientists face many difficulties, including persistent osteomyelitis and diseased bone abnormalities. Inorganic mesoporous nanomaterials are excellent candidates for the adsorption and loading of bioactive medicinal substances because to their chemical-physical characteristics. Recently, zirconium oxide, magnesium oxide and bismuth oxide nanoparticles are of great surface area and biocompatibility, and they have been described as a new drug delivery carrier. In this study, amoxicillin antibiotic was loaded into the prepared mesoporous nanomaterials (ZrO2, MgO and Bi2O3) to form a local antibiotic delivery system. The prepared mesoporous nanomaterials were investigated by XRD, FTIR, TEM, zeta potential and BET surface area measurements. Amoxicillin antibiotic was released from the prepared mesoporous nanomaterials in PBS. The effectiveness of the antibacterial study against several gram-positive and gram-negative bacterial strains was assessed. The cytotoxicity study of the human osteoblast-like cells (MG-63) was tested for all prepared mesoporous nanomaterials utilizing MTT assay. ZrO2 demonstrated particle diameters in the range of (5.26– 11.47nm), MgO was (70–80nm) and Bi2O3 was (9.79– 13.7nm). The greater surface area was confirmed for Bi2O3 sample (3.99 m2g− 1) by BET surface area. Amoxicillin loaded mesoporous nano powders exhibited impressive antibacterial and antifungal activities. MgO and Bi2O3 mesoporous nanoparticles exhibited better antimicrobial activities compared to ZrO2 sample. The proliferation for all samples gave good results especially for MgO and Bi2O3. As a result, the produced mesoporous nanomaterials have a significant potential for use as medicine delivery systems for bone regeneration and for enhancing the properties of other products in medical applications.

Nanoparticle Synthesis and Their Integration into Polymer-Based Fibers for Biomedical Applications

The potential of nanoparticles as effective drug delivery systems combined with the versatility of fibers has led to the development of new and improved strategies to help in the diagnosis and treatment of diseases. Nanoparticles have extraordinary characteristics that are helpful in several applications, including wound dressings, microbial balance approaches, tissue regeneration, and cancer treatment. Owing to their large surface area, tailor-ability, and persistent diameter, fibers are also used for wound dressings, tissue engineering, controlled drug delivery, and protective clothing. The combination of nanoparticles with fibers has the power to generate delivery systems that have enhanced performance over the individual architectures. This review aims at illustrating the main possibilities and trends of fibers functionalized with nanoparticles, focusing on inorganic and organic nanoparticles and polymer-based fibers. Emphasis on the recent progress in the fabrication procedures of several types of nanoparticles and in the description of the most used polymers to produce fibers has been undertaken, along with the bioactivity of such alliances in several biomedical applications. To finish, future perspectives of nanoparticles incorporated within polymer-based fibers for clinical use are presented and discussed, thus showcasing relevant paths to follow for enhanced success in the field.

Silk sericin conjugated magnesium oxide nanoparticles for its antioxidant, anti-aging, and anti-biofilm activities

The Silk sericin protein was conjugated with magnesium oxide (MgO) nanoparticles to form SS-MgO-NPs . UV, XRD, FTIR, SEM, DLS, and EDX were used to confirm the formation of SS-MgO-NPs. The absorption band of SS-MgO-NPs using UV-visible spectra was observed at 310 nm, with an average size of the nanoparticles was 65-88 nm analyzed from DLS. The presence of alcohol, CN, and CC, alkanes, alkenes, and cis alkenes, in silk sericin, is confirmed by FT-IR and may act as a stabilizing agent. Later SS-MgO-NPs were evaluated for antioxidant, antibacterial, anti-biofilm, ,anti-aging, and anticancer properties. The SS-MgO-NPs inhibited the formation of biofilm of Pseudomonas aeruginosa and Bacillus cereus. The blood compatibility of SS-MgO-NPs, delaying coagulation was observed using human, blood, and goat blood samples. The SS-MgO-NPs exhibited significant anticancer activity on MCF-7 (IC₅₀ 207.6 μg/mL) cancer cell lines. Correspondingly, SS-MgO-NPs demonstrated dose-dependent inhibition of the enzymes in the following order collagenase > elastase > tyrosinase > hyaluronidase, with IC₅₀ values of 75.3, 85.3, 133.6, and 156.3 μgmL^-1, respectively. This exhibits the compoundposses anti-aging properties. So, in in vitro settings, SS-MgO-NPs can be used as an antibacterial, anti-aging, and anticancer agent. Additionally, in vivo research is necessary to validate its therapeutic applications.

Concurrent Tissue Engineering for Wound Healing in Diabetic Rats Utilizing Dual Actions of Green Synthesized CuO NPs Prepared from Two Plants Grown in Egypt

Purpose

Diabetes mellitus is among the disrupting factors of orchestrated events in wound healing. This necessitates the urge for tailored medications, which are continually offered by nano-sized materials. Herein, we present greenly synthesized copper oxide nanoparticles (CuO NPs), obtained from either Punica granatum L. (PG) or Pisidium guajava L. (GV) extract, to function as potent bactericidal and fungicidal materials that promote regeneration and healing of the targeted diabetic wounded tissues.

Methods

PG or GV plant extracts were compared as source of reducing agents for CuO NPs synthesis process. The yield and photocatalytic degradation potential were compared. NPs obtained from the superior extract, PG, were characterized using particles size, zeta potential, XRD, TEM, SEM, and EDX. The antimicrobial effects were evaluated on multidrug-resistant human pathogens and then the percentage biofilm inhibitory concentration was determined. The cytotoxicity and wound scratch study were conducted on a normal human skin cell line. In-vivo wound healing activity in diabetic rats was assessed along with histopathological and immunohistochemical examination of CD45 and α-SMA.

Results

The greenly synthesized CuO NPs are spherical in shape having a diameter of 233nm. CuO NPs (250µg/mL) acted as promising biocontrol agent against a variety of multidrug-resistant human pathogens. They significantly exhibited 29.460±0.811% healing of the scratched wound compared to only 2.001±0.155% for the control. Wound healing experiments revealed the safety of a low CuO NPs concentration in a diabetic animal model as well as on human normal skin fibroblast cell line. The treated group with a dose of 2mg/cm2 showed superior results with a WC50 value of 7.2 days, and 92% wound contraction after 13-days. Immunohistochemical investigation of the same group demonstrated well-established fibrous tissue (5.7±3.7/HPF), and an amplified granulation tissue of recently developed blood vessels (70±1.5/HPF).

Conclusion

Green synthesized CuO NPs could overcome drug resistance and promote wound healing process effectively.

Impact of acute and sub-acute exposure of magnesium oxide nanoparticles on mrigal Cirrhinus mrigala

This experiment was conducted to investigate the impact of acute and sub-acute exposure of magnesium oxide nanoparticles on Mrigal Cirrhinus mrigala. For sub-acute tests 1/100,1/50,1/10 were selected based on the LC₅₀ at 96 h s. Protein, carbohydrate, and lipid, Aspartate aminotransferase, alanine transaminase, lactate dehydrogenase and DPPH, HRSA assays were analyzed in the gill, muscle, and liver of Mrigal. Protein and lipid levels increased on the 7th,14th day compared to control. Carbohydrate levels decreased on the 7th,14th day of exposure, and the enzymatical changes increased on the 7^th,14th day. Antioxidant levels highly increased in DPPH assay compared to the HRSA assay. This study provides the biochemical, antioxidant, and behavioral changes in relation to the exposure of MgO NPs.

Magnesium Oxide Nanoparticles: Effective Antilarvicidal and Antibacterial Agents

People are vulnerable to mosquito-borne infections in tropical and subtropical climate countries. Due to resistive issues, vector control is an immediate concern in today's environment. The current study describes the synthesis of magnesium oxide by four different approaches including green, microwave, sol-gel, and hydrothermal methods. The synthesized magnesium oxide (MgO) nanoparticles were characterized using Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), high-resolution scanning electron microscopy (HRSEM), and energy-dispersive X-ray analysis (EDAX) techniques. The FT-IR studies reveal the presence of functional groups in the synthesized nanoparticles. The structural and morphological studies were investigated using XRD and HRSEM. EDAX reveals the presence of Mg and O in the prepared samples. The synthesized MgO NPs were screened for antibacterial studies against Gram-positive strains, Enterococcus faecalis and Staphylococcus aureus, two Gram-negative cultures, Escherichia coli and Klebsiella pneumoniae, using different concentrations. The results indicated excellent antibacterial activity against both Gram-positive and Gram-negative bacteria at 50 mg/mL hydrothermally produced MgO nanoparticles, with a maximal zone of inhibition (ZOI) of 5 mm for S. aureus, 7 mm for E. faecalis, and 6 mm for K. pneumoniae. The ZOI of E. coli was found to be the greatest at 9 mm when 50 mg/mL sol-gel-produced MgO nanoparticles were used. The synthesized MgO nanostructures were tested against fourth-instar larvae of Aedes aegypti and Aedes albopictus, and the hydrothermally synthesized MgO nanostructures exhibited better results when compared with other methods of synthesis. The reports show that A. aegypti and A. albopictus mortality rates were reported to be the lowest with green-manufactured MgO nanoparticles (7.5 g mL-1) and the highest with hydrothermally synthesized MgO nanoparticles (120 g mL-1). The research indicates that MgO nanostructures are promising drugs for antibacterial and mosquitocidal larvae control properties.

GC/MS Analysis, Cytotoxicity, and Antiviral Activities of Annona glabra Hexane Extract Supported by In Silico Study

Annona glabra Linn is employed in conventional medicine to treat a number of human disorders, including cancer and viruses. In the present investigation, the significant phytochemical components of Annona glabra hexane extract were identified using gas chromatography-mass spectrometry (GC-MS) analysis. Three major compounds were identified in the hexane extract: tritriacontane (30.23%), 13, 17-dimethyl-tritriacontane (22.44%), and limonene (18.97%). MTT assay was used to assess the cytotoxicity of the extract on six human cancer cell lines including liver (HepG-2), pancreas (PANC-1), lung (A-549), breast (MCF-7, HTB-22), prostate (PC-3), and colon (CACO-2, ATB-37). The extract exhibited significant cytotoxic activity against both CACO-2 and A-549 cancer cell lines (IC₅₀ = 47 ± 0.74 μg/mL and 56.82 ± 0.92 μg/mL) in comparison with doxorubicin (IC₅₀ = 31.91 ± 0.81 μg/mL and 23.39 ± 0.43 μg/mL) and of SI of 3.8 and 3.1, respectively. It also induced moderate-to-weak activities against the other cancerous cell lines: PC-3, PANC-1, MCF-7, and HepG-2 (IC₅₀ = 81.86 ± 3.26, 57.34 ± 0.77, 80.31 ± 4.13, and 57.01 ± 0.85 μg/mL) in comparison to doxorubicin (IC₅₀ = 32.9 ± 1.74, 19.07 ± 0.2, 15.48 ± 0.84 and 5.4 ± 0.22 μg/mL, respectively) and SI of 2.2, 3.1, 2.2, and 3.1, respectively. In vitro anti-HSV1 (Herpes simplex 1 virus) and HAV (Hepatitis A virus) activity was evaluated using MTT colorimetric assay with three different protocols to test protective, anti-replicative, and anti-infective antiviral activities, and three separate replications of each experiment were conducted. The plant extract showed promising protective and virucidal activity against HSV1 with no significant difference with acyclovir (79.55 ± 1.67 vs. 68.44 ± 7.62 and 70.91 ± 7.02 vs. 83.76 ± 5.67), while it showed mild protective antiviral activity against HAV (48.08 ±3.46) with no significant difference vs. acyclovir (36.89 ± 6.61). The selected main compounds were examined for their bioactivity through in silico molecular docking, which exhibited that limonene could possess the strongest antiviral properties. These findings support Annona glabra's conventional use, which is an effective source of antiviral and anticancer substances that could be used in pharmaceuticals.

A critical review on the bio-mediated green synthesis and multiple applications of magnesium oxide nanoparticles

Nowadays, advancements in nanotechnology have efficiently solved many global problems, such as environmental pollution, climate change, and infectious diseases. Nano-scaled materials have played a central role in this evolution. Chemical synthesis of nanomaterials, however, required hazardous chemicals, unsafe, eco-unfriendly, and cost-ineffective, calling for green synthesis methods. Here, we review the green synthesis of MgO nanoparticles and their applications in biochemical, environmental remediation, catalysis, and energy production. Green MgO nanoparticles can be safely produced using biomolecules extracted from plants, fungus, bacteria, algae, and lichens. They exhibited fascinating and unique properties in morphology, surface area, particle size, and stabilization. Green MgO nanoparticles served as excellent antimicrobial agents, adsorbents, colorimetric sensors, and had enormous potential in biomedical therapies against cancers, oxidants, diseases, and the sensing detection of dopamine. In addition, green MgO nanoparticles are of great interests in plant pathogens, phytoremediation, plant cell and organ culture, and seed germination in the agricultural sector. This review also highlighted recent advances in using green MgO nanoparticles as nanocatalysts, nano-fertilizers, and nano-pesticides. Thanks to many emerging applications, green MgO nanoparticles can become a promising platform for future studies.

Phytochemical Constituents, Folk Medicinal Uses, and Biological Activities of Genus Angelica: A Review

Genus Angelica is one of the widely distributed and well-known genera of family Umbelliferae. It is utilized mainly by Chinese and Korean populations especially in their folk medicine. Angelica comprises a lot of medicinally important phytoconstituents such as coumarins, furanocoumarins, flavonoids, essential oils, verbascosides, polysaccharides, etc. Members of this genus play important roles, namely antioxidant, anti-inflammatory, anti-microbial, anti-diabetic, skin-whitening, cytotoxic, hepatoprotective, and many others. This review draws attention to many species of genus Angelica with much focus on A. dahurica being one of the highly medicinally used species within this genus.

Application of Metal Nanoparticles for Production of Self-Sterilizing Coatings

Metal nanoparticles (NPs) are increasingly being used in many areas, e.g., industry, pharmacy, and biomedical engineering. NPs can be obtained through chemical and biological synthesis or using physical methods. AgNPs, AuNPs, CuNPs, FeNPs, MgNPs, SnO2NPs, TiO2NPs, and ZnONPs are the most commonly synthesized metal nanoparticles. Many of them have anti-microbial properties and documented activity supported by many tests against some species of pathogenic bacteria, viruses, and fungi. AgNPs, which are used for the production of commercial self-sterilizing packages, are one of the best-explored nanoparticles. Moreover, the EFSA has approved the use of small doses of silver nanoparticles (0.05 mg Ag·kg−1) to food products. Recent studies have shown that metal NPs can be used for the production of coatings to prevent the spread of the SARS-CoV-2 virus, which has caused the global pandemic. Some nanoparticles (e.g., ZnONPs and MgONPs) have the Generally Recognized As Safe (GRAS) status, i.e., they are considered safe for consumption and can be used for the production of edible coatings, protecting food against spoilage. Promising results have been obtained in research on the use of more than one type of nanometals, which prevents the development of pathogen resistance through various mechanisms of inactivation thereof.

Inorganic Nanoparticles in Bone Healing Applications

Modern biomedicine aims to develop integrated solutions that use medical, biotechnological, materials science, and engineering concepts to create functional alternatives for the specific, selective, and accurate management of medical conditions. In the particular case of tissue engineering, designing a model that simulates all tissue qualities and fulfills all tissue requirements is a continuous challenge in the field of bone regeneration. The therapeutic protocols used for bone healing applications are limited by the hierarchical nature and extensive vascularization of osseous tissue, especially in large bone lesions. In this regard, nanotechnology paves the way for a new era in bone treatment, repair and regeneration, by enabling the fabrication of complex nanostructures that are similar to those found in the natural bone and which exhibit multifunctional bioactivity. This review aims to lay out the tremendous outcomes of using inorganic nanoparticles in bone healing applications, including bone repair and regeneration, and modern therapeutic strategies for bone-related pathologies.

GC/MS Profiling, Anti-Collagenase, Anti-Elastase, Anti-Tyrosinase and Anti-Hyaluronidase Activities of a Stenocarpus sinuatus Leaves Extract

Today, skin care products and cosmetic preparations containing natural ingredients are widely preferred by consumers. Therefore, many cosmetic brands are encouraged to offer more natural products to the market, such as plant extracts that can be used for their antiaging, antiwrinkle, and depigmentation properties and other cosmetic purposes. In the current study, the volatile constituents of the hexane-soluble fraction of a Stenocarpus sinuatus (family Proteaceae) leaf methanol extract (SSHF) were analyzed using GC/MS analysis. Moreover, the antiaging activity of SSHF was evaluated through in vitro studies of anti-collagenase, anti-elastase, anti-tyrosinase, and anti-hyaluronidase activities. In addition, an in silico docking study was carried out to identify the interaction mechanisms of the major compounds in SSHF with the active sites of the target enzymes. Furthermore, an in silico toxicity study of the identified compounds in SSHF was performed. It was revealed that vitamin E (α-tocopherol) was the major constituent of SSHF, representing 52.59% of the extract, followed by γ-sitosterol (8.65%), neophytadiene (8.19%), β-tocopherol (6.07%), and others. The in vitro studies showed a significant inhibition by SSHF of collagenase, elastase, tyrosinase, and hyaluronidase, with IC₅₀ values of 60.03, 177.5, 67.5, and 38.8 µg/mL, respectively, comparable to those of the positive controls epigallocatechin gallate (ECGC, for collagenase, elastase, hyaluronidase) and kojic acid (for tyrosinase). Additionally, the molecular docking study revealed good acceptable binding scores of the four major compounds, comparable to those of ECGC and kojic acid. Besides, the SSHF identified phytoconstituents showed no predicted potential toxicity nor skin toxicity, as determined in silico. In conclusion, the antiaging potential of SSHF may be attributed to its high content of vitamin E in addition to the synergetic effect of other volatile constituents. Thus, SSHF could be incorporated in pharmaceutical skin care products and cosmetics after further studies.

LC-ESI-MS/MS Polyphenolic Profile and In Vitro Study of Cosmetic Potential of Aerva lanata (L.) Juss. Herb Extracts

The aim of the present study was to investigate the phenolic composition and the biological properties of different Aerva lanata (L). Juss. herb extracts obtained with the use of accelerated solvent extraction (ASE), i.e., a green, ecological method, for cosmetic purposes. All samples exhibited high DPPH^• (9.17–119.85 mg TE/g) and ABTS^•+ (9.90–107.58 mg TE/g) scavenging activity. The extracts exhibited considerable anti-lipoxygenase (EC₅₀ between 1.14 mg/mL and 3.73 mg/mL) and anti-xanthine oxidase (EC₅₀ between 1.28 mg/mL and 3.72 mg/mL) activities, moderate chelating activity (EC₅₀ between 1.58 mg/mL and 5.30 mg/mL), and high antioxidant potential in the ORAC assay (0.36–3.84 mM TE/g). Changes in the polyphenol profile of the analysed samples depending on the solvent and temperature used for the extraction were determined with the liquid chromatography/electrospray mass spectrometry (LC-ESI-MS/MS) method. Twenty-one phenolic compounds, including flavonoids and phenolic acids, were detected and quantified. It was shown that tiliroside was one of the main phenolic metabolites in the A. lanata (L.) Juss. herb., which may suggest that this compound may be largely responsible for the observed anti-inflammatory activity of the extracts. In addition, the studied extracts exhibited promising skin-related (anti-tyrosinase, anti-elastase, anti-collagenase, and anti-hyaluronidase) activity. This study showed that Aerva lanata (L.) Juss. contains high amounts of phenolic compounds, including tiliroside, and has good skin-related activities. Therefore, the plant may be interesting as a novel source of bioactive agents for cosmetic industries.

High Doses of Silica Nanoparticles Obtained by Microemulsion and Green Routes Compromise Human Alveolar Cells Morphology and Stiffness Differently

Among all the inorganic nanomaterials used in commercial products, industry, and medicine, the amorphous silica nanoparticles (SiO2 NPs) appeared to be often tolerated in living organisms. However, despite several toxicity studies, some concerns about the exposure to high doses of SiO2 NPs with different sizes were raised. Then, we used the microemulsion method to obtain stable SiO2 NPs having different sizes (110 nm, 50 nm, and 25 nm). In addition, a new one-pot green synthetic route using leaves extract of Laurus nobilis was performed, obtaining monodispersed ultrasmall SiO2 NPs without the use of dangerous chemicals. The NPs achieved by microemulsion were further functionalized with amino groups making the NPs surface positively charged. Then, high doses of SiO2 NPs (1 mg/mL and 3 mg/mL) achieved from the two routes, having different sizes and surface charges, were used to assess their impact on human alveolar cells (A549), being the best cell model mimicking the inhalation route. Cell viability and caspase-3 induction were analyzed as well as the cellular uptake, obtaining that the smallest (25 nm) and positive-charged NPs were more able to induce cytotoxicity, reaching values of about 60% of cell death. Surprisingly, cells incubated with green SiO2 NPs did not show strong toxicity, and 70% of them remained vital. This result was unusual for ultrasmall nanoobjects, generally highly toxic. The actin reorganization, nuclear morphology alteration, and cell membrane elasticity analyses confirmed the trend achieved from the biological assays. The obtained data demonstrate that the increase in cellular softness, i.e., the decrease in Young’s modulus, could be associated with the smaller and positive NPs, recording values of about 3 kPa. On the contrary, green NPs triggered a slight decrease of stiffness values (c.a. 6 kPa) compared to the untreated cells (c.a. 8 kPa). As the softer cells were implicated in cancer progression and metastasization, this evidence strongly supported the idea of a link between the cell elasticity and physicochemical properties of NPs that, in turn, influenced the interaction with the cell membrane. Thus, the green SiO2 NPs compromised cells to a lesser extent than the other SiO2 NPs types. In this scenario, the elasticity evaluation could be an interesting tool to understand the toxicity of NPs with the aim of predicting some pathological phenomena associated with their exposure.

Formation, antimicrobial activity, and biomedical performance of plant-based nanoparticles: a review

Because many engineered nanoparticles are toxic, there is a need for methods to fabricate safe nanoparticles such as plant-based nanoparticles. Indeed, plant extracts contain flavonoids, amino acids, proteins, polysaccharides, enzymes, polyphenols, steroids, and reducing sugars that facilitate the reduction, formation, and stabilization of nanoparticles. Moreover, synthesizing nanoparticles from plant extracts is fast, safe, and cost-effective because it does not consume much energy, and non-toxic derivatives are generated. These nanoparticles have diverse and unique properties of interest for applications in many fields. Here, we review the synthesis of metal/metal oxide nanoparticles with plant extracts. These nanoparticles display antibacterial, antifungal, anticancer, and antioxidant properties. Plant-based nanoparticles are also useful for medical diagnosis and drug delivery.

Green-Synthesized Magnesium Hydroxide Nanoparticles Induced Osteoblastic Differentiation in Bone Co-Cultured Cells

In this work, magnesium hydroxide NPs were synthesized using water (Mg(OH)₂ NPs) or a rose hip (RH) extract (Mg(OH)₂RH NPs) and tested for the bone cells’ effects in co-cultured osteoblastic and osteoclastic cells, using a Transwell^® insert system, allowing reciprocal cell paracrine interactions. Behavior of each cell population was characterized for typical phenotype markers, at days 1 and 6. Cell cultures treated with osteogenic/osteoclastogenic inducers were used as positive control of cell differentiation. The NPs presented a round shape morphology with an average diameter ~90 nm (Mg(OH)₂ NPs) and below 10 nm (Mg(OH)₂RH NPs. Both NPs induced osteoblastic and osteoclastic behavior similarly to that observed in induced osteoblastic and osteoclastic cultures (positive controls). Differences between the two types of particles were evident at the gene expression level. Compared to Mg(OH)₂ NPs, the green-synthesized NPs greatly increased the expression of osteoblastic genes coding for the early markers ALP and collagen type 1 and the later transcription factor osterix, while decreasing the expression of osteoclastogenic genes, namely the essential transcription factor NFATC1, TRAP and the genes coding for the functional markers CA2 and CTSK. Overall, a positive added effect could be hypothesized for Mg(OH)₂RH NPs with potential usefulness to promote bone formation in regenerative applications.

Synthesis, Properties, and Selected Technical Applications of Magnesium Oxide Nanoparticles: A Review

In the last few decades, there has been a trend involving the use of nanoscale fillers in a variety of applications. Significant improvements have been achieved in the areas of their preparation and further applications (e.g., in industry, agriculture, and medicine). One of these promising materials is magnesium oxide (MgO), the unique properties of which make it a suitable candidate for use in a wide range of applications. Generally, MgO is a white, hygroscopic solid mineral, and its lattice consists of Mg2+ ions and O2− ions. Nanostructured MgO can be prepared through different chemical (bottom-up approach) or physical (top-down approach) routes. The required resultant properties (e.g., bandgap, crystallite size, and shape) can be achieved depending on the reaction conditions, basic starting materials, or their concentrations. In addition to its unique material properties, MgO is also potentially of interest due to its nontoxicity and environmental friendliness, which allow it to be widely used in medicine and biotechnological applications.