Ibuprofen transport into and through skin from topical formulations: in vitro-in vivo comparison

Enhanced transdermal delivery of flurbiprofen via eutectic mixtures and novel terpene ester derivatives of L-amino acids

The present study aimed to evaluate the influence of chemical modifications on the properties of flurbiprofen derivatives, focusing particularly on their skin permeation and accumulation. Comprehensive characterization of all synthesized compounds was conducted using NMR, FTIR, and HRMS for structural analysis. Crystallinity was assessed via XRD, while thermal stability and properties were evaluated using TG and DSC, respectively. In addition, solubility in water, organic solvents, and PBS, as well as lipophilicity, were examined to better understand their physicochemical behavior. Biological properties were investigated through antioxidant and anti-inflammatory activity assessments, along with cytotoxicity evaluations. The study specifically tested a flurbiprofen salt, which combined the flurbiprofenate anion with the menthyl ester of the L-alanine cation. Comparisons were made with unmodified flurbiprofen to evaluate differences in skin permeability and accumulation. Several mixtures of individual substrates (L-alanine, menthol, and L-alanine menthyl ester hydrochloride) with flurbiprofen were also prepared, with some forming eutectic mixtures. Results indicated that both the eutectic mixtures and the flurbiprofen derivative, L-alaninium menthyl ester flurbiprofenate, exhibited significantly enhanced skin permeation and accumulation, reaching levels 1.5-2.5 times higher than unmodified flurbiprofen. These findings underscore the effectiveness of chemical modifications in improving flurbiprofen's transdermal delivery potential, especially via eutectic mixtures, which appear to play a critical role in enhancing skin permeability. Consequently, this study supports the potential of tailored chemical modifications in developing more effective and controlled transdermal therapies.

Unravelling the Risk of Poisoning From Nicotine-Containing Tobacco Products in Children Less Than Five Years of Age

For decades, young children in the United States have been accidentally poisoned by traditional tobacco products and the yearly incidence has slowly increased. More poisonings have accompanied the introduction of new products such as e-cigarettes and dissolvable tobacco, with renewed public attention. Using toxicological principles of human health risk assessment, published data from prior exposures, and information about the content and characteristics of specific products, I estimated the acute toxicological risk from exposure to various types and quantities of tobacco products for children <5 years old. Approximate reference levels for a non-lethal oral dose of nicotine were derived: A higher level potentially requiring medical care (0.2 mg per kg) and a lower level not potentially requiring medical care (0.04 mg per kg). A weight-based oral lowest lethal dose (LDLO) of 1-14 mg per kg in children <5 years old is estimated from the cited LDLOs in adults. I provide tables relating e-liquid concentration and volume to the oral LDLO in children <5 years old by weight and describing the amount of other tobacco products expected to result in lethality. Communications about safe storage practices should focus on the benefits of keeping any nicotine-containing product out of the reach of young children, and adults can be reminded to always reengage child-resistant closures on packages and call a poison center for accidental exposures. Healthcare providers, families, or any member of the public can also make reports about unexpected health or safety concerns related to tobacco products to the FDA using its online Safety Reporting Portal at https://www.fda.gov/TobaccoProducts/PublicHealthScienceResearch/ucm377563.htm. Tobacco products, particularly electronic nicotine delivery system (ENDS) liquids are highly toxic to children <5 years old in small amounts. Given that the concentration of nicotine in ENDS is 3 to 72 mg per mL, the lethal dose (LDLO) is expected to be 13-40 mL in a bottle containing a solution of 3 mg per mL liquid nicotine but may be as low as ½-2 mL in a bottle containing a highly concentrated solution of 72 mg per mL liquid nicotine. Features such as flow restrictors, child-resistant closures, and communication of safe storage practices to parents can help to lessen the morbidity and mortality from poisoning.

High-throughput screening identifies ibuprofen as an sEV PD-L1 inhibitor for synergistic cancer immunotherapy

Programmed death-ligand 1 (PD-L1) on tumor-derived small extracellular vesicles (sEVs) limits therapeutic effectiveness by interacting with the PD-1 receptor on host immune cells. Targeting the secretion of sEV PD-L1 has emerged as a promising strategy to enhance immunotherapy. However, the lack of small-molecule inhibitors poses a challenge for clinical translation. In this study, we developed a target and phenotype dual-driven high-throughput screening strategy that combined virtual screening with nanoflow-based experimental verification. We identified ibuprofen (IBP) as a novel inhibitor that effectively targeted sEV PD-L1 secretion. IBP disrupted the biogenesis and secretion of PD-L1+ sEVs in tumor cells by physically interacting with a critical regulator of sEV biogenesis, hepatocyte growth factor-regulated tyrosine kinase substrate. Notably, the mechanism of action of IBP is distinct from its commonly known targets, cyclooxygenases. Administration of IBP stimulated antitumor immunity and enhanced the efficacy of anti-PD-1 therapy in melanoma and oral squamous cell carcinoma mouse models. To address potential adverse effects, we further developed an IBP gel for topical application, which demonstrated remarkable therapeutic efficacy when combined with anti-PD-1 treatment. The discovery of this specific small inhibitor provides a promising avenue for establishing durable, systemic antitumor immunity.

Less efficient skin penetration of the metal allergen Pd2+ compared to Ni2+ and Co2+ from patch test preparations

BACKGROUND

Contrary to Ni2+- and Co2+-induced allergic contact dermatitis (ACD), reactions against Pd2+ are rare. However, Pd2+ activates a larger T cell fraction in vitro, suggesting an inefficient skin penetration.

OBJECTIVES

This study compares Ni2+, Co2+ and Pd2+ skin penetration from commonly used diagnostic patch test preparations (PTPs) and aqueous metal salt solutions.

METHODS

Using Franz diffusion cell assays, we applied the metals in PTPs (5% NiSO4, 1% CoCl2, 2% PdCl2 and 3% Na2PdCl4) and in solution to pigskin for 48 h, thereby mirroring the time frame of a patch test. The different compartments were analysed individually by inductively coupled plasma mass spectrometry.

RESULTS

Metal ions were mainly retained in the upper stratum corneum layers. After application of PTPs, concentrations in the viable skin were lower for Pd2+ (1 and 7 μM) compared to Ni2+ and Co2+ (54 and 17 μM).

CONCLUSIONS

Ni2+ and Co2+ penetrated the skin more efficiently than Pd2+ and thus may sensitize and elicit ACD more easily. This was observed for ions applied in petrolatum and aqueous solutions. We hypothesize that the differently charged metal complexes are responsible for the varying skin penetration behaviours.

Migration of polycyclic aromatic hydrocarbons from a polymer surrogate through the stratum corneum layer of the skin

In this study, we determined partition (K_sc/m) and diffusion (D_sc) coefficients of five different polycyclic aromatic hydrocarbons (PAH) migrating from squalane into and through the stratum corneum (s.c.) layer of the skin. Carcinogenic PAH have previously been detected in numerous polymer-based consumer products, especially those dyed with carbon black. Upon dermal contact with these products, PAH may penetrate into and through the viable layers of the skin by passing the s.c. and thus may become bioavailable. Squalane, a frequent ingredient in cosmetics, has also been used as a polymer surrogate matrix in previous studies. K_sc/m and D_sc are relevant parameters for risk assessment because they allow estimating the potential of a substance to become bioavailable upon dermal exposure. We developed an analytical method involving incubation of pigskin with naphthalene, anthracene, pyrene, benzo[a]pyrene and dibenzo[a,h]pyrene in Franz diffusion cell assays under quasi-infinite dose conditions. PAH were subsequently quantified within individual s.c. layers by gas chromatography coupled to tandem mass spectrometry. The resulting PAH depth profiles in the s.c. were fitted to a solution of Fick's second law of diffusion, yielding K_sc/m and D_sc. The decadic logarithm logK_sc/m ranged from -0.43 to +0.69 and showed a trend to higher values for PAH with higher molecular masses. D_sc, on the other hand, was similar for the four higher molecular mass PAH but about 4.6-fold lower than for naphthalene. Moreover, our data suggests that the s.c./viable epidermis boundary layer represents the most relevant barrier for the skin penetration of higher molecular mass PAH. Finally, we empirically derived a mathematical description of the concentration depth profiles that better fits our data. We correlated the resulting parameters to substance specific constants such as the logarithmic octanol-water partition coefficient logP, K_sc/m and the removal rate at the s.c./viable epidermis boundary layer.

Continuous Removal of Single Cell Layers by Tape Stripping the Stratum Corneum - a Histological Study

Studies on the penetration of toxicologically or pharmaceutically relevant substances through the skin and, more specifically, through the stratum corneum (s.c.) often rely on the well-established method of tape stripping. Tape stripping involves the removal of skin layers by means of adhesive tape, which is usually followed by quantification of dermally applied substances in these layers. However, the amount of s.c. removed by each individual tape strip is still a matter of scientific debate. While some studies imply that the amount of s.c. adhering to each tape strip decreases with increasing depth into the s.c., others observed a constant removal rate. All these studies rely on the quantification of the amount of s.c. captured on individual or pooled tape strips. Here, we present an approach whereby we measured the amount of s.c. remaining on excised porcine skin in the process of tape stripping. Staining and bloating of the s.c. allowed to measure its thickness and to count individual s.c. layers, respectively. Histologically, we show that the s.c. remaining on the skin decreased linearly as a function of strips taken. We found that each tape strip removes about 0.4µm of s.c., which corresponds to approximately one cellular layer. With a high coefficient of determination (r²>0.95), we were able to linearly correlate the thickness of the remaining s.c., the number of remaining cell layers and the number of tape strips applied. Furthermore, we elaborate on possible reasons for the discrepancies reported in the scientific literature regarding the amount of s.c. removed by each tape strip.

Hybrid Dissolving Microneedle-Mediated Delivery of Ibuprofen: Solubilization, Fabrication, and Characterization

Microneedles have recently emerged as a promising platform for delivering therapeutic agents by disrupting the skin, resulting in improved and high drug delivery via this route. Ibuprofen is widely used topically and orally for chronic pain conditions; to avoid untoward gastric effects, topical application is preferred over the oral route. This study aimed to enhance the solubility of the poorly water-soluble ibuprofen using Soluplus (SP) as a solubilizer and to fabricate dissolving microneedle patches of the drug. The fabricated patches were compared with marketed oral and topical formulations of ibuprofen. A 432-fold increase was observed in the solubility of the drug at 8% SP. The FTIR studies revealed that the drug and polymers were compatible. MNs were of uniform morphology and released the drug in a predictable manner. The in vivo analysis on healthy human volunteers revealed a Cmax of 28.7 µg/mL ± 0.5 with a T_max of 24 h and a MRT of 19.5 h, which was significantly higher than that observed for commercially available topical formulations. The prepared ibuprofen microneedles have higher bioavailability and MRT at a lower dose (165 µg) as compared to tablet and cream doses (200 mg).

Recent Options and Techniques to Assess Improved Bioavailability: In Vitro and Ex Vivo Methods

Bioavailability assessment in the development phase of a drug product is vital to reveal the disadvantageous properties of the substance and the possible technological interventions. However, in vivo pharmacokinetic studies provide strong evidence for drug approval applications. Human and animal studies must be designed on the basis of preliminary biorelevant experiments in vitro and ex vivo. In this article, the authors have reviewed the recent methods and techniques from the last decade that are in use for assessing the bioavailability of drug molecules and the effects of technological modifications and drug delivery systems. Four main administration routes were selected: oral, transdermal, ocular, and nasal or inhalation. Three levels of methodologies were screened for each category: in vitro techniques with artificial membranes; cell culture, including monocultures and co-cultures; and finally, experiments where tissue or organ samples were used. Reproducibility, predictability, and level of acceptance by the regulatory organizations are summarized for the readers.

In Vitro-In Vivo Correlations (IVIVC) for Predicting the Clinical Performance of Metronidazole Topical Creams Intended for Local Action

The safety and efficacy of a generic medicine can be confirmed by demonstrating bioequivalence (BE) between the generic product and its reference listed drug (RLD) by measuring drug concentrations in the blood following administration. However, for topical dermatological products that are not absorbed into the systemic circulation, clinical trials in patients are required. The objective of this investigation was to use an in vitro method to predict in vivo performance by correlating in vitro release testing (IVRT) data with tape stripping (TS) data following the application of metronidazole (MTZ) creams to the skin of healthy human participants. Whereas IVRT is generally used to characterize the release of a drug from topical products across a synthetic membrane into a suitable receptor medium, TS involves the sequential removal of layers of stratum corneum (SC) with an adhesive tape to determine the amount of the drug in the skin. The resulting IVRT and TS data were correlated using the IVRT parameter of the apparent release constant (ARC), which is the slope obtained from the release rate profile, with the TS parameter of the area under the curve (AUC) obtained from a plot of the amount of drug per tape strip vs. the relative SC depth. A rank order relationship for these parameters was established for the reference and test products. A graph of AUC vs. ARC was plotted to establish a Level C in vitro-in vivo correlation (IVIVC). Although the ARC for T₁ was slightly lower than that for the reference, the rank order was essentially consistent. A linear relationship was observed between the AUCs and ARCs. The equation derived was used to predict the AUCs for all the tested products based on their respective ARCs. The predicted AUC values based on the observed ARCs were similar to the observed AUCs. The lower and upper limits for the in vitro and in vivo parameters for BE were computed based on regulatory acceptance criteria. In order to predict BE from the IVRT studies, the values of the ARC should be between 30.50 and 47.67 when comparing test and reference cream products containing MTZ.

Development and Characterization of Cyclodextrin-Based Nanogels as a New Ibuprofen Cutaneous Delivery System

Nanogels combine the properties of hydrogels and nanocarrier systems, resulting in very effective drug delivery systems, including for cutaneous applications. Cyclodextrins (CDs) have been utilised to enhance the nanogels' loading ability towards poorly soluble drugs and promote/sustain drug release. However, formation of CD-based nanogels requires the use of specially modified CDs, or of crosslinking agents. The aim of this work was to develop a CD-based nanogel to improve the cutaneous delivery of ibuprofen by using the soluble β-cyclodextrin/epichlorohydrin polymer (EPIβCD) without adding any potentially toxic crosslinker. The use of EPIβCD enabled increasing ibuprofen loading due to its complexing/solubilizing power towards the poorly soluble drug and prolonging drug release over time due to the nanogel formation. DLS analysis proved that EPIβCD allowed the formation of nanostructures ranging from 60 up to 400 nm, depending on the gelling agent type and the gel preparation method. EPIβCD replacement with monomeric HPβCD did not lead in any case to nanogel formation. Permeation experiments using skin-simulating artificial membranes proved that the EPIβCD-based nanogel enhanced ibuprofen solubility and release, increasing its permeation rate up to 3.5 times, compared to a reference formulation without CD and to some commercial gel formulations, and also assured a sustained release. Moreover, EPIβCD replacement with HPβCD led to a marked increase in drug solubility and initial release rate, but did not provide a prolonged release due to the lack of a nano-matrix structure controlling drug diffusion.

Dermatokinetics: Advances and Experimental Models, Focus on Skin Metabolism

Numerous dermal contact products, such as drugs or cosmetics, are applied on the skin, the first protective barrier to their entrance into the organism. These products contain various xenobiotic molecules that can penetrate the viable epidermis. Many studies have shown that keratinocyte metabolism could affect their behavior by biotransformation. While aiming for detoxification, toxic metabolites can be produced. These metabolites may react with biological macromolecules often leading to sensitization reactions. After passing through the epidermis, xenobiotics can reach the vascularized dermis and therefore be bioavailable and distributed into the entire organism. To highlight these mechanisms, dermatokinetics, based on the concept of pharmacokinetics, has been developed recently. It provides information on the action of xenobiotics that penetrate the organism through the dermal route. The purpose of this review is first to describe and synthesize the dermatokinetics mechanisms to consider when assessing the absorption of a xenobiotic through the skin. We focus on skin absorption and specifically on skin metabolism, the two main processes involved in dermatokinetics. In addition, experimental models and methods to assess dermatokinetics are described and discussed to select the most relevant method when evaluating, in a specific context, dermatokinetics parameters of a xenobiotic. We also discuss the limits of this approach as it is notably used for risk assessment in the industry where scenario studies generally focus only on one xenobiotic and do not consider interactions with the rest of the exposome. The hypothesis of adverse effects due to the combination of chemical substances in contact with individuals and not to a single molecule are being increasingly studied and embraced in the scientific community.

Comparative Study of Polysaccharide-Based Hydrogels: Rheological and Texture Properties and Ibuprofen Release

Polysaccharides are attractive gelling agents in pharmacy due to their safety, biocompatibility, biodegradability, relatively easy way of preparation, and low price. Due to their variable physical-chemical properties, polysaccharides have potentialities to be used for designing new drug delivery systems for controlled drug release. In this comparative study, rheological and texture properties as well as the in vitro release of model drug ibuprofen (IBU) with 11 polysaccharide-based hydrogels were investigated. The in vitro release of IBU significantly differed between (i) neutral (hydroxy/alkylcelluloses), (ii) anionic (carboxyalkylcellulose and its sodium salt, tragacanth, carrageenan, xanthan gum), and (iii) cationic (chitosans) hydrogels due to different contribution of provided interactions and viscosity within the hydrogel groups. The drug release kinetics of each hydrogel system was evaluated for five kinetic models. Several combinations of cationic hydrogels with neutral or anionic ones were performed to illustrate possibilities of providing modified IBU release profiles. In this context, chitosan was presented as an effective modifier of diffusion profiles for negatively charged drugs formulated into combined polymeric systems, providing their prolonged release. The most appropriate hydrogel for the topical application (i.e., providing favorable rheological and texture properties along with the highest drug release) was selected from a studied series of polysaccharide-based hydrogels.

Transdermal Delivery Systems for Ibuprofen and Ibuprofen Modified with Amino Acids Alkyl Esters Based on Bacterial Cellulose

The potential of bacterial cellulose as a carrier for the transport of ibuprofen (a typical example of non-steroidal anti-inflammatory drugs) through the skin was investigated. Ibuprofen and its amino acid ester salts-loaded BC membranes were prepared through a simple methodology and characterized in terms of structure and morphology. Two salts of amino acid isopropyl esters were used in the research, namely L-valine isopropyl ester ibuprofenate ([ValOiPr][IBU]) and L-leucine isopropyl ester ibuprofenate ([LeuOiPr][IBU]). [LeuOiPr][IBU] is a new compound; therefore, it has been fully characterized and its identity confirmed. For all membranes obtained the surface morphology, tensile mechanical properties, active compound dissolution assays, and permeation and skin accumulation studies of API (active pharmaceutical ingredient) were determined. The obtained membranes were very homogeneous. In vitro diffusion studies with Franz cells were conducted using pig epidermal membranes, and showed that the incorporation of ibuprofen in BC membranes provided lower permeation rates to those obtained with amino acids ester salts of ibuprofen. This release profile together with the ease of application and the simple preparation and assembly of the drug-loaded membranes indicates the enormous potentialities of using BC membranes for transdermal application of ibuprofen in the form of amino acid ester salts.

Relating transdermal delivery plasma pharmacokinetics with in vitro permeation test (IVPT) findings using diffusion and compartment-in-series models

Increasing emphasis is being placed on using in vitro permeation test (IVPT) results for topical products as a surrogate for their in vivo behaviour. This study sought to relate in vivo plasma concentration - time pharmacokinetic (PK) profiles after topical application of drug products to IVPT findings with mechanistic diffusion and compartment models that are now widely used to describe permeation of solutes across the main skin transport barrier, the stratum corneum. Novel in vivo forms of the diffusion and compartment-in-series models were developed by combining their IVPT model forms with appropriate in vivo disposition functions. Available in vivo and IVPT data were then used with the models in data analyses, including the estimation of prediction intervals for in vivo plasma concentrations derived from IVPT data. The resulting predicted in vivo plasma concentration - time profiles for the full models corresponded closely with the observed results for both nitroglycerin and rivastigmine at all times. In contrast, reduced forms of these in vivo models led to discrepancies between model predictions and observed results at early times. A two-stage deconvolution procedure was also used to estimate the in vivo cumulative amount absorbed and shown to be linearly related to that from IVPT, with an acceptable prediction error. External predictability was also shown using a separate set of in vitro and in vivo data for different nitroglycerin patches. This work suggests that mechanistic and physiologically based pharmacokinetic models can be used to predict in vivo behaviour from IVPT data for topical products.

Digital Twins for Tissue Culture Techniques—Concepts, Expectations, and State of the Art

Techniques to provide in vitro tissue culture have undergone significant changes during the last decades, and current applications involve interactions of cells and organoids, three-dimensional cell co-cultures, and organ/body-on-chip tools. Efficient computer-aided and mathematical model-based methods are required for efficient and knowledge-driven characterization, optimization, and routine manufacturing of tissue culture systems. As an alternative to purely experimental-driven research, the usage of comprehensive mathematical models as a virtual in silico representation of the tissue culture, namely a digital twin, can be advantageous. Digital twins include the mechanistic of the biological system in the form of diverse mathematical models, which describe the interaction between tissue culture techniques and cell growth, metabolism, and the quality of the tissue. In this review, current concepts, expectations, and the state of the art of digital twins for tissue culture concepts will be highlighted. In general, DT’s can be applied along the full process chain and along the product life cycle. Due to the complexity, the focus of this review will be especially on the design, characterization, and operation of the tissue culture techniques.

Single dose pharmacokinetics of topical iodiconazole creams in healthy Chinese volunteers

1.In this study, the pharmacokinetics of new triazole antifungal iodiconzole creams at target sites after single-dose topical application was investigated.2.30 healthy Chinese volunteers were randomly divided into three groups after being stratified by sex, each group was given a single topical dose of 1%, 2%, 4% iodiconazole cream (0.4 g). Stratum corneum (SC) samples of treated sites were collected by tape-stripping method after the chosen contact times, and were extracted and analysed by a validated LC-MS method.3.After single-dose topical application of 1%, 2%, 4% iodiconazole creams, the C_max of iodiconazole in SC was 1.2 ± 0.7, 2.2 ± 1.0, 2.4 ± 1.0 mg/g; T_max was 3.3 ± 1.1, 2.9 ± 1.1, 3.8 ± 0.4 h; t_1/2 was 6.6 ± 3.4 h, 7.2 ± 4.1 h, 5.9 ± 2.9 h; AUC_0-t was 10.9 ± 3.0, 20.8 ± 10.4, 20.9 ± 7.9 mg·h/g; AUC_0-∞ was 11.6 ± 2.9, 23.5 ± 14.4, 22.2 ± 8.9 mg·h/g, respectively. The results showed that C_max, AUC_0-t and AUC_0-∞ did not increase proportionately with dose, which could also be due to the drug being saturated in the formulation at ∼2%.4.The results of this study could provide reference for the clinical medication and further study of the formulations.

Pharmacokinetics and pharmacodynamics in the treatment of cutaneous leishmaniasis - challenges and opportunities

Pharmacological efficacy is obtained when adequate concentrations of a potent drug reach the target site. In cutaneous leishmaniasis, a heterogeneous disease characterised by a variety of skin manifestations from simple nodules, skin discoloration, plaques to extensive disseminated forms, the parasites are found in the dermal layers of the skin. Treatment thus involves the release of the active compound from the formulation (administered either topically or systemically), it's permeation into the skin, accumulation by the local macrophages and further transport into the phagolysosome of the macrophage. The pharmacodynamic activity of a drug against the parasite is relatively straight forward to evaluate both in vivo and in vitro. The pharmacokinetic processes taking place inside the skin are more complex to elucidate due to the multi-lamellar structure of the skin, heterogeneous distribution of drugs within the tissue, the difficulty of accessing the site of infection complicating sampling and the lack of surrogate markers reflecting the activity of a drug in the skin. This review will discuss the difficulties encountered when investigating drug distribution, PK PD relationships and efficacy in the skin with a focus on cutaneous leishmaniasis treatment.

Influence of skin furrows on tape stripping in characterizing the depth of skin penetration

The stratum corneum (SC), the outermost layer of the skin and its major barrier for penetration, contains furrows of different depths on its surface. The presence of these furrows might lead to erroneous interpretation of the results in skin permeation studies using tape stripping, in which the material trapped in the furrows removed by the tapes representing different layers of the SC might be interpreted as material penetrating within these layers. The present objective was to investigate the effect of skin furrows on tape stripping results. Non-penetrating fluorescent materials were topically applied to split-thickness human and full-thickness porcine skin samples. Tape stripping was applied, and the tapes were assessed by fluorescence microscopy and quantitative analyses. The microscopy images were assessed visually to determine the presence of the applied material in the furrows. The penetration depth of the material was examined and the fluorescence content and pattern in each tape were analyzed. The results suggested that skin furrows could be important in the first 10 tapes, affecting the quantification of materials in the SC, particularly in permeation studies of materials with low penetration into the SC. Depending on the properties of the materials, skin rinsing could reduce the impact of furrows.

Novel Approach for the Bioequivalence Assessment of Topical Cream Formulations: Model-Based Analysis of Tape Stripping Data Correctly Concludes BE and BIE

PURPOSE

The purpose of this study was (a) to suggest a novel dermatopharmacokinetic (DPK) approach from which pharmacokinetic parameters relevant to the bioequivalence (BE) assessment of a topical formulation can be deduced while circumventing the need for numerous measurements and assumptions, and (b) to investigate whether this approach enables the correct conclusion of BE and bioinequivalence (BIE).

METHODS

Bioequivalent and bioinequivalent formulations of acyclovir were compared versus a reference product (Zovirax®). Tape Stripping was conducted at only one dose duration during the uptake phase to generate drug content in stratum corneum versus time profiles, each time point corresponding to one stripped layer. Nonlinear mixed effect modeling (ADAPT5®) (MLEM algorithm) was used to fit the DPK data and to estimate the rate (K_in) and extent (F_S) of drug absorption/input into the skin. Results were evaluated using the average BE approach.

RESULTS

Estimated exposure metrics were within the usual BE limits for the bioequivalent formulation (F_S: 102.4 [90%CI: 97.5-107.7]; K_in: 94.2 [90%CI: 83.7-106.0]), but outside those limits for the bioinequivalent formulation (F_S: 43.4 [90%CI: 27.9-67.6]; K_in: 54.5 [90%CI: 36.6-81.1]).

CONCLUSIONS

The proposed novel DPK approach was shown to be successful, robust and applicable to assess BE and BIE correctly between topical formulations.

Evaluation of topical econazole nitrate formulations with potential for treating Raynaud's phenomenon

The purpose of this work was to design and characterize a topical formulation of econazole nitrate (EN) with potential for treating Raynaud's phenomenon (RP). Four topical dosage forms (F1_topical solution, F2_HPMC or hydroxypropyl methylcellulose dispersion, F3_VersaBase^® cream, and F4_{_}Lipoderm^® Activemax™ Cream) containing 3% w/w EN were prepared and characterized for drug content, pH, viscosity, spreadability, drug crystallinity, stability, and in vitro permeation using Franz cells across pig ear skin, and results were compared to the 1% marketed EN cream. All four formulations had acceptable physical and visual characteristics required for topical application, with 3% w/w EN. The order of amount of drug permeated from highest to lowest was F2 (10.27%) > F4 (2.47%) > F1 (2.28%) > F3 (1.47%) > marketed formulation (0.22%). Formulation F2 showed better penetration of the drug into the stratum corneum, epidermis, and dermis layers. The drug concentration in the stratum corneum and epidermis was approximately 10-20 times higher with F2 compared to the marketed formulation. All formulations were found to be stable for up to 6 months. All four EN formulations were found to be better than the 1% marketed cream. Formulation F2_{_}HPMC dispersion could be further explored as a treatment option for RP.

In vitro and ex vivo studies on diltiazem hydrochloride-loaded microsponges in rectal gels for chronic anal fissures treatment

Diltiazem hydrochloride, topically applied at 2% concentration, is considered effective for the treatment of chronic anal fissures, although it involves several side effects among which anal pruritus and postural hypotension. To test the hypothesis that a sustained delivery system of diltiazem hydrochloride may be helpful for the treatment of chronic anal fissures, in the present study we evaluated the potential of gels containing diltiazem hydrochloride entrapped in microsponges. Such microsponges were based on Eudragit RS 100 and the effect of some formulation variables was assessed by a 2³ full factorial screening design. An optimized formulation of diltiazem hydrochloride microsponges was dispersed in Methylcellulose 2% or Poloxamer 407 20% and the resulting gels (micro-l-diltiazem hydrochloride 2%) were subjected to in vitro drug release, ex vivo permeability and drug deposition after application on porcine rectal mucosa. The results showed a prolonged release up to 24 h from micro-l-diltiazem hydrochloride at 2% in the gels. The permeation tests revealed up to 18% higher drug retention on the mucosal tissue after 24 h by the micro-l-diltiazem hydrochloride 2% gels compared to conventional diltiazem hydrochloride gels at 2%. These results suggest that diltiazem hydrochloride-loaded microsponges dispersed in rectal gels may be useful to overcome some limitations of conventional local chronic anal fissure therapy.

Study on montmorillonite-chlorhexidine acetate-terbinafine hydrochloride intercalation composites as drug release systems

This paper focuses on the intercalation of chlorhexidine acetate (CA) and terbinafine hydrochloride (TBH) into montmorillonite as sustained release drug carriers. The intercalation compounds were characterized by X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, and thermogravimetric analysis (TGA). The basal spacing of montmorillonite increased from 1.23 to 2.97 nm. It was confirmed that CA and TBH molecules were well-stabilized in the interlayer space of clay via mono-, double or triplicate layer stacking. The adsorption amounts and molecular structures of CA and TBH appeared to depend on the cation exchange capacity of MMT, which in turn, tailored the drug release patterns. In vitro release tests of MMT-CA-TBH in 0.9 wt% NaCl solution at 37 °C show a biphasic and sustained profile of CA and TBH ion release. After release, dissolution-diffusion kinetic models were fitted. The mechanism of MMT-CA-TBH release is probably due to surface diffusion and bulk diffusion via ionic exchange of MMT ions on or in the MMT with ions in the NaCl solution. The in vitro release experiments revealed that CA and TBH were released from MMT steadily, depending on the cooperation between the drugs themselves and the electrostatic interactions between the drugs and MMT. It was found that the cross-linking ratio increased due to a decrease in the free volume available for diffusion.

Application of an Optimized Tape Stripping Method for the Bioequivalence Assessment of Topical Acyclovir Creams

This study indicates the application of tape stripping (TS) for bioequivalence (BE) assessment of a topical cream product containing 5% acyclovir. A TS method, previously used successfully to assess BE of topical clobetasol propionate and clotrimazole formulations, was used to assess BE of an acyclovir cream (5%) formulation as well as a diluted acyclovir formulation (1.5%) applied to the skin of healthy humans. An appropriate application time was established by conducting a dose duration study using the innovator product, Zovirax® cream. Transepidermal water loss was measured and used to normalize thicknesses between subjects. The area under the curve (AUC) from a plot of amount of acyclovir/strip vs cumulative fraction of stratum corneum (SC) removed was calculated for each application site. BE was assessed using Fieller's theorem in accordance with FDA's guidance for assessment of BE of topical corticosteroids. Adco-acyclovir cream (5%) was found to be BE to Zovirax® cream, where the mean test/reference (T/R) ratio of the AUC's was 0.96 and the bioequivalence interval using a 90% confidence interval was 0.91-1.01 with a statistical power > 95%, whereas the diluted test product fell outside the BE acceptance criteria with T/R ratio of AUC of 0.23 and a 90% CI of 0.20-0.26. This study indicates that the data resulting from the application of this TS procedure has reinforced the potential for its use to assess BE of topical drug products intended for local action, thereby obviating the necessity to undertake clinical trials in patients.

Is the Skin Absorption of Hydrocortisone Modified by the Variability in Dosing Topical Products?

Fingertip units have been proposed as a tool to standardize topical therapy with semisolid formulations. However, no studies to date have characterized the variability in dosing by patients using this concept and whether this variability ultimately affects the topical absorption of drugs. This work aimed to answer these two questions. A first study determined the dose measured, the area of spread and the area-normalized dose for a 1% hydrocortisone cream and ointment applied by members of the public using this dosing approach before and after brief counselling. Then, in vivo tape-stripping and in vitro permeation studies investigated whether the variability in the area-normalized dose altered the skin absorption of hydrocortisone. Participants applied greater doses and spread them over larger areas after a short counselling intervention leading to smaller area-normalized doses. In vivo hydrocortisone uptake by the stratum corneum was significantly greater for the higher normalized dose and the differences were further supported by the in vitro permeation studies. However, these differences were relatively small and not proportional to the increase in normalized dose. This work shows that, following brief advice, patients and carers can apply consistent and sufficient doses of corticosteroids whilst minimizing risks and variability in hydrocortisone absorption.

Topical Administration of Ibuprofen for Injured Athletes: Considerations, Formulations, and Comparison to Oral Delivery

Non-steroidal anti-inflammatory drugs (NSAIDs) are a class of drugs commonly used to treat both the acute and chronic injuries sustained by athletes during training and competition. In many parts of the world, NSAIDs can be purchased over-the-counter and used without any physician oversight. However, the chronic nature of overuse injuries requires NSAIDs to be taken orally for an extended period of time. As a result, they can have significant adverse effects on athletes, namely gastrointestinal (GI), renal, and cardiovascular damage. Dyspepsia and upper GI ulceration and bleeding are of great concern in chronic NSAID use, and as such oral NSAIDs are generally contraindicated in those with a history of peptic ulcers or irritable bowel disease. In the setting of chronic overuse soft tissue or joint disease, topically administered NSAIDs offer an alternate route of administration that has the potential to deliver a similar level of pain and anti-inflammatory relief while bypassing the harmful side effects associated with oral intake. Topically applied NSAIDs are able to achieve high concentrations within the targeted site of action while simultaneously keeping plasma concentrations low, offering several advantages over oral administration. One commonly used generic NSAID is ibuprofen (2-(4-isobutylphenyl)propanoic acid). First synthesized in the 1960s, ibuprofen has since become widely available as an over-the-counter pharmaceutical. In this review, we outline new and different techniques that have been used to deliver ibuprofen into diseased tissues, including supersaturations, microemulsions, gels, nanosystems, and microneedles. We also review relevant clinical trials comparing transdermally delivered ibuprofen to placebo and orally administered ibuprofen.

Going skin deep: A direct comparison of penetration potential of lipid-based nanovesicles on the isolated perfused human skin flap model

Phospholipid-based nanocarriers are attractive drug carriers for improved local skin therapy. In the present study, the recently developed isolated perfused human skin flap (IPHSF) model was used to directly compare the skin penetration enhancing potential of the three commonly used nanocarriers, namely conventional liposomes (CLs), deformable liposomes (DLs) and solid lipid nanoparticles (SLNs). Two fluorescent markers, calcein (hydrophilic) or rhodamine (lipophilic), were incorporated individually in the three nanosystems. The nanocarrier size ranged between 200 and 300nm; the surface charge and entrapment efficiency for both markers were dependent on the lipid composition and the employed surfactant. Both carrier-associated markers could not penetrate the full thickness human skin, confirming their suitability for dermal drug delivery. CLs exhibited higher retention of both markers on the skin surface compared to DLs and SLNs, indicating a depo formation. DLs and SLNs enabled the deeper penetration of the two markers into the skin layers. In vitro and ex vivo skin penetration studies performed on the cellophane membrane and full thickness pig/human skin, respectively, confirmed the findings. In conclusion, efficient dermal drug delivery can be achieved by optimization of a lipid nanocarrier on the suitable skin-mimicking model to assure system's accumulation in the targeted skin layer.

Skin penetration and tissue permeation after topical administration of diclofenac

OBJECTIVE

Topical delivery of drugs is an alternative to oral administration, often with similar efficacy but potentially a more favorable tolerability profile. However, topical formulations need to be able to penetrate the skin and permeate to the target areas in quantities sufficient to exert a therapeutic effect. Many factors can affect this process, including the physicochemical properties of the drug, the formulation used, and the site and mode of application. It is believed that measurement of drug concentrations at the sites of action may be an indicator of their likely efficacy. This review addresses these issues, with reference to topically administered diclofenac in osteoarthritis.

METHODS

Articles relevant to this review were identified after a systematic search of Medline and Embase, using the key words "diclofenac", "topical administration" and "osteoarthritis" in the search strategy.

RESULTS

The sparse data available indicate that topical diclofenac can penetrate and permeate to deeper tissues, with a lower plasma to tissue ratio than oral diclofenac. The tissue diclofenac levels after topical delivery are sustained over time (at least several hours). However, there is not enough data to establish how diclofenac levels in the joint compare with IC₅₀ levels (50% of the maximum inhibition of prostaglandin synthesis) established following oral administration.

CONCLUSIONS

After topical application, diclofenac can penetrate the skin and permeate to deeper tissues, where it reaches a concentration that appears to be sufficient to exert a therapeutic effect. More robust methods are required for in vivo characterization to better estimate the clinical efficacy of topically applied drugs.

Critical quality attributes, in vitro release and correlated in vitro skin permeation-in vivo tape stripping collective data for demonstrating therapeutic (non)equivalence of topical semisolids: A case study of "ready-to-use" vehicles

This work aimed to prove the ability of "ready-to-use" topical vehicles based on alkyl polyglucoside-mixed emulsifier (with/without co-solvent modifications) to replace the conventionally used pharmacopoeial bases (e.g., non-ionic hydrophilic cream) in compounding practice. For this purpose, considering the regulatory efforts to establish alternative, scientifically valid methods for evaluating therapeutic equivalence of topical semisolids, we performed a comparative assessment of microstructure, selected critical quality attributes (CQAs) and in vitro/in vivo product performances, by utilizing aceclofenac as a model drug. The differences in composition between investigated samples have imposed remarkable variances in monitored CQAs (particularly in the amount of aceclofenac dissolved, rheological properties and water distribution mode), reflecting the distinct differences in microstructure formed, as partially observed by polarization microscopy and confocal Raman spectral imaging. Although not fully indicative of the in vivo performances, in vitro release data (vertical diffusion vs. immersion cells) proved the microstructure peculiarities, asserting the rheological properties as decisive factor for obtained liberation profiles. Contrary, in vitro permeation results obtained using pig ear epidermis correlated well with in vivo dermatopharmacokinetic data and distinguished unequivocally between tested formulations, emphasizing the importance of skin/vehicle interactions. In summary, suggested multi-faceted approach can provide adequate proof on topical semisolids therapeutic equivalence or lack thereof.

Ibuprofen loaded nano-ethanolic liposomes carbopol gel system: in vitro characterization and anti-inflammatory efficacy assessment in Wistar rats

The objective of the present study was to develop and characterize nano-ethanolic liposomes (NEL) for transdermal delivery of ibuprofen (IBU). The NEL for transdermal delivery of IBU were prepared by thin film hydration technique and evaluated for vesicle size, shape, entrapment efficiency, transdermal flux, and in vivo anti-inflammatory activity in Wistar rats. The NEL optimized formulation (NEL-Opt) presented vesicle sizes of 32.85±1.98 nm and entrapment efficiency of 86.40±0.55% with improved transdermal flux. The presence of ethanol and flexibility of NEL could be the reasons for better permeation enhancement of IBU via rat’s skin. In vivo anti-inflammatory study of IBU-loaded NEL-Opt gel showed significant reduction (41.18%) of edema in carrageenan-induced rat paw edema as compared to conventional gel of IBU, where reduction of edema was found to be 12.50%. Our results suggest that developed NEL formulations are efficient systems for transdermal IBU delivery against inflammation. The stability study confirmed that the NEL-Opt gel formulation was considerably stable at refrigerator temperature. Our results concluded that NEL are an efficient carrier for transdermal delivery of IBU.

Bioequivalence Methodologies for Topical Drug Products: In Vitro and Ex Vivo Studies with a Corticosteroid and an Anti-Fungal Drug

OBJECTIVE

To examine whether in vitro and ex vivo measurements of topical drug product performance correlate with in vivo outcomes, such that more efficient experimental approaches can be reliably and reproducibly used to establish (in)equivalence between formulations for skin application.

MATERIALS AND METHODS

In vitro drug release through artificial membranes, and drug penetration into porcine skin ex vivo, were compared with published human in vivo studies. Two betamethasone valerate (BMV) formulations, and three marketed econazole nitrate (EN) creams were assessed.

RESULTS

For BMV, the stratum corneum (SC) uptake of drug in 6 h closely matched data observed in vivo in humans, and distinguished between inequivalent formulations. SC uptake of EN from the 3 creams mirrored the in vivo equivalence in man (both clinically and via similar tape-stripping experiments). However, EN clearance from SC ex vivo did not parallel that in vivo, presumably due to the absence of a functioning microcirculation. In vitro release of BMV from the different formulations did not overlap with either ex vivo or in vivo tape-stripping data whereas, for EN, a good correlation was observed. No measurable permeation of either BMV or EN was detected in a 6-h in vitro skin penetration experiment.

CONCLUSIONS

In vitro and ex vivo methods for topical bioequivalence determination can show correlation with in vivo outcomes. However, these surrogates have understandable limitations. A "one-size-fits-all" approach for topical bioequivalence evaluation may not always be successful, therefore, and the judicious use of complementary methods may prove a more effective and reliable strategy.

Covalently-controlled drug delivery via therapeutic methacrylic tissue adhesives

Therapeutic methacrylic (TMA) monomers lend local, covalently-controlled release of therapeutics, tunable mechanical properties, and increased cytocompatibility to cyanoacrylate medical adhesives.

Drug permeation and barrier damage in Leishmania-infected mouse skin

OBJECTIVES

Pathological disorder can disrupt the barrier integrity of the skin, thereby altering the drug delivery from topical formulations to the target site. Cutaneous leishmaniasis (CL) is an infection of the dermal layers of the skin and manifests as a variety of skin lesions from defined nodular forms to plaques and chronic ulcers. The aim of this work was to characterize the physiology and barrier integrity of the Leishmania-infected BALB/c mouse skin and how they impacted delivery of drugs into the skin.

METHODS

A histological evaluation of the structural differences between uninfected and infected skin was performed using haematoxylin/eosin, elastic Van Gieson and Iba-1 stains. As a CL nodule developed and progressed, the skin pH, hydration and trans-epidermal water loss (TEWL) were recorded. Finally, Franz diffusion cells were used to evaluate the influence of the infection on drug delivery through the skin.

RESULTS

We found: (i) structural changes in both the epidermal and dermal layers due to the ingress of inflammatory cells, as shown by immunohistochemistry; (ii) a significant increase in TEWL; and (iii) significantly higher permeation of the model permeants caffeine and ibuprofen and the antileishmanial drugs buparvaquone and paromomycin, for Leishmania-infected skin compared with uninfected skin. The infection had no measurable influence on skin pH and hydration.

CONCLUSIONS

We report profound changes in the skin barrier physiology, function and permeability to drugs of Leishmania-infected skin.

Ionisation effects on the permeation of pharmaceutical compounds through silicone membrane

Silicone membrane is frequently used as an in vitro skin mimic whereby experiments incorporate a range of buffered media which may vary in pH. As a consequence of such variability in pH there is a corresponding variability in the degree of ionisation which in turn, could influence permeation through the mainly hydrophobic-rich membrane structure. This study reports the effect of pH on the permeation of five model compounds (benzoic acid, benzotriazole, ibuprofen, ketoprofen and lidocaine). For the five compounds analysed, each at three distinct percentages of ionisation, it was found that the greater extent of permeation was always for the more 'neutral', i.e. more greatly unionised, species rather than the anionic or cationic species. These findings fit with the theory that the hydrophobic membrane encourages permeation of 'lipid-like' structures, i.e. the more unionised form of compounds. However, results obtained with an Inverse Gas Chromatography Surface Energy Analyser (iGC SEA) indicate the membrane surface to be an electron dense environment. In the knowledge that unionised forms of compounds permeate (rather than the charged species) this negatively charged surface was not anticipated, i.e. the basic membrane surface did not appear to affect permeation.

Novel nanostructured supramolecular hydrogels for the topical delivery of anionic drugs

A bis-imidazolium-based amphiphilic molecule was used to form novel supramolecular gels in ethanol-water mixtures. The proportion of solvents, the concentration of gellant and the temperature are factors that strongly influence the gelling process. The physical gels that are formed comprise entangled fibers of around 100nm in diameter, able to incorporate anionic drugs, whose morphology varies depending on the drug they incorporate. These hydrogels are soft and therefore optimum for skin application. They show good stability when compared to previously reported gels. Suitable drug release and skin permeation profiles were obtained, and, moreover, they seem to promote the retention of the drug inside the skin. Finally, effective in vivo anti-inflammatory activity was observed, especially with the indomethacin-incorporated gel, which indicates that these supramolecular hydrogels are a good option for the delivery of poor water soluble drugs for the treatment of acute inflammation or other skin diseases.

Mathematical models for dermal drug absorption

INTRODUCTION

Mathematical models of dermal transport offer the advantages of being much faster and less expensive than in vitro or in vivo studies. The number of methods used to create such models has been increasing rapidly, probably due to the steady rise in computational power. Although each of the various approaches has its own virtues and limitations, it may be difficult to decide which approach is best suited to address a given problem.

AREAS COVERED

Here we outline the basic ideas, drawbacks and advantages of compartmental and quantitative structure-activity relationship models, as well as of analytical and numerical approaches for solving the diffusion equation. Examples of special applications of the different approaches are given.

EXPERT OPINION

Although some models are sophisticated and might be used in future to predict transport through damaged or diseased skin, the comparatively low availability of suitable and accurate experimental data limits extensive usage of these models and their predictive accuracy. Due to the lack of experimental data, the possibility of validating mathematical models is limited.

Quantification of uptake and clearance of acyclovir in skin layers

BACKGROUND

Quantification of drug uptake and clearance in the skin layers could provide better insight into the skin kinetics of dermatological formulations aimed for deeper skin tissues. This study assessed the skin kinetics of acyclovir in different skin layers following topical application on the abdominal region of Wistar rats.

METHODS

In vivo skin pharmacokinetics parameters were determined by two different protocols such as post drug load assessment and subsequent drug load assessment following topical application of 500 mg of cream formulation containing 5% (w/w) of acyclovir.

RESULTS

Topical application of acyclovir exhibited concentration gradient between the skin layers (stratum corneum > viable epidermis > dermis) which were inconsistent over the time-course of the study. The rate and extent of drug reaching target site (basal epidermis) was relatively low. The drug uptake and clearance profiles were found to be distinct in all the three skin layers suggesting no drug concentration correlation (P<0.05) between skin layers. Drug concentration in the viable epidermis continued to increase even after termination of therapy (Tmax=4 h) and then declined rapidly. The availability of acyclovir in the target was comparatively low (approximately 0.4% of the applied dose) although an order of magnitude higher percentage was determined in the stratum corneum.

CONCLUSIONS

The data observed in this study demonstrates low skin uptake and rapid clearance of acyclovir in the target site. Further, the methodology employed can be useful for studying other topical antiviral agents as well as for optimizing formulations for drugs (such as acyclovir) that may enhance their efficacy.

A strategy for in-silico prediction of skin absorption in man

For some time, in-silico models to address substance transport into and through the skin are gaining more and more importance in different fields of science and industry. In particular, the mathematical prediction of in-vivo skin absorption is of great interest to overcome ethical and economical issues. The presented work outlines a strategy to address this problem and in particular, investigates in-vitro and in-vivo skin penetration experiments of the model compound flufenamic acid solved in an ointment by means of a mathematical model. Experimental stratum corneum concentration-depth profiles (SC-CDP) for various time intervals using two different in-vitro systems (Franz diffusion cell, Saarbruecken penetration model) were examined and simulated with the help of a highly optimized three compartment numerical diffusion model and compared to the findings of SC-CDPs of the in-vivo scenario. Fitted model input parameters (diffusion coefficient and partition coefficient with respect to the stratum corneum) for the in-vitro infinite dose case could be used to predict the in-use conditions in-vitro. Despite apparent differences in calculated partition coefficients between in-vivo and in-vitro studies, prediction of in-vivo scenarios from input parameters calculated from the in-vitro case yielded reasonable results.

Liposomes for (trans)dermal drug delivery: the skin-PVPA as a novel in vitro stratum corneum model in formulation development

Penetration potential of vesicles destined for trans(dermal) administration remains to be of great interests both in respect to drug therapy and cosmetic treatment. This study investigated the applicability of the phospholipid vesicle-based permeation assay (PVPA) as a novel in vitro skin barrier model for screening purposes in preformulation studies. Various classes of liposomes containing hydrophilic model drug were examined, including conventional liposomes (CLs), deformable liposomes (DLs) and propylene glycol liposomes (PGLs). The size, surface charge, membrane deformability and entrapment efficiency were found to be affected by the vesicle lipid concentration, the presence of the surfactant and propylene glycol. All liposomes exhibited prolonged drug release profiles with an initial burst effect followed by a slower release phase. The permeation of the drug from all of the tested liposomes, as assessed with the mimicked stratum corneum--PVPA model, was significantly enhanced as compared to the permeability of the drug in solution form. Although the DLs and the PGLs exhibited almost the same membrane elasticity, the permeability of the drug delivered by PGLs was higher (6.2 × 10⁻⁶ cm/s) than DLs (5.5 × 10⁻⁶ cm/s). Therefore, this study confirmed both the potential of liposomes as vesicles in trans(dermal) delivery and potential of the newly developed skin-PVPA for the screening and optimization of liposomes at the early preformulation stage.

Mathematical model to predict skin concentration after topical application of drugs

Skin permeation experiments have been broadly done since 1970s to 1980s as an evaluation method for transdermal drug delivery systems. In topically applied drug and cosmetic formulations, skin concentration of chemical compounds is more important than their skin permeations, because primary target site of the chemical compounds is skin surface or skin tissues. Furthermore, the direct pharmacological reaction of a metabolically stable drug that binds with specific receptors of known expression levels in an organ can be determined by Hill's equation. Nevertheless, little investigation was carried out on the test method of skin concentration after topically application of chemical compounds. Recently we investigated an estimating method of skin concentration of the chemical compounds from their skin permeation profiles. In the study, we took care of "3Rs" issues for animal experiments. We have proposed an equation which was capable to estimate animal skin concentration from permeation profile through the artificial membrane (silicone membrane) and animal skin. This new approach may allow the skin concentration of a drug to be predicted using Fick's second law of diffusion. The silicone membrane was found to be useful as an alternative membrane to animal skin for predicting skin concentration of chemical compounds, because an extremely excellent extrapolation to animal skin concentration was attained by calculation using the silicone membrane permeation data. In this chapter, we aimed to establish an accurate and convenient method for predicting the concentration profiles of drugs in the skin based on the skin permeation parameters of topically active drugs derived from steady-state skin permeation experiments.