1
|
Rahman Khan MM, Asrafali SP, Periyasamy T. Synthesis, Morphology, and Biomedical Applications of Plasma-Based Polymers: Recent Trends and Advances. Polymers (Basel) 2024; 16:2701. [PMID: 39408413 PMCID: PMC11479094 DOI: 10.3390/polym16192701] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/06/2024] [Revised: 09/18/2024] [Accepted: 09/23/2024] [Indexed: 10/20/2024] Open
Abstract
The achievement of large-scale applications of plasma-based polymers in biomedical sectors does not satisfy the appropriate level although a substantial amount of research is already performed. In this context, further investigations are necessary to design and synthesize plasma polymers for biomedical applications. Among the polymeric materials, plasma-based polymers have attracted substantial attention owing to their numerous advantages like faster processing, lower costs, eco-friendly waste, biocompatibility, and versatility, making them excellent materials for biomedical applications. Further, polymer synthesis using plasma polymerization techniques can avoid the time-consuming conventional multistep synthesis procedure. Plasma polymerization also offers a significant solution to overcome the numerous difficulties in the traditional approach where polymers can be directly attached to the desired surface using a plasma process, without disturbing the growing chain, and, thus, prevent an additional process such as grafting. Nevertheless, the design of appropriate plasma-based synthesis methods, optimization of the plasma process parameters, and exploration of polymer-based biocompatibility approaches are still challenging research areas. Regarding the surface morphological features of these plasma polymers, they possess several characteristics, such as wettability, adhesion capacity, and so on, that are important considerations in biomedical applications. In this review, numerous recent approaches to plasma polymerization methods along with different precursor phases used for such kind of synthesis of polymeric materials are discussed. The morphological aspect of the synthesized plasma polymers connected with biomedical applications is also reported in this review. Finally, promising aspects of plasma polymers for biomedical applications are briefly reported in this work. This review may offer an extensive reference for upcoming perceptions of plasma-based polymers and their applications in biomedical sectors.
Collapse
Affiliation(s)
- Mohammad Mizanur Rahman Khan
- Department of Mechanical Engineering, Gachon University, 1342 Seongnam-daero, Sujeong-gu, Seongnam-si 13120, Gyeonggi-do, Republic of Korea;
| | - Shakila Parveen Asrafali
- Department of Fiber System Engineering, Yeungnam University, 280 Daehak-Ro, Gyeongsan 38541, Gyeongbuk, Republic of Korea
| | - Thirukumaran Periyasamy
- Department of Fiber System Engineering, Yeungnam University, 280 Daehak-Ro, Gyeongsan 38541, Gyeongbuk, Republic of Korea
| |
Collapse
|
2
|
Jiang H, Zhang J, Weng Z, Chen L, Wu Y, Weng X. Flexible Microfluidic Strain Sensor Made with Poly(3,4-ethylenedioxythiophene):polystyrenesulfonate-MXene-Au Nanocomposites for Monitoring Physiological Signals. ACS APPLIED MATERIALS & INTERFACES 2024; 16:49745-49755. [PMID: 39226117 DOI: 10.1021/acsami.4c09173] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 09/05/2024]
Abstract
Flexible strain sensors have been widely used in wearable electronics. However, the fabrication of flexible strain sensors with a large strain detection range, high sensitivity, and negligible hysteresis remains a formidable challenge, even after enormous advancements in the field. Herein, a flexible microfluidic strain sensor was fabricated by filling poly(3,4-ethylenedioxythiophene):polystyrenesulfonate-MXene-gold (PEDOT:PSS-MXene-Au) nanocomposites into microchannels in an elastic matrix. Owing to the unique properties of the nanofiller and Ecoflex elastomer microchannel, the microfluidic strain sensor detected a strain of 0%-500% with low hysteresis (2.4%), high sensitivity (guage factor = 25.4), short response times (∼86 ms), and good durability. Moreover, the flexible microfluidic sensor was used to detect various physiological signals and human activities, control a mechanical hand, and capture hand motions in real time. As demonstrated by its good performance, the proposed flexible microfluidic sensor holds great potential in applications such as wearable electronics, physiological signal monitoring and human-machine interactions.
Collapse
Affiliation(s)
- Hai Jiang
- School of Mechanical and Electrical Engineering, University of Electronic Science and Technology of China, Chengdu, Sichuan 611731, China
- Institute of Electronic and Information Engineering of UESTC in Guangdong, Dongguan, Guangdong 523808, China
| | - Jiabo Zhang
- School of Mechanical and Electrical Engineering, University of Electronic Science and Technology of China, Chengdu, Sichuan 611731, China
| | - Zhiwei Weng
- School of Mechanical and Electrical Engineering, University of Electronic Science and Technology of China, Chengdu, Sichuan 611731, China
| | - Longyan Chen
- Department of Biomedical, Industrial & Systems Engineering, Gannon University, 109 University Square, Erie, Pennsylvania 16541, United States
| | - Yichuan Wu
- School of Mechanical and Electrical Engineering, University of Electronic Science and Technology of China, Chengdu, Sichuan 611731, China
- Institute of Electronic and Information Engineering of UESTC in Guangdong, Dongguan, Guangdong 523808, China
| | - Xuan Weng
- School of Mechanical and Electrical Engineering, University of Electronic Science and Technology of China, Chengdu, Sichuan 611731, China
- Institute of Electronic and Information Engineering of UESTC in Guangdong, Dongguan, Guangdong 523808, China
| |
Collapse
|
3
|
Aleksandrova M, Mateev V, Iliev I. Behavior of Polymer Electrode PEDOT:PSS/Graphene on Flexible Substrate for Wearable Biosensor at Different Loading Modes. NANOMATERIALS (BASEL, SWITZERLAND) 2024; 14:1357. [PMID: 39195395 DOI: 10.3390/nano14161357] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/22/2024] [Revised: 08/14/2024] [Accepted: 08/16/2024] [Indexed: 08/29/2024]
Abstract
In recent years, flexible and wearable biosensor technologies have gained significant attention due to their potential to revolutionize healthcare monitoring. Among the various components involved in these biosensors, the electrode material plays a crucial role in ensuring accurate and reliable detection. In this regard, polymer electrodes, such as Poly(3,4 ethylenedioxythiophene): poly(styrenesulfonate), combined with graphene (PEDOT:PSS/graphene), have emerged as promising candidates due to their unique mechanical properties and excellent electrical conductivity. Understanding the mechanical behavior of these polymer electrodes on flexible substrates is essential to ensure the stability and durability of wearable biosensors. In this paper, PEDOT:PSS/graphene composite was spray-coated on flexible substrates at different growth conditions to explore the effect of the deposition parameters and mode of mechanical loading (longitudinal or transversal) on the electrical and mechanical behavior of the fabricated samples. It was found that the coating grown at lower temperatures and higher spraying pressure exhibited stable behavior no matter the applied stress type.
Collapse
Affiliation(s)
- Mariya Aleksandrova
- Department of Microelectronics, Technical University of Sofia, 1000 Sofia, Bulgaria
| | - Valentin Mateev
- Department of Electrical Apparatus, Technical University of Sofia, 1000 Sofia, Bulgaria
| | - Ivo Iliev
- Department of Electronics, Technical University of Sofia, 1000 Sofia, Bulgaria
| |
Collapse
|
4
|
Tang J, Liu Z, Wang R, Wang Y, Zou Z, Xie J, Zhang P, Fu Z. Bio-Inspired Photosynthesis Platform for Enhanced NADH Conversion and L-Glutamate Synthesis. Polymers (Basel) 2024; 16:2198. [PMID: 39125224 PMCID: PMC11314224 DOI: 10.3390/polym16152198] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/29/2024] [Revised: 07/30/2024] [Accepted: 07/30/2024] [Indexed: 08/12/2024] Open
Abstract
Inspired by the layered structure, light absorption, and charge carrier pathway of chloroplast thylakoids in natural photosynthesis, we propose a novel artificial photosynthesis platform, which is composed of layered structured vaterite as the scaffold with gold nanoparticles (AuNPs), photosensitizer eosin Y (EY), and redox enzyme L-glutamate dehydrogenase (GDH) as the functional components. The EY exhibited significantly enhanced light absorption and charge carrier generation due to the localized surface plasmon resonance (LSPR) around the AuNPs and light refraction within the layers. This artificial photosynthesis platform can regenerate reduced nicotinamide adenine dinucleotide (NADH) under visible light and promote the rapid conversion of α-ketoglutarate to L-glutamate (0.453 Mm/h). The excellent biocompatibility of layered vaterite significantly enhances the resistance of GDH to harsh conditions, including high pH (pH = 10) and elevated temperatures (37-57 °C).
Collapse
Affiliation(s)
- Junxiao Tang
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, China; (J.T.); (R.W.); (Y.W.); (Z.Z.)
| | - Zhenyu Liu
- International School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China;
| | - Rongjie Wang
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, China; (J.T.); (R.W.); (Y.W.); (Z.Z.)
| | - Yanze Wang
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, China; (J.T.); (R.W.); (Y.W.); (Z.Z.)
| | - Zhaoyong Zou
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, China; (J.T.); (R.W.); (Y.W.); (Z.Z.)
| | - Jingjing Xie
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, China; (J.T.); (R.W.); (Y.W.); (Z.Z.)
| | - Pengchao Zhang
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, China; (J.T.); (R.W.); (Y.W.); (Z.Z.)
| | - Zhengyi Fu
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, China; (J.T.); (R.W.); (Y.W.); (Z.Z.)
| |
Collapse
|
5
|
Barabadi Z, Bahmani A, Jalalimonfared M, Ashrafizadeh M, Rashtbar M, Sharifi E, Tian H. Design and characterization of electroactive gelatin methacrylate hydrogel incorporated with gold nanoparticles empowered with parahydroxybenzaldehyde and curcumin for advanced tissue engineering applications. JOURNAL OF MATERIALS SCIENCE. MATERIALS IN MEDICINE 2024; 35:45. [PMID: 39073649 PMCID: PMC11286724 DOI: 10.1007/s10856-024-06808-9] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/31/2024] [Accepted: 06/14/2024] [Indexed: 07/30/2024]
Abstract
Electroconductive polymers are the materials of interest for the fabrication of electro-conductive tissues. Metal ions through the redox systems offer polymers with electrical conductivity. In this study, we processed a gelatin methacrylate (GelMA) network with gold nanoparticles (GNPs) through a redox system with parahydroxybenzaldehyde (PHB) or curcumin to enhance its electrical conductivity. Induction of the redox system with both PHB and curcumin into the GelMA, introduced some new functional groups into the polymeric network, as it has been confirmed by H-NMR and FTIR. These new bonds resulted in higher electro-conductivity when GNPs were added to the polymer. Higher electroactivity was achieved by PHB compared to the curcumin-induced redox system, and the addition of GNPs without redox system induction showed the lowest electroactivity. MTT was used to evaluate the biocompatibility of the resultant polymers, and the PHB-treated hydrogels showed higher proliferative effects on the cells. The findings of this study suggest that the introduction of a redox system by PHB in the GelMA network along with GNPs can contribute to the electrochemical properties of the material. This electroactivity can be advantageous for tissue engineering of electro-conductive tissues like cardiac and nervous tissues.
Collapse
Affiliation(s)
- Zahra Barabadi
- Research Center for Molecular Medicine, Hamadan University of Medical Sciences, Hamadan, Iran
- Department of Tissue Engineering and Biomaterials, School of Advanced Medical Sciences and Technologies, Hamadan University of Medical Sciences, Hamadan, Iran
| | - Asrin Bahmani
- Research Center for Molecular Medicine, Hamadan University of Medical Sciences, Hamadan, Iran
| | - Marzieh Jalalimonfared
- Department of Tissue Engineering and Applied Cell Sciences, School of Advanced Technologies in Medicine, Tehran University of Medical Sciences, Tehran, Iran
| | - Milad Ashrafizadeh
- Department of General Surgery, Institute of Precision Diagnosis and Treatment of Digestive System Tumors, Carson International Cancer Center, Shenzhen University General Hospital, Shenzhen University, Shenzhen, Guangdong, 518055, China
- International Association for Diagnosis and Treatment of Cancer, Shenzhen, Guangdong, 518055, China
- Shanghai Institute of Cardiovascular Diseases, Zhongshan Hospital, Fudan University, Shanghai, 200032, China
- Department of Radiation Oncology, Shandong Cancer Hospital and Institute, Shandong First Medical University and Shandong Academy of Medical Sciences, Jinan, Shandong, 250000, China
| | | | - Esmaeel Sharifi
- Research Center for Molecular Medicine, Hamadan University of Medical Sciences, Hamadan, Iran.
- Department of Tissue Engineering and Biomaterials, School of Advanced Medical Sciences and Technologies, Hamadan University of Medical Sciences, Hamadan, Iran.
- Cancer Research Center, Hamadan University of Medical Sciences, Hamadan, Iran.
| | - Haili Tian
- School of Exercise and Health, Shanghai University of Sport, Shanghai, 200438, China.
| |
Collapse
|
6
|
Nkosi NC, Basson AK, Ntombela ZG, Dlamini NG, Pullabhotla RVSR. Green Synthesis, Characterization and Application of Silver Nanoparticles Using Bioflocculant: A Review. Bioengineering (Basel) 2024; 11:492. [PMID: 38790359 PMCID: PMC11117625 DOI: 10.3390/bioengineering11050492] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/26/2024] [Revised: 05/08/2024] [Accepted: 05/11/2024] [Indexed: 05/26/2024] Open
Abstract
Nanotechnology has emerged as an effective means of removing contaminants from water. Traditional techniques for producing nanoparticles, such as physical methods (condensation and evaporation) and chemical methods (oxidation and reduction), have demonstrated high efficiency. However, these methods come with certain drawbacks, including the significant energy requirement and the use of costly and hazardous chemicals that may cause nanoparticles to adhere to surfaces. To address these limitations, researchers are actively developing alternative procedures that are cost-effective, environmentally safe, and user-friendly. One promising approach involves biological synthesis, which utilizes plants or microorganisms as reducing and capping agents. This review discusses various methods of nanoparticle synthesis, with a focus on biological synthesis using naturally occurring bioflocculants from microorganisms. Bioflocculants offer several advantages, including harmlessness, biodegradability, and minimal secondary pollution. Furthermore, the review covers the characterization of synthesized nanoparticles, their antimicrobial activity, and cytotoxicity. Additionally, it explores the utilization of these NPs in water purification and dye removal processes.
Collapse
Affiliation(s)
- Nkanyiso C. Nkosi
- Biochemistry and Microbiology Department, Faculty of Science, Agriculture, and Engineering, P/Bag X1001, University of Zululand, KwaDlangezwa 3886, South Africa; (A.K.B.); (Z.G.N.); (N.G.D.)
| | - Albertus K. Basson
- Biochemistry and Microbiology Department, Faculty of Science, Agriculture, and Engineering, P/Bag X1001, University of Zululand, KwaDlangezwa 3886, South Africa; (A.K.B.); (Z.G.N.); (N.G.D.)
| | - Zuzingcebo G. Ntombela
- Biochemistry and Microbiology Department, Faculty of Science, Agriculture, and Engineering, P/Bag X1001, University of Zululand, KwaDlangezwa 3886, South Africa; (A.K.B.); (Z.G.N.); (N.G.D.)
| | - Nkosinathi G. Dlamini
- Biochemistry and Microbiology Department, Faculty of Science, Agriculture, and Engineering, P/Bag X1001, University of Zululand, KwaDlangezwa 3886, South Africa; (A.K.B.); (Z.G.N.); (N.G.D.)
| | - Rajasekhar V. S. R. Pullabhotla
- Chemistry Department, Faculty of Science, Agriculture, and Engineering, P/Bag X1001, University of Zululand, KwaDlangezwa 3886, South Africa
| |
Collapse
|
7
|
del Valle MA, Gacitúa MA, Hernández F, Luengo M, Hernández LA. Nanostructured Conducting Polymers and Their Applications in Energy Storage Devices. Polymers (Basel) 2023; 15:1450. [PMID: 36987228 PMCID: PMC10054839 DOI: 10.3390/polym15061450] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/03/2023] [Revised: 02/23/2023] [Accepted: 02/27/2023] [Indexed: 03/17/2023] Open
Abstract
Due to the energy requirements for various human activities, and the need for a substantial change in the energy matrix, it is important to research and design new materials that allow the availability of appropriate technologies. In this sense, together with proposals that advocate a reduction in the conversion, storage, and feeding of clean energies, such as fuel cells and electrochemical capacitors energy consumption, there is an approach that is based on the development of better applications for and batteries. An alternative to commonly used inorganic materials is conducting polymers (CP). Strategies based on the formation of composite materials and nanostructures allow outstanding performances in electrochemical energy storage devices such as those mentioned. Particularly, the nanostructuring of CP stands out because, in the last two decades, there has been an important evolution in the design of various types of nanostructures, with a strong focus on their synergistic combination with other types of materials. This bibliographic compilation reviews state of the art in this area, with a special focus on how nanostructured CP would contribute to the search for new materials for the development of energy storage devices, based mainly on the morphology they present and on their versatility to be combined with other materials, which allows notable improvements in aspects such as reduction in ionic diffusion trajectories and electronic transport, optimization of spaces for ion penetration, a greater number of electrochemically active sites and better stability in charge/discharge cycles.
Collapse
Affiliation(s)
- M. A. del Valle
- Laboratorio de Electroquímica de Polímeros, Pontificia Universidad Católica de Chile, Av. V. Mackenna 4860, Santiago 7820436, Chile
| | - M. A. Gacitúa
- Facultad de Ingeniería y Ciencias, Universidad Diego Portales, Ejército 441, Santiago 8370191, Chile
| | - F. Hernández
- Laboratorio de Electroquímica, Instituto de Química y Bioquímica, Facultad de Ciencias, Universidad de Valparaíso, Av. Gran Bretaña 1111, Playa Ancha, Valparaíso 2340000, Chile
| | - M. Luengo
- Laboratorio de Electroquímica, Instituto de Química y Bioquímica, Facultad de Ciencias, Universidad de Valparaíso, Av. Gran Bretaña 1111, Playa Ancha, Valparaíso 2340000, Chile
| | - L. A. Hernández
- Laboratorio de Electroquímica, Instituto de Química y Bioquímica, Facultad de Ciencias, Universidad de Valparaíso, Av. Gran Bretaña 1111, Playa Ancha, Valparaíso 2340000, Chile
| |
Collapse
|
8
|
Conductive organic electrodes for flexible electronic devices. Sci Rep 2023; 13:4125. [PMID: 36914727 PMCID: PMC10011527 DOI: 10.1038/s41598-023-30207-9] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/27/2022] [Accepted: 02/17/2023] [Indexed: 03/14/2023] Open
Abstract
The paper reports on a novel process flow to manufacture conductive organic electrodes from highly conductive doped PEDOT:PSS polymer films that can be patterned and display a good adhesion to oxidized Si wafers as well as to flexible substrates, such as Mylar. Among other results, it is shown that multiple depositions of PEDOT:PSS increase the electrical conductivity by more than two orders of magnitude without increasing the film thickness of PEDOT:PSS significantly. An exponential dependence between sheet resistance and the number of PEDOT:PSS coatings has been found. The electrical conductivity of PEDOT:PSS can be increased by another two orders of magnitude doping with Cu nanoparticles when coated on the surface of a soft-baked PEDOT:PSS film. It is found, however, that both kinds of conductivity enhancement are not additive. Adhesion of PEDOT:PSS to oxidized Si wafers and BoPET (Mylar) has been ensured by applying an oxygen plasma cleaning step before spin coating. The manufactured high-conductivity PEDOT:PSS film can be patterned using a sacrificial metal layer with subsequent etching of PEDOT:PSS in oxygen plasma, followed by the removal of the patterned segments of the sacrificial metal layer in an aqueous acid solution.
Collapse
|
9
|
Izadyar A, Van MN, Miranda M, Weatherford S, Hood EE, Seok I. Development of a highly sensitive glucose nanocomposite biosensor based on recombinant enzyme from corn. JOURNAL OF THE SCIENCE OF FOOD AND AGRICULTURE 2022; 102:6530-6538. [PMID: 35587543 DOI: 10.1002/jsfa.12019] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/14/2022] [Revised: 05/11/2022] [Accepted: 05/19/2022] [Indexed: 06/15/2023]
Abstract
BACKGROUND Enzymes are biocatalysts that play a vital role in the production of biomolecules. Plants can be a valuable and cost-effective source for producing well-structured recombinant enzymes. Glucose is one of the most important biological molecules, providing energy to most living systems. An electrochemical method for immobilization of enzyme is promising because it is economic, generates less component waste, improves the signal-to-noise ratio, leads to a lower limit of detection, and stabilizes and protects the enzyme structure. RESULTS A glucose biosensor was constructed using polyaniline (PANI) and a recombinant enzyme from corn, plant-produced manganese peroxidase (PPMP), with polymerization of aniline as a monomer in the presence of gold nanoparticles (AuNPs)-glucose oxidase (GOx), and bovine serum albumin. Using linear sweep voltammetry and cyclic voltammetry techniques, PANI-AuNPs-GOx-PPMP/Au electrode exhibited a superior sensing property with a wider linear range of 0.005-16.0 mm, and a lower detection limit of 0.001 mm compared to PANI-GOx-PPMP/Au electrode and PANI-GOx-PPMP/AuNPs/Au electrode. The biosensor selectivity was assessed by determining glucose concentrations in the presence of ascorbic acid, dopamine, aspartame, and caffeine. CONCLUSION We conclude that a plant-produced Mn peroxidase enzyme combined with conductive polymers and AuNPs results in a promising nanocomposite biosensor for detecting glucose. The use of such devices for quality control in the food industry can have a significant economic impact. © 2022 Society of Chemical Industry.
Collapse
Affiliation(s)
- Anahita Izadyar
- Department of Chemistry and Physics, Arkansas State University, Jonesboro, AR, USA
| | - My Ni Van
- Department of Chemistry and Physics, Arkansas State University, Jonesboro, AR, USA
| | - Marcela Miranda
- Department of Chemistry and Physics, Arkansas State University, Jonesboro, AR, USA
| | - Scout Weatherford
- Department of Chemistry and Physics, Arkansas State University, Jonesboro, AR, USA
| | - Elizabeth E Hood
- Arkansas Biosciences Institute and College of Agriculture, Arkansas State University, Jonesboro, AR, USA
| | - Ilwoo Seok
- College of Engineering and Computer Science, Arkansas State University, Jonesboro, AR, USA
| |
Collapse
|
10
|
Saha P, Akter R, Shah SS, Mahfoz W, Aziz MA, Ahammad AJS. Gold Nanomaterials and their Composites as Electrochemical Sensing Platforms for Nitrite Detection. Chem Asian J 2022; 17:e202200823. [PMID: 36039466 DOI: 10.1002/asia.202200823] [Citation(s) in RCA: 9] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/07/2022] [Revised: 08/29/2022] [Indexed: 02/01/2023]
Abstract
Nitrite is one of the abundant toxic components existing in the environment and is likely to have a great potential to affect human health badly. For that reason, it has become crucial to build a reliable nitrite detection method. In recent years, several nitrite monitoring systems have been proposed. Compared with traditional analytical strategies, the electrochemical approach has a bunch of advantages, including low cost, rapid response, easy operation, simplicity, etc. In this case, noble metal nanomaterials, especially Au-based nanomaterials, have attracted attention in electrode modification because of higher catalytic activity, facile mass transfer, and broad active area for determining nitrite. This review is based on the state-of-the-art, which includes a variety of nanomaterials that have been coupled with AuNPs for the creation of nanocomposites, and the construction as well as development of electrochemical sensors for nitrite detection over the last few years (2016-2022). A background study on synthesizing different morphological AuNPs and nanocomposites has also been introduced. The fabrication methods and sensing capabilities of modified electrodes are given special consideration.
Collapse
Affiliation(s)
- Protity Saha
- Jagannath University, Chemistry, Department of Chemistry, 1100, BANGLADESH
| | - Riva Akter
- Jagannath University, Chemistry, Department of Chemistry, 1100, BANGLADESH
| | - Syed Shaheen Shah
- King Fahd University of Petroleum & Minerals, Physics Department, Building 6, 31261, Dhahran, SAUDI ARABIA
| | - Wael Mahfoz
- King Fahd University of Petroleum & Minerals, Chemistry, Chemistry Department, 31261, Dhahran, SAUDI ARABIA
| | - Md Abdul Aziz
- King Fahd University of Petroleum & Minerals, Center of Research excellence in Nanotechnology, KFUPM Box # 81, 31261, Dhahran, SAUDI ARABIA
| | - A J Saleh Ahammad
- Jagannath University, Chemistry, Department of Chemistry, 1100, BANGLADESH
| |
Collapse
|
11
|
Kasprzak C, Brown JR, Feller K, Scott PJ, Meenakshisundaram V, Williams C, Long T. Vat Photopolymerization of Reinforced Styrene-Butadiene Elastomers: A Degradable Scaffold Approach. ACS APPLIED MATERIALS & INTERFACES 2022; 14:18965-18973. [PMID: 35421307 DOI: 10.1021/acsami.2c03410] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
Vat photopolymerization (VP) is a high-throughput additive manufacturing modality that also offers exceptional feature resolution and surface finish; however, the process is constrained by a limited selection of processable photocurable resins. Low resin viscosity (<10 Pa·s) is one of the most stringent process-induced constraints on resin processability, which in turn limits the mechanical performance of printed resin systems. Recently, the authors created a VP-processable photosensitive latex resin, where compartmentalization of the high molecular weight polymer chains into discrete particles resulted in the decoupling of viscosity from molecular weight. However, the monomers used to form the hydrogel green body resulted in decreased ultimate material properties due to the high cross-link density. Herein, we report a novel scaffold that allows for facile UV-based AM and simultaneously enhances the final part's material properties. This is achieved with a chemically labile acetal-containing cross-linker in conjunction with N-vinylpyrrolidone, which forms a glassy polymer after photocuring. Subsequent reactive extraction cleaves the cross-links and liberates the glassy polymer, which provides mechanical reinforcement of the geometrically complex VP-printed elastomer. With only a 0.1 wt % loading of photoinitiator, G'/G'' crossover times of less than 1 s and green body plateau moduli nearing 105 Pa are obtained. In addition, removal of the hydrophilic and thermally labile scaffold results in decreased water uptake and increased thermal stability of the final printed part. Ultimate strain and stress values of over 650% and 8.5 MPa, respectively, are achieved, setting a new benchmark for styrene-butadiene VP elastomers.
Collapse
Affiliation(s)
- Christopher Kasprzak
- Macromolecules Innovation Institute (MII), Virginia Tech, Blacksburg, Virginia 24061, United States
- Department of Chemistry, Virginia Tech, Blacksburg, Virginia 24061, United States
| | - James R Brown
- School of Molecular Sciences, Biodesign Center for Sustainable Macromolecular Materials and Manufacturing, Arizona State University, Tempe, Arizona 85281, United States
| | - Keyton Feller
- Macromolecules Innovation Institute (MII), Virginia Tech, Blacksburg, Virginia 24061, United States
- Department of Mechanical Engineering, Virginia Tech, Blacksburg, Virginia 24061, United States
| | - Philip J Scott
- Macromolecules Innovation Institute (MII), Virginia Tech, Blacksburg, Virginia 24061, United States
- Department of Chemistry, Virginia Tech, Blacksburg, Virginia 24061, United States
| | - Viswanath Meenakshisundaram
- Macromolecules Innovation Institute (MII), Virginia Tech, Blacksburg, Virginia 24061, United States
- Department of Mechanical Engineering, Virginia Tech, Blacksburg, Virginia 24061, United States
| | - Chris Williams
- Macromolecules Innovation Institute (MII), Virginia Tech, Blacksburg, Virginia 24061, United States
- Department of Mechanical Engineering, Virginia Tech, Blacksburg, Virginia 24061, United States
| | - Timothy Long
- School of Molecular Sciences, Biodesign Center for Sustainable Macromolecular Materials and Manufacturing, Arizona State University, Tempe, Arizona 85281, United States
| |
Collapse
|
12
|
Taha A, Da’na E. Phyto-Assisted Assembly of Metal Nanoparticles in Chitosan Matrix Using S. argel Leaf Extract and Its Application for Catalytic Oxidation of Benzyl Alcohol. Polymers (Basel) 2022; 14:766. [PMID: 35215679 PMCID: PMC8879489 DOI: 10.3390/polym14040766] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/01/2022] [Revised: 02/11/2022] [Accepted: 02/13/2022] [Indexed: 02/04/2023] Open
Abstract
The design and synthesis of eco-friendly solid-supported metal nanoparticles with remarkable stability and catalytic performance have gained much attention for both industrial and environmental applications. This study provides a novel, low-cost, simple, and eco-friendly approach for decorating cross-linked chitosan with gold nanoparticles (AuNPs), greenly prepared with Solenostemma argel (S. argel) leaf extract under mild conditions. Glutaraldehyde-modified chitosan beads were used to coordinate with Au(III) ions and act as stabilizing agents, and S. argel leaf extract was used as a cost-effective phyto-reducing agent to reduce gold ions to elemental Au nanoparticles. The successful cross-linking of chitosan with glutaraldehyde, the coordination of Au(III) ions into the chitosan matrix, and the phytochemical reduction of Au(III) to Au nanoparticles were investigated via FT-IR spectroscopy. The obtained Au nanoparticles have a uniform spherical shape and size <10 nm, as confirmed by both X-ray diffraction (XRD) (~8.8 nm) and TEM (6.0 ± 3 nm). The uniformity of the AuNPs' size was confirmed by Scanning Electron Microscopy (SEM) and Transition Electron Microscopy (TEM). The powder X-ray diffraction technique showed crystalline AuNPs with a face-centered cubic structure. The elemental analysis and the Energy Dispersive Spectroscopy (EDS) analysis both confirmed the successful integration of Au nanoparticles with the chitosan network. The catalytic activity of this highly stable nanocomposite was systematically investigated via the selective oxidation of benzyl alcohol to benzaldehyde. Results showed a remarkable conversion (97%) and excellent selectivity (99%) in the formation of benzaldehyde over other side products.
Collapse
Affiliation(s)
- Amel Taha
- Department of Chemistry, College of Science, King Faisal University, P.O. Box 400, Al-Ahsa 31982, Saudi Arabia;
| | - Enshirah Da’na
- Department of Biomedical Engineering, College of Engineering, King Faisal University, P.O. Box 400, Al-Ahsa 31982, Saudi Arabia
| |
Collapse
|
13
|
Cyganowski P, Wolska J. Nanocomposite membranes with Au nanoparticles for dialysis-based catalytic reduction-separation of nitroaromatic compounds. REACT FUNCT POLYM 2022. [DOI: 10.1016/j.reactfunctpolym.2021.105119] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/19/2022]
|
14
|
Xuan LTQ, Nguyen LN, Dao NT. Synthesis of stabilizer-free, homogeneous gold nanoparticles by cold atmospheric-pressure plasma jet and their optical sensing property. NANOTECHNOLOGY 2021; 33:105603. [PMID: 34814120 DOI: 10.1088/1361-6528/ac3c7f] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/15/2021] [Accepted: 11/23/2021] [Indexed: 06/13/2023]
Abstract
Recently, cold atmospheric-pressure plasma has been studied extensively as an efficient and green method to synthesize gold nanoparticles (AuNPs). Although the characteristics of the AuNPs, especially their homogeneousness, depend very much on the plasma synthesis parameters, there is a lack of a study involving these parameters systematically. Moreover, most of AuNPs-cold-plasma synthesis reports so far either required organic capping agents or resulted in highly non-uniform AuNPs. In this work, we systematically study the effect of most important synthesis parameters- including distance from the plasma jet to the solution, gas flow rate, plasma frequency, volume and concentration of the precursor, plasma interaction time as well as the effect of the synthesis environment (humidity and temperature)-on the uniformity of the AuNPs. Through various characterization measurements, we show that homogeneous and highly stable intrinsic AuNPs with an average size of 45 nm can be obtained with optimized synthesis parameters and in the absence of a stabilizer. The synthesized AuNPs yield advanced optical sensing properties in comparison with commercial AuNPs and can be further applied in developing versatile and high-sensitivity biosensors.
Collapse
Affiliation(s)
- Le Thi Quynh Xuan
- Laboratory of Plasma Technology, Institute of Materials Sciences (IMS), Vietnam Academy of Science and Technology (VAST), Hanoi, Vietnam
- Graduate University of Science and Technology (GUST), VAST, Vietnam
| | - Linh Nhat Nguyen
- Laboratory of Plasma Technology, Institute of Materials Sciences (IMS), Vietnam Academy of Science and Technology (VAST), Hanoi, Vietnam
| | - Nguyen Thuan Dao
- Laboratory of Plasma Technology, Institute of Materials Sciences (IMS), Vietnam Academy of Science and Technology (VAST), Hanoi, Vietnam
- Graduate University of Science and Technology (GUST), VAST, Vietnam
| |
Collapse
|
15
|
Potential Application of Pin-to-Liquid Dielectric Barrier Discharge Structure in Decomposing Aqueous Phosphorus Compounds for Monitoring Water Quality. MATERIALS 2021; 14:ma14247559. [PMID: 34947158 PMCID: PMC8706503 DOI: 10.3390/ma14247559] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/26/2021] [Revised: 12/03/2021] [Accepted: 12/07/2021] [Indexed: 11/30/2022]
Abstract
Here, we proposed a pin-to-liquid dielectric barrier discharge (DBD) structure that used a water-containing vessel body as a dielectric barrier for the stable and effective treatment of aqueous solutions in an open atmosphere. To obtain an intense pin-to-liquid alternating current discharge using a dielectric barrier, discharge characteristics, including the area and shape of a ground-plate-type electrode, were investigated after filling the vessel with equivalent amounts of water. Consequently, as the area of the ground electrode increased, the discharge current became stronger, and its timing became faster. Moreover, we proposed that the pin-to-liquid DBD reactor could be used to decompose phosphorus compounds in water in the form of phosphate as a promising pretreatment method for monitoring total phosphorus in water. The decomposition of phosphorus compounds using the pin-to-liquid DBD reactor demonstrated excellent performance—comparable to the thermochemical pretreatment method—which could be a standard pretreatment method for decomposing phosphorus compounds in water.
Collapse
|
16
|
Jang HJ, Jung EY, Parsons T, Tae HS, Park CS. A Review of Plasma Synthesis Methods for Polymer Films and Nanoparticles under Atmospheric Pressure Conditions. Polymers (Basel) 2021; 13:polym13142267. [PMID: 34301024 PMCID: PMC8309454 DOI: 10.3390/polym13142267] [Citation(s) in RCA: 17] [Impact Index Per Article: 5.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/25/2021] [Revised: 07/02/2021] [Accepted: 07/06/2021] [Indexed: 02/06/2023] Open
Abstract
In this paper, we present an overview of recent approaches in the gas/aerosol-through-plasma (GATP) and liquid plasma methods for synthesizing polymer films and nanoparticles (NPs) using an atmospheric-pressure plasma (APP) technique. We hope to aid students and researchers starting out in the polymerization field by compiling the most commonly utilized simple plasma synthesis methods, so that they can readily select a method that best suits their needs. Although APP methods are widely employed for polymer synthesis, and there are many related papers for specific applications, reviews that provide comprehensive coverage of the variations of APP methods for polymer synthesis are rarely reported. We introduce and compile over 50 recent papers on various APP polymerization methods that allow us to discuss the existing challenges and future direction of GATP and solution plasma methods under ambient air conditions for large-area and mass nanoparticle production.
Collapse
Affiliation(s)
- Hyo Jun Jang
- School of Electronic and Electrical Engineering, College of IT Engineering, Kyungpook National University, Daegu 41566, Korea; (H.J.J.); (E.Y.J.)
| | - Eun Young Jung
- School of Electronic and Electrical Engineering, College of IT Engineering, Kyungpook National University, Daegu 41566, Korea; (H.J.J.); (E.Y.J.)
| | - Travis Parsons
- GBS (Global Business Services) IT, The Procter & Gamble Company, Cincinnati, OH 45202, USA;
| | - Heung-Sik Tae
- School of Electronic and Electrical Engineering, College of IT Engineering, Kyungpook National University, Daegu 41566, Korea; (H.J.J.); (E.Y.J.)
- School of Electronics Engineering, College of IT Engineering, Kyungpook National University, Daegu 41566, Korea
- Correspondence: (H.-S.T.); (C.-S.P.)
| | - Choon-Sang Park
- Department of Electronics and Computer Engineering, College of Engineering, Kansas State University, Manhattan, KS 66506, USA
- Correspondence: (H.-S.T.); (C.-S.P.)
| |
Collapse
|
17
|
Nguyen LN, Lamichhane P, Choi EH, Lee GJ. Structural and Optical Sensing Properties of Nonthermal Atmospheric Plasma-Synthesized Polyethylene Glycol-Functionalized Gold Nanoparticles. NANOMATERIALS 2021; 11:nano11071678. [PMID: 34202388 PMCID: PMC8306114 DOI: 10.3390/nano11071678] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/12/2021] [Revised: 06/09/2021] [Accepted: 06/22/2021] [Indexed: 12/27/2022]
Abstract
Polyethylene glycol-functionalized gold nanoparticles (Au@PEG NPs) were prepared by a simple plasma-assisted method without additional reducing chemicals. After irradiating tetrachloroauric acid (HAuCl4) and polyethylene glycol (PEG) in aqueous medium with an argon plasma jet, the gold precursor transformed into an Au@PEG NP colloid that exhibited surface plasma resonance at 530 nm. When the plasma jet entered the water, additional reactive species were induced through interactions between plasma-generated reactive species and aqueous media. Interaction of the gold precursor with the plasma-activated medium allowed the synthesis of gold nanoparticles (AuNPs) without reductants. The plasma-synthesized Au@PEG NPs had a quasi-spherical shape with an average particle diameter of 32.5 nm. The addition of PEG not only helped to stabilize the AuNPs but also increased the number of AuNPs. Au@PEG NP-loaded paper (AuNP-paper) was able to detect the degradation of rhodamine B, therefore, indicating that AuNP-paper can act as a surface-enhanced Raman scattering platform. Dye degradation by plasma treatment was investigated by optical absorption and Raman spectroscopy. The method proposed for the fabrication of Au@PEG NPs is rapid, low-cost, and environment-friendly and will facilitate the application of plasma-synthesized nanomaterials in sensors.
Collapse
Affiliation(s)
- Linh Nhat Nguyen
- Department of Electrical and Biological Physics, Kwangwoon University, Seoul 01897, Korea; (L.N.N.); (P.L.); (E.H.C.)
- Plasma Bioscience Research Center, Kwangwoon University, Seoul 01897, Korea
- Laboratory of Plasma Technology, Institute of Materials Science, Vietnam Academy of Science and Technology, 18 Hoang Quoc Viet, Hanoi 100000, Vietnam
| | - Pradeep Lamichhane
- Department of Electrical and Biological Physics, Kwangwoon University, Seoul 01897, Korea; (L.N.N.); (P.L.); (E.H.C.)
- Plasma Bioscience Research Center, Kwangwoon University, Seoul 01897, Korea
| | - Eun Ha Choi
- Department of Electrical and Biological Physics, Kwangwoon University, Seoul 01897, Korea; (L.N.N.); (P.L.); (E.H.C.)
- Plasma Bioscience Research Center, Kwangwoon University, Seoul 01897, Korea
| | - Geon Joon Lee
- Department of Electrical and Biological Physics, Kwangwoon University, Seoul 01897, Korea; (L.N.N.); (P.L.); (E.H.C.)
- Plasma Bioscience Research Center, Kwangwoon University, Seoul 01897, Korea
- Correspondence: ; Tel.: +82-2-940-8619
| |
Collapse
|
18
|
Rahmati S, Doherty W, Amani Babadi A, Akmal Che Mansor MS, Julkapli NM, Hessel V, Ostrikov K(K. Gold-Carbon Nanocomposites for Environmental Contaminant Sensing. MICROMACHINES 2021; 12:mi12060719. [PMID: 34205255 PMCID: PMC8234806 DOI: 10.3390/mi12060719] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/09/2021] [Revised: 06/14/2021] [Accepted: 06/16/2021] [Indexed: 11/16/2022]
Abstract
The environmental crisis, due to the rapid growth of the world population and globalisation, is a serious concern of this century. Nanoscience and nanotechnology play an important role in addressing a wide range of environmental issues with innovative and successful solutions. Identification and control of emerging chemical contaminants have received substantial interest in recent years. As a result, there is a need for reliable and rapid analytical tools capable of performing sample analysis with high sensitivity, broad selectivity, desired stability, and minimal sample handling for the detection, degradation, and removal of hazardous contaminants. In this review, various gold–carbon nanocomposites-based sensors/biosensors that have been developed thus far are explored. The electrochemical platforms, synthesis, diverse applications, and effective monitoring of environmental pollutants are investigated comparatively.
Collapse
Affiliation(s)
- Shahrooz Rahmati
- School of Chemistry and Physics, Queensland University of Technology (QUT), Brisbane 4000, Australia;
- Centre for Agriculture and the Bioeconomy, Institute for Future Environments, Queensland University of Technology (QUT), Brisbane 4000, Australia;
- Centre for Material Science, Queensland University of Technology (QUT), Queensland, Brisbane, Brisbane 4000, Australia
- Nanotechnology & Catalysis Research Centre (NANOCAT), Institute of Graduate Studies, University of Malaya, Kuala Lumpur 50603, Malaysia;
- Correspondence: (S.R.); (N.M.J.)
| | - William Doherty
- Centre for Agriculture and the Bioeconomy, Institute for Future Environments, Queensland University of Technology (QUT), Brisbane 4000, Australia;
| | - Arman Amani Babadi
- Functional Omics and Bioprocess Development Laboratory, Institute of Biological Sciences, Faculty of Science, University of Malaya, Kuala Lumpur 50603, Malaysia;
| | - Muhamad Syamim Akmal Che Mansor
- Nanotechnology & Catalysis Research Centre (NANOCAT), Institute of Graduate Studies, University of Malaya, Kuala Lumpur 50603, Malaysia;
| | - Nurhidayatullaili Muhd Julkapli
- Nanotechnology & Catalysis Research Centre (NANOCAT), Institute of Graduate Studies, University of Malaya, Kuala Lumpur 50603, Malaysia;
- Correspondence: (S.R.); (N.M.J.)
| | - Volker Hessel
- School of Chemical Engineering and Advanced Materials, The University of Adelaide, Adelaide 5005, Australia;
- School of Engineering, University of Warwick, Library Rd, Coventry CV4 7AL, UK
| | - Kostya (Ken) Ostrikov
- School of Chemistry and Physics, Queensland University of Technology (QUT), Brisbane 4000, Australia;
- Centre for Agriculture and the Bioeconomy, Institute for Future Environments, Queensland University of Technology (QUT), Brisbane 4000, Australia;
- Centre for Material Science, Queensland University of Technology (QUT), Queensland, Brisbane, Brisbane 4000, Australia
| |
Collapse
|
19
|
Khan M, Boumati S, Arib C, Thierno Diallo A, Djaker N, Doan BT, Spadavecchia J. Doxorubicin (DOX) Gadolinium-Gold-Complex: A New Way to Tune Hybrid Nanorods as Theranostic Agent. Int J Nanomedicine 2021; 16:2219-2236. [PMID: 33762822 PMCID: PMC7982711 DOI: 10.2147/ijn.s295809] [Citation(s) in RCA: 10] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/09/2020] [Accepted: 02/06/2021] [Indexed: 12/20/2022] Open
Abstract
INTRODUCTION In this paper, we have designed and formulated, a novel synthesis of doxorubicin (DOX) loaded bimetallic gold nanorods in which gold salt (HAuCl4) is chelated with anthracycline (DOX), diacid polyethylene-glycol (PEG-COOH) and gadolinium salt (GdCl3 * 6 H2O) to form DOX IN-Gd-AuNRs compared with DOX ON-Gd-AuNRs in which the drug was grafted onto the bimetallic pegylated nanoparticle surface by electrostatic adsorption. MATERIAL AND METHOD The physical and chemical evaluation was performed by spectroscopic analytical techniques (Raman spectroscopy, UV-Visible and transmission electron microscopy (TEM)). Magnetic features at 7T were also measured. Photothermal abilities were assessed. Cytotoxicity studies on MIA PaCa-2, human pancreatic carcinoma and TIB-75 hepatocytes cell lines were carried out to evaluate their biocompatibility and showed a 320 fold higher efficiency for DOX after encapsulation. RESULTS Exhaustive physicochemical characterization studies were conducted showing a mid size of 20 to 40 nm diameters obtained with low polydispersity, efficient synthesis using seed mediated synthesis with chelation reaction with high scale-up, long duration stability, specific doxorubicin release with acidic pH, strong photothermal abilities at 808 nm in the NIR transparency window, strong magnetic r1 relaxivities for positive MRI, well adapted for image guided therapy and therapeutical purpose in biological tissues. CONCLUSION In this paper, we have developed a novel theranostic nanoparticle composed of gadolinium complexes to gold ions, with a PEG biopolymer matrix conjugated with antitumoral doxorubicin, providing multifunctional therapeutic features. Particularly, these nano conjugates enhanced the cytotoxicity toward tumoral MIAPaCa-2 cells by a factor of 320 compared to doxorubicin alone. Moreover, MRI T1 features at 7T enables interesting positive contrast for bioimaging and their adapted size for potential passive targeting to tumors by Enhanced Permeability Retention. Given these encouraging antitumoral and imaging properties, this bimetallic theranostic nanomaterial system represents a veritable promise as a therapeutic entity in the field of medicinal applications.
Collapse
Affiliation(s)
- Memona Khan
- CNRS, UMR 7244, CSPBAT, Laboratoire de Chimie, Structures et Propriétés de Biomatériaux et d’Agents Thérapeutiques, Université Sorbonne Paris Nord, Bobigny, 93000, France
| | - Sarah Boumati
- CNRS UMR 8060, iCLeHS, Synthèse, Electrochimie, Imagerie et Systèmes Analytiques Pour le Diagnostic SEISAD, Chimie ParisTech, Université PSL, Paris, 75231, France
| | - Celia Arib
- CNRS, UMR 7244, CSPBAT, Laboratoire de Chimie, Structures et Propriétés de Biomatériaux et d’Agents Thérapeutiques, Université Sorbonne Paris Nord, Bobigny, 93000, France
| | - Amadou Thierno Diallo
- CNRS, UMR 7244, CSPBAT, Laboratoire de Chimie, Structures et Propriétés de Biomatériaux et d’Agents Thérapeutiques, Université Sorbonne Paris Nord, Bobigny, 93000, France
| | - Nadia Djaker
- CNRS, UMR 7244, CSPBAT, Laboratoire de Chimie, Structures et Propriétés de Biomatériaux et d’Agents Thérapeutiques, Université Sorbonne Paris Nord, Bobigny, 93000, France
| | - Bich-thuy Doan
- CNRS UMR 8060, iCLeHS, Synthèse, Electrochimie, Imagerie et Systèmes Analytiques Pour le Diagnostic SEISAD, Chimie ParisTech, Université PSL, Paris, 75231, France
| | - Jolanda Spadavecchia
- CNRS, UMR 7244, CSPBAT, Laboratoire de Chimie, Structures et Propriétés de Biomatériaux et d’Agents Thérapeutiques, Université Sorbonne Paris Nord, Bobigny, 93000, France
| |
Collapse
|
20
|
Power AJ, Remediakis IN, Harmandaris V. Interface and Interphase in Polymer Nanocomposites with Bare and Core-Shell Gold Nanoparticles. Polymers (Basel) 2021; 13:541. [PMID: 33673125 PMCID: PMC7918087 DOI: 10.3390/polym13040541] [Citation(s) in RCA: 11] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/30/2020] [Revised: 02/07/2021] [Accepted: 02/08/2021] [Indexed: 11/16/2022] Open
Abstract
Metal nanoparticles are used to modify/enhance the properties of a polymer matrix for a broad range of applications in bio-nanotechnology. Here, we study the properties of polymer/gold nanoparticle (NP) nanocomposites through atomistic molecular dynamics, MD, simulations. We probe the structural, conformational and dynamical properties of polymer chains at the vicinity of a gold (Au) NP and a functionalized (core/shell) Au NP, and compare them against the behavior of bulk polyethylene (PE). The bare Au NPs were constructed via a systematic methodology starting from ab-initio calculations and an atomistic Wulff construction algorithm resulting in the crystal shape with the minimum surface energy. For the functionalized NPs the interactions between gold atoms and chemically adsorbed functional groups change their shape. As a model polymer matrix we consider polyethylene of different molecular lengths, from the oligomer to unentangled Rouse like systems. The PE/Au interaction is parametrized via DFT calculations. By computing the different properties the concept of the interface, and the interphase as well, in polymer nanocomposites with metal NPs are critically examined. Results concerning polymer density profiles, bond order parameter, segmental and terminal dynamics show clearly that the size of the interface/interphase, depends on the actual property under study. In addition, the anchored polymeric chains change the behavior/properties, and especially the chain density profile and the dynamics, of the polymer chain at the vicinity of the Au NP.
Collapse
Affiliation(s)
- Albert J. Power
- Department of Mathematics and Applied Mathematics, University of Crete, GR-71409 Heraklion, Crete, Greece
- Institute of Applied and Computational Mathematics (IACM), Foundation for Research and Technology Hellas (FORTH), GR-71110 Heraklion, Crete, Greece
| | - Ioannis N. Remediakis
- Department of Materials Science and Technology, University of Crete, GR-71003 Heraklion, Crete, Greece;
- Institute of Electronic Structure and Laser, (IESL), Foundation for Research and Technology Hellas (FORTH), GR-71110 Heraklion, Crete, Greece
| | - Vagelis Harmandaris
- Department of Mathematics and Applied Mathematics, University of Crete, GR-71409 Heraklion, Crete, Greece
- Institute of Applied and Computational Mathematics (IACM), Foundation for Research and Technology Hellas (FORTH), GR-71110 Heraklion, Crete, Greece
- Computation-Based Science and Technology Research Center, The Cyprus Institute, Nicosia 2121, Cyprus
| |
Collapse
|
21
|
Schwartzkopf M, Wöhnert SJ, Waclawek V, Carstens N, Rothkirch A, Rubeck J, Gensch M, Drewes J, Polonskyi O, Strunskus T, Hinz AM, Schaper SJ, Körstgens V, Müller-Buschbaum P, Faupel F, Roth SV. Real-time insight into nanostructure evolution during the rapid formation of ultra-thin gold layers on polymers. NANOSCALE HORIZONS 2021; 6:132-138. [PMID: 33290482 DOI: 10.1039/d0nh00538j] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/15/2023]
Abstract
Ultra-thin metal layers on polymer thin films attract tremendous research interest for advanced flexible optoelectronic applications, including organic photovoltaics, light emitting diodes and sensors. To realize the large-scale production of such metal-polymer hybrid materials, high rate sputter deposition is of particular interest. Here, we witness the birth of a metal-polymer hybrid material by quantifying in situ with unprecedented time-resolution of 0.5 ms the temporal evolution of interfacial morphology during the rapid formation of ultra-thin gold layers on thin polystyrene films. We monitor average non-equilibrium cluster geometries, transient interface morphologies and the effective near-surface gold diffusion. At 1 s sputter deposition, the polymer matrix has already been enriched with 1% gold and an intermixing layer has formed with a depth of over 3.5 nm. Furthermore, we experimentally observe unexpected changes in aspect ratios of ultra-small gold clusters growing in the vicinity of polymer chains. For the first time, this approach enables four-dimensional insights at atomic scales during the gold growth under non-equilibrium conditions.
Collapse
Affiliation(s)
- Matthias Schwartzkopf
- Photon Science, Deutsches Elektronen-Synchrotron (DESY), Notkestr. 85, D-22607 Hamburg, Germany.
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
Collapse
|
22
|
Yang M, Sun LP, Chen B, Liao J, Yuan H, Guan BO. A universal strategy: Rational construction of noble metal nanoparticle-shell/conducting polymer nanofiber-core electrodes with enhanced electrochemical performances. NANOTECHNOLOGY 2020; 31:445602. [PMID: 32693391 DOI: 10.1088/1361-6528/aba7e3] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
To address a challenge for decoration of noble metal nanoparticles (NMNPs)-shell on conducting polymer nanofiber (CPNF) electrodes (i.e. NMNP-shell/CPNF-core electrodes) for boosting electrochemical performances, a two-step strategy comprising chemical pre-deposition and electrochemical deposition is designed. The strategy shows a high universality in terms of the diversity of NMNP-shell elements (single-element: AgNP-shell, AuNP-shell, PtNP-shell, PdNP-shell; multi-element: Au/Pt/PdNP-shell) and the independence of conductive substrates of electrodes. The shells are composed of high-density NMNPs and have strong adhesion to CPNF-cores. It is demonstrated that in response to a specific applied electrical stimulus, the resulting low doping level of CPNFs facilitates the generation of high-density nucleation sites (small NMNPs) by chemical pre-deposition (as high capability of electron transfer and low resistance to electron transfer from CP chains to NM ions), which is indispensable for the formation of NMNP-shells on CPNF-cores by electrochemical deposition. The decoration of NMNP-shells can significantly enhance the electrochemical performances of CPNF electrodes. Moreover, the great practicality and reliability of NMNP-shell/CPNF-core electrodes in use as an electrocatalytic platform are confirmed. This universal strategy opens up a new avenue to construct high-dimension shell/core-nanostructured electrodes.
Collapse
Affiliation(s)
- Mingjin Yang
- Guangdong Provincial Key Laboratory of Optical Fiber Sensing and Communication, Institute of Photonics Technology, Jinan University, Guangzhou 511443, People's Republic of China
| | | | | | | | | | | |
Collapse
|
23
|
Nayek S, Aguilar R, Juel LA, Verbeck GF. Metallic nanoparticle production and exposure/deposition system for toxicological research applications using zebrafish. THE REVIEW OF SCIENTIFIC INSTRUMENTS 2020; 91:094101. [PMID: 33003788 DOI: 10.1063/5.0013428] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/12/2020] [Accepted: 08/13/2020] [Indexed: 06/11/2023]
Abstract
Metallic nanoparticles (NPs) have been accepted for various applications ranging from cosmetics to medicine. However, no method has been established in the scientific community that is capable of analyzing various metals, sizes, and levels of exposures without the concern of background chemical contaminations. We present here a system utilizing soft-landing ion mobility (SLIM) exposures of laser ablated metallic clusters capable of operating pressures of reduced vacuum (1 Torr) up to ambient (760 Torr) in the presence of a buffer gas. Clusters experience kinetic energies of less than 1 eV upon exiting the SLIM, allowing for the exposure of NPs to take place in a passive manner. While there is no mass-selection of cluster sizes in this work, it does show for the first time the creation and soft-landing of nanoclusters at ambient pressures. Factors such as area coverage and percentage distribution were studied, as well as the different effects that varying surfaces may cause in the agglomeration of the clusters. Furthermore, the system was successfully used to study the effects of silver nanoparticle exposure and determine the specific organs the NPs accumulate in using zebrafish (Danio rerio) as a model organism. This method provides a novel way to synthesize NPs and expose biological organisms for various toxicological analysis.
Collapse
Affiliation(s)
- Subhayu Nayek
- Department of Biological Sciences, University of North Texas, Denton, Texas 76201, USA
| | - Roberto Aguilar
- Department of Chemistry, University of North Texas, Denton, Texas 76201, USA
| | - Lauren A Juel
- Department of Chemistry, University of North Texas, Denton, Texas 76201, USA
| | - Guido F Verbeck
- Department of Biological Sciences, University of North Texas, Denton, Texas 76201, USA
| |
Collapse
|
24
|
Jiménez-Pérez R, Almagro L, González-Sánchez MI, Pedreño MÁ, Valero E. Non-enzymatic screen-printed sensor based on PtNPs@polyazure A for the real-time tracking of the H2O2 secreted from living plant cells. Bioelectrochemistry 2020; 134:107526. [DOI: 10.1016/j.bioelechem.2020.107526] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/08/2020] [Revised: 03/30/2020] [Accepted: 04/01/2020] [Indexed: 10/24/2022]
|
25
|
Bismuth as Smart Material and Its Application in the Ninth Principle of Sustainable Chemistry. J CHEM-NY 2020. [DOI: 10.1155/2020/9802934] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/02/2023] Open
Abstract
This paper reports an overview of Green Chemistry and the concept of its twelve principles. This study focusses on the ninth principle of Green Chemistry, that is, catalysis. A report on catalysis, in line with its definition, background, classification, properties, and applications, is provided. The study also entails a green element called bismuth. Bismuth’s low toxicity and low cost have made researchers focus on its wide applications in catalysis. It exhibits smartness in all the catalytic activities with the highest catalytic performance among other metals.
Collapse
|
26
|
Electrochemical and Spectroscopic Properties of Green Synthesized Gold Nanoparticles Doped in Polyacrylonitrile Nanofibers. J CLUST SCI 2020. [DOI: 10.1007/s10876-020-01834-3] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/24/2022]
|
27
|
Chiang WH, Mariotti D, Sankaran RM, Eden JG, Ostrikov KK. Microplasmas for Advanced Materials and Devices. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2020; 32:e1905508. [PMID: 31854023 DOI: 10.1002/adma.201905508] [Citation(s) in RCA: 41] [Impact Index Per Article: 10.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/24/2019] [Revised: 09/28/2019] [Indexed: 05/23/2023]
Abstract
Microplasmas are low-temperature plasmas that feature microscale dimensions and a unique high-energy-density and a nonequilibrium reactive environment, which makes them promising for the fabrication of advanced nanomaterials and devices for diverse applications. Here, recent microplasma applications are examined, spanning from high-throughput, printing-technology-compatible synthesis of nanocrystalline particles of common materials types, to water purification and optoelectronic devices. Microplasmas combined with gaseous and/or liquid media at low temperatures and atmospheric pressure open new ways to form advanced functional materials and devices. Specific examples include gas-phase, substrate-free, plasma-liquid, and surface-supported synthesis of metallic, semiconducting, metal oxide, and carbon-based nanomaterials. Representative applications of microplasmas of particular importance to materials science and technology include light sources for multipurpose, efficient VUV/UV light sources for photochemical materials processing and spectroscopic materials analysis, surface disinfection, water purification, active electromagnetic devices based on artificial microplasma optical materials, and other devices and systems including the plasma transistor. The current limitations and future opportunities for microplasma applications in materials related fields are highlighted.
Collapse
Affiliation(s)
- Wei-Hung Chiang
- Department of Chemical Engineering, National Taiwan University of Science and Technology, Taipei, 10607, Taiwan
| | - Davide Mariotti
- Nanotechnology & Integrated Bio-Engineering Centre (NIBEC), Ulster University, Shore Road, Newtownabbey, BT37 0QB, UK
| | - R Mohan Sankaran
- Department of Chemical and Biomolecular Engineering, Case Western Reserve University, Cleveland, OH, 44106-7217, USA
| | - J Gary Eden
- Department of Electrical and Computer Engineering, University of Illinois, Urbana, IL, 61801, USA
| | - Kostya Ken Ostrikov
- School of Chemistry, Physics and Mechanical Engineering, Queensland University of Technology, Brisbane, QLD, 4000, Australia
| |
Collapse
|
28
|
Han S, Chand A, Araby S, Cai R, Chen S, Kang H, Cheng R, Meng Q. Thermally and electrically conductive multifunctional sensor based on epoxy/graphene composite. NANOTECHNOLOGY 2020; 31:075702. [PMID: 31639783 DOI: 10.1088/1361-6528/ab5042] [Citation(s) in RCA: 23] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/12/2023]
Abstract
Flexible electronics is expected to be one of the most active research areas in the next decade. In this study, a mechanically strong and flexible epoxy/GnP composite film was fabricated having a percolation threshold of electrical conductivity at 1.08 vol% GnPs and high thermal conductivity as 1.07 W m-1 K-1 at 10 vol% GnPs. The composite film shows high mechanical performance: Young's modulus and tensile strength were improved by 1344% and 66.7%, respectively, at 10 vol%. The film demonstrated high sensitivity to various mechanical loads: (i) it has gauge factors of 2 at strain range 0%-7% and 6 at range 7%-10%; (ii) it gives good electrical response with bending and twisting angles up to 180°; and (iii) it displays a good compressive load response up to 2 N where the absolute value of electrical resistance change increased by 71%. Furthermore, the film showed an excellent reliability up to 5.5 × 103 cycles with minor zero-point error. Above 20 °C, the film solely acts as a temperature sensor; upon cyclic temperature testing, the film demonstrated a stable resistive response in the range of 30-75 °C with a temperature sensitivity coefficient of 0.0063 °C-1. This flexible composite film has remarkable properties that enable it to be used as a full-fledged sensor for universal applications in aerospace, automotive and civil engineering.
Collapse
Affiliation(s)
- Sensen Han
- College of Aerospace Engineering, Shenyang Aerospace University, Shenyang 110136, People's Republic of China. Shenyang Aircraft Design Institute, Shenyang 110136, People's Republic of China
| | | | | | | | | | | | | | | |
Collapse
|
29
|
Au and Au-Based nanomaterials: Synthesis and recent progress in electrochemical sensor applications. Talanta 2020; 206:120210. [DOI: 10.1016/j.talanta.2019.120210] [Citation(s) in RCA: 124] [Impact Index Per Article: 31.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/18/2019] [Revised: 07/25/2019] [Accepted: 07/31/2019] [Indexed: 12/28/2022]
|
30
|
Sun D, Tang M, Zhang L, Falzon BG, Padmanaban DB, Mariotti D, Maguire P, Xu H, Chen M, Sun D. Microplasma assisted synthesis of gold nanoparticle/graphene oxide nanocomposites and their potential application in SERS sensing. NANOTECHNOLOGY 2019; 30:455603. [PMID: 31207585 DOI: 10.1088/1361-6528/ab2a23] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/09/2023]
Abstract
This is the first study on the deployment of direct current atmospheric pressure microplasma technique for the single step synthesis of gold nanoparticle/graphene oxide (AuNP/GO) nanocomposites. The nanocomposites were characterized using ultraviolet-visible spectroscopy (UV-vis), x-ray diffraction and x-ray photoelectron spectroscopy and their formation mechanisms have been discussed in detail. Our AuNP/GO nanocomposites are highly biocompatible and have demonstrated surface enhanced Raman scattering (SERS) properties as compared to pure AuNPs and pure GO. Their potential as SERS substrate has been further demonstrated using probe molecules (methylene blue) at different concentrations.
Collapse
Affiliation(s)
- Daye Sun
- Advanced Composites Research Group (ACRG), School of Mechanical and Aerospace Engineering, Queen's University, Belfast BT9 5AH, United Kingdom
| | - Miao Tang
- The Wellcome-Wolfson Institute of Experimental Medicine, School of Medicine, Dentistry and Biomedical Sciences, Queen's University Belfast BT9 7BL, United Kingdom
| | - Li Zhang
- Research Center for Nano-Biomaterials, Analytical & Testing Center, Sichuan University, Chengdu 610065, People's Republic of China
| | - Brian G Falzon
- Advanced Composites Research Group (ACRG), School of Mechanical and Aerospace Engineering, Queen's University, Belfast BT9 5AH, United Kingdom
| | - Dilli Babu Padmanaban
- Nanotechnology and Integrated Bioengineering Centre, Ulster University, Co Antrim BT37 OQB, United Kingdom
| | - Davide Mariotti
- Nanotechnology and Integrated Bioengineering Centre, Ulster University, Co Antrim BT37 OQB, United Kingdom
| | - Paul Maguire
- Nanotechnology and Integrated Bioengineering Centre, Ulster University, Co Antrim BT37 OQB, United Kingdom
| | - Heping Xu
- The Wellcome-Wolfson Institute of Experimental Medicine, School of Medicine, Dentistry and Biomedical Sciences, Queen's University Belfast BT9 7BL, United Kingdom
| | - Mei Chen
- The Wellcome-Wolfson Institute of Experimental Medicine, School of Medicine, Dentistry and Biomedical Sciences, Queen's University Belfast BT9 7BL, United Kingdom
| | - Dan Sun
- Advanced Composites Research Group (ACRG), School of Mechanical and Aerospace Engineering, Queen's University, Belfast BT9 5AH, United Kingdom
| |
Collapse
|
31
|
Yu F, Liu M, Ma C, Di L, Dai B, Zhang L. A Review on the Promising Plasma-Assisted Preparation of Electrocatalysts. NANOMATERIALS 2019; 9:nano9101436. [PMID: 31658708 PMCID: PMC6835459 DOI: 10.3390/nano9101436] [Citation(s) in RCA: 22] [Impact Index Per Article: 4.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/29/2019] [Revised: 09/27/2019] [Accepted: 10/03/2019] [Indexed: 01/14/2023]
Abstract
Electrocatalysts are becoming increasingly important for both energy conversion and environmental catalysis. Plasma technology can realize surface etching and heteroatom doping, and generate highly dispersed components and redox species to increase the exposure of the active edge sites so as to improve the surface utilization and catalytic activity. This review summarizes the recent plasma-assisted preparation methods of noble metal catalysts, non-noble metal catalysts, non-metal catalysts, and other electrochemical catalysts, with emphasis on the characteristics of plasma-assisted methods. The influence of the morphology, structure, defect, dopant, and other factors on the catalytic performance of electrocatalysts is discussed.
Collapse
Affiliation(s)
- Feng Yu
- School of Chemistry and Chemical Engineering, Shihezi University, Shihezi 832003, China.
| | - Mincong Liu
- School of Chemistry and Chemical Engineering, Shihezi University, Shihezi 832003, China.
| | - Cunhua Ma
- School of Chemistry and Chemical Engineering, Shihezi University, Shihezi 832003, China.
| | - Lanbo Di
- College of Physical Science and Technology, Dalian University, Dalian 116622, China.
| | - Bin Dai
- School of Chemistry and Chemical Engineering, Shihezi University, Shihezi 832003, China.
| | - Lili Zhang
- Institute of Chemical and Engineering Sciences, Agency for Science, Technology and Research, Jurong Island 627833, Singapore.
| |
Collapse
|
32
|
Al-Jumaili A, Kumar A, Bazaka K, Jacob MV. Electrically Insulating Plasma Polymer/ZnO Composite Films. MATERIALS (BASEL, SWITZERLAND) 2019; 12:E3099. [PMID: 31547551 PMCID: PMC6804142 DOI: 10.3390/ma12193099] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 07/22/2019] [Revised: 09/02/2019] [Accepted: 09/13/2019] [Indexed: 12/15/2022]
Abstract
In this report, the electrical properties of plasma polymer films functionalized with ZnO nanoparticles were investigated with respect to their potential applications in biomaterials and microelectronics fields. The nanocomposite films were produced using a single-step method that combines simultaneous plasma polymerization of renewable geranium essential oil with thermal decomposition of zinc acetylacetonate Zn(acac)2. The input power used for the deposition of composites were 10 W and 50 W, and the resulting composite structures were abbreviated as Zn/Ge 10 W and Zn/Ge 50 W, respectively. The electrical properties of pristine polymers and Zn/polymer composite films were studied in metal-insulator-metal structures. At a quantity of ZnO of around ~1%, it was found that ZnO had a small influence on the capacitance and dielectric constants of thus-fabricated films. The dielectric constant of films with smaller-sized nanoparticles exhibited the highest value, whereas, with the increase in ZnO particle size, the dielectric constant decreases. The conductivity of the composites was calculated to be in the in the range of 10-14-10-15 Ω-1 m-1, significantly greater than that for the pristine polymer, the latter estimated to be in the range of 10-16-10-17 Ω-1 m-1.
Collapse
Affiliation(s)
- Ahmed Al-Jumaili
- Electronics Materials Lab, College of Science and Engineering, James Cook University, Townsville, QLD 4811, Australia.
- Physics Department, College of Science, Anbar University, Ramadi 31001, Iraq.
| | - Avishek Kumar
- Electronics Materials Lab, College of Science and Engineering, James Cook University, Townsville, QLD 4811, Australia.
| | - Kateryna Bazaka
- Electronics Materials Lab, College of Science and Engineering, James Cook University, Townsville, QLD 4811, Australia.
- School of Chemistry, Physics, Mechanical Engineering, Queensland University of Technology, Brisbane, QLD 4000, Australia.
- Research School of Electrical, Energy and Materials Engineering, The Australian National University, Canberra, ACT 2601, Australia.
| | - Mohan V Jacob
- Electronics Materials Lab, College of Science and Engineering, James Cook University, Townsville, QLD 4811, Australia.
| |
Collapse
|
33
|
Shifrina ZB, Matveeva VG, Bronstein LM. Role of Polymer Structures in Catalysis by Transition Metal and Metal Oxide Nanoparticle Composites. Chem Rev 2019; 120:1350-1396. [DOI: 10.1021/acs.chemrev.9b00137] [Citation(s) in RCA: 105] [Impact Index Per Article: 21.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/05/2023]
Affiliation(s)
- Zinaida B. Shifrina
- A.N. Nesmeyanov Institute of Organoelement Compounds, Russian Academy of Sciences, 28 Vavilov St, Moscow, 119991 Russia
| | - Valentina G. Matveeva
- Tver State Technical University, Department of Biotechnology and Chemistry, 22 A. Nikitina St, 170026 Tver, Russia
| | - Lyudmila M. Bronstein
- A.N. Nesmeyanov Institute of Organoelement Compounds, Russian Academy of Sciences, 28 Vavilov St, Moscow, 119991 Russia
- Indiana University, Department of Chemistry, Bloomington, 800 East Kirkwood Avenue, Indiana 47405, United States
- King Abdulaziz University, Faculty of Science, Department of Physics, P.O. Box 80303, Jeddah 21589, Saudi Arabia
| |
Collapse
|
34
|
Eco-friendly nanocomposites derived from geranium oil and zinc oxide in one step approach. Sci Rep 2019; 9:5973. [PMID: 30979934 PMCID: PMC6461640 DOI: 10.1038/s41598-019-42211-z] [Citation(s) in RCA: 26] [Impact Index Per Article: 5.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/24/2018] [Accepted: 03/21/2019] [Indexed: 11/08/2022] Open
Abstract
Nanocomposites offer attractive and cost-effective thin layers with superior properties for antimicrobial, drug delivery and microelectronic applications. This work reports single-step plasma-enabled synthesis of polymer/zinc nanocomposite thin films via co-deposition of renewable geranium essential oil-derived polymer and zinc nanoparticles produced by thermal decomposition of zinc acetylacetonate. The chemical composition, surfaces characteristics and antimicrobial performance of the designed nanocomposite were systematically investigated. XPS survey proved the presence of ZnO in the matrix of formed polymers at 10 W and 50 W. SEM images verified that the average size of a ZnO nanoparticle slightly increased with an increase in the power of deposition, from approximately 60 nm at 10 W to approximately 80 nm at 50 W. Confocal scanning laser microscopy images showed that viability of S. aureus and E.coli cells significantly reduced on surfaces of ZnO/polymer composites compared to pristine polymers. SEM observations further demonstrated that bacterial cells incubated on Zn/Ge 10 W and Zn/Ge 50 W had deteriorated cell walls, compared to pristine polymers and glass control. The release of ZnO nanoparticles from the composite thin films was confirmed using ICP measurements, and can be further controlled by coating the film with a thin polymeric layer. These eco-friendly nanocomposite films could be employed as encapsulation coatings to protect relevant surfaces of medical devices from microbial adhesion and colonization.
Collapse
|
35
|
Cyganowski P, Lesniewicz A, Dzimitrowicz A, Wolska J, Pohl P, Jermakowicz-Bartkowiak D. Molecular reactors for synthesis of polymeric nanocomposites with noble metal nanoparticles for catalytic decomposition of 4-nitrophenol. J Colloid Interface Sci 2019; 541:226-233. [PMID: 30690266 DOI: 10.1016/j.jcis.2019.01.097] [Citation(s) in RCA: 17] [Impact Index Per Article: 3.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/23/2018] [Revised: 01/21/2019] [Accepted: 01/22/2019] [Indexed: 11/29/2022]
Abstract
HYPOTHESIS A new, facile in-situ method for synthesis of polymeric nanocomposites (NCs) with nanoparticles (NPs) of Au, Pt and Pd is proposed. The method involves reduction-coupled sorption of Au(III), Pt(VI), and Pd(II), which avoids diffusion limitations, allowing the precipitation and stabilization of the NPs directly in the polymeric matrix. EXPERIMENTS The obtained nanomaterials were characterized by transmission electron microscopy (TEM), and Fourier-transformation infrared spectroscopy (FT-IR). NPs loaded into polymers were also investigated using X-ray diffraction (XRD). FINDINGS Based on the results, it was concluded that the amino functionalities simultaneously reduced noble metals ions and capped the NPs. The average diameter of the obtained AuNPs ranged from 25 to 109 nm, while reduction-coupled sorption was carried out in 1 and 3 mol L-1 HCl solutions, respectively. Applying a 0.1 mol L-1 HCl solution containing Au(III), Pd(II) and Pt(VI), a NC with AuNPs and cubic-like PdNPs was fabricated, while using a solution of the same composition, but in 3 mol L-1 HCl, resulted in formation of a NC with flower-like PtNPs. Ultimately, the selected NC based on a resin with functionalities derived from 1-(2-aminoethyl)piperazine and with bi-metallic active sites, i.e. AuNPs and PdNPs, revealed catalytic activity in the reduction of 4-nitrophenol.
Collapse
Affiliation(s)
- Piotr Cyganowski
- Wroclaw University of Science and Technology, Faculty of Chemistry, Department of Polymer and Carbonaceous Materials, Wybrzeze St. Wyspianskiego 27, 50-370 Wroclaw, Poland.
| | - Anna Lesniewicz
- Wroclaw University of Science and Technology, Faculty of Chemistry, Department of Analytical Chemistry and Chemical Metallurgy, Wybrzeze St. Wyspianskiego 27, 50-370 Wroclaw, Poland
| | - Anna Dzimitrowicz
- Wroclaw University of Science and Technology, Faculty of Chemistry, Department of Analytical Chemistry and Chemical Metallurgy, Wybrzeze St. Wyspianskiego 27, 50-370 Wroclaw, Poland
| | - Joanna Wolska
- Wroclaw University of Science and Technology, Faculty of Chemistry, Department of Polymer and Carbonaceous Materials, Wybrzeze St. Wyspianskiego 27, 50-370 Wroclaw, Poland
| | - Pawel Pohl
- Wroclaw University of Science and Technology, Faculty of Chemistry, Department of Analytical Chemistry and Chemical Metallurgy, Wybrzeze St. Wyspianskiego 27, 50-370 Wroclaw, Poland
| | - Dorota Jermakowicz-Bartkowiak
- Wroclaw University of Science and Technology, Faculty of Chemistry, Department of Polymer and Carbonaceous Materials, Wybrzeze St. Wyspianskiego 27, 50-370 Wroclaw, Poland
| |
Collapse
|
36
|
Kiziltan D, Vural T, Bayram C, Ozturk S, Bozdogan B, Yaman YT, Abaci S, Denkbas EB. Development of Titania Nanotube-based Electrochemical Immunosensor and Determination of Prostate Specific Antigen. ANAL SCI 2018; 34:789-794. [PMID: 29998960 DOI: 10.2116/analsci.17p407] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
Abstract
Early diagnosis of cancer is the most important factor that increases the success of treatment. Therefore, the development of new diagnostic tools is a necessity. In this study, a new electrode surface was developed via modification of a disposable titanium electrode with anodic oxidation and coating of gold nanoparticle and chitosan. Titanium electrodes were anodized by several anodization parameters to obtain a nanoporous surface and characterized by scanning electron microscopy. Electrodes anodized in optimum conditions were modified with gold nanoparticles and chitosan for enhancing conductivity and functionalizing the surface of electrode, respectively. To detect prostate specific antigen (PSA), anti-PSA was bound onto the functional electrode surface. Modified electrodes were characterized with scanning electron microscopy and cyclic voltammetry and used for chronoamperometric detection of PSA. Limit of detection (LOD) of the designed electrode was found to be 7.8 ng mL-1 for PSA in a linear range of 0 - 100 ng mL-1.
Collapse
Affiliation(s)
| | - Tayfun Vural
- Chemistry Department, Biochemistry Division, Hacettepe University
| | - Cem Bayram
- Advanced Technologies Application and Research Center, HUNITEK, Hacettepe University
| | - Serhat Ozturk
- Chemistry Department, Biochemistry Division, Hacettepe University
| | - Betul Bozdogan
- Nanotechnology and Nanomedicine Division, Hacettepe University
| | - Yesim Tugce Yaman
- Chemistry Department, Analytical Chemistry Division, Hacettepe University
| | - Serdar Abaci
- Chemistry Department, Analytical Chemistry Division, Hacettepe University
| | - Emir Baki Denkbas
- Bioengineering Division, Hacettepe University.,Chemistry Department, Biochemistry Division, Hacettepe University
| |
Collapse
|
37
|
Polymerization-Driven Immobilization of dc-APGD Synthesized Gold Nanoparticles into a Quaternary Ammonium-Based Hydrogel Resulting in a Polymeric Nanocomposite with Heat-Transfer Applications. Polymers (Basel) 2018; 10:polym10040377. [PMID: 30966412 PMCID: PMC6415246 DOI: 10.3390/polym10040377] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/27/2018] [Revised: 03/23/2018] [Accepted: 03/27/2018] [Indexed: 11/26/2022] Open
Abstract
A new method for the production of nanocomposites, composed of gold nanoparticles (AuNPs) and (vinylbenzyl)trimethylammonium chloride-co-N,N-methylene bisacrylamide (VBTAC-co-MBA) hydrogel, is described. Raw-AuNPs of defined optical and granulometric properties were synthesized using direct current atmospheric pressure glow discharge (dc-APGD) generated in contact with a solution of HAuCl4. Different approaches to the polymerization-driven synthesis of Au/VBTAC-co-MBA nanocomposites were tested. It was established that homogenous dispersion of AuNPs in this new nanomaterial with was achieved in the presence of NaOH in the reaction mixture. The new nanocomposite was found to have excellent heat-transfer properties.
Collapse
|