Adsorption properties of HKUST-1 toward hydrogen and other small molecules monitored by IR

Impact of ligand fields on Kubas interaction of open copper sites in MOFs with hydrogen molecules: an electronic structural insight

We investigate hydrogen sorption on open copper sites in various ligand coordinations of metal-organic frameworks (MOFs), including the triangular T(CuL3) in MFU-4l, the linear L(CuL2) in NU2100, and the paddlewheel P(CuL4)2 in HKUST-1 from an electronic structure perspective using DFT calculations. The ligand-field-induced splitting of d states and spd hybridizations in copper are thoroughly examined. The hybridization between Cu s, p, and d orbitals occurs in various forms to optimize the Coulomb repulsion of different ligand fields. Despite the Cu+ oxidation state, which is typically conducive to strong Kubas interactions with hydrogen molecules, the vacant spd z 2 hybrid orbitals of the open copper site in the L(CuL2) coordination are unsuitable for facilitating electron forward donation, thereby preventing effective hydrogen adsorption. In contrast, the vacant spd z 2 hybrid orbitals in the T(CuL3) and P(CuL4)2 coordinations can engage in electron forward donations, forming bonding states between the Cu spd z 2 and H2 σ bonding orbitals. The forward donation in the T(CuL3) configuration is significantly stronger than in the P(CuL4)2 configuration due to both the lower energy of the vacant orbitals and the larger contributions of p and d z 2 characters to the hybrid orbital. Additionally, the occupied Cu pd xz/yz and pd x 2-y 2 hybrid orbitals in the T(CuL3) configuration promote electron back donation to the H2 σ* antibonding orbital, leading to the formation of π bonding states. In the P(CuL4)2 coordination, the repulsion from the electron density distributed over the surrounding ligands prevents the H2 molecule from approaching the copper center closely enough for the back donation to occur. The complete Kubas interaction, involving both forward and back electron donations, results in a large dihydrogen-copper binding energy of 37.6 kJ mol-1 in the T(CuL3) coordination. In contrast, the binding energy of 10.6 kJ mol-1 in the P(CuL4)2 coordination is primarily driven by electrostatic interactions with a minor contribution of the Kubas-like forward donation interaction. This analysis highlights the pivotal role of coordination environments in determining the hydrogen sorption properties of MOFs.

Precise Modulation of CO2 Sorption in Ti8Ce2-Oxo Clusters: Elucidating Lewis Acidity of the Ce Metal Sites and Structural Flexibility

Investigating the structure-property correlation in porous materials is a fundamental and consistent focus in various scientific domains, especially within sorption research. Metal oxide clusters with capping ligands, characterized by intrinsic cavities formed through specific solid-state packing, demonstrate significant potential as versatile platforms for sorption investigations due to their precisely tunable atomic structures and inherent long-range order. This study presents a series of Ti8Ce2-oxo clusters with subtle variations in coordinated linkers and explores their sorption behavior. Notably, Ti8Ce2-BA (BA denotes benzoic acid) manifests a distinctive two-step profile during the CO2 adsorption, accompanied by a hysteresis loop. This observation marks a new instance within the metal oxide cluster field. Of intrigue, the presence of unsaturated Ce(IV) sites was found to be correlated with the stepped sorption property. Moreover, the introduction of an electrophilic fluorine atom, positioned ortho or para to the benzoic acid, facilitated precise control over gate pressure and stepped sorption quantities. Advanced in situ techniques systematically unraveled the underlying mechanism behind this unique sorption behavior. The findings elucidate that robust Lewis base-acid interactions are established between the CO2 molecules and Ce ions, consequently altering the conformation of coordinated linkers. Conversely, the F atoms primarily contribute to gate pressure variation by influencing the Lewis acidity of the Ce sites. This research advances the understanding in fabricating metal-oxo clusters with structural flexibility and provides profound insights into their host-guest interaction motifs. These insights hold substantial promise across diverse fields and offer valuable guidance for future adsorbent designs grounded in fundamental theories of structure-property relationships.

Enabling a bioinspired N,N,N-copper coordination motif through spatial control in UiO-67: synthesis and reactivity

Metal-organic frameworks (MOFs) featuring zirconium-based clusters are widely used for the development of functionalized materials due to their exceptional stability. In this study, we report the synthesis of a novel N,N,N-ligand compatible with a biphenyl dicarboxylic acid-based MOF. However, the resulting copper(I) complex exhibited unexpected coordination behaviour, lacking the intended trifold coordination motif. Herein, we demonstrate the successful immobilization of a bioinspired ligand within the MOF, which preserved its crystalline and porous nature while generating a well-defined copper site. Comprehensive spectroscopic analyses, including X-ray absorption, UV/Vis, and infrared spectroscopy, were conducted to investigate the copper site and its thermal behaviour. The immobilized ligand exhibited the desired tridentate coordination to copper, providing access to a coordination motif otherwise unattainable. Notably, water molecules were also found to coordinate to copper. Upon heating, the copper centre within the MOF exhibited reversible dehydration, suggesting facile creation of open coordination sites. Furthermore, the copper site displayed reduction at elevated temperatures and subsequent susceptibility to oxidation by molecular oxygen. Lastly, both the molecular complexes and the MOF were evaluated as catalysts for the oxidation of cyclohexane using hydrogen peroxide. This work highlights the successful immobilization of a bioinspired ligand in a zirconium-based MOF, shedding light on the structural features, thermal behaviour, and catalytic potential of the resulting copper sites.

Mn/Ce@HKUST-1 for Efficient Removal of Gaseous Thallium: Insights from Kinetic and Experimental Studies

Gaseous thallium (Tl) pollution events, primarily caused by non-ferrous mineral refineries and fossil fuel combustion, have increased over the past few decades. To prevent gaseous Tl distribution from flue gas, MnO2/CeO2@HKUST-1 (MCH) was synthesized and found to achieve a gaseous Tl(I) removal level of up to 90% at 423 K, a weight hourly space velocity (WHSV) of 2000 h-1/mL with an Mn dose of 10%, maintained over 10 h. The best Mn/Ce ratio was found to be 9:1. To further investigate surface kinetic behavior, four commonly used kinetic models were applied, including the Eley-Rideal (ER) model, Langmuir-Hinshelwood (LH) model, Mars-van Krevelen (MVK) model, and pseudo-first-order (PFO) model. While the ER and LH models had the slightest deviation, the MVK model was the most reliable. The CatMAP software was also used to match the simulation deviation. This work demonstrated the Tl removal mechanism and provided insights into the accuracy of kinetic models on minor-radius heavy metal. Thus, this research may help promote the design of reactors, heavy metal removal rates, and flue gas purification technology selection.

Enhanced Gas Adsorption on Cu3(BTC)2 Metal-Organic Framework by Post-Synthetic Cation Exchange and Computational Analysis

Increased gas adsorption in a series of post-synthetically modified metal-organic frameworks (MOFs) of the type HKUST-1 was achieved by the partial cation exchange process. Manipulation of post-synthetic conditions demonstrates high tunability in the site substitution and gas adsorption properties during the dynamic equilibrium process. In this work, post-synthetic modification of Cu₃(BTC)₂ is carried on by exposure to TM²⁺ solutions (TM = Mn, Fe, Co, Ni) at different time intervals. The crystal structure, composition, and morphology were studied by powder X-ray diffraction, Fourier-transform infrared spectroscopy, inductively coupled plasma optical emission spectroscopy, and scanning electron microscopy. Structural analysis supports the retention of the crystal structure and partial substitution of the Cu metal nodes within the framework. A linear increase in the transmetalation process is observed with Fe and Co with a maximum percentage of 39 and 18%, respectively. Conversely, relatively low cation exchange is observed with Mn having a maximum percentage of 2.40% and Ni with only 2.02%. Gas adsorption measurements and surface area analysis were determined for each species. Interestingly, (Cu/Mn)₃(BTC)₂ revealed the highest CO₂ adsorption capacity of 5.47 mmol/g, compared to 3.08 mmol/g for Cu₃(BTC)₂. The overall increased gas adsorption can be attributed to the formation of defects in the crystal structure during the cation exchange process. These results demonstrate the outstanding potential of post-synthetic ion exchange as a general approach to fine-tuning the physical properties of existing MOF architectures.

Permanent Porosity in the Room-Temperature Magnet and Magnonic Material V(TCNE)2

Materials that simultaneously exhibit permanent porosity and high-temperature magnetic order could lead to advances in fundamental physics and numerous emerging technologies. Herein, we show that the archetypal molecule-based magnet and magnonic material V(TCNE)₂ (TCNE = tetracyanoethylene) can be desolvated to generate a room-temperature microporous magnet. The solution-phase reaction of V(CO)₆ with TCNE yields V(TCNE)₂·0.95CH₂Cl₂, for which a characteristic temperature of T* = 646 K is estimated from a Bloch fit to variable-temperature magnetization data. Removal of the solvent under reduced pressure affords the activated compound V(TCNE)₂, which exhibits a T* value of 590 K and permanent microporosity (Langmuir surface area of 850 m²/g). The porous structure of V(TCNE)₂ is accessible to the small gas molecules H₂, N₂, O₂, CO₂, ethane, and ethylene. While V(TCNE)₂ exhibits thermally activated electron transfer with O₂, all the other studied gases engage in physisorption. The T* value of V(TCNE)₂ is slightly modulated upon adsorption of H₂ (T* = 583 K) or CO₂ (T* = 596 K), while it decreases more significantly upon ethylene insertion (T* = 459 K). These results provide an initial demonstration of microporosity in a room-temperature magnet and highlight the possibility of further incorporation of small-molecule guests, potentially even molecular qubits, toward future applications.

Direct observation of highly effective hydrogen isotope separation at active metal sites by in situ DRIFT spectroscopy

In situ diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy was developed for the first time to observe the hydrogen isotope separation behavior at active Cu^I sites within Cu^I-MFU-4l, and clear evidence of the preferential adsorption of D₂ over H₂ was directly captured. More importantly, our results show direct spectral proof to clarify the chemical affinity quantum sieving mechanism of hydrogen isotope separation within porous adsorbents.

Biodiesel Production from Transesterification with Lipase from Pseudomonas cepacia Immobilized on Modified Structured Metal Organic Materials

This research presents the modification of MOF-199 and ZIF-8 using furfuryl alcohol (FA) as a carbon source to subsequently fix lipase from Pseudomonas cepacia and use these biocatalysts in the transesterification of African palm oil (APO). The need to overcome the disadvantages of free lipases in the biodiesel production process led to the use of metal organic framework (MOF)-type supports because they provide greater thermal stability and separation of the catalytic phase, thus improving the activity and efficiency in relation to the use of free lipase, disadvantages that could not be overcome with the use of other types of catalysts used in transesterification/esterification reactions for the production of biodiesel. The modification of MOFs ZIF-8 and MOF-199 with FA increases the pore volume which allows better immobilization of Pseudomonas cepacia lipase (PCL). The results show that these biocatalysts undergo transesterification with biodiesel yields above 90%. Additionally, studies were carried out on the effect of (1) enzyme loading, 2) enzyme immobilization time, (3) enzyme immobilization temperature, and (4) pH on the % immobilization of the enzyme and the specific activity. The results show that the highest immobilization efficiency for the FA@ZIF-8 support has a value of 91.2% when the load of this support was 3.5 mg/mg and has a specific activity of 142.5 U/g protein. The FA@MOF-199 support presented 80.3% enzyme immobilization and 125% U/g specific activity protein. We established that the specific activity increases in the period from 0.5 to 5.0 h for the systems under investigation. After this time, both the specific activity and the % efficiency of enzyme immobilization decrease. Therefore, 5.0 h (immobilization efficiency of 95 and 85% for FA@MOF-199, respectively) was chosen as the most appropriate time for PCL immobilization. Methods of adding methanol, with three and four steps, were tested, where biodiesel yields greater than 90% were obtained for the biocatalysts synthesized in this work (FA@ZIF-8-PCL and FA@MOF-199-PCL) and above 70% for free PCL, and the maximum yield was reached at a molar ratio between methanol and APO of 4:1 when using the one-step method under the same reaction conditions (as mentioned above). Only the results of FA@ZIF-8-PCL are presented here; however, it should be noted that the results for biocatalyst FA@MOF-199-PCL and lipase-free PCL presented the same behavior. The order of biocatalyst performance was FA@ZIF-8-PCL > FA@MOF-199-PCL > PCL-Free, which demonstrates that the use of FA as a modifier is a novel aspect in the conversion of palm oil into biodiesel components.

Survey on Adsorption of Low Molecular Weight Compounds in Cu-BTC Metal-Organic Framework: Experimental Results and Thermodynamic Modeling

This contribution aims at providing a critical overview of experimental results for the sorption of low molecular weight compounds in the Cu-BTC Metal-Organic Framework (MOF) and of their interpretation using available and new, specifically developed, theoretical approaches. First, a literature review of experimental results for the sorption of gases and vapors is presented, with particular focus on the results obtained from vibrational spectroscopy techniques. Then, an overview of theoretical models available in the literature is presented starting from semiempirical theoretical approaches suitable to interpret the adsorption thermodynamics of gases and vapors in Cu-BTC. A more detailed description is provided of a recently proposed Lattice Fluid approach, the Rigid Adsorbent Lattice Fluid (RALF) model. In addition, to deal with the cases where specific self- and cross-interactions (e.g., H-bonding, Lewis acid/Lewis base interactions) play a role, a modification of the RALF model, i.e., the RALFHB model, is introduced here for the first time. An extension of both RALF and RALFHB is also presented to cope with the cases in which the heterogeneity of the rigid adsorbent displaying a different kind of adsorbent cages is of relevance, as it occurs for the adsorption of some low molecular weight substances in Cu-BTC MOF.

Broadband Dielectric Spectroscopic Detection of Ethanol: A Side-by-Side Comparison of ZnO and HKUST-1 MOFs as Sensing Media

The most common gas sensors are based on chemically induced changes in electrical resistivity and necessarily involve making imperfect electrical contacts to the sensing materials, which introduce errors into the measurements. We leverage thermal- and chemical-induced changes in microwave propagation characteristics (i.e., S-parameters) to compare ZnO and surface-anchored metal–organic-framework (HKUST-1 MOF) thin films as sensing materials for detecting ethanol vapor, a typical volatile organic compound (VOC), at low temperatures. We show that the microwave propagation technique can detect ethanol at relatively low temperatures (<100 °C), and afford new mechanistic insights that are inaccessible with the traditional dc-resistance-based measurements. In addition, the metrological technique avoids the inimical measurand distortions due to parasitic electrical effects inherent in the conductometric volatile organic compound detection.

Enhanced Methylene Blue Adsorption by Cu-BTC Metal-Organic Frameworks with Engineered Particle Size Using Surfactant Modulators

Metal–organic frameworks (MOFs) featuring porous structures and large specific surface areas have shown great potential in removing organic pollutants from wastewater via adsorption processes. Although the particle size of MOFs determines the adsorption performance (something known as the size-dependent effect), engineering it into desirable dimensions for enhancing the adsorption performance is a great challenge. Here, we develop a practical and facile approach to regulate the particle size of copper benzene-1,3,5-tricarboxylate (Cu-BTC) adsorbents with high tunability by screening the functional modulator of various surfactants adding in hydrothermal synthesis procedure. The effect of surfactant type and concentration on the particle size of Cu-BTC was systematically investigated. The results show that the nonionic surfactant polyvinylpyrrolidone (PVP) demonstrated the greatest ability to control the particle size of Cu-BTC among other counterparts (e.g., N, N, N-trimethyl-1-dodecanaminium bromide (DTAB), polyethylene glycol (PEG1000), sodium dodecyl sulfate (SDS), sodium dodecyl benzene sulfonate (SDBS) and hexadecyl trimethyl ammonium bromide (CTAB)). By increasing the PVP concentration to 0.14 mmol L−1, the average particle size of Cu-BTC could be correspondingly reduced by more than ten times, reaching to a comparative smaller value of 2.4 μm as compared with the reported counterparts. In addition, the PVP allowed a large increase of the surface area of Cu-BTC according to porosity analysis, resulting in a great enhancement of methylene blue (MB) adsorption. The PVP-modulated Cu-BTC showed fast adsorption kinetics for MB removal accompanied with a maximum adsorption capacity of 169.2 mg g−1, which was considerably competitive with most of the analogs reported. Therefore, our study may inspire concepts for engineering the particle size of Cu-BTCs with improved properties for more practical applications.

High-Throughput Computational Exploration of MOFs with Open Cu Sites for Adsorptive Separation of Hydrogen Isotopes

Effective separation of hydrogen isotopes still remains one of the extremely challenging tasks in industry. Compared to the present methods that are energy- and cost-intensive, quantum sieving technology based on nanostructured materials offers a more efficient alternative approach, where metal-organic frameworks (MOFs) featuring open metal sites (OMS) can serve as an ideal platform. Herein, a combination of periodic density functional theory (DFT) with dispersive correction and high-throughput molecular simulation was employed from thermodynamic viewpoints to explore the D₂/H₂ separation properties of 929 experimental MOFs bearing a copper-paddlewheel unit. The DFT calculations showed that there is a negligible rotational energy barrier for the molecule adsorbed at the OMS, and the movement of the Cu atoms along the Cu-Cu axis vector almost has no influence on the interaction energy. On the basis of the DFT results, a new force field with a proposed cutoff scheme was developed to accurately describe the strong isotope-OMS interaction. Under practical conditions (40 K and 1.0 bar), large-scale computational material screening demonstrated that the OMS interaction plays a more important role in highly selective materials and ignoring such interactions can lead to completely wrong identification of the most promising materials. Using the adsorption selectivity and adsorbent performance score as evaluation metrics, this work demonstrated that the materials with sql topology notably outperform many benchmark adsorbents reported so far.

Taming structure and modulating carbon dioxide (CO2) adsorption isosteric heat of nickel-based metal organic framework (MOF-74(Ni)) for remarkable CO2 capture

Though the highest CO₂ capture capacity belongs to liquid amine-solutions, solid matters capable of CO₂ capture are also highly sought, providing that, they offer at least analogous CO₂ adsorption capacity and CO₂/N₂ selectivity. Herein, a surprisingly high-performance Ni-based metal-organic framework for CO₂ adsorption, namely MOF-74(Ni), was synthesized by a facile condensation reflux approach. It was found that the structure and CO₂ adsorption isosteric heat of MOF-74(Ni) could tune upon varying the synthesis duration under various temperatures. The optimized MOF-74(Ni)-24-140 (synthesized at 140 °C for 24 h) displays outstanding CO₂ adsorption capacity of 8.29/6.61 mmol/g at 273/298 K under normal pressure of 1.0 bar, several times higher than previously reported MOF-74-Ni (2.0/2.1 times), UTSA-16 (1.5/1.6 times), and DA-CMP-1 (3.6/4.9 times) under similar conditions. The excellent CO₂ capture capacity is associated to the abundant adsorption sites (mainly arising from the cationic Ni²⁺ ions) and narrow micropore channels (mainly arising from the cage structure of Ni²⁺ ions coordinated with organic linkers). Offering a high CO₂ selectivity (CO₂/N₂ = 49) and a well-tuned isosteric heat of CO₂ adsorption (27-52 kJ/mol) besides its decent CO₂ capture capacity, MOF-74(Ni) strongly stands out as an efficient and strong CO₂ capturing material with industrial scale applicability.

Understanding Solvothermal Growth of Metal-Organic Framework Colloids for CO2 Capture Applications

A quantitative study of the synthesis of metal-organic framework (MOF) colloids via a solvothermal growth process was demonstrated using electrospray-differential mobility analysis (ES-DMA), a gas-phase electrophoresis approach. HKUST-1, a copper-based MOF (Cu-MOF), was selected as the representative MOF of the study. The effects of the synthetic parameters, including ligand concentration (C_BTC), synthetic temperature (T_s), and synthetic time (t_s) versus material properties of the Cu-MOF, were successfully characterized based on the mobility size distributions measured by ES-DMA. The results show that the mobility size of Cu-MOF was proportional to T_s, t_s, and C_BTC during the solvothermal growth. X-ray diffraction and Brunauer-Emmett-Teller analyses were employed complementarily to the ES-DMA, confirming that the increase in mobility size of Cu-MOF was correlated to the increase in crystallinity (i.e., larger specific surface area and crystallite size). The results of CO₂ pulse adsorption show that the synthesized Cu-MOF possessed a good CO₂ adsorption ability under 1 atm, 35 °C, and the cumulative amount of CO₂ uptake was proportional to the measured mobility size of Cu-MOF. The work provides a proof of concept for the controlled synthesis of MOF colloids with the support of gas-phase electrophoretic analysis, and the quantitative methodology is useful for the development of MOF-based applications in CO₂ capture and utilization.

Metal-Organic Frameworks for NOx Adsorption and Their Applications in Separation, Sensing, Catalysis, and Biology

Nitrogen oxide (NO_x ) is a family of poisonous and highly reactive gases formed when fuel is burned at high temperatures during anthropogenic behavior. It is a strong oxidizing agent that significantly contributes to the ozone and smog in the atmosphere. Thus, NO_x removal is important for the ecological environment upon which the civilization depends. In recent decades, metal-organic frameworks (MOFs) have been regarded as ideal candidates to address these issues because they form a reticular structure between proper inorganic and organic constituents with ultrahigh porosity and high internal surface area. These characteristics render them chemically adaptable for NO_x adsorption, separation, sensing, and catalysis. In additional, MOFs enable potential nitric oxide (NO) delivery for the signaling of molecular NO in the human body. Herein, the different advantages of MOFs for coping with current environmental burdens and improving the habitable environment of humans on the basis of NO_x adsorption are reviewed.

Hybridization from Guest-Host Interactions Reduces the Thermal Conductivity of Metal-Organic Frameworks

We experimentally and theoretically investigate the thermal conductivity and mechanical properties of polycrystalline HKUST-1 metal-organic frameworks (MOFs) infiltrated with three guest molecules: tetracyanoquinodimethane (TCNQ), 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F₄-TCNQ), and (cyclohexane-1,4-diylidene)dimalononitrile (H₄-TCNQ). This allows for modification of the interaction strength between the guest and host, presenting an opportunity to study the fundamental atomic scale mechanisms of how guest molecules impact the thermal conductivity of large unit cell porous crystals. The thermal conductivities of the guest@MOF systems decrease significantly, by on average a factor of 4, for all infiltrated samples as compared to the uninfiltrated, pristine HKUST-1. This reduction in thermal conductivity goes in tandem with an increase in density of 38% and corresponding increase in heat capacity of ∼48%, defying conventional effective medium scaling of thermal properties of porous materials. We explore the origin of this reduction by experimentally investigating the guest molecules' effects on the mechanical properties of the MOF and performing atomistic simulations to elucidate the roles of the mass and bonding environments on thermal conductivity. The reduction in thermal conductivity can be ascribed to an increase in vibrational scattering introduced by extrinsic guest-MOF collisions as well as guest molecule-induced modifications to the intrinsic vibrational structure of the MOF in the form of hybridization of low frequency modes that is concomitant with an enhanced population of localized modes. The concentration of localized modes and resulting reduction in thermal conductivity do not seem to be significantly affected by the mass or bonding strength of the guest species.

Room temperature synthesis of a luminescent crystalline Cu-BTC coordination polymer and metal-organic framework

Synthesis of crystalline materials is elemental in the field of coordination chemistry towards optical applications. In the present work, coordination between copper and benzene-1,3,5-tricarboxylic acid (BTC) is controlled by adjusting the pH scale of the reaction mixture at room temperature to synthesize two crystalline structures: metal-organic framework HKUST-1 and coordination polymer Cu(BTC)·3H2O. The post-synthesis transformation of HKUST-1 into Cu(BTC)·3H2O is further demonstrated. Single crystals of both structures are studied by multi-laser Raman and luminescence spectroscopy. It is found that both crystals exhibit photoluminescence in the range of 700-900 cm-1 within the optical gap of the bulk materials, which can be associated with crystallographic defects. This work gives impetus for the synthesis of large metal-organic crystals based on which optical properties can be studied in depth.

Advanced strategies in Metal-Organic Frameworks for CO2 Capture and Separation

The continuous carbon dioxide (CO₂ ) gas emissions associated with fossil fuel production, valorization, and utilization are serious challenges to the global environment. Therefore, several developments of CO₂ capture, separation, transportation, storage, and valorization have been explored. Consequently, we documented a comprehensive review of the most advanced strategies adopted in metal-organic frameworks (MOFs) for CO₂ capture and separation. The enhancements in CO₂ capture and separation are generally achieved due to the chemistry of MOFs by controlling pore window, pore size, open-metal sites, acidity, chemical doping, post or pre-synthetic modifications. The chemistry of defects engineering, breathing in MOFs, functionalization in MOFs, hydrophobicity, and topology are the salient advanced strategies, recently reported in MOFs for CO₂ capture and separation. Therefore, this review summarizes MOF materials' advancement explaining different strategies and their role in the CO₂ mitigations. The study also provided useful insights into key areas for further investigations.

Catching the Reversible Formation and Reactivity of Surface Defective Sites in Metal-Organic Frameworks: An Operando Ambient Pressure-NEXAFS Investigation

In this work, we apply for the first time ambient pressure operando soft X-ray absorption spectroscopy (XAS) to investigate the location, structural properties, and reactivity of the defective sites present in the prototypical metal-organic framework HKUST-1. We obtained direct evidence that Cu⁺ defective sites form upon temperature treatment of the powdered form of HKUST-1 at 160 °C and that they are largely distributed on the material surface. Further, a thorough structural characterization of the Cu⁺/Cu²⁺ dimeric complexes arising from the temperature-induced dehydration/decarboxylation of the pristine Cu²⁺/Cu²⁺ paddlewheel units is reported. In addition to characterizing the surface defects, we demonstrate that CO₂ may be reversibly adsorbed and desorbed from the surface defective Cu⁺/Cu²⁺ sites. These findings show that ambient pressure soft-XAS, combined with state-of-the-art theoretical calculations, allowed us to shed light on the mechanism involving the decarboxylation of the paddlewheel units on the surface to yield Cu⁺/Cu²⁺ complexes and their reversible restoration upon exposure to gaseous CO_2.

Defect Engineering in Metal‒Organic Frameworks as Futuristic Options for Purification of Pollutants in an Aqueous Environment

Clean water scarcity is becoming an increasingly important worldwide issue. The water treatment industry is demanding the development of novel effective materials. Defect engineering in nanoparticles is among the most revolutionary of technologies. Because of their high surface area, structural diversity, and tailorable ability, Metal‒Organic Frameworks (MOFs) can be used for a variety of purposes including separation, storage, sensing, drug delivery, and many other issues. The application in wastewater treatment associated with water stable MOF‒based materials has been an emerging research topic in recent decades. Defect engineering is a sophisticated technique used to manufacture defects and to change the geometric framework of target compounds. Since MOFs have a series of designable structures and active sites, tailoring properties in MOFs by defect engineering is a novel concept. Defect engineering can excavate hidden active sites in MOFs, which can lead to better performance in many fields. Therefore, this technology will open new opportunities in water purification processes. However, there has been little effort to comprehensively discuss this topic. In this review, we provide an overview of the development of defect engineered MOFs for water purification processes. Furthermore, we discuss the potential applications of defect engineered materials.

Calcium-Based Metal-Organic Frameworks and Their Potential Applications

Metal-organic frameworks (MOFs) built on calcium metal (Ca-MOFs) represent a unique subclass of MOFs featuring high stability, low toxicity, and relatively low density. Ca-MOFs show considerable potential for molecular separations, electronic, magnetic, and biomedical applications, although they are not investigated as extensively as transition metal-based MOFs. Compared to MOFs made of other groups of metals, Ca-MOFs may be particularly advantageous for certain applications such as adsorption and storage of light molecules because of their gravimetric benefit, and drug delivery due to their high biocompatibility. This review intends to provide an overview on the recent development of Ca-MOFs, including their synthesis, crystal structures, important properties, and related applications. Various synthetic methods and techniques, types of building blocks, structure and porosity features, selected physical properties, and potential uses will be discussed and summarized. Representative examples will be illustrated for each type of important applications with a focus on their structure-property relations.

What Lies beneath a Metal-Organic Framework Crystal Structure? New Design Principles from Unexpected Behaviors

The rational design principles established for metal-organic frameworks (MOFs) allow clear structure-property relationships, fueling expansive growth for energy storage and conversion, catalysis, and beyond. However, these design principles are based on the assumption of compositional and structural rigidity, as measured crystallographically. Such idealization of MOF structures overlooks subtle chemical aspects that can lead to departures from structure-based chemical intuition. In this Perspective, we identify unexpected behavior of MOFs through literature examples. Based on this analysis, we conclude that departures from ideality are not uncommon. Whereas linker topology and metal coordination geometry are useful starting points for understanding MOF properties, we anticipate that deviations from the idealized crystal representation will be necessary to explain important and unexpected behaviors. Although this realization reinforces the notion that MOFs are highly complex materials, it should also stimulate a broader reexamination of the literature to identify corollaries to existing design rules and reveal new structure-property relationships.

HKUST-1 MOF in reline deep eutectic solvent: synthesis and phase transformation

The fate of HKUST-1 (Cu₃(BTC)₂, BTC = 1,3,5-benzenetricarboxylate) in the green Deep Eutectic Solvent (DES) reline (choline chloride/urea 1 : 2) was investigated, highlighting that not only reline can be used to make this MOF but also to transform it into another crystalline material. The synthesis of HKUST-1(reline) showing good textural properties and a particular rose morphology was indeed successfully achieved in this solvent. However, upon optimizing the reaction conditions such as concentration and metal/ligand ratio, it was found that another structure Cu₂(BTC)Cl also forms. It was unequivocally demonstrated that, upon heating in reline, HKUST-1 converts to the non-porous chloride-incorporating material. Hence, a novel feature of DES in MOF synthesis is uncovered: its role as a structure-directing agent, triggering the transformation between two different MOF structures.

Improved Catalytic Propylene Epoxidation for Extruded Micrometer TS-1: Introducing Mesopores and Macropores Insides the Crystals

In the paper, mesopores and macropores are introduced inside the crystals of micrometer microporous titanium silicate-1 (TS-1) to solve the problem of active site coverage and mass transfer during extrusion. Hierarchically porous titanium silicalite-1 (HPTS-1) was acquired by treating micrometer microporous TS-1 with TPABr and ethanolamine. Extruded HPTS-1 maintained greatly superior catalytic performance and possessed high mechanical strength. Characterization results showed that extruded HPTS-1 possessed macroporous, mesoporous structure inside the crystals. These abundant pores are not only beneficial for diffusion reactants, but also make Ti-peroxo species (η2), active oxidation sites in TS-1/H2O2 system become much more reactive. The formula of extruded HPTS-1 was optimized using an orthogonal experiment. The maximum strength of extruded HPTS-1 was up to 200 N/cm, the highest yield of propylene oxide was 92.5% and the specific rate was up to 41.9%. The research provides a scientific basis for producing extruded catalysts with excellent catalytic performance and high mechanical strength in industrial applications.

A semi-automatic solid phase extraction system based on MIL-101(Cr) foam-filled syringe for detection of triazines in vegetable oils

In this study, several metal-organic framework-melamine foam columns were first developed and used as a laboratory-made semi-automatic solid phase extraction packed in syringe adsorber for the extraction of six triazine herbicides from vegetable oil samples coupled to high-performance liquid chromatography-tandem mass spectrometry. The metal-organic framework-foam columns were prepared using a simple approach by embedding the solid particles in melamine foam using polyvinylidene difluoride physical encapsulation. The method was applicable to a wide variety of metal-organic framework materials, and the incorporated materials retained their unique properties. Key factors that affect the extraction efficiency, including the MIL-101(Cr) amount, sample flow rate, type and volume of the eluting solvent, and flow rate of eluting solvent, were investigated. Under optimum conditions, the proposed method exhibited low limits of detection (0.017-0.096 ng/mL, S/N = 3) for six triazines. The relative standard deviations calculated for all herbicides ranged from 0.2 to 14.9%. This study demonstrated that the MIL-101(Cr)-foam column can be used as a high-quality adsorption material for the detection of triazines in vegetable oils.

CO2 adsorption mechanisms on MOFs: a case study of open metal sites, ultra-microporosity and flexible framework

In this review the CO₂ adsorption mechanisms of MOF-74-Mg, HKUST-1, SIFSIX-3-M, and ZIF-8 are explored, highlighting their preferential adsorption sites, CO₂–MOF complex configuration, adsorption dynamics, bonding angle, and water stability.

Excellent humidity sensor based on ultrathin HKUST-1 nanosheets

An excellent humidity sensor based on ultrathin HKUST-1 nanosheets was developed and some insights for the morphology–activity relationship were provided.

Next-Generation Accurate, Transferable, and Polarizable Potentials for Material Simulations

PHAHST (potentials with high accuracy, high speed, and transferability) intermolecular potential energy functions have been developed from first principles for H₂, N₂, the noble gases, and a metal-organic material, HKUST-1. The potentials are designed from the outset to be transferable to heterogeneous environments including porous materials, interfaces, and material simulations. This is accomplished by theoretically justified choices for all functional forms, parameters, and mixing rules, including explicit polarization in every environment and fitting to high quality electronic structure calculations using methods that are tractable for real systems. The models have been validated in neat systems by comparison to second virial coefficients and bulk pressure-density isotherms. For inhomogeneous applications, our main target, comparisons are presented to previously published experimental studies on the metal-organic material HKUST-1 including adsorption, isosteric heats of adsorption, binding site locations, and binding site energies. A systematic prescription is provided for developing compatible potentials for additional small molecules and materials. The resulting models are recommended for use in complex heterogeneous simulations where existing potentials may be inadequate.

In situ Nanoscale Infrared Spectroscopy of Water Adsorption on Nanoislands of Surface-Anchored Metal-Organic Frameworks

Despite technological advancements, probing gas‐solid interfaces at the nanoscale is still a formidable challenge. New nano‐spectroscopic methods are needed to understand the guest–host interactions of functional materials during gas sorption, separation, and conversion. Herein, we introduce in situ Photoinduced Force Microscopy (PiFM) to evidence site‐specific interaction between Metal‐Organic Frameworks (MOFs) and water. To this end, we developed amphiphilic Surface‐anchored MOF (SURMOF) model systems using self‐assembly for the side‐by‐side hetero‐growth of nanodomains of hydrophilic HKUST‐1 and hydrophobic ZIF‐8. PiFM was used to probe local uptake kinetics and to show D₂O sorption isotherms on (defective) HKUST‐1 paddlewheels. By monitoring defect vibrations, we visualized in real‐time the saturation of existing defects and the creation of D₂O‐induced defects. This work shows the potential of in situ PiFM to unravel gas sorption mechanisms and map active sites on functional (MOF) materials.

Metal Halide Perovskite@Metal-Organic Framework Hybrids: Synthesis, Design, Properties, and Applications

Metal halide perovskites (MHPs) have excellent optoelectronic and photovoltaic applications because of their cost-effectiveness, tunable emission, high photoluminescence quantum yields, and excellent charge carrier properties. However, the potential applications of the entire MHP family are facing a major challenge arising from its weak resistance to moisture, polar solvents, temperature, and light exposure. A viable strategy to enhance the stability of MHPs could lie in their incorporation into a porous template. Metal-organic frameworks (MOFs) have outstanding properties, with a unique network of ordered/functional pores, which render them promising for functioning as such a template, accommodating a wide range of MHPs to the nanosized region, alongside minimizing particle aggregation and enhancing the stability of the entrapped species. This review highlights recent advances in design strategies, synthesis, characterization, and properties of various hybrids of MOFs with MHPs. Particular attention is paid to a critical review of the emergence of MHP@MOF for comprehensive studies of next-generation materials for various technological applications including sensors, photocatalysis, encryption/decryption, light-emitting diodes, and solar cells. Finally, by summarizing the state-of-the-art, some promising future applications of reported hybrids are proposed. Considering the inherent correlation and synergic functionalities of MHPs and MOFs, further advancement; new functional materials; and applications can be achieved through designing MHP@MOF hybrids.

The Interaction of Hydrogen with Iron Benzene-1,3,5-Tricarboxylate (Fe-BTC)

Inelastic neutron scattering (INS) spectroscopy is used to explore the 0–12,000 cm−1 range to characterise the interaction of H2 with iron benzene-1,3,5-tricarboxylate (Fe-BTC). Two peaks are observed in the low energy (<350 cm−1) region after exposure to H2. Measurements with hydrogen deuteride (HD) confirm that the peaks originate from H2. The most likely explanation is that there are two populations of H2 (HD) present. For both the H2- and the HD-loaded samples, the higher energy peak is close in energy to that of the pure isotopomer, so it is assigned to bulk-like H2/HD held in pores of the Fe-BTC. The lower energy peak is assigned to H2/HD interacting directly with the Fe ion exposed on dehydration. It was also possible to detect the H–H stretch in the same experiment; however, unfortunately, the instrumental resolution is insufficient to separate the stretch modes of the bound H2 (HD) and that in the pores.

In Situ Spectroscopy of Calcium Fluoride Anchored Metal-Organic Framework Thin Films during Gas Sorption

Surface‐mounted metal–organic frameworks (SURMOFs) show promising behavior for a manifold of applications. As MOF thin films are often unsuitable for conventional characterization techniques, understanding their advantageous properties over their bulk counterparts presents a great analytical challenge. In this work, we demonstrate that MOFs can be grown on calcium fluoride (CaF₂) windows after proper functionalization. As CaF₂ is optically (in the IR and UV/Vis range of the spectrum) transparent, this makes it possible to study SURMOFs using conventional spectroscopic tools typically used during catalysis or gas sorption. Hence, we have measured HKUST‐1 during the adsorption of CO and NO. We show that no copper oxide impurities are observed and also confirm that SURMOFs grown by a layer‐by‐layer (LbL) approach possess Cu⁺ species in paddlewheel confirmation, but 1.9 times less than in bulk HKUST‐1. The developed methodology paves the way for studying the interaction of any adsorbed gases with thin films, not limited to MOFs, low temperatures, or these specific probe molecules, pushing the boundaries of our current understanding of functional porous materials.

Defect Engineering of Copper Paddlewheel-Based Metal-Organic Frameworks of Type NOTT-100: Implementing Truncated Linkers and Its Effect on Catalytic Properties

A series of new defect-engineered metal-organic frameworks (DEMOFs) were synthesized by framework doping with truncated linkers employing the mixed-linker approach. Two tritopic defective (truncated) linkers, biphenyl-3,3',5-tricarboxylates (L_H) lacking a ligating group and 5-(5-carboxypyridin-3-yl)isophthalates (L_Py) bearing a weaker interacting ligator site, were integrated into the framework of Cu₂(BPTC) (NOTT-100, BPTC = biphenyl-3,3',5,5'-tetracarboxylates). Incorporating L_H into the framework mainly generates missing metal node defects, thereby obtaining dangling COOH groups in the framework. However, introducing L_Py forms more modified metal nodes featuring reduced and more accessible Cu sites. In comparison with the pristine NOTT-100, the defect-engineered NOTT-100 (DE-NOTT-100) samples show two unique features: (i) functional groups (the protonated carboxylate groups as the Brønsted acid sites or the pyridyl N atoms as the Lewis basic sites), which can act as second active sites, are incorporated into the MOF frameworks, and (ii) more modified paddlewheels, which provided extra coordinatively unsaturated sites, are generated. The cooperative functioning of the above characteristics enhances the catalytic performance of certain types of reactions. For a proof of concept, two exemplary reactions, namely, the cycloaddition of CO₂ with propylene oxide to propylene carbonate and the cyclopropanation of styrene, were carried out to evaluate the catalytic activities of those DE-NOTT-100 materials depending on the defect structure.

Adsorption Properties of Ce5(BDC)7.5(DMF)4 MOF

In this article we report on the spectroscopic and adsorptive studies done on Ce(III)-based MOF possessing, upon desolvation, open metal sites, and a discrete surface area. The Ce-based MOF was synthesized from terephthalic acid linker (H2BDC) and Ce3+ cations by the classical solvothermal method. Preliminary powder X-ray diffraction analysis showed that the obtained materials corresponded to the ones reported by other authors. Spectroscopic techniques, such as XAS and in situ FTIR with probe molecules were used. In situ FTIR spectroscopy confirmed the successful removal of DMF molecules within the pore system at temperatures above 250 °C. Moreover, the use of CO as a probe molecule evidenced the presence of a Ce3+ open metal sites. Detailed volumetric and calorimetric CO2 adsorption studies are also reported.

Trans Influence across a Metal-Metal Bond of a Paddle-Wheel Unit on Interaction with Gases in a Metal-Organic Framework

Metal-organic frameworks (MOFs) are known as promising adsorbent materials that can recognize gases specifically. In the frameworks, gases favor interacting with specific binding sites such as open metal sites (OMSs), which can consist of various metals and show characteristic adsorption properties. A recently reported framework possessing OMSs of rhodium paddle-wheel (Rh-PW) showed distinct adsorption properties between NO and CO. We investigated theoretically the reasons for stronger NO binding to the Rh-PW and different adsorption amounts between NO and CO using Rh-PW cluster models, as well as the frequently reported Cu-PW for comparison. We also analyzed the cases of CO₂ and N₂, which are often used to probe functions of MOFs. We observed an increase in binding energy of NO at the second adduction of NO. On the basis of energy decomposition analysis, we found that Rh-NO bond formation inducing a trans influence is important for the stronger binding than with CO. Furthermore, we proposed a reason for twice the adsorption amount of NO than CO. The results are consistent with experimental observations, giving us insight into design functions of MOFs by selecting metal species.

Scrutinizing the Pore Chemistry and the Importance of Cu(I) Defects in TCNQ-Loaded Cu3(BTC)2 by a Multitechnique Spectroscopic Approach

Host-guest interactions control the fundamental processes in porous materials for many applications such as gas storage and catalysis. The study of these processes, however, is not trivial, even if the material is crystalline. In particular, metal-organic frameworks (MOFs) represent a complex situation since guest molecules can interact with different parts of the organic linkers and the metal clusters and may alter the details of the pore structure and system properties. A prominent example is the so-called retrofitted MOF material TCNQ@Cu₃(BTC)₂ that has attracted a lot of attention due to its electronic properties induced by the host-guest interactions. Only recently, structural evidence has been presented for a bridging binding mode of TCNQ to two Cu paddlewheel units; however, many issues regarding the redox chemistry of Cu₃(BTC)₂ and TCNQ are currently unsolved. Herein, we report a powerful spectroscopic approach to study the host-guest chemistry of this material. Combining IR spectroscopy in the presence of CO and EPR spectroscopy, we found that the intrinsic Cu(I) defects of the host react with the guest, forming TCNQ radical anions. This chemistry has profound implications, in particular, with respect to the performance of TCNQ@Cu₃(BTC)₂ as an electronic conductor. A decreasing availability of open Cu(II) sites with increasing TCNQ loading proves the coordinative binding of TCNQ to the paddlewheel nodes, and a heterogeneous structure is formed with different TCNQ arrangements and pore environments at low TCNQ loadings. Finally, the combined use of spectroscopic characterization techniques has proven to be, in general, a powerful approach for studying the complex chemistry of host-guest materials.