Luminescent metal–organic frameworks

Stable and efficient rare-earth free phosphors based on an Mg(II) metal-organic framework for hybrid light-emitting diodes

Stable and efficient green hybrid light-emitting diodes (HLEDs) were fabricated from a highly emissive Mg(II)-tetraphenyl ethylene derivative metal-organic framework embedded in a polystyrene matrix (Mg-TBC MOF@PS). The photoluminescence quantum yield (ϕ) of the material, >80%, remains constant upon polymer embedment. The resulting HLEDs featured high luminous efficiencies of >50 lm W-1 and long lifetimes of >380 h, making them among the most stable MOF-based HLEDs. The significance of this work relies on the combination of many features, such as the abundance of the metal ion, the straightforward scalability of the synthetic protocol, the great ϕ reached upon phosphor fabrication, and the state-of-the-art HLED performances.

Cerium(III) and 5-methylisophthalate-based MOFs with slow relaxation of magnetization and photoluminescence emission

Two novel Ce(III) metal organic frameworks (MOFs) with formulas [Ce(5Meip)(H-5Meip)]nGR-MOF-17 and [CeCl(5Meip)(DMF)]nGR-MOF-18 (5Meip = 5-methylisophthalate, DMF = N,N-dimethylformamide) have been synthesized, forming 3-dimensional frameworks. Magnetic measurements show that both compounds present field-induced slow magnetic relaxation under a small applied dc field. For GR-MOF-17, the temperature dependence of relaxation times is best described by a Raman mechanism, whereas for GR-MOF-18, relaxation occurs through a combination of Raman and local-mode pathways. Moreover, when avoiding short Ce⋯Ce interactions by magnetic dilution in GR-MOF-17@La and GR-MOF-18@La, only the local-mode mechanism is responsible for magnetic relaxation. Photophysical studies show the occurrence of ligand-centred luminescence in both compounds and phosphorescence emission at low temperature for GR-MOF-17.

A novel 2D Eu-MOF as a dual-functional fluorescence sensor for detection of benzaldehyde and Fe3

Lanthanide metal-organic frameworks (Ln-MOFs) have unique advantages in sensing due to their excellent optical properties. In this study, we synthesized a dicarboxylic acid ligand with amide groups and successfully synthesized a novel two-dimensional (2D) MOF with the molecular formula C42H31EuN4O10 (Eu-MOF) by a solvothermal method. Single-crystal X-ray diffraction showed that amide groups are exposed on the outside of the two-dimensional coordination layer, with the possibility of recognizing specific molecules through hydrogen bonding interactions. The ligand's "antenna effect" enables Eu-MOF to emit a strong luminescence characterized by the "f-f" transition. Further studies have revealed that Eu-MOF could be used as a bifunctional fluorescent probe for the selective detection of benzaldehyde and Fe3+. The sensing mechanism has been analyzed in detail through powder X-ray diffraction (PXRD) analysis, UV-vis spectroscopy, fluorescence lifetime measurement, and density functional (DFT) theory calculation. This design and research can provide a reference for subsequent related work.

Emissive supramolecular ionic crystals combining a red-NIR phosphorescent [Re6Se8CN6]4- cluster anion and a blue fluorescent tetraphenylethene counter-cation

A blue fluorescent tetraphenylethylene-based dication and a red-NIR phosphorescent rhenium octahedral cluster tetra-anion are associated electrostatically to generate a supramolecular ionic framework which crystallizes in the P1̄ centric space group. The emission properties of the hybrids are studied in the crystalline state and in solution revealing a resonant energy transfer and a high sensitivity toward oxygen.

Recent progress on charge transfer engineering in reticular framework for efficient electrochemiluminescence

Electrochemiluminescence (ECL) is a luminescence production technique triggered by electrochemistry, which has emerged as a powerful analytical technique in bioanalysis and clinical diagnosis. During ECL, charge transfer (CT) is an important process between electrochemical excitation and luminescent emission, and dramatically affects the efficiency of exciton generation, playing a pivotal role in the light-emitting properties of nanomaterials. Reticular framework materials with intramolecular/intermolecular interactions offer a promising platform for regulating CT pathways and enhancing luminescence efficiency. Deciphering the role of intramolecular/intermolecular CT processes in reticular framework materials allows for the targeted design and synthesis of emitters with precisely controlled CT properties. This sheds light on the microscopic mechanisms of electro-optical conversion in ECL, propelling advancements in their efficiency and breakthrough applications. This mini-review focuses on recent advancements in engineering CT within reticular frameworks to boost ECL efficiency. We summarized strategies including intra-reticular charge transfer, CT between the metal and ligands, and CT between guest molecules and frameworks within reticular frameworks, which holds promise for developing next-generation ECL devices with enhanced sensitivity and light emission.

Water bridges as the trigger in an amino functionalized Zn-MOF for highly selective and sensitive fluorescent sensing of water

Water is a fundamental element for life. The highly selective and sensitive sensing of water is always attractive for mankind in activities such as physiological processes study and extraterrestrial life exploration. Fluorescent MOFs with precise channels and functional groups might specifically recognize water molecules with hydrogen-bond interaction or coordination effects and work as water sensors. As a proof of concept, herein, an amino functionalized Zn-MOF (named as complex 1) with pores that just right for water molecules to form hydrogen bond bridges is revealed for highly selective and sensitive fluorescent sensing of water. The single-crystal X-ray diffraction analysis indicates that the 3D framework of complex 1 is functionalized with free amino groups in the channels. Hydrogen bonds formed in the channel along b-axis as water bridges to connect two adjacent NH2bdc ligands and result in the restriction of intramolecular motions (RIM) which could responsible for the selective turn-on fluorescence response to water. Complex 1 exhibits high sensitive to trace amount of water in organic solvents and could be used for water detection in a wide range water contents. Take advantages of complex 1, portable sensors (complex 1@PMMA) were prepared and used in the highly sensitive water sensing.

Host-Guest Metal-Organic Frameworks-Based Long-Afterglow Luminescence Materials

Long-afterglow materials have a broad of applications in optoelectronic devices, sensors, medicine and other fields due to their excellent luminescent properties. The host-guest long-afterglow MOFs material combines the advantages of multi-component characteristics and the stability of MOFs, which improves its luminous performance and expands its other properties. This review introduces the classification, synthesis and application of host-guest MOFs materials with long afterglow. Due to their rigid frames and multi-channel characteristics, MOFs can load common guest materials including rare earth metals, organic dyes, carbon dots, etc. The synthesis methods of loading guest materials into MOFs include solvothermal synthesis, post-encapsulation, post-modification, etc. Those long-afterglow host-guest MOFs have a wide range of applications in the fields of sensors, information security and biological imaging.

Structure-Assisted Boronic Acid Implanted Mesoporous Metal-Organic Frameworks for Specific Extraction of cis-Diol Molecules

cis-Diol-containing molecules, an essential type of compounds in living organisms, have attracted intensive research interest from various fields. The analysis of cis-diol-containing molecules is still suffering from some drawbacks, including low abundance and abundant interference. Metal-organic frameworks (MOFs) have proven to be an ideal sorbent for sample preparation. However, most of the reported MOFs are mainly restricted to a microporous regime (pore size <2 nm), which greatly limits the application. Herein, a facile strategy is established to construction of boronate affinity MOFs via the postsynthetic ligand-exchange process. Owing to the fact that the ligand-exchange process was assisted by the structural integrity of the primitive metal-organic framework and the great compatibility of click chemistry, the obtained EPBA-PCN-333(Fe) is able to realize the maximum maintaining the porosity and crystallinity of the parent material. Several intriguing features of EPBA-PCN-333(Fe) (e.g., excellent selectivity, efficient diffusion, good accessibility, and size exclusion effect) are experimentally demonstrated via a series of cis-diol-containing molecules with different molecular sizes (small molecules, glycopeptides, and glycoproteins). The binding performance of EPBA-PCN-333(Fe) is evaluated by employing catechol as the test molecule (binding capacity: 0.25 mmol/g, LOD: 200 ng/mL). Finally, the real-world applications of EPBA-PCN-333(Fe) were demonstrated by the detection of nucleosides of human urine samples.

Synthesis, structure and photoluminescence properties of heterometallic-based coordination polymers of trimesic acid

Reacting trimesic acid (H3TMA, C9H6O6) with CaCl2 and MCl2 at 110 °C under hydrothermal conditions gave the isostructural heterobimetallic coordination polymers (CPs) catena-poly[[tetraaquazinc(II)]-μ-5-carboxybenzene-1,3-dicarboxylato-[tetraaquacalcium(II)]-μ-5-carboxybenzene-1,3-dicarboxylato], [CaZn(HTMA)2(H2O)8]n, 1, and catena-poly[[tetraaquacobalt(II)]-μ-5-carboxybenzene-1,3-dicarboxylato-[tetraaquacalcium(II)]-μ-5-carboxybenzene-1,3-dicarboxylato], [CaCo(HTMA)2(H2O)8]n, 2. Compounds 1 and 2 crystallize in the monoclinic space group C2/c. The solid-state structures consist of eight-coordinate CaII ions and six-coordinate MII ions. These ions are connected by a doubly deprotonated HTMA2- ligand to create a one-dimensional (1D) zigzag chain. Poly[[decaaquabis(μ3-benzene-1,3,5-tricarboxylato)calcium(II)dizinc(II)] dihydrate], {[CaZn2(TMA)2(H2O)10]·2H2O}n, 3, was found incidentally as a minor by-product during the synthesis of 1 at a temperature of 140 °C. It forms crystals in the orthorhombic space group Ccce. The structure of 3 consists of a two-dimensional (2D) layer composed of [Zn(TMA)] chains that are interconnected by CaII ions. The presence of aromatic carboxylic acid ligands and water molecules, which can form numerous hydrogen bonds and π-π interactions, increases the stability of the three-dimensional (3D) supramolecular architecture of these CPs. Compounds 1 and 2 exhibit thermal stability up to 420 °C, as indicated by the thermogravimetric analysis (TGA) curves. The powder X-ray diffraction (PXRD) data reveal the formation of unidentified phases in methanol and dimethyl sulfoxide, while 1 exhibits chemical stability in a wide range of solvents. The luminescence properties of 1 dispersed in various low molecular weight organic solvents was also examined. The results demonstrate excellent selectivity, sensitivity and recyclability for detecting acetone molecules in aqueous media. Additionally, a possible sensing mechanism is also outlined.

Packaged europium/fluorescein-based hydrogen bond organic framework as ratiometric fluorescent probe for visual real-time monitoring of seafood freshness

The freshness of sea food has always been the focus of attention from consumers, and food-safety issues are in urgent need of efficient approaches. A HOF-based ratiometric fluorescence probe (HOF-FITC/Eu) featuring superior amine-response, offers the real-time and visual detection of seafood freshness. Via intermolecular hydrogen bond interaction to form hydrogen-bonded organic frameworks (HOFs), which serve as a structural basis for the conjugate loading of pH-sensitive fluorescein (5-FITC) and coordination doping of lanthanide Eu3+. Amine vapors stimulate the dual-wavelength (525 nm and 616 nm) characteristic fluorescence of HOF-FITC/Eu with an inverse trend, resulting in an increase of the ratio of I525 to I616 accompanied by a distinct color transition from red to green. Prepared HOF-FITC/Eu featuring sensitive red-green color change characteristics of amine response are readily dripped into composite films of filter paper through integrated smartphone and 254 nm UV lamp as mobile observation devices to on-site monitor the freshness of raw fish and shrimp samples. The intelligent food probe HOF-FITC/Eu opens a novel material assembly type for fluorescence sensing and a potential pathway for other functional materials in the field of investigational food.

Efficient porphyrin integrated UiO-66 probes for ratiometric fluorescence sensing of antibiotic residues in milk

Dual-emissive fluorescence probes were designed by integrating porphyrin into the frameworks of UiO-66 for ratiometric fluorescence sensing of amoxicillin (AMX). Porphyrin integrated UiO-66 showed dual emission in the blue and red region. AMX resulted in the quenching of blue fluorescence component, attributable to the charge neutralization and hydrogen bonds induced energy transfer. AMX was detected using (F438/F654) as output signals. Two linear relationships were observed (from 10 to 1000 nM and 1 to 100 µM), with a limit of detection of 27 nM. The porphyrin integrated UiO-66 probe was used to detect AMX in practical samples. This work widens the road for the development of dual/multiple emissive fluorescence sensors for analytical applications, providing materials and theoretical supporting for food, environmental, and human safety.

Multiple-Emitting Luminescent Metal-Organic Framework as an Array-on-a-MOF for Rapid Screening and Discrimination of Nitroaromatics

Fluorescence array technologies have attracted great interest in the sensing field because of their high sensitivity, low cost, and capability of multitarget detection. However, traditional array sensing relies on multiple independent sensors and thus often requires time-consuming and laborious measurement processes. Herein, we introduce a novel fluorescence array strategy of the array-on-a-metal-organic framework (MOF), which integrates multiple array elements into a single MOF matrix to achieve facile sensing and discrimination of multiple target analytes. As a proof-of-concept system, we constructed a luminescent MOF containing three different emitting channels, including a lanthanide ion (europium/Eu3+, red emission), a fluorescent dye (7-hydroxycoumarin-4-acetic acid/HCAA, blue emission), and the MOF itself (UiO-66-type MOF, blue-violet emission). Five structurally similar nitroaromatic compounds (NACs) were chosen as the targets. All three channels of the array-on-a-MOF displayed rapid and stable fluorescence quenching responses to NACs (response equilibrium achieved within 30 s). Different responses were generated for each channel against each NAC due to the various quenching mechanisms, including photoinduced electron transfer, energy competition, and the inner filter effect. Using linear discriminant analysis, the array-on-a-MOF successfully distinguished the five NACs and their mixtures at varying concentrations and demonstrated good sensitivity to quantify individual NACs (detect limit below the advisory concentration in drinking water). Moreover, the array also showed feasibility in the sensing and discrimination of multiple NACs in real water samples. The proposed "array-on-a-MOF" strategy simplifies multitarget discrimination procedures and holds great promise for various sensing applications.

Influence of Humidity on Layer-by-Layer Growth and Structure in Coordination Networks

Metal-organic frameworks (MOFs) are promising materials because of their high designability of pores and functionalities. Especially, MOF thin films and their properties have been investigated toward applications in nanodevices. Typically, MOF thin films are fabricated by using a bottom-up method such as layer-by-layer (LbL) growth in air. Because the water molecules can coordinate and be replaced with organic linkers during synthesis, humidity conditions will be expected to influence the LbL growth processes. In this study, we fabricated MOF thin films composed of Zn2+, tetrakis-(4-carboxyphenyl)-porphyrin (TCPP), and 4,4'-bipyridyl (bpy) at 10 and 40% relative humidity (RH) conditions. Then, we investigated the humidity effects on chemical compositions of TCPP and bpy, periodic structure, orientation, and surface morphology. At high RH, coordination replacement of water with the organic linkers becomes more competitive than that at low RH, resulting in a different TCPP/bpy composition ratio between the two RH conditions. Also, more frequent coordination replacements of water with the organic linkers at high RH led to the formation of phases other than that observed at low RH, loss of growth orientation, and rough surface. The findings clarified the importance of controlling the RH condition during LbL growth to obtain the desired coordination networks.

Luminescent Supramolecular Ionic Frameworks based on Organic Fluorescent Polycations and Polyanionic Phosphorescent Metal Clusters

Emissive ionic supramolecular frameworks are designed by associating tetraphenylethylene-based tetra-cationic units and di-anionic molybdenum or tetra-anionic rhenium octahedral clusters. Obtained structures were characterized by single-crystal X-ray diffraction. The emission properties of the hybrids were investigated as dry powders or in various solvents by one photon and two photon absorption leading to a O2 concentration dependent luminescence color for the Mo based hybrid.

Exciplex Formation by Complexation of an Electron-Accepting Guest in an Electron-Donating Pillar[5]arene Host Liquid

We present a novel system, a liquid-state pillar[5]arene decorated with tri(ethylene oxide) chains, that brings electron-donor and electron-acceptor molecules into proximity for efficient exciplex formation. The electron-accepting guests exhibit a blue-purple emission from a localized excited state upon excitation in common solvents. However, directly dissolving the guests in the electron-donating pillar[5]arene liquid (a bulk system) results in visible green emission from the formed exciplexes. In the bulk system, the guest molecules are always surrounded by excess pillar[5]arene molecules, resulting in the formation of mainly inclusion-type exciplexes. In the bulk system, energy migration occurs between the pillar[5]arene molecules. Excitation of the pillar[5]arenes results in a more intense green exciplex emission than that observed upon direct excitation of the guests. In summary, the pillar[5]arene liquid is a novel system for achieving efficient exciplex formation and energy migration that is different from typical solvent and solid systems.

Switching on emission in Zn(II) coordination complexes by tempering Namido character

A series of four-coordinate zinc(II) complexes is presented in which the amido vs. imino character of a ligated nitrogen donor correlates to the luminescence intensity. DFT analysis points to a distinct mechanism for this trend wherein emission can be switched on by restricting non-radiative decay pathways through the resonance-induced delocalization of amido ligand lone-pairs.

Constructing Lanthanide-Organic Complexes for X-ray Scintillation and Imaging

The photoluminescent properties of lanthanide complexes have been thoroughly investigated; however, there have been much fewer studies showcasing their potential use in ionizing radiation detection. In this work, we delve into the photo- and radio-induced luminescence of a series of lanthanide-bearing organic-inorganic hybrids and their potential as a platform for X-ray scintillation and imaging. The judicious synergy between lanthanide cations and 2,6-di(1H-pyrazol-1-yl)isonicotinate (bppCOO-) ligands affords six new materials with three distinct structures. Notably, Eu-bppCOO-1 and Tb-bppCOO-2 display sharp fingerprint X-ray-excited luminescence (XEL), the intensities of which can be linearly correlated with the X-ray dose rates over a broad dynamic range (0.007-4.55 mGy s-1). Moreover, the X-ray sensing efficacies of Eu-bppCOO-1 and Tb-bppCOO-2 were evaluated, showing that Tb-bppCOO-2 features a lower detection limit of 4.06 μGy s-1 compared to 14.55 μGy s-1 of Eu-bppCOO-1. Given the higher X-ray sensitivity and excellent radiation stability of Tb-bppCOO-2, we fabricated a flexible scintillator film for X-ray imaging by embedding finely ground Tb-bppCOO-2 in the polydimethylsiloxane (PDMS) polymer. The resulting scintillator film can be utilized for high-resolution X-ray imaging with a spatial resolution of approximately 7 lp mm-1.

Time-Resolved Spectroscopy for Dynamic Investigation of Photoresponsive Metal-Organic Frameworks

Photoresponsive MOFs with precise and adjustable reticular structures are attractive for light conversion applications. Uncovering the photoinduced carrier dynamics lays the essential foundation for the further development and optimization of the MOF material. With the application of time-resolved spectroscopy, photophysical processes including excimer formation, energy transfer/migration, and charge transfer/separation have been widely investigated. However, the identification of distinct photophysical processes in real experimental MOF spectra still remains difficult due to the spectral and dynamic complexity of MOFs. In this Perspective, we summarize the typical spectral features of these photophysical processes and the related analysis methods for dynamic studies performed by time-resolved photoluminescence (TR-PL) and transient absorption (TA) spectroscopy. Based on the recent understanding of excited-state properties of photoresponsive MOFs and the discussion of challenges and future outlooks, this Perspective aims to provide convenience for MOF kinetic analysis and contribute to the further development of photoresponsive MOF material.

Large-Area Conductive MOF Ultrathin Film Controllably Integrating Dinuclear-Metal Sites and Photosensitizers to Boost Photocatalytic CO2 Reduction with H2O as an Electron Donor

Owing to the electrical conductivity and periodic porosity, conductive metal-organic framework (cMOF) ultrathin films open new perspectives to photocatalysis. The space-selective assembly of catalytic sites and photosensitizers in/on cMOF is favorable for promoting the separation of photogenerated carriers and mass transfer. However, the controllable integration of functional units into the cMOF film is rarely reported. Herein, via the synergistic effect of steric hindrance and an electrostatic-driven strategy, the dinuclear-metal molecular catalysts (DMC) and perovskite (PVK) quantum dot photosensitizers were immobilized into channels and onto the surface of cMOF ultrathin films, respectively, affording [DMC@cMOF]-PVK film photocatalysts. In this unique heterostructure, cMOF not only facilitated the charge transfer from PVK to DMC but also guaranteed mass transfer. Using H2O as an electron donor, [DMC@cMOF]-PVK realized a 133.36 μmol·g-1·h-1 CO yield in photocatalytic CO2 reduction, much higher than PVK and DMC-PVK. Owing to the excellent light transmission of films, multilayers of [DMC@cMOF]-PVK were integrated to increase the CO yield per unit area, and the 10-layer device realized a 1115.92 μmol·m-2 CO yield in 4 h, which was 8-fold higher than that of powder counterpart. This work not only lightens the development of cMOF-based composite films but also paves a novel avenue for an ultrathin film photocatalyst.

Europium Metal-Organic Framework with a Tetraphenylethylene-Based Ligand: A Dual-Mechanism Quenching Immunosensor for Enhanced Electrochemiluminescence via the Coordination Trigger

The effective applications of electrochemiluminescence (ECL) across various fields necessitate ongoing research into novel luminophores and ECL strategies. In this study, self-luminous flower-like nanocomposites (Eu-tcbpe-MOF) were prepared by coordination self-assembly using the aggregation-induced emission material 1,1,2,2-tetrakis(4-carboxyphenyl)ethylene (H4TCBPE) and Eu(III) ions as the precursors. Compared with the monomers and aggregates of H4TCBPE, Eu-tcbpe-MOF exhibits stronger ECL emission. Such enhanced electrochemiluminescence is due to coordination as the coordination-triggered electrochemiluminescence (CT-ECL) enhancement effect. In this study, a cubic-structured nanocomposite (Co9S8@Au@MoS2) was used as an efficient quencher, and a more sensitive ECL detection platform was achieved by two quenching mechanisms: resonance energy transfer and competitive consumption of coreactants. N,N-Diethylethanolamine (DBAE) was used as a coreactant, and DBAE has a faster electron transfer rate and stronger energy supply efficiency than the traditional anodoluminescent coreactant tripropylamine, which effectively improves the ECL signal intensity of Eu-tcbpe-MOF. Hence, a sandwich-type ECL immunosensor was prepared by employing a dual-quenching mechanism, utilizing Eu-tcbpe-MOF as the detection probe and Co9S8@Au@MoS2 as the quencher, achieving precise detection of carcinoembryonic antigen from 0.1 pg·mL-1 to 100 ng·mL-1 with a detection limit of 35.1 fg·mL-1.

Fluorescent Eu-MOF@nanocellulose-based nanopaper for rapid and sensitive detection of uranium (Ⅵ)

Radioactive uranium leaks into natural water bodies mainly in the form of uranyl ions (UO22+), posing ecological and human health risks. Fluorescent europium-based metal-organic frameworks (Eu-MOFs) have been demonstrated to be effective fluorescent sensors for UO22+, but the large size, powder state and poor dispersity limit their further application. In this work, fluorescent Eu-MOFs were in-situ grown on TEMPO-oxidized cellulose nanofibers (TOCNFs), which is the first time that spherical Eu-MOF crystals with sizes below 10 nm were prepared. Fluorescence spectral analysis revealed a nine-fold increase in the fluorescence intensity of TOCNF@Eu-MOF compared to Eu-MOF. The nanocomposites achieved rapid and sensitive fluorescence quenching to UO22+ through the "antenna effect" and unsaturated Lewis basic sites on the ligands binding with UO22+. Moreover, TOCNF@Eu-MOF demonstrated excellent selectivity and anti-interference for UO22+ detection. For the nanopaper-based sensor made from TOCNF@Eu-MOF, the Stern-Volmer quenching constant (KSV) was calculated as 8.21 × 104 M-1, and the lowest limit of detection (LOD) was 6.6 × 10-7 M, significantly lower than the 1.32 × 10-6 M of Eu-MOFs. In addition, the nanopaper exhibited good fluorescence stability and cyclic detection performance, enabling the rapid and convenient detection of UO22+ in the aqueous phase within 30 s by simple dipping.

A fluorescence and SERS dual-mode sensing on tetracycline antibiotics based on Ag@NH2-MIL-101(Al) nanoprobe

Antibiotic residues are becoming more and more concern due to the increasingly serious resistance from bacteria to organism. On-site and accurate evaluation on antibiotics is necessary and urgent to effectively solve such public issue. To provide point-of-care-test (POCT) ideas for antibiotic accurate evaluation, a fluorescence (FL)-surface-enhanced Raman scattering (SERS) dual-mode detection of tetracycline antibiotic (TCs) was realized for the first time. Based on the inner filter effect in Ag@NH2-MIL-101(Al) nanoprobe, the fluorescence quenching was induced and the SERS signal was swiftly turn on through π-π interaction and hydrogen bonding in the presence of TCs. This FL-SERS dual mode sensor displayed excellent detection limits (FL in ∼10-3 ppm, SERS in ∼10-5 ppm), and achieved a reliable detection of TCs in honey with a recovery rate of 84.45%-112.08%. This method combines the advantages of FL and SERS detection, meanwhile, two techniques verified against each other to achieve highly sensitive and specific FL-SERS dual-mode sensor for TCs. We believe that such antibody-or aptamer-independent FL and SERS complementary nanoprobe can be applied to fast, direct and multiple sensing in environment and food hazards.

Ultrasensitive Eu-Based MOF Luminescence Sensor for Clenbuterol Visible Recognition

Clenbuterol (CLB) as an illegal feed additive may cause a great security risk to food safety. However, convenient and efficient detection means for CLB in practical application remain a formidable challenge. Herein, a stable Eu-based organic framework {[H2N(CH3)2]2[Eu2(ttca)2]·H2O}n (compound 1) (H4ttca = [1,1':2',1″-terphenyl]-4,4',4″,5'-tetracarboxylic acid) has been harvested, exhibiting excellent chemical stability and thermal stability. Luminescence investigation reveals that compound 1 can sensitively and selectively detect CLB without being affected by different components from simulated serum and urine (limit detection: 22.7 nM). Furthermore, sensor 1 can also be applicable to CLB recognition in real swine feeds, presenting excellent anti-interference performance. The good cyclicity of compound 1 endows CLB determination with many advantages: low cost, high stability, and simplicity. Importantly, in view of the indication of the luminescence color (red to blue), test membranes were fabricated and employed for convenient and fast CLB detection, providing a valuable scheme for the visual monitoring of CLB in meat products. This work enriches rare earth metal compounds and luminescence sensor portfolios and breaks the concentration record (nM) for detecting CLB compared with reported complex materials, providing an effective monitoring platform for CLB visually.

Bacterial Cellulose-Based MOF Hybrid as a Sensitive Switch Off-On Luminescent Sensor for the Selective Recognition of l-Histidine

In this study, a stable and luminescent UiO-66-NH2 (UN) and its derivative Cu2+@UN were prepared and utilized successfully as an Off-On luminescent sensing platform for effective, selective, as well as rapid (5 min) detection of l-Histidine (l-His). The UN reveals efficient quenching in the presence of Cu2+ ions through photoinduced electron transition (PET) mechanism as a dynamic quenching process (in the range of 0.01-1 mM) forming Cu2+@UN sensing platform. However, due to the remarkable affinity between l-His and Cu2+, the luminescence of Cu2+@UN is recovered in the presence of l-His indicating Turn-On behavior via a quencher detachment mechanism (QD). A good linear relationship between the l-His concentration and luminescence intensity was observed in the range of 0.01-40 μM (R2 = 0.9978) with a detection limit of 7 nM for l-His sensing. The suggested method was successfully utilized for l-His determination in real samples with good recoveries and satisfying consequences. Moreover, the result indicates that only l-His induces a significant luminescence restoration of Cu2+@UN and that the signal is significantly greater than that of the other amino acids. Also, the portable test paper based on bacterial cellulose (BC) as the Cu2+@UNBC sensing platform was developed to conveniently evaluate the effective detection of l-His.

A dual-ligand lanthanide-based metal-organic framework for highly selective and sensitive colorimetric detection of Fe2

Accumulation of heavy metals in humans and mammals causes health problems due to their abundance as transition metal ions. Iron (Fe2+) serves significantly in numerous biological processes as a heavy metal ion. In this study, we have designed and prepared a metal-organic framework (MOF) utilizing a one-step solvothermal process, incorporating a dual-ligand combination of terephthalic acid (H2BDC) and α,α',α''-tert-pyridine (TPY) with Eu3+ as the metal node. For this MOF, we termed it Eu-BDC/TPY. Eu-BDC/TPY has superior selectivity over other metal cations. It provides an accurate, sensitive, broad linear range colorimetric method for detecting Fe2+ in a concentration range of 1-50 μM with a modest limit of detection (0.33 μM). Eu-BDC/TPY detects the absence of Fe2+ quickly (within 5 seconds), which is very valuable in practical applications. In addition, the results can be used to create a digital image colorimetric card (DIC) using colorimetric software, enabling instantaneous detection of Fe2+ concentration using a smartphone.

Eu3+ doped ethylenediamine functionalized UiO-66 probe for fluorescence sensing of formaldehyde

The development of probes with selectivity and prompt detection of aldehydes molecules is of great importance for protecting human health and public security. Herein, a system based on ethylenediamine (EDA) functionalized and Eu3+-doped UiO-66, namely EDA-Eu3+@UiO-66, was designed to detect formaldehyde molecules. Based on the "antenna effect" of lanthanide elements, UiO-66 transfers the absorbed energy to Eu3+ ions and emits characteristic fluorescence belonging to Eu3+. By using the fluorescence peaks of UiO-66 and Eu3+ respectively, a ratiometric fluorescence sensing probe can be constructed. Formaldehyde molecules react with the -NH2 on the surface of EDA-Eu3+@UiO-66 through an aldehyde-amine condensation reaction and connect to the functionalized surface of UiO-66. Due to the absorption of excitation light energy by formaldehyde molecules, the energy transfer efficiency from UiO-66 to Eu3+ ions is reduced, resulting in the fluorescence quenching of EDA-Eu3+@UiO-66, thus achieving selective detection of formaldehyde. The fabricated sensing platform successfully detected residual formaldehyde in frozen shrimp tail samples. The system was also used to respond to formaldehyde vapor, and a significant fluorescence quenching effect was observed. This strategy provides a sensitive, selective, and reliable method for the visual sensing of formaldehyde.

Sensitivity to NH3 Vapor: Synthesis and Characterization of Five New Coordination Polymers Based on 2,2-Dimethylglutaric Acid and Bis(triazole)-Derived Ligands

Five new coordination polymers (CPs) were obtained as a result of hydrothermal reactions of 2,2-dimethylglutaric acid (H2dmg) and 1,4-bis(1H-1,2,4-triazol-1-ylmethyl)benzene (pbtx)/1,2-bis(1H-1,2,4-triazol-1-ylmethyl)benzene (obtx) ligands with some metal ions [Co(μ-dmg)(μ-obtx)]n (1), [Zn(μ-dmg)(μ-obtx)]n (2), [Cd(μ-dmg)(μ-obtx)]n (3), [Co2(μ-dmg)2(μ-pbtx)2]n (4), and [Cd(μ-dmg)(H2O)(μ-pbtx)]n (5). All of the compounds were characterized by elemental analysis, FT-IR spectroscopy, single-crystal X-ray diffraction, powder X-ray diffraction, and thermal analysis techniques. The single-crystal X-ray studies show that all compounds exhibit 2D layer structures. To examine the ammonia sensing properties of five new coordination complexes (1-5), the absorption and emission spectra of CPs embedded in ethyl cellulose thin films were measured by exposure to different concentrations of ammonia (NH3) vapor. The [Co2(μ-dmg)2(μ-pbtx)2]n (4)-based sensor agent was found to show promising sensor properties in detecting NH3 vapor.

Quality-dependent performance of hydrophobic ZIF-67 upon high-pressure water intrusion-extrusion process

Zeolitic imidazolate framework (ZIF) microporous materials have already been employed in many fields of energetic and environmental interest since the last decade. The commercial scale production of some of these materials makes them more accessible for their implementation in industrial processes; however, their massive synthesis may entail modifications to the preparation protocols, which may result in a loss in the optimization of this process and a drop in the material's quality. This fact may have implications for the performance of these materials during their lifetime, especially when they are used in applications such as energy dissipation, in which they are subjected to several operating cycles under high pressures. This study focuses on ZIF-67, a material that has demonstrated in the past its ability to dissipate energy through the water intrusion-extrusion process under high pressure. Two ZIF-67 samples were synthesized using different protocols, and 2 batches of different qualities (labelled as high quality (HQ) and low quality (LQ)) were obtained and analysed by water porosimetry to study their performance in the intrusion-extrusion process. Unexpectedly, minor structural differences, which are typically neglected especially under production conditions, had a dramatic effect on their performance. The results presented in this study reiterate the importance of quality control with respect to reproducibility of experimental results. In a broader perspective, they are critical to the technology transfer from academia to industry.

Rare Earth -MOFs: From Synthesis to Their Deployment for Amine-Sensing Application in Aqueous Media

The pursuit of developing sensors, characterized by their fluorescence-intensity enhancement or "turn-on" behavior, for accurately detecting noxious small molecules, such as amines, at minimal levels remains a significant challenge. Metal-organic frameworks (MOFs) have emerged as promising candidates as sensors as a result of their diverse structural features and tunable properties. This study introduces the rational synthesis of a new highly coordinated (6,12)-connected rare earth (RE) alb-MOF-3, by combining the nonanuclear 12-connected hexagonal prismatic building units, [RE9(μ3-O)2(μ3-X)12(OH)2(H2O)7(O2C-)12], with the 6-connected rigid trigonal prismatic extended triptycene ligand. The resulting Y-alb-MOF-3 material is distinguished by its high microporosity and Brunauer-Emmett-Teller surface area of approximately 1282 m2/g, which offers notable hydrolytic stability. Remarkably, it demonstrates selective detection capabilities for primary aliphatic amines in aqueous media, as evidenced by fluorescence turn-on behavior and photoluminescence (PL) titration measurements. This work emphasizes the potential of MOFs as sensors in advancing their selectivity and sensitivity toward various analytes.

Chemical Sensors Based on Covalent Organic Frameworks

Covalent organic frameworks (COFs) are a type of crystalline porous polymer composed of light elements through strong covalent bonds. COFs have attracted considerable attention due to their unique designable structures and excellent material properties. Currently, COFs have shown outstanding potential in various fields, including gas storage, pollutant removal, catalysis, adsorption, optoelectronics, and their research in the sensing field is also increasingly flourishing. In this review, we focus on COF-based sensors. Firstly, we elucidate the fundamental principles of COF-based sensors. Then, we present the primary application areas of COF-based sensors and their recent advancements, encompassing gas, ions, organic compounds, and biomolecules sensing. Finally, we discuss the future trends and challenges faced by COF-based sensors, outlining their promising prospects in the field of sensing.

Solid-State [2+2] Photoreaction of Isostructural Cd(II) Metal Complexes and Solid-State Fluorescence

A green method to synthesize cyclobutane derivatives has been developed over the past three decades in the form of solid-state [2+2] photochemical reactions. These solid-state reactions also play a major role in the structural transformation of hybrid materials. In this regard, crystal engineering has played a major role in designing photoreactive molecular systems. Here, we report three novel binuclear Cd(II) complexes with the molecular formula [Cd2(4spy)4L4], where 4spy = 4-styryl pyridine and L = p-toluate (1); 4-fluorobenzoate (2); and 3-fluorobenzoate (3). Although three different benzoates are used, all three complexes are isostructural, as corroborated through SCXRD experiments. Structural analysis also helped in identifying two potential photoreactions. These are both intra- and intermolecular in nature and are driven by the head-to-head (HH) and head-to-tail (HT) alignment of 4spy linkers within these metal complexes. 1H NMR spectroscopy studies showed evidence of a quantitative head-to-head photoreaction in all these three complexes, and SCXRD analysis of the recrystallization of the photoproducts also provided confirmation. TGA studies of these photoreactive complexes showed an increase in the thermal stability of the complexes due to the solid-state photoreaction. Photoluminescence studies of these complexes have been conducted, showing a blue shift in emission spectra across all three cases after the photoreaction.

Cu(II) Coordination Polymers Containing Mixed Ligands with Different Flexibilities: Structural Diversity and Iodine Adsorption

Reactions of N,N'-bis(3-methylpyridyl)oxalamide (L1), N,N'-bis(3-methylpyridyl)adipoamide (L2) and N,N'-bis(3-methylpyridyl)sebacoamide (L3) with tricarboxylic acids and Cu(II) salts afforded {[Cu(L1)(1,3,5-HBTC)]·H2O}n (1,3,5-H3BTC = 1,3,5-benzenetricarboxylic acid), 1, {[Cu1.5(L2)1.5(1,3,5-BTC)(H2O)2]·6.5H2O}n, 2, [Cu(L2)0.5(1,3,5-HBTB)]n (1,3,5-H3BTB = 1,3,5-tri(4-carboxyphenyl)benzene), 3, [Cu4(L3)(OH)2(1,3,5-BTC)2]n, 4, {[Cu3(L3)2(1,3,5-BTB)2]·2.5MeOH·2H2O}n, 5, and {[Cu3(L3)2(1,3,5-BTB)2 ]·DMF·2H2O}n, 6, which have been structurally characterized by using single crystal X-ray crystallography. Complexes 1-4 form a 2D layer with the {44.62}-sql topology, a 2D layer with the (4.62)2(42.62.82)-bex topology, a three-fold interpenetrated 3D net with the (412·63)-pcu topology and a 3D framework with the (410·632·83)(42·6)2(43·63) topology, respectively, whereas 5 and 6 are 3D frameworks with the (63)2(64·82)(68·85·102) topology. Complex 5 shows a better iodine adsorption factor of 290.0 mg g-1 at 60 °C for 360 min than the other ones, revealing that the flexibility of the spacer ligand governs the structural diversity and the adsorption capacity.

Metal-Organic Framework Based on Pyrazinoquinoxaline Tetracarboxylic Acid for Fluorescence Sensing for Nitro Explosives

The rapid and selective detection of nitro explosives has become one of the current urgent environmental and safety issues. Fluorescent metal-organic frameworks (MOFs) provide strong support for the development of photoactive materials with excellent sensing performances. In this work, Zn2+ and pyrazinoquinoxaline tetracarboxylic acid with high nitrogen content were selected to construct a MOF structure termed Zn-MOF, which had excellent optical properties. The fluorescence sensing performance of Zn-MOF for nitro explosives was also investigated. The structural advantages of Zn-MOF, such as its porous structure, abundant host-guest interaction sites, and stable framework, ensure the prerequisites for various applications. Zn-MOF is not only capable of responding to a wide range of substrates, such as Fe3+, Cr2O72-, and MnO4-, to achieve fluorescence quenching detection but also able to achieve sensitive fluorescence sensing behavior for nitro explosives. In particular, for trinitrotoluene, the Ksv value can reach 8.72 × 103 M-1. The results show that the introduction of pyrazinoquinoxaline groups into MOFs can be an effective strategy for the preparation of highly efficient fluorescent sensing materials for nitro explosives.

A novel Cu-MOFs nanosheet/BiVO4 nanorod-based ECL sensor for colorectal cancer diagnosis

Although luminescence metal organic framework (MOFs) has displayed the significant advantages, the limitations in the electrochemical performance (e.g. rapid charge recombination rates and inadequate charge transport) limited the sensing application of MOFs. Herein, a novel Cu-MOFs/BiVO4 nanorod-based electrogenerated chemiluminescence (ECL) sensor has been developed. Firstly, Cu-MOFs with strong luminescence were synthesized via the three-layer approach as ECL emitter. Furthermore, BiVO4 nanorods was modified on the electrode as the actuator to improve the electrochemical activity of Cu-MOFs in the ECL process. As an n-type semiconductor, BiVO4 formed a complementary structure with p-type semiconductor Cu-MOF. Therefore, electrons in the conduction band of BiVO4 transferred to that of Cu-MOF. As a result, more electrons reacted with coreactant on the surface of Cu-MOF, which effectively enhanced the ECL performance of 2D Cu-MOFs nanosheets. As a result, the quantitation of KRAS gene was realized in the linear range of 0.1 pM-1 nM with a detection limit of 0.02 fM. Moreover, the detection of KRAS gene in actual colorectal cancer samples was also carried out with good recovery, which offered a broad application possibility for ECL research and clinical analysis.

MOF-based nanocomposites as transduction matrices for optical and electrochemical sensing

Metal Organic Frameworks (MOFs), a class of crystalline microporous materials have been into research limelight lately due to their commendable physio-chemical properties and easy fabrication methods. They have enormous surface area which can be a working ground for innumerable molecule adhesions and site for potential sensor matrices. Their biocompatibility makes them valuable for in vitro detection systems but a compromised conductivity requires a lot of surface engineering of these molecules for their usage in electrochemical biosensors. However, they are not just restricted to a single type of transduction system rather can also be modified to achieve feat as optical (colorimetry, luminescence) and electro-luminescent biosensors. This review emphasizes on recent advancements in the area of MOF-based biosensors with focus on various MOF synthesis methods and their general properties along with selective attention to electrochemical, optical and opto-electrochemical hybrid biosensors. It also summarizes MOF-based biosensors for monitoring free radicals, metal ions, small molecules, macromolecules and cells in a wide range of real matrices. Extensive tables have been included for understanding recent trends in the field of MOF-composite probe fabrication. The article sums up the future scope of these materials in the field of biosensors and enlightens the reader with recent trends for future research scope.

Simultaneous Detection and Decontamination of Dichromate Ions: The Fluorescence Response and Photocatalysis of Thiadiazole-Modified Zr-Metal-Organic Frameworks

The simultaneous analysis and removal of highly toxic hexavalent chromium (Cr (VI)) in contaminated water via an easy method remain a serious task. Based on the guidance of bibliometric analysis, a thiadiazole ligand-modified zirconium metal-organic framework (Zr-MOF) heralds a new and simple approach to Cr (VI) treatment. The concentration can be determined by fluorescence quenching with a low detection limit of 1.4 μM and a high quenching constant of 6.88 × 103 M-1. For the sensing mechanism, the fluorescence intensity of the Zr-MOF decreased rapidly due to the competition of Cr (VI) with the Zr-MOF for absorption excitation energy and the induction of Zr-MOF aggregation. The analysis system also displayed satisfactory stability and applicability. Apart from sensing application, Zr-MOF can convert Cr (VI) to Cr (III), and the reduction rate constant was 0.004 min-1 under irradiation. Therefore, the bifunctional Zr-MOF provided a potential application method for controlling the pollution caused by Cr (VI) in wastewater.

Correlation in Structural Architecture toward Fabrication of Schottky Device with a Series of Pyrazine Appended Coordination Polymers

Energy is the center of importance for the survivability of civilization. Use of fossil fuel is going to be suspended, and renewable energy is technologically costlier. In the quest for new energy sources and to minimize fuel expenditure, the design of energy efficient devices is one of the solutions. Toward this objective, highly delocalized π-acidic N-hetreocycle pyrazine bridged Cd(II)-based coordination polymers (CPs), [Cd(tppz)(adc)(MeOH)] (1), [Cd(tppz)(trep)] (2), and [Cd(tppz)(2,6-ndc)] (3; tppz = 2,3,5,6-tetrakis(2-pyridyl)pyrazine) are synthesized in combination with π-accessible dicarboxylato linkers (acetylene dicarboxylic acid (H2adc), terephthalic acid (H2trep), and 2,6-naphthalene dicarboxylic acid (2,6 H2ndc)). The structures of the compounds, 1-3, have been confirmed by single-crystal X-ray diffraction measurements. Analysis of electrical property demonstrates that light irradiation enhances the conductivity and follows the order 3 > 2 > 1; compound 3 possesses the highest conductivity (1.93 × 10-3 (light), 1.12 × 10-4 S m-1 dark)), than 2 (1.80 × 10-4 (light), 1.10 × 10-4 S m-1 (dark)) and 1 (5.06 × 10-5 (light), 4.72 × 10-5 S m-1 (dark)). This light-induced electrical conductivity can pave the way toward fabrication of an active electronic device by using the discussed materials.

A highly efficient lanthanide coordination polymer luminescent material for the multi-task detection of environmental pollutants

It is challenging to explore novel-structure lanthanide coordination polymers (Ln-CPs) for sensing environmental pollutants. Herein, we designed and synthesized an organic bridging linker 3-(carboxymethoxy)-1-(carboxymethyl) pyrazole-4-carboxylic acid (H3ccpc), and then successfully prepared and characterized a novel Ln-CP, namely [Tb2(ccpc)2(H2O)6]·1.5H2O (ccpcTb). Structural analysis indicates that ccpcTb exhibits a two-dimensional structure, in which Tb ions are in an eight-coordinated environment. The photoluminescence performance of ccpcTb was discussed in detail. The ccpcTb displays bright green luminescence and behaves as a multi-responsive luminescent sensor toward Fe3+ ions, Cr2O72- ions and 2,4,6-trinitrophenol with high selectivity and low detection limits. Furthermore, the possible luminescence sensing mechanisms have been addressed in detail. The luminescence quenching mechanism of sensing Fe3+ and Cr2O72- is attributed to the energy competitive absorption, while that of sensing TNP is due to the synergistic effect of energy competitive absorption and photo-induced electron transfer.

Nanomaterials for fluorescent detection of vitamin B2: A review

Vitamin B2 plays vital roles in maintaining human health. It is of tremendous significance to construct sensitive sensors of VB2. In this review, we first briefly presented the sensing mechanisms of fluorescent nanomaterials for sensing VB2. Subsequently, the advances of nanomaterials for fluorescent determination of VB2 were highlighted. And sensing performance of traditional approaches and fluorescent nanosensors was further compared. In last section, the challenges and perspectives concerning the topic were discussed.

Taking Advantage of a Luminescent ESIPT-Based Zr-MOF for Fluorochromic Detection of Multiple External Stimuli: Acid and Base Vapors, Mechanical Compression, and Temperature

Luminescent materials responsive to external stimuli have captivated great attention owing to their potential implementation in noninvasive photonic sensors. Luminescent metal-organic frameworks (LMOFs), a type of porous crystalline material, have emerged as one of the most promising candidates for these applications. Moreover, LMOFs constructed with organic linkers that undergo excited-state intramolecular proton-transfer (ESIPT) reactions are particularly relevant since changes in the surrounding environment induce modifications in their emission properties. Herein, an ESIPT-based LMOF, UiO-66-(OH)2, has been synthesized, spectroscopically and photodynamically characterized, and tested for detecting multiple external stimuli. First, the spectroscopic and photodynamic characterization of the organic linker (2,5-dihydroxyterephthalic acid (DHT)) and the UiO-66-(OH)2 MOF demonstrates that the emission properties are mainly governed by the enol → keto tautomerization, occurring in the organic linker via the ESIPT reaction. Afterward, the UiO-66-(OH)2 MOF proves for the first time to be a promising candidate to detect vapors of acid (HCl) and base (Et3N) toxic chemicals, changes in the mechanical compression (exercised pressure), and changes in the temperature. These results shed light on the potential of ESIPT-based LMOFs to be implemented in the development of advanced optical materials and luminescent sensors.

Assessing Early Atherosclerosis by Detecting and Imaging of Hypochlorous Acid and Phosphorylation Using Fluorescence Nanoprobe

The assessment of early atherosclerosis (AS) is of great significance for the early diagnosis and mechanism research. Herein, a novel nanoprobe PCN@FL is developed to realize the simultaneous detection and imaging of phosphorylation and hypochlorous acid (HClO). The selective recognition of HClO is achieved through the specific interaction between DMTC and HClO, while the levels of phosphorylation are detected via the specific interaction between Zr (IV) and phosphates. The nanoprobe can be utilized to monitor the fluctuations in HClO and phosphate in early atherosclerosis. It is observed that the levels of HClO and phosphate in the serum of early AS mice are higher than those of the normal mice. Ultimately, the levels of hypochlorous acid and phosphorylation in the inner wall of aortic vessels are imaged by two-photon microscope. The results show that the levels of HClO and phosphorylation in the early atherosclerotic mice are significantly higher than those of in normal mice. The nanoprobe provides a suitable fluorescent tool for simultaneous detection and imaging of HClO and phosphorylation, which holds promise for early atherosclerotic disease assessment.

Turn-off luminescence sensing, white light emission and magnetic studies of two-dimensional lanthanide MOFs

The lanthanide metal organic framework compounds [Ln(BPTA)1.5(Bpy)]·0.5DMF (Ln = Y, Eu, Gd, Tb, Dy; 1a-5a) and [Ln(BPTA)1.5(Phen)]·0.5DMF (Ln = Y, Eu, Gd, Tb, Dy; 1b-5b) were prepared by employing 2,5-bis(prop-2-yn-1-yloxy)terephthalic acid (2,5-BPTA) as the primary ligand and 2,2'-bipyridine (1a-5a) and 1,10-phenanthroline (1b-5b) as the secondary ligands. Single-crystal structural studies on [Gd(BPTA)1.5(Bpy)]·0.5DMF (3a) and [Dy(BPTA)1.5(Phen)]·0.5DMF (5b) indicated that the compounds have a two-dimensional structure. The Y compound exhibits blue emission, and the other compounds exhibit emission in the expected regions (λex = 350 nm). White light emission was achieved by careful mixing of the red (Eu3+) and green (Tb3+) components in the blue emitting Y compound. Thus, Y0.96Tb0.02Eu0.02 (bpy) and Y0.939Tb0.06Eu0.001 (phen) were found to show white emission when excited using a wavelength of 350 nm. The introduction of N-N-containing ancillary ligands (i.e., bpy and phen) increased the overall quantum yield (QY) of white light emission to 31% and 43%, respectively. The high QY observed for the Tb and Eu compounds was found to be sensitive and selective for the fluorometric detection of azinphos-methyl pesticide and trinitrophenol (TNP) in an aqueous medium at the ppb level. The same behaviour was observed when utilising the compounds as onsite paper strip sensors. Their magnetic properties were also studied, revealing for the Tb and Dy derivatives slow relaxation of the magnetisation at low temperature. The present study highlights the usefulness of rigid π-conjugated molecules such as 2,2'-bipyridine and 1,10-phenanthroline in enhancing the many utilities of rare-earth-containing MOFs towards white light emission, the sensing of harmful and dangerous substances and magnetic properties.

Exploring Various Photochemical Processes in Optical Sensing of Pesticides by Luminescent Nanomaterials: A Concise Discussion on Challenges and Recent Advancements

Food safety is a burning global issue in this present era. The prevalence of harmful food additives and contaminants in everyday food is a significant cause for concern as they can adversely affect human health. More particularly, among the different food contaminants, the use of excessive pesticides in agricultural products is severely hazardous. So, the optical detection of residual pesticides is an effective strategy to counter the hazardous effect and ensure food safety. In this perspective, nanomaterials have played a leading role in defending the open threat against food safety instigated by the reckless use of pesticides. Now, nanomaterial-based optical detection of pesticides has reached full pace and needs an inclusive discussion. This Review covers the advancement of photoprocess-based optical detection of pesticides categorically using nanomaterials. Here, we have thoroughly dissected the photoprocesses (aggregation and aggregation-induced emission (AIE), charge transfer and intramolecular charge transfer (ICT), electron transfer and photoinduced electron transfer (PET), fluorescence resonance energy transfer (FRET), hydrogen bonding, and inner filter effect) and categorically demarcated their significant role in the optical detection of pesticides by luminescent nanomaterials over the last few years.

Supramolecular-Interactions-Modulated Photoluminescence in Indium Bromide-Based Isomers

Here, two isomeric ionic zero-dimensional indium bromide crystals of α (1)/β (2)-[OPy][InBr4(Phen)] (OPy = N-octylpyridinium; Phen = 1,10-phenanthroline) have been isolated simply by changing the cooling conditions in solvothermal syntheses. Structural comparisons indicate their different supramolecular interactions, which can be confirmed by Hirshfeld surface analyses. The crystal 2 has additional hydrogen bonds and π-π interactions; as a result, the more compact stacking of 2 could result in a 10-fold higher photoluminescence (PL) quantum yield (PLQY) than that of 1. Density functional theory calculations confirm the electron transition from the inorganic moiety to the organic ligand, which provides a further understanding of the optical process. This work provides a new idea for designing PL indium-based halides by understanding the structure-PL relationship.

A new route for the syntheses of coordination polymers using magnetic influence: syntheses, crystal structures and fluorescence properties

Five coordination polymers [TM1(absa)(H2O)4]n and [TM2(absa)(bipy)(H2O)]n [TM1 = Zn (1), Co (2); TM2 = Zn (3), Co (4), Cu (5); Na2absa = 5,5'-azobissalicylic acid disodium salt; bipy = 4,4'-bipyride] were synthesized by solvent evaporation under a magnetic field. It is evident that magnetic fields bring significant and noticeable changes to the absa2- ligand orientation and the component movement behaviors to construct coordination polymers. The absa2- ligands bind to the metal ions in bridging coordination mode through the carboxylate groups, in addition to the bipy molecules adopting bridging modes. Photoluminescence measurements indicate that the emissions of compounds 1-5 are at 626, 600, 632, 658 and 682 nm in the solid state, respectively.

Synthesis and analytical characterization of Ca-BTC metal organic framework

Metal Organic framework (MOF) has been a class of great interest during the past few years owing to its decidedly applicative, easily synthesized and improved characteristics. Ca-BTC MOF is synthesized by Hydrothermal technique and reported for the first time. Its structural morphology was analyzed using XRD, SEM, and EDS, showing the tetragonal crystal structure having grain size of 24.92 nm and purity of sample respectively. FTIR, Raman Spectroscopy ensures the metal organic framework between Calcium and the tri-carboxylic group. Photoluminescence measures the energy gap of 3.792 eV, showing approximately the semiconducting behavior of synthesized material. Zeta potential having value of -13.5 mV confirms the instability having good microbial activity and conductivity i.e 0.290 mS/cm which reveals important insights into its electrical properties.

Specific Recognition and Adsorption of Volatile Organic Compounds by Using MIL-125-Based Porous Fluorescence Probe Material

The severity of the volatile organic compounds (VOCs) issue calls for effective detection and management of VOC materials. Metal-organic frameworks (MOFs) are organic-inorganic hybrid crystals with promising prospects in luminescent sensing for VOC detection and identification. However, MOFs have limitations, including weak response signals and poor sensitivity towards VOCs, limiting their application to specific types of VOC gases. To address the issue of limited recognition and single luminosity for specific VOCs, we have introduced fluorescent guest molecules into MOFs as reference emission centers to enhance sensitivity. This composite material combines the gas adsorption ability of MOFs to effectively adsorb VOCs. We utilized (MIL-125/NH2-MIL-125) as the parent material for adsorbing fluorescent molecules and selected suitable solid fluorescent probes (FGFL-B1) through fluorescence enhancement using thioflavin T and MIL-125. FGFL-B1 exhibited a heightened fluorescence response to various VOCs through charge transfer between fluorescent guest molecules and ligands. The fluorescence enhancement effect of FGFL-B1 on tetrahydrofuran (THF) was particularly pronounced, accompanied by a color change from yellow to yellowish green in the presence of CCl4. FGFL-B1 demonstrated excellent adsorption properties for THF and CCl4, with saturated adsorption capacities of 655.4 mg g-1 and 811.2 mg g-1, respectively. Furthermore, FGFL-B1 displayed strong luminescence stability and reusability, making it an excellent sensing candidate. This study addresses the limitations of MOFs in VOC detection, opening avenues for industrial and environmental applications.

Experimental and Theoretical Evaluation of the Thermodynamics of the Carbonation Reaction of ZIF-8 and Its Close-Packed Polymorph with Carbon Dioxide

We report the first experimental and theoretical evaluation of the thermodynamic driving force for the reaction of metal-organic framework (MOF) materials with carbon dioxide, leading to a metal-organic carbonate phase. Carbonation upon exposure of MOFs to CO2 is a significant concern for the design and deployment of such materials in carbon storage technologies, and this work shows that the formation of a carbonate material from the popular SOD-topology framework material ZIF-8, as well as its dense-packed dia-topology polymorph, is significantly exothermic. With knowledge of the crystal structure of the starting and final phases in the carbonation reaction, we have also identified periodic density functional theory approaches that most closely reproduce the measured reaction enthalpies. This development now permits the use of advanced theoretical calculations to calculate the driving forces behind the carbonation of zeolitic imidazolate frameworks with reasonable accuracy.

Fabrication and characterization of a novel catalyst based on modified zirconium metal-organic-framework for synthesis of polyhydroquinolines

A novel catalyst was fabricated in this study based on zirconium MOF modified with pyridine carboxaldehyde in a solvothermal reaction, embedded with cerium. In order to confirm the catalyst structure, various characterization techniques, including FTIR, Far IR, EDX, XRD, TGA, FE-SEM, ICP, and BET analyses, were employed. The results indicated that the UiO-66-Pyca-Ce (III) catalyst had a Langmuir surface area of 501.63 m2/g, a pore volume of 0.28 cm3/g, and a pore size of 2.27 nm. To study catalytic activity, a sequential approach of Knoevenagel condensation and Michael addition was used to synthesize various polyhydroquinoline derivatives. The reaction took place at ambient temperature. The UiO-66-Pyca-Ce (III) catalyst demonstrated high efficacy (90%) and reusability in asymmetric synthesis of polyhydroquinoline derivatives for several reasons, including the possession of three Lewis acid activation functions.

Aggregation behaviour of pyrene-based luminescent materials, from molecular design and optical properties to application

Molecular aggregates are self-assembled from multiple molecules via weak intermolecular interactions, and new chemical and physical properties can emerge compared to their individual molecule. With the development of aggregate science, much research has focused on the study of the luminescence behaviour of aggregates rather than single molecules. Pyrene as a classical fluorophore has attracted great attention due to its diverse luminescence behavior depending on the solution state, molecular packing pattern as well as morphology, resulting in wide potential applications. For example, pyrene prefers to emit monomer emission in dilute solution but tends to form a dimer via π-π stacking in the aggregation state, resulting in red-shifted emission with quenched fluorescence and quantum yield. Over the past two decades, much effort has been devoted to developing novel pyrene-based fluorescent molecules and determining the luminescence mechanism for potential applications. Since the concept of "aggregation-induced emission (AIE)" was proposed by Tang et al. in 2001, aggregate science has been established, and the aggregated luminescence behaviour of pyrene-based materials has been extensively investigated. New pyrene-based emitters have been designed and synthesized not only to investigate the relationships between the molecular structure and properties and advanced applications but also to examine the effect of the aggregate morphology on their optical and electronic properties. Indeed, new aggregated pyrene-based molecules have emerged with unique properties, such as circularly polarized luminescence, excellent fluorescence and phosphorescence and electroluminescence, ultra-high mobility, etc. These properties are independent of their molecular constituents and allow for a number of cutting-edge technological applications, such as chemosensors, organic light-emitting diodes, organic field effect transistors, organic solar cells, Li-batteries, etc. Reviews published to-date have mainly concentrated on summarizing the molecular design and multi-functional applications of pyrene-based fluorophores, whereas the aggregation behaviour of pyrene-based luminescent materials has received very little attention. The majority of the multi-functional applications of pyrene molecules are not only closely related to their molecular structures, but also to the packing model they adopt in the aggregated state. In this review, we will summarize the intriguing optoelectronic properties of pyrene-based luminescent materials boosted by aggregation behaviour, and systematically establish the relationship between the molecular structure, aggregation states, and optoelectronic properties. This review will provide a new perspective for understanding the luminescence and electronic transition mechanism of pyrene-based materials and will facilitate further development of pyrene chemistry.