Actively moving polymers

4D Multimaterial Printing of Soft Actuators with Spatial and Temporal Control

Soft actuators (SAs) are devices which can interact with delicate objects in a manner not achievable with traditional robotics. While it is possible to design a SA whose actuation is triggered via an external stimulus, the use of a single stimulus creates challenges in the spatial and temporal control of the actuation. Herein, a 4D printed multimaterial soft actuator design (MMSA) whose actuation is only initiated by a combination of triggers (i.e., pH and temperature) is presented. Using 3D printing, a multilayered soft actuator with a hydrophilic pH-sensitive layer, and a hydrophobic magnetic and temperature-responsive shape-memory polymer layer, is designed. The hydrogel responds to environmental pH conditions by swelling or shrinking, while the shape-memory polymer can resist the shape deformation of the hydrogel until triggered by temperature or light. The combination of these stimuli-responsive layers allows for a high level of spatiotemporal control of the actuation. The utility of the 4D MMSA is demonstrated via a series of cargo capture and release experiments, validating its ability to demonstrate active spatiotemporal control. The MMSA concept provides a promising research direction to develop multifunctional soft devices with potential applications in biomedical engineering and environmental engineering.

Modeling of a light-fueled self-paddling boat with a liquid crystal elastomer-based motor

Active materials possess unique properties of being able to respond autonomously to external stimuli, yet realizing and regulating the motion behavior of active machines remains a major challenge. Conventional control approaches, including sensor control and external device control, are both complex and difficult to implement. In contrast, active materials-based self-oscillators offer distinct properties such as periodic motion and ease of regulation. Inspired by paddle boats, we have proposed a conceptual light-fueled self-paddling boat with a photothermally responsive liquid crystal elastomer (LCE)-based motor that operates under steady illumination and incorporates an LCE fiber. Based on the well-established dynamic LCE model and rotation dynamics, the dynamic equations for governing the self-paddling of the LCE-steered boat are derived, and the driving torque of the LCE-based motor and the paddling velocity of the LCE-steered boat are formulated successively. The numerical results show that two motion modes of the boat under steady illumination: the static mode and the self-paddling mode. The self-paddling regime arises from the competition between the light-fueled driving torque and the frictional torque. Moreover, the critical conditions required to trigger the self-paddling are quantitatively examined as well as the significant system parameters affecting the driving torque, angular velocity, and paddling velocity. The proposed conceptual light-fueled self-paddling LCE-steered boat exhibits benefits including customizable size and being untethered and ambient powered, which provides valuable insights into the design and application of micromachines, soft robotics, energy harvesters, and beyond.

Active Materials for Functional Origami

In recent decades, origami has been explored to aid in the design of engineering structures. These structures span multiple scales and have been demonstrated to be used toward various areas such as aerospace, metamaterial, biomedical, robotics, and architectural applications. Conventionally, origami or deployable structures have been actuated by hands, motors, or pneumatic actuators, which can result in heavy or bulky structures. On the other hand, active materials, which reconfigure in response to external stimulus, eliminate the need for external mechanical loads and bulky actuation systems. Thus, in recent years, active materials incorporated with deployable structures have shown promise for remote actuation of light weight, programmable origami. In this review, active materials such as shape memory polymers (SMPs) and alloys (SMAs), hydrogels, liquid crystal elastomers (LCEs), magnetic soft materials (MSMs), and covalent adaptable network (CAN) polymers, their actuation mechanisms, as well as how they have been utilized for active origami and where these structures are applicable is discussed. Additionally, the state-of-the-art fabrication methods to construct active origami are highlighted. The existing structural modeling strategies for origami, the constitutive models used to describe active materials, and the largest challenges and future directions for active origami research are summarized.

Shape Memory Respirator Mask for Airborne Viruses

The emergence of COVID-19 has spurred demand for facemasks and prompted many studies aiming to develop masks that provide maximum protection. Filtration capacity and fit define the level of protection a mask can provide, and the fit is in large part determined by face shape and size. Due to differences in face dimensions and shapes, a mask of one size will not be likely to fit all faces. In this work, we examined shape memory polymers (SMPs) for producing facemasks that are able to alter their shape and size to fit every face. Polymer blends with and without additives or compatibilizers were melt-extruded, and their morphology, melting and crystallization behavior, mechanical properties, and shape memory (SM) behavior were characterized. All the blends had phase-separated morphology. The mechanical properties of the SMPs were modified by altering the content of polymers and compatibilizers or additives in the blends. The reversible and fixing phases are determined by the melting transitions. SM behavior is caused by physical interaction at the interface between the two phases in the blend and the crystallization of the reversible phase. The optimal SM blend and printing material for the mask was determined to be a polylactic acid (PLA)/polycaprolactone (PCL) blend with 30% PCL. A 3D-printed respirator mask was manufactured and fitted to several faces after being thermally activated at 65°C. The mask had excellent SM and could be molded and remolded to fit a variety of facial shapes and sizes. The mask also exhibited self-healing and healed from surface scratches.

Phenazine-Based Oligomers as Redox-Responsive Molecular Actuators

Nanosized butterfly-coil foldamers containing alternating phenazine-1,6-dicarboxamide and 2,5-dialkoxyterephthalamide moieties have been demonstrated to undergo extension-contraction in response to changing their oxidation state. Both the chemical (catalytic hydrogenation/aerial oxidation) and electrochemical versions of this process have been shown to be clean and fully reversible.

Advances in the development of biodegradable coronary stents: A translational perspective

Implantation of cardiovascular stents is an important therapeutic method to treat coronary artery diseases. Bare-metal and drug-eluting stents show promising clinical outcomes, however, their permanent presence may create complications. In recent years, numerous preclinical and clinical trials have evaluated the properties of bioresorbable stents, including polymer and magnesium-based stents. Three-dimensional (3D) printed-shape-memory polymeric materials enable the self-deployment of stents and provide a novel approach for individualized treatment. Novel bioresorbable metallic stents such as iron- and zinc-based stents have also been investigated and refined. However, the development of novel bioresorbable stents accompanied by clinical translation remains time-consuming and challenging. This review comprehensively summarizes the development of bioresorbable stents based on their preclinical/clinical trials and highlights translational research as well as novel technologies for stents (e.g., bioresorbable electronic stents integrated with biosensors). These findings are expected to inspire the design of novel stents and optimization approaches to improve the efficacy of treatments for cardiovascular diseases.

•

Bioresorbable stents can overcome the limitations of non-degradable stents.

•

3D printing of shape-memory polymeric stents can lead to better clinical outcomes.

•

Advances in Mg-, Fe- and Zn-based stents from a translational perspective.

•

Electronic stents integrated with biosensors can covey stent status in real time.

•

Development in the assessment of stent performance in vivo.

Review of Thermoresponsive Electroactive and Magnetoactive Shape Memory Polymer Nanocomposites

Electroactive and magnetoactive shape memory polymer nanocomposites (SMCs) are multistimuli-responsive smart materials that are of great interest in many research and industrial fields. In addition to thermoresponsive shape memory polymers, SMCs include nanofillers with suitable electric and/or magnetic properties that allow for alternative and remote methods of shape memory activation. This review discusses the state of the art on these electro- and magnetoactive SMCs and summarizes recently published investigations, together with relevant applications in several fields. Special attention is paid to the shape memory characteristics (shape fixity and shape recovery or recovery force) of these materials, as well as to the magnitude of the electric and magnetic fields required to trigger the shape memory characteristics.

Programmable Shape Change in Semicrystalline Liquid Crystal Elastomers

Liquid crystal elastomers (LCEs) are stimuli-responsive materials capable of reversible and programmable shape change in response to an environmental stimulus. Despite the highly responsive nature of these materials, the modest elastic modulus and blocking stress exhibited by these actuating materials can be limiting in some engineering applications. Here, we engineer a semicrystalline LCE, where the incorporation of semicrystallinity in a lightly cross-linked liquid crystalline network yields tough and highly responsive materials. Directed self-assembly can be employed to program director profiles through the thickness of the semicrystalline LCE. In short, we use the alignment of a liquid crystal monomer phase to pattern the anisotropy of a semicrystalline polymer network. Both the semicrystalline-liquid crystalline and liquid crystalline-isotropic phase transition temperatures provide controllable shape transformations. A planarly aligned sample's normalized dimension parallel to the nematic director decreases from 1 at room temperature to 0.42 at 250 °C. The introduction of the semicrystalline nature also enhances the mechanical properties exhibited by the semicrystalline LCE. Semicrystalline LCEs have a storage modulus of 390 MPa at room temperature, and monodomain samples are capable of generating a contractile stress of 2.7 MPa on heating from 25 to 50 °C, far below the nematic to isotropic transition temperature. The robust mechanical properties of this material combined with the high actuation strain can be leveraged for applications such as soft robotics and actuators capable of doing significant work.

The Technological Advancement to Engineer Next-Generation Stent-Grafts: Design, Material, and Fabrication Techniques

Endovascular treatment of aortic disorders has gained wide acceptance due to reduced physiological burden to the patient compared to open surgery, and ongoing stent-graft evolution has made aortic repair an option for patients with more complex anatomies. To date, commercial stent-grafts are typically developed from established production techniques with simple design structures and limited material ranges. Despite the numerous updated versions of stent-grafts by manufacturers, the reoccurrence of device-related complications raises questions about whether the current manfacturing methods are technically able to eliminate these problems. The technology trend to produce efficient medical devices, including stent-grafts and all similar implants, should eventually change direction to advanced manufacturing techniques. It is expected that through recent advancements, especially the emergence of 4D-printing and smart materials, unprecedented features can be defined for cardiovascular medical implants, like shape change and remote battery-free self-monitoring. 4D-printing technology promises adaptive functionality, a highly desirable feature enabling printed cardiovascular implants to physically transform with time to perform a programmed task. This review provides a thorough assessment of the established technologies for existing stent-grafts and provides technical commentaries on known failure modes. They then discuss the future of advanced technologies and the efforts needed to produce next-generation endovascular implants.

Phase Separation of Aqueous Poly(diisopropylaminoethyl methacrylate) upon Heating

Poly(diisopropylaminoethyl methacrylate) (PDPA) is a pH- and thermally responsive water-soluble polymer. This study deepens the understanding of its phase separation behavior upon heating. Phase separation upon heating was investigated in salt solutions of varying pH and ionic strength. The effect of the counterion on the phase transition upon heating is clearly demonstrated for chloride-, phosphate-, and citrate-anions. Phase separation did not occur in pure water. The buffer solutions exhibited similar cloud points, but phase separation occurred in different pH ranges and with different mechanisms. The solution behavior of a block copolymer comprising poly(dimethylaminoethyl methacrylate) (PDMAEMA) and PDPA was investigated. Since the PDMAEMA and PDPA blocks phase separate within different pH- and temperature ranges, the block copolymer forms micelle-like structures at high temperature or pH.

A medicated shape memory composite of grafting tannin/poly(l-lactide)

Establishing drug release from shape memory polymers (SMPs) for biomedical applications will broaden the horizon of SMP applications from commercial medical device to scientific drug delivery system. Therefore, a strategy combining degradable SMP with drug release is put forward. However, there are few reports about the relevance between them so far. In the work, incorporations of three grafting tannins (TA) as switching phase into poly (l-lactide)(PLLA) construct different thermoresponsive SM composites. TA-PCL-COOH/PLLA exhibites good shape fixation (R_f) and recovery rate (R_r) at 55 °C, and its recovery time is 75 s. After loading lipophilic drug, SM capability of medicated TA-PCL-COOH/PLLA enhances, the R_f and R_r are 97.8% and 97.2%, in particular, its recovery time decreases to 32 s. The effect of SM on drug release is explored. After the first round of SM, the drug release accelerates obviously at body temperature; for example, the release amount of drug increases from 46.5% to 66.1% at initial 12 h due to change of microstructure and improvement of wettability. The drug release rate climbs only slightly as the SM round increases.

Shape Memory Materials from Rubbers

Smart materials are much discussed in the current research scenario. The shape memory effect is one of the most fascinating occurrences in smart materials, both in terms of the phenomenon and its applications. Many metal alloys and polymers exhibit the shape memory effect (SME). Shape memory properties of elastomers, such as rubbers, polyurethanes, and other elastomers, are discussed in depth in this paper. The theory, factors impacting, and key uses of SME elastomers are all covered in this article. SME has been observed in a variety of elastomers and composites. Shape fixity and recovery rate are normally analysed through thermomechanical cycle studies to understand the effectiveness of SMEs. Polymer properties such as chain length, and the inclusion of fillers, such as clays, nanoparticles, and second phase polymers, will have a direct influence on the shape memory effect. The article discusses these aspects in a simple and concise manner.

Shape Memory Polymer Foams with Tunable Degradation Profiles

Uncontrolled hemorrhage is the leading cause of preventable death on the battlefield and results in ∼1.5 million deaths each year. The primary current treatment options are gauze and/or tourniquets, which are ineffective for up to 80% of wounds. Additionally, most hemostatic materials must be removed from the patient within <12 h, which limits their applicability in remote scenarios and can cause additional bleeding upon removal. Here, degradable shape memory polymer (SMP) foams were synthesized to overcome these limitations. SMP foams were modified with oxidatively labile ether groups and hydrolytically labile ester groups to degrade after implantation. Foam physical, thermal, and shape memory properties were assessed along with cytocompatibility and blood interactions. Degradation profiles were obtained in vitro in oxidative and hydrolytic media (3% H2O2 (oxidation) and 0.1 M NaOH (hydrolysis) at 37 °C). The resulting foams had tunable, clinically relevant degradation rates, with complete mass loss within 30-60 days. These SMP foams have potential to provide an easy-to-use, shape-filling hemostatic dressing that can be left in place during traumatic wound healing with future potential use in regenerative medicine applications.

Smart scaffolds: shape memory polymers (SMPs) in tissue engineering

Smart scaffolds based on shape memory polymer (SMPs) have been increasingly studied in tissue engineering. The unique shape actuating ability of SMP scaffolds has been utilized to improve delivery and/or tissue defect filling. In this regard, these scaffolds may be self-deploying, self-expanding, or self-fitting. Smart scaffolds are generally thermoresponsive or hydroresponsive wherein shape recovery is driven by an increase in temperature or by hydration, respectively. Most smart scaffolds have been directed towards regenerating bone, cartilage, and cardiovascular tissues. A vast variety of smart scaffolds can be prepared with properties targeted for a specific tissue application. This breadth of smart scaffolds stems from the variety of compositions employed as well as the numerous methods used to fabricated scaffolds with the desired morphology. Smart scaffold compositions span across several distinct classes of SMPs, affording further tunability of properties using numerous approaches. Specifically, these SMPs include those based on physically cross-linked and chemically cross-linked networks and include widely studied shape memory polyurethanes (SMPUs). Various additives, ranging from nanoparticles to biologicals, have also been included to impart unique functionality to smart scaffolds. Thus, given their unique functionality and breadth of tunable properties, smart scaffolds have tremendous potential in tissue engineering.

Quantifying the Shape Memory Performance of a Three-Dimensional-Printed Biobased Polyester/Cellulose Composite Material

A biobased composite material with heat-triggered shape memory ability was successfully formulated for three-dimensional (3D) printing. It was produced from cellulose nanocrystals and cellulose micro-powder particles within a bioderived thermally cured polyester matrix based on glycerol, citric acid, and sebacic acid. The effect of curing duration on the material's shape memory behavior was quantified by using two thermo-mechanical approaches to measure recovery: (1) displacement in three-point bending and (2) angular recovery from a beam bent at 90° in a single cantilever setup. Extending curing duration increased the material's glass-transition temperature from -26°C after 6 h to 13°C after 72 h of curing. Fourier-transform infrared spectroscopy confirmed the associated progressive conversion of functional groups consistent with polyester formation. Slow recovery rates and low levels of shape recovery (22-70%) were found for samples cured less than 24 h. Those results also indicated a high dependence on the measurement approach. In contrast, samples cured for 48 and 72 h exhibited faster recovery rates, a significantly higher recovery percentage (90-100%) and were less sensitive to the measurement approach. Results demonstrated that once a sufficient curing threshold was achieved, additional curing time could be used to tune the material glass-transition temperature and create heat-triggered 3D-printed products.

Instability-Induced Pattern Formations in Soft Magnetoactive Composites

Elastic instabilities can trigger dramatic microstructure transformations giving rise to unusual behavior in soft matter. Motivated by this phenomenon, we study instability-induced pattern formations in soft magnetoactive elastomer (MAE) composites deforming in the presence of a magnetic field. We show that identical MAE composites with periodically distributed particles can switch to a variety of new patterns with different periodicity upon developments of instabilities. The newly formed patterns and postbuckling behavior of the MAEs are dictated by the magnitude of the applied magnetic field. We identify the particular levels of magnetic fields that give rise to strictly doubled or multiplied periodicity upon the onset of instabilities in the periodic particulate soft MAE. Thus, the predicted phenomenon can be potentially used for designing new reconfigurable soft materials with tunable material microstructures remotely controlled by a magnetic field.

3D Self-Assembled Microelectronic Devices: Concepts, Materials, Applications

Modern microelectronic systems and their components are essentially 3D devices that have become smaller and lighter in order to improve performance and reduce costs. To maintain this trend, novel materials and technologies are required that provide more structural freedom in 3D over conventional microelectronics, as well as easier parallel fabrication routes while maintaining compatability with existing manufacturing methods. Self-assembly of initially planar membranes into complex 3D architectures offers a wealth of opportunities to accommodate thin-film microelectronic functionalities in devices and systems possessing improved performance and higher integration density. Existing work in this field, with a focus on components constructed from 3D self-assembly, is reviewed, and an outlook on their application potential in tomorrow's microelectronics world is provided.

Phenazine-1,6-dicarboxamides: Redox-Responsive Molecular Switches

We introduce phenazine-1,6-dicarboxamides as redox-responsive molecular switches. The reduction of their phenazine core transforms them from hydrogen-bond acceptors into hydrogen-bond donors and thus forces the secondary amide substituents to turn around. The resulting conformational changes are envisioned to form the basis for butterfly coil foldamers undergoing reversible extension and contraction in response to changing their oxidation state.

Fully Biobased Shape Memory Thermoplastic Vulcanizates from Poly(Lactic Acid) and Modified Natural Eucommia Ulmoides Gum with Co-Continuous Structure and Super Toughness

Novel, fully biobased shape memory thermoplastic vulcanizates (TPVs) were prepared using two sustainable biopolymers, poly(lactic acid) (PLA), and modified natural Eucommia ulmoides gum (EUG-g-GMA), via a dynamic vulcanization technique. Simultaneously, in situ compatibilization was achieved in the TPVs to improve interfacial adhesion and the crosslinked modified Eucommia ulmoides gum (EUG) was in "netlike" continuous state in the PLA matrix to form "sea-sea" phase structure. The promoted interface and co-continuous structure played critical roles in enhancing shape memory capacity and toughness of the TPVs. The TPV with 40 wt % modified EUG displayed the highest toughness with an impact strength of 54.8 kJ/m2 and the most excellent shape memory performances with a shape fixity ratio (Rf) of 99.83% and a shape recovery ratio (Rr) of 93.74%. The prepared shape memory TPVs would open up great potential applications in biobased shape memory materials for smart medical devices.

Shape-Memory Polymers in Dentistry: Systematic Review and Patent Landscape Report

OBJECTIVE

To perform a systematic review (SR) of existing literature and a patent landscape report (PLR) regarding the potential applications of shape-memory polymers (SMPs) in dentistry.

SEARCH STRATEGY

Clinical and Biomedical online databases (Pubmed, Medline via Embase, Scopus, LILACS, Web of Science, Cochrane Library), Materials Science and Engineering databases (IEEE Explore, Compendex, Proquest), Material Science and Chemical database (Reaxys) so as Patents databases (Questel-Orbit, Espacenet, Patentscope) were consulted as recently as January 2019 to identify all papers and patents potentially relevant to the review. The reference lists of all eligible studies were hand searched for additional published work.

RESULTS

After duplicate selection and extraction procedures, 6 relevant full-text articles from the initial 302 and 45 relevant patents from 497 were selected. A modified Consolidated Standards of Reporting Trials (CONSORT) checklist of 14 items for reporting pre-clinical in-vitro studies was used to rate the methodological quality of the selected papers. The overall quality was judged low.

CONCLUSIONS

Despite the great potential and versatility of SMPs, it was not possible to draw evidence-based conclusions supporting their immediate employment in clinical dentistry. This was due to the weak design and a limited number of studies included within this review and reflects the fact that additional research is mandatory to determine whether or not the use of SMPs in dentistry could be effective. Nevertheless, the qualitative analysis of selected papers and patents indicate that SMPs are promising materials in dentistry because of their programmable physical properties. These findings suggest the importance of furtherly pursuing this line of research.

Theoretical investigation on the ground state properties of the hexaamminecobalt(iii) and nitro-nitrito linkage isomerism in pentaamminecobalt(iii) in vacuo

Nitro-nitrito isomerization in Co(NH3)5NO2 2+ linkage isomers was investigated with a focus on the geometries, relative stabilities and chemical bonding using ωB97XD/6-31+G(d,p) to elucidate the photo-salient effect in [Co(NH3)5NO2]NO3Cl. Different techniques like atoms in molecules (AIM), electron localization function (ELF) and natural bonding orbital (NBO) were used to gain insight into the chemical bonds of the isomers and to identify the key factors influencing their relative stabilities. The study of the ground-state potential energy surface of [Co(NH3)5NO2]2+ reveals that the nitro/exo-nitrito isomerization reaction can proceed via the following two paths: (1) nitro → TS1 (38.16 kcal mol-1) → endo-nitrito → TS2 (9.68 kcal mol-1) → exo-nitrito and (2) nitro → TS3 (41.76 kcal mol-1) → exo-nitrito. Pathway (1) through endo-nitrito is the most likely isomerization mechanism because of a lower energy barrier than pathway (2). The intramolecular-resonance-assisted hydrogen bonds (N-H⋯O and N-H⋯N), the orientation of NO2, and the difference between Co-N and Co-O bond energies are identified as the key factors determining the relative stabilities of the linkage isomers. Co(NH3)6 3+ is less stable compared to Co(NH3)5NO2 2+ and undergoes a slight geometrical distortion from D 3d to either D 3 or S 6 characterized by a stabilization energy of ∼750 cm-1 at CCSD(T)/6-31+G(d,p).

Influence of Layer Thickness, Raster Angle, Deformation Temperature and Recovery Temperature on the Shape-Memory Effect of 3D-Printed Polylactic Acid Samples

The success of the 3D-printing process depends upon the proper selection of process parameters. However, the majority of current related studies focus on the influence of process parameters on the mechanical properties of the parts. The influence of process parameters on the shape-memory effect has been little studied. This study used the orthogonal experimental design method to evaluate the influence of the layer thickness H, raster angle θ, deformation temperature Td and recovery temperature Tr on the shape-recovery ratio Rr and maximum shape-recovery rate Vm of 3D-printed polylactic acid (PLA). The order and contribution of every experimental factor on the target index were determined by range analysis and ANOVA, respectively. The experimental results indicated that the recovery temperature exerted the greatest effect with a variance ratio of 416.10, whereas the layer thickness exerted the smallest effect on the shape-recovery ratio with a variance ratio of 4.902. The recovery temperature exerted the most significant effect on the maximum shape-recovery rate with the highest variance ratio of 1049.50, whereas the raster angle exerted the minimum effect with a variance ratio of 27.163. The results showed that the shape-memory effect of 3D-printed PLA parts depended strongly on recovery temperature, and depended more weakly on the deformation temperature and 3D-printing parameters.

Scientific developments of liquid crystal-based optical memory: a review

The memory behavior in liquid crystals (LCs), although rarely observed, has made very significant headway over the past three decades since their discovery in nematic type LCs. It has gone from a mere scientific curiosity to application in variety of commodities. The memory element formed by numerous LCs have been protected by patents, and some commercialized, and used as compensation to non-volatile memory devices, and as memory in personal computers and digital cameras. They also have the low cost, large area, high speed, and high density memory needed for advanced computers and digital electronics. Short and long duration memory behavior for industrial applications have been obtained from several LC materials, and an LC memory with interesting features and applications has been demonstrated using numerous LCs. However, considerable challenges still exist in searching for highly efficient, stable, and long-lifespan materials and methods so that the development of useful memory devices is possible. This review focuses on the scientific and technological approach of fascinating applications of LC-based memory. We address the introduction, development status, novel design and engineering principles, and parameters of LC memory. We also address how the amalgamation of LCs could bring significant change/improvement in memory effects in the emerging field of nanotechnology, and the application of LC memory as the active component for futuristic and interesting memory devices.

Recent advances in degradable lactide-based shape-memory polymers

Biodegradable polymers are versatile polymeric materials that have a high potential in biomedical applications avoiding subsequent surgeries to remove, for example, an implanted device. In the past decade, significant advances have been achieved with poly(lactide acid) (PLA)-based materials, as they can be equipped with an additional functionality, that is, a shape-memory effect (SME). Shape-memory polymers (SMPs) can switch their shape in a predefined manner upon application of a specific external stimulus. Accordingly, SMPs have a high potential for applications ranging from electronic engineering, textiles, aerospace, and energy to biomedical and drug delivery fields based on the perspectives of new capabilities arising with such materials in biomedicine. This study summarizes the progress in SMPs with a particular focus on PLA, illustrates the design of suitable homo- and copolymer structures as well as the link between the (co)polymer structure and switching functionality, and describes recent advantages in the implementation of novel switching phenomena into SMP technology.

Harnessing viscoelasticity and instabilities for tuning wavy patterns in soft layered composites

In this study, we combine the elastic instability and non-linear rate-dependent phenomena to achieve microstructure tunability in soft layered materials. In these soft composites, elastic instabilities give rise to formation of wrinkles or wavy patterns. In elastic materials, the critical wavelength as well as amplitude at a particular strain level are exclusively defined by the composite microstructure and contrast in the elastic moduli of the phases. Here, we propose to use rate-dependent soft constituents to increase the admissible range of tunable microstructures. Through the experiments on 3D printed soft laminates, and through the numerical simulation of the visco-hyperelastic composites, we demonstrate the existence of various instability-induced wavy patterns corresponding to the identical deformed state of the identical soft composites.

Preparation of photochromic paper, using fibre-attached spiropyran polymer networks

Spiropyran-based photochromic paper was prepared by covalent immobilisation of functional polymer networks. The sensitivity of the UV-induced colour change was dynamically adjusted by a damping method. Thereby, a colourimetric UV sensor was designed.

Preparation and model of high-performance shape-memory polyurethane with hydroxylated perylene bisimide

3,4,9,10-Perylene tetracarboxylic anhydride (PTCDA) was reacted with tris(hydroxymethyl)methyl aminomethane (THAM) to form the corresponding hydroxylated perylene bisimide (PBI).

Multiple shape memory polymers for self-deployable device

Three-segments MH copolymers with well-separated glass transition temperatures can subsequently change their shapes in a pre-defined way.