The virucidal effects of 405 nm visible light on SARS-CoV-2 and influenza A virus

Influence of colour background on anti-viral activity against viral haemorrhagic septicaemia virus in zebrafish regulated by circadian rhythm signalling pathway

The influence of colour background on the regulation of behavioural and physiological responses in zebrafish is widely recognized. However, its specific effect on virus infection in zebrafish remains unclear. This study aimed to explore the susceptibility of zebrafish to viral haemorrhagic septicaemia virus (VHSV) infection in relation to background colour, investigate the underlying mechanisms, and elucidate the involvement of key molecules, using proteomic and gene expression analyses. The results revealed that zebrafish housed in a blue tank exhibited higher survival rates and considerably reduced VHSV replication compared to those housed in a yellow tank. Further, up-regulation of apolipoprotein 1 (APOA1) was identified as a crucial shared mechanism associated with survival in zebrafish exposed to VHSV infection and reared in a blue background. The mRNA expression level of bmal1a, a core gene involved in the circadian rhythm, was consistently downregulated in fish from the blue tank compared to fish from the yellow tank, regardless of infection status. Subsequently, zebrafish in the blue tank were exposed to daylight conditions to stimulate per2 and pgc1a expression, aiming to investigate their potential impact on VHSV infection. The validity of these interconnected events, triggered by background colour, involving APOA1 up-regulation, circadian rhythm modulation, and antiviral responses, was confirmed by treatments with hesperetin and cyclosporine A, an activator and inhibitor of apoa1 respectively. Our findings revealed the influence of background colour on the apoa1 expression level, thus establishing the involvement of a novel network through circadian rhythm signalling.

Photoinactivation of the bacteriophage PhiX174 by UVA radiation and visible light in SM buffer and DMEM-F12

OBJECTIVE

It has been observed that viruses can be inactivated by UVA radiation and visible light. The aim of this study is to investigate whether a medium that contains a photosensitizer might have an influence on viral reduction under irradiation by UVA, violet or blue light. Test virus is the bacteriophage PhiX174 in the photosensitizer-free SM buffer and DMEM-F12, which contains the known photosensitizer riboflavin.

RESULTS

The determined PhiX174 D90 doses in SM buffer and DMEM were 36.8 J/cm² and 13.6 J/cm² at 366 nm, 153.6 J/cm² and 129.1 J/cm² at 408 nm and 4988 J/cm² and 2477.1 J/cm² at 455 nm, respectively. It can be concluded that the medium has a large influence on the results. This might be caused by the photosensitizer riboflavin in DMEM-F12. As riboflavin is a key component in many cell culture media, irradiation experiments with viruses in cell culture media should be avoided if the investigation of intrinsical photoinactivation properties of viruses is aimed for.

Viricidal Efficacy of a 405-nm Environmental Decontamination System for Inactivation of Bacteriophage Phi6: Surrogate for SARS-CoV-2

The highly transmittable nature of SARS-CoV-2 has increased the necessity for novel strategies to safely decontaminate public areas. This study investigates the efficacy of a low irradiance 405-nm light environmental decontamination system for the inactivation of bacteriophage phi6 as a surrogate for SARS-CoV-2. Bacteriophage phi6 was exposed to increasing doses of low irradiance (~0.5 mW cm-2 ) 405-nm light while suspended in SM buffer and artificial human saliva at low (~103-4  PFU mL-1 ) and high (~107-8  PFU mL-1 ) seeding densities, to determine system efficacy for SARS-CoV-2 inactivation and establish the influence of biologically relevant suspension media on viral susceptibility. Complete/near-complete (≥99.4%) inactivation was demonstrated in all cases, with significantly enhanced reductions observed in biologically relevant media (P < 0.05). Doses of 43.2 and 172.8 J cm-2 were required to achieve ~3 log10 reductions at low density, and 97.2 and 259.2 J cm-2 achieved ~6 log10 reductions at high density, in saliva and SM buffer, respectively: 2.6-4 times less dose was required when suspended in saliva compared to SM buffer. Comparative exposure to higher irradiance (~50 mW cm-2 ) 405-nm light indicated that, on a per unit dose basis, 0.5 mW cm-2 treatments were capable of achieving up to 5.8 greater log10 reductions with up to 28-fold greater germicidal efficiency than that of 50 mW cm-2 treatments. These findings establish the efficacy of low irradiance 405-nm light systems for inactivation of a SARS-CoV-2 surrogate and demonstrate the significant enhancement in susceptibility when suspended in saliva, which is a major vector in COVID-19 transmission.

Impacts of Surface Characteristics and Dew Point on the Blue-Light (BL405) Inactivation of Viruses

The increased prevalence of multidrug-resistant organisms (MDROs), healthcare associated infections (HAIs), and the recent COVID-19 pandemic has caused the photoinactivation industry to explore alternative wavelengths. Blue light (BL405) has gained significant interest as it is much less harmful to the skin and eyes than traditional germicidal wavelengths; therefore, in theory, it can be used continuously with human exposure. At present, the viricidal effects of BL405 are largely unknown as the literature predominately addresses bacterial disinfection performed with this wavelength. This work provides novel findings to the industry, reporting on the virucidal effects of BL405 on surfaces. This research utilizes three surfaces: ceramic, PTFE, and stainless steel. The efficacy of BL405 inactivation varied by surface type, which was due to surface characteristics, such as the contact angle, porosity, zeta potential, and reflectivity. Additionally, the effect of the dew point on BL405 inactivation efficacy was determined. This research is the first to study the effects of the dew point on the virucidal effectiveness of BL405 surface inactivation. The effects of the dew point were significant for all surfaces and the control experiments. The high-dew-point conditions (18 °C) yielded higher levels of BL405 inactivation and viral degradation for the experiments and controls, respectively.

Disinfection of influenza a viruses by Hypocrellin a-mediated photodynamic inactivation

BACKGROUND

Influenza A viruses can be transmitted indirectly by surviving on the surface of an object. Photodynamic inactivation (PDI) is a promising approach for disinfection of pathogens.

METHODS

PDI was generated using Hypocrellin A (HA) and red light emitting diode (625-635 nm, 280 W/m2). Effects of the HA-mediated PDI on influenza viruses H1N1 and H3N2 were evaluated by the reduction of viral titers compared to virus control. After selection of the HA concentrations and illumination times, the applicability of PDI was assessed on surgical masks. Reactive oxygen species (ROS) were determined using a 2'-7'-dichlorodihydrofluorescein diacetate fluorescence probe.

RESULTS

In solution, 10 μM HA inactivated up to 5.11 ± 0.19 log10 TCID50 of H1N1 and 4.89 ± 0.38 log10 TCID50 of H3N2 by illumination for 5 and 30 min, respectively. When surgical masks were contaminated by virus before HA addition, PDI inactivated 99.99% (4.33 ± 0.34 log reduction) of H1N1 and 99.40% (2.22 ± 0.39 log reduction) of H3N2 under the selected condition. When the masks were pretreated with HA before virus addition, PDI decontaminated 99.92% (3.11 ± 0.19 log reduction) of H1N1 and 98.71% (1.89 ± 0.20 log reduction) of H3N2 virus. The fluorescence intensity of 2',7'-dichlorofluorescein in photoactivated HA was significantly higher than the cell control (P > 0.05), indicating that HA efficiently generated ROS.

CONCLUSIONS

HA-mediated PDI is effective for the disinfection of influenza viruses H1N1 and H3N2. The approach could be an alternative to decontaminating influenza A viruses on the surfaces of objects.

Light tolerance of extended spectrum β-lactamase producing Escherichia coli strains after repetitive exposure to far-UVC and blue LED light

AIMS

The aim of this study was to investigate dual far-UVC (Ultraviolet-C) (222 nm) and blue LED (Light Emitting Diode) (405 nm) light on the inactivation of extended spectrum β-lactamase-producing Escherichia coli (ESBL-Ec) and to determine if repetitive exposure to long pulses of light resulted in changes to light tolerance, and antibiotic susceptibility.

METHODS AND RESULTS

Antimicrobial efficiency of dual and individual light wavelengths and development of light tolerance in E. coli was evaluated through a spread plate method after exposure to light at 25 cm. Dual light exposure for 30 min resulted in a 5-6 log10 CFU mL-1 reduction in two ESBL-Ec and two antibiotic-sensitive control E. coli strains. The overall inhibition achieved by dual light treatment was always greater than the combined reductions (log10 CFU) observed from exposure to individual light wavelengths (combined 222-405 nm), indicating a synergistic relationship between blue LED and far-UVC light when used together. Repetitive long pulses of dual and individual far-UVC light exposure resulted in light tolerance in two ESBL-Ec strains but not the antibiotic-sensitive E. coli strains. Subsequent passages of repetitive light-treated ESBL-Ec strains continued to exhibit light tolerance. Antibiotic susceptibility was determined through a standard disk diffusion method. No changes were observed in the antibiotic susceptibility profiles for any of the four strains after exposure to either dual or individual wavelengths.

CONCLUSIONS

Dual light exposure was effective in the disinfection of ESBL-Ec in solution; however, antibiotic-resistant E. coli were able to develop light tolerance after repetitive exposure to light.

The inhibitory and inactivating effects of visible light on SARS-CoV-2: A narrative update

Prior to the coronavirus disease-19 (COVID-19) pandemic, the germicidal effects of visible light (λ = 400 - 700 nm) were well known. This review provides an overview of new findings that suggest there are direct inactivating effects of visible light - particularly blue wavelengths (λ = 400 - 500 nm) - on exposed severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) virions, and inhibitory effects on viral replication in infected cells. These findings complement emerging evidence that there may be clinical benefits of orally administered blue light for limiting the severity of COVID-19. Possible mechanisms of action of blue light (e.g., regulation of reactive oxygen species) and important mediators (e.g., melatonin) are discussed.

Inhibitory effect of 405 nm laser light on bacterial biofilm in urethral stent

The clinical use of urethral stents is usually complicated by various adverse effects, including dysuria, fever, and urinary tract infection (UTI). Biofilms (formed by bacteria, such as Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus) adhering to the stent cause UTIs in stented patients (approximately 11%). The undesirable consequences of antibiotics use include bacterial resistance, weight gain, and type 1 diabetes, which occur when antibiotics are used for a long time. We aimed to assess the efficacy of a new optical treatment with a 405 nm laser to inhibit bacterial growth in a urethral stent in vitro. The urethral stent was grown in S. aureus broth media for three days to induce biofilm formation under dynamic conditions. Various irradiation times with the 405 nm laser light were tested (5, 10, and 15 min). The efficacy of the optical treatment on biofilms was evaluated quantitatively and qualitatively. The production of reactive oxygen species helped eliminate the biofilm over the urethral stent after 405 nm irradiation. The inhibition rate corresponded to a 2.2 log reduction of colony-forming units/mL of bacteria after 0.3 W/cm² of irradiation for 10 min. The treated stent showed a significant reduction in biofilm formation compared with the untreated stent, as demonstrated by SYTO 9 and propidium iodide staining. MTT assays using the CCD-986sk cell line revealed no toxicity after 10 min of irradiation. We conclude that optical treatment with 405 nm laser light inhibits bacterial growth in urethral stents with no or minimal toxicity.

Assessment of SARS-CoV-2 surrogate inactivation on surfaces and in air using UV and blue light-based intervention technologies

The COVID-19 pandemic has created an urgent need to utilize existing and develop new intervention technologies for SARS-CoV-2 inactivation on surfaces and in the air. Ultraviolet (UV) technology has been shown to be an effective antimicrobial intervention. Here a study was conducted to determine the efficacy of commercially available UV and blue light-based devices for inactivating HCoV-229E, a surrogate of SARS-CoV-2. The results indicate that two UV devices designed for surface disinfection, with doses of 8.07 µJ/cm² for the 254 nm device and 20.61 µJ/cm² for the 275 nm device, were efficient in inactivating 4.94 logs of surface inoculated HCoV-229E. Additionally, a 222 nm UV device with intended ceiling-based operation was effective in inactivating 1.7 logs of the virus inoculated on surface, with a dose of 6 mJ/cm². A ceiling-based device designed to emit blue light at 405 nm was found to produce 89% reduction in HCoV-229E inoculated on a surface for a dose of 78 J/cm². Finally, the UV based 222 nm device was found to produce a 90% reduction in the concentration of airborne HCoV-229E, at a 55 µJ/cm² dose. These results are indicative of the great potential of using UV based technology for the control of SARS-CoV-2.Implications: An important avenue of arresting COVID-19 and future pandemics caused by infectious pathogens is through environmental disinfection. To this effect, the study presented here evaluates commercially available UV and blue light based antimicrobial devices for their ability to kill the human coronavirus HCoV-229E, a surrogate of SARS-CoV-2, on surfaces and in air. The results indicate that two handheld UV devices produced complete inactivation of surface viral inoculum and a UVC ceiling based device produced 1 log reduction in HCoV-229E in air. These results imply the efficacy of UV technology as an antimicrobial tool, especially for rapid disinfection of indoor air.

Effect of near-infrared and blue laser light on vero E6 cells SARS-CoV-2 infection model

Photobiomodulation therapy (PBMT) employing laser light has been emerging as a safe strategy to challenge viruses. In this study the effect of blue and near-infrared (NIR) laser light was assessed in an in vitro model of SARS-CoV-2 infection. PBMT at blue wavelength inhibited viral amplification when the virus was directly irradiated and then transferred to cell culture and when cells already infected were treated. The NIR wavelength resulted less efficacious showing a minor effect on the reduction of the viral load. The cells receiving the irradiated virus or directly irradiated rescued their viability to level comparable to not treated cells. Virion integrity and antigenicity were preserved after blue and NIR irradiation, suggesting that the PBMT antiviral effect was not correlated to viral lipidic envelope disruption. Our results suggested that PBMT can be considered a valid strategy to counteract SARS-CoV-2 infection, at least in vitro.

Stability of SARS-CoV-2 in cold-chain transportation environments and the efficacy of disinfection measures

Background

Low temperature is conducive to the survival of COVID-19. Some studies suggest that cold-chain environment may prolong the survival of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and increase the risk of transmission. However, the effect of cold-chain environmental factors and packaging materials on SARS-CoV-2 stability remains unclear.

Methods

This study aimed to reveal cold-chain environmental factors that preserve the stability of SARS-CoV-2 and further explore effective disinfection measures for SARS-CoV-2 in the cold-chain environment. The decay rate of SARS-CoV-2 pseudovirus in the cold-chain environment, on various types of packaging material surfaces, i.e., polyethylene plastic, stainless steel, Teflon and cardboard, and in frozen seawater was investigated. The influence of visible light (wavelength 450 nm-780 nm) and airflow on the stability of SARS-CoV-2 pseudovirus at -18°C was subsequently assessed.

Results

Experimental data show that SARS-CoV-2 pseudovirus decayed more rapidly on porous cardboard surfaces than on nonporous surfaces, including polyethylene (PE) plastic, stainless steel, and Teflon. Compared with that at 25°C, the decay rate of SARS-CoV-2 pseudovirus was significantly lower at low temperatures. Seawater preserved viral stability both at -18°C and with repeated freeze-thaw cycles compared with that in deionized water. Visible light from light-emitting diode (LED) illumination and airflow at -18°C reduced SARS-CoV-2 pseudovirus stability.

Conclusion

Our studies indicate that temperature and seawater in the cold chain are risk factors for SARS-CoV-2 transmission, and LED visible light irradiation and increased airflow may be used as disinfection measures for SARS-CoV-2 in the cold-chain environment.

Comparative Assessment of Pulsed and Continuous LED UV-A Lighting for Disinfection of Contaminated Surfaces

The germicidal efficacy of LED UV-A lighting has scarcely been compared in continuous and pulsed modes for contaminated surfaces. Herein, we compare the disinfection properties of pulsed versus continuous lighting at equal irradiances using a 365 nm LED device that replicates the doses of occupied-space continuous disinfection UV-A products. Representative organisms evaluated in this study included human-infectious enveloped and non-enveloped viruses (lentivirus and adeno-associated virus, respectively), a bacterial endospore (Bacillus atrophaeus), and a resilient gram-positive bacterium (Enterococcus faecalis). Nominal UV-A irradiances were tested at or below the UL standard limit for continuous human exposure (maximum irradiance of 10 W/m2). We observed photoinactivation properties that varied by organism type, with bacteria and enveloped virus being more susceptible to UV-A than non-enveloped virus and spores. Overall, we conclude that continuous-mode UV-A lighting is better suited for occupied-space disinfection than pulsing UV-A at equivalent low irradiances, and we draw comparisons to other studies in the literature.

Disinfection and decontamination in the context of SARS-CoV-2-specific data

Given the high transmissibility of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) as witnessed early in the coronavirus disease 2019 (COVID-19) pandemic, concerns arose with the existing methods for virus disinfection and decontamination. The need for SARS-CoV-2-specific data stimulated considerable research in this regard. Overall, SARS-CoV-2 is practically and equally susceptible to approaches for disinfection and decontamination that have been previously found for other human or animal coronaviruses. The latter have included techniques utilizing temperature modulation, pH extremes, irradiation, and chemical treatments. These physicochemical methods are a necessary adjunct to other prevention strategies, given the environmental and patient surface ubiquity of the virus. Classic studies of disinfection have also allowed for extrapolation to the eradication of the virus on human mucosal surfaces by some chemical means. Despite considerable laboratory study, practical field assessments are generally lacking and need to be encouraged to confirm the correlation of interventions with viral eradication and infection prevention. Transparency in the constitution and use of any method or chemical is also essential to furthering practical applications.

Viral inactivation by light

Nowadays, viral infections are one of the greatest challenges for medical sciences and human society. While antiviral compounds and chemical inactivation remain inadequate, physical approaches based on irradiation provide new potentials for prevention and treatment of viral infections, without the risk of drug resistance and other unwanted side effects. Light across the electromagnetic spectrum can inactivate the virions using ionizing and non-ionizing radiations. This review highlights the anti-viral utility of radiant methods from the aspects of ionizing radiation, including high energy ultraviolet, gamma ray, X-ray, and neutron, and non-ionizing photo-inactivation, including lasers and blue light.

Overview of the Role of Spatial Factors in Indoor SARS-CoV-2 Transmission: A Space-Based Framework for Assessing the Multi-Route Infection Risk

The COVID-19 pandemic has lasted from 2019 to 2022, severely disrupting human health and daily life. The combined effects of spatial, environmental, and behavioral factors on indoor COVID-19 spread and their interactions are usually ignored. Especially, there is a lack of discussion on the role of spatial factors in reducing the risk of virus transmission in complex and diverse indoor environments. This paper endeavours to summarize the spatial factors and their effects involved in indoor virus transmission. The process of release, transport, and intake of SARS-CoV-2 was reviewed, and six transmission routes according to spatial distance and exposure way were classified. The triangular relationship between spatial, environmental and occupant behavioral parameters during virus transmission was discussed. The detailed effects of spatial parameters on droplet-based, surface-based and air-based transmission processes and virus viability were summarized. We found that spatial layout, public-facility design and openings have a significant indirect impact on the indoor virus distribution and transmission by affecting occupant behavior, indoor airflow field and virus stability. We proposed a space-based indoor multi-route infection risk assessment framework, in which the 3D building model containing detailed spatial information, occupant behavior model, virus-spread model and infection-risk calculation model are linked together. It is also applicable to other, similar, respiratory infectious diseases such as SARS, influenza, etc. This study contributes to developing building-level, infection-risk assessment models, which could help building practitioners make better decisions to improve the building's epidemic-resistance performance.

Effect of inactivating RNA viruses by coupled UVC and UVA LEDs evaluated by a viral surrogate commonly used as a genetic vector

RNA viruses are ubiquitous in nature, many of which can cause severe infectious syndromes to humanity, e.g., the SARS-CoV-2 virus. Ultraviolet (UV) radiation has been widely studied for inactivating various species of microorganisms, including viruses. The most applicable UV light for viruses ranges from 200nm to 280nm in wavelength, i.e., UVC. More recently, the synergy of UVA light with UVC has been studied in disinfecting bacteria in polluted water. However, little attention has been paid to studying viral inactivation by coupled UVC and UVA LEDs. The necessity of such research is to find an effective and economical solution for the LEDs of these two bands. Along this track, we attempt to tackle two major challenges. The first is to find a suitable viral surrogate that can safely be used in ordinary labs. In this aspect, lentivirus is commonly used as a genetic vector and has been selected to surrogate RNA viruses. Another is to determine the effective dosage of the coupled UVC and UVA light. To this end, the surrogate lentivirus was irradiated by 280nm (UVC) LEDs, 365nm (UVA) LEDs, and their combination at various doses. Survival rates were detected to compare the efficacy of various options. Moreover, the viral RNA damage was detected by RT-qPCR to disclose the mechanism of viral death. The results have shown that for the same duration of irradiation, the effect of the full-power 280nm LEDs is equivalent to that of the half-power 280nm LEDs combined with a suitable radiant power of the 365nm LEDs. The observations have been further confirmed by the effect of damaging the viral RNA by either the 280nm or 365nm light. In conclusion, the experimental results provide clear evidence of alleviating the requirement of UVC LEDs in viral inactivation by substituting them partially with UVA LEDs.

Visible 405 nm Violet-Blue Light Successfully Inactivates HIV-1 in Human Plasma

Despite significant advances in ensuring the safety of the blood supply, there is continued risk of transfusion transmitted infections (TTIs) from newly emerging or re-emerging infections. Globally, several pathogen reduction technologies (PRTs) for blood safety have been in development as an alternative to traditional treatment methods. Despite broad spectrum antimicrobial efficacy, some of the approved ultraviolet (UV) light-based PRTs, understandably due to UV light-associated toxicities, fall short in preserving the full functional spectrum of the treated blood components. As a safer alternative to the UV-based microbicidal technologies, investigations into the use of violet-blue light in the region of 405 nm have been on the rise as these wavelengths do not impair the treated product at doses that demonstrate microbicidal activity. Recently, we have demonstrated that a 405 nm violet-blue light dose of 270 J/cm² was sufficient for reducing bacteria and the parasite in plasma and platelets suspended in plasma while preserving the quality of the treated blood product stored for transfusion. Drawn from the previous experience, here we evaluated the virucidal potential of 405 nm violet-blue light dose of 270 J/cm² on an important blood-borne enveloped virus, the human immunodeficiency virus 1 (HIV-1), in human plasma. Both test plasma (HIV-1 spiked and treated with various doses of 405 nm light) and control plasma (HIV-1 spiked, but not treated with the light) samples were cultured with HIV-1 permissive H9 cell line for up to 21 days to estimate the viral titers. Quantitative HIV-1 p24 antigen (HIV-1 p24) levels reflective of HIV-1 titers were measured for each light dose to assess virus infectivity. Our results demonstrate that a 405 nm light dose of 270 J/cm² is also capable of 4–5 log HIV-1 reduction in plasma under the conditions tested. Overall, this study provides the first proof-of-concept that 405 nm violet-blue light successfully inactivates HIV-1 present in human plasma, thereby demonstrating its potential towards being an effective PRT for this blood component safety.

Direct inactivation of SARS-CoV-2 by low level blue photobiomodulation LED at 470, 454 and 450 nm

Blue light has been already reported as able to counteract different types of microorganisms including Gram-positive and Gram-negative bacteria, fungi and viruses, especially the enveloped ones. It has been reported that both blue and visible light can efficiently impact SARS-CoV-2 by affecting its ability to replicate in in vitro cellular models of infection. In this study, blue light at 450, 454 and 470 nm was tested on SARS-CoV-2 to evaluate the residual viral infectious potential on Vero E6, Caco-2 and Calu-3 cells, after the irradiation of viral particles. Following 12' of irradiation at 40 mW/cm² , a drastic block of viral amplification was observed. Indeed, at 7 days post-irradiation/infection the viral load was the same as the one measured 1 day post-irradiation/infection, and cellular viability was maintained showing similar levels to the noninfected control cells. Taken together our results indicate that blue LED lamps can be considered as a cheap and convenient tool for SARS-CoV-2 disinfection.

Influence of Visible Violet, Blue and Red Light on the Development of Cataract in Porcine Lenses

Background and Objectives: Cataract is a disease that is globally prevalent in today’s population and occurs mostly in the elderly. It is an opacity of the lens that worsens vision and can lead to blindness. One well-known risk factor of cataract is ultraviolet (UV) radiation. However, increasing exposure to modern artificial light sources like light emitting diodes (LEDs) and displays might have an impact on cataract formation due to possible high (and hidden) blue radiation. An ex-vivo study indicates that intense blue radiation causes cataract in porcine lenses. The goal of this work is the investigation whether violet or red light also lead to cataract formation in porcine lenses and to compare the impact of the different wavelengths. Materials and Methods: LEDs with wavelengths of 407 nm (violet), 463 nm (blue) and 635 nm (red) are used to irradiate ex–vivo porcine lenses with a dose of 6 kJ/cm². Before and after irradiation the lens transmissions are measured and dark field images are taken to determine cataract formation. The same procedure is performed for unirradiated controls. Results: The results of the transmission measurements are in accordance with the results of the dark field images and state that 635 nm (red) is inducing no or only weak cataract. In comparison to the dark field images the transmission measurements exhibit stronger cataract formation for 407 nm than for 463 nm irradiation while the dark field images show similar cataract formation for both wavelengths. Conclusions: Visible light of short wavelengths cause cataract formation in porcine eyes, and it cannot be excluded that these wavelengths, which are emitted by modern LED illuminants, also pose a danger to human eyes.

Review of Virus Inactivation by Visible Light

The COVID-19 pandemic is driving the search for new antiviral techniques. Bacteria and fungi are known to be inactivated not only by ultraviolet radiation but also by visible light. Several studies have recently appeared on this subject, in which viruses were mainly irradiated in media. However, it is an open question to what extent the applied media, and especially their riboflavin concentration, can influence the results. A literature search identified appropriate virus photoinactivation publications and, where possible, viral light susceptibility was quantitatively determined in terms of average log-reduction doses. Sensitivities of enveloped viruses were plotted against assumed riboflavin concentrations. Viruses appear to be sensitive to visible (violet/blue) light. The median log-reduction doses of all virus experiments performed in liquids is 58 J/cm2. For the non-enveloped, enveloped and coronaviruses only, they were 222, 29 and 19 J/cm2, respectively. Data are scarce, but it appears that (among other things) the riboflavin concentration in the medium has an influence on the log-reduction doses. Experiments with DMEM, with its 0.4 mg/L riboflavin, have so far produced results with the greatest viral susceptibilities. It should be critically evaluated whether the currently published virus sensitivities are really only intrinsic properties of the virus, or whether the medium played a significant role. In future experiments, irradiation should be carried out in solutions with the lowest possible riboflavin concentration.

Blue Laser Light Counteracts HSV-1 in the SH-SY5Y Neuronal Cell Model of Infection

Herpes simplex virus 1 (HSV-1) is wide-spread virus that triggers painful and recurrent infections, as herpes labialis, causing blister lesions on the lip. HSV-1 infection can be a lifelong condition starting from childhood due to the latency of the virus hidden in the trigeminal ganglia. Despite the use of antiviral treatments, there is not a resolutive cure for herpes. In our study, we tested blue light against HSV-1 in a neuronal cellular model, aimed at mimicking the neuronal tropism of HSV-1. Two laser protocols employing continuous wave and pulse modalities were delivered to infected cell cultures and to the virus alone. A significant reduction of viral replication was observed when the beam was directly applied to the virus, along with an increase in cell survival. Our findings, considering the limitation of the still-unknown mechanisms by which the blue light acts on the virus, suggested a potential use of photobiomodulation therapy for clinical applications against herpes labialis in pediatric patients.