A lithography-free method for directed colloidal crystal assembly based on wrinkling

Self-Assembly of Strain-Adaptable Surface-Enhanced Raman Scattering Substrate on Polydimethylsiloxane Nanowrinkles

Flexible surface-enhanced Raman scattering (SERS) substrates adaptable to strains enable effective sampling from irregular surfaces, but the preparation of highly stable and sensitive flexible SERS substrates is still challenging. This paper reports a method to fabricate a high-performance strain-adaptable SERS substrate by self-assembly of Au nanoparticles (AuNPs) on polydimethylsiloxane (PDMS) nanowrinkles. Nanowrinkles are created on prestrained PDMS slabs by plasma-induced oxidation followed by the release of the prestrain, and self-assembled AuNPs are transferred onto the nanowrinkles to construct the high-performance SERS substrate. The results show that the nanowrinkled structure can improve the surface roughness and enhance the SERS signals by ∼4 times compared to that of the SERS substrate prepared on flat PDMS substrates. The proposed SERS substrate also shows good adaptability to dynamic bending up to ∼|0.4| 1/cm with excellent testing reproducibility. Phenolic pollutants, including aniline and catechol, were quantitatively tested by the SERS substrate. The self-assembled flexible SERS substrate proposed here provides a powerful tool for chemical analysis in the fields of environmental monitoring and food safety inspection.

Fabrication of Self-Wrinkling Polymer Films with Tunable Patterns through an Interfacial-Fuming-Induced Surface Instability Process

Inspired by the superglue fuming method for fingerprint collection, this study developed a novel interfacial-fuming-induced surface instability process to generate wrinkled patterns on polymeric substrates. High-electronegativity groups are introduced on the substrate surface to initiate the polymerization of monomer vapors, such as ethyl cyanoacrylate, which results in the formation of a stiff poly(ethyl cyanoacrylate) capping layer. Moreover, interfacial polymerization resulted in the covalent bonding of the substrate, which led to the volumetric shrinkage of the composite and the accumulation of compressive strain. This process ultimately resulted in the development and stabilization of wrinkled surface morphologies. The authors systematically examined parameters such as the modulus of the epoxy substrate, prestrain, the flow rate of fuming, and operating temperature. The aforementioned technique can be easily applied to architectures with complex outer morphologies and inner surfaces, thereby enabling the construction of surface patterns under ambient conditions without vacuum limitations or precise process control. This study is the first to combine fuming-induced interfacial polymerization with surface instability to create robust wrinkles. The proposed method enables the fabrication of intricate microwrinkled patterns and has considerable potential for use in various practical applications, including microfluidics, optical components, bioinspired adhesive devices, and interfacial engineering.

3D Temperature-Controlled Interchangeable Pattern for Size-Selective Nanoparticle Capture

Patterned surfaces with distinct regularity and structured arrangements have attracted great interest due to their extensive promising applications. Although colloidal patterning has conventionally been used to create such surfaces, herein, we introduce a novel 3D patterned poly(N-isopropylacrylamide) (PNIPAM) surface, synthesized by using a combination of colloidal templating and surface-initiated photoinduced electron transfer-reversible addition-fragmentation chain transfer (SI-PET-RAFT) polymerization. In order to investigate the temperature-driven 3D morphological variations at a lower critical solution temperature (LCST) of ∼32 °C, multifaceted characterization techniques were employed. Atomic force microscopy confirmed the morphological transformations at 20 and 40 °C, while water contact angle measurements, upon heating, revealed distinct trends, offering insights into the correlation between surface wettability and topography adaptations. Moreover, quartz crystal microbalance with dissipation monitoring and electrochemical measurements were employed to detect the topographical adjustments of the unique hollow capsule structure within the LCST. Tests using different sizes of PSNPs shed light on the size-selective capture-release potential of the patterned PNIPAM, accentuating its biomimetic open-close behavior. Notably, our approach negates the necessity for expensive proteins, harnessing temperature adjustments to facilitate the noninvasive and efficient reversible capture and release of nanostructures. This advancement hopes to pave the way for future innovative cellular analysis platforms.

Nanoparticle Assembly: From Self-Organization to Controlled Micropatterning for Enhanced Functionalities

Nanoparticles form long-range micropatterns via self-assembly or directed self-assembly with superior mechanical, electrical, optical, magnetic, chemical, and other functional properties for broad applications, such as structural supports, thermal exchangers, optoelectronics, microelectronics, and robotics. The precisely defined particle assembly at the nanoscale with simultaneously scalable patterning at the microscale is indispensable for enabling functionality and improving the performance of devices. This article provides a comprehensive review of nanoparticle assembly formed primarily via the balance of forces at the nanoscale (e.g., van der Waals, colloidal, capillary, convection, and chemical forces) and nanoparticle-template interactions (e.g., physical confinement, chemical functionalization, additive layer-upon-layer). The review commences with a general overview of nanoparticle self-assembly, with the state-of-the-art literature review and motivation. It subsequently reviews the recent progress in nanoparticle assembly without the presence of surface templates. Manufacturing techniques for surface template fabrication and their influence on nanoparticle assembly efficiency and effectiveness are then explored. The primary focus is the spatial organization and orientational preference of nanoparticles on non-templated and pre-templated surfaces in a controlled manner. Moreover, the article discusses broad applications of micropatterned surfaces, encompassing various fields. Finally, the review concludes with a summary of manufacturing methods, their limitations, and future trends in nanoparticle assembly.

Morphological Diagram of Dynamic-Interfacial-Release-Induced Surface Instability

In this study, a morphological diagram was constructed for quantitatively predicting various modes of surface instabilities caused by the dynamic interfacial release of strain in initially flat bilayer composites comprising an elastomer and a capping layer. Theory, experiment, and simulation were combined to produce the diagram, which enables systematic generation of the following instability patterns: wrinkle, fold, period-double, delamination, and coexisting patterns. The pattern that forms is most strongly affected by three experimental parameters: the elastic modulus of the elastomer, the elastic modulus of the capping layer, and the thickness of the capping layer. The morphological diagram offers understanding of the formation of complex patterns and development of their applications. Critically, the wrinkle alignment can be well controlled by changing the direction of the interfacial release to enable the creation of centimeter-sized and highly ordered lamellar wrinkled patterns with a single orientation on a soft elastomer without the need for costly high-vacuum instruments or complex fabrication processes. The method and diagram have great potential for broad use in many practical applications ranging from flexible electronic devices to smart windows.

Wrinkled Interfaces: Taking Advantage of Anisotropic Wrinkling to Periodically Pattern Polymer Surfaces

Periodically patterned surfaces can cause special surface properties and are employed as functional building blocks in many devices, yet remaining challenges in fabrication. Advancements in fabricating structured polymer surfaces for obtaining periodic patterns are accomplished by adopting "top-down" strategies based on self-assembly or physico-chemical growth of atoms, molecules, or particles or "bottom-up" strategies ranging from traditional micromolding (embossing) or micro/nanoimprinting to novel laser-induced periodic surface structure, soft lithography, or direct laser interference patterning among others. Thus, technological advances directly promote higher resolution capabilities. Contrasted with the above techniques requiring highly sophisticated tools, surface instabilities taking advantage of the intrinsic properties of polymers induce surface wrinkling in order to fabricate periodically oriented wrinkled patterns. Such abundant and elaborate patterns are obtained as a result of self-organizing processes that are rather difficult if not impossible to fabricate through conventional patterning techniques. Focusing on oriented wrinkles, this review thoroughly describes the formation mechanisms and fabrication approaches for oriented wrinkles, as well as their fine-tuning in the wavelength, amplitude, and orientation control. Finally, the major applications in which oriented wrinkled interfaces are already in use or may be prospective in the near future are overviewed.

1D Colloidal chains: recent progress from formation to emergent properties and applications

Integrating nanoscale building blocks of low dimensionality (0D; i.e., spheres) into higher dimensional structures endows them and their corresponding materials with emergent properties non-existent or only weakly existent in the individual building blocks. Constructing 1D chains, 2D arrays and 3D superlattices using nanoparticles and colloids therefore continues to be one of the grand goals in colloid and nanomaterial science. Amongst these higher order structures, 1D colloidal chains are of particular interest, as they possess unique anisotropic properties. In recent years, the most relevant advances in 1D colloidal chain research have been made in novel synthetic methodologies and applications. In this review, we first address a comprehensive description of the research progress concerning various synthetic strategies developed to construct 1D colloidal chains. Following this, we highlight the amplified and emergent properties of the resulting materials, originating from the assembly of the individual building blocks and their collective behavior, and discuss relevant applications in advanced materials. In the discussion of synthetic strategies, properties, and applications, particular attention will be paid to overarching concepts, fresh trends, and potential areas of future research. We believe that this comprehensive review will be a driver to guide the interdisciplinary field of 1D colloidal chains, where nanomaterial synthesis, self-assembly, physical property studies, and material applications meet, to a higher level, and open up new research opportunities at the interface of classical disciplines.

Controlling disorder in self-assembled colloidal monolayers via evaporative processes

Monolayers of assembled nano-objects with a controlled degree of disorder hold interest in many optical applications, including photovoltaics, light emission, sensing, and structural coloration. Controlled disorder can be achieved through either top-down or bottom-up approaches, but the latter is more suited to large-scale, low-cost fabrication. Disordered colloidal monolayers can be assembled through evaporatively driven convective assembly, a bottom-up process with a wide range of parameters impacting particle placement. Motivated by the photonic applications of such monolayers, in this review we discuss the quantification of monolayer disorder, and the assembly methods that have been used to produce them. We review the impact of particle and solvent properties, as well as the use of substrate patterning, to create the desired spatial distributions of particles.

Multifunctional Structured Platforms: From Patterning of Polymer-Based Films to Their Subsequent Filling with Various Nanomaterials

There is an astonishing number of optoelectronic, photonic, biological, sensing, or storage media devices, just to name a few, that rely on a variety of extraordinary periodic surface relief miniaturized patterns fabricated on polymer-covered rigid or flexible substrates. Even more extraordinary is that these surface relief patterns can be further filled, in a more or less ordered fashion, with various functional nanomaterials and thus can lead to the realization of more complex structured architectures. These architectures can serve as multifunctional platforms for the design and the development of a multitude of novel, better performing nanotechnological applications. In this work, we aim to provide an extensive overview on how multifunctional structured platforms can be fabricated by outlining not only the main polymer patterning methodologies but also by emphasizing various deposition methods that can guide different structures of functional nanomaterials into periodic surface relief patterns. Our aim is to provide the readers with a toolbox of the most suitable patterning and deposition methodologies that could be easily identified and further combined when the fabrication of novel structured platforms exhibiting interesting properties is targeted.

Breaking the symmetry of nanosphere lithography with anisotropic plasma etching induced by temperature gradients

We report a novel anisotropic process, termed plasma etching induced by temperature gradients (PE-TG), which we use to modify the 3D morphology of a hexagonally close-packed polystyrene sphere array. Specifically, we combined an isotropic oxygen plasma (generated by a plasma cleaner) and a vertical temperature gradient applied from the bottom to the top of a colloidal mask to create an anisotropic etching process. As a result, an ordered array of well-defined and separated nano mushrooms is obtained. We demonstrate that the features of the mushrooms, namely the hat size and their intrinsic undercut, as well as the pillar diameter and height, can be easily tuned by adjusting the main parameters of the process i.e. the temperature gradient and etching time, or the spheres' size. We show that PS mushroom arrays can be used as nanostructured templates to fabricate plasmonic arrays, such as gold-capped nano mushrooms and ultra-small nanoapertures, by using vertical and oblique gold sputtering deposition respectively. PE-TG reveals a new, cheap and facile approach to produce plasmonic nanostructures of great interest in the fields of molecular sensing, surface-enhanced Raman scattering (SERS), energy harvesting and optoelectronics. We study the optical properties of the Au-capped nano mushroom arrays and their performance as biosensing platforms by performing SERS measurements.

Prospects of Coupled Organic-Inorganic Nanostructures for Charge and Energy Transfer Applications

We review the field of organic-inorganic nanocomposites with a focus on materials that exhibit a significant degree of electronic coupling across the hybrid interface. These nanocomposites undergo a variety of charge and energy transfer processes, enabling optoelectronic applications in devices which exploit singlet fission, triplet energy harvesting, photon upconversion or hot charge carrier transfer. We discuss the physical chemistry of the most common organic and inorganic components. Based on those we derive synthesis and assembly strategies and design criteria on material and device level with a focus on photovoltaics, spin memories or optical upconverters. We conclude that future research in the field should be directed towards an improved understanding of the binding motif and molecular orientation at the hybrid interface.

Symmetrical Wrinkles in Single-Component Elastomers with Fingerprint-Inspired Robust Isotropic Dry Adhesive Capabilities

Robust and inexpensive dry adhesives have a great potential in multitudinous industrial applications. However, to date, the fabrication of dry adhesives, prepared using high aspect ratio structures in general, requires specific equipment and time-consuming processes, which limit their practicable utilization. Inspired from human fingerprints, in this study, we created durable single-component elastomer surfaces with symmetric and multiple concentric-shaped wrinkled patterns that exhibit isotropic dry adhesion capabilities. The dynamic interfacial release-induced surface wrinkling property of a rigid degradable polymeric capping layer [i.e., poly(l-lactide) (PLLA)] was exploited on a soft elastomer substrate [i.e., polydimethylsiloxane (PDMS)] to spontaneously form wrinkled PLLA/PDMS bilayer composites. After conducting a two-step thermal curing process on the composite and hydrolysis of the PLLA capping layer, a single-component microwrinkled PDMS surface with a large area and symmetric patterns could be generated. The patterns show flexible, durable, and isotropic dry adhesion capabilities that could be controlled by tuning their geometrical parameters (wrinkle wavelengths and amplitudes) and elastic modulus. In particular, the formation of symmetrically wrinkled patterns without using expensive lithography for patterning and costly material precursors is an advantage and could be extended to other industrial applications, such as damage-free transportation, biomimetic climbing robots, and biocompatible medical patches.

Path-Guided Hierarchical Surface Relief Gratings on Azo-Films Induced by Polarized Light Illumination through Surface-Wrinkling Phase Mask

Surface relief gratings (SRGs) with hierarchical microstructures are highly needed owing to their diverse applications in various fields. Here, we introduce surface-wrinkling templates as novel nonlithographic phase masks to direct the generation of hierarchical well-prescribed SRGs on nonconformally contacted azo-films by a simple single-beam illumination. The light-induced SRGs have controlled microstructures including single/double/triple wavelengths and single/double orientations as well as their organizations. These microstructures can be well tailored by the wavelength of the surface-wrinkling phase masks and the polarization direction of incident light relative to the wrinkling patterns in the phase masks. Interestingly, we find that the larger wavelength is induced prior to the smaller ones, offering another new strategy to tailor the microstructures of SRGs through simple manipulation of the illumination duration. In particular, path-guided SRGs with unprecedented well-organized hierarchical microstructures have been available in the case of controlled moving of the light illumination through the surface-wrinkling phase mask. As demonstrated, the obtained hierarchical SRGs with the capability of multiple optical inscription/erasure have great application potentials in fields such as confidential information (or pattern) records and encryption/decryption.

Effect of surface interactions on the settlement of particles on a sinusoidally corrugated substrate

Naturally-occurring surface topographies abound in nature and endow diverse properties, i.e., superhydrophobicity, adhesion, anti-fouling, self-cleaning, anti-glare, anti-bacterial, and many others. Researchers have attempted to replicate such topographies to create human-made surfaces with desired functionalities. For example, combining the surface topography with judicial chemical composition could provide an effective, non-toxic solution to combat non-specific biofouling. A systematic look at the effect of geometry, modulus, and chemistry on adhesion is warranted. In this work, we use a model system that comprises silica (SiO x ) beads interacting with a substrate made of a commercial polydimethylsiloxane kit (PDMS, Sylgard 184) featuring a sinusoidal topography. To examine the impact of interactions on particle settlement, we functionalize the surfaces of both the PDMS substrate and the SiO x beads with polyacrylic acid (PAA) and polyethyleneimine (PEI), respectively. We also use the PDMS commercial kit coated with liquid glass (LG) to study the effect of the substrate modulus on particle settlement. Substrates with a higher aspect ratio (i.e., amplitude/periodicity) encourage adsorption of particles along the sides of the channel compared with substrates with lower aspect ratio. We employ colloidal probe microscopy to demonstrate the effect of interaction between the substrate and the particle. The interplay among the surface modulus, geometry, and interactions between the surface and the particle governs particle settlement on sinusoidally-corrugated substrates.

Dynamics of wrinkling in ultrathin elastic sheets

The wrinkling of thin elastic objects provides a means of generating regular patterning at small scales in applications ranging from photovoltaics to microfluidic devices. Static wrinkle patterns are known to be governed by an energetic balance between the object's bending stiffness and an effective substrate stiffness, which may originate from a true substrate stiffness or from tension and curvature along the wrinkles. Here, we investigate dynamic wrinkling induced by the impact of a solid sphere onto an ultrathin polymer sheet floating on water. The vertical deflection of the sheet's center induced by impact draws material radially inward, resulting in an azimuthal compression that is relieved by the wrinkling of the entire sheet. We show that this wrinkling is truly dynamic, exhibiting features that are qualitatively different to those seen in quasistatic wrinkling experiments. Moreover, we show that the wrinkles coarsen dynamically because of the inhibiting effect of the fluid inertia. This dynamic coarsening can be understood heuristically as the result of a dynamic stiffness, which dominates the static stiffnesses reported thus far, and allows control of wrinkle wavelength.

Macroscopic Geometry-Dominated Orientation of Symmetric Microwrinkle Patterns

Orientated wrinkle patterns with controlled microarchitectures are highly attractive because of their potential and broad application in technologies ranging from flexible electronic devices to smart windows. Here, we demonstrate a macroscopic, geometry-dominated strategy to fabricate symmetric microwrinkles with precisely controllable pattern dimensions and orientations through a dynamic interfacial release process. The release-induced approach is based on the release of multilayer elastomer composites from polymeric sacrificial layers in solutions combined with crosslinking-induced contraction of the elastomer substrates. Crosslinking-induced contraction provides the driving force for developing and stabilizing surface wrinkle formation, whereas the polymeric sacrificial layer provides a mild and simultaneous release process to form orientated wrinkles through kinetic control of local strain development. The macroscopic shape of the composite controls release kinetics, hence strain history, leading to the generation of photonic reflective surfaces. Moreover, stable wrinkles fabricated from various materials including metals, ceramics, and carbons can be achieved. This versatile, mold-free, and cost-effective platform technology demonstrates how global strain distributions can be harnessed through kinetics to drive local pattern development.

Tackling the Scalability Challenge in Plasmonics by Wrinkle-Assisted Colloidal Self-Assembly

Electromagnetic radiation of a certain frequency can excite the collective oscillation of the free electrons in metallic nanostructures using localized surface plasmon resonances (LSPRs), and this phenomenon can be used for a variety of optical and electronic functionalities. However, nanostructure design over a large area using controlled LSPR features is challenging and requires high accuracy. In this article, we offer an overview of the efforts made by our group to implement a wrinkle-assisted colloidal particle assembly method to approach this challenge from a different angle. First, we introduce the controlled wrinkling process and discuss the underlying theoretical framework. We then set out how the wrinkled surfaces are utilized to guide the self-assembly of colloidal nanoparticles of various surface chemistry, size, and shape. Subsequently, template-assisted colloidal self-assembly mechanisms and a general guide for particle assembly beyond plasmonics will be presented. In addition, we also discuss the collective plasmonic behavior in depth, including strong plasmonic coupling due to nanoscale gap size as well as magnetic mode excitation and demonstrate the potential applications of wrinkle-assisted colloidal particle assembly method in the field of mechanoresponsive metasurfaces and surface-enhanced spectroscopy. Lastly, a general perspective in the field of template-assisted colloidal assembly with regard to potential applications in plasmonic photocatalysis, solar cells, optoelectronics, and sensing devices is provided.

Formation of aligned periodic patterns during the crystallization of organic semiconductor thin films

Self-organizing patterns with micrometre-scale features are promising for the large-area fabrication of photonic devices and scattering layers in optoelectronics. Pattern formation would ideally occur in the active semiconductor to avoid the need for further processing steps. Here, we report an approach to form periodic patterns in single layers of organic semiconductors by a simple annealing process. When heated, a crystallization front propagates across the film, producing a sinusoidal surface structure with wavelengths comparable to that of near-infrared light. These surface features initially form in the amorphous region within a micrometre of the crystal growth front, probably due to competition between crystal growth and surface mass transport. The pattern wavelength can be tuned from 800 nm to 2,400 nm by varying the film thickness and annealing temperature, and millimetre-scale domain sizes are obtained. This phenomenon could be exploited for the self-assembly of microstructured organic optoelectronic devices.

Enhancing Printing Resolution on Hydrophobic Polymer Surfaces Using Patterned Coatings of Cellulose Nanocrystals

High-resolution inkjet printing of a hydrophobic polymer surface (polystyrene, PS) was accomplished using a patterned coating of cellulose nanocrystals (CNCs) that prevents the ink from bleeding. A periodically crack-free, wrinkled (wavelength of around 850 nm) stamp was prepared by surface oxidation of an uniaxially stretched poly(dimethylsiloxane) elastomeric substrate and was used as a template to transfer aligned patterns of cellulose nanocrystals (CNCs) onto PS surfaces by wet stamping. The morphology of the aligned CNC coatings on PS was then compared with randomly deposited CNCs on PS using atomic force microscopy. The wettability of the CNCs and polymer surfaces with water and ink was measured and analyzed in the context of inkjet printing. This biomaterial coating technique enables high-resolution printing of modern water-based inks onto hydrophobic surfaces for applications in renewable packaging and printing of biomolecules for high throughput diagnostics. Further, with suitable modifications, the technology is scalable to roll-to-roll manufacturing for industrial flexo printing.

Confinement templates for hierarchical nanoparticle alignment prepared by azobenzene-based surface relief gratings

Alignment of nanoparticles to hierarchical periodic structures is an emerging field in the development of patterned surfaces. Common alignment methods are based on templates that guide particle self-assembly. These can be formed using lithographic methods offering an almost free choice of the motif, while being expensive and time-consuming for large-scale production. Alternatively, template formation by controlled wrinkling offers a low-cost formation, but often suffers from the formation of defect structures like line-defects and cracks. Here, we show a preparation technique for nanoparticle alignment substrates that is based on the inscription of holographic surface relief gratings with a periodic sinusoidal wave pattern on the surface of azobenzene films. As interference patterns are employed for structure formation, very uniform and defect-free gratings with tunable grating height and grating period can be prepared. These substrates were successfully replicated to poly(dimethyl siloxane) and the replicas used for the alignment of polystyrene latex particles. Accordingly produced substrates exhibiting gratings with a variation in grating height allow for efficient screening of nanoparticle alignment in a geometrical confinement in one single experiment. We anticipate our studies as a promising tool for the development of sensors, tunable gratings and metamaterials.

Enhancing the Photoelectrochemical Response of DNA Biosensors Using Wrinkled Interfaces

Photoelectrochemical (PEC) biosensors, with optical biasing and electrochemical readout, are expected to enhance the limit-of-detection of electrochemical biosensors by lowering their background signals. However, when PEC transducers are functionalized with biorecognition layers, their current significantly decreases, which reduces their signal-to-noise ratio and dynamic range. Here, we develop and investigate a wrinkled conductive scaffold for loading photoactive quantum dots into an electrode. The wrinkled photoelectrodes demonstrate an order of magnitude enhancement in the magnitude of the transduced PEC current compared to their planar counterparts. We engineer PEC biosensors by functionalizing the wrinkled photoelectrodes with nucleic acid capture probes. We challenge the sensitivity of the wrinkled and planar biosensors with various concentrations of DNA target and observe a 200 times enhancement in the limit-of-detection for wrinkled versus planar electrodes. In addition to enhanced sensitivity, the wrinkled PEC biosensors are capable of distinguishing between fully complementary and targets with a single base-pair mismatch, demonstrating the suitability of these biosensors for use in clinical diagnostics.

Amphiphile-Induced Anisotropic Colloidal Self-Assembly

Spherical colloidal particles typically self-assemble into hexagonal lattices when adsorbed at liquid interfaces. More complex assembly structures, including particle chains and phases with square symmetry, were theoretically predicted almost two decades ago for spherical particles interacting via a soft repulsive shoulder. Here, we demonstrate that such complex assembly phases can be experimentally realized with spherical colloidal particles assembled at the air/water interface in the presence of molecular amphiphiles. We investigate the interfacial behavior of colloidal particles in the presence of different amphiphiles on a Langmuir trough. We transfer the structures formed at the interface onto a solid substrate while continuously compressing, which enables us to correlate the prevailing assembly phase as a function of the available interfacial area. We observe that block copolymers with similarities to the chemical nature of the colloidal particles, as well as the surface-active protein bovine serum albumin, direct the colloidal particles into complex assembly phases, including chains and square arrangements. The observed structures are reproduced by minimum energy calculations of hard core-soft shoulder particles with experimentally realistic interaction parameters. From the agreement between experiments and theory, we hypothesize that the presence of the amphiphiles manipulates the interaction potential of the colloidal particles. The assembly of spherical colloidal particles into complex assembly phases on solid substrates opens new possibilities for surface patterning by enriching the library of possible structures available for colloidal lithography.

Decreasing the Wettability of Cellulose Nanocrystal Surfaces Using Wrinkle-Based Alignment

Cellulose nanocrystals (CNCs) are a particularly appealing format of the natural biopolymer due to their exceptional strength, nanoscale dimensions, and needle-like shape anisotropy. However, CNCs are hydrophilic and hence their wettability makes them impractical for many coating applications, with various approaches using chemical functionalization to overcome this. Here we show that CNC-coated surfaces can be rendered hydrophobic by alignment of the native CNCs using a wrinkled template-mediated printing process. We present a novel and simple method allowing full release of the CNCs from the template and their permanent adsorption into fine patterns onto the surface, thus preventing CNC repositioning during wetting. The aligned CNCs induce strong pinning effects that capture and retain water droplets with high contact angle and large roll-off angles, without becoming susceptible to oil contamination. The fabrication process for these coatings could be achieved by large-scale printing, making them a practical and cost-effective solution to hydrophobic coatings from raw cellulosic materials.

Template-Free Assembly in Living Bacterial Suspension under an External Electric Field

Although template-assisted self-assembly methods are very popular in materials and biological systems, they have certain limitations such as lack of tunability and switchable functionality because of the irreversible association of cells and their matrix components. With an aim to achieve more tunability, we have made an attempt to investigate the self-assembly behavior of rod-shaped living bacteria subjected to an external alternating electric field using confocal microscopy. We demonstrate that rod-shaped living bacteria dispersed in a low salinity aqueous medium form different types of reversible freely suspended structures when subjected to an external alternating electric field. At low field strength, an oriented phase is observed where individual bacterium orients with its major axis aligned along the field direction. At intermediate field strength, bacteria align in the form of one-dimensional (1D) chains that lie along the field direction. Further, at high field strength, more bacteria associate with these 1D chains laterally to form a two-dimensional (2D) array. At higher bacterial concentration, these field-induced 2D arrays extend to form three-dimensional columnar structures. These results are discussed in the context of previously reported studies on bacterial self-assembly.

Wetting Phenomena on (Gradient) Wrinkle Substrates

We characterize the wetting behavior of nanostructured wrinkle and gradient wrinkle substrates. Different contact angles on both sides of a water droplet after deposition on a gradient sample induce the self-propelled motion of the liquid toward smaller wrinkle dimensions. The droplet motion is self-limited by the contact angles balancing out. Because of the correlation between droplet motion and contact angles, we investigate the wetting behavior of wrinkle substrates with constant dimensions (wavelengths of 400-1200 nm). Contact angles of water droplets on those substrates increase with increasing dimensions of the underlying substrate. The results are independent of the two measurement directions, parallel and perpendicular to the longitudinal axis of the nanostructure. The presented findings may be considered for designing microfluidic or related devices and initiate ideas for the development of further wrinkle applications.

Wrinkles on a textile-embedded elastomer surface with highly variable friction

Wrinkling of a soft elastomer surface capped by a relatively hard thin film or modified by some physical treatments to induce hardening has been widely studied for applications in fields such as low-cost micro-fabrication, optics and tribology. Here we show that a biaxial textile sheet embedded on the surface of an elastomer buckles and selectively forms anisotropic wrinkles when experiencing a compressive strain in the fibre axial direction. The wrinkles also possess a fine surface structure that originates from the periodic structure of the biaxial textile sheet. Depending on whether the surface is wrinkled or not, the unique frictional property due to which the friction on wrinkles significantly decreases by a factor of less than 0.1 because of the localized contact regions on the protrusions originating from the textile structure is shown.

Polymer Swelling Induced Conductive Wrinkles for an Ultrasensitive Pressure Sensor

Deposition of particular layers of solid materials on a swelling polymer leads to the formation of functional wrinkles after the release of polymer strain. Unlike traditional mechanical stretching, polymer swelling could introduce uniform wrinkle structures on complex substrates as a result of isotropic polymer elongation. In this work, conductive silver wrinkles are grown on an elastomer by combining polymer swelling with electroless deposition. By adjusting the cross-linking ratio of polymer substrate or deposition time, the amplitude and wavelength of wrinkles can be tuned to meet demands for ultrasensitive pressure sensors. The detectable pressure limit is successfully reached below 1.0 Pa.

Tailoring the Orientation and Periodicity of Wrinkles Using Ion-Beam Bombardment

The present study demonstrates that surface reformation in polydimethylsiloxane can be controlled using ion-beam (IB) irradiation. This can be done by simply varying the IB incidence angle and requires no change in the energy source. By controlling the incidence angle of IB irradiation, we were able to continuously control the pattern of the wrinkle structure, that is, a randomly formed pattern or an anisotropic one. Moreover, the directional characteristics of the wrinkle pattern control the alignment of liquid crystal molecules. This control is a function of the incidence angle of the IB. These simple methods can provide considerable flexibility in the fabrication of wrinkle structures.

Polymeric Colloidal Nanostructures Fabricated via Highly Controlled Convective Assembly and Their Use for Molecular Imprinting

In this work, the formation of various polystyrene (PS) colloidal structures on striped PS patterns is demonstrated based on a simple and novel convective assembly method that controls the electrostatic interactions between the PS colloidal particles and sodium dodecyl sulfate (SDS). Under the optimal conditions (different withdrawal speeds, channel dimensions, suspension concentrations, etc.), highly ordered structures such as highly close-packed, zigzag, and linear colloidal aggregates are observed. In addition, these colloidal arrangements are used for development of molecularly imprinted polymer (MIP) sensors with highly improved sensing properties. Using PDMS replicas, three hemispherical poly(methacrylic acid-ethylene glycol dimethacrylate) (poly(MAA-EGDMA)) MIP films, including planar MIP and non-imprinted polymer (NIP) films, are photopolymerized for detection of trace atrazine in an aqueous solution. From gravimetric quartz crystal microbalance (QCM) measurements, a non-close-packed MIP film exhibits highest sensing response (Δf = 932 Hz) to atrazine detection among hemispherical MIP films and shows 6.5-fold higher sensing response than the planar MIP film. In addition, the sensitivity of the MIP sensor is equivalent to -119 Hz/(mol L(-1)). From the ratio of slopes of the calibration curves for the hemispherical MIP and NIP films, the imprinting factor (If) is as high as 11.0. The hemispherical MIP film also shows excellent selectivity in comparison with the sensing responses of other analogous herbicides. As a result, this molecular surface imprinting using PS colloidal arrays is highly efficient for herbicide detection.

Tailoring graphene oxide assemblies by pinning on the contact line of a dissolving microdroplet

The controlled dissolution of microdroplets on a supporting substrate is an effective approach that can be used to tune the assembled microstructure of basic units suspended within the droplet. In this work, we studied the self-assembly of two-dimensional graphene oxide (GO) nanosheets driven by the dissolution of a microdroplet situated at the interface between a solid substrate and the surrounding liquid phase. We found that although uniform microstructures form at the liquid-liquid interface of the droplets, the contact between the droplet and the substrate can give rise to a variety of different morphologies near the base of the droplet. In particular, pinning effects at the boundary of the dissolving droplet on the substrate lead to non-spherical GO assemblies. The results in this work demonstrate the possibility that tailored three-dimensional architectures of nanosheets assembled in a dissolving droplet may be achieved through control of the wetting properties of the droplet on the supporting substrate.

Optically anisotropic substrates via wrinkle-assisted convective assembly of gold nanorods on macroscopic areas

We demonstrate the large-scale organisation of anisotropic nanoparticles into linear assemblies displaying optical anisotropy on macroscopic areas. Monodisperse gold nanorods with a hydrophilic protein shell are arranged by dip-coating on wrinkled surfaces and subsequently transferred to indium tin oxide (ITO) substrates by capillary transfer printing. We elucidate how tuning the wrinkle amplitude enables us to precisely adjust the assembly morphology and fabricate single, double and triple nanorod lines. For the single lines, we quantify the order parameter of the assemblies as well as interparticle distances from scanning electron microscopy (SEM) images. We find an order parameter of 0.97 and a mean interparticle gap size of 7 nm. This combination of close to perfect uni-axial alignment and close-packing gives rise to pronounced macroscopic anisotropic optical properties due to strong plasmonic coupling. We characterise the optical response of the assemblies on ITO-coated glass via UV/vis/NIR spectroscopy and determine an optical order parameter of 0.91. The assemblies are thus plasmonic metamaterials, as their periodicity and building block sizes are well below the optical wavelength. The presented approach does not rely on lithographic patterning and provides access to functional materials, which could have applications in subwavelength waveguiding, photovoltaics, and for large-area metamaterial fabrication.

Swelling-induced surface instability patterns guided by pre-introduced structures

Swelling-induced, spontaneously generated surface instability patterns in substrate-attached hydrogel films can be harnessed for advanced applications, however, methods to control their formation and morphology are missing. Here we propose that their generation may be guided by intentionally pre-introduced line structures. While uniform gel films produce irregular polygonal instability patterns, instability patterns generated in pre-patterned films with hexagonal line structures are regular hexagons with long-range order. The pre-introduced line structures act as defects in the generation of the surface instability patterns, which determine the position of the creases, regulate their rearrangement and determine their final morphology. The contrast between the pre-introduced structures and the surrounding area should be high enough for the pre-introduced structures to act as defects. Only when the characteristic wavelength of the pre-introduced pattern matches with the one of the gel film, perfect hexagonal patterns can be obtained. The gel films with uniform topographic features may find various advanced applications.

Strongly coupled plasmonic modes on macroscopic areas via template-assisted colloidal self-assembly

We present ensembles of surface-ordered nanoparticle arrangements, which are formed by template-assisted self-assembly of monodisperse, protein-coated gold nanoparticles in wrinkle templates. Centimeter-squared areas of highly regular, linear assemblies with tunable line width are fabricated and their extinction cross sections can be characterized by conventional UV/vis/NIR spectroscopy. Modeling based on electrodynamic simulations shows a clear signature of strong plasmonic coupling with an interparticle spacing of 1-2 nm. We find evidence for well-defined plasmonic modes of quasi-infinite chains, such as resonance splitting and multiple radiant modes. Beyond elementary simulations on the individual chain level, we introduce an advanced model, which considers the chain length distribution as well as disorder. The step toward macroscopic sample areas not only opens perspectives for a range of applications in sensing, plasmonic light harvesting, surface enhanced spectroscopy, and information technology but also eases the investigation of hybridization and metamaterial effects fundamentally.

Reinforced shape-tunable microwrinkles formed on a porous-film-embedded elastomer surface

A new structural design is proposed for wrinkling to improve mechanical durability by exploiting a porous polymer film embedded on the surface of an elastomer, which acts as a hard layer, buckles into wrinkles and effectively suppresses fatal failures such as delamination and cracking.

The role of substrate pre-stretch in post-wrinkling bifurcations

When a stiff film on a soft substrate is compressed, the surface of the film forms wrinkles, with tunable wavelengths and amplitudes that enable a variety of applications. As the compressive strain increases, the film undergoes post-wrinkling bifurcations, leading to period doubling and eventually to formation of localized folds or ridges. Here we study the post-wrinkling bifurcations in films on pre-stretched substrates. Through a combination of experiments and simulations, we demonstrate that pre-stretched substrates not only show substantial shifts in the critical strain for the onset of post-wrinkling bifurcations, but also exhibit qualitatively different post-wrinkled states. In particular, we report on the stabilization of wrinkles in films on pre-tensioned substrates and the emergence of 'chaotic' morphologies in films on pre-compressed substrates.

High aspect ratio wrinkles via substrate prestretch

A non-fractured, high aspect ratio wrinkled surface is successfully fabricated. Building upon recently developed models of the localization transition and the current knowledge of surface failures, the wrinkling mode is stabilized at high strain, doubling the accessible wrinkling aspect ratio to the currently reported value. This high aspect ratio surface provides significant promise for future wrinkle-based applications.