Rupture Forces among Human Blood Platelets at different Degrees of Activation

Platelet-Rich Plasma-Embedded Porous Polycaprolactone Film with a Large Surface Area for Effective Hemostasis

BACKGROUND

Uncontrollable and widespread bleeding caused by surgery or sudden accidents can lead to death if not treated with appropriate hemostasis. To prevent excessive life-threatening bleeding, various hemostatic agents based on polymeric biomaterials with various additives for accelerated blood coagulation have been adopted in clinical fields. In particular, platelet-rich plasma (PRP), which contains many blood coagulation factors that can accelerate blood clot formation, is considered as one of the most effective hemostatic additives.

METHODS

We investigated a PRP-embedded porous film using discarded (expired) PRP and a film with a leaf-stacked structure (FLSS), as a hemostatic agent to induce rapid hemostasis. The film, which contained an LSS on one side (PCL-FLSS), was fabricated by a simple heating-cooling technique using tetraglycol and polycaprolactone (PCL) film. Activated PRP was obtained by the thawing of frozen PRP at the end of its expiration date (the platelet cell membrane is disrupted during the freezing and thawing of PRP, thus releasing various coagulation factors) and embedded in the PCL-FLSS (PRP-FLSS).

RESULTS

From in vitro and in vivo experiments using a rat hepatic bleeding model, it was recognized that PRP-FLSS is not only biocompatible but also significantly accelerates blood clotting and thus prevents rapid bleeding, probably due to a synergistic effect of the sufficient supply of various blood coagulants from activated PRP embedded in the LSS layer and the large surface area of the LSS itself.

CONCLUSION

The study suggests that PRP-FLSS, a combination of a porous polymer matrix with a unique morphology and discarded biofunctional resources, can be an advanced hemostatic agent as well as an upcycling platform to avoid the waste of biofunctional resources.

The use of scanning electron microscopy and fixation methods to evaluate the interaction of blood with the surfaces of medical devices

Testing the hemocompatibility of medical devices after their interaction with blood entails the need to evaluate the activation of blood elements and the degree of their coagulation and adhesion to the device surface. One possible way to achieve this is to use scanning electron microscopy (SEM). The aim was to develop a novel SEM-based method to assess the thrombogenic potential of medical devices and their adhesiveness to blood cells. As a part of this task, also find a convenient procedure of efficient and non-destructive sample fixation for SEM while reducing the use of highly toxic substances and shortening the fixation time. A polymeric surgical mesh was exposed to blood so that blood elements adhered to its surface. Such prepared samples were then chemically fixed for a subsequent SEM measurement; a number of fixation procedures were tested to find the optimal one. The fixation results were evaluated from SEM images, and the degree of blood elements' adhesion was determined from the images using ImageJ software. The best fixation was achieved with the May-Grünwald solution, which is less toxic than chemicals traditionally used. Moreover, manipulation with highly toxic osmium tetroxide can be avoided in the proposed procedure. A convenient methodology for SEM image analysis has been developed too, enabling to quantitatively evaluate the interaction of blood with the surfaces of various medical devices. Our method replaces the subjective assessment of surface coverage with a better-defined procedure, thus offering more precise and reliable results.

Force balance ratio is a robust predictor of arterial thrombus stability

Thrombus formation on a damaged vessel wall can lead to the formation of a stable occlusive/subocclusive clot or unstable embolizing thrombus. Both outcomes can cause significant health damage. The mechanisms that regulate maximum thrombus size, its stability, and embolization in both micro- and macrocirculation are poorly understood. To investigate the impact of flow and intrathrombus forces on the stability of homogeneous and heterogeneous platelet thrombi in a wide range of thrombus geometries, critical interplatelet forces, vessel diameters, and hydrodynamic conditions, we took advantage of the recently developed in silico models. To perform analysis of thrombus stability/embolization in arterioles, we used our previously developed particle-based 2D model with a single-platelet resolution. Its results and predictions were further extended to a 3D case and the large spatial scales of arteries using novel particle-based and continuum 3D models. We found a robust quantitative parameter, termed force balance ratio, which quantifies the balance between destabilizing hydrodynamic and stabilizing interplatelet forces. This parameter predicts whether a homogeneous thrombus (or the shell of a heterogeneous thrombus) with a particular value of critical interplatelet forces will embolize under given hydrodynamic conditions. Our simulations also predict that, for a given magnitude of critical interplatelet forces, the longer thrombi are more stable than the shorter ones. Furthermore, the aggregates formed on top of the severe stenosis are more stable than thrombi formed at moderate stenosis. Taken together, our results give new insights into the interplay between critical interplatelet forces, local hydrodynamics, and overall thrombus stability against the flow.

Radiographic and immuno-histochemical evaluation of root perforation repair using MTA with or without platelet-rich fibrin or concentrated growth factors as an internal matrix in dog's teeth: in vivo animal study

OBJECTIVES

To comparatively evaluate the in vivo outcome of MTA repair for contaminated and non-contaminated furcation perforations (FP) with or without PRF and CGF as a matrix in dogs' teeth.

METHODS

Ninety dog teeth were divided into five groups based on the iatrogenic FP repair approach after doing root canal treatment: negative control (without FP), positive control (FP without repair), MTA, MTA + PRF and MTA + CGF groups, where FP were repaired promptly in subdivision 1 (n = 10; non-contaminated) and after 4 weeks of oral contamination in subdivision 2 (n = 10;contaminated). After 3 months, the perforation site was assessed radiographically (vertical bone density), histologically (inflammatory cell count, epithelial proliferation, cementum and bone deposition) and immunohistochemically (OPN and TRAP antibodies localisation). Data collected were statistically analysed using SPSS software at a 0.05 significance level.

RESULTS

The MTA + PRF and MTA + CGF groups demonstrated significantly more bone formation, OPN immunolocalisation and fewer inflammatory cell counts than MTA group. MTA, MTA + PRF and MTA + CGF groups showed significantly favourable radiographic, histological and immunohistochemical healing features than the positive control, especially in non-contaminated subdivisions, that significantly showed better features than the contaminated subdivisions (P < 0.001).

CONCLUSION

The use CGF and PRF as a matrix beneath MTA in FP repair in dog's teeth is promising as it could increase hard and soft tissue regeneration in non-contaminated and contaminated perforations.

CLINICAL RELEVANCE

The repair of FP is challenging especially when associated with contaminated inter-radicular bone loss. Radiographic, histological and immunohistochemical comprehensive evaluation of the root and surrounding attachment apparatus response to different perforation repair protocols could give a predictable clinical outcome.

Biomechanical activation of blood platelets via adhesion to von Willebrand factor studied with mesoscopic simulations

Platelet adhesion and activation are essential initial processes of arterial and microvascular hemostasis, where high hydrodynamic forces from the bloodflow impede coagulation. The process relies on von Willebrand factor (VWF)-a linear multimeric protein of blood plasma plays a pivotal role in mechanochemical regulation of shear-induced platelet aggregation (SIPA). Adhesive interactions between VWF and glycoprotein receptors GPIb are crucial for platelet recruitment under high shear stress in fluid. Recent advances in experimental studies revealed that mechanical tension on the extracellular part of GPIb may trigger a cascade of biochemical reactions in platelets leading to activation of integrins [Formula: see text] (also known as GPIIb/IIIa) and strengthening of the adhesion. The present paper is aimed at investigation of this process by three-dimensional computer simulations of platelet adhesion to surface-grafted VWF multimers in pressure-driven flow of platelet-rich plasma. The simulations demonstrate that GPIb-mediated mechanotransduction is a feasible way of platelet activation and stabilization of platelet aggregates under high shear stress. Quantitative understanding of mechanochemical processes involved in SIPA would potentially promote the discovery of new anti-platelet medication and the development of multiscale numerical models of platelet thrombosis and hemostasis.

Synthesis of Biocompatible Superparamagnetic Iron Oxide Nanoparticles (SPION) under Different Microfluidic Regimes

Superparamagnetic iron oxide nanoparticles (SPION) have a great potential in both diagnostic and therapeutic applications as they provide contrast in magnetic resonance imaging techniques and allow magnetic hyperthermia and drug delivery. Though various types of SPION are commercially available, efforts to improve the quality of SPION are highly in demand. Here, we describe a strategy for optimization of SPION synthesis under microfluidics using the coprecipitation approach. Synthesis parameters such as temperature, pH, iron salt concentration, and coating materials were investigated in continuous and segmented flows. Continuous flow allowed synthesizing particles of a smaller size and higher stability than segmented flow, while both conditions improved the quality of particles compared to batch synthesis. The most stable particles were obtained at a synthesis condition of 6.5 M NH4OH base, iron salt (Fe2+/Fe3+) concentration ratio of 4.3/8.6, carboxymethyl dextran coating of 20 mg/mL, and temperature of 70 °C. The synthesized SPION exhibited a good efficiency in labeling of human platelets and did not impair cells. Our study under flow conditions provides an optimal protocol for the synthesis of better and biocompatible SPION that contributes to the development of nanoparticles for medical applications.

Targeting biophysical cues to address platelet storage lesions

Platelets play vital roles in vascular repair, especially in primary hemostasis, and have been widely used in transfusion to prevent bleeding or manage active bleeding. Recently, platelets have been used in tissue repair (e.g., bone, skin, and dental alveolar tissue) and cell engineering as drug delivery carriers. However, the biomedical applications of platelets have been associated with platelet storage lesions (PSLs), resulting in poor clinical outcomes with reduced recovery, survival, and hemostatic function after transfusion. Accumulating evidence has shown that biophysical cues play important roles in platelet lesions, such as granule secretion caused by shear stress, adhesion affected by substrate stiffness, and apoptosis caused by low temperature. This review summarizes four major biophysical cues (i.e., shear stress, substrate stiffness, hydrostatic pressure, and thermal microenvironment) involved in the platelet preparation and storage processes, and discusses how they may synergistically induce PSLs such as platelet shape change, activation, apoptosis and clearance. We also review emerging methods for studying these biophysical cues in vitro and existing strategies targeting biophysical cues for mitigating PSLs. We conclude with a perspective on the future direction of biophysics-based strategies for inhibiting PSLs. STATEMENT OF SIGNIFICANCE: Platelet storage lesions (PSLs) involve a series of structural and functional changes. It has long been accepted that PSLs are initiated by biochemical cues. Our manuscript is the first to propose four major biophysical cues (shear stress, substrate stiffness, hydrostatic pressure, and thermal microenvironment) that platelets experience in each operation step during platelet preparation and storage processes in vitro, which may synergistically contribute to PSLs. We first clarify these biophysical cues and how they induce PSLs. Strategies targeting each biophysical cue to improve PSLs are also summarized. Our review is designed to draw the attention from a broad range of audience, including clinical doctors, biologists, physical scientists, engineers and materials scientists, and immunologist, who study on platelets physiology and pathology.

When Will Fondaparinux Induce Thrombocytopenia?

The pentasaccharide Fondaparinux, a synthetic selective factor Xa inhibitor, is one of the safest anticoagulants in the heparin family that is recommended as an alternative drug for patients with hypersensitivity to other drugs such as heparin-induced thrombocytopenia (HIT). However, some observations of Fondaparinux-induced thrombocytopenia (FIT) have been reported while others claimed that FIT does not occur in patients with fondaparinux therapy, indicating that the mechanism of FIT remains controversial. Here, we utilized different methodologies including dynamic light scattering, immunosorbent and platelet aggregation assays, confocal laser scanning microscopy, and flow cytometry to gain insights into FIT. We found that at a certain concentration, Fondaparinux formed sufficient large and stable complexes with PF4 that facilitated binding of the HIT-like monoclonal KKO antibody and enhanced platelet aggregation and activation. We proposed a model to describe the role of Fondaparinux concentration in the formation of complexes with platelet factor 4 and how it promotes the binding of KKO. Our results clarify controversial observations of FIT in patients as each contains a dissimilar PF4:Fondaparinux concentration ratio.

Cold-stored platelets have better preserved contractile function in comparison with room temperature-stored platelets over 21 days

Although it is well established that transfusion of platelets in cases of severe bleeding reduces mortality, the availability of platelets is hampered by harsh restrictions on shelf life due to elevated risks of microbial contamination and functional losses with room temperature-stored platelets (RTP) kept at 22°C. In contrast, many recent studies have shown that 4°C cold-stored platelets (CSP) are able to overcome these shortcomings leading to the recent Food and Drug Administration licensure for 14-day stored CSP when conventional platelets are unavailable. This work expands the evidence supporting superiority of CSP function by assaying the less explored platelet-mediated clot retraction of RTP and CSP in either autologous plasma (AP) or platelet additive solution (PAS) for up to 21 days. The results demonstrate that CSP have better preservation of contractile function, exhibiting retraction for up to 21 days in both AP and PAS and forming highly ordered fibrin scaffolds similar to those of fresh platelets. In contrast, RTP stored in AP showed impaired contractile function by Day 5 with no retraction after 10 days, whereas PAS-stored RTP retained contractile function for up to 21 days. Collectively, these findings support extended storage of CSP and suggest that storage in PAS can mitigate functional losses in RTP.

The antithrombotic activity of natural and synthetic coumarins

Thrombosis, which seriously endangers human health and life, is the leading cause of morbidity and mortality globally. Antithrombotic drugs can interfere with the occurrence and development of thrombotic diseases and play an important role in the treatment of thrombotic diseases. However, unsatisfactory efficacy and serious adverse effects of existing antithrombotic drugs increase the research for new, efficient and safer drugs. Natural and synthetic coumarins have been shown to possess antithrombotic activity, namely, anticoagulation and antiplatelet aggregation. Especially, coumarin-based warfarin, phenprocoumon and cloricromen have long been used in clinical treatment of thrombosis. Coumarin with low toxicity is the privileged structure for developing novel antithrombotic drugs with multiple mechanisms of action. The present review aims to compile current research on the development of coumarins against thrombosis, emphasizing the relationship between their chemical structures and therapeutic effectiveness. It is intended to provide promising ideas for the discovery of novel coumarin derivatives with high antithrombotic activity.

Modeling Thrombus Shell: Linking Adhesion Receptor Properties and Macroscopic Dynamics

Damage to arterial vessel walls leads to the formation of platelet aggregate, which acts as a physical obstacle for bleeding. An arterial thrombus is heterogeneous; it has a dense inner part (core) and an unstable outer part (shell). The thrombus shell is very dynamic, being composed of loosely connected discoid platelets. The mechanisms underlying the observed mobility of the shell and its (patho)physiological implications are unclear. To investigate arterial thrombus mechanics, we developed a novel, to our knowledge, two-dimensional particle-based computational model of microvessel thrombosis. The model considers two types of interplatelet interactions: primary reversible (glycoprotein Ib (GPIb)-mediated) and stronger integrin-mediated interaction, which intensifies with platelet activation. At high shear rates, the former interaction leads to adhesion, and the latter is primarily responsible for stable platelet aggregation. Using a stochastic model of GPIb-mediated interaction, we initially reproduced experimental curves that characterize individual platelet interactions with a von Willebrand factor-coated surface. The addition of the second stabilizing interaction results in thrombus formation. The comparison of thrombus dynamics with experimental data allowed us to estimate the magnitude of critical interplatelet forces in the thrombus shell and the characteristic time of platelet activation. The model predicts moderate dependence of maximal thrombus height on the injury size in the absence of thrombin activity. We demonstrate that the developed stochastic model reproduces the observed highly dynamic behavior of the thrombus shell. The presence of primary stochastic interaction between platelets leads to the properties of thrombus consistent with in vivo findings; it does not grow upstream of the injury site and covers the whole injury from the first seconds of the formation. А simplified model, in which GPIb-mediated interaction is deterministic, does not reproduce these features. Thus, the stochasticity of platelet interactions is critical for thrombus plasticity, suggesting that interaction via a small number of bonds drives the dynamics of arterial thrombus shell.

Controlling Surface-Induced Platelet Activation by Agarose and Gelatin-Based Hydrogel Films

Platelet-surface interaction is of paramount importance in biomedical applications as well as in vitro studies. However, controlling platelet-surface activation is challenging and still requires more effort as they activate immediately when contacting with any nonphysiological surface. As hydrogels are highly biocompatible, in this study, we developed agarose and gelatin-based hydrogel films to inhibit platelet-surface adhesion. We found promising agarose films that exhibit higher surface wettability, better controlled-swelling properties, and greater stiffness compared to gelatin, resulting in a strong reduction of platelet adhesion. Mechanical properties and surface wettability of the hydrogel films were varied by adding magnetite (Fe3O4) nanoparticles. While all of the films prevented platelet spreading, films formed by agarose and its nanocomposite repelled platelets and inhibited platelet adhesion and activation stronger than those of gelatin. Our results showed that platelet-surface activation is modulated by controlling the properties of the films underneath platelets and that the bioinert agarose can be potentially translated to the development of platelet storage and other medical applications.

Modulation of Platelet-Surface Activation: Current State and Future Perspectives

Modulation of platelet-surface activation is important for many biomedical applications such as in vivo performance, platelet storage, and acceptance of an implant. Reducing platelet-surface activation is challenging because they become activated immediately after short contact with nonphysiological surfaces. To date, controversies and open questions in the field of platelet-surface activation still remain. Here, we review state-of-the-art approaches in inhibiting platelet-surface activation, mainly focusing on modification, patterning, and methodologies for characterization of the surfaces. As a future perspective, we discuss how the combination of biochemical and physiochemical strategies together with the topographical modulations would assist in the search for an ideal nonthrombogenic surface.

Mitoquinone (MitoQ) Inhibits Platelet Activation Steps by Reducing ROS Levels

Platelet activation plays a key role in cardiovascular diseases. The generation of mitochondrial reactive oxygen species (ROS) has been described as a critical step required for platelet activation. For this reason, it is necessary to find new molecules with antiplatelet activity and identify their mechanisms of action. Mitoquinone (MitoQ) is a mitochondria-targeted antioxidant that reduces mitochondrial overproduction of ROS. In this work, the antiplatelet effect of MitoQ through platelet adhesion and spreading, secretion, and aggregation was evaluated. Thus MitoQ, in a non-toxic effect, decreased platelet adhesion and spreading on collagen surface, and expression of P-selectin and CD63, and inhibited platelet aggregation induced by collagen, convulxin, thrombin receptor activator peptide-6 (TRAP-6), and phorbol 12-myristate 13-acetate (PMA). As an antiplatelet mechanism, we showed that MitoQ produced mitochondrial depolarization and decreased ATP secretion. Additionally, in platelets stimulated with antimycin A and collagen MitoQ significantly decreased ROS production. Our findings showed, for the first time, an antiplatelet effect of MitoQ that is probably associated with its mitochondrial antioxidant effect.

Blood Clot Phenotyping by Rheometry: Platelets and Fibrinogen Chemistry Affect Stress-Softening and -Stiffening at Large Oscillation Amplitude

(1) Background: Together with treatment protocols, viscoelastic tests are widely used for patient care. Measuring at broader ranges of deformation than currently done will add information on a clot’s mechanical phenotype because fibrin networks follow different stretching regimes, and blood flow compels clots into a dynamic non-linear response. (2) Methods: To characterize the influence of platelets on the network level, a stress amplitude sweep test (LAOStress) was applied to clots from native plasma with five platelet concentrations. Five species were used to validate the protocol (human, cow, pig, rat, horse). By Lissajous plots the oscillation cycle for each stress level was analyzed. (3) Results: Cyclic stress loading generates a characteristic strain response that scales with the platelet quantity at low stress, and that is independent from the platelet count at high shear stress. This general behavior is valid in the animal models except cow. Here, the specific fibrinogen chemistry induces a stiffer network and a variant high stress response. (4) Conclusions: The protocol provides several thresholds to connect the softening and stiffening behavior of clots with the applied shear stress. This points to the reversible part of deformation, and thus opens a new route to describe a blood clot’s phenotype.

Correlative fluorescence and atomic force microscopy to advance the bio-physical characterisation of co-culture of living cells

An understanding of the cell mechanical properties involved in numerous cellular processes including cell division, cell migration/invasion, and cell morphology, is crucial in developing and informing cell physiology and function. Atomic force microscopy (AFM) offers a powerful biophysical technique that facilitates the imaging of living cells under physiological buffer conditions. However, AFM in isolation cannot discriminate between different cell types within heterogeneous samples for example in a solid biopsy. The current studies demonstrate the potential of AFM in combination with correlative fluorescence optical sectioning microscopy for live cell imaging. Furthermore, this work establishes the advantage of fluorescence-AFM imaging to distinguish and analyse single-cell bio-physical properties in mixed human cell populations, in real-time. Critically, our results show that correlative fluorescence-AFM imaging allows the simultaneous co-localised detection of fluorescence coupled with nano-mechanical mapping. The findings from this work contribute to the promotion and dissemination of correlative multimodal imaging in life sciences, providing a platform for further investigations in biological and pre-clinical research.

Pharmacological Blockade of Glycoprotein VI Promotes Thrombus Disaggregation in the Absence of Thrombin

OBJECTIVE

Atherothrombosis occurs upon rupture of an atherosclerotic plaque and leads to the formation of a mural thrombus. Computational fluid dynamics and numerical models indicated that the mechanical stress applied to a thrombus increases dramatically as a thrombus grows, and that strong inter-platelet interactions are essential to maintain its stability. We investigated whether GPVI (glycoprotein VI)-mediated platelet activation helps to maintain thrombus stability by using real-time video-microscopy. Approach and Results: We showed that GPVI blockade with 2 distinct Fab fragments promoted efficient disaggregation of human thrombi preformed on collagen or on human atherosclerotic plaque material in the absence of thrombin. ACT017-induced disaggregation was achieved under arterial blood flow conditions, and its effect increased with wall shear rate. GPVI regulated platelet activation within a growing thrombus as evidenced by the loss in thrombus contraction when GPVI was blocked, and the absence of the disaggregating effect of an anti-GPVI agent when the thrombi were fully activated with soluble agonists. The GPVI-dependent thrombus stabilizing effect was further supported by the fact that inhibition of any of the 4 key immunoreceptor tyrosine-based motif signalling molecules, src-kinases, Syk, PI3Kβ, or phospholipase C, resulted in kinetics of thrombus disaggregation similar to ACT017. The absence of ACT017-induced disaggregation of thrombi from 2 afibrinogenemic patients suggests that the role of GPVI requires interaction with fibrinogen. Finally, platelet disaggregation of fibrin-rich thrombi was also promoted by ACT017 in combination with r-tPA (recombinant tissue plasminogen activator).

CONCLUSIONS

This work identifies an unrecognized role for GPVI in maintaining thrombus stability and suggests that targeting GPVI could dissolve platelet aggregates with a poor fibrin content.

Statistical analysis of 3D localisation microscopy images for quantification of membrane protein distributions in a platelet clot model

We present the software platform 2CALM that allows for a comparative analysis of 3D localisation microscopy data representing protein distributions in two biological samples. The in-depth statistical analysis reveals differences between samples at the nanoscopic level using parameters such as cluster-density and -curvature. An automatic classification system combines multiplex and multi-level statistical approaches into one comprehensive parameter for similarity testing of the compared samples. We demonstrated the biological importance of 2CALM, comparing the protein distributions of CD41 and CD62p on activated platelets in a 3D artificial clot. Additionally, using 2CALM, we quantified the impact of the inflammatory cytokine interleukin-1β on platelet activation in clots. The platform is applicable to any other cell type and biological system and can provide new insights into biological and medical applications.

A Comprehensive Review of Concentrated Growth Factors and Their Novel Applications in Facial Reconstructive and Regenerative Medicine

BACKGROUND

Concentrated growth factors (CGFs) are the latest generation of platelet concentrates. The objective of developing CGF is to increase therapeutic efficacy. However, few studies have supported the superiority of CGF in composition and efficacy. The reconstruction and regeneration process is complicated and long term, whereas bioactivity of CGF is not durable. The purpose of this review is threefold. The first is to recommend more comparative studies between CGF and other platelet concentrates. The second is to constitute a continuous drug delivery system by combining CGF with other biomaterials. Finally, the novel use of CGF in facial regenerative and reconstructive medicine will be highlighted.

METHODS

A comprehensive review of literature regarding the use of CGF in facial regenerative and reconstructive medicine was performed. Based on the inclusion and exclusion criteria, a total of 135 articles were included.

RESULTS

The use of CGF involving facial rejuvenation, cartilage grafting, facial bone defects, facial peripheral nerve injury and wounding is reviewed. The reconstructive and regenerative principles lie in firm fibrin scaffolds and continuous in situ delivery of multiple growth factors.

CONCLUSIONS

CGF represents an advance in personalized medicine concept. However, the current scientific evidences about the use of CGF are limited. More basic and clinical studies should be conducted to understand the characteristics and clinical application of CGF.

LEVEL OF EVIDENCE V

This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266.

Quantifying single-platelet biomechanics: An outsider's guide to biophysical methods and recent advances

Platelets are the key cellular components of blood primarily contributing to formation of stable hemostatic plugs at the site of vascular injury, thus preventing excessive blood loss. On the other hand, excessive platelet activation can contribute to thrombosis. Platelets respond to many stimuli that can be of biochemical, cellular, or physical origin. This drives platelet activation kinetics and plays a vital role in physiological and pathological situations. Currently used bulk assays are inadequate for comprehensive biomechanical assessment of single platelets. Individual platelets interact and respond differentially while modulating their biomechanical behavior depending on dynamic changes that occur in surrounding microenvironments. Quantitative description of such a phenomenon at single-platelet regime and up to nanometer resolution requires methodological approaches that can manipulate individual platelets at submicron scales. This review focusses on principles, specific examples, and limitations of several relevant biophysical methods applied to single-platelet analysis such as micropipette aspiration, atomic force microscopy, scanning ion conductance microscopy and traction force microscopy. Additionally, we are introducing a promising single-cell approach, real-time deformability cytometry, as an emerging biophysical method for high-throughput biomechanical characterization of single platelets. This review serves as an introductory guide for clinician scientists and beginners interested in exploring one or more of the above-mentioned biophysical methods to address outstanding questions in single-platelet biomechanics.

Rolling or Two-Stage Aggregation of Platelets on the Surface of Thin Ceramic Coatings under in Vitro Simulated Blood Flow Conditions

The process of modern cardiovascular device fabrication should always be associated with an investigation of how surface properties modulate its hemocompatibility through plasma protein adsorption as well as blood morphotic element activation and adhesion. In this work, a package of novel assays was used to correlate the physicochemical properties of thin ceramic coatings with hemocompatibility under dynamic conditions. Different variants of carbon-based films were prepared on polymer substrates using the magnetron sputtering method. The microstructural, mechanical, and surface physicochemical tests were performed to characterize the coatings, followed by investigation of whole human blood quality changes under blood flow conditions using the "Impact R" test, tubes' tester, and radial flow chamber assay. The applied methodology allowed us to determine that aggregate formation on hydrophobic and hydrophilic carbon-based coatings may follow one of the two different mechanisms dependent on the type and conformational changes of adsorbed blood plasma proteins.

Platelets as autonomous drones for hemostatic and immune surveillance

Platelets participate in many important physiological processes, including hemostasis and immunity. However, despite their broad participation in these evolutionarily critical roles, the anucleate platelet is uniquely mammalian. In contrast with the large nucleated equivalents in lower vertebrates, we find that the design template for the evolutionary specialization of platelets shares remarkable similarities with human-engineered unmanned aerial vehicles in terms of overall autonomy, maneuverability, and expendability. Here, we review evidence illustrating how platelets are uniquely suited for surveillance and the manner in which they consequently provide various types of support to other cell types.

PTFEP-Al2O3 hybrid nanowires reducing thrombosis and biofouling

Thrombosis and bacterial infection are major problems in cardiovascular implants. Here we demonstrated that a superhydrophobic surface composed of poly(bis(2,2,2-trifluoroethoxy)phosphazene) (PTFEP)-Al₂O₃ hybrid nanowires (NWs) is effective to reduce both platelet adhesion/activation and bacterial adherence/colonization. The proposed approach allows surface modification of cardiovascular implants which have 3D complex geometries.

Platelet-Based Drug Delivery for Cancer Applications

Platelets can be considered as the "guardian of hemostasis" where their main function is to maintain vascular integrity. In pathological conditions, the hemostatic role of platelets may be hijacked to stimulate disease progression. In 1865, Armand Trousseau was a pioneer in establishing the platelet-cancer metastasis relationship, which he eventually termed as Trousseau's Syndrome to describe the deregulation of the hemostasis-associated pathways induced by cancer progression (Varki, Blood. 110(6):1723-9, 2007). Since these early studies, there has been an increase in experimental evidence not only to elucidate the role of platelets in cancer metastasis but also to create novel cancer therapies by targeting the platelet's impact in metastasis. In this chapter, we discuss the contribution of platelets in facilitating tumor cell transit from the primary tumor to distant metastatic sites as well as novel cancer therapies based on platelet interactions.

Platelet Mechanotransduction

The vasculature is a dynamic environment in which blood platelets constantly survey the endothelium for sites of vessel damage. The formation of a mechanically coherent hemostatic plug to prevent blood loss relies on a coordinated series of ligand-receptor interactions governing the recruitment, activation, and aggregation of platelets. The physical biology of each step is distinct in that the recruitment of platelets depends on the mechanosensing of the platelet receptor glycoprotein Ib for the adhesive protein von Willebrand factor, whereas platelet activation and aggregation are responsive to the mechanical forces sensed at adhesive junctions between platelets and at the platelet-matrix interface. Herein we take a biophysical perspective to discuss the current understanding of platelet mechanotransduction as well as the measurement techniques used to quantify the physical biology of platelets in the context of thrombus formation under flow.

Cuboidal tethered cyclodextrin frameworks tailored for hemostasis and injured vessel targeting

Rationale: Targeted delivery of therapeutic drugs or imaging agents to injured blood vessels via nanocarriers is likely to be dependent on the particle shape, yet cubic nanoparticle carriers have not been reported for vascular targeting. Here, we demonstrate that cuboidal cyclodextrin frameworks possess superior hemostasis effect and injured vessels targeting compared with spherical counterpart.

Methods: Cuboidal and biocompatible γ-cyclodextrin metal-organic frameworks (CD-MOFs) are synthesized, tethered via crosslinking and surface modification with GRGDS peptide (GS5-MOFs). The specific interactions of cubic GS5-MOF nanoparticles with activated platelets were investigated by in vitro platelet aggregation assay and atomic force microscopy measurements (AFM). The hemostatic capacity and injured vessel targeting efficacy were evaluated in vivo.

Results: Cuboidal GS5-MOF nanoparticles exhibit enhanced adhesion and aggregation with activated platelets in vitro under static condition and a physiologically relevant flow environment. The cubic GS5-MOF nanoparticles show efficient hemostatic effects with bleeding time and blood loss decrease of 90% and strong injured vessel targeting in vivo, markedly superior to spherical γ-CD nanosponges with the same chemical composition.

Conclusions: These results clearly highlight the contribution of the cuboidal shape of GS5-MOFs to the enhanced aggregation of activated platelets and high targeting to damaged vessels. The cuboidal nanoparticle system provides an innovative delivery platform for the treatment and diagnosis of vascular diseases.

Distinct Binding Characteristics of Pathogenic Anti-Platelet Factor-4/Polyanion Antibodies to Antigens Coated on Different Substrates: A Perspective on Clinical Application

The polyanion heparin, which is frequently used in patients, complexes with the platelet-derived cationic chemokine platelet factor (PF4, CXCL4). This results in the formation of anti-PF4/heparin antibodies (anti-PF4/H Abs). Anti-PF4/H Abs are classified into three groups: (i) nonpathogenic Abs (group 1) with no clinical relevance; (ii) pathogenic heparin-dependent Abs (group 2), which activate platelets and can cause the severe adverse drug effect heparin-induced thrombocytopenia (HIT); and (iii) pathogenic autoimmune-HIT Abs (group 3), in which group 3 anti-PF4/H Abs causes a HIT-like autoimmune disease in the absence of heparin. Enzyme immunoassays using PF4/H complexes coated on the solid phase for detection of anti-PF4/H Abs cannot differentiate between pathogenic and nonpathogenic anti-PF4/H Abs. By single-molecule force spectroscopy, we identify a specific feature of pathogenic group 2 and group 3 Abs antibodies that (in contrast to nonpathogenic group 1 Abs) their binding forces to PF4/H complexes coated on platelets were significantly higher compared with those of PF4/H complexes immobilized on a solid phase. Only group 3 Abs showed high binding forces to platelets without the addition of PF4. In the presence of 50 μg/mL PF4, group 2 Abs also showed high binding forces to platelets. In contrast, binding forces of group 1 Abs always remained low (<100 pN). Our findings may have major relevance for the development of clinically applicable solid-phase assays, which allow differentiation of pathogenic platelet-activating from nonpathogenic anti-PF4/H Abs. Membrane-based expression of antigens might also increase the specificity of other assays for the detection of pathogenic (auto)-antibodies in clinical medicine.

Uptake Pathways of Protein-Coated Magnetic Nanoparticles in Platelets

Magnetic nanoparticles have recently shown great potential in nonradioactive labeling of platelets. Platelet labeling efficiency is enhanced when particles are conjugated with proteins like human serum albumin (HSA). However, the optimal HSA density coated on particles and the uptake mechanism of single particles in platelets remain unclear. Here, we utilized single-molecule force spectroscopy (SMFS) and other complementary methods to characterize the interaction of particles when interacting with platelets and to determine the optimal HSA amount required to coat particles. An HSA concentration of 0.5-1.0 mg/mL for coating particles is most efficient for platelet labeling. Binding pathways could be elucidated by linking a single HSA particle to SMFS tips via polyethylene glycol (PEG) linkers of different lengths and allowing them to interact with immobilized platelets on the substrate. Depending on the PEG length (i.e., short ∼2 nm, medium ∼30 nm, and long ∼100 nm), particles interact differently with platelets as shown by one, two, or three force distributions, which correspond up to three different binding pathways, respectively. We propose a model that the short PEG linker allows the particle to interact only with the platelet membrane, whereas the medium and long PEG linkers promote the particle to transfer from open canalicular system to another target inside platelets. Our study optimizes magnetic platelet labeling and provides details of particle pathways in platelets.

Blood-Contacting Biomaterials: In Vitro Evaluation of the Hemocompatibility

Hemocompatibility of blood-contacting biomaterials is one of the most important criteria for their successful in vivo applicability. Thus, extensive in vitro analyses according to ISO 10993-4 are required prior to clinical applications. In this review, we summarize essential aspects regarding the evaluation of the hemocompatibility of biomaterials and the required in vitro analyses for determining the blood compatibility. Static, agitated, or shear flow models are used to perform hemocompatibility studies. Before and after the incubation of the test material with fresh human blood, hemolysis, cell counts, and the activation of platelets, leukocytes, coagulation and complement system are analyzed. Furthermore, the surface of biomaterials are evaluated concerning attachment of blood cells, adsorption of proteins, and generation of thrombus and fibrin networks.

A Comparative Evaluation of Concentrated Growth Factor and Platelet-rich Fibrin on the Proliferation, Migration, and Differentiation of Human Stem Cells of the Apical Papilla

INTRODUCTION

Concentrated growth factor (CGF) is considered to be a natural biomaterial that is better than platelet-rich fibrin (PRF) in bone regeneration, but there is little information acquired in regenerative endodontics. Therefore, the purpose of this study was to evaluate their effects on the proliferation, migration, and differentiation of human stem cells of the apical papilla (SCAPs).

METHODS

CGF- and PRF-conditioned medium were prepared using the freeze-dried method. SCAPs were isolated and identified. The proliferative potential of SCAPs was investigated using the Cell Counting Kit-8 (KeyGen Biotech, Nanjing, China). The migration capacity was analyzed using transwell assays, and the mineralization ability was determined by alizarin red S staining. The expression levels of alkaline phosphatase, bone sialoprotein, dentin matrix protein 1, and dentin sialophosphoprotein were determined by quantitative polymerase chain reaction.

RESULTS

The cultured cells exhibited mesenchymal stem cell characteristics. The growth rate and migratory cell numbers of the CGF and PRF groups were significantly greater than those of the control group. The mineralized areas in the CGF and PRF groups were significantly larger than those in the control group after incubation for 7 days and 14 days. The expression levels of osteogenic/odontoblast-related genes were reduced on day 7, but they were dramatically enhanced on day 14, and the related gene expression levels in the PRF group were higher than those in the CGF group.

CONCLUSIONS

Both CGF and PRF can promote the proliferation, migration, and differentiation of SCAPs. CGF may be a promising alternative in regenerative endodontics.

Platelet biomechanics, platelet bioenergetics, and applications to clinical practice and translational research

The purpose of this review is to explore the relationship between platelet bioenergetics and biomechanics and how this relationship affects the clinical interpretation of platelet function devices. Recent experimental and technological advances highlight platelet bioenergetics and biomechanics as alternative avenues for collecting clinically relevant data. Platelet bioenergetics drive energy production for key biomechanical processes like adhesion, spreading, aggregation, and contraction. Platelet function devices like thromboelastography, thromboelastometry, and aggregometry measure these biomechanical processes. Platelet storage, stroke, sepsis, trauma, or the activity of antiplatelet drugs alters measures of platelet function. However, the specific mechanisms governing these alterations in platelet function and how they relate to platelet bioenergetics are still under investigation.

Nanoparticle Properties Modulate Their Attachment and Effect on Carrier Red Blood Cells

Attachment of nanoparticles (NPs) to the surface of carrier red blood cells (RBCs) profoundly alters their interactions with the host organism, decelerating NP clearance from the bloodstream while enabling NP transfer from the RBC surface to the vascular cells. These changes in pharmacokinetics of NPs imposed by carrier RBCs are favorable for many drug delivery purposes. On the other hand, understanding effects of NPs on the carrier RBCs is vital for successful translation of this novel drug delivery paradigm. Here, using two types of distinct nanoparticles (polystyrene (PSNP) and lysozyme-dextran nanogels (LDNG)) we assessed potential adverse and sensitizing effects of surface adsorption of NPs on mouse and human RBCs. At similar NP loadings (approx. 50 particles per RBC), adsorption of PSNPs, but not LDNGs, induces RBCs agglutination and sensitizes RBCs to damage by osmotic, mechanical and oxidative stress. PSNPs, but not LDNGs, increase RBC stiffening and surface exposure of phosphatidylserine, both known to accelerate RBC clearance in vivo. Therefore, NP properties and loading amounts have a profound impact on RBCs. Furthermore, LDNGs appear conducive to nanoparticle drug delivery using carrier RBCs.

Quantification of growth factors in different platelet concentrates

Concentrated growth factor (CGF), a new generation of platelet concentrate product, appears to have more abundant growth factors because of its special centrifugation process. However, there are few studies supporting this. This study was designed to evaluate the contents of major growth factors in CGF and compare them with those found in PRP (platelet-rich plasma) and PRF (platelet-rich fibrin). PRP, PRF, and CGF were obtained from the same samples of peripheral blood. Concentrations of five representative growth factors in platelets were measured with enzyme-linked immunosorbent assay (ELISA): platelet-derived growth factor-BB (PDGF-BB), transforming growth factor β-1 (TGF-β1), insulin-like growth factor-1 (IGF-1), vascular endothelial growth factor (VEGF), and basic fibroblast growth factor (bFGF). The results showed that the bFGF levels in CGF and PRF were significantly higher than that in activated PRP. For other growth factors, such as PDGF-BB, TGF-β1, IGF-1, and VEGF, the levels did not differ significantly among activated PRP, PRF, and CGF. Our findings extended the currently available data on the release and measurement of growth factors in CGF and other platelet gels. In future studies, we need more data to find the proper therapeutic doses for platelet concentrates suitable for different clinical applications.

PlA2 Polymorphism in Glycoprotein IIb/IIIa Modulates the Morphology and Nanomechanics of Platelets

Glycoprotein IIb/IIIa (GPIIb/IIIa) is the most abundant platelet surface receptor for fibrinogen and von Willebrand factor. Polymorphism PlA1/A2 in the gene of GPIIb/IIIa is among the risk factors for the development of arterial and venous thrombosis. The aim of this study is to evaluate the effect of the carriage of PlA1/A2 on the size, topographic features, and membrane stiffness of platelets from healthy controls and patients with deep venous thrombosis (DVT). Atomic force microscopy (AFM) imaging and nanoindentation (force-distance curves) were applied to investigate the morphological and nanomechanical properties (Young's modulus) of platelets immobilized on glass surface. The surface roughness ( R_a) and height ( h) of platelets from patients with DVT, carriers of mutant allele PlA2 ( R_a = 30.2 ± 6 nm; h = 766 ± 182 nm) and noncarriers ( R_a = 28.6 ± 6 nm; h = 865 ± 290 nm), were lower than those of healthy carriers of allele PlA2 ( R_a = 48.1 ± 12 nm; h = 1072 ± 338 nm) and healthy noncarriers ( R_a = 49.7 ± 14 nm; h = 1021 ± 433 nm), respectively. Platelets isolated from patients with DVT, both carriers and noncarriers, exhibit much higher degree of stiffness at the stage of spreading ( E = 327 ± 85 kPa and 341 ± 102 kPa, respectively) compared to healthy noncarriers ( E = 198 ± 50 kPa). In addition, more pronounced level of platelet activation was found in polymorphism carriers. In conclusion, the carriage of PlA2 allele modulates the activation state, morphology, and membrane elasticity of platelets.