Cell morphology and migration linked to substrate rigidity

Phototuning of Hyaluronic-Acid-Based Hydrogel Properties to Control Network Formation in Human Vascular Endothelial Cells

In vitro network formation by endothelial cells serves as a fundamental model for studies aimed at understanding angiogenesis. The morphogenesis of these cells to form a network is intricately regulated by the mechanical and biochemical properties of the extracellular matrix. Here the effects of modulating these properties in hydrogels derived from phenolated hyaluronic acid (HA-Ph) and phenolated gelatin (Gelatin-Ph) are presented. Visible-light irradiation in the presence of tris(2,2'-bipyridyl)ruthenium(II) chloride hexahydrate and sodium persulfate induces the crosslinking of these polymers, thereby forming a hydrogel and degrading HA-Ph. Human vascular endothelial cells form networks on the hydrogel prepared by visible-light irradiation for 45 min (42 W cm-2 at 450 nm) but not on the hydrogels prepared by irradiation for 15, 30, or 60 min. The irradiation time-dependent degradation of HA-Ph and the changes in the mechanical stiffness of the hydrogels, coupled with the expressions of RhoA and β-actin genes and CD44 receptors in the cells, reveal that the network formation is synergistically influenced by the hydrogel stiffness and HA-Ph degradation. These findings highlight the potential of tailoring HA-based hydrogel properties to modulate human vascular endothelial cell responses, which is critical for advancing their application in vascular tissue engineering.

Macrophages and fibroblasts in foreign body reactions: How mechanical cues drive cell functions?

Biomaterials, when implanted in the human body, can induce a series of cell- and cytokine-related reactions termed foreign body reactions (FBRs). In the progression of FBRs, macrophages regulate inflammation and healing by polarizing to either a pro-inflammatory or pro-healing phenotype and recruit fibroblasts by secreting cytokines. Stimulated by the biomaterials, fibrotic capsule is formed eventually. The implant, along with its newly formed capsule, introduces various mechanical cues that influence cellular functions. Mechanosensing proteins, such as integrins or ion channels, transduce extracellular mechanical signals into cytoplasm biochemical signals in response to mechanical stimuli. Consequently, the morphology, migration mode, function, and polarization state of the cells are affected. Modulated by different intracellular signaling pathways and their crosstalk, the expression of fibrotic genes increases with fibroblast activation and fibroblast to myofibroblast transition under stiff or force stimuli. However, summarized in most current studies, the outcomes of macrophage polarization in the effect of different mechanical cues are inconsistent. The underlying mechanisms should be investigated with more advanced technology and considering more interfering aspects. Further research is needed to determine how to modulate the progression of fibrotic capsule formation in FBR artificially.

Human Umbilical Vein Endothelial Cells Form a Network on a Hyaluronic Acid/Gelatin Composite Hydrogel Moderately Crosslinked and Degraded by Hydrogen Peroxide

The study of the capillary-like network formation of human umbilical vein endothelial cells (HUVECs) in vitro is important for understanding the factors that promote or inhibit angiogenesis. Here, we report the behavior of HUVECs on the composite hydrogels containing hyaluronic acid (HA) and gelatin with different degrees of degradation, inducing the different physicochemical properties of the hydrogels. The hydrogels were obtained through horseradish peroxidase (HRP)-catalyzed hydrogelation consuming hydrogen peroxide (H₂O₂, 16 ppm) supplied from the air, and the degradation degree was tuned by altering the exposure time to the air. The HUVECs on the composite hydrogel with intermediate stiffness (1.2 kPa) obtained through 120 min of the exposure were more elongated than those on the soft (0.4 kPa) and the stiff (2.4 kPa) composite hydrogels obtained through 15 min and 60 min of the exposure, respectively. In addition, HUVECs formed a capillary-like network only on the stiff composite hydrogel although those on the hydrogels with comparable stiffness but containing gelatin alone or alginate instead of HA did not form the network. These results show that the HA/gelatin composite hydrogels obtained through the H₂O₂-mediated crosslinking and degradation could be a tool for studies using HUVECs to understand the promotion and inhibition of angiogenesis.

Modulation of Cell-Cycle Progression by Hydrogen Peroxide-Mediated Cross-Linking and Degradation of Cell-Adhesive Hydrogels

The cell cycle is known to be regulated by features such as the mechanical properties of the surrounding environment and interaction of cells with the adhering substrates. Here, we investigated the possibility of regulating cell-cycle progression of the cells on gelatin/hyaluronic acid composite hydrogels obtained through hydrogen peroxide (H₂O₂)-mediated cross-linking and degradation of the polymers by varying the exposure time to H₂O₂ contained in the air. The stiffness of the hydrogel varied with the exposure time. Human cervical cancer cells (HeLa) and mouse mammary gland epithelial cells (NMuMG) expressing cell-cycle reporter Fucci2 showed the exposure-time-dependent different cell-cycle progressions on the hydrogels. Although HeLa/Fucci2 cells cultured on the soft hydrogel (Young’s modulus: 0.20 and 0.40 kPa) obtained through 15 min and 120 min of the H₂O₂ exposure showed a G2/M-phase arrest, NMuMG cells showed a G1-phase arrest. Additionally, the cell-cycle progression of NMuMG cells was not only governed by the hydrogel stiffness, but also by the low-molecular-weight HA resulting from H₂O₂-mediated degradation. These results indicate that H₂O₂-mediated cross-linking and degradation of gelatin/hyaluronic acid composite hydrogel could be used to control the cell adhesion and cell-cycle progression.

Micromechanical Compatibility between Cells and Scaffolds Directs the Phenotypic Transition of Stem Cells

This study experimentally substantiates that the micromechanical compatibility between cell and substrate is essential for cells to achieve energetically favorable mechanotransduction that directs phenotypic transitions. The argument for this compatibility is based on a thermodynamic model that suggests that the response of cells to their substrate mechanical environment is a consequence of the interchange between forms of energy governing the cell-substrate interaction. Experimental validation for the model has been carried out by investigating the osteogenic differentiation of dental follicle stem cells (DFSCs) seeded on electrospun fibrous scaffolds. Electrospinning of blends containing polycaprolactone (PCL) and silk fibroin (SF) with varying composition of cellulose nanocrystals (CNCs) resulted in three-dimensional (3D) fibrous scaffolds with bimodal distribution of fiber diameter, which provides both macroscopically stiff and microscopically compliant scaffolds for cells without affecting the surface chemical functionality of scaffolds. Atomic force microscopy (AFM) with a colloidal probe and single-cell force spectroscopy were used to characterize cell stiffness and scaffold stiffness on the cellular level, as well as cell-scaffold adhesive interaction (chemical functionality). This study has successfully varied scaffold mechanical properties without affecting their surface chemistry. In vitro tests indicate that the micromechanical compatibility between cells and scaffolds has been significantly correlated with mechanosensitive gene expression markers and osteogenic differentiation markers of DFSCs. The agreement between experimental observations and the thermodynamic model affirms that the cellular response to the mechanical environment, though biological in nature, follows the laws of the energy interchange to achieve its self-regulating behavior. More importantly, this study provides systematic evidence, through extensive and rigorous experimental studies, for the first time that rationalizes that micromechanical compatibility is indeed important to the efficacy of regenerative medicine.

Influence of Hydrogen Peroxide-Mediated Cross-Linking and Degradation on Cell-Adhesive Gelatin Hydrogels

Hydrogen peroxide (H₂O₂) is widely used for the gelation of aqueous solutions of gelatin derivatives with phenolic hydroxyl groups (Gelatin-Ph) catalyzed by horseradish peroxidase (HRP). Apart from this, H₂O₂ is known to cause degradation/depolymerization of various polymers. Here, we prepared Gelatin-Ph hydrogels from solutions containing Gelatin-Ph and HRP by continuously supplying H₂O₂ from the gas phase and investigated the mechanical properties of resultant hydrogels and the behaviors of rat fibroblast and human adipose-derived stem cells on them. Young's modulus of the hydrogel obtained from 5 w/v % Gelatin-Ph and 1 and 5 U/mL HRP increased when the exposure time to air containing H₂O₂ (16 ppm) was extended from 15 to 30 min. However, further prolonging the exposure time to 60 min reduced Young's modulus to the same magnitude as for the hydrogels exposed to air containing H₂O₂ for 15 min. Interestingly, the cell length and aspect ratio of the cells continued to increase, as the exposure time was extended, without reflecting the decrease in Young's modulus. These results indicate that when preparing Gelatin-Ph hydrogels through HRP/H₂O₂-mediated gelation, it is necessary to consider the effect of the degradation of Gelatin-Ph caused by H₂O₂ on the mechanical properties of the resultant hydrogels and the behaviors of cells on them.

Development and characterisation of cytocompatible polyester substrates with tunable mechanical properties and degradation rate

Although it has been repeatedly indicated the importance to develop implantable devices and cell culture substrates with tissue-specific rigidity, current commercially available products, in particular cell culture substrates, have rigidity values well above most tissues in the body. Herein, six resorbable polyester films were fabricated using compression moulding with a thermal presser into films with tailored stiffness by appropriately selecting the ratio of their building up monomers (e.g. lactide, glycolide, trimethylene carbonate, dioxanone, ε-caprolactone). Typical NMR and FTIR spectra were obtained, suggesting that the fabrication process did not have a negative effect on the conformation of the polymers. Surface roughness analysis revealed no apparent differences between the films as a function of polymer composition. Subject to polymer composition, polymeric films were obtained with glass transition temperatures from -52 °C to 61 °C; contact angles in water from 81 ° to 94 °; storage modulus from 108 MPa to 2,756 MPa and loss modulus from 8 MPa to 507 MPa (both in wet state, at 1 Hz frequency and at 37 °C); ultimate tensile strength from 8 MPa to 62 MPa, toughness from 23 MJ/m³ to 287 MJ/m³, strain at break from 3 % to 278 %, macro-scale Young's modulus from 110 MPa to 2,184 MPa (all in wet state); and nano-scale Young's modulus from 6 kPa to 15,019 kPa (in wet state). With respect to in vitro degradation in phosphate buffered saline at 37 °C, some polymeric films [e.g. poly(glycolide-lactide) 30 / 70] started degrading from day 7 (shortest timepoint assessed), whilst others [e.g. poly(glycolide-co-ε-caprolactone) 10 / 90] were more resilient to degradation up to day 21 (longest timepoint assessed). In vitro biological analysis using human dermal fibroblasts and a human monocyte cell line (THP-1) showed the potential of the polymeric films to support cell growth and controlled immune response. Evidently, the selected polymers exhibited properties suitable for a range of clinical indications.

Durotaxis: The Hard Path from In Vitro to In Vivo

Durotaxis, the process by which cells follow gradients of extracellular mechanical stiffness, has been proposed as a mechanism driving directed migration. Despite the lack of evidence for its existence in vivo, durotaxis has become an active field of research, focusing on the mechanism by which cells respond to mechanical stimuli from the environment. In this review, we describe the technical and conceptual advances in the study of durotaxis in vitro, discuss to what extent the evidence suggests durotaxis may occur in vivo, and emphasize the urgent need for in vivo demonstration of durotaxis.

Effects of extracellular matrix rigidity on sonoporation facilitated by targeted microbubbles: Bubble attachment, bubble dynamics, and cell membrane permeabilization

In this study, we investigated the effects of extracellular matrix rigidity, an important physical property of microenvironments regulating cell morphology and functions, on sonoporation facilitated by targeted microbubbles, highlighting the role of microbubbles. We conducted mechanistic studies at the cellular level on physiologically relevant soft and rigid substrates. By developing a unique imaging strategy, we first resolved details of the 3D attachment configurations between targeted microbubbles and cell membrane. High-speed video microscopy then unveiled bubble dynamics driven by a single ultrasound pulse. Finally, we evaluated the cell membrane permeabilization using a small molecule model drug. Our results demonstrate that: (1) stronger targeted microbubble attachment was formed for cells cultured on the rigid substrate, while six different attachment configurations were revealed in total; (2) more violent bubble oscillation was observed for cells cultured on the rigid substrate, while one third of bubbles attached to cells on the soft substrate exhibited deformation shortly after ultrasound was turned off; (3) higher acoustic pressure was needed to permeabilize the cell membrane for cells on the soft substrate, while under the same ultrasound condition, acoustically-activated microbubbles generated larger pores as compared to cells cultured on the soft substrate. The current findings provide new insights to understand the underlying mechanisms of sonoporation in a physiologically relevant context and may be useful for the clinical translation of sonoporation.

Cell Shape and Durotaxis Explained from Cell-Extracellular Matrix Forces and Focal Adhesion Dynamics

Many cells are small and rounded on soft extracellular matrices (ECM), elongated on stiffer ECMs, and flattened on hard ECMs. Cells also migrate up stiffness gradients (durotaxis). Using a hybrid cellular Potts and finite-element model extended with ODE-based models of focal adhesion (FA) turnover, we show that the full range of cell shape and durotaxis can be explained in unison from dynamics of FAs, in contrast to previous mathematical models. In our 2D cell-shape model, FAs grow due to cell traction forces. Forces develop faster on stiff ECMs, causing FAs to stabilize and, consequently, cells to spread on stiff ECMs. If ECM stress further stabilizes FAs, cells elongate on substrates of intermediate stiffness. We show that durotaxis follows from the same set of assumptions. Our model contributes to the understanding of the basic responses of cells to ECM stiffness, paving the way for future modeling of more complex cell-ECM interactions.

Migration of the 3T3 Cell with a Lamellipodium on Various Stiffness Substrates—Tensegrity Model

Changes in mechanical stimuli and the physiological environment are sensed by the cell. Thesechanges influence the cell’s motility patterns. The cell’s directional migration is dependent on the substrate stiffness. To describe such behavior of a cell, a tensegrity model was used. Cells with an extended lamellipodium were modeled. The internal elastic strain energy of a cell attached to the substrates with different stiffnesses was evaluated. The obtained results show that on the stiffer substrate, the elastic strain energy of the cell adherent to this substrate decreases. Therefore, the substrate stiffness is one of the parameters that govern the cell’s directional movement.

Biomimetic polyvinyl alcohol/type II collagen hydrogels for cartilage tissue engineering

Type II collagen (Col-II) is one of the important organic components of the cartilage extracellular matrix (ECM). Such natural material is known for its good biocompatibility, but it could not provide a good supporting environment for seed cells due to its rapid degradation and poor strength. In the present work, different contents of Col-II were incorporated into porous polyvinyl alcohol (PVA) to fabricate porous PVA/Col-II composite hydrogels for cartilage tissue engineering. The results illustrate that, after incorporation of Col-II, the elasticity modulus of the composite hydrogels firstly increases, and then decreases (under moisture state). The elasticity modulus of PVA/Col-II (at the ratio of 1:1) hydrogels reaches 11 ± 1.7 KPa, about two-fold higher than pure PVA hydrogels (4.9 ± 0.6 KPa). Meanwhile, all hydrogels exhibit relatively high water content (> 95%) and porosity (> 75%). The degradation analysis indicates that Col-II incorporation induce a high degradation ratio of the composite hydrogels. Cell culture results show PVA/Col-II hydrogels have no negative effects on cells viability and proliferation. The PVA/Col-II hydrogels may possess a potential application in the field of articular cartilage tissue engineering and regeneration.

Energy-Mediated Machinery Drives Cellular Mechanical Allostasis

Allostasis is a fundamental biological process through which living organisms achieve stability via physiological or behavioral changes to protect against internal and external stresses, and ultimately better adapt to the local environment. However, an full understanding of cellular-level allostasis is far from developed. By employing an integrated micromechanical tool capable of applying controlled mechanical stress on an individual cell and simultaneously reporting dynamic information of subcellular mechanics, individual cell allostasis is observed to occur through a biphasic process; cellular mechanics tends to restore to a stable state through a mechanoadaptative process with excitative biophysical activity followed by a decaying adaptive phase. Based on these observations, it is found that cellular allostasis occurs through a complex balance of subcellular energy and cellular mechanics; upon a transient and local physical stimulation, cells trigger an allostatic state that maximizes energy and overcomes a mechanical "energy barrier" followed by a relaxation state that reaches its mechanobiological stabilization and energy minimization. Discoveries of energy-driven cellular machinery and conserved mechanotransductive pathways underscore the critical role of force-sensitive cytoskeleton equilibrium in cellular allostasis. This highlight the biophysical origin of cellular mechanical allostasis, providing subcellular methods to understand the etiology and progression of certain diseases or aging.

Carbon nanotube reinforced polyvinyl alcohol/biphasic calcium phosphate scaffold for bone tissue engineering

In this paper, a well-developed porous carbon nanotube (CNT) reinforced polyvinyl alcohol/biphasic calcium phosphate (PVA/BCP) scaffold was fabricated by a freeze-thawing and freeze-drying method. The microstructure, mechanical properties and the composition of the scaffolds were characterized by field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR). The results illustrate that after the incorporation of CNTs, the compressive strength of the hydrogels (moisture state) reached 81 ± 6 kPa, presenting a significantly higher value than that of pure PVA/BCP hydrogels (48 ± 2 kPa). Meanwhile, CNT reinforced PVA/BCP scaffolds exhibited a porous structure and high interconnectivity (80 ± 0.6%). The degradation analysis indicated that the degradation ratio of scaffolds can be varied by changing the concentrations of BCP powders and CNTs. Cell culture results show that PVA/BCP/CNT porous scaffolds have no negative effects on the survival and proliferation of cells. These results strongly show that the composite scaffolds may possess a potential application in the field of bone tissue engineering and regeneration.

In this paper, a well-developed porous carbon nanotube (CNT) reinforced polyvinyl alcohol/biphasic calcium phosphate (PVA/BCP) scaffold was fabricated by a freeze-thawing and freeze-drying method.

Cell behavior on the alginate-coated PLLA/PLGA scaffolds

Here, we investigated the effect of preparation temperature and alginate-coating on L929 fibroblast behavior on lyophilized microporous PLLA/PLGA (95:5, w/w) scaffolds. The lower freezing temperature used during lyophilization (-80 °C) resulted in smaller pores (around 50 μm) and higher compressive modulus (1500 kPa) than those prepared at the higher temperature (-20 °C) (pore size: 120 μm, compressive modulus: 600 kPa) (p < 0.01). Cell proliferation was significantly lower on the alginate-coated scaffolds (p < 0.05), probably due to weak cell adhesion on alginate, rapid degradation/dissolution of the alginate hydrogel (40% weight loss after 2 weeks of incubation) (p < 0.05), which resulted in loss of material and cells, and the decrease in the pH (p < 0.05), which probably resulted in decreased cell metabolic activity. Cells tended to get less round on the scaffolds prepared at -20 °C, which had lower compressive modulus and larger pores, and upon coating with alginate, which resulted in a hydrophilic surface that had lower stiffness. When the scaffolds had closer stiffness to the cells, the cells tended to get more branched. The most branched morphology of the fibroblasts was obtained in the presence of alginate, a natural polymer having a similar stiffness with that of the L929 fibroblasts (4 kPa).

Sensing of substratum rigidity and directional migration by fast-crawling cells

Living cells sense the mechanical properties of their surrounding environment and respond accordingly. Crawling cells detect the rigidity of their substratum and migrate in certain directions. They can be classified into two categories: slow-moving and fast-moving cell types. Slow-moving cell types, such as fibroblasts, smooth muscle cells, mesenchymal stem cells, etc., move toward rigid areas on the substratum in response to a rigidity gradient. However, there is not much information on rigidity sensing in fast-moving cell types whose size is ∼10 μm and migration velocity is ∼10 μm/min. In this study, we used both isotropic substrata with different rigidities and an anisotropic substratum that is rigid on the x axis but soft on the y axis to demonstrate rigidity sensing by fast-moving Dictyostelium cells and neutrophil-like differentiated HL-60 cells. Dictyostelium cells exerted larger traction forces on a more rigid isotropic substratum. Dictyostelium cells and HL-60 cells migrated in the "soft" direction on the anisotropic substratum, although myosin II-null Dictyostelium cells migrated in random directions, indicating that rigidity sensing of fast-moving cell types differs from that of slow types and is induced by a myosin II-related process.

Effects of microarchitecture and mechanical properties of 3D microporous PLLA-PLGA scaffolds on fibrochondrocyte and L929 fibroblast behavior

There are several reports studying cell behavior on surfaces in 2D or in hydrogels in 3D. However, cell behavior in 3D microporous scaffolds has not been investigated extensively. In this study, poly(L-lactic acid)/poly(lactic acid-co-glycolic acid) (PLLA/PLGA)-based microporous scaffolds were used to study the effects of scaffold microarchitecture and mechanical properties on the behavior of two different cell types, human meniscal fibrochondrocytes and L929 mouse fibroblasts. In general, cell attachment, spreading and proliferation rate were mainly regulated by the strut (pore wall) stiffness. Increasing strut stiffness resulted in an increase in L929 fibroblast attachment and a decrease in fibrochondrocyte attachment. L929 fibroblasts tended to get more round as the strut stiffness increased, while fibrochondrocytes tended to get more elongated. Cell migration increased for both cell types with the increasing pore size. Migrating L929 fibroblasts tended to get more round on the stiff scaffolds, while fibrochondrocytes tended to get more round on the soft scaffolds. This study shows that the behavior of cells on 3D microporous scaffolds is mainly regulated by pore size and strut stiffness, and the response of a cell depends on the stiffness of both cells and materials. This study could be useful in designing better scaffolds for tissue engineering applications.

Contact guidance diversity in rotationally aligned collagen matrices

Cancer cell metastasis is responsible for approximately 90% of deaths related to cancer. The migration of cancer cells away from the primary tumor and into healthy tissue is driven in part by contact guidance, or directed migration in response to aligned extracellular matrix. While contact guidance has been a focus of many studies, much of this research has explored environments that present 2D contact guidance structures. Contact guidance environments in 3D more closely resemble in vivo conditions and model cell-ECM interactions better than 2D environments. While most cells engage in directed migration on potent 2D contact guidance cues, there is diversity in response to contact guidance cues based on whether the cell migrates with a mesenchymal or amoeboid migration mode. In this paper, rotational alignment of collagen gels was used to study the differences in contact guidance between MDA-MB-231 (mesenchymal) and MTLn3 (amoeboid) cells. MDA-MB-231 cells migrate with high directional fidelity in aligned collagen gels, while MTLn3 cells show no directional migration. The collagen stiffness was increased through glycation, resulting in decreased MDA-MB-231 directionality in aligned collagen gels. Interestingly, partial inhibition of cell contractility dramatically decreased directionality in MDA-MB-231 cells. The directionality of MDA-MB-231 cells was most sensitive to ROCK inhibition, but unlike in 2D contact guidance environments, cell directionality and speed are more tightly coupled. Modulation of the contractile apparatus appears to more potently affect contact guidance than modulation of extracellular mechanical properties of the contact guidance cue.

STATEMENT OF SIGNIFICANCE

Collagen fiber alignment in the tumor microenvironment directs migration, a process called contact guidance, enhancing the efficiency of cancer invasion and metastasis. 3D systems that assess contact guidance by locally orienting collagen fiber alignment are lacking. Furthermore, cell type differences and the role of extracellular matrix stiffness in tuning contact guidance fidelity are not well characterized. In this paper rotational alignment of collagen fibers is used as a 3D contact guidance cue to illuminate cell type differences and the role of extracellular matrix stiffness in guiding cell migration along aligned fibers of collagen. This local alignment offers a simple approach by which to couple collagen alignment with gradients in other directional cues in devices such as microfluidic chambers.

"Active" drops as phantom models for living cells: a mesoscopic particle-based approach

Drops and biological cells share some morphological features and visco-elastic properties. The modelling of drops by mesoscopic non-atomistic models has been carried out to a high degree of success in recent years. We extend such treatment and discuss a simple, drop-like model to describe the interactions of the outer layer of cells with the surfaces of materials. Cells are treated as active mechanical objects that are able to generate adhesion forces. They appear with their true size and are made of "parcels of fluids" or beads. The beads are described by (very) few quantities/parameters related to fundamental chemical forces such as hydrophilicity and lipophilicity that represent an average of the properties of a patch of material or an area of the cell(s) surface. The investigation of adhesion dynamics, motion of individual cells, and the collective behavior of clusters of cells on materials is possible. In the simulations, the drops become active soft matter objects and different from regular droplets they do not fuse when in contact, their trajectories are not Brownian, and they can be forced "to secrete" molecules, to name some of the properties targeted by the modeling. The behavior that emerges from the simulations allows ascribing some cell properties to their mechanics, which are related to their biological features.

Mechanosensitive store-operated calcium entry regulates the formation of cell polarity

Ca(2+) -mediated formation of cell polarity is essential for directional migration which plays an important role in physiological and pathological processes in organisms. To examine the critical role of store-operated Ca(2+) entry, which is the major form of extracellular Ca(2+) influx in non-excitable cells, in the formation of cell polarity, we employed human bone osteosarcoma U2OS cells, which exhibit distinct morphological polarity during directional migration. Our analyses showed that Ca(2+) was concentrated at the rear end of cells and that extracellular Ca(2+) influx was important for cell polarization. Inhibition of store-operated Ca(2+) entry using specific inhibitors disrupted the formation of cell polarity in a dose-dependent manner. Moreover, the channelosomal components caveolin-1, TRPC1, and Orai1 were concentrated at the rear end of polarized cells. Knockdown of TRPC1 or a TRPC inhibitor, but not knockdown of Orai1, reduced cell polarization. Furthermore, disruption of lipid rafts or overexpression of caveolin-1 contributed to the downregulation of cell polarity. On the other hand, we also found that cell polarity, store-operated Ca(2+) entry activity, and cell stiffness were markedly decreased by low substrate rigidity, which may be caused by the disorganization of actin filaments and microtubules that occurs while regulating the activity of the mechanosensitive TRPC1 channel.

Three-dimensional numerical model of cell morphology during migration in multi-signaling substrates

Cell Migration associated with cell shape changes are of central importance in many biological processes ranging from morphogenesis to metastatic cancer cells. Cell movement is a result of cyclic changes of cell morphology due to effective forces on cell body, leading to periodic fluctuations of the cell length and cell membrane area. It is well-known that the cell can be guided by different effective stimuli such as mechanotaxis, thermotaxis, chemotaxis and/or electrotaxis. Regulation of intracellular mechanics and cell's physical interaction with its substrate rely on control of cell shape during cell migration. In this notion, it is essential to understand how each natural or external stimulus may affect the cell behavior. Therefore, a three-dimensional (3D) computational model is here developed to analyze a free mode of cell shape changes during migration in a multi-signaling micro-environment. This model is based on previous models that are presented by the same authors to study cell migration with a constant spherical cell shape in a multi-signaling substrates and mechanotaxis effect on cell morphology. Using the finite element discrete methodology, the cell is represented by a group of finite elements. The cell motion is modeled by equilibrium of effective forces on cell body such as traction, protrusion, electrostatic and drag forces, where the cell traction force is a function of the cell internal deformations. To study cell behavior in the presence of different stimuli, the model has been employed in different numerical cases. Our findings, which are qualitatively consistent with well-known related experimental observations, indicate that adding a new stimulus to the cell substrate pushes the cell to migrate more directionally in more elongated form towards the more effective stimuli. For instance, the presence of thermotaxis, chemotaxis and electrotaxis can further move the cell centroid towards the corresponding stimulus, respectively, diminishing the mechanotaxis effect. Besides, the stronger stimulus imposes a greater cell elongation and more cell membrane area. The present model not only provides new insights into cell morphology in a multi-signaling micro-environment but also enables us to investigate in more precise way the cell migration in the presence of different stimuli.

Polymerization of affinity ligands on a surface for enhanced ligand display and cell binding

Surfaces functionalized with affinity ligands have been widely studied for applications such as biological separations and cell regulation. While individual ligands can be directly conjugated onto a surface, it is often important to conjugate polyvalent ligands onto the surface to enhance ligand display. This study was aimed at exploring a method for surface functionalization via polymerization of affinity ligands, which was achieved through ligand hybridization with DNA polymers protruding from the surface. The surface with polyvalent ligands was evaluated via aptamer-mediated cell binding. The results show that this surface bound target cells more effectively than a surface directly functionalized with individual ligands in situations with either equal amounts of ligand display or equal amounts of surface reaction sites. Therefore, this study has demonstrated a new strategy for surface functionalization to enhance ligand display and cell binding. This strategy may find broad applications in settings where surface area is limited or the surface of a material does not possess sufficient reaction sites.

A novel mechanotactic 3D modeling of cell morphology

Cell morphology plays a critical role in many biological processes, such as cell migration, tissue development, wound healing and tumor growth. Recent investigations demonstrate that, among other stimuli, cells adapt their shapes according to their substrate stiffness. Until now, the development of this process has not been clear. Therefore, in this work, a new three-dimensional (3D) computational model for cell morphology has been developed. This model is based on a previous cell migration model presented by the same authors. The new model considers that during cell-substrate interaction, cell shape is governed by internal cell deformation, which leads to an accurate prediction of the cell shape according to the mechanical characteristic of its surrounding micro-environment. To study this phenomenon, the model has been applied to different numerical cases. The obtained results, which are qualitatively consistent with well-known related experimental works, indicate that cell morphology not only depends on substrate stiffness but also on the substrate boundary conditions. A cell located within an unconstrained soft substrate (several kPa) with uniform stiffness is unable to adhere to its substrate or to send out pseudopodia. When the substrate stiffness increases to tens of kPa (intermediate and rigid substrates), the cell can adequately adhere to its substrate. Subsequently, as the traction forces exerted by the cell increase, the cell elongates and its shape changes. Within very stiff (hard) substrates, the cell cannot penetrate into its substrate or send out pseudopodia. On the other hand, a cell is found to be more elongated within substrates with a constrained surface. However, this elongation decreases when the cell approaches it. It can be concluded that the higher the net traction force, the greater the cell elongation, the larger the cell membrane area, and the less random the cell alignment.

A peptide functionalized poly(ethylene glycol) (PEG) hydrogel for investigating the influence of biochemical and biophysical matrix properties on tumor cell migration

To address the challenges associated with defined control over matrix properties in 3D cell culture systems, we employed a peptide functionalized poly(ethylene glycol) (PEG) hydrogel matrix in which mechanical modulus and adhesive properties were tuned. An HT-1080 human fibrosarcoma cell line was chosen as a model for probing matrix influences on tumor cell migration using the PEG hydrogel platform. HT-1080 speed varied with a complex dependence on both matrix modulus and Cys-Arg-Gly-Asp-Ser (CRGDS) adhesion ligand concentration, with regimes in which motility increased, decreased, or was minimally altered being observed. We further investigated cell motility by forming matrix interfaces that mimic aspects of tissue boundaries that might be encountered during invasion by taking advantage of the spatial control of the thiol-ene photochemistry to form patterned regions of low and high cross-linking densities. HT-1080s in 100 Pa regions of patterned PEG hydrogels tended to reverse direction or aggregate at the interface when they encountered a 360 Pa boundary. In contrast, HT-1080s were apparently unimpeded when migrating from the stiff to the soft regions of PEG peptide hydrogels, which may indicate that cells are capable of "reverse durotaxis" within at least some matrix regimes. Taken together, our results identified matrix regimes in which HT-1080 motility was both positively and negatively influenced by cell adhesion or matrix modulus.

Characterizing the effects of heparin gel stiffness on function of primary hepatocytes

In the liver, hepatocytes are exposed to a large array of stimuli that shape hepatic phenotype. This in vivo microenvironment is lost when hepatocytes are cultured in standard cell cultureware, making it challenging to maintain hepatocyte function in vitro. Our article focused on one of the least studied inducers of the hepatic phenotype-the mechanical properties of the underlying substrate. Gel layers comprised of thiolated heparin (Hep-SH) and diacrylated poly(ethylene glycol) (PEG-DA) were formed on glass substrates via a radical mediated thiol-ene coupling reaction. The substrate stiffness varied from 10 to 110 kPa by changing the concentration of the precursor solution. ELISA analysis revealed that after 5 days, hepatocytes cultured on a softer heparin gel were synthesizing five times higher levels of albumin compared to those on a stiffer heparin gel. Immunofluorescent staining for hepatic markers, albumin and E-cadherin, confirmed that softer gels promoted better maintenance of the hepatic phenotype. Our findings point to the importance of substrate mechanical properties on hepatocyte function.

Relationships among cell morphology, intrinsic cell stiffness and cell-substrate interactions

Cell modulus (stiffness) is a critical cell property that is important in normal cell functions and increasingly associated with disease states, yet most methods to characterize modulus may skew results. Here we show strong evidence indicating that the fundamental nature of free energies associated with cell/substrate interactions regulates adherent cell morphology and can be used to deduce cell modulus. These results are based on a mathematical model of biophysics and confirmed by the measured morphology of normal and cancerous liver cells adhered on a substrate. Cells select their final morphology by minimizing the total free energy in the cell/substrate system. The key mechanism by which substrate stiffness influences cell morphology is the energy tradeoff between the stabilizing influence of the cell-substrate interfacial adhesive energy and the destabilizing influence of the total elastic energies in the system. Using these findings, we establish a noninvasive methodology to determine the intrinsic modulus of cells by observing global changes in cell morphology in response to substrate stiffness. We also highlight the importance of selecting a relevant morphological index, cell roundness, that reflects the interchange between forms of energy governing cell morphology. Thus, cell-substrate interactions can be rationalized by the underlying biophysics, and cell modulus is easily measured.

Gradient-free directional cell migration in continuous microchannels

Directing cell movements within 3D channels is a key challenge in biomedical devices and tissue engineering. In two dimensions, closely spaced arrays of asymmetric teardrop islands can intermittently polarize cells and sustain their autonomous directional migration with no gradients. However, in 3D microchannels composed of linearly connected teardrop segments, negligibly low directional bias is observed. Rather than adopt teardrop shapes, cells evade morphological polarization by spreading across multiple teardrop segments, only partly filling each. We demonstrate here that cells can be forced to adopt the shape of individual segments by connecting the segments at an angle to minimize cell spreading across multiple segments. The resulting rhythmic polarization leads to significant directional bias for NIH3T3 fibroblasts, epithelial cells, and even cells whose intracellular signalling have been purposely altered to affect lamellipodia extension (Rac1) and cell polarity (Cdc42). This gradient-free approach to directing cell migration in 3D microchannels may find significant applications in tissue scaffolds and cell on a chip devices.

Attenuation of cell mechanosensitivity in colon cancer cells during in vitro metastasis

Human colon carcinoma (HCT-8) cells show a stable transition from low to high metastatic state when cultured on appropriately soft substrates (21 kPa). Initially epithelial (E) in nature, the HCT-8 cells become rounded (R) after seven days of culture on soft substrate. R cells show a number of metastatic hallmarks [1]. Here, we use gradient stiffness substrates, a bio-MEMS force sensor, and Coulter counter assays to study mechanosensitivity and adhesion of E and R cells. We find that HCT-8 cells lose mechanosensitivity as they undergo E-to-R transition. HCT-8 R cells' stiffness, spread area, proliferation and migration become insensitive to substrate stiffness in contrast to their epithelial counterpart. They are softer, proliferative and migratory on all substrates. R cells show negligible cell-cell homotypic adhesion, as well as non-specific cell-substrate adhesion. Consequently they show the same spread area on all substrates in contrast to E cells. Taken together, these results indicate that R cells acquire autonomy and anchorage independence, and are thus potentially more invasive than E cells. To the best of our knowledge, this is the first report of quantitative data relating changes in cancer cell adhesion and stiffness during the expression of an in vitro metastasis-like phenotype.

Enzymatically cross-linked gelatin-phenol hydrogels with a broader stiffness range for osteogenic differentiation of human mesenchymal stem cells

An injectable hydrogel system, composed of gelatin-hydroxyphenylpropionic acid (Gtn-HPA) conjugates chemically cross-linked by an enzyme-mediated oxidation reaction, has been designed as a biodegradable scaffold for tissue engineering. In light of the role of substrate stiffness on cell differentiation, we herein report a newly improved Gtn hydrogel system with a broader range of stiffness control that uses Gtn-HPA-tyramine (Gtn-HPA-Tyr) conjugates to stimulate the osteogenic differentiation of human mesenchymal stem cells (hMSCs). The Gtn-HPA-Tyr conjugate was successfully synthesized through a further conjugation of Tyr to Gtn-HPA conjugate by means of a general carbodiimide/active ester-mediated coupling reaction. Proton nuclear magnetic resonance and UV-visible measurements showed a higher total phenol content in the Gtn-HPA-Tyr conjugate than that content in the Gtn-HPA conjugate. The Gtn-HPA-Tyr hydrogels were formed by the oxidative coupling of phenol moieties catalyzed by hydrogen peroxide (H(2)O(2)) and horseradish peroxidase (HRP). Rheological studies revealed that a broader range of storage modulus (G') of Gtn-HPA-Tyr hydrogel (600-26,800 Pa) was achieved using different concentrations of H(2)O(2), while the G' of the predecessor Gtn-HPA hydrogels was limited to the range of 1000 to 13,500 Pa. The hMSCs on Gtn-HPA-Tyr hydrogel with G' greater than 20,000 showed significantly up-regulated expressions of osteocalcin and runt-related transcription factor 2 (RUNX2) on both the gene and protein level, with the presence of alkaline phosphatase, and the evidence of calcium accumulation. These studies with the Gtn-HPA-Tyr hydrogel with G' greater than 20,000 collectively suggest the stimulation of the hMSCs into osteogenic differentiation, while these same observations were not found with the Gtn-HPA hydrogel with a G' of 13,500.

Cell-substrate interaction with cell-membrane-stress dependent adhesion

Cell-substrate interaction is examined in a two-dimensional mechanics model. The cell and substrate are treated as a shell and an elastic solid, respectively. Their interaction through adhesion is treated using nonlinear springs. Compared to previous cell mechanics models, the present model introduces a cohesive force law that is dependent not only on cell-substrate distance but also on internal cell-membrane stress. It is postulated that a living cell would establish focal adhesion sites with density dependent on the cell-membrane stress. The formulated mechanics problem is numerically solved using coupled finite elements and boundary elements for the cell and the substrate, respectively. The nodes in the adhesion zone from either side are linked by the cohesive springs. The specific cases of a cell adhering to a homogeneous substrate and a heterogeneous bimaterial substrate are examined. The analyses show that the substrate stiffness affects the adhesion behavior significantly and regulates the direction of cell adhesion, in good agreement with the experimental results in the literature. By introducing a reactive parameter (i.e., cell-membrane stress) linking biological responses of a living cell to a mechanical environment, the present model offers a unified mechanistic vehicle for characterization and prediction of living cell responses to various kinds of mechanical stimuli including local extracellular matrix and neighboring cells.

Effects of compressive residual stress on the morphologic changes of fibroblasts

Recently, the term tensotaxis was proposed to describe the phenomenon that tensile stress or strain affects cell migration. Even so, less attention has been paid to the effects of compressive stress on cell behavior. In this study, by using an injection-molded method combined with photoelastic technology, we developed residual stress gradient-controlled poly-L-lactide discs. After culturing NIH-3T3 fibroblasts on the stress gradient substrate, the cell distributions for high- and low-stress regions were measured and compared. Our results showed that there were significantly more cells in the low-compressive stress region relative to their high-stress analogs (p < 0.05). In addition, NIH-3T3 fibroblasts in the low-compressive stress region expressed more abundant extensive filopodia. These findings provide greater insight into the interaction between cells and substrates, and could serve as a useful reference for connective tissue development and repair.

Thickness sensing of hMSCs on collagen gel directs stem cell fate

Mechanically compliant substrate provides crucial biomechanical cues for multipotent stem cells to regulate cellular fates such as differentiation, proliferation and maintenance of their phenotype. Effective modulus of which cells sense is not only determined by intrinsic mechanical properties of the substrate, but also the thickness of substrate. From our study, it was found that interference from underlying rigid support at hundreds of microns away could induce significant cellular response. Human mesenchymal stem cells (hMSCs) were cultured on compliant biological gel, collagen type I, of different thickness but identical ECM composition and local stiffness. The cells sensed the thin gel (130 μm) as having a higher effective modulus than the thick gel (1440 μm) and this was reflected in their changes in morphology, actin fibers structure, proliferation and tissue specific gene expression. Commitment into neuronal lineage was observed on the thin gel only. Conversely, the thick gel (1440 μm) was found to act like a substrate with lower effective modulus that inhibited actin fiber polymerization. Stem cells on the thick substrate did not express tissue specific genes and remained at their quiescent state. This study highlighted the need to consider not only the local modulus but also the thickness of biopolymer gel coating during modulation of cellular responses.

Vascular smooth muscle cell durotaxis depends on substrate stiffness gradient strength

Mechanical compliance is emerging as an important environmental cue that can influence certain cell behaviors, such as morphology and motility. Recent in vitro studies have shown that cells preferentially migrate from less stiff to more stiff substrates; however, much of this phenomenon, termed durotaxis, remains ill-defined. To address this problem, we studied the morphology and motility of vascular smooth muscle cells on well-defined stiffness gradients. Baselines for cell spreading, polarization, and random motility on uniform gels with moduli ranging from 5 to 80 kPa were found to increase with increasing stiffness. Subsequent analysis of the behavior of vascular smooth muscle cells on gradient substrata (0-4 kPa/100 mum, with absolute moduli of 1-80 kPa) demonstrated that the morphology on gradient gels correlated with the absolute modulus. In contrast, durotaxis (evaluated quantitatively as the tactic index for a biased persistent random walk) and cell orientation with respect to the gradient both increased with increasing magnitude of gradient, but were independent of the absolute modulus. These observations provide a foundation for establishing quantitative relationships between gradients in substrate stiffness and cell response. Moreover, these results reveal common features of phenomenological cell response to chemotactic and durotactic gradients, motivating further mechanistic studies of how cells integrate and respond to multiple complex signals.

Heterogeneous films of ionotropic hydrogels fabricated from delivery templates of patterned paper

The use of delivery templates makes it possible to fabricate shaped, millimeter-thick heterogeneously patterned films of ionotropic hydrogels. These structures include two-dimensional (2-D) patterns of a polymer cross-linked by different ions (e.g., alginic acid cross-linked with Ca2+ and Fe3+) and patterns of step gradients in the concentration of a single cross-linking ion. The delivery templates consist of stacked sheets of chromatography paper patterned with hydrophobic barriers (waterproof tape, transparency film, or toner deposited by a color laser printer). Each layer of paper serves as a reservoir for a different solution of cross-linking ions, while the hydrophobic barriers prevent solutions on adjacent sheets from mixing. Holes cut through the sheets expose different solutions of cross-linking ions to the surface of the templates. Films with shaped regions of hydrogels cross-linked by paramagnetic ions can be oriented with a bar magnet. Variations in the concentrations of cations used to cross-link the gel can control the mechanical properties of the film: for single alginate films composed of areas cross-linked with different concentrations of Fe3+, the regions cross-linked with high concentrations of Fe3+ are more rigid than regions cross-linked with low concentrations of Fe3+. The heterogeneous hydrogel films can be used to culture bacteria in various 2-D designs. The pattern of toxic and nontoxic ions used to cross-link the polymer determines the pattern of viable colonies of Escherichia coli within the film.

Fast fluorescence laser tracking microrheometry, II: quantitative studies of cytoskeletal mechanotransduction

Fluorescence laser tracking microrheometry (FLTM) is what we believe to be a novel method able to assess the local, frequency-dependent mechanical properties of living cells with nanometer spatial sensitivity at speeds up to 50 kHz. In an earlier article, we described the design, development, and optimization phases of the FLTM before reporting its performances in a variety of viscoelastic materials. In the work presented here, we demonstrate the suitability of FLTM to study local cellular rheology and obtain values for the storage and loss moduli G'(omega) and G''(omega) of fibroblasts consistent with past literature. We further establish that chemically induced cytoskeletal disruption is accompanied by reduced cellular stiffness and viscosity. Next, we provide a systematic study of some experimental variables that may critically influence microrheology measurements. First, we interrogate and justify the relevance of bead endocytosis as a method of cellular internalization of 1-microm probes in FLTM. Second, we show that as sample temperature increases, FLTM findings are elevated toward higher frequencies. Third, we confirm that relevant bead sizes (1 and 2 microm) have no effect on FLTM measurements. Fourth, we report the lack of influence of bead coatings (antiintegrin, antitransferrin, antidystroglycan, or uncoated tracers were surveyed) on their rheological readouts. Finally, we demonstrate the potential of FLTM in studying how substratum rigidity regulates cellular rheological properties. Interestingly, multiple, coupled strain relaxation mechanisms can be observed separated by two plateau moduli. Although these observations can be partly explained by rheological theories describing entangled actin filaments, there is a clear need to extend existing microrheology models to the cytoskeleton, including potentially important factors such as network geometry and remodeling.

Cytoskeletal mechanics in airway smooth muscle cells

Mechanical properties and contractility of airway smooth muscle tissue are largely responsible for airway narrowing and airway hyperresponsiveness in asthma. To explain these pathological phenomena, investigators have studied the mechanical behaviour of airway smooth muscle cells and its relationship to the underlying cellular biophysical and biochemical mechanisms. During the past decade, a growing body of evidence has indicated that a deformable intracellular polymer network, known as the cytoskeleton, plays a major role in transmitting and distributing mechanical forces within the cell and in their conversion into biochemical responses. We review here evidence suggesting that the tensed and crosslinked cytoskeletal lattice, the contractile apparatus, and the cytoskeleton-extracellular matrix interactions are key determinants of mechanical properties and mechanosensing of airway smooth muscle cells, with the mechanical distending stress of the cytoskeleton playing the central role.