Mapping the correlations between bandgap, HOMO, and LUMO trends for meta substituted Zn-MOFs

Bandgap is a key property that determines electrical and optical properties in materials. Modulating the bandgap thus is critical in developing novel materials particularly semiconductors with improved features. This study examines the bandgap, highest occupied molecular orbital (HOMO), and lowest unoccupied molecular orbital (LUMO) energy level trends in a metal organic framework, metal-organic framework 5 (MOF-5), as a function of Hammett substituent effect (with the constant σm in the meta-position of the benzene ring) and solvent dielectric effect (with the constant ε). Specifically, experimental design and response surface methodologies helped to assess the significance of trends and correlations between these molecular properties with σm and ε. While the HOMO and LUMO decrease with increasing σm, the LUMO exhibits greater sensitivity to the substituent's electron withdrawing capability. The relative difference in these trends helps to explain why the bandgap tends to decrease with increasing σm.

Efficient Modeling of Water Adsorption in MOFs Using Interpolated Transition Matrix Monte Carlo

With the specter of accelerating climate change, securing access to potable water has become a critical global challenge. Atmospheric water harvesting (AWH) through metal-organic frameworks (MOFs) emerges as one of the promising solutions. The standard numerical methods applied for rapid and efficient screening for optimal sorbents face significant limitations in the case of water adsorption (slow convergence and inability to overcome high energy barriers). To address these challenges, we employed grand canonical transition matrix Monte Carlo (GC-TMMC) methodology and proposed an efficient interpolation scheme that significantly reduces the number of required simulations while maintaining accuracy of the results. Through the example of water adsorption in three MOFs: MOF-303, MOF-LA2-1, and NU-1000, we show that the extrapolation of the free energy landscape allows for prediction of the adsorption properties over a continuous range of pressure and temperature. This innovative and versatile method provides rich thermodynamic information, enabling rapid, large-scale computational screening of sorbents for adsorption, applicable for a variety of sorbents and gases. As the presented methodology holds strong applicative potential, we provide alongside this paper a modified version of the RASPA2 code with a ghost swap move implementation and a Python library designed to minimize the user's input for analyzing data derived from the TMMC simulations.

Mg-MOF-74 Derived Defective Framework for Hydrogen Storage at Above-Ambient Temperature Assisted by Pt Catalyst

Metal-organic frameworks (MOFs) are promising candidates for room-temperature hydrogen storage materials after modification, thanks to their ability to chemisorb hydrogen. However, the hydrogen adsorption strength of these modified MOFs remains insufficient to meet the capacity and safety requirements of hydrogen storage systems. To address this challenge, a highly defective framework material known as de-MgMOF is prepared by gently annealing Mg-MOF-74. This material retains some of the crystal properties of the original Mg-MOF-74 and exhibits exceptional hydrogen storage capacity at above-ambient temperatures. The MgO5 knots around linker vacancies in de-MgMOF can adsorb a significant amount of dissociated and nondissociated hydrogen, with adsorption enthalpies ranging from -22.7 to -43.6 kJ mol-1, indicating a strong chemisorption interaction. By leveraging a spillover catalyst of Pt, the material achieves a reversible hydrogen storage capacity of 2.55 wt.% at 160 °C and 81 bar. Additionally, this material offers rapid hydrogen uptake/release, stable cycling, and convenient storage capabilities. A comprehensive techno-economic analysis demonstrates that this material outperforms many other hydrogen storage materials at the system level for on-board applications.

Pushing the Limits of Heat Conduction in Covalent Organic Frameworks Through High-Throughput Screening of Their Thermal Conductivity

Tailor-made materials featuring large tunability in their thermal transport properties are highly sought-after for diverse applications. However, achieving `user-defined' thermal transport in a single class of material system with tunability across a wide range of thermal conductivity values requires a thorough understanding of the structure-property relationships, which has proven to be challenging. Herein, large-scale computational screening of covalent organic frameworks (COFs) for thermal conductivity is performed, providing a comprehensive understanding of their structure-property relationships by leveraging systematic atomistic simulations of 10,750 COFs with 651 distinct organic linkers. Through the data-driven approach, it is shown that by strategic modulation of their chemical and structural features, the thermal conductivity can be tuned from ultralow (≈0.02 W m-1 K-1) to exceptionally high (≈50 W m-1 K-1) values. It is revealed that achieving high thermal conductivity in COFs requires their assembly through carbon-carbon linkages with densities greater than 500 kg m-3, nominal void fractions (in the range of ≈0.6-0.9) and highly aligned polymeric chains along the heat flow direction. Following these criteria, it is shown that these flexible polymeric materials can possess exceptionally high thermal conductivities, on par with several fully dense inorganic materials. As such, the work reveals that COFs mark a new regime of materials design that combines high thermal conductivities with low densities.

Utilizing Nanostructured Materials for Hydrogen Generation, Storage, and Diverse Applications

The rapid advancement of refined nanostructures and nanotechnologies offers significant potential to boost research activities in hydrogen storage. Recent innovations in hydrogen storage have centered on nanostructured materials, highlighting their effectiveness in molecular hydrogen storage, chemical storage, and as nanoconfined hydride supports. Emphasizing the importance of exploring ultra-high-surface-area nanoporous materials and metals, we advocate for their mechanical stability, rigidity, and high hydride loading capacities to enhance hydrogen storage efficiency. Despite the evident benefits of nanostructured materials in hydrogen storage, we also address the existing challenges and future research directions in this domain. Recent progress in creating intricate nanostructures has had a notable positive impact on the field of hydrogen storage, particularly in the realm of storing molecular hydrogen, where these nanostructured materials are primarily utilized.

DFT-Quality Adsorption Simulations in Metal-Organic Frameworks Enabled by Machine Learning Potentials

Nanoporous materials such as metal-organic frameworks (MOFs) have been extensively studied for their potential for adsorption and separation applications. In this respect, grand canonical Monte Carlo (GCMC) simulations have become a well-established tool for computational screenings of the adsorption properties of large sets of MOFs. However, their reliance on empirical force field potentials has limited the accuracy with which this tool can be applied to MOFs with challenging chemical environments such as open-metal sites. On the other hand, density-functional theory (DFT) is too computationally demanding to be routinely employed in GCMC simulations due to the excessive number of required function evaluations. Therefore, we propose in this paper a protocol for training machine learning potentials (MLPs) on a limited set of DFT intermolecular interaction energies (and forces) of CO2 in ZIF-8 and the open-metal site containing Mg-MOF-74, and use the MLPs to derive adsorption isotherms from first principles. We make use of the equivariant NequIP model which has demonstrated excellent data efficiency, and as such an error on the interaction energies below 0.2 kJ mol-1 per adsorbate in ZIF-8 was attained. Its use in GCMC simulations results in highly accurate adsorption isotherms and heats of adsorption. For Mg-MOF-74, a large dependence of the obtained results on the used dispersion correction was observed, where PBE-MBD performs the best. Lastly, to test the transferability of the MLP trained on ZIF-8, it was applied to ZIF-3, ZIF-4, and ZIF-6, which resulted in large deviations in the predicted adsorption isotherms and heats of adsorption. Only when explicitly training on data for all ZIFs, accurate adsorption properties were obtained. As the proposed methodology is widely applicable to guest adsorption in nanoporous materials, it opens up the possibility for training general-purpose MLPs to perform highly accurate investigations of guest adsorption.

Molecular Dynamics Studies of the Ho(III) Aqua-tris(dibenzoylmethane) Complex: Role of Water Dynamics

The seven-coordinate Ho(III) aqua-tris(dibenzoylmethane)(DBM) complex, referred to as Ho-(DBM)₃·H₂O, was first reported in the late 1960s. It has a threefold symmetric structure, with Ho at the center of three dibenzoylmethane ligands and hydrogen-bonded water to ligands. It is considered that the hydrogen bonds between the water molecule and the ligands surrounding Ho play an important role in the formation of its symmetrical structure. In this work, we developed new force-field parameters for classical molecular dynamics (CMD) simulations to theoretically elucidate the structure and dynamics of Ho-(DBM)₃·H₂O. To develop the force field, structural optimization and molecular dynamics were performed on the basis of ab initio calculations using the plane-wave pseudopotential method. The force-field parameters for CMD were then optimized to reproduce the data obtained from ab initio calculations. Validation of the developed force field showed good agreement with the experimental crystalline structure and ab initio data. The vibrational properties of water in Ho-(DBM)₃·H₂O were investigated by comparison with bulk liquid water. The vibrational motion of water was found to have a characteristic mode originating from stationary rotational motion along the c-axis of Ho(III) aqua-tris(dibenzoylmethane). Contrary to expectations, the hydrogen-bond dynamics of water in Ho-(DBM)₃·H₂O were found to be almost equivalent to those of bulk liquid water except for librational motion. This development route for force-field parameters for CMD and the establishment of water dynamics can advance the understanding of water-coordinated metal complexes with high coordination numbers such as Ho-(DBM)₃·H₂O.

Computational Insights into the Mechanism of Nitric Oxide Generation from S-Nitrosoglutathione Catalyzed by a Copper Metal-Organic Framework

The controlled generation of nitric oxide (NO) from endogenous sources, such as S-nitrosoglutathione (GSNO), has significant implications for biomedical implants due to the vasodilatory and other beneficial properties of NO. The water-stable metal-organic framework (MOF) Cu-1,3,5-tris[1H-1,2,3-triazol-5-yl]benzene has been shown to catalyze the production of NO and glutathione disulfide (GSSG) from GSNO in aqueous solution as well as in blood. Previous experimental work provided kinetic data for the catalysis of the 2GSNO → 2NO + GSSG reaction, leading to various proposed mechanisms. Herein, this catalytic process is examined using density functional theory. Minimal functional models of the Cu-MOF cluster and glutathione moieties are established, and three distinct catalytic mechanisms are explored. The most thermodynamically favorable mechanism studied is consistent with prior experimental findings. This mechanism involves coordination of GSNO to copper via sulfur rather than nitrogen and requires a reductive elimination that produces a Cu(I) intermediate, implicating a redox-active copper site. The experimentally observed inhibition of reactivity at high pH values is explained in terms of deprotonation of a triazole linker, which decreases the structural stability of the Cu(I) intermediate. These fundamental mechanistic insights may be generally applicable to other MOF catalysts for NO generation.

Ordered Macro-Microporous Single Crystals of Covalent Organic Frameworks with Efficient Sorption of Iodine

Fashioning microporous covalent organic frameworks (COFs) into single crystals with ordered macropores allows for an effective reduction of the mass transfer resistance and the maximum preservation of their intrinsic properties but remains unexplored. Here, we report the first synthesis of three-dimensional (3D) ordered macroporous single crystals of the imine-linked 3D microporous COFs (COF-300 and COF-303) via a template-assisted modulated strategy. In this strategy, COFs crystallized within the sacrificial colloidal crystal template, assembled from monodisperse polystyrene microspheres, and underwent an aniline-modulated amorphous-to-crystalline transformation to form large single crystals with 3D interconnected macropores. The effects of the introduced macroporous structure on the sorption performances of COF-300 single crystals were further probed by iodine. Our results indicate that iodine adsorption occurred in micropores of COF-300 but not in the introduced macropores. Accordingly, the iodine adsorption capacity of COF single crystals was governed by their micropore accessibility. The relatively long diffusion path in the non-macroporous COF-300 single crystals resulted in a limited micropore accessibility (48.4%) and thus a low capacity in iodine adsorption (1.48 g·g^-1). The introduction of 3D ordered macropores can greatly shorten the microporous diffusion path in COF-300 single crystals and thus render all their micropores fully accessible in iodine adsorption with a capacity (3.15 g·g^-1) that coincides well with the theoretical one.

Constructing a metal-free 2D covalent organic framework for visible-light-driven photocatalytic reduction of CO2: a sustainable strategy for atmospheric CO2 utilization

A 2D polyimide-linked covalent organic framework (COF) with band gap energy of 2.2 eV is developed as a stable and efficient porous photocatalyst which shows CO2 reduction to formic acid, formaldehyde and methanol.

Lead(II)-Azido Metal–Organic Coordination Polymers: Synthesis, Structure and Application in PbO Nanomaterials Preparation

The current study aims to explain recent developments in the synthesis of Pb(II)-azido metal-organic coordination polymers. Coordination polymers are defined as hybrid materials encompassing metal-ion-based, organic linkers, vertices, and ligands, serving to link the vertices to 1D, 2D, or 3D periodic configurations. The coordination polymers have many applications and potential properties in many research fields, primarily dependent on particular host–guest interactions. Metal coordination polymers (CPs) and complexes have fascinating structural topologies. Therefore, they have found numerous applications in different areas over the past two decades. Azido-bridged complexes are inorganic coordination ligands with higher fascination that have been the subject of intense research because of their coordination adaptability and magnetic diversity. Several sonochemical methods have been developed to synthesize nanostructures. Researchers have recently been interested in using ultrasound in organic chemistry synthetics, since ultrasonic waves in liquids accelerate chemical reactions in heterogeneous and homogeneous systems. The sonochemical synthesis of lead–azide coordination compounds resulted from very fantastic morphologies, and some of these compounds are used as precursors for preparing nano lead oxide. The ultrasonic sonochemistry approach has been extensively applied in different research fields, such as medical imaging, biological cell disruption, thermoplastic welding, food processing, and waste treatment. CPs serve as appropriate precursors for preparing favorable materials at the nanoscale. Using these polymers as precursors is beneficial for preparing inorganic nanomaterials such as metal oxides.

Polyimide-Based Covalent Organic Framework as a Photocurrent Enhancer for Efficient Dye-Sensitized Solar Cells

Covalent organic frameworks (COFs) are of great interest in the energy and optoelectronic fields due to their high porosity, superior thermal stability, and highly ordered conjugated architecture, which are beneficial for charge migration, charge separation, and light harvesting. In this study, polyimide COFs (PI-COFs) are synthesized through the condensation reaction of pyromellitic dianhydride (PMDA) with tris(4-aminophenyl) amine (TAPA) and then doped in the TiO₂ photoelectrode of a dye-sensitized solar cell (DSSC) to co-work with N719 dye to explore their functionality. As a benchmark, the pristine DSSC without the doping of PI-COFs exhibits a power conversion efficiency of 9.05% under simulated one sun illumination. The doping of 0.04 wt % PI-COFs contributes an enhanced short-circuit current density (J_SC) from 17.43 to 19.03 mA/cm², and therefore, the cell efficiency is enhanced to 9.93%. The enhancement of J_SC is attributed to the bifunctionality of PI-COFs, which enhances the charge transfer/injection and suppresses the charge recombination through the host (PI-COF)-guest (N719 dye) interaction. In addition, the PI-COFs also function as a cosensitizer and contribute a small quantity of photoinduced electrons upon sunlight illumination. Surface modification of oxygen plasma improves the hydrophilicity of PI-COF particles and reinforces the heterogeneous linkage between PI-COF and TiO₂ nanoparticles, giving rise to more efficient charge injection. As a result, the champion cell exhibits a high power conversion efficiency of 10.46% with an enhanced J_SC of 19.43 mA/cm². This methodology of increasing solar efficiency by modification of the photoelectrode with the doping of PI-COFs in the TiO₂ nanoparticles is promising in the development of DSSCs.

Freestanding Metal-Organic Frameworks and Their Derivatives: An Emerging Platform for Electrochemical Energy Storage and Conversion

Metal–organic frameworks (MOFs) have recently emerged as ideal electrode materials and precursors for electrochemical energy storage and conversion (EESC) owing to their large specific surface areas, highly tunable porosities, abundant active sites, and diversified choices of metal nodes and organic linkers. Both MOF-based and MOF-derived materials in powder form have been widely investigated in relation to their synthesis methods, structure and morphology controls, and performance advantages in targeted applications. However, to engage them for energy applications, both binders and additives would be required to form postprocessed electrodes, fundamentally eliminating some of the active sites and thus degrading the superior effects of the MOF-based/derived materials. The advancement of freestanding electrodes provides a new promising platform for MOF-based/derived materials in EESC thanks to their apparent merits, including fast electron/charge transmission and seamless contact between active materials and current collectors. Benefiting from the synergistic effect of freestanding structures and MOF-based/derived materials, outstanding electrochemical performance in EESC can be achieved, stimulating the increasing enthusiasm in recent years. This review provides a timely and comprehensive overview on the structural features and fabrication techniques of freestanding MOF-based/derived electrodes. Then, the latest advances in freestanding MOF-based/derived electrodes are summarized from electrochemical energy storage devices to electrocatalysis. Finally, insights into the currently faced challenges and further perspectives on these feasible solutions of freestanding MOF-based/derived electrodes for EESC are discussed, aiming at providing a new set of guidance to promote their further development in scale-up production and commercial applications.

Enhancing Capacity and Stability of Anionic MOFs as Electrode Material by Cation Exchange

In this study we report on the characterization and use of the anionic metal-organic framework (MOF) JUMP-1, [(Me₂NH₂)₂[Co₃(ntb)₂(bdc)]]_n, alongside with its alkali-metal ion-exchanged analogs JUMP-1(Li) and JUMP-1(Na), as electrode materials for lithium and sodium batteries. Composite electrodes containing these anionic-MOFs were prepared and tested in 1 M lithium bis(trifluoromethylsulfonyl)imide (LiTFSI) in propylene carbonate (PC) and/or 1 M sodium TFSI (NaTFSI) in PC. We showed that the ion-exchanged materials JUMP-1(Li) and JUMP-1(Na) display higher capacities in comparison with the original as-prepared compound JUMP-1 (490 mA∙h∙g⁻¹ vs. 164 mA∙h∙g⁻¹ and 83 mA∙h∙g⁻¹ vs. 73 mA∙h∙g⁻¹ in Li and Na based electrolytes, respectively). Additionally, we showed that the stability of the electrodes containing the ion-exchanged materials is higher than that of JUMP-1, suggesting a form of chemical pre-alkalation works to stabilize them prior to cycling. The results of these studies indicate that the use of designed anionic-MOFs represents a promising strategy for the realization of high performance electrodes suitable for energy storage devices.

Multifunctional Anthracene-Based Ni-MOF with Encapsulated Fullerenes: Polarized Fluorescence Emission and Selective Separation of C70 from C60

We report an anthracene-based Ni-MOF [Ni(II) metal-organic framework, {[Ni(μ₂-L)₂Cl₂]·x(C₆H₆)·y(MeOH)}_n (1), L = anthracene-9,10-diylbis(methylene)diisonicotinate] whose crystal structure reveals the presence of hexagonal channels with a pore size of 1.4 nm that can accommodate guests such as C₆₀ and C₇₀. Both confocal fluorescence and Raman microscopy results are in agreement with a homogeneous distribution of fullerenes throughout the single crystals of 1. Efficient energy transfer from 1 to the fullerenes was observed, which emitted partially polarized fluorescence emission. Stronger binding between 1 and C₇₀ versus C₆₀ was confirmed from HPLC analysis of the dissolved material and provides a basis for the selective retention of C₇₀ in liquid chromatography columns packed with 1.

Structures, Fluorescence and Magnetism of a Series of Coordination Polymers Driven by Tricarboxypyridine Ligand

In this study, a tricarboxypyridine ligand 3-((5-carboxypyridin-3-yl)oxy)phthalic acid (H3cppa), that combines three distinct types of functional groups (COOH, O-ether and N-pyridyl) was used to construct metal complexes by hydrothermal reaction,...

Alkali-Metal-Mediated Reversible Chemical Hydrogen Storage Using Seawater

The economic viability and systemic sustainability of a green hydrogen economy are primarily dependent on its storage. However, none of the current hydrogen storage methods meet all the targets set by the US Department of Energy (DoE) for mobile hydrogen storage. One of the most promising routes is through the chemical reaction of alkali metals with water; however, this method has not received much attention owing to its irreversible nature. Herein, we present a reconditioned seawater battery-assisted hydrogen storage system that can provide a solution to the irreversible nature of alkali-metal-based hydrogen storage. We show that this system can also be applied to relatively lighter alkali metals such as lithium as well as sodium, which increases the possibility of fulfilling the DoE target. Furthermore, we found that small (1.75 cm²) and scaled-up (70 cm²) systems showed high Faradaic efficiencies of over 94%, even in the presence of oxygen, which enhances their viability.

Smart Metal-Organic Frameworks for Biotechnological Applications: A Mini-Review

In this pandemic situation it is evident that viruses and bacteria, more specifically, multiple drug resistant (MDR) bacteria, endanger human civilization severely. It is high time to design smart weapons to combat these pathogens for the prevention and cure of allied ailments. Metal-organic frameworks (MOFs) are porous materials designed from metal ions or inorganic clusters and multidentate organic ligands. Due to some unique features like high porosity, tunable pore shape and size, numerous possible metal-ligand combinations, etc., MOFs are ideal candidates to design "smart biotechnological tools". MOFs construct promising fluorescence based biosensing platforms for detection of viruses. MOFs also exhibit excellent antibacterial activity due to their ability for sustained release of active biocidal agents. There are several reviews that summarize the antibacterial applications of MOFs, but the biosensing platforms based on MOFs for detection of viruses have scarcely been summarized. This review carefully covers both the aspects including virus detection (nucleic acid recognition and immunological detection) with underlying mechanisms as well as antibacterial application of MOFs and doped MOFs or composites. This review will deliver valuable information and references for designing new, smarter antimicrobial agents based on MOFs.

Efficient and robust dual modes of fluorescence sensing and smartphone readout for the detection of pyrethroids using artificial receptors bound inside a covalent organic framework

In the study, we have developed an efficient and robust method using dual modes of fluorescence sensing and smartphone readout for the detection of pyrethroids using artificial receptors inside a covalent organic framework. Carbazole-conjugated frameworks (CCFs) were used to prepare efficient fluorescent probes that combine stability with light-emitting activity. CN linkages between aldehydes and amines formed Schiff bases, allowing the development of layered structures, creating exceptionally stable frameworks. Artificial receptors that can bind compounds inside the CCFs with high affinity, for both the detection and absorption of λ-cyhalothrin (LC), were constructed using room-temperature reverse microemulsion polymerization. Under optimum conditions, the fluorescence sensing correlation with the concentration of LC showed good linearity in the range of 0.8-175 μg L^-1 with a detection limit of 0.368 μg L^-1. The smartphone-based visible readout exhibited a good effect, with a detection limit of 4.067 μg L^-1, and recovery of 88 %-103% in food samples. A parallel analysis in food samples was conducted by high-performance liquid chromatography, the results showed good consistency, indicating the practicability of the developed method. Dual mode analysis can avoid the disadvantages of a single response, providing excellent sensitivity, specificity, and efficiency through a strong binding force between the target and the artificial receptors.

Two-Dimensional Polymers and Polymerizations

Synthetic chemists have developed robust methods to synthesize discrete molecules, linear and branched polymers, and disordered cross-linked networks. However, two-dimensional polymers (2DPs) prepared from designed monomers have been long missing from these capabilities, both as objects of chemical synthesis and in nature. Recently, new polymerization strategies and characterization methods have enabled the unambiguous realization of covalently linked macromolecular sheets. Here we review 2DPs and 2D polymerization methods. Three predominant 2D polymerization strategies have emerged to date, which produce 2DPs either as monolayers or multilayer assemblies. We discuss the fundamental understanding and scope of each of these approaches, including: the bond-forming reactions used, the synthetic diversity of 2DPs prepared, their multilayer stacking behaviors, nanoscale and mesoscale structures, and macroscale morphologies. Additionally, we describe the analytical tools currently available to characterize 2DPs in their various isolated forms. Finally, we review emergent 2DP properties and the potential applications of planar macromolecules. Throughout, we highlight achievements in 2D polymerization and identify opportunities for continued study.

Concluding remarks: current and next generation MOFs

This paper describes the content of my "Concluding remarks" talk at the Faraday Discussion meeting on "MOFs for energy and the environment" (online, 23-25 June 2021). The panel consisted of sessions on the design of MOFs and MOF hybrids (synthetic chemistry), their applications (e.g., capture, storage, separation, electrical devices, photocatalysis), advanced characterization (e.g., transmission electron microscopy, solid-state nuclear magnetic resonance), theory and modeling, and commercialization. MOF chemistry is undergoing a significant evolution from simply network chemistry to the chemistry of synergistic integration with heterogeneous materials involving other disciplines (we call this the fourth generation type). As reflected in the papers of the invited speakers and discussions with the participants, the present and future of this field will be described in detail.

Emerging two-dimensional monoelemental materials (Xenes): Fabrication, modification, and applications thereof in the field of bioimaging as nanocarriers

In recent years, more and more research enthusiasm has been devoted to the development of emerging two-dimensional (2D) monoelement materials (Xenes) and explored potential applications in various fields, especially biomedicine and bioimaging. The inspiring results attribute to their excellent physicochemical properties, including adjustable band gap, surface electronic layout characteristics, and so on, making it easier for surface modification in order to meet designated needs. As a popular interdisciplinary research frontier, a variety of methods for fabricating 2D Xenes have recently been adopted for pre-preparing future practical bioimaging applications, which implies that these materials will have broad clinical application prospects in the future. In this review, we will concentrate on the family of 2D Xenes and summarize their fabrication and modification methods firstly. Then, their applications in bioimaging as nanocarriers will be described according to the Periodic Table of Elements. In addition, current challenges and prospects for further clinical applications will be under discussion and use black phosphorus as a typical example. At last, general conclusion will be made that it is worth expecting that 2D Xenes will play a key role in the next generation of oncologic bioimaging in the future. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease Toxicology and Regulatory Issues in Nanomedicine > Toxicology of Nanomaterials Toxicology and Regulatory Issues in Nanomedicine > Regulatory and Policy Issues in Nanomedicine.

Imparting multi-functionality to covalent organic framework nanoparticles by the dual-ligand assistant encapsulation strategy

The potential applications of covalent organic frameworks (COFs) can be further developed by encapsulating functional nanoparticles within the frameworks. However, the synthesis of monodispersed core@shell structured COF nanocomposites without agglomeration remains a significant challenge. Herein, we present a versatile dual-ligand assistant strategy for interfacial growth of COFs on the functional nanoparticles with abundant physicochemical properties. Regardless of the composition, geometry or surface properties of the core, the obtained core@shell structured nanocomposites with controllable shell-thickness are very uniform without agglomeration. The derived bowl-shape, yolk@shell, core@satellites@shell nanostructures can also be fabricated delicately. As a promising type of photosensitizer for photodynamic therapy (PDT), the porphyrin-based COFs were grown onto upconversion nanoparticles (UCNPs). With the assistance of the near-infrared (NIR) to visible optical property of UCNPs core and the intrinsic porosity of COF shell, the core@shell nanocomposites can be applied as a nanoplatform for NIR-activated PDT with deep tissue penetration and chemotherapeutic drug delivery.

Factors Affecting Hydrogen Adsorption in Metal-Organic Frameworks: A Short Review

Metal–organic frameworks (MOFs) have significant potential for hydrogen storage. The main benefit of MOFs is their reversible and high-rate hydrogen adsorption process, whereas their biggest disadvantage is related to their operation at very low temperatures. In this study, we describe selected examples of MOF structures studied for hydrogen adsorption and different factors affecting hydrogen adsorption in MOFs. Approaches to improving hydrogen uptake are reviewed, including surface area and pore volume, in addition to the value of isosteric enthalpy of hydrogen adsorption. Nanoconfinement of metal hydrides inside MOFs is proposed as a new approach to hydrogen storage. Conclusions regarding MOFs with incorporated metal nanoparticles, which may be used as nanoscaffolds and/or H₂ sorbents, are summarized as prospects for the near future.

Highlights of the characterization techniques on inorganic, organic (COF) and hybrid (MOF) photocatalytic semiconductors

This review is dedicated to the brave COVID warriors fighting against the COVID-2019 pandemic.

Metal oxide integrated metal organic frameworks (MO@MOF): rational design, fabrication strategy, characterization and emerging photocatalytic applications

This review focuses on the possible synthesis route, characterization techniques, and mechanistic pathways involved in the photocatalytic applications of MO@MOFs.

Photonic Switching Porous Organic Polymers toward Reversible Control of Heterogeneous Photocatalysis

Sonogashira-Hagihara coupling reaction of photoswitchable dithienylethene (AEDTE) with metal-free 5,10,15,20-tetrakis(4-iodophenyl)porphyrin and its metal derivatives (MTIPP, M = H₂, Zn(II), Fe(II)) results in three porous organic polymers (POPs) including AEDTE-H₂TIPP-POP, AEDTE-ZnTIPP-POP, and AEDTE-FeTIPP-POP. The morphology, components, and structures of newly obtained POPs have been examined by a range of spectroscopic and microscopic techniques including infrared spectroscopy (IR), solid-state UV-vis diffuse reflectance spectroscopy, thermogravimetric analysis (TGA), powder X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. The porous structures have been estimated by nitrogen and carbon dioxide sorption isotherms at 77 and 196 K, respectively. The open-AEDTE-H₂TIPP-POP with AEDTE in an open form was revealed to be an effective and stable heterogeneous photocatalyst for visible light-driven oxidation of N-methylpyridinium salts possibly because of its relatively large specific surface area. In particular, a proof-of-concept of photoswitchable POP photocatalysts has been established using different light irradiation upon open-AEDTE-H₂TIPP-POP to control its heterogeneous photocatalytic behaviors because of the adjustment over the electron transfer process and porous structures through photoisomerization of AEDTE. The present result highlights the bright perspective of photoswitching POPs in the field of materials chemistry and catalysis community.

A study on the self-assembly mode and supramolecular framework of complexes of cucurbit[6]urils and 1-(4-methoxyphenyl)piperazine

Self-assembly between symmetrical dicyclohexyl-substituted cucurbit[6]uril (abbreviated as (CyH)2Q[6]) and cyclopentanocucurbit[6]uril (CyP6Q[6]) as hosts and 1-(4-methoxyphenyl)piperazine (MeOPP) as a guest molecule has been studied by means of single-crystal X-ray diffraction analysis, NMR, MALDI-TOF mass spectrometry, and other characterization methods. The experimental results showed that the self-assembly was driven by the formation of exclusion complexes by the cucurbit[n]uril and the guest, that is, supramolecular interaction between the negative charge of the cucurbit[n]uril portals and a coordination polymer guest. Complexes were formed between the positive charge of the cucurbit[n]uril outer wall and inorganic anions, thus generating self-assemblies with multi-dimensional and multi-level supramolecular frameworks.

Synthesis of Robust MOFs@COFs Porous Hybrid Materials via an Aza-Diels-Alder Reaction: Towards High-Performance Supercapacitor Materials

Metal-organic frameworks (MOFs) and covalent organic frameworks (COFs) have attracted enormous attention in recent years. Recently, MOF@COF are emerging as hybrid architectures combining the unique features of the individual components to enable the generation of materials displaying novel physicochemical properties. Herein we report an unprecedented use of aza-Diels-Alder cycloaddition reaction as post-synthetic modification of MOF@COF-LZU1, to generate aza-MOFs@COFs hybrid porous materials with extended π-delocalization. A a proof-of-concept, the obtained aza-MOFs@COFs is used as electrode in supercapacitors displaying specific capacitance of 20.35 μF cm^-2 and high volumetric energy density of 1.16 F cm^-3 . Our approach of post-synthetic modification of MOFs@COFs hybrids implement rational design for the synthesis of functional porous materials and expands the plethora of promising application of MOFs@COFs hybrid porous materials in energy storage applications.

Recent Progress in Metal-Free Covalent Organic Frameworks as Heterogeneous Catalysts

Covalent organic frameworks (COFs), connecting different organic units into one system through covalent bonds, are crystalline organic porous materials with 2D or 3D networks. Compared with conventional porous materials such as inorganic zeolite, active carbon, and metal-organic frameworks, COFs are a new type of porous materials with well-designed pore structure, high surface area, outstanding stability, and easy functionalization at the molecular level, which have attracted extensive attention in various fields, such as energy storage, gas separation, sensing, photoluminescence, proton conduction, magnetic properties, drug delivery, and heterogeneous catalysis. Herein, the recent advances in metal-free COFs as a versatile platform for heterogeneous catalysis in a wide range of chemical reactions are presented and the synthetic strategy and promising catalytic applications of COF-based catalysts (including photocatalysis) are summarized. According to the types of catalytic reactions, this review is divided into the following five parts for discussion: achiral organic catalysis, chiral organic conversion, photocatalytic organic reactions, photocatalytic energy conversion (including water splitting and the reduction of carbon dioxide), and photocatalytic pollutant degradation. Furthermore, the remaining challenges and prospects of COFs as heterogeneous catalysts are also presented.

Separation Selectivity of CH4/CO2 Gas Mixtures in the ZIF-8 Membrane Explored by Dynamic Monte Carlo Simulations

Here we report a series of nonequilibrium dynamic Monte Carlo simulations combined with dual control volume (DCV-DMC) to explore the separation selectivity of CH₄/CO₂ gas mixtures in the ZIF-8 membrane with a thickness of up to about 20 nm. Meanwhile, an improved DCV-DMC approach coupled with the corresponding potential map (PM-DCV-DMC) is further developed to speed up the computational efficiency of conventional DCV-DMC simulations. Our simulation results provide the molecular-level density and selectivity profiles along the permeation direction of both CH₄ and CO₂ molecules in the ZIF-8 membrane, indicating that the parts near membrane surfaces at both ends play a key role in determining the separation selectivity. All densities initially show a sharp increase in the individual maximum within the first outermost unit cell at the feed side and follow a long fluctuating decrease process. Accordingly, the corresponding selectivity profiles initially display a long fluctuating increase in the individual maximum and follow a sharp decrease near the membrane surface at the permeation side. Furthermore, the effects of feed composition, temperature, and pressure on the relevant separation selectivity are also discussed in detail, where the temperature has a greater influence on the separation selectivity than the feed composition and pressure. More importantly, the predicted separation selectivities from our PM-DCV-DMC simulations are well consistent with previous experimental results.

Nanomaterials with Tailored Magnetic Properties as Adsorbents of Organic Pollutants from Wastewaters

Water quality has become one of the most critical issue of concern worldwide. The main challenge of the scientific community is to develop innovative and sustainable water treatment technologies with high efficiencies and low production costs. In recent years, the use of nanomaterials with magnetic properties used as adsorbents in the water decontamination process has received considerable attention since they can be easily separated and reused. This review focuses on the state-of-art of magnetic core–shell nanoparticles and nanocomposites developed for the adsorption of organic pollutants from water. Special attention is paid to magnetic nanoadsorbents based on silica, clay composites, carbonaceous materials, polymers and wastes. Furthermore, we compare different synthesis approaches and adsorption performance of every nanomaterials. The data gathered in this review will provide information for the further development of new efficient water treatment technologies.

Covalent organic frameworks for separation applications

Covalent organic frameworks (COFs) are an emerging class of crystalline porous polymers with highly tuneable structures and functionalities. COFs have been proposed as ideal materials for applications in the energy-intensive field of molecular separation due to their notable intrinsic features such as low density, exceptional stability, high surface area, and readily adjustable pore size and chemical environment. This review attempts to highlight the key advancements made in the synthesis of COFs for diverse separation applications such as water treatment or the separation of gas mixtures and organic molecules, including chiral and isomeric compounds. Methods proposed for the fabrication of COF-based columns and continuous membranes for practical applications are also discussed in detail. Finally, a perspective regarding the remaining challenges and future directions for COF research in the field of separation has also been presented.

Porous Aromatic Frameworks (PAFs)

Porous aromatic frameworks (PAFs) represent an important category of porous solids. PAFs possess rigid frameworks and exceptionally high surface areas, and, uniquely, they are constructed from carbon-carbon-bond-linked aromatic-based building units. Various functionalities can either originate from the intrinsic chemistry of their building units or are achieved by postmodification of the aromatic motifs using established reactions. Specially, the strong carbon-carbon bonding renders PAFs stable under harsh chemical treatments. Therefore, PAFs exhibit specificity in their chemistry and functionalities compared with conventional porous materials such as zeolites and metal organic frameworks. The unique features of PAFs render them being tolerant of severe environments and readily functionalized by harsh chemical treatments. The research field of PAFs has experienced rapid expansion over the past decade, and it is necessary to provide a comprehensive guide to the essential development of the field at this stage. Regarding research into PAFs, the synthesis, functionalization, and applications are the three most important topics. In this thematic review, the three topics are comprehensively explained and aptly exemplified to shed light on developments in the field. Current questions and a perspective outlook will be summarized.

Self-assembly of block copolymers towards mesoporous materials for energy storage and conversion systems

This paper reviews the progress in the field of block copolymer-templated mesoporous materials, including synthetic methods, morphological and pore size control and their potential applications in energy storage and conversion devices.