Recent Advances in Bonding Regulation of Metalloporphyrin-Modified Carbon-Based Catalysts for Accelerating Energy Electrocatalytic Applications

Metalloporphyrins modified carbon-based materials, owing to the excellent acid-base resistance, optimal electron transfer rates, and superior catalytic performance, have shown great potential in energy electrocatalysis. Recently, numerous efforts have concentrated on employing carbon-based substrates as platforms to anchor metalloporphyrins, thereby fabricating a diverse array of composite catalysts tailored for assorted electrocatalytic processes. However, the interplay through bonding regulation of metalloporphyrins with carbon materials and the resultant enhancement in catalyst performance remains inadequately elucidated. Gaining an in-depth comprehension of the synergistic interactions between metalloporphyrins and carbon-based materials within the realm of electrocatalysis is imperative for advancing the development of innovative composite catalysts. Herein, the review systematically classifies the binding modes (i.e., covalent grafting and non-covalent interactions) between carbon-based materials and metalloporphyrins, followed by a discussion on the structural characteristics and applications of metalloporphyrins supported on various carbon-based substrates, categorized according to their binding modes. Additionally, this review underscores the principal challenges and emerging opportunities for carbon-supported metalloporphyrin composite catalysts, offering both inspiration and methodological insights for researchers involved in the design and application of these advanced catalytic systems.

Revolutionizing carbon chemistry: Solar-powered C(sp3)-N bond activation and CO2 transformation via newly designed SBE-Y cutting-edge dynamic photocatalyst

A solvent-free sulfur-bridge-eosin-Y (SBE-Y) polymeric framework photocatalyst was prepared for the first time through an in situ thermal polymerization route using elemental sulfur (S8) as a bridge. The addition of a sulfur bridge to the polymeric framework structure resulted in an allowance of the harvesting range of eosin-Y (E-Y) for solar light. This shows that a wider range of solar light can be used by the bridge material's photocatalytic reactions. In this context, supercharged solar spectrum: enhancing light absorption and hole oxidation with sulfur bridges. This suggests that the excited electrons and holes through solar light can contribute to oxidation-reduction reactions more potently. As a result, the photocatalyst-enzyme attached artificial photosynthesis system developed using SBE-Y as a photocatalyst performs exceptionally well, resulting in high 1,4-NADH regeneration (86.81%), followed by its utilization in the exclusive production of formic acid (210.01 μmol) from CO2 and synthesis of fine chemicals with 99.9% conversion yields. The creation of more effective photocatalytic materials for environmental clean-up and other applications that depend on the solar light-driven absorption spectrum of inorganic and organic molecules could be one of the practical ramifications of this research.

Unsymmetrically β-Functionalized π-Extended Porphyrins: Synthesis, Spectral, Electrochemical Redox Properties, and Their Utilization as Efficient Two-Photon Absorbers

Two new series of unsymmetrically β-functionalized porphyrins, MTPP(NO₂)MA (1M), (MA = methyl acrylate) and MTPP(NO₂)MB (2M) (MB = mono-benzo) (where M = 2H, Co(II), Ni(II), Cu(II) and Zn(II)), were synthesized and characterized by various spectroscopic techniques. The saddle shape conformation of ZnTPP(NO₂)MAPy and ZnTPP(NO₂)MB was confirmed by single-crystal X-ray analysis. Density functional theory (DFT) calculation revealed that NiTPP(NO₂)MB has a severe nonplanar geometry possessing a high magnitude of ΔC_β = ±0.727 Å and Δ24 = ±0.422 Å values among all other porphyrins. Synthesized β-substituted porphyrins exhibited red-shifted B- and Q-bands corresponding to their parent molecule due to the electron-withdrawing peripheral substituents. Notable redshift (Δλ_max = 50-60 nm) in electronic spectral features and with weak-intensity emission spectral features were observed for the free-base porphyrins and Zn(II) complexes compared to H₂TPP and ZnTPP, respectively. The first-ring reduction potential of MTPP(NO₂)MA (1M) exhibited 0.21-0.5 V anodic shift, whereas 0.18-0.23 V anodic shift was observed in the first-ring oxidation potential compared to the corresponding MTPPs due to the presence of electron-withdrawing β-substituents at the periphery of the macrocycle. Interestingly, NiTPP(NO₂)MA (1Ni) has shown an additional Ni^II/Ni^III oxidation potential observed at 2.05 V along with two ring-centered oxidations. The first-ring reduction and oxidation potentials of MTPP(NO₂)MB (2M) have shown 0.39-0.46 and 0.19-0.27 V anodic shifts with respect to their corresponding MTPPs. The nonlinear optical (NLO) properties of all of the porphyrins were investigated, and the extracted nonlinear optical parameters revealed intense reverse-saturable absorption (RSA) behavior and the self-focusing behavior with positive nonlinear refractive index in the range of (0.19-1.75) × 10^-17 m²/W. Zn(II) complexes exhibited the highest two-photon absorption coefficient (β) and cross section (σ_TPA) of ∼95 × 10^-12 m/W and 19.66 × 10⁴ GM, respectively, among all of the metal complexes.

Self-Assembled Materials Incorporating Functional Porphyrins and Carbon Nanoplatforms as Building Blocks for Photovoltaic Energy Applications

As a primary goal, this review highlights the role of supramolecular interactions in the assembly of new sustainable materials incorporating functional porphyrins and carbon nanoplatforms as building blocks for photovoltaics advancements.

Synthesis of porphyrin-incorporating covalent organic frameworks for sonodynamic therapy

Porphyrin-incorporating covalent organic frameworks were synthesized at room temperature. The resulting products with uniform morphology and excellent crystallinity exhibited good singlet oxygen generation ability. Both in vitro and in vivo experiments demonstrated the significant antitumor efficiency via sonodynamic therapy.

A Deformable Low-Threshold Optical Limiter with Oligothiophene-Doped Liquid Crystals

Optical limiting is a phenomenon widely recognized as the potential application for a protector of human eyes and optical sensors from irradiation with lasers. However, a high optical limiting threshold and low flexibility have restricted such applications. Here, we report that oligothiophene-doped liquid crystals (LCs) function as a low-threshold optical limiter with deformability. Irradiation of dye-doped LCs with a continuous wave (CW) laser beam brings about the formation of diffraction rings, and the number of rings changes depending on the incident light intensity due to their photoinduced molecular reorientation. Utilizing such reorientation enables reversible optical limiting without additional multilayered optical components. In particular, an electric field application to a LC-based optical limiter decreases their optical limiting threshold from 2100 to 25 mW/cm², and the threshold can be tuned by adjusting the applied voltage. Furthermore, the softness of LCs allows for the fabrication of the deformable optical limiter; optical limiting due to the molecular reorientation occurs even in largely bent states. The low-threshold and deformable optical limiter based on oligothiophene-doped LCs thus will enable one to develop the protector of eyes and optical sensors from glaring light-induced damage.

Mesoporous Porphyrin-Silica Nanocomposite as Solid Acid Catalyst for High Yield Synthesis of HMF in Water

Solid acid catalysts occupy a special class in heterogeneous catalysis for their efficiency in eco-friendly conversion of biomass into demanding chemicals. We synthesized porphyrin containing porous organic polymers (PorPOPs) using colloidal silica as a support. Post-modification with chlorosulfonic acid enabled sulfonic acid functionalization, and the resulting material (PorPOPS) showed excellent activity and durability for the conversion of fructose to 5-hydroxymethyl furfural (HMF) in green solvent water. PorPOPS composite was characterized by N2 sorption, FTIR, TGA, CHNS, FESEM, TEM and XPS techniques, justifying the successful synthesis of organic networks and the grafting of sulfonic acid sites (5 wt%). Furthermore, a high surface area (260 m2/g) and the presence of distinct mesopores of ~15 nm were distinctly different from the porphyrin containing sulfonated porous organic polymer (FePOP-1S). Surprisingly the hybrid PorPOPS showed an excellent yield of HMF (85%) and high selectivity (>90%) in water as compared to microporous pristine-FePOP-1S (yield of HMF = 35%). This research demonstrates the requirement of organic modification on silica surfaces to tailor the activity and selectivity of the catalysts. We foresee that this research may inspire further applications of biomass conversion in water in future environmental research.

MoS2 quantum dots chemically modified with porphyrin for solid-state broadband optical limiters

MoS₂ quantum dots (MQDs) with unique electronic and optical properties are promising broadband nonlinear optical (NLO) materials for ultrafast optical applications. It would be very interesting and challenging to functionalize MQDs with another hotspot optoelectronically active molecule "porphyrin". Herein, by treating MQDs with tetraphenylporphyrin (TPP) diazonium salts, we synthesized a novel nanohybrid material, MQD-TPP, in which TPP was covalently functionalized to the surface of MQDs via a C-S linkage. To explore its solid-state broadband NLO application, the MQD-TPP nanohybrid was encapsulated into a poly(methyl methacrylate) (PMMA) matrix for the open-aperture Z-scan measurements at 532 and 1064 nm. In contrast to MQDs/PMMA and TPP/PMMA, the MQD-TPP/PMMA film exhibited superior nonlinear optical and optical limiting responses with the largest nonlinear coefficients (β_eff) and the lowest optical limiting (OL) thresholds of about 1059.17 cm GW^-1 and 1.62 J cm^-2 at 532 nm and 831.13 cm GW^-1 and 1.97 J cm^-2 at 1064 nm, respectively.

Bidirectional charge-transfer behavior in carbon-based hybrid nanomaterials

In recent years there has been a growing interest in finding materials revealing bidirectional charge-transfer characteristics, that is, materials behaving as an electron donor or an acceptor in the presence of redox and photoactive addends, for optoelectronic applications. In this respect, carbon-based nanostructures, such as graphene and carbon nanotubes, have emerged as promising nanomaterials for the development of hybrid systems for bidirectional charge transfer, whose behaviour can be switched from donor-type to acceptor-type by simply changing the electroactive counterpart to which they are anchored. In this review we provide an overview of the main advances that have been made over the past few years in carbon-based hybrid architectures involving different types of carbon nanostructures and photosensitizers. In particular, carbon nanotube and graphene-based hybrid systems will be highlighted.

Reductive diazotation of carbon nanotubes: an experimental and theoretical selectivity study

The reaction of negatively charged SWCNTs with diazonium salts was analyzed in a combined experimental and computational DFT study.

The reaction of neutral single-walled carbon nanotubes (SWCNTs) with diazonium salts proceeds with a high selectivity towards metallic carbon nanotube species; this reaction is well-understood and the mechanism has been elucidated. In the present joint theoretical and experimental study, we investigate the reaction of negatively charged SWCNTs – carbon nanotubides – with diazonium salts. Our density functional theory calculations predict a stronger binding of the aryl diazonium cations to charged metallic SWCNTs species and therefore lead to a preferential addend binding in the course of the reaction. The Raman resonance profile analysis on the reductive arylation of carbon nanotubides obtained by the solid state intercalation approach with potassium in varying concentrations confirms the predicted preferred functionalization of metallic carbon nanotubes. Furthermore, we were also able to show that the selectivity for metallic SWCNT species could be further increased when low potassium concentrations (K : C < 1 : 200) are used for an initial selective charging of the metallic species. Further insights into the nature of the bound addends were obtained by coupled thermogravimetric analysis of the functionalized samples.

Exploring the novel donor-nanotube archetype as an efficient third-order nonlinear optical material: asymmetric open-shell carbon nanotubes

Contrary to the enormous number of previous studies on carbon nanotubes (CNTs), herein, we realized the origin of the intrinsic open-shell diradical character and second hyperpolarizability γ using a broken symmetry approach. This study was inspired by our recent findings (S. Muhammad, et al., Nanoscale, 2016, 8, 17998 and Nakano, et al., J. Phys. Chem. C, 2016, 120, 1193). We performed structural modifications through a unique asymmetric donor-nanotube framework, which led to a novel paradigm of modified CNTs with tunable open-shell diradical character and remarkably superior NLO response properties. Interestingly, asymmetry and diradical character were found to be the crucial factors to modulate the second hyperpolarizability γ. We initially performed a comparative analysis of the diradical characters and γ amplitudes of boron nitride nanotubes (BNNTs) and CNTs possessing significant ionic characters and covalent characters, respectively. The basic findings for these simple configurations were further extended to the donor-acceptor CNT paradigm, which finally led to excellent asymmetric donor-CNT configurations with remarkably larger γ amplitudes. Furthermore, among the CNTs, finite length zigzag CNT(6,0)3 were modified with different donor-acceptor configurations. Interestingly, for the first time, unique donor-nanotube configurations [1,4-(NH2)2CNT-(6,0)3 and 1,4-(NH2)2CNT-(6,0)5] were found; they showed significantly robust γ amplitudes as large as 2519 × 103 and 4090 × 103 a.u. at the LC-UBLYP(μ = 0.33)/6-31G* level of theory. Additionally, several molecular level insights have been obtained for these novel donor-nanotube configurations using their odd electron densities, molecular electrostatic maps, densities of states and γ density analyses to highlight the realization of these novel materials for highly efficient optical and NLO applications.

Cancer cell targeting, controlled drug release and intracellular fate of biomimetic membrane-encapsulated drug-loaded nano-graphene oxide nanohybrids

Nano-graphene oxide (NGO) has been proposed as a novel drug carrier. However, the poor biocompatibility and physiological stability as well as lack of cancer targeting capability have limited its further applications in cancer therapy. To solve this problem, we developed a novel nanohybrid of NGO/DOX@SPC-FA by first allowing soy phosphatidylcholine membrane (SPC) to encapsulate DOX-loaded NGO (NGO/DOX) and then modifying the SPC membrane with PEGylated lipid-FA conjugate to achieve the display of cancer targeting FA on the nanohybrid surface. The SPC membrane (mimicking cell membrane) enabled the resultant nanohybrids (NGO/DOX@SPC-FA) to exhibit good stability and biocompatibility, high drug loading capability, efficient cellular uptake, and controlled drug release. Moreover, compared with NGO/DOX and SPC-modified NGO/DOX (NGO/DOX@SPC), the FA-modified NGO/DOX@SPC nanohybrids (NGO/DOX@SPC-FA) could deliver NGO/DOX to cancer cells with improved delivery and killing efficacy due to the presence of FA targeting motifs on the surface. The NGO/DOX@SPC-FA nanohybrids were found to be internalized specifically by FA-positive cancer cells (Hela cells) through both macropinocytosis-directed engulfment and clathrin-dependent endocytosis, and then become localized into the lysosomes. In vivo biodistribution study showed that NGO/DOX@SPC-FA had a high tumor targeting ability because of the active targeting mechanism with folate modification. In vivo antitumor therapy study demonstrated NGO/DOX@SPC-FA could significantly inhibit tumour growth and prolong the survival time of mice. Our results suggest that NGO/DOX@SPC-FA, as a novel drug delivery system with high drug loading and targeted delivery efficiency, holds promise for future cancer therapy.

Graphene and Carbon-Nanotube Nanohybrids Covalently Functionalized by Porphyrins and Phthalocyanines for Optoelectronic Properties

In recent years, there has been a rapid growth in studies of the optoelectronic properties of graphene, carbon nanotubes (CNTs), and their derivatives. The chemical functionalization of graphene and CNTs is a key requirement for the development of this field, but it remains a significant challenge. The focus here is on recent advances in constructing nanohybrids of graphene or CNTs covalently linked to porphyrins or phthalocyanines, as well as their application in nonlinear optics. Following a summary of the syntheses of nanohybrids constructed from graphene or CNTs and porphyrins or phthalocyanines, explicit intraconjugate electronic interactions between photoexcited porphyrins/phthalocyanines and graphene/CNTs are introduced classified by energy transfer, electron transfer, and charge transfer, and their optoelectronic applications are also highlighted. The major current challenges for the development of covalently linked nanohybrids of porphyrins or phthalocyanines and carbon nanostructures are also presented.

One-pot synthesis of manganese porphyrin covalently functionalized graphene oxide for enhanced photocatalytic hydrogen evolution

In this paper, graphene oxide (GO) sheets covalently functionalized with (5,10,15,20-tetraphenyl) porphinato manganese(III) (MnTPP) has been successfully synthesized and tested as a photocatalyst for hydrogen evolution from water under UV-vis light irradiation. The obtained sample was systematically characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-vis, Fourier transform infrared (FTIR), and Raman spectroscopy. The results show that the MnTPP moiety has been successfully grafted on the graphene oxide surface to form MnTPP modified GO (GO-MnTPP). The fluorescence quenching and photocurrent enhancement of GO-MnTPP confirm that the rapid electrons transfer from photoexcited the MnTPP moiety to the GO sheets. The platinized GO-MnTPP exhibits enhanced photocatalytic activity for water reduction to produce hydrogen. Moreover, with the assistance of polyvinyl pyrrolidone (PVP), the photocatalytic activity is further improved because of aggregation prevention of the GO-MnTPP nanocomposite. This study provides a facile method to build porphyrin-graphene-based photocatalysts for solar energy conversion.

Novel Bi2O2CO3/polypyrrole/g-C3N4 nanocomposites with efficient photocatalytic and nonlinear optical properties

A series of novel Bi₂O₂CO₃/polypyrrole/g-C₃N₄ nanocomposites loaded with different contents of g-C₃N₄ was demonstrated for recyclable photocatalysis and nonlinear optical applications.

Nonlinear Optical Materials for the Smart Filtering of Optical Radiation

The control of luminous radiation has extremely important implications for modern and future technologies as well as in medicine. In this Review, we detail chemical structures and their relevant photophysical features for various groups of materials, including organic dyes such as metalloporphyrins and metallophthalocyanines (and derivatives), other common organic materials, mixed metal complexes and clusters, fullerenes, dendrimeric nanocomposites, polymeric materials (organic and/or inorganic), inorganic semiconductors, and other nanoscopic materials, utilized or potentially useful for the realization of devices able to filter in a smart way an external radiation. The concept of smart is referred to the characteristic of those materials that are capable to filter the radiation in a dynamic way without the need of an ancillary system for the activation of the required transmission change. In particular, this Review gives emphasis to the nonlinear optical properties of photoactive materials for the function of optical power limiting. All known mechanisms of optical limiting have been analyzed and discussed for the different types of materials.

Unravelling the mechanisms of reactive oxygen species formation in nanohybrid systems of porphyrins and enriched (6,5) single-walled carbon nanotubes for photosensitization

Two different porphyrins inside the exciton volume of a carbon nanotube with charged N either in or out.

Surface Modification Chemistries of Materials Used in Diagnostic Platforms with Biomolecules

Biomolecules including DNA, protein, and enzymes are of prime importance in biomedical field. There are several reports on the technologies for the detection of these biomolecules on various diagnostic platforms. It is important to note that the performance of the biosensor is highly dependent on the substrate material used and its meticulous modification for particular applications. Therefore, it is critical to understand the principles of a biosensor to identify the correct substrate material and its surface modification chemistry. The imperative surface modification for the attachment of biomolecules without losing their bioactivity is a key to sensitive detection. Therefore, finding of a modification method which gives minimum damage to the surface as well as biomolecule is highly inevitable. Different surface modification technologies are invented according to the type of a substrate used. Surface modification techniques of the materials used as platforms in the fabrication of biosensors are reviewed in this paper.

Porphyrin–poly(arylene ether sulfone) covalently functionalized multi-walled carbon nanotubes: synthesis and enhanced broadband nonlinear optical properties

A porphyrin polymer functionalized MWNT hybrid was synthesized with enhanced NLO performance due to the synergistic effect of different mechanism and photo-induced ET/PET process.

TiO2–multi-walled carbon nanotube nanocomposites: hydrothermal synthesis and temporally-dependent optical properties

MWCNTs/TiO2 nanocomposites have been prepared by a hydrothermal method and characterized by various spectroscopic techniques, and an enhanced optical nonlinearity was observed for M1.00 due to a combination of mechanisms.

One-pot exfoliation of graphite and synthesis of nanographene/dimesitylporphyrin hybrids

A simple one-pot process to exfoliate graphite and synthesize nanographene-dimesitylporphyrin hybrids has been developed. Despite the bulky mesityl groups, which are expected to hinder the efficient π–π stacking between the porphyrin core and graphene, the liquid-phase exfoliation of graphite is significantly favored by the presence of the porphyrins. Metallation of the porphyrin further enhances this effect. The resulting graphene/porphyrin hybrids were characterized by spectroscopy (UV-visible, fluorescence, and Raman) and microscopy (STEM, scanning transmission electron microscopy).

Tetrazine chromophore-based metal-organic frameworks with unusual configurations: synthetic, structural, theoretical, fluorescent, and nonlinear optical studies

Three unusual three-dimensional (3D) tetrazine chromophore-based metal-organic frameworks (MOFs) {(Et4 N)[WS4 Cu3 (CN)2 (4,4'-pytz)0.5 ]}n (1), {[MoS4 Cu4 (CN)2 (4,4'-pytz)2 ]⋅CH2 Cl2 }n (2), and {[WS4 Cu3 (4,4'-pytz)3 ]⋅[N(CN)2 ]}n (3; 4,4'-pytz=3,6-bis(4-pyridyl)tetrazine) have been synthesized and characterized by using FTIR and UV/Vis spectroscopy, elemental analysis, powder X-ray diffraction, gel permeation chromatography, steady-state fluorescence, and thermogravimetric analysis; their identities were confirmed by single-crystal X-ray diffraction studies. MOF 1 possesses the first five-connected M/S/Cu (M=Mo, W) framework with an unusual 3D (4(4) ⋅6(6) ) topology constructed from T-shaped [WS4 Cu3 ](+) clusters as nodes and single CN(-) /4,4'-pytz bridges as linkers. MOF 2 features a novel 3D MOF structure with (4(20) ⋅6(8) ) topology, in which the bridging 4,4'-pytz ligands exhibit unique distorted arch structures. MOF 3 displays the first 3D MOF structure based on flywheel-shaped [WS4 Cu3 ](+) clusters with a non-interpenetrating honeycomb-like framework and a heavily distorted "ACS" topology. Steady-state fluorescence studies of 1-3 reveal significant fluorescence emissions. The nonlinear optical (NLO) properties of 1-3 were investigated by using a Z-scan technique with 5 ns pulses at λ=532 nm. The Z-scan experimental results show that the π-delocalizable tetrazine-based 4,4'-pytz ligands contribute to the strong third-order NLO properties exhibited by 1-3. Time-dependent density functional theory studies afforded insight into the electronic transitions and spectral characterization of these functionalized NLO molecular materials.

Core-shell nanostructures of covalently grafted polyaniline multi-walled carbon nanotube hybrids for improved optical limiting

Polyaniline multi-walled carbon nanotube (MWCNT) hybrids are synthesized by the in situ polymerization of aniline in the presence of phenylenediamine-functionalized MWCNTs. Along with the aniline monomer, the aniline moiety on the surface of phenylenediamine-functionalized MWCNTs also participates in the polymerization and acts as a covalent bridge between the polyaniline and the MWCNT. The photoluminescence quenching in the hybrid, due to the electron transfer between the polyaniline and the MWCNT, and the resulting improvement in optical limiting are also discussed. The large nonlinear absorption coefficient with the low-limiting threshold of the hybrids compared to polyaniline is attributed to the combined nonlinear optical (NLO) mechanisms and the photo-induced electron transfer interactions.

Covalent functionalization of graphene with polythiophene through a Suzuki coupling reaction

A promising graphene-based material covalently modified with polythiophene by a C–C bond was synthesized by a Suzuki coupling reaction and characterized by various techniques.

Hyaluronic acid-decorated graphene oxide nanohybrids as nanocarriers for targeted and pH-responsive anticancer drug delivery

A novel nanohybrid of hyaluronic acid (HA)-decorated graphene oxide (GO) was fabricated as a targeted and pH-responsive drug delivery system for controlling the release of anticancer drug doxorubicin (DOX) for tumor therapy. For the preparation, DOX was first loaded onto GO nanocarriers via π-π stacking and hydrogen-bonding interactions, and then it was decorated with HA to produce HA-GO-DOX nanohybrids via H-bonding interactions. In this strategy, HA served as both a targeting moiety and a hydrophilic group, making the as-prepared nanohybrids targeting, stable, and disperse. A high loading efficiency (42.9%) of DOX on the nanohybrids was also obtained. Cumulative DOX release from HA-GO-DOX was faster in pH 5.3 phosphate-buffered saline solution than that in pH 7.4, providing the basis for pH-response DOX release in the slightly acidic environment of tumor cells, while the much-slower DOX release from HA-GO-DOX than DOX showed the sustained drug-release capability of the nanohybrids. Fluorescent images of cellular uptake and cell viability analysis studies illustrated that these HA-GO-DOX nanohybrids significantly enhanced DOX accumulation in HA-targeted HepG2 cancer cells compared to HA-nontargeted RBMEC cells and subsequently induced selective cytotoxicity to HepG2 cells. In vivo antitumor efficiency of HA-GO-DOX nanohybrids showed obviously enhanced tumor inhibition rate for H22 hepatic cancer cell-bearing mice compared with free DOX and the GO-DOX formulation. These studies suggest that the HA-GO-DOX nanohybrids have potential clinical applications for anticancer drug delivery.

Emergent Properties and Toxicological Considerations for Nanohybrid Materials in Aquatic Systems

Conjugation of multiple nanomaterials has become the focus of recent materials development. This new material class is commonly known as nanohybrids or "horizon nanomaterials". Conjugation of metal/metal oxides with carbonaceous nanomaterials and overcoating or doping of one metal with another have been pursued to enhance material performance and/or incorporate multifunctionality into nano-enabled devices and processes. Nanohybrids are already at use in commercialized energy, electronics and medical products, which warrant immediate attention for their safety evaluation. These conjugated ensembles likely present a new set of physicochemical properties that are unique to their individual component attributes, hence increasing uncertainty in their risk evaluation. Established toxicological testing strategies and enumerated underlying mechanisms will thus need to be re-evaluated for the assessment of these horizon materials. This review will present a critical discussion on the altered physicochemical properties of nanohybrids and analyze the validity of existing nanotoxicology data against these unique properties. The article will also propose strategies to evaluate the conjugate materials' safety to help undertake future toxicological research on the nanohybrid material class.

Synthesis and optical properties of poly (aryl ether ketone)s-containing nonlinear optical chromophores

Novel functional poly (aryl ether ketone)s bonded nonlinear optical chromophores (meso-tetrakis (4-hydroxyphenyl) porphyrin, THPP) with different backbone structures were synthesized and characterized using proton nuclear magnetic resonance, Fourier transform infrared, and ultraviolet–visible absorption spectra. Their optical properties were evaluated by nonlinear optical analyses and optical limiting (OL). The results showed that these polymers possessed good OL properties and large nonlinear optical (NLO) susceptibilities. All polymer films-containing THPP presented excellent thermal stability (>460°C). Polymers bonded with –CH3 to the backbone exhibited better performances in OL and NLO properties than those bonded with –CF3; however, the thermal stability of the former was slightly inferior. Backbone bonded with electron donating groups was conducive to the OL and NLO properties.

Facile synthesis and enhanced nonlinear optical properties of porphyrin-functionalized multi-walled carbon nanotubes

Two multi-walled carbon nanotube (MWCNT)-based nanohybrids, MWCNT-ZnTPP and MWCNT-TPP (TPP=5-[4-{2-(4-formylphenoxy)- ethyloxy}phenyl]-10,15,20-triphenylporphyrin, ZnTPP=5-[4-{(4-formylphenyl)ethynyl}phenyl]-10,15,20-triphenylporphinatozinc(II)), were prepared directly from pristine MWCNTs through 1,3-dipolar cycloaddition reactions. Covalent attachment of the porphyrins to the surfaces of the MWCNTs was confirmed by Fourier transform infrared spectroscopy, ultraviolet/visible absorption, fluorescence, Raman, and X-ray photoelectron spectroscopy, elemental analysis, transmission electron microscopy, and thermogravimetric analysis. Attachment of the porphyrin moieties to the surface of the MWCNTs significantly improves the solubility and ease of processing of these MWCNT-porphyrin composite materials. Z-scan studies reveal that these MWCNT-porphyrin nanohybrids exhibit enhanced nonlinear optical properties under both nanosecond and picosecond laser pulses at λ=532 nm in comparison with free MWCNTs and the free porphyrin chromophores, whereas superior optical limiting performance was displayed by MWCNT-porphyrin composite materials rather than MWCNTs/ZnTPP and MWCNTs/TPP blends, which is consistent with a remarkable accumulation effect as a result of the covalent linkage between the porphyrin and the MWCNTs.

Graphene in light: design, synthesis and applications of photo-active graphene and graphene-like materials

Graphene functionalized with photo-active units has become one of the most exciting topics of research in the last few years, which remarkably sustains and expands the graphene boom. The rise of photo-active graphene in photonics and optoelectronics is evidenced by a spate of recent reports on topics ranging from photodetectors, photovoltaics, and optoelectronics to photocatalysis. For these applications, the fabrication of photo-active graphene through appropriate chemical functionalization strategies is essential as pristine graphene has zero bandgap and only weak absorption of photons. Written from the chemists' point of view, up-to-date chemical functionalization of graphene with various small organic molecules, conjugated polymers, rare-earth components, and inorganic semiconductors is reviewed. Particular attention is paid to the development of graphene functionalized with light-harvesting moieties, including materials synthesis, characterization, energy/charge-transfer processes, and applications in photovoltaics. Challenges currently faced by researchers and future perspectives in this field are also discussed.

Synthesis and characterization of glycyrrhizin-decorated graphene oxide for hepatocyte-targeted delivery

The present work was to investigate graphene oxide (GO) decorated with glycyrrhizin (GL) which were conjugated via strong hydrogen-bonding interaction as a new hepatocyte-targeted delivery vehicle. The hydrogen-bonding interaction, simplified as a non-covalent type of functionalization, enables high drug loading and subsequent controlled release of the drug. An effective loading of GL on GO as high as 5.19 mg/mg was obtained at initial GL concentration of 0.6 mg/mL. The release of GL on GO showed strong pH dependence and the extent of release at pH 5.5 and 7.4 is 58.4% and 17.6% over 30 h in vitro respectively. The results show that the GO-GL complex seems to be a very promising vehicle for loading of drugs under neutral conditions and releasing under acidic environment. Furthermore, GO-GL can be obtained under mild conditions without addition of any organic solvents and surfactants, which is very suitable for pharmaceutical applications as a promising hepatocyte-targeted delivery carrier.