Broadband gradient impedance matching using an acoustic metamaterial for ultrasonic transducers

Tailored ultrasound propagation in microscale metamaterials via inertia design

The quasi-static properties of micro-architected (meta)materials have been extensively studied over the past decade, but their dynamic responses, especially in acoustic metamaterials with engineered wave propagation behavior, represent a new frontier. However, challenges in miniaturizing and characterizing acoustic metamaterials in high-frequency (megahertz) regimes have hindered progress toward experimentally implementing ultrasonic-wave control. Here, we present an inertia design framework based on positioning microspheres to tune responses of 3D microscale metamaterials. We demonstrate tunable quasi-static stiffness by up to 75% and dynamic longitudinal-wave velocities by up to 25% while maintaining identical material density. Using noncontact laser-based dynamic experiments of tunable elastodynamic properties and numerical demonstrations of spatio-temporal ultrasound wave propagation, we explore the tunable static and elastodynamic property relation. This design framework expands the quasi-static and dynamic metamaterial property space through simple geometric changes, enabling facile design and fabrication of metamaterials for applications in medical ultrasound and analog computing.

Wearable ultrasound devices: An emerging era for biomedicine and clinical translation

In recent years, personalized diagnosis and treatment have gained significant recognition and rapid development in the biomedicine and healthcare. Due to the flexibility, portability and excellent compatibility, wearable ultrasound (WUS) devices have become emerging personalized medical devices with great potential for development. Currently, with the development of the ongoing advancements in materials and structural design of the ultrasound transducers, WUS devices have improved performance and are increasingly applied in the medical field. In this review, we provide an overview of the design and structure of WUS devices, focusing on their application for diagnosis and treatment of various diseases from a clinical application perspective, and then explore the issues that need to be addressed before clinical translation. Finally, we summarize the progress made in the development of WUS devices, and discuss the current challenges and the future direction of their development. In conclusion, WUS devices usher an emerging era for biomedicine with great clinical promise.

Emerging Wearable Ultrasound Technology

This perspective article provides a brief overview on materials, fabrications, beamforming, and applications for wearable ultrasound devices, a rapidly growing field with versatile implications. Recent developments in miniaturization and soft electronics have significantly advanced wearable ultrasound devices. Such devices offer distinctive advantages over traditional ultrasound probes, including prolonged usability and operator independence, and have demonstrated their effectiveness in continuous monitoring, noninvasive therapies, and advanced human-machine interfaces. Wearable ultrasound devices can be classified into three main categories: rigid, flexible, and stretchable, each having distinctive properties and fabrication strategies. Key unique strategies in device design, packaging, and beamforming for each type of wearable ultrasound devices are reviewed. Furthermore, we highlight the latest applications enabled by wearable ultrasound technology in various areas. This article concludes by discussing the outstanding challenges within the field and outlines potential pathways for future advancements.

Frequency-Resolved High-Frequency Broadband Measurement of Acoustic Longitudinal Waves by Laser-Based Excitation and Detection

Optoacoustics is a metrology widely used for material characterisation. In this study, a measurement setup for the selective determination of the frequency-resolved phase velocities and attenuations of longitudinal waves over a wide frequency range (3-55 MHz) is presented. The ultrasonic waves in this setup were excited by a pulsed laser within an absorption layer in the thermoelastic regime and directed through a layer of water onto a sample. The acoustic waves were detected using a self-built adaptive interferometer with a photorefractive crystal. The instrument transmits compression waves only, is low-contact, non-destructive, and has a sample-independent excitation. The limitations of the approach were studied both by simulation and experiments to determine how the frequency range and precision can be improved. It was shown that measurements are possible for all investigated materials (silicon, silicone, aluminium, and water) and that the relative error for the phase velocity is less than 0.2%.

Void-Engineered Metamaterial Delay Line with Built-In Impedance Matching for Ultrasonic Applications

Metamaterials exhibit unique ultrasonic properties that are not always achievable with traditional materials. However, the structures and geometries needed to achieve such properties are often complex and difficult to obtain using common fabrication techniques. In the present research work, we report a novel metamaterial acoustic delay line with built-in impedance matching that is fabricated using a common 3D printer. Delay lines are commonly used in ultrasonic inspection when signals need to be separated in time for improved sensitivity. However, if the impedance of the delay line is not perfectly matched with those of both the sensor and the target medium, a strong standing wave develops in the delay line, leading to a lower energy transmission. The presented metamaterial delay line was designed to match the acoustic impedance at both the sensor and target medium interfaces. This was achieved by introducing graded engineered voids with different densities at both ends of the delay line. The measured impedances of the designed metamaterial samples show a good match with the theoretical predictions. The experimental test results with concrete samples show that the acoustic energy transmission is increased by 120% and the standing wave in the delay line is reduced by over a factor of 2 compared to a commercial delay line.

An Emerging Era: Conformable Ultrasound Electronics

Conformable electronics are regarded as the next generation of personal healthcare monitoring and remote diagnosis devices. In recent years, piezoelectric-based conformable ultrasound electronics (cUSE) have been intensively studied due to their unique capabilities, including nonradiative monitoring, soft tissue imaging, deep signal decoding, wireless power transfer, portability, and compatibility. This review provides a comprehensive understanding of cUSE for use in biomedical and healthcare monitoring systems and a summary of their recent advancements. Following an introduction to the fundamentals of piezoelectrics and ultrasound transducers, the critical parameters for transducer design are discussed. Next, five types of cUSE with their advantages and limitations are highlighted, and the fabrication of cUSE using advanced technologies is discussed. In addition, the working function, acoustic performance, and accomplishments in various applications are thoroughly summarized. It is noted that application considerations must be given to the tradeoffs between material selection, manufacturing processes, acoustic performance, mechanical integrity, and the entire integrated system. Finally, current challenges and directions for the development of cUSE are highlighted, and research flow is provided as the roadmap for future research. In conclusion, these advances in the fields of piezoelectric materials, ultrasound transducers, and conformable electronics spark an emerging era of biomedicine and personal healthcare.

Elastic Waves Excitation and Focusing by a Piezoelectric Transducer with Intermediate Layered Elastic Metamaterials with and without Periodic Arrays of Interfacial Voids

Optimization of the structure of piezoelectric transducers such as the proper design of matching layers can increase maximum wave energy transmission to the host structure and transducer sensitivity. A novel configuration of an ultrasonic transducer, where elastic metamaterial insertion is introduced to provide bulk wave mode conversion and to increase wave energy transfer into a substrate, is proposed. Configurations of layered elastic metamaterials with crack-like voids are examined theoretically since they can provide wide band gaps and strong wave localization and trapping. The analysis shows that the proposed metamaterial-based matching layers can sufficiently change wave energy transmission from a piezoelectric active element for various frequency ranges (relatively low frequencies as well as higher ones). The proposed configuration can also be useful for advanced sensing with higher sensitivity in certain frequency ranges or for demultiplexing different kinds of elastic waves.

Enhanced Ultrasound Transmission through Skull Using Flexible Matching Layer with Gradual Acoustic Impedance

Transcranial ultrasound imaging and therapy have gained significant attention due to their noninvasive nature, absence of ionizing radiation, and portability. However, the presence of the skull, which has a high acoustic impedance, presents a challenge for the penetration of ultrasound into intracranial tissue. This leads to a low transmission of ultrasound through the skull, hindering energy focusing and imaging quality. To address this challenge, we propose a novel approach that utilizes a flexible matching layer with gradual acoustic impedance to enhance ultrasound transmission through the skull. This matching layer is constructed using Poly(dimethylsiloxane) (PDMS)/tungsten powders as the structural component responsible for the gradual impedance, while agarose serves as the flexible matrix. Our simulation and experimental results demonstrate that the matching layer with an exponential gradual acoustic impedance significantly improves the ultrasound transmission coefficient across a wide frequency range compared to traditional quarter wavelength matching layers. Specifically, at 2 MHz, the maximum transmission coefficient reaches 49.5%, more than four times higher than that of the skull without a matching layer (only 11.7%). Additionally, the good flexibility of our matching layer ensures excellent adhesion to the curved surface of the skull, further enhancing its application potential in transcranial ultrasound imaging and therapy. The improved transmission performance allows for a lower ultrasound transmission power, effectively addressing overheating and safety issues.

Flexible electronics for cardiovascular healthcare monitoring

Cardiovascular diseases (CVDs) are one of the most urgent threats to humans worldwide, which are responsible for almost one-third of global mortality. Over the last decade, research on flexible electronics for monitoring and treatment of CVDs has attracted tremendous attention. In contrast to conventional medical instruments in hospitals that are usually bulky, hard to move, monofunctional, and time-consuming, flexible electronics are capable of continuous, noninvasive, real-time, and portable monitoring. Notable progress has been made in this emerging field, and thus a number of significant achievements and concomitant research prospects deserve attention for practical implementation. Here, we comprehensively review the latest progress of flexible electronics for CVDs, focusing on new functions provided by flexible electronics. First, the characteristics of CVDs and flexible electronics and the foundation of their combination are briefly reviewed. Then, four representative applications of flexible electronics for CVDs are elaborated: blood pressure (BP) monitoring, electrocardiogram (ECG) monitoring, echocardiogram monitoring, and direct epicardium monitoring. Their operational principles, progress, merits and demerits, and future efforts are discussed. Finally, the remaining challenges and opportunities for flexible electronics for cardiovascular healthcare are outlined.

Intelligent Optimization Design of a Phononic Crystal Air-Coupled Ultrasound Transducer

To further improve the operational performance of a phononic crystal air-coupled ultrasonic transducer while reducing the number of simulations, an intelligent optimization design strategy is proposed by combining finite element simulation analysis and artificial intelligence (AI) methods. In the proposed strategy, the structural design parameters of 1-3 piezoelectric composites and acoustic impedance gradient matching layer are sampled using the optimal Latin hypercube sampling (OLHS) method. Moreover, the COMSOL software is utilized to calculate the performance parameters of the transducer. Based on the simulation data, a radial basis function neural network (RBFNN) model is trained to establish the relationship between the design parameters and the performance parameters. The accuracy of the approximation model is verified through linear regression plots and statistical methods. Finally, the NSGA-II algorithm is used to determine the design parameters of the transducer. After optimization, the band gap widths of the piezoelectric composites and acoustic impedance gradient matching layer are increased by 16 kHz and 13.5 kHz, respectively. Additionally, the -6 dB bandwidth of the transducer is expanded by 11.5%. The simulation results and experimental results are consistent with the design objectives, which confirms the effectiveness of the design strategy. This work provides a feasible strategy for the design of high-performance air-coupled ultrasonic transducers, which is of great significance for the development of non-destructive testing technology.

Enhancement of Ultrasonic Transducer Bandwidth by Acoustic Impedance Gradient Matching Layer

High-performance broadband ultrasound transducers provide superior imaging quality in biomedical ultrasound imaging. However, a matching design that perfectly transmits the acoustic energy between the active piezoelectric element and the target medium over the operating spectrum is still lacking. In this work, an anisotropic gradient acoustic impedance composite material as the matching layer of an ultrasonic transducer was designed and fabricated; it is a non-uniform material with the continuous decline of acoustic impedance along the direction of ultrasonic propagation in a sub-wavelength range. This material provides a broadband window for ultrasonic propagation in a wide frequency range and achieves almost perfect sound energy transfer efficiency from the piezoelectric material to the target medium. Nano tungsten particles and epoxy resin were selected as filling and basic materials, respectively. Along the direction of ultrasonic propagation, the proportion of tungsten powder was carefully controlled to decrease gradually, following the natural exponential form in a very narrow thickness range. Using this new material as a matching layer with high-performance single crystals, the -6 dB bandwidth of the PMN-PT ultrasonic transducer could reach over 170%, and the insertion loss was only -20.3 dB. The transducer achieved a temporal signal close to a single wavelength, thus there is the potential to dramatically improve the resolution and imaging quality of the biomedical ultrasound imaging system.

Sparse 2-D PZT-on-PCB Arrays With Density Tapering

Two-dimensional (2-D) arrays offer volumetric imaging capabilities without the need for probe translation or rotation. A sparse array with elements seeded in a tapering spiral pattern enables one-to-one connection to an ultrasound machine, thus allowing flexible transmission and reception strategies. To test the concept of sparse spiral array imaging, we have designed, realized, and characterized two prototype probes designed at 2.5-MHz low-frequency (LF) and 5-MHz high-frequency (HF) center frequencies. Both probes share the same electronic design, based on piezoelectric ceramics and rapid prototyping with printed circuit board substrates to wire the elements to external connectors. Different center frequencies were achieved by adjusting the piezoelectric layer thickness. The LF and HF prototype probes had 88% and 95% of working elements, producing peak pressures of 21 and 96 kPa/V when focused at 5 and 3 cm, respectively. The one-way -3-dB bandwidths were 26% and 32%. These results, together with experimental tests on tissue-mimicking phantoms, show that the probes are viable for volumetric imaging.

Ultrawide Bandwidth High-Frequency Ultrasonic Transducers With Gradient Acoustic Impedance Matching Layer for Biomedical Imaging

The high-frequency ultrasonic transducers with larger bandwidths yield excellent imaging performance in the biomedical field. However, achieving perfect acoustic impedance matching from the piezo-element to the target medium in the operating frequency spectrum is still a challenge. Conventional matching layers are mostly fabricated by only one or two uniform materials which are limited by their acoustic property. We propose a novel composite matching layer with gradient acoustic impedance based on a 1-3 gradient composite structure and multilevel matching theory. The proposed gradient-composite matching layer applied for ultrasonic transducer provides efficient impedance matching and ultrawide bandwidth which can significantly improve the quality of biomedical imaging. The active aperture size of the matching layer is 5× 5 mm², and the overall thickness for five equivalent layers is 115 [Formula: see text]. The -6-dB bandwidth and the center frequency obtained by the ultrasonic transducer equipped with the 1-3 gradient composite matching layer are 141.7% and 22.3 MHz, respectively. The exceedingly good imaging performance of the fabricated ultrasonic transducer was demonstrated by the tungsten wire phantom and study on the biological tissues of a zebrafish and porcine eyeball. The theoretical and experimental results provide a novel train of thought for improving the quality of biomedical ultrasonic imaging.

Development of Polymer-Ceramic-Metal Graded Acoustic Matching Layers via Cold Sintering

A family of three phase, polymer-ceramic-metal (Poly-cer-met) electrically conducting composites was developed via cold sintering for acoustic matching application in medical ultrasound transducers. A range of acoustic impedance ( Z ) between MRayl with low attenuation (<3.5 dB/mm, measured at 10 MHz) was achieved in composites of zinc oxide, silver, and in thermoplastic polymers like Ultem polyetherimide (PEI) or polytetrafluoroethylene (PTFE) at sintering pressure less than 50 MPa and temperature of 150 °C. Densities exceeding 95% were achieved, with resistivities less than 1 Ω -cm. The acoustic velocity was homogeneous across the part (variations <5%). The acoustic velocities exceeded 2500 m/s for Z above 12 MRayl. The experimentally measured acoustic impedance of ZnO/Ag/PEI composites was observed to be in close agreement with the theoretical logarithmic model developed for different volume fractions of individual phases at the percolation limit for Ag. Thus, the acoustic properties of this family of matching layers (MLs) can be predicted to a good approximation before experimental realization. Additionally, a non-conducting low Z (5 MRayl MRayl) with acoustic velocities exceeding 2000 m/s was achieved using hydrozincite as the ceramic component. Scaling of the composites to 2'' diameter was demonstrated. A -6 dB bandwidth greater than 85% was measured for a three ML ultrasound transducer, fabricated using a single cold sintered layer ( Z = 19 MRayl) and two other commercial layers in the stack. Finally, a co-cold sintered graded prototype consisting of three tape-casted formulations corresponding to Z = 5 , 9, and 19 MRayl, while still retaining the correct distributions of the components was demonstrated.

Ultrasound-Responsive Systems as Components for Smart Materials

Smart materials can respond to stimuli and adapt their responses based on external cues from their environments. Such behavior requires a way to transport energy efficiently and then convert it for use in applications such as actuation, sensing, or signaling. Ultrasound can carry energy safely and with low losses through complex and opaque media. It can be localized to small regions of space and couple to systems over a wide range of time scales. However, the same characteristics that allow ultrasound to propagate efficiently through materials make it difficult to convert acoustic energy into other useful forms. Recent work across diverse fields has begun to address this challenge, demonstrating ultrasonic effects that provide control over physical and chemical systems with surprisingly high specificity. Here, we review recent progress in ultrasound-matter interactions, focusing on effects that can be incorporated as components in smart materials. These techniques build on fundamental phenomena such as cavitation, microstreaming, scattering, and acoustic radiation forces to enable capabilities such as actuation, sensing, payload delivery, and the initiation of chemical or biological processes. The diversity of emerging techniques holds great promise for a wide range of smart capabilities supported by ultrasound and poses interesting questions for further investigations.

Laser-induced ultrasound transmitters for large-volume ultrasound tomography

We present a protocol for the design, fabrication and characterisation of laser-induced ultrasound transmitters with a specific, user-defined frequency response for the purpose of ultrasound tomography of large-volume biomedical samples. Using an analytic solution to the photoacoustic equation and measurements of the optical and acoustic properties of the materials used in the transmitters, we arrive at a required mixture of carbon black and polydimethylsiloxane to achieve the desired frequency response. After an in-depth explanation of the fabrication and characterisation approaches we show the performance of the fabricated transmitter, which has a centre frequency of 0.9 MHz, 200% bandwidth and 45.8 ∘ opening angle, multi-kPa pressures over a large depth range in water.

Extraordinary broadband impedance matching in highly dispersive media - the white light cavity approach

Suppressing reflections from material boundaries has always been an objective, common to many disciplines, where wave phenomena play a role. While impedance difference between materials necessarily leads to a wave reflection, introducing matching elements can almost completely suppress this phenomenon. However, many impedance matching approaches are based on resonant conditions, which come at a price of narrow bandwidth operation. Although various impedance matching architectures have been developed in the past, many of them fail to produce a broadband and flat (ripple-free) transmission, particularly in the presence of strong chromatic dispersion. Here we propose and demonstrate an approach for designing an optimal matching stack capable of providing a flat broadband transmission even in the presence of significant group velocity dispersion. As an experimental example for the method verification, we used a strong modal dispersion in a rectangular waveguide, operating close to a mode cut-off. The waveguide core consists of alternating polymer sections with a variable filling factor, realized using additive manufacturing. As a result, a broadband matching in the range of 7-8GHz was demonstrated and proved to significantly outperform the standard binomial transformer solution. The proposed method can find use across different disciplines, including optics, acoustics and wireless communications, where undesired reflections can significantly degrade system's performances.

Optimization of Matching Layers to Extend the Usable Frequency Band for Underwater Single-Crystal Piezocomposite Transducers

The ongoing robotic revolution in oceanic science puts new requirements on sonar technology. Small platforms require compact multi-purpose transducers, with strict requirements on power consumption and heat dissipation. Introducing single-crystal ferroelectrics as the active material of the transmitter can be one way of meeting the new requirements. The large electromechanical coupling coefficient of single crystals can enable an extension of the usable frequency band compared to conventional PZT. For the applications considered in this work, the usable frequency band is restricted by both the transmitted acoustic power and the reactive electrical power. Single crystals as the active materials can double the usable band, but the acoustic matching required for this can be difficult to obtain in practice. We investigated an air-backed, plane 1-3 composite transducer, matched to water by acoustic matching layers. For many applications, the diversity provided by a large usable frequency range is more important than a flat acoustic power response, and the transducer can be used far beyond the -3-dB limit. We defined the usable band by requiring maximum -12-dB ripple in transmitted acoustic power and maximum 50% reactive power. The matching layers were optimized to maximize the usable band according to this definition, in contrast to the conventional approach where matching layers are optimized for maximally flat response. Under the chosen definitions, our modeling showed that with a single crystal as the active material we could achieve 188% usable frequency band relative to the resonance frequency, compared to 121% for a PZT.

Shear-wave corner retroreflector device for ultrasonic measurement of viscosity

This work shows a novel ultrasonic viscosity measurement device with increased sensitivity. The measuring principle is based on the determination of the complex reflection coefficient of shear-waves at the solid-liquid interface. But the proposed approach is the replacement of the flat surface at the measurement interface with a grooved surface, which works in a similar way to an optical retroreflector. The complete reflection of the waves involves a double reflection with oblique incidence, where both phenomena increase sensitivity, in comparison with a plane surface. It is shown that a set of orthogonal flat interfaces reflects a well-defined ultrasonic pulse. The sensitivity is enough to measure the change in the magnitude and phase of the reflection coefficient even for the small portion of the energy transmitted to water. A model for calculating the viscosity and a calibration approach for the measurement were proposed. Results with samples of corn syrup-water mixture are reported.

Calcium-Modified Silk Patch as a Next-Generation Ultrasound Coupling Medium

There is an increasing interest in developing next-generation wearable ultrasound patch systems because of their wide range of applications, such as home healthcare systems and continuous monitoring systems for physiological conditions. A wearable ultrasound patch system requires a stable interface to the skin, an ultrasound coupling medium, a flexible transducer array, and miniaturized operating circuitries. In this study, we proposed a patch composed of calcium (Ca)-modified silk, which serves as both a stable interface and a coupling medium for ultrasound transducer arrays. The Ca-modified silk patch provided not only a stable and conformal interface between the epidermal ultrasound transducer and human skin with high adhesion but also offered acoustic impedance close to that of human skin. The Ca-modified silk patch was flexible and stretchable (∼400% strain) and could be attached to various materials. In addition, because the acoustic impedance of the Ca-modified silk patch was 2.15 MRayl, which was similar to that of human skin (1.99 MRayl), the ultrasound transmission loss of the proposed patch was relatively low (∼0.002 dB). We also verified the use of the Ca-modified silk patch in various ultrasound applications, including ultrasound imaging, ultrasound heating, and transcranial ultrasound stimulation for neuromodulation. The comparable performance of the Ca-modified patch to that of a commercial ultrasound gel and its durability against various environmental conditions confirmed that the Ca-modified silk patch could be a promising candidate as a coupling medium for next-generation ultrasound patch systems.

Quadruple ultrasound, photoacoustic, optical coherence, and fluorescence fusion imaging with a transparent ultrasound transducer

Ultrasound and optical imagers are used widely in a variety of biological and medical applications. In particular, multimodal implementations combining light and sound have been actively investigated to improve imaging quality. However, the integration of optical sensors with opaque ultrasound transducers suffers from low signal-to-noise ratios, high complexity, and bulky form factors, significantly limiting its applications. Here, we demonstrate a quadruple fusion imaging system using a spherically focused transparent ultrasound transducer that enables seamless integration of ultrasound imaging with photoacoustic imaging, optical coherence tomography, and fluorescence imaging. As a first application, we comprehensively monitored multiparametric responses to chemical and suture injuries in rats' eyes in vivo, such as corneal neovascularization, structural changes, cataracts, and inflammation. As a second application, we successfully performed multimodal imaging of tumors in vivo, visualizing melanomas without using labels and visualizing 4T1 mammary carcinomas using PEGylated gold nanorods. We strongly believe that the seamlessly integrated multimodal system can be used not only in ophthalmology and oncology but also in other healthcare applications with broad impact and interest.

Bioinspired metagel with broadband tunable impedance matching

To maximize energy transmission from a source through a media, the concept of impedance matching has been established in electrical, acoustic, and optical engineering. However, existing design of acoustic impedance matching, which extends exactly by a quarter wavelength, sets a fundamental limit of narrowband transmission. Here, we report a previously unknown class of bioinspired metagel impedance transformers to overcome this limit. The transformer embeds a two-dimensional metamaterial matrix of steel cylinders into hydrogel. Using experimental data of the biosonar from the Indo-Pacific humpback dolphin, we demonstrate through theoretical analysis that broadband transmission is achieved when the bioinspired acoustic impedance function is introduced. Furthermore, we experimentally show that the metagel device offers efficient implementation in broadband underwater ultrasound detection with the benefit of being soft and tunable. The bioinspired two-dimensional metagel breaks the length-wavelength dependence, which paves a previously unexplored way for designing next-generation broadband impedance matching devices in diverse wave engineering.

A Review of Acoustic Impedance Matching Techniques for Piezoelectric Sensors and Transducers

The coupling of waves between the piezoelectric generators, detectors, and propagating media is challenging due to mismatch in the acoustic properties. The mismatch leads to the reverberation of waves within the transducer, heating, low signal-to-noise ratio, and signal distortion. Acoustic impedance matching increases the coupling largely. This article presents standard methods to match the acoustic impedance of the piezoelectric sensors, actuators, and transducers with the surrounding wave propagation media. Acoustic matching methods utilizing active and passive materials have been discussed. Special materials such as nanocomposites, metamaterials, and metasurfaces as emerging materials have been presented. Emphasis is placed throughout the article to differentiate the difference between electric and acoustic impedance matching and the relation between the two. Comparison of various techniques is made with the discussion on capabilities, advantages, and disadvantages. Acoustic impedance matching for specific and uncommon applications has also been covered.

Non-Destructive Evaluation Techniques and What They Tell Us about Wood Property Variation

To maximize utilization of our forest resources, detailed knowledge of wood property variation and the impacts this has on end-product performance is required at multiple scales (within and among trees, regionally). As many wood properties are difficult and time-consuming to measure our knowledge regarding their variation is often inadequate as is our understanding of their responses to genetic and silvicultural manipulation. The emergence of many non-destructive evaluation (NDE) methodologies offers the potential to greatly enhance our understanding of the forest resource; however, it is critical to recognize that any technique has its limitations and it is important to select the appropriate technique for a given application. In this review, we will discuss the following technologies for assessing wood properties both in the field: acoustics, Pilodyn, Resistograph and Rigidimeter and the lab: computer tomography (CT) scanning, DiscBot, near infrared (NIR) spectroscopy, radial sample acoustics and SilviScan. We will discuss these techniques, explore their utilization, and list applications that best suit each methodology. As an end goal, NDE technologies will help researchers worldwide characterize wood properties, develop accurate models for prediction, and utilize field equipment that can validate the predictions. The continued advancement of NDE technologies will also allow researchers to better understand the impact on wood properties on product performance.

Design and experimental demonstration of broadband acoustic pressure enhancing passive metafluids

This paper presents the design and experimental demonstration of a passive broadband acoustic pressure enhancing metafluid in air. The design is optimized for fabrication via three-dimensional (3D) printing and takes advantage of the property of acoustic pressure to enhance sound as the sound passes with minimal insertion loss from the background medium into a high impedance fluid. Numerical simulations and experimental measurements of the fabricated structure show that the metafluid enhances the sound pressure level by 7 dB in more than one octave without introducing sound distortions. Moreover, the metafluid is subwavelength in size and does not increase the aperture of the sensor. These results provide an excellent path toward improving the sensitivity of compact acoustic sensors without employing active elements.

Near-zero effective impedance with finite phase velocity for sensing and actuation enhancement by resonator pairing

In spite of the extensive studies of zero-index metamaterials, the realization of zero impedance with finite phase velocity has not been explored. Here, we show that this extreme case, realized by elaborately-tuned paired resonators, can effectively enhance sensing and actuation. To explain the formation mechanism of the near-zero effective impedance with finite phase velocity by paired resonators at a target frequency, a theory using an equivalent model based on mechanical longitudinal waves is developed. If the frequency of the extreme property is further tuned at a Fabry-Pérot resonance frequency, highly efficient enhancement is possible. Experiments using a piezoceramic transducer (PZT) installed on the plate region bounded by two resonators confirm that the proposed extreme property mechanism highly enhances the sensing and actuation outputs of the transducer.

A Review of Tunable Acoustic Metamaterials

Acoustic metamaterial science is an emerging field at the frontier of modern acoustics. It provides a prominent platform for acoustic wave control in subwavelength-sized metadevices or metasystems. However, most of the metamaterials can only work in a narrow frequency band once fabricated, which limits the practical application of acoustic metamaterials. This paper highlights some recent progress in tunable acoustic metamaterials based on various modulation techniques. Acoustic metamaterials have been designed to control the attenuation of acoustic waves, invisibility cloaking, and acoustic wavefront engineering, such as focusing via manipulating the acoustic impedance of metamaterials. The reviewed techniques are promising in extending the novel acoustics response into wider frequency bands, in that tunable acoustic metamaterials may be exploited for unusual applications compared to conventional acoustic devices.

Metasurface for Water-to-Air Sound Transmission

Effective transmission of sound from water to air is crucial for the enhancement of the detection sensitivity of underwater sound. However, only 0.1% of the acoustic energy is naturally transmitted at such a boundary. At audio frequencies, quarter-wave plates or multilayered antireflection coatings are too bulky for practical use for such enhancement. Here we present an acoustic metasurface of a thickness of only ∼λ/100, where λ is the wavelength in air, consisting of an array of meta-atoms that each contain a set of membranes and an air-filled cavity. We experimentally demonstrate that such a meta-atom increases the transmission of sound at ∼700  Hz by 2 orders of magnitude, allowing about 30% of the incident acoustic power from water to be transmitted into air. Applications include underwater sonic sensing and communication.