Photodriven heterogeneous charge transfer with transition-metal compounds anchored to TiO2 semiconductor surfaces

Unveiling the potential of TPA-based molecules to tune the optoelectronic properties and enhance the efficiency of dye-sensitized solar cells

CONTEXT

The world's energy and environmental requirements are changing due to rapid population growth and industrial growth, and solar cells can be used to meet these demands. Dye-sensitized solar cells (DSSCs) are solar cells in which energy conversion occurs via a process similar to photosynthesis in plants. DSSC development is still in its infancy. DSSCs can operate under cloudy conditions and indirect sunlight and have attracted considerable attention due to their low cost and high efficiency. We designed two metal-free TPA-based dyes (Dye2 and Dye3) based on the reference dye Mg207 (Dye1) by increasing the donor strength of the molecule, as such dyes have shown enhanced efficiency in DSSCs. Moreover, the triphenylamine (TPA) moiety has been demonstrated to be a good donor that prevents charge recombination. Intramolecular charge transfer (ICT) from the donor to acceptor moiety was found in the sensitizers, and electrons were promoted to the conduction band (CB) of the TiO2 semiconductor. The negative binding energy of the dye@TiO2 clusters indicated that dye adsorption on the semiconductor surface was stable. The double donor increased the electron injection and electronic coupling constants in Dye2 and Dye3, indicating that these newly designed dyes have superior charge injection capacity. Accordingly, the efficiencies of DSSCs with Dye2 and Dye3 were 9.77% and 9.62%, respectively, and substitution with the TPA unit at the -R1 and -R2 positions in Dye1 resulted in better power conversion compared to the parent compound (9.09%). Increased donor strength improved photovoltaic performance by increasing current density and light-harvesting efficiency. This is a good molecular design approach for preparing targeted donor- π -acceptor (D- π -A) organic dyes with high DSSC efficiency.

METHODS

To predict the charge transport and optoelectronic characteristics of the TPA dyes, quantum chemical calculations were carried out using Gaussian16. The ground-state (S0) optimized geometries of the sensitizers were computed by utilizing DFT at the B3LYP/6-31G** level. The absorption spectra ( λ max) were computed by employing TD-DFT with various functionals (B3LYP, PBE1PBE, CAM-B3LYP, and BHandHLYP) in the gas and solvent (DCM) phases. Among the studied functionals, BHandHLYP was found to be best at successfully reproducing the experimental data. Thus, the absorption spectra of the newly designed dyes and dye@TiO2 were calculated at the BHandHLYP/6-31G** level. The dye@TiO2 cluster optimizations were carried out at the B3LYP/6-31G**(LANL2DZ) level.

Reductive Dynamic and Static Excited State Quenching of a Homoleptic Ruthenium Complex Bearing Aldehyde Groups

A new homoleptic Ru polypyridyl complex bearing two aldehyde groups on each bipyridine ligand, [Ru(dab)3](PF6)2, where dab is 4,4'-dicarbaldehyde-2,2'-bipyridine, was synthesized, characterized, and utilized for iodide photo-oxidation studies. In acetonitrile (CH3CN) solution, the complex displayed an intense metal-to-ligand charge transfer (MLCT) absorbance maximum at 475 nm (ε = 22,000 M-1 cm-1) and an infrared (IR) band at 1712 cm-1 assigned to the pendent aldehyde groups. Visible light excitation in air-saturated solution resulted in room temperature photoluminescence (PL) with a maximum at 675 nm, a quantum yield, ϕPL = 0.048, and an excited state lifetime, το = 440 ns, from which radiative and nonradiative relaxation rate constants were extracted, kr = 9.1 × 104 s-1 and knr = 1.8 × 106 s-1. Pulsed visible light excitation yielded transient UV-vis and IR absorption spectra consistent with an MLCT excited state; relaxation occurred with the maintenance of two isosbestic points in the visible region, and a lifetime that agreed with that measured by time-resolved PL. Cyclic voltammetry studies in a CH3CN solution with 0.1 M TBAPF6 electrolyte revealed a quasi-reversible oxidation, E°(RuIII/II) = +1.25 V vs. Fc+/0, and three sequential one-electron reductions at -1.10, -1.25, and -1.54 V vs. Fc+/0. An excited state reduction potential of E°(Ru*2+/+) = +0.89 V vs. Fc+/0 was estimated with the Rehm-Weller expression. Titration of tetrabutylammonium iodide, TBAI, into a CD3CN solution of [Ru(dab)3](PF6)2 resulted in significant shifts in the aldehyde H atom and 3,3'-biypridyl resonances that were analyzed with a 1:1 equilibrium model, from which Keq = 460 M-1 was extracted, increasing to 5800 M-1 when the solvent was changed to acetone-d6. Iodide titrations resulted in a significant quenching of the [Ru(dab)3]*2+ lifetime and quantum yield in both CH3CN and acetone solvents. In CH3CN, the quenching was mainly dynamic and well described by the Stern-Volmer model, from which a quenching rate constant, kq, of 4.5 × 1010 M-1 s-1 and an equilibrium constant, Keq, of 8.3 × 103 M-1 were obtained. In acetone, the static quenching pathway by iodide was greatly enhanced, with a Keq of 1.2 × 104 M-1 and a higher kq of 9.2 × 1010 M-1 s-1.

Hot carrier dynamics in metalated porphyrin-naphthalimide thin films

This study employs femtosecond transient absorption spectroscopy to investigate the rapid dynamics of excited state carriers in three metalated porphyrin-naphthalimide (PN) molecules and one free-base molecule. The dynamics of electron injection, from PN to mesoporous titania (TiO2), in PN adsorbed TiO2 films (Ti-PN), were carefully investigated and compared to PN adsorbed ZrO2 films (Zr-PN). In addition, we examined the self-assembled PN films and found that, in their self-assembled state, these molecules exhibited a longer relaxation time than Zr-PN monomeric films, where the charge injection channel was insignificant. The ground-state bleach band in the Ti-PN films gradually shifted to longer wavelengths, indicating the occurrence of the Stark effect. Faster electron injection was observed for the metalated PN systems and the electron injection times from the various excited states to the conduction band of TiO2 (CB-TiO2) were obtained from the target model analysis of the transient absorption spectra data matrix. In these metal-organic complexes, hot electron injection from PN to CB-TiO2 occurred on a time scale of <360 fs. Importantly, Cu(II)-based PN complexes exhibited faster injection and longer recombination times. The injection times have been estimated to result from a locally excited state at ≈280 fs, a hot singlet excited state at 4.95 ps, and a vibrationally relaxed singlet excited state at 97.88 ps. The critical photophysical and charge injection processes seen here provide the potential for exploring the underlying factors involved and how they correlate with photocatalytic performance.

Suppression of Charge Recombination by Vertical Arrangement of A Donor Moiety on Flat Planar Dyes for Efficient Dye-Sensitized Solar Cells

In dye-sensitized solar cells (DSSCs), flat planar dyes (e. g., highly light-harvesting porphyrins and corroles) with multiple anchoring groups are known to adopt a horizontal orientation on TiO2 through the multiple binding to TiO2. Due to the strong electronic coupling between the dye and TiO2, fast charge recombination between the oxidized dye and an electron in TiO2 occurs, lowering the power conversion efficiency (η). To overcome this situation, an additional donor moiety can be placed on top of the planar dye on TiO2 to slow down the undesirable charge recombination. Here we report the synthesis and photovoltaic properties of a triarylamine (TAA)-tethered gold(III) corrole (TAA-AuCor). The DSSC with TAA-AuCor using iodine redox shuttle exhibited the highest η-value among corrole-based DSSCs, which is much higher than that with the reference AuCor. The transient absorption spectroscopies clearly demonstrated that fast electron transfer from the TAA moiety to the corrole radical cation in TAA-AuCor competes with the undesirable charge recombination to generate long-lived charge separated state TAA⋅+-Cor/TiO2⋅- efficiently. Consequently, the introduction of the TAA moiety enhanced the η-value remarkably, demonstrating the usefulness of our new concept to manipulate charge-separated states toward highly efficient DSSCs.

Deciphering Photoinduced Catalytic Reaction Mechanisms in Natural and Artificial Photosynthetic Systems on Multiple Temporal and Spatial Scales Using X-ray Probes

Utilization of renewable energies for catalytically generating value-added chemicals is highly desirable in this era of rising energy demands and climate change impacts. Artificial photosynthetic systems or photocatalysts utilize light to convert abundant CO2, H2O, and O2 to fuels, such as carbohydrates and hydrogen, thus converting light energy to storable chemical resources. The emergence of intense X-ray pulses from synchrotrons, ultrafast X-ray pulses from X-ray free electron lasers, and table-top laser-driven sources over the past decades opens new frontiers in deciphering photoinduced catalytic reaction mechanisms on the multiple temporal and spatial scales. Operando X-ray spectroscopic methods offer a new set of electronic transitions in probing the oxidation states, coordinating geometry, and spin states of the metal catalytic center and photosensitizers with unprecedented energy and time resolution. Operando X-ray scattering methods enable previously elusive reaction steps to be characterized on different length scales and time scales. The methodological progress and their application examples collected in this review will offer a glimpse into the accomplishments and current state in deciphering reaction mechanisms for both natural and synthetic systems. Looking forward, there are still many challenges and opportunities at the frontier of catalytic research that will require further advancement of the characterization techniques.

Iron(III) Carbene Complexes with Tunable Excited State Energies for Photoredox and Upconversion

Substituting precious elements in luminophores and photocatalysts by abundant first-row transition metals remains a significant challenge, and iron continues to be particularly attractive owing to its high natural abundance and low cost. Most iron complexes known to date face severe limitations due to undesirably efficient deactivation of luminescent and photoredox-active excited states. Two new iron(III) complexes with structurally simple chelate ligands enable straightforward tuning of ground and excited state properties, contrasting recent examples, in which chemical modification had a minor impact. Crude samples feature two luminescence bands strongly reminiscent of a recent iron(III) complex, in which this observation was attributed to dual luminescence, but in our case, there is clear-cut evidence that the higher-energy luminescence stems from an impurity and only the red photoluminescence from a doublet ligand-to-metal charge transfer (2LMCT) excited state is genuine. Photoinduced oxidative and reductive electron transfer reactions with methyl viologen and 10-methylphenothiazine occur with nearly diffusion-limited kinetics. Photocatalytic reactions not previously reported for this compound class, in particular the C-H arylation of diazonium salts and the aerobic hydroxylation of boronic acids, were achieved with low-energy red light excitation. Doublet-triplet energy transfer (DTET) from the luminescent 2LMCT state to an anthracene annihilator permits the proof of principle for triplet-triplet annihilation upconversion based on a molecular iron photosensitizer. These findings are relevant for the development of iron complexes featuring photophysical and photochemical properties competitive with noble-metal-based compounds.

Hollow anatase TiO2 tetrakaidecahedral crystals with an active {001}/{110} redox interface toward high-performance photocatalytic activity

The existence of the oxidation/reduction interface can promote the performance of a photocatalyst, due to its effect on the separation of photogenerated carriers and the surface reactivity. However, it is difficult to construct two sets of oxidation/reduction interfaces in a single crystal and compare their separation efficiency for photogenerated carriers. Introducing a high proportion of active facets into the co-exposed facets is even more challenging. Herein, a hollow anatase TiO2 tetrakaidecahedron (HTT) with two sets of oxidation/reduction interfaces ({001}/{101} and {001}/{110}) is synthesized by directional chemical etching. Theoretical and experimental results indicate that the {001}/{110} interface is a dominant oxidation/reduction interface, showing a better promotion on the separation of photogenerated carriers than the {001}/{101} interface. In the HTT, the ratio of dominant {001}/(110) is increased and the proportion of the active {110} facet is about 40% (generally about 15%). Therefore, the HTT shows excellent catalytic activity for photocatalytic reductive (hydrogen production) and oxidative (selective oxidation of sulfides) reactions. The HTT also demonstrates favorable photocatalytic activity for the cross-dehydrogenative coupling reaction, where both photogenerated electrons and photogenerated holes are involved, further verifying its high separation efficiency of photogenerated carriers and surface reactivity. This work provides an important guideline for developing advanced structures with a predetermined interface toward desired applications.

In the View of Electrons Transfer and Energy Conversion: The Antimicrobial Activity and Cytotoxicity of Metal-Based Nanomaterials and Their Applications

The global pandemic and excessive use of antibiotics have raised concerns about environmental health, and efforts are being made to develop alternative bactericidal agents for disinfection. Metal-based nanomaterials and their derivatives have emerged as promising candidates for antibacterial agents due to their broad-spectrum antibacterial activity, environmental friendliness, and excellent biocompatibility. However, the reported antibacterial mechanisms of these materials are complex and lack a comprehensive understanding from a coherent perspective. To address this issue, a new perspective is proposed in this review to demonstrate the toxic mechanisms and antibacterial activities of metal-based nanomaterials in terms of energy conversion and electron transfer. First, the antimicrobial mechanisms of different metal-based nanomaterials are discussed, and advanced research progresses are summarized. Then, the biological intelligence applications of these materials, such as biomedical implants, stimuli-responsive electronic devices, and biological monitoring, are concluded based on trappable electrical signals from electron transfer. Finally, current improvement strategies, future challenges, and possible resolutions are outlined to provide new insights into understanding the antimicrobial behaviors of metal-based materials and offer valuable inspiration and instructional suggestions for building future intelligent environmental health.

Watching the Interplay between Photoinduced Ultrafast Charge Dynamics and Nuclear Vibrations

Here is presented the ultrafast hole-electron dynamics of photoinduced metal to ligand charge-transfer (MLCT) states in a Ru(II) complex, [Ru(dcbpy)2(NCS)2]4- (dcbpy = 4,4'-dicarboxy-2,2'-bipyridine), a photoactive molecule employed in dye sensitized solar cells. Via cutting-edge computational techniques, a tailored computational protocol is here presented and developed to provide a detailed analysis of the electronic manifold coupled with nuclear vibrations to better understand the nonradiative pathways and the resulting overall dye performances in light-harvesting processes (electron injection). Thus, the effects of different vibrational modes were investigated on both the electronic levels and charge transfer dynamics through a theoretical-computational approach. First, the linear response time-dependent density functional (LR-TDDFT) formalism was employed to characterize excitation energies and spacing among electronic levels (the electronic layouts). Then, to understand the ultrafast (femtosecond) charge dynamics on the molecular scale, we relied on the nonperturbative mean-field quantum electronic dynamics via real-time (RT-) TDDFT. Three vibrational modes were selected, representative for collective nuclear movements that can have a significant influence on the electronic structure: two involving NCS- ligands and one involving dcbpy ligands. As main results, we observed that such MLCT states, under vibrational distortions, are strongly affected and a faster interligand electron transfer mechanism is observed along with an increasing MLCT character of the adiabatic electronic states approaching closer in energy due to the vibrations. Such findings can help both in providing a molecular picture of multidimensional vibro-electronic spectroscopic techniques, used to characterize ultrafast coherent and noncoherent dynamics of complex systems, and to improve dye performances with particular attention to the study of energy or charge transport processes and vibronic couplings.

Modulation of ground and excited state properties of ruthenium complexes through sequential incorporation of metal into a polypyridyl-imidazole bridging ligand

A polypyridyl-imidazole-based bridging ligand, 2-(4-(4,5-di(pyridine-2-yl)-1H-imidazole-2-yl)phenyl)-1H-imidazo[4,5-f][1,10]phenanthroline (phen-H2PhImz-bpy), possessing three bidentate coordinating sites, has been designed in this work. The bridging ligand is employed to synthesize mono-, bi-, and trimetallic Ru(II) complexes in combination with terminal bipyridine units for the systematic modulation of photophysical and redox properties upon sequential incorporation of the metal unit into the bridge. All the compounds are characterized via NMR spectroscopy and electrospray ionization mass spectrometry. Absorption and both steady-state and time-resolved emission spectroscopic investigations of the ligand as well as Ru(II) complexes are thoroughly conducted in different solvents. The redox behaviors of the complexes are examined through cyclic voltammetry (CV) in acetonitrile. The focus of the investigation is centered on the systematic modulation of MLCT absorption and emission as well as the redox behavior of the complex entity upon the gradual incorporation of the Ru2+ unit into the complex backbone. The emission energy, quantum yield and lifetime are found to decrease systematically with an increase in the Ru2+ unit in the complex backbone and a linear relationship is observed in each case. A good correlation is also observed between the emission energies of complexes with their respective ΔE1/2 values (the difference between the first oxidation and first reduction potential).

Nanographene-Based Decoration as a Panchromatic Antenna for Metalloporphyrin Conjugates

Porphyrins, a type of heterocyclic aromatic compounds consisting of tetrapyrroles connected by four substituted methine groups, are appealing building blocks for solar energy applications. However, their photosensitization capability is limited by their large optical energy gap, which results in a mismatch in absorption toward efficient harvesting of the solar spectrum. Porphyrin π-extension by edge-fusing with nanographenes can be employed for narrowing their optical energy gap from 2.35 to 1.08 eV, enabling the development of porphyrin-based panchromatic dyes with an optimized energy onset for solar energy conversion in dye-sensitized solar fuel and solar cell configurations. By combining time-dependent density functional theory with fs transient absorption spectroscopy, it is found that the primary singlets, which are delocalized across the entire aromatic part, are transferred into metal centred triplets in only 1.2 ps; and subsequently, relax toward ligand-delocalized triplets. This observation implies that the decoration of the porphyrin moiety with nanographenes, while having a large impact on the absorption onset of the novel dye, promotes the formation of a ligand-centred lowest triplet state of large spatial extension, potentially interesting for boosting interactions with electron scavengers. These results reveal a design strategy for broadening the applicability of porphyrin-based dyes in optoelectronics.

Multimodal Biofilm Inactivation Using a Photocatalytic Bismuth Perovskite-TiO2-Ru(II)polypyridyl-Based Multisite Heterojunction

Infectious bacterial biofilms are recalcitrant to most antibiotics compared to their planktonic version, and the lack of appropriate therapeutic strategies for mitigating them poses a serious threat to clinical treatment. A ternary heterojunction material derived from a Bi-based perovskite-TiO₂ hybrid and a [Ru(2,2'-bpy)₂(4,4'-dicarboxy-2,2'-bpy)]²⁺ (2,2'-bpy, 2,2'-bipyridyl) as a photosensitizer (RuPS) is developed. This hybrid material is found to be capable of generating reactive oxygen species (ROS)/reactive nitrogen species (RNS) upon solar light irradiation. The aligned band edges and effective exciton dynamics between multisite heterojunctions are established by steady-state/time-resolved optical and other spectroscopic studies. Proposed mechanistic pathways for the photocatalytic generation of ROS/RNS are rationalized based on a cascade-redox processes arising from three catalytic centers. These ROS/RNS are utilized to demonstrate a proof-of-concept in treating two elusive bacterial biofilms while maintaining a high level of biocompatibility (IC₅₀ > 1 mg/mL). The in situ generation of radical species (ROS/RNS) upon photoirradiation is established with EPR spectroscopic measurements and colorimetric assays. Experimental results showed improved efficacy toward biofilm inactivation of the ternary heterojunction material as compared to their individual/binary counterparts under solar light irradiation. The multisite heterojunction formation helped with better exciton delocalization for an efficient catalytic biofilm inactivation. This was rationalized based on the favorable exciton dissociation followed by the onset of multiple oxidation and reduction sites in the ternary heterojunction. This together with exceptional photoelectric features of lead-free halide perovskites outlines a proof-of-principle demonstration in biomedical optoelectronics addressing multimodal antibiofilm/antimicrobial modality.

Active Learning Exploration of Transition-Metal Complexes to Discover Method-Insensitive and Synthetically Accessible Chromophores

Transition-metal chromophores with earth-abundant transition metals are an important design target for their applications in lighting and nontoxic bioimaging, but their design is challenged by the scarcity of complexes that simultaneously have well-defined ground states and optimal target absorption energies in the visible region. Machine learning (ML) accelerated discovery could overcome such challenges by enabling the screening of a larger space but is limited by the fidelity of the data used in ML model training, which is typically from a single approximate density functional. To address this limitation, we search for consensus in predictions among 23 density functional approximations across multiple rungs of "Jacob's ladder". To accelerate the discovery of complexes with absorption energies in the visible region while minimizing the effect of low-lying excited states, we use two-dimensional (2D)efficient global optimization to sample candidate low-spin chromophores from multimillion complex spaces. Despite the scarcity (i.e., ∼0.01%) of potential chromophores in this large chemical space, we identify candidates with high likelihood (i.e., >10%) of computational validation as the ML models improve during active learning, representing a 1000-fold acceleration in discovery. Absorption spectra of promising chromophores from time-dependent density functional theory verify that 2/3 of candidates have the desired excited-state properties. The observation that constituent ligands from our leads have demonstrated interesting optical properties in the literature exemplifies the effectiveness of our construction of a realistic design space and active learning approach.

Redox Shuttle-Based Electrolytes for Dye-Sensitized Solar Cells: Comprehensive Guidance, Recent Progress, and Future Perspective

A redox electrolyte is a crucial part of dye-sensitized solar cells (DSSCs), which plays a significant role in the photovoltage and photocurrent of the DSSCs through efficient dye regeneration and minimization of charge recombination. An I^-/I₃ ^- redox shuttle has been mostly utilized, but it limits the open-circuit voltage (V _oc) to 0.7-0.8 V. To improve the V _oc value, an alternative redox shuttle with more positive redox potential is required. Thus, by utilizing cobalt complexes with polypyridyl ligands, a significant power conversion efficiency (PCE) of above 14% with a high V _oc of up to 1 V under 1-sun illumination was achieved. Recently, the V _oc of a DSSC has exceeded 1 V with a PCE of around 15% by using Cu-complex-based redox shuttles. The PCE of over 34% in DSSCs under ambient light by using these Cu-complex-based redox shuttles also proves the potential for the commercialization of DSSCs in indoor applications. However, most of the developed highly efficient porphyrin and organic dyes cannot be used for the Cu-complex-based redox shuttles due to their higher positive redox potentials. Therefore, the replacement of suitable ligands in Cu complexes or an alternative redox shuttle with a redox potential of 0.45-0.65 V has been required to utilize the highly efficient porphyrin and organic dyes. As a consequence, for the first time, the proposed strategy for a PCE enhancement of over 16% in DSSCs with a suitable redox shuttle is made by finding a superior counter electrode to enhance the fill factor and a suitable near-infrared (NIR)-absorbing dye for cosensitization with the existing dyes to further broaden the light absorption and enhance the short-circuit current density (J _sc) value. This review comprehensively analyzes the redox shuttles and redox-shuttle-based liquid electrolytes for DSSCs and gives recent progress and perspectives.

Nature of the Ultrafast Interligands Electron Transfers in Dye-Sensitized Solar Cells

Charge-transfer dynamics and interligand electron transfer (ILET) phenomena play a pivotal role in dye-sensitizers, mostly represented by the Ru-based polypyridyl complexes, for TiO₂ and ZnO-based solar cells. Starting from metal-to-ligand charge-transfer (MLCT) excited states, charge dynamics and ILET can influence the overall device efficiency. In this letter, we focus on N3^4- dye ( [Ru(dcbpy)₂(NCS)₂]^4-, dcbpy = 4,4'-dicarboxy-2,2'-bipyridine) to provide a first direct observation with high time resolution (<20 fs) of the ultrafast electron exchange between bpy-like ligands. ILET is observed in water solution after photoexcitation in the ∼400 nm MLCT band, and assessment of its ultrafast time-scale is here given through a real-time electronic dynamics simulation on the basis of state-of-the-art electronic structure methods. Indirect effects of water at finite temperature are also disentangled by investigating the system in a symmetric gas-phase structure. As main result, remarkably, the ILET mechanism appears to be based upon a purely electronic evolution among the dense, experimentally accessible, MLCT excited states manifold at ∼400 nm, which rules out nuclear-electronic couplings and proves further the importance of the dense electronic manifold in improving the efficiency of dye sensitizers in solar cell devices.

Understanding Charge Dynamics in Dense Electronic Manifolds in Complex Environments

Photoinduced charge transfer (CT) excited states and their relaxation mechanisms can be highly interdependent on the environment effects and the consequent changes in the electronic density. Providing a molecular interpretation of the ultrafast (subpicosecond) interplay between initial photoexcited states in such dense electronic manifolds in condensed phase is crucial for improving and understanding such phenomena. Real-time time-dependent density functional theory is here the method of choice to observe the charge density, explicitly propagated in an ultrafast time domain, along with all time-dependent properties that can be easily extracted from it. A designed protocol of analysis for real-time electronic dynamics to be applied to time evolving electronic density related properties to characterize both in time and in space CT dynamics in complex systems is here introduced and validated, proposing easy to be read cross-correlation maps. As case studies to test such tools, we present the photoinduced charge-transfer electronic dynamics of 5-benzyluracil, a mimic of nucleic acid/protein interactions, and the metal-to-ligand charge-transfer electronic dynamics in water solution of [Ru(dcbpy)2(NCS)2]4-, dcbpy = (4,4'-dicarboxy-2,2'-bipyridine), or "N34-", a dye sensitizer for solar cells. Electrostatic and explicit ab initio treatment of solvent molecules have been compared in the latter case, revealing the importance of the accurate modeling of mutual solute-solvent polarization on CT kinetics. We observed that explicit quantum mechanical treatment of solvent slowed down the charge carriers mobilities with respect to the gas-phase. When all water molecules were modeled instead as simpler embedded point charges, the electronic dynamics appeared enhanced, with a reduced hole-electron distance and higher mean velocities due to the close fixed charges and an artificially increased polarization effect. Such analysis tools and the presented case studies can help to unveil the influence of the electronic manifold, as well as of the finite temperature-induced structural distortions and the environment on the ultrafast charge motions.

Naphthoquinoneoxime-Sensitized Titanium Dioxide Photoanodes: Photoelectrochemical Properties

Naphthoquinoneoxime derivatives, viz., LwOx, 3-hydroxy-4-(hydroxyimino)naphthalen-1 (4H)-one; PthOx, 3-hydroxy-4-(hydroxyimino)-2-methylnaphthalen-1(4H)-one; and Cl_LwOx, 2-chloro-3-hydroxy-4-(hydroxyimino)naphthalen-1(4H)-one, are used in fabrication of dye-sensitized solar cells (DSSCs). The photophysical and electrochemical properties of the sensitizers were studied. The HOMO-LUMO energy gaps of the sensitizers (LwOx, PthOx, and Cl_LwOx) calculated by using the intersection of UV-visible and fluorescence spectra are 2.85, 2.71, and 2.87 eV, respectively. The energy band alignment energy level of the sensitizer, that is, the lowest unoccupied molecular orbital (LUMO) and highest occupied molecular orbital (HOMO), should match with the energy level of the TiO₂ conduction band and the redox potential of iodine/triiodide electrolyte to allow smooth electron transfer. The electrochemical characterization of sensitizers was done to find the LUMO and HOMO level of the sensitizer. It shows that the LUMO level of (LwOx, PthOx, and Cl_LwOx) is above the conduction band position of TiO₂. Electrochemical impedance spectroscopy was used to study the charge transport resistance and electron lifetime of DSSCs. The charge transport resistance at the TiO₂ |electrolyte|counter electrode interface was reduced in the Cl_LwOx device; thus, the electron lifetime of Cl_LwOx was enhanced compared to LwOx and PthOx sensitizers. The fabricated device was characterized using photocurrent density-voltage (J-V) measurement. It is observed that there was an enhancement in the overall power conversion efficiency (η) of the DSSCs fabricated by using Cl_LwOx sensitizers as compared to LwOx and PthOx sensitizer-loaded photoanodes. Enhancement in power conversion efficiency, that is, photovoltage and photocurrent, is achieved due to the chlorine substituent. Thus, the chlorine substituent naphthoquinoneoxime pushes the electron density, enhancing the pushing nature and facilitating the lone pair present in the N-OH moiety to attach to TiO₂ more strongly.

Cavity-Free Quantum-Electrodynamic Electron Transfer Reactions

Richard Feynman stated that "The theory behind chemistry is quantum electrodynamics". However, harnessing quantum-electrodynamic (QED) effects to modify chemical reactions is a grand challenge and currently has only been reported in experiments using cavities due to the limitation of strong light-matter coupling. In this article, we demonstrate that QED effects can significantly enhance the rate of electron transfer (ET) by several orders of magnitude in the absence of cavities, which is implicitly supported by experimental reports. To understand how cavity-free QED effects are involved in ET reactions, we incorporate the effect of infinite one-photon states into Marcus theory, derive an explicit expression for the rate of radiative ET, and develop the concept of "electron transfer overlap". Moreover, QED effects may lead to a barrier-free ET reaction whose rate is dependent on the energy-gap power law. This study thus provides new insights into fundamental chemical principles, with promising prospects for QED-based chemical reactions.

Experimental and Computational Studies on Bio-Inspired Flavylium Salts as Sensitizers for Dye-Sensitized Solar Cells

Six new bio-inspired flavylium salts were synthesized and investigated by a combined computational and experimental study for dye-sensitized solar cell applications. The compounds were characterized by FT-IR, UV-Vis, NMR spectroscopy, and LC-MS spectrometry techniques. The pH-dependent photochromic properties of the flavylium dyes were investigated through a UV-Vis spectroscopy study and revealed that they follow the same network of chemical reactions as anthocyanins upon pH changes. The structural and electronic properties of the dyes were investigated using density functional theory (DFT) and time-dependent density functional theory (TD-DFT). Geometry optimization calculation revealed that all dyes, regardless of the specie, flavylium cations or quinoidal bases, present a planar geometry. The photovoltaic performances of the dyes, in both flavylium and quinoidal base forms, were evaluated by the HOMO and LUMO energies and by calculating the light-harvesting efficiencies, the free energy change of electron injection, and the free energy change regeneration. The MO analysis showed that all dyes can inject electrons into the conduction band of the TiO₂ upon excitation and that the redox couple can regenerate the oxidized dyes. The results obtained for the free energy change of electron injection suggest that the quinoidal bases should inject electrons into the semiconductor more efficiently than the flavylium cations. The values for the free energy change regeneration showed that the redox electrolyte can easily regenerate all dyes. Dipole moment analysis was also performed. DSSCs based on the dyes, in both flavylium and quinoidal base forms, were assembled, and their photovoltaic performances were evaluated by measuring the open-circuit voltage, the short circuit current density, the fill factor, and the energy conversion efficiency. Results obtained by both experimental and computational studies showed that the overall performances of the DSSCs with the quinoidal forms were better than those obtained with the flavylium cations dyes.

A double co-sensitization strategy using heteroleptic transition metal ferrocenyl dithiocarbamate phenanthrolene-dione for enhancing the performance of N719-based DSSCs

Three new heteroleptic dithiocarbamate complexes with formula [M(Phen-dione)(Fcdtc)]PF₆ (where M = Ni(ii) Ni-Fc, Cu(ii) Cu-Fc) and [Co(Phen-dione)(Fcdtc)₂]PF₆ (Co-Fc) (Fcdtc = N-ethanol-N-methylferrocene dithiocarbamate and Phen-dione = 1,10-phenanthroline-5,6-dione; PF₆ ^- = hexafluorophosphate) were synthesized and characterized using microanalysis, FTIR, electronic absorption spectroscopy and mass spectrometry. The solution state electronic absorption spectroscopy for all three complexes displayed a band at ∼430 nm corresponding to the ferrocene unit and another low-intensity band in the visible region arising because of the d-d transitions. These newly synthesized complexes were used as co-sensitizers for the state-of-the-art di-tetrabutylammonium cis-bis(isothiocyanato)bis(2,2'-bipyridyl-4,4'-dicarboxylato)ruthenium(ii) (N719) dye in dye-sensitized solar cells (DSSCs). Among the three co-sensitizers/co-adsorbent-based DSSC set-ups, the assembly fabricated using Co-Fc/N719 displayed good photovoltaic performance with 5.31% efficiency (η) while a new triple component strategy inculcating N719, Co-Fc and Cu-Fc dyes offered the best photovoltaic performance with 6.05% efficiency (η) with incident photon to current conversion efficiency (IPCE) of 63%. This indicated an upliftment of the DSSC performance by ∼38% in comparison to the set-up constructed by employing only N719 dye (η = 4.39%) under similar experimental conditions.

Dual-electron-enhanced effect in K-doped MoS2 few layers for high electrocatalytic activity as the counter electrode in dye-sensitized solar cells

Designing counter electrodes (CEs) with high efficiency and understanding the mechanism of dye-sensitized solar cells (DSSCs) are still challenges. In this paper, we synthesized K-doped molybdenum disulfide (K-MoS₂) with few layers and it has a great enhancement effect on the electrocatalytic activity compared to pure MoS₂ CE and reference Pt CE. A dual electron-path model is proposed to explain the mechanism, which is supported by first-principles calculations. When an electron in MoS₂ is transferred to the triiodide, the K atoms can act as an electron reservoir to provide another electron in a short time to improve the catalytic activity. So the proposed dual-electron effect in this paper is helpful to understand the charge transfer mechanism on the interfaces of these CEs and may be crucial for obtaining high photoelectric efficiencies in DSSCs.

Synthesis of Novel Triphenylamine-Based Organic Dyes with Dual Anchors for Efficient Dye-Sensitized Solar Cells

A new series of metal-free organic dyes (SM1-5) with dual anchors are synthesized for application in dye-sensitized solar cells (DSSC). Here, a simple triphenylamine (TPA) moiety serves as the electron donor, while di-cyanoacrylamide and di-thiazolidine-5-one units serve as the electron acceptors and anchoring groups. To understand the effect of dye structure on the photovoltaic characteristics of DSSCs, the photophysical and electrochemical properties, as well as molecular geometries calculated from density functional theory (DFT), are used for dyes SM1-5. The extinction coefficients of the organic dyes SM1-5 are high (5.36-9.54 10⁴ M^-1 cm^-1), indicating a high aptitude for light harvesting. The photovoltaic studies indicated that using dye SM4 as a sensitizer showed a power conversion efficiency (PCE) of 6.09% (J_SC = 14.13 mA cm^-2, V_OC = 0.624 V, FF = 68.89%). Interestingly, SM4 showed the highest values of V_OC among all dyes, including N-719, due to its maximum dye coverage on the TiO₂ surface, enhancing charge recombination resistance in the sensitized cell. The good agreement between the theoretically and experimentally obtained data indicates that the energy functional and basis set employed in this study can be successfully utilized to predict new photosensitizers' absorption spectra with great precision before synthesis. Also, these results show that bi-anchoring molecules have a lot of potentials to improve the overall performance of dye-sensitized solar cells.

Shedding Light on the Oxidizing Properties of Spin-Flip Excited States in a CrIII Polypyridine Complex and Their Use in Photoredox Catalysis

The photoredox activity of well-known Ru^II complexes stems from metal-to-ligand charge transfer (MLCT) excited states, in which a ligand-based electron can initiate chemical reductions and a metal-centered hole can trigger oxidations. Cr^III polypyridines show similar photoredox properties, although they have fundamentally different electronic structures. Their photoactive excited state is of spin-flip nature, differing from the electronic ground state merely by a change of one electron spin, but with otherwise identical d-orbital occupancy. We find that the driving-force dependence for photoinduced electron transfer from 10 different donors to a spin-flip excited state of a Cr^III complex is very similar to that for a Ru^II polypyridine, and thereby validate the concept of estimating the redox potential of d³ spin-flip excited states in analogous manner as for the MLCT states of d⁶ compounds. Building on this insight, we use our Cr^III complex for photocatalytic reactions not previously explored with this compound class, including the aerobic bromination of methoxyaryls, oxygenation of 1,1,2,2-tetraphenylethylene, aerobic hydroxylation of arylboronic acids, and the vinylation of N-phenyl pyrrolidine. This work contributes to understanding the fundamental photochemical properties of first-row transition-metal complexes in comparison to well-explored precious-metal-based photocatalysts.

1,2,4-Triazine-based Materials: Spectroscopic Investigation, DFT, NBO, and TD-DFT Calculations as Well As Dye-sensitized Solar Cells Applications

In this manuscript, we report four series for 1,2,4-triazine derivatives as dye-sensitized solar cells (DSSCs). Density functional theory (DFT) methods via utilizing Becke's three-parameter functional and LeeeYangeParr functional (B3LYP) level with 6-31G (d, p) basis set to investigate their modeling molecular structures. Optimized molecular structures for studied molecular structures are obtained using the DFT/B3LYP/6-31G (d, p) method. In addition, the time-dependant density functional theory (TD-DFT) is used to study the optoelectronic properties and absorption spectra using DFT/CAM-B3LYP/ 6-31G +  + (d, p) level in the Gaussian 09 program. The highest occupied molecular orbital (HOMO), lowest unoccupied molecular orbital (LUMO), energy gap (E_g), light harvest efficiency (LHE), and open-circuit voltage (Voc) of the studied molecular structures are calculated and illustrated. These properties indicate that these molecular modeling structures as good candidates for utilization in organic DSSCs.

Understanding the "Anti-Catalyst" Effect with Added CoOx Water Oxidation Catalyst in Dye-Sensitized Photoelectrolysis Cells: Carbon Impurities in Nanostructured SnO2 Are the Culprit

In 2017, we reported a dye-sensitized, photoelectrolysis cell consisting of fluorine-doped tin oxide (FTO)-coated glass covered by SnO₂ nanoparticles coated with N,N'-bis(phosphonomethyl)-3,4,9,10-perylenediimide (PMPDI) dye and then a photoelectrochemically deposited CoO_x water oxidation catalyst (WOCatalyst), FTO/nano-SnO₂/PMPDI/CoO_x. This system employed nanostructured SnO₂ stabilized by a polyethyleneglycol bisphenol A epichlorohydrin (PEG-BAE) copolymer and other C-containing additives based on a literature synthesis to achieve a higher surface area and thus greater PMPDI dye absorption and resultant light collection. Surprisingly, the addition of the well-established WOCatalyst CoO_x resulted in a decrease in the photocurrent, an unexpected "anti-catalyst" effect. Two primary questions addressed in the present study are (1) what is the source of this "anti-catalyst" effect? and (2) are the findings of broader interest? Reflection on the synthesis of nano-SnO₂ stabilized by PEG-BAE, and the large, ca. 10:1 ratio of C to Sn in synthesis, led to the hypothesis that even the annealing step at 450 °C in of the FTO/SnO₂ anode precursors was unlikely to remove all the carbon initially present. Indeed, residual carbon impurities are shown to be the culprit in the presently observed "anti-catalyst" effect. The implication and anticipated broader impact of the results of answering the two abovementioned questions are also presented and discussed along with a section entitled "Perspective and Suggestions for the Field Going Forward."

Robust ΔSCF calculations with direct energy functional minimization methods and STEP for molecules and materials

The direct energy functional minimization method using the orbital transformation (OT) scheme in the program package CP2K has been employed for Δ self-consistent field (ΔSCF) calculations. The OT method for non-uniform molecular orbitals occupations allows us to apply the ΔSCF method for various kinds of molecules and periodic systems. Vertical excitation energies of heteroaromatic molecules and condensed phase systems, such as solvated ethylene and solvated uracil obeying periodic boundary conditions, are reported using the ΔSCF method. In addition, a Re-phosphate molecule attached to the surface of anatase (TiO₂) has been investigated. Additionally, we have implemented a recently proposed state-targeted energy projection ΔSCF algorithm [K. Carter-Fenk and J. M. Herbert, J. Chem. Theory Comput. 16(8), 5067-5082 (2020)] for diagonalization based SCF in CP2K. It is found that the OT scheme provides a smooth and robust SCF convergence for all investigated excitation energies and (non-)periodic systems.

Spin–vibronic coupling in the quantum dynamics of a Fe(III) trigonal-bipyramidal complex

The presence of a high density of excited electronic states in the immediate vicinity of the optically bright state of a molecule paves the way for numerous photo-relaxation channels. In transition-metal complexes, the presence of heavy atoms results in a stronger spin–orbit coupling, which enables spin forbidden spin-crossover processes to compete with the spin-allowed internal conversion processes. However, no matter how effectively the states cross around the Franck–Condon region, the degree of vibronic coupling, of both relativistic and non-relativistic nature, drives the population distribution among these states. One such case is demonstrated in this work for the intermediate-spin Fe(III) trigonal-bipyramidal complex. A quantum dynamical investigation of the photo-deactivation mechanism in the Fe(III) system is presented using the multi-configurational time-dependent Hartree approach based on the vibronic Hamiltonian whose coupling terms are derived from the state-averaged complete active space self-consistent field/complete active space with second-order perturbation theory (CASPT2) calculations and spin–orbit coupling of the scalar-relativistic CASPT2 states. The results of this study show that the presence of a strong (non-relativistic) vibronic coupling between the optically bright intermediate-spin state and other low-lying states of the same spin-multiplicity overpowers the spin–orbit coupling between the intermediate-spin and high-spin states, thereby lowering the chances of spin-crossover while exhibiting ultrafast relaxation among the intermediate-spin states. In a special case, where the population transfer pathway via the non-relativistic vibronic coupling is blocked, the probability of the spin-crossover is found to increase. This suggests that a careful modification of the complex by incorporation of heavier atoms with stronger relativistic effects can enhance the spin-crossover potential of Fe(III) intermediate-spin complexes.

Triiodide-in-Iodine Networks Stabilized by Quaternary Ammonium Cations as Accelerants for Electrode Kinetics of Iodide Oxidation in Aqueous Media

The Zn-polyiodide redox flow battery is considered to be a promising aqueous energy storage system. However, in its charging process, the electrode kinetics of I^- oxidation often suffer from an intrinsically generated iodine film (I₂-F) on the cathode of the battery. Therefore, it is critical to both understand and enhance the observed slow electrode kinetics of I^- oxidation by an electrochemically generated I₂-F. In this article, we introduced an electrogenerated N-methyl-N-ethyl pyrrolidinium iodide (MEPI)-iodine (I₂) solution, designated as MEPIS, and demonstrated that the electrode kinetics of I^- oxidation were dramatically enhanced compared to an I₂-F under conventional electrolyte conditions, such as NaI. We showed that this result mainly contributed to the fast electro-oxidation of triiodide (I₃^-), which exists in the shape of a I₃^--in-I₂ network, [I₃^-·(I₂)_n]. Raman spectroscopic and electrochemical analyses showed that the composition of electrogenerated MEPIS changed from I₃^- to [I₃^-·(I₂)_n] via I₅^- as the anodic overpotential increased. We also confirmed that I^- was electrochemically oxidized on a MEPIS-modified Pt electrode with fast electrode kinetics, which is clearly contrary to the nature of an I₂-F derived from a NaI solution as a kinetic barrier of I^- oxidation. Through stochastic MEPIS-particle impact electrochemistry and electrochemical impedance spectroscopy, we revealed that the enhanced electrode kinetics of I^- oxidation in MEPIS can be attributed to the facilitated charge transfer of I₃^- oxidation in [I₃^-·(I₂)_n]. In addition, we found that the degree of freedom of I₃^- in a quaternary ammonium-based I₂-F can also be critical to determine the kinetics of the electro-oxidation of I^-, which is that MEPIS showed more enhanced charge-transfer kinetics of I^- oxidation compared to tetrabutylammonium I₃^- due to the higher degree of freedom of I₃^-.

Visible Light Generation of a Microsecond Long-Lived Potent Reducing Agent

Photoexcitation of molecular radicals can produce strong reducing agents; however, the limited lifetimes of the doublet excited states preclude many applications. Herein, we propose and demonstrate a general strategy to translate a highly energetic electron from a doublet excited state to a ZrO₂ insulator, thereby increasing the lifetime by about 6 orders of magnitude while maintaining a reducing potential less than -2.4 V vs SCE. Specifically, red light excitation of a salicylic acid modified perylene diimide radical anion PDI^•- anchored to a ZrO₂ insulator yields a ZrO₂(e^-)|PDI charge separated state with an ∼10 μs lifetime in 23% yield. The ZrO₂(e^-)s were shown to drive CO₂ → CO reduction with a Re catalyst present in micromolar concentrations. More broadly, this strategy provides new opportunities to reduce important reagents and catalysts at low concentrations through diffusional electron transfer.

The BCL Method for DSSC: Basis and Applications

In this work, a comprehensive view of the route that led to the construction of a theoretical approach to the functioning of DSSC is presented. The model was developed based on the theoretical interpretation of experimental results obtained along the years for solar cells including different dyes. This allowed the authors to generate the Barrera, Crivelli, Loeb (BCL) model. The method is based on a system of equations that uses time-dependent density functional theory (TDDFT) calculations to obtain a theoretical index, the Global Efficiency Index (GEI), for the efficiency of a sensitized solar cell. The GEI is obtained through the product of three factors: the available energy for injection, the amount of charge injected, and the efficiency of regeneration. The results so far obtained show a promising correlation with the experimental index of photo conversion efficiency (PCE). Moreover, the method provides theoretical tools that allow us to obtain an understanding of the operation of the cell, and provide us with the keys to optimize it. Its application to other type of devices, as, e.g., the highly more efficient perovskite solar cells, emerges as a challenging future goal.

Osmium Complex-Chromophore Conjugates with Both Singlet-to-Triplet Absorption and Long Triplet Lifetime through Tuning of the Heavy-Atom Effect

Os(II) complexes showing singlet-to-triplet absorption are of growing interest as a new class of triplet sensitizers that circumvent energy loss during intersystem crossing, and they enable effective utilization of input photon energy in various applications, such as photoredox catalysis, photodynamic therapy, and photon upconversion. However, triplet excited-state lifetimes of Os(II) complexes are often too short (τ < 1 μs) to transfer their energy to neighboring molecules. While the covalent conjugation of chromophores has been known to extend the net excited-state lifetimes through an intramolecular triplet energy transfer (IMET), heavy-atom effects of the central metals on the attached chromophore units have rarely been discussed. Here, we investigate the relationship between the spin-density contribution of the heavy metals and the net triplet excited-state lifetimes for a series of Os(II) and Ru(II) bis(terpyridine) complexes modified with perylene units. Phosphorescence lifetimes of these compounds strongly depend on the lifetimes of the perylenyl group-localized excited states that are shortened by the heavy-atom effect. The degree of heavy-atom effect can be largely circumvented by introducing meta-phenylene bridges, where the perylene unit retains its intrinsic long excited-state lifetime. The thermal activation to the short-lived excited states is suppressed, thanks to sufficient but still small energy losses during the IMET process. Involvement of the metal center was also confirmed by the prolonged lifetime by replacing Os(II) with Ru(II) that possesses a smaller spin-orbit coupling constant. These results indicate the importance of ligand structures that give a minimum heavy-atom effect as well as the sufficient energy gap among the excited states and fast IMET for elongating the triplet excited-state lifetime without sacrificing the excitation energy.

Hydrazone-based Materials; DFT, TD-DFT, NBO Analysis, Fukui Function, MESP Analysis, and Solar Cell Applications

Due to numerous pharmaceutical and biological activities hydrazone (TC) based materials, it was important to investigate quantum chemical studies such as Density functional theory (DFT) calculations, natural bond orbital (NBO) analysis, molecular electrostatic potential (MESP), and local reactivity usage Fukui function for six TC derivatives compounds. DFT, NBO, MESP, and local reactivity calculations were obtained via utilizing CAM-Becke's three-parameter functional and Leee Yange Parr (CAM-B3LYP) functional and 6-311G +  + (2d, 2p) basis set. Optimized molecular structures for all studied compounds were obtained usage the DFT/CAM-B3LYP/6-311G +  + (2d, 2p) method. In addition, the highest occupied molecular orbital (HOMO), lowest unoccupied molecular orbital (LUMO), energy gap (E_g), light harvest efficiency (LHE), and open-circuit voltage (Voc) of all studied MSs are calculated and illustrated. These properties indicate that these molecular modeling structures as good candidates for utilization in organic DSSCs. The calculated spectroscopic investigations of hydrazine derivatives have been obtained by applying the TD/CAM-B3LYP/6-311G +  + (2d, 2p) method. the calculated UV-Vis absorption spectra for molecular structures under study show nice correlations with experimental spectra.

Charge Recombination Suppressing in Dye-Sensitized Solar Cells by Tuning Dielectric Constant of Triphenylamine Dyes with Altering π-Bridge from Naphthalene to Anthracene Units

Charge recombination reactions (CRRs) are responsible for a major contribution of power conversion efficiency (PCE) loss in dye-sensitized solar cells (DSSCs). This study tracks the impact of the dielectric constant...

Dye-sensitized solar cells based on Fe N-heterocyclic carbene photosensitizers with improved rod-like push-pull functionality

A new generation of octahedral iron(ii)–N-heterocyclic carbene (NHC) complexes, employing different tridentate C^N^C ligands, has been designed and synthesized as earth-abundant photosensitizers for dye sensitized solar cells (DSSCs) and related solar energy conversion applications. This work introduces a linearly aligned push–pull design principle that reaches from the ligand having nitrogen-based electron donors, over the Fe(ii) centre, to the ligand having an electron withdrawing carboxylic acid anchor group. A combination of spectroscopy, electrochemistry, and quantum chemical calculations demonstrate the improved molecular excited state properties in terms of a broader absorption spectrum compared to the reference complex, as well as directional charge-transfer displacement of the lowest excited state towards the semiconductor substrate in accordance with the push–pull design. Prototype DSSCs based on one of the new Fe NHC photosensitizers demonstrate a power conversion efficiency exceeding 1% already for a basic DSSC set-up using only the I⁻/I₃⁻ redox mediator and standard operating conditions, outcompeting the corresponding DSSC based on the homoleptic reference complex. Transient photovoltage measurements confirmed that adding the co-sensitizer chenodeoxycholic acid helped in improving the efficiency by increasing the electron lifetime in TiO₂. Time-resolved spectroscopy revealed spectral signatures for successful ultrafast (<100 fs) interfacial electron injection from the heteroleptic dyes to TiO₂. However, an ultrafast recombination process results in undesirable fast charge recombination from TiO₂ back to the oxidized dye, leaving only 5–10% of the initially excited dyes available to contribute to a current in the DSSC. On slower timescales, time-resolved spectroscopy also found that the recombination dynamics (longer than 40 μs) were significantly slower than the regeneration of the oxidized dye by the redox mediator (6–8 μs). Therefore it is the ultrafast recombination down to fs-timescales, between the oxidized dye and the injected electron, that remains as one of the main bottlenecks to be targeted for achieving further improved solar energy conversion efficiencies in future work.

Iron-based photosensitizers for dye-sensitized solar cells with a rod-like push–pull design. Solar cell performance was limited by ultrafast (sub-ps) recombination, but yielded better performance than the homoleptic parent photosensitizer.

A Conductive Network and Dipole Field for Harnessing Photogenerated Charge Kinetics

Photogenerated charge separation and directional transfer to active sites are pivotal steps in photocatalysis, which limit the efficiency of redox reactions. Here, a conductive network and dipole field are employed to harness photogenerated charge kinetics by using a Ti₃ C₂ /TiO₂ network (TTN). The TTN exhibits a prolonged charge-carrier lifetime (1.026 ns) and an 11.76-fold increase in hexavalent chromium photoreduction reaction kinetics compared to TiO₂ nanoparticles (TiO₂ NPs). This super photocatalytic performance is derived from the efficient photogenerated charge kinetics, which is steered by the conductive network and dipole field. The conductivity enhancement of the TiO₂ network is achieved by continuous chemical bonds, which promotes electron-hole (e-h) separation. In addition, at the interface of Ti₃ C₂ and TiO₂ , band bending induced by the dipole field promotes photogenerated electron spatially directed transfer to the catalytic sites on Ti₃ C₂ . This study demonstrates that a conductive network and dipole field offer a new concept to harness charge kinetics for photocatalysis.

Dynamics of photoconversion processes: the energetic cost of lifetime gain in photosynthetic and photovoltaic systems

The continued development of solar energy conversion technologies relies on an improved understanding of their limitations. In this review, we focus on a comparison of the charge carrier dynamics underlying the function of photovoltaic devices with those of both natural and artificial photosynthetic systems. The solar energy conversion efficiency is determined by the product of the rate of generation of high energy species (charges for solar cells, chemical fuels for photosynthesis) and the energy contained in these species. It is known that the underlying kinetics of the photophysical and charge transfer processes affect the production yield of high energy species. Comparatively little attention has been paid to how these kinetics are linked to the energy contained in the high energy species or the energy lost in driving the forward reactions. Here we review the operational parameters of both photovoltaic and photosynthetic systems to highlight the energy cost of extending the lifetime of charge carriers to levels that enable function. We show a strong correlation between the energy lost within the device and the necessary lifetime gain, even when considering natural photosynthesis alongside artificial systems. From consideration of experimental data across all these systems, the emprical energetic cost of each 10-fold increase in lifetime is 87 meV. This energetic cost of lifetime gain is approx. 50% greater than the 59 meV predicted from a simple kinetic model. Broadly speaking, photovoltaic devices show smaller energy losses compared to photosynthetic devices due to the smaller lifetime gains needed. This is because of faster charge extraction processes in photovoltaic devices compared to the complex multi-electron, multi-proton redox reactions that produce fuels in photosynthetic devices. The result is that in photosynthetic systems, larger energetic costs are paid to overcome unfavorable kinetic competition between the excited state lifetime and the rate of interfacial reactions. We apply this framework to leading examples of photovoltaic and photosynthetic devices to identify kinetic sources of energy loss and identify possible strategies to reduce this energy loss. The kinetic and energetic analyses undertaken are applicable to both photovoltaic and photosynthetic systems allowing for a holistic comparison of both types of solar energy conversion approaches.

Resonance Raman Excitation Profiles of Fe(II)-Terpyridine Complexes: Electronic Effects of Ligand Modifications

Metal 2,2':6',2″-terpyridine (tpy) complexes are readily used as building blocks in metallo-supramolecular polymers that stand out for their photophysical properties in solar energy assemblies. Furthermore, Resonance Raman (RR) excitation profiles are sensitive indicators of the electronic properties of chromophores. Previously, using RR spectroscopy, we studied the [Fe(tpy)₂]²⁺ complex and metallo-supramolecular polymers formed by tpy derivatives and Fe(II) ions. Here, we compare RR spectra of iron (Fe(II)) complexes with 4'-substituted tpy ligands─[Fe(4'-R-tpy)₂]²⁺, with R = H (1a), Cl (2a), 4-chlorophenyl (3a), and 2-thienyl (4a) to describe changes in their electronic structure after functionalization. By combining theoretical calculations, RR, and UV/vis spectra, we elucidated differences in the RR excitation profiles of 1a, 2a, and 4a complexes. In all Raman modes, complexes 1a and 2a showed maximal enhancement only at 532 nm excitation, whereas complex 4a exhibited maximal enhancement selectively at either 532 or 633 nm excitations. Based on our calculations, the mixed metal/ligand character of the highest occupied molecular orbital (HOMO) of 4a complex manifests itself through selective enhancement of vibration modes, mainly localized on the 2-thienyl unit at 633 nm excitation, which may explain the unique behavior of this complex. Therefore, complex 4a is a prospective candidate for further detailed photophysical explorations toward developing sensitizers for solar cells.

Luminescent First-Row Transition Metal Complexes

Precious and rare elements have traditionally dominated inorganic photophysics and photochemistry, but now we are witnessing a paradigm shift toward cheaper and more abundant metals. Even though emissive complexes based on selected first-row transition metals have long been known, recent conceptual breakthroughs revealed that a much broader range of elements in different oxidation states are useable for this purpose. Coordination compounds of V, Cr, Mn, Fe, Co, Ni, and Cu now show electronically excited states with unexpected reactivity and photoluminescence behavior. Aside from providing a compact survey of the recent conceptual key advances in this dynamic field, our Perspective identifies the main design strategies that enabled the discovery of fundamentally new types of 3d-metal-based luminophores and photosensitizers operating in solution at room temperature.

Dye-sensitized solar cells strike back

Dye-sensitized solar cells (DSCs) are celebrating their 30th birthday and they are attracting a wealth of research efforts aimed at unleashing their full potential. In recent years, DSCs and dye-sensitized photoelectrochemical cells (DSPECs) have experienced a renaissance as the best technology for several niche applications that take advantage of DSCs' unique combination of properties: at low cost, they are composed of non-toxic materials, are colorful, transparent, and very efficient in low light conditions. This review summarizes the advancements in the field over the last decade, encompassing all aspects of the DSC technology: theoretical studies, characterization techniques, materials, applications as solar cells and as drivers for the synthesis of solar fuels, and commercialization efforts from various companies.

Excited-state structural dynamics of nickel complexes probed by optical and X-ray transient absorption spectroscopies: insights and implications

Excited states of nickel complexes undergo a variety of photochemical processes, such as charge transfer, ligation/deligation, and redox reactions, relevant to solar energy conversion and photocatalysis. The efficiencies of the aforementioned processes are closely coupled to the molecular structures in the ground and excited states. The conventional optical transient absorption spectroscopy has revealed important excited-state pathways and kinetics, but information regarding the metal center, in particular transient structural and electronic properties, remains limited. These deficiencies are addressed by X-ray transient absorption (XTA) spectroscopy, a detailed probe of 3d orbital occupancy, oxidation state and coordination geometry. The examples of excited-state structural dynamics of nickel porphyrin and nickel phthalocyanine have been described from our previous studies with highlights on the unique structural information obtained by XTA spectroscopy. We close by surveying prospective applications of XTA spectroscopy to active areas of Ni-based photocatalysis based on the knowledge gained from our previous studies.

Polymer thin films as universal substrates for extreme ultraviolet absorption spectroscopy of molecular transition metal complexes

Polystyrene and polyvinyl chloride thin films are explored as sample supports for extreme ultraviolet (XUV) spectroscopy of molecular transition metal complexes. Thin polymer films prepared by slip-coating are flat and smooth, and transmit much more XUV light than silicon nitride windows. Analytes can be directly cast onto the polymer surface or co-deposited within it. The M-edge XANES spectra (40-90 eV) of eight archetypal transition metal complexes (M = Mn, Fe, Co, Ni) are presented to demonstrate the versatility of this method. The films are suitable for pump/probe transient absorption spectroscopy, as shown by the excited-state spectra of Fe(bpy)₃²⁺ in two different polymer supports.