Ultrasensitive Electrochemiluminescence Biosensor Based on Efficient Signal Amplification of Copper Nanoclusters Induced by CaMnO3 for CD44 Trace Detection

Metal nanoclusters (Me NCs) have become a research hotspot in the field of electrochemiluminescence (ECL) sensing analysis. This is primarily attributed to their excellent luminescent properties and biocompatibility along with their easy synthesis and labeling characteristics. At present, the application of Me NCs in ECL mainly focuses on precious metals, whose high cost, to some extent, limits their widespread application. In this work, Cu NCs with cathode ECL emissions in persulfate (S2O82-) were prepared as signal probes using glutathione as ligands, which exhibited stable luminescence signals and high ECL efficiency. At the same time, CaMnO3 was introduced as a co-reaction promoter to increase the ECL responses of Cu NCs, thereby further expanding their application potential in biochemical analysis. Specifically, the reversible conversion of Mn3+/Mn4+ greatly promoted the generation of sulfate radicals (SO4•-), providing a guarantee for improving the luminescence signals of Cu NCs. Furthermore, a short peptide (NARKFYKGC) was introduced to enable the fixation of antibodies to specific targets, preventing the occupancy of antigen-binding sites (Fab fragments). Therefore, the sensitivity of the biosensor could be significantly enhanced by releasing additional Fab fragments. Considering the approaches discussed above, the constructed biosensor could achieve sensitive detection of CD44 over a broad range (10 fg/mL-100 ng/mL), with an ultralow detection limit of 3.55 fg/mL (S/N = 3), which had valuable implications for the application of nonprecious Me NCs in biosensing analysis.

Dual-quenching electrochemiluminescence resonance energy transfer system from CoPd nanoparticles enhanced porous g-C3N4 to FeMOFs-sCuO for neuron-specific enolase immunosensing

For the diagnosis and therapy of small cell lung cancer (SCLC), the accurate and sensitive determination of neuron-specific enolase (NSE) content is crucial. This work outlines a dual-quenching electrochemiluminescence resonance energy transfer (ECL-RET) immunosensor based on the double quenching effects of iron base metal organic frameworks (FeMOFs) loaded with small sized CuO nanoparticles (FeMOFs-sCuO) towards CoPd nanoparticles (CoPdNPs) enhanced porous g-C₃N₄ (P-C₃N₄-CoPdNPs). To be specific, we prepared a porous g-C₃N₄ (P-C₃N₄) which has a rich porous structure, and significantly increased the specific surface area and the number of reaction sites of P-C₃N₄. Meanwhile, the CoPdNPs were loaded onto P-C₃N₄ to improve the ECL luminescence property of P-C₃N₄/K₂S₂O₈ system through acting as a coreaction accelerator. In addition, the ultraviolet-visible (UV-vis) absorption spectra of FeMOFs and small sized CuO nanoparticles (sCuO) showed considerable overlap with the ECL emission spectra of P-C₃N₄ appropriately. Therefore, FeMOFs with high specific surface area were prepared and well combined with sCuO to effectively dual-quenching the ECL emission of P-C₃N₄ based on resonance energy transfer. Hence, a new type ECL-RET couple made up of P-C₃N₄-CoPdNPs (donor) and FeMOFs-sCuO (acceptor) were developed for the first time. A certain amount of P-C₃N₄-CoPdNPs, Ab₁, BSA, NSE were modified layer by layer onto the electrode surface. Then FeMOFs-sCuO-Ab₂ bioconjugates was incubated through the immune recognition binding. As a result, a sandwich-type ECL biosensor was manufactured successfully for NSE immunoassay. Under optimal experimental conditions, the limit of detection (LOD) and the limit of quantitation (LOQ) of the prepared ECL sensor for NSE analysis was 20.4 fg mL^-1 and 7.99 fg mL^-1, respectively, with the relative standard deviation (RSD) of 1.68%. The linear detection range was 0.0000500-100 ng mL^-1. The studied immunosensor had satisfactory sensitivity, specificity and reproducibility, manifesting the suggested sensing strategy might offer a good technical means and theoretical basis for the sensitivity analysis of NSE and has a potential application in clinical diagnosis analysis.

Recent advances in the potential applications of luminescence-based, SPR-based, and carbon-based biosensors

Abstract

The need for biosensors has evolved in the detection of molecules, diseases, and pollution from various sources. This requirement has headed to the development of accurate and powerful equipment for analysis using biological sensing component as a biosensor. Biosensors have the advantage of rapid detection that can beat the conventional methods for the detection of the same molecules. Bio-chemiluminescence-based sensors are very sensitive during use in biological immune assay systems. Optical biosensors are emerging with time as they have the advantage that they act with a change in the refractive index. Carbon nanotube-based sensors are another area that has an important role in the biosensor field. Bioluminescence gives much higher quantum yields than classical chemiluminescence. Electro-generated bioluminescence has the advantage of miniature size and can produce a high signal-to-noise ratio and the controlled emission. Recent advances in biological techniques and instrumentation involving fluorescence tag to nanomaterials have increased the sensitivity limit of biosensors. Integrated approaches provided a better perspective for developing specific and sensitive biosensors with high regenerative potentials. This paper mainly focuses on sensors that are important for the detection of multiple molecules related to clinical and environmental applications.

Key points

• The review focusses on the applications of luminescence-based, surface plasmon resonance-based, carbon nanotube-based, and graphene-based biosensors

• Potential clinical, environmental, agricultural, and food industry applications/uses of biosensors have been critically reviewed

• The current limitations in this field are discussed, as well as the prospects for future advancement

Recent Progress in Electrochemical Immunosensors

Biosensors used for medical diagnosis work by analyzing physiological fluids. Antibodies have been frequently used as molecular recognition molecules for the specific binding of target analytes from complex biological solutions. Electrochemistry has been introduced for the measurement of quantitative signals from transducer-bound analytes for many reasons, including good sensitivity. Recently, numerous electrochemical immunosensors have been developed and various strategies have been proposed to detect biomarkers. In this paper, the recent progress in electrochemical immunosensors is reviewed. In particular, we focused on the immobilization methods using antibodies for voltammetric, amperometric, impedimetric, and electrochemiluminescent immunosensors.

Electrochemiluminescence analysis of tryptophan in aqueous solutions based on its reaction with tetraphenylborate anions

The emission of electrogenerated chemiluminescence (ECL) is observed upon the oxidation of fluorescent aromatic amino acid tryptophan in aqueous solutions at a glassy carbon electrode in the presence of a sodium tetraphenylborate co-reactant in a broad pH range. The emission is particularly strong when potential pulses are applied to the electrode. The ECL intensity is proportional to the concentration of amino acid and allows its determination in the concentration range of 0.3 μM-0.3 mM with high selectivity in the presence of other amino acids. The results of studies suggest that the indole ring of tryptophan is responsible for the observed ECL emission.

Simultaneous Electrochemical and Emission Monitoring of Electrogenerated Chemiluminescence through Instrument Hyphenation

One of the long-standing challenges to performing electrogenerated chemiluminescence (ECL) research is the need for dedicated instrumentation or highly customized cells to achieve reproducibility. This manuscript describes an approach to designing ECL systems through the hyphenation of existing laboratory instruments, which provide innate time correlation of electrochemical and emission data. This design methodology lowers the entry barrier required to obtaining reproducible ECL measurements and provides flexibility in the scope of applications. Uniquely, the simplicity of this system's experimental interface, a spectrochemical quartz cuvette, readily enables collaboration with finite element modeling that simulates ECL occurring in the cuvette-based cell. This combination of empirical and simulation data allowed for the investigation of the intertwined kinetics behind the coreactant ECL mechanism of tris(2,2'-bipyridine)ruthenium(II) (Ru(bpy)₃²⁺) and tripropylamine (TPA). The complexity of the system measurable via the hyphenation methodology was further scaled though the addition of tris[2-(4,6-difluorophenyl)pyridinato-C², N] iridium(III) (Ir(dFppy)₃) and the observation of real time multiplexing.

Electrogenerated chemiluminescence of black phosphorus nanosheets and its application in the detection of H2O2

Black phosphorus nanosheets (BPNS) were synthesized from BP crystals through liquid exfoliation coupled with ultrasonic methods under aqueous conditions.

Electrochemiluminescent biosensor with DNA link for selective detection of human IgG based on steric hindrance

A highly selective DNA-based electrochemiluminescence (ECL) based biosensor is described for the detection of human IgG. It is exploiting the effect of steric hindrance that affects the strength of the ECL signal in the presence of IgG. Digoxin-linked signaling DNA was specifically bound to IgG, and this causes steric hindrance which limits the ability of DNA to hybridize with capturing DNA attached to a gold electrode. Europium (II) doped CdSe quantum dots were covalently linked to the DNA in order to generate the ECL signal. Using this steric hindrance hybridization method, the ECL signal of the biosensor were proportional to the concentration of IgG with a wide linear range and a 14 pM detection limit. Conceivably, the method can be expanded to the detection of a wide range of proteins for which homologous recognition elements are available.

Effect of ion migration in electro-generated chemiluminescence depending on the luminophore types and operating conditions

The working mechanisms of gel-based electrogenerated chemiluminescence (ECL) devices were revealed using systematic experiments and simulations.

Electro-generated chemiluminescence (ECL) has attracted increasing attention as a new platform for light-emitting devices; in particular, the use of mechanically stretchable ECL gels opens up the opportunity to achieve deformable displays. The movements of radical ions under an external electric field include short-range diffusion near the electrodes and long-distance migration between the electrodes. So far, only the diffusion of radical ions has been considered as the operating principle behind ECL. In this study, electrochemical and optical analysis was performed systematically to investigate the role of ion migration in ECL devices. This study reveals that long-distance migration of radical ions can be a key variable in ECL at low frequencies and that this effect depends on the type of ion species and the operating conditions (e.g. voltage and frequency). We also report that the emissions from the two electrodes are not identical, and the emission behaviors are different in the optimal operating conditions for the red, green, and blue ECL emissions.

Picomolar Detection of Hydrogen Peroxide using Enzyme-free Inorganic Nanoparticle-based Sensor

A philosophical shift has occurred in the field of biomedical sciences from treatment of late-stage disease symptoms to early detection and prevention. Ceria nanoparticles (CNPs) have been demonstrated to neutralize free radical chemical species associated with many life-threatening disease states such as cancers and neurodegenerative diseases by undergoing redox changes (Ce3+  ↔ Ce4+). Herein, we investigate the electrochemical response of multi-valent CNPs in presence of hydrogen peroxide and demonstrate an enzyme-free CNP-based biosensor capable of ultra-low (limit of quantitation: 0.1 pM) detection. Several preparations of CNPs with varying Ce3+:Ce4+ are produced and are analyzed by electrochemical methods. We find that an increasing magnitude of response in cyclic voltammetry and chronoamperometry correlates with increasing Ce4+ relative to Ce3+ and utilize this finding in the design of the sensor platform. The sensor retains sensitivity across a range of pH's and temperatures, wherein enzyme-based sensors will not function, and in blood serum: reflecting selectivity and robustness as a potential implantable biomedical device.

Highly efficient electrochemiluminescence labels comprising iridium(iii) complexes

Highly efficient iridium ECL labels exhibiting various emission colors have been developed. Importantly, BSA labeled with the novel iridium labels displays much more intense ECL than the same amount labeled by a traditional ruthenium label in ProCell buffer solution.

Highly efficient electrochemiluminescence based on 4-amino-1,2,4-triazole Schiff base two-dimensional Zn/Cd coordination polymers

ComplexesHL1andHL2and1–4exhibit a stronger ECL emission and complexes1–4exhibit higher stability.

Considering the chemical energy requirements of the tri-n-propylamine co-reactant pathways for the judicious design of new electrogenerated chemiluminescence detection systems

The introduction of a 'co-reactant' was a critical step in the evolution of electrogenerated chemiluminescence (ECL) from a laboratory curiosity to a widely utilised detection system. In conjunction with a suitable electrochemiluminophore, the co-reactant enables generation of both the oxidised and reduced precursors to the emitting species at a single electrode potential, under the aqueous conditions required for most analytical applications. The most commonly used co-reactant is tri-n-propylamine (TPrA), which was developed for the classic tris(2,2'-bipyridine)ruthenium(II) ECL reagent. New electrochemiluminophores such as cyclometalated iridium(III) complexes are also evaluated with this co-reactant. However, attaining the excited states in these systems can require much greater energy than that of tris(2,2'-bipyridine)ruthenium(II), which has implications for the co-reactant reaction pathways. In this tutorial review, we describe a simple graphical approach to characterise the energetically feasible ECL pathways with TPrA, as a useful tool for the development of new ECL detection systems.

Electrochemiluminescence on digital microfluidics for microRNA analysis

Electrochemiluminescence (ECL) is a sensitive analytical technique with great promise for biological applications, especially when combined with microfluidics. Here, we report the first integration of ECL with digital microfluidics (DMF). ECL detectors were fabricated into the ITO-coated top plates of DMF devices, allowing for the generation of light from electrically excited luminophores in sample droplets. The new system was characterized by making electrochemical and ECL measurements of soluble mixtures of tris(phenanthroline)ruthenium(II) and tripropylamine (TPA) solutions. The system was then validated by application to an oligonucleotide hybridization assay, using magnetic particles bearing 21-mer, deoxyribose analogues of the complement to microRNA-143 (miRNA-143). The system detects single nucleotide mismatches with high specificity, and has a limit of detection of 1.5 femtomoles. The system is capable of detecting miRNA-143 in cancer cell lysates, allowing for the discrimination between the MCF-7 (less aggressive) and MDA-MB-231 (more aggressive) cell lines. We propose that DMF-ECL represents a valuable new tool in the microfluidics toolbox for a wide variety of applications.

Anodic Electrogenerated Chemiluminescence of Ru(bpy)3(2+) with CdSe Quantum Dots as Coreactant and Its Application in Quantitative Detection of DNA

In the present paper, we report that CdSe quantum dots (QDs) can act as the coreactant of Ru(bpy)₃²⁺ electrogenerated chemiluminescence (ECL) in neutral condition. Strong anodic ECL signal was observed at ~1.10 V at CdSe QDs modified glassy carbon electrode (CdSe/GCE), which might be mainly attributed to the apparent electrocatalytic effect of QDs on the oxidation of Ru(bpy)₃²⁺. Ru(bpy)₃²⁺ can be intercalated into the loop of hairpin DNA through the electrostatic interaction to fabricate a probe. When the probe was bound to the CdSe QDs modified on the GCE, the intense ECL signal was obtained. The more Ru(bpy)₃²⁺ can be intercalated when DNA loop has larger diameter and the stronger ECL signal can be observed. The loop of hairpin DNA can be opened in the presence of target DNA to release the immobilized Ru(bpy)₃²⁺, which can result in the decrease of ECL signal. The decreased ECL signal varied linearly with the concentration of target DNA, which showed the ECL biosensor can be used in the sensitive detection of DNA. The proposed ECL biosensor showed an excellent performance with high specificity, wide linear range and low detection limit.

Direct electrochemiluminescence of gold nanoparticles bifunctionalized by luminol analogue–metal complexes in neutral and alkaline media

Strong direct electrochemiluminescence of gold nanoparticles bifunctionalized by luminol analogue–metal complexes was observed in neutral and alkaline media without a coreactant.

Ratiometric ECL of heterodinuclear Os–Ru dual-emission labels

The first ratiometric ECL of heterodinuclear Os–Ru dual-emission labels.

Ruthenium polypyridine complexes combined with oligonucleotides for bioanalysis: a review

Ruthenium complexes are among the most interesting coordination complexes and they have attracted great attention over the past decades due to their appealing biological, catalytic, electronic and optical properties. Ruthenium complexes have found a unique niche in bioanalysis, as demonstrated by the substantial progress made in the field. In this review, the applications of ruthenium complexes coordinated with polypyridine ligands (and analogues) in bioanalysis are discussed. Three main detection methods based on electrochemistry, electrochemiluminescence, and photoluminscence are covered. The important targets, including DNA and other biologically important targets, are detected by specific biorecognition with the corresponding oligonucleotides as the biorecognition elements (i.e., DNA is probed by its complementary strand and other targets are detected by functional nucleic acids, respectively). Selected examples are provided and thoroughly discussed to highlight the substantial progress made so far. Finally, a brief summary with perspectives is included.

Quantification assays for total and polyglutamine-expanded huntingtin proteins

The expansion of a CAG trinucleotide repeat in the huntingtin gene, which produces huntingtin protein with an expanded polyglutamine tract, is the cause of Huntington's disease (HD). Recent studies have reported that RNAi suppression of polyglutamine-expanded huntingtin (mutant HTT) in HD animal models can ameliorate disease phenotypes. A key requirement for such preclinical studies, as well as eventual clinical trials, aimed to reduce mutant HTT exposure is a robust method to measure HTT protein levels in select tissues. We have developed several sensitive and selective assays that measure either total human HTT or polyglutamine-expanded human HTT proteins on the electrochemiluminescence Meso Scale Discovery detection platform with an increased dynamic range over other methods. In addition, we have developed an assay to detect endogenous mouse and rat HTT proteins in pre-clinical models of HD to monitor effects on the wild type protein of both allele selective and non-selective interventions. We demonstrate the application of these assays to measure HTT protein in several HD in vitro cellular and in vivo animal model systems as well as in HD patient biosamples. Furthermore, we used purified recombinant HTT proteins as standards to quantitate the absolute amount of HTT protein in such biosamples.

Remarkable increase in luminol electrochemiluminescence by sequential electroreduction and electrooxidation

Luminol electrochemiluminescence is dramatically increased by about five hundred times by coupling electrochemical reduction and electrochemical oxidation using simple linear sweep voltammetry, enabling sensitive detection.

An ionogel composite including copolymer nanowires for disposable electrochemiluminescent sensor configurations

Aniline derivatives such as luminol and benzidines can be electropolymerized for the preparation of electrochemiluminescent sensors.

Electrogenerated chemiluminescence detector based on Ru(bpy)3(2+) immobilized in cation exchange resin for high-performance liquid chromatography: An approach to stable detection

In this work, an electrogenerated chemiluminescence (ECL) detector with improved stability was developed for high-performance liquid chromatography (HPLC) detection of hydrochlorothiazide (HCTZ). The detector was prepared by packing cation exchanged resin particles in a glass tube, followed by inserting Pt wires (working electrode) in this tube and sealing. The leakage of Ru(bpy)3(2+) from the resin was compensated by adding a small amount of Ru(bpy)3(2+) in the mobile phase. Factors affected the performance of the proposed ECL detector were investigated. Under the optimal conditions, the ECL intensity has a linear relationship with the concentration of HCTZ in the range of 5.0 × 10(-8) g mL(-1)-2.5 × 10(-5) g mL(-1) and the detection limit was 2.0 × 10(-8) g mL(-1) (S/N=3). Application of the detector to the analysis of HCTZ in human serum proved feasible.

Determination of captopril by high-performance liquid chromatography with direct electrogenerated chemiluminescence

Captopril exhibit electrogenerated chemiluminescence (ECL) in NaNO(3) solution when constant current is exerted. Based on this observation, a direct ECL method coupled with high-performance liquid chromatography (HPLC) separation is developed for determination of captopril in human serum. Factors affected the ECL emission are investigated. Under the optimal conditions, the ECL intensity has a linear relationship with the concentration of captopril in the range of 4.0×10(-6)-2.0×10(-3) g mL(-1) and the detection limit is 2×10(-6) g mL(-1) (S/N=3). Compared with the common electrogenerated chemiluminescence experiments, the developed method need no any other fluorescence additives.