Advances in the Catalytic Conversion of Ethanol into Nonoxygenated Added-Value Chemicals

Given that ethanol can be obtained from abundant biomass resources (e.g., crops, sugarcane, cellulose, and algae), waste, and CO2, its conversion into value-added chemicals holds promise for the sustainable production of high-demand chemical commodities. Nonoxygenated chemicals, including light olefins, 1,3-butadiene, aromatics, and gasoline, are some of the most important of these commodities, substantially contributing to modern lifestyles. Despite the industrial implementation of some ethanol-to-hydrocarbons processes, several fundamental questions and technological challenges remain unaddressed. In addition, the utilization of ethanol as an intermediate provides new opportunities for the direct valorization of CO and CO2. Herein, the recent advances in the design of ethanol conversion catalysts are summarized, providing mechanistic insights into the corresponding reactions and catalyst deactivation, and discussing the related future research directions, including the exploitation of active site proximity to achieve better synergistic effects for reactions involving ethanol.

Potential pathways for CO2 utilization in sustainable aviation fuel synthesis

The development of sustainable aviation fuels (SAFs) is a must for the decarbonization of the aviation industry. This paper explores various pathways for SAF production, focusing on innovative catalytic processes for the utilization of CO2 as a potential feedstock. Key pathways analyzed include the Modified Fischer-Tropsch Synthesis (MFTS), methanol synthesis, and subsequent transformations of methanol into hydrocarbons (MTH), aromatics (MTA) and olefin oligomerization. The potential of these processes is highlighted, alongside the challenges in catalyst development. The paper emphasizes the need for advanced catalytic processes to achieve high selectivity and stability under industrial conditions, which are critical for the commercial viability of CO2-based SAF production. Ultimately, this work aims to provide a comprehensive overview of the current state of research in SAFs, outlining promising directions for future research.

Amino Acid-Assisted Synthesis of Zeolites with Improved Catalytic Properties

Conventional zeolites are limited in their ability to catalyze macromolecular reactions due to micropore constraints, resulting in sluggish reactant and product diffusion and subsequently pore clogging and catalyst deactivation. Consequently, the pore and textural refinement of zeolites to meet industrial demands has become a research hotspot. Herein, we review the amino acid-assisted methods in zeolite synthesis and scrutinize the principle and influential factors governing amino acid involvement in zeolite synthesis. Additionally, we analyze the advantages and challenges associated with the amino acid-assisted method. Certain amino acids can interact with zeolite precursors or crystal surface, thus altering the crystal growth rate and enabling precise control over the crystal size and shape. On the other hand, amino acids can serve as structure-directing agents to orchestrate the generation of mesoporous pores. These capabilities enable the production of zeolites with well-defined pores, particle sizes and/or crystal shapes that satisfy catalytic requirements. Moreover, the unique properties of amino acids allow their complete elimination from the solid product through a simple aqueous washing process, facilitating their recovery for subsequent usage. As result, the amino acid-assisted synthesis methods offer a convenient, green route to zeolites with modulated textual properties for high-performance catalysis.

Mesoscale Reorganization of the Depolymerized Aluminosilicate into Single-Crystalline Hierarchical Zeolite

Controllable synthesis of hierarchical zeolites from natural aluminosilicate minerals is considered an efficient and eco-friendly approach for the production of high-performance zeolites, but its synthesis mechanism is still obscure. Herein, we take the synthesis of a single-crystalline hierarchical NaA zeolite using submolten salt depolymerized kaolin (SMS-K) as the sole source of silicon and aluminum via a mesoscale reorganization strategy as an example to elucidate the reorganization process. Comprehensive morphological and structural analyses reveal that sodium-rich voids in SMS-K facilitate concurrent assembly both within the interior and at the interface of the amorphous gel, leading to the formation of numerous nanoparticles with short-range order which assemble into single-crystal nanocube NaA zeolites with intracrystalline mesopores. By harnessing confinement effects, SMS-K modulates the growth of nanoparticle sizes and enhances the intimate interconnection of nanocubes, thereby yielding NaA zeolite aggregates that exhibit hierarchical porosity, encompassing micro-, meso-, and macropores. This study offers the potential for designing and precisely controlling the fabrication of hierarchical zeolites derived from natural minerals.

Preparation of Metal-Supported Nanostructured Zeolite Catalysts and their Applications in the Upgrading of Biomass-Derived Furans: Advances and Prospects

The development of platform chemicals derived from biomass, in particular, 5-hydroxymethylfurfural (5-HMF) and furfural (FUR), is of crucial importance in biorefinery. Over the past decades, metal-supported nanostructured zeolites, in particular, metal-supported hierarchically porous zeolites or metal-encapsulated zeolites, have been extensively elaborated because of their multiple functionalities and superior properties, for example, shape-selectivity, (hydro)thermal stability, tunable acidity and basicity, redox properties, improved diffusion, and intimacy of multiple active sites. In this review, the effects of such properties of metal-supported nanostructured zeolites on the enhanced catalytic performances in furanic compound upgrading are discussed. In addition, the recent rational design of metal-supported nanostructured zeolites is exemplified. Consequently, the ongoing challenges for further developing metal-supported nanostructured zeolites-based catalysts and their applications in HMF and FUR upgrading are identified.

Catalytic and Electrochemical Study of Cu-ZSM-5/MCM-41

Hierarchically structured micro-mesoporous ZSM-5/MCM-41 composite materials incorporating copper ions were synthesized using pre-synthesized ZSM-5 and cetyltrimethylammonium bromide (CTAB) as a template for forming the MCM-41 structure. The composites were characterized through powder X-ray diffraction, N2 adsorption-desorption, diffuse reflectance spectroscopy (UV-vis DRS), Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy, and energy dispersive X-ray spectroscopy. X-ray diffraction confirmed well-ordered ZSM-5 and MCM-41 structures, and UV-vis DRS showed successful copper ion incorporation. N2 adsorption-desorption revealed the presence of both microporous and mesoporous structures. To evaluate their catalytic performance, Cu-incorporated ZSM-5/MCM-41 composite catalysts were assessed through the oxidation reaction of ethylbenzene using tert-butyl hydroperoxide (TBHP) as the oxidizing agent. With a 9% (w/w) Cu-ZM-5 (5 wt % copper-incorporated ZSM-5/MCM-41) catalyst and an oxidant to ethylbenzene molar ratio of 2:1 at 40 °C in the absence of a solvent for 4 h, the process yielded acetophenone (93.2%) as the major product. Additionally, these Cu-incorporated composites were examined as electrode materials for electrochemical storage. Cyclic voltammetry and galvanostatic charge-discharge studies showed that Cu-ZM-5 exhibited pseudocapacitive behavior, with a capacitance of up to 366 F g-1 at a current density of 1 A g-1, surpassing ZSM-5 and ZSM-5/MCM-41. These results highlight Cu-ZM-5's potential as an effective electrode material for electrochemical storage applications like supercapacitors.

Unravelling the Crucial of Spatial Al Distribution to Realize Precise Alkali-Treatment for Target Acid-Catalyzed Reactions

Constructing mesoporous structure within zeolites by alkali-treatment is an effective protocol to improve their diffusion properties. However, undesirable changes in Brönsted acid site (BAS) densities always offset this advantage in acid-catalyzed reactions. In this context, the crucial roles of spatial aluminum (Al) distribution were unraveled during alkali-treatment of MFI zeolite and the desirable BAS density was achieved in obtained hierarchical samples for the target reactions. Various characterization methods, particularly the multiple one- and two-dimensional magic-angle spinning (MAS) NMR techniques, were performed to track the alkali-treatment processes. For the sample with a more uniform spatial Al distribution, more tetrahedral Al sites would fall off and migrate around the Si-OH in zeolite as Al(OH)4 -. Those re-deposited Al(OH)4 - sites were easily transformed into NMR-invisible Al sites during the calcination process, which contributed negligibly to both Brönsted and Lewis acidities, thus being referred to "acid-free" Al species. While most tetrahedral Al sites were preserved after the alkali-treatment of sample with non-uniform Al distribution and the BAS density gradually increased with treatment time. According to the requirements of typical acid-catalyzed reactions, such as catalytic cracking of 1,3,5-triisopropylbenzene and methanol-to-olefins, the desired hierarchical zeolite catalysts were developed by matching the amounts of extracted Si and generated "acid-free" Al during the precise alkali-treatment.

Zeolite Crystallization Inside Chemically Recyclable Ordered Nanoporous Co3O4 Scaffold: Precise Replication and Accelerated Crystallization

The synthesis of mesoporous zeolites has garnered attention with regard to improving their catalytic and adsorption performances. While the hard-templating method provides opportunities to design precisely controlled hierarchical micro- and mesoporous structures, synthesizing mesoporous zeolites without external precipitation requires significant work. This is mainly due to the absence of usable templates other than carbon with hydrophobic surfaces. Herein, it is demonstrated that the Co3O4 template is valuable in preparing mesoporous silicalite-1 and ZSM-5 with a precisely controlled porous structure through hydrothermal synthesis. Unlike conventional carbon templates, the Co3O4 template is relatively hydrophilic, effective in suppressing external precipitation, and is reusable by dissolving in an acidic solution. The crystallization process also differs from that of the carbon template, as the silicate precipitates on a 3D ordered nanoporous Co3O4 scaffold, followed by crystallization and crystal growth. Furthermore, it is unexpectedly observed that the zeolite crystallization is accelerated in the Co3O4 template. The synthetic approach utilizing nanoporous metal oxides opens new doors for the control of the hierarchical structure of zeolites, as well as for the design of metal oxide-zeolite nanocomposite catalysts, due to the potential extensibility of the combination of metal oxides and zeolites.

Recent developments in (bio)ethanol conversion to fuels and chemicals over heterogeneous catalysts

Bioethanol is one of the most important bio-resources produced from biomass fermentation and is an environmentally friendly alternative to fossil-based fuels as it is regarded as renewable and clean. Bioethanol and its derivatives are used as feedstocks in petrochemical processes as well as fuel and fuel additives in motor vehicles to compensate for the depletion of fossil fuels. This review chronicles the recent developments in the catalytic conversion of ethanol to diethyl ether, ethylene, propylene, long-chain hydrocarbons, and other important products. Various heterogeneous catalysts, such as zeolites, metal oxides, heteropolyacids, mesoporous materials, and metal-organic frameworks, have been used in the ethanol conversion processes and are discussed extensively. The significance of various reaction parameters such as pressure, temperature, water content in the ethanol feed, and the effect of catalyst modification based on various kinds of literature are critically evaluated. Further, coke formation and coke product analysis using various analytical and spectroscopic techniques during the ethanol conversion are briefly discussed. The review concludes by providing insights into possible research paths pertaining to catalyst design aimed at enhancing the catalytic conversion of (bio)ethanol.

Synthesis Method and Principle of Octahedral Hierarchical LTA Zeolite and Its Application to Enhance Catalytic Activity in Styrene Epoxidation

A 4 Å zeolite prepared under the synergistic effect of intense ultrasound and a high-voltage electrostatic field had an octahedral structure rather than a conventional hexahedral structure. XPS and XRD analyses showed that the ratio of silicon to aluminum, 2θ peak position, and the corresponding crystal planes were the same as those in traditional hexahedral 4 Å zeolite, but some crystal planes were more prominent. SEM imaging showed that the octahedral zeolites had a larger particle size. Porosimetry (BET surface area and BJH analysis) showed that the octahedral zeolite had become a mesoporous zeolite, and its specific surface area increased and its pore size expanded, which was conducive to loading catalytically active materials and thus improving its catalytic performance. In this paper, the mechanism of formation of hierarchical LTA zeolite is discussed, and the octahedral hierarchical LTA zeolite is used to catalyze the epoxidation of styrene, giving very good results. It is concluded that the (600), (622), (642), and (644) crystal planes played a decisive role in the styrene epoxidation reaction, providing a realistic basis for explaining the crystal plane catalysis effect of the 4 Å zeolite. This new zeolite prepared under the synergistic effect of intense ultrasound and a high-voltage electrostatic field, being the first time to prepare the octahedral hierarchical LTA zeolite, is simple to produce, green, and environmentally friendly and has good economic development prospects compared to the use of templating agents, which not only provides ideas and simpler methods for optimizing the performance of traditional zeolites and developing new zeolites with better performance but also enhances the theoretical basis for preparing new zeolites.

Understanding Biomineralization Mechanisms to Produce Size-Controlled, Tailored Nanocrystals for Optoelectronic and Catalytic Applications: A Review

Biomineralization, the use of biological systems to produce inorganic materials, has recently become an attractive approach for the sustainable manufacturing of functional nanomaterials. Relying on proteins or other biomolecules, biomineralization occurs under ambient temperatures and pressures, which presents an easily scalable, economical, and environmentally friendly method for nanoparticle synthesis. Biomineralized nanocrystals are quickly approaching a quality applicable for catalytic and optoelectronic applications, replacing materials synthesized using expensive traditional routes. Here, we review the current state of development for producing functional nanocrystals using biomineralization and distill the wide variety of biosynthetic pathways into two main approaches: templating and catalysis. Throughout, we compare and contrast biomineralization and traditional syntheses, highlighting optimizations from traditional syntheses that can be implemented to improve biomineralized nanocrystal properties such as size and morphology, making them competitive with chemically synthesized state-of-the-art functional nanomaterials.

Constructing Hierarchical Zeolites with Highly Complete Framework via Controlled Desilication

Desilication in alkaline medium has been widely used in construction of hierarchical zeolites for industrially relevant catalytic processes. The built of hierarchy in zeolites, especially with low aluminum stability or high Si/Al ratio, often suffers from uncontrolled destruction of zeolitic framework, accompanied by a significant loss of microporous domains and intrinsic acidity after desilication. Here, we report a novel and simple methodology for preparation of hierarchical zeolites with highly complete framework and minimum sacrifice of microporosity and acidity. The pre-impregnated amines in zeolite micropores act as inner pore-directing agents (iPDAs), largely protecting the zeolitic framework and moderating the silicon extraction during the alkaline treatment. The resulting hierarchical zeolites exhibit high crystallinity, tunable hierarchy, stable framework, and well-preserved acidity, endowing them with significantly improved mass transport properties and enhanced activities in catalytic conversion of methanol or furfural.

Defects tune the acidic strength of amorphous aluminosilicates

Crystalline zeolites have high acidity but limited utility due to microporosity, whereas mesoporous amorphous aluminosilicates offer better porosity but lack sufficient acidity. In this work, we investigated defect engineering to fine-tune the acidity of amorphous acidic aluminosilicates (AAS). Here we introduced oxygen vacancies in AAS to synthesize defective acidic aluminosilicates (D-AAS). 1H, 27Al, and 17O solid-state nuclear magnetic resonance (NMR) studies indicated that defects induced localized structural changes around the acidic sites, thereby modifying their acidity. X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR) spectroscopy studies substantiated that oxygen vacancies alter the chemical environment of Brønsted acidic sites of AAS. The effect of defect creation in AAS on its acidity and catalytic behavior was demonstrated using four different acid-catalyzed reactions namely, styrene oxide ring opening, vesidryl synthesis, Friedel-Crafts alkylation, and jasminaldehyde synthesis. The defects played a role in activating reactants during AAS-catalyzed reactions, enhancing the overall catalytic process. This was supported by in-situ FTIR, which provided insights into the molecular-level reaction mechanism and the role of defects in reactant activation. This study demonstrates defect engineering as a promising approach to fine-tune acidity in amorphous aluminosilicates, bridging the porosity and acidity gaps between mesoporous amorphous aluminosilicates and crystalline zeolites.

Synergistic Machine Learning Accelerated Discovery of Nanoporous Inorganic Crystals as Non-Absorbable Oral Drugs

Machine learning (ML) has taken drug discovery to new heights, where effective ML training requires vast quantities of high-quality experimental data as input. Non-absorbable oral drugs (NODs) have unique safety advantage for chronic diseases due to their zero systemic exposure, but their empirical discovery is still time-consuming and costly. Here, a synergistic ML method, integrating small data-driven multi-layer unsupervised learning, in silico quantum-mechanical computations, and minimal wet-lab experiments is devised to identify the finest NODs from massive inorganic materials to achieve multi-objective function (high selectivity, large capacity, and stability). Based on this method, a NH4-form nanoporous zeolite with merlinoite (MER) framework (NH4-MER) is discovered for the treatment of hyperkalemia. In three different animal models, NH4-MER shows a superior safety and efficacy profile in reducing blood K+ without Na+ release, which is an unmet clinical need in chronic kidney disease and Gordon's syndrome. This work provides a synergistic ML method to accelerate the discovery of NODs and other shape-selective materials.

Construction of diverse hollow MFI zeolites through regulating the micropore filling agents

Constructing hollow structure into microporous zeolites can improve the accessibility of acid sites located at the inner part and the diffusion property. Hence, the development of an efficient synthesis strategy to acquire zeolites with tunable hollow structures and acidity has attracted much attention. In this work, an innovative tandem synthesis route was proposed to prepare MFI zeolites with diverse hollow structure while maintaining solid yields exceeding 90 %. The substitution of ethanol molecules, which previously occupied the micropores, with tetrapropylammonium cations was proved to be the key factor to construct hollow structure. And a crystallization-driven particle dissolution mechanism was proposed. The dimension of the hollow cavity, particle size, and Si/Al ratio can be flexibly regulated. Interestingly, hollow MFI samples featuring the common cavity structure, "eye-like" cavity structure, or double-cavity structure can be directly synthesized by controlling the dissolution of core parts. In the 1-butene catalytic cracking reactions, a much higher conversion of 67.2 % was acquired over hollow ZSM-5 compared with that over conventional ZSM-5 (35.8 %) after 64 h of reaction. This improvement can be attributed to the eightfold increase of diffusivity in hollow ZSM-5. This facile and efficient synthesis method endows accurate regulation of the hollow structure, which is meaningful for both fundamental research and industrial applications of hollow zeolites.

Hollow Zeolite Nanoreactor with Double Shells for Methanol Aromatization: Explicit Recognition on Catalytic Function of Inverse Elemental Zone and Shell-Cavity

Core@shell catalyst composited of dual aluminosilicate zeolite can effectively regulate the distribution of acid sites to control hydrocarbon conversion process for the stable formation of target product. However, the diffusion restriction reduces the accessibility of inner active sites and affects synergy between core and shell. Herein, hollow ZSM-5 zeolite nanoreactor with inverse aluminum distribution and double shells are prepared and employed for methanol aromatization. It is demonstrated that the intershell cavity alleviated the steric hindrance from zeolites channel and provided more paths and pore entrance for guest molecule. Correspondingly, olefin intermediates generated from methanol over the external shell are easier to adsorb at internal acid sites for further reactions. Importantly, the diffusion of generated aromatic macromolecules to the external surface is also promoted, which slows down the formation of internal coke, and ensures the use of internal acid sites for aromatization. The aromatics selectivity of the nanoreactor remained at 8% after 154 h, while that of solid core@shell catalyst decreased to 2% after 75 h. This finding promises broader insight to improve internal active site utilization of core@shell catalyst at the diffusion level and can be great aid in the flexible design of multifunctional nanoreactors to enhance the relay efficiency.

Controllable Synthesis of Titanium Silicon Molecular Zeolite Nanosheet with Short b-Axis Thickness and Application in Oxidative Desulfurization

Titanium silicon molecular zeolite (TS-1) plays an important role in catalytic reactions due to its unique nanostructure. The straight channel on TS-1 was parallel to the orientation of the short b-axis and directly exposed to the aperture of the 10-member ring with a diameter of 0.54 nm × 0.56 nm. This structure could effectively reduce the diffuse restriction of bulk organic compounds during the oxidative desulfurization process. As a kind of cationic polymer electrolyte, polydimethyldiallyl ammonium chloride (PDDA) contains continuous [C8H16N+Cl-] chain segments, in which the Cl- could function as an effective structure-directing agent in the synthesis of nanomaterials. The chain of PDDA could adequately interact with the [0 1 0] plane in the preparation process of zeolite, and then the TS-1 nanosheet with short b-axis thickness (6 nm) could be obtained. The pore structure of the TS-1 nanosheet is controlled by regulating the content of PDDA. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), N2 physical adsorption analysis, infrared absorption spectrum and ultraviolet-visible spectrum were used to determine the TS-1. The thinner nanosheets exhibit excellent catalytic performance in oxidative desulfurization of dibenzothiophene (DBT), in which the removal rate could remain at 100% after three recycles. Here, the TS-1 nanosheet with short b-axis thickness has a promising future in catalytic reactions.

Innovations and challenges in adsorption-based wastewater remediation: A comprehensive review

Water contamination is an escalating emergency confronting communities worldwide. While traditional adsorbents have laid the groundwork for effective water purification, their selectivity, capacity, and sustainability limitations have driven the search for more advanced solutions. Despite many technological advancements, economic, environmental, and regulatory hurdles challenge the practical application of advanced adsorption techniques in large-scale water treatment. Integrating nanotechnology, advanced material fabrication techniques, and data-driven design enabled by artificial intelligence (AI) and machine learning (ML) have led to a new generation of optimized, high-performance adsorbents. These advanced materials leverage properties like high surface area, tailored pore structures, and functionalized surfaces to capture diverse water contaminants efficiently. With a focus on sustainability and effectiveness, this review highlights the transformative potential of these advanced materials in setting new benchmarks for water purification technologies. This article delivers an in-depth exploration of the current landscape and future directions of adsorbent technology for water remediation, advocating for a multidisciplinary approach to overcome existing barriers in large-scale water treatment applications.

The Current Understanding of Mechanistic Pathways in Zeolite Crystallization

Zeolite catalysts and adsorbents have been an integral part of many commercial processes and are projected to play a significant role in emerging technologies to address the changing energy and environmental landscapes. The ability to rationally design zeolites with tailored properties relies on a fundamental understanding of crystallization pathways to strategically manipulate processes of nucleation and growth. The complexity of zeolite growth media engenders a diversity of crystallization mechanisms that can manifest at different synthesis stages. In this review, we discuss the current understanding of classical and nonclassical pathways associated with the formation of (alumino)silicate zeolites. We begin with a brief overview of zeolite history and seminal advancements, followed by a comprehensive discussion of different classes of zeolite precursors with respect to their methods of assembly and physicochemical properties. The following two sections provide detailed discussions of nucleation and growth pathways wherein we emphasize general trends and highlight specific observations for select zeolite framework types. We then close with conclusions and future outlook to summarize key hypotheses, current knowledge gaps, and potential opportunities to guide zeolite synthesis toward a more exact science.

Structured Catalysts and Catalytic Processes: Transport and Reaction Perspectives

The structure of catalysts determines the performance of catalytic processes. Intrinsically, the electronic and geometric structures influence the interaction between active species and the surface of the catalyst, which subsequently regulates the adsorption, reaction, and desorption behaviors. In recent decades, the development of catalysts with complex structures, including bulk, interfacial, encapsulated, and atomically dispersed structures, can potentially affect the electronic and geometric structures of catalysts and lead to further control of the transport and reaction of molecules. This review describes comprehensive understandings on the influence of electronic and geometric properties and complex catalyst structures on the performance of relevant heterogeneous catalytic processes, especially for the transport and reaction over structured catalysts for the conversions of light alkanes and small molecules. The recent research progress of the electronic and geometric properties over the active sites, specifically for theoretical descriptors developed in the recent decades, is discussed at the atomic level. The designs and properties of catalysts with specific structures are summarized. The transport phenomena and reactions over structured catalysts for the conversions of light alkanes and small molecules are analyzed. At the end of this review, we present our perspectives on the challenges for the further development of structured catalysts and heterogeneous catalytic processes.

Design Synthesis of Low-Silica SAPO-34 Nanocrystals by Constructing Isomorphous Core-Shell Structure: An Effective Catalyst for Improving Catalytic Performances in Methanol-to-Olefins Reaction

It is well known that low-silica SAPO-34, with an extra porosity (meso- and/or macropores) system, affords excellent catalytic performance in the methanol-to-olefins (MTO) reaction, while the direct synthesis of low-silica SAPO-34 with a hierarchical structure is difficult to achieve, principally because the crystal impurities are usually formed under a low silica content in a gel precursor. Herein, low-silica SAPO-34 nanocrystals were successfully fabricated for the first time by constructing an isomorphous core-shell structure in an epitaxial growth manner. In which, low-silica, ultrasmall nanosquare-shaped SAPO-34 crystals with the same growth orientation along the (100) crystal plane compactly grow on the monocrystal SAPO-34 cores. Crucially, the external surface acid properties of the core SAPO-34 with the Si-rich outer layer are effectively modified by the low-silica SAPO-34 shell. Furthermore, the growth process and Si-substitution mechanism of the shell zeolite were comprehensively investigated. It was found that with the prolonged crystallization time, more and more coordinated Si(4Al) and Si(3Al) structures via two substitution mechanisms (SM2 and SM3) are generated in the nanocrystalline SAPO-34 shell, which endow moderate acidity of the core-shell SAPO-34. Compared to the uncoated SAPO-34, the core-shell SAPO-34 performs a longer lifespan and a higher average selectivity of light olefins (ethylene plus propylene) when applied to the MTO reaction, which is attributed to the positive effects of the luxuriant interstitial pores offering a fast diffusion channel and the moderate acid density depressing the hydrogen transfer reaction of light olefins. This work provides new insights into the fabrication of low-silica SAPO-34 nanocrystals, which are based on the rational design of the isomorphous core-shell zeolite.

Controlling product selectivity and catalyst lifetime by altering acid strength, cavity size of SAPO, and diffusion rate of methanol in the MTO reaction: DFT and MD calculations

The initiation mechanisms of the MTO process over silicoaluminophosphate (SAPO) catalysts with zeolite-like structures using first-principles calculations have been investigated. The supramolecular system of silicoaluminophosphates consisting of inorganic cages with Brønsted acid sites and trapped organic compounds was used as a catalyst in the MTO reaction. To study the structure-property relationship in more detail, the effect of acidity and cage size of different types of SAPOs (SAPO-18, SAPO-34, and SAPO-17 with CHA, AEI, and ERI structures, respectively) in the aromatic cycle of hydrocarbon pool mechanism was investigated. The differences in reaction barriers can be explained by the cage size, pore topology, and environment of framework protons of materials. Product selectivity was controlled by using cavity-type zeolite, the steric constraint of the cavity for the formation of critical intermediates, and acidic strength. The results show that ethylene selectivity increases as the cavity size decreases, and the elliptical pore size of the structures decreases, thereby decreasing the acidity of the zeolite structure, leading to an increase in propylene selectivity. SAPO-18 exhibits the longest reaction lifetime and has the highest amount of carbonaceous material after reaction completion. SAPO-17 with small pore and cavity size is selective to ethylene, although it shows a rapid catalyst deactivation rate.

Poly(ionic liquid)s threaded into covalent organic framework for synergistic capture of polybrominated diphenyl ethers

The efficient enrichment of trace polybrominated diphenyl ethers (PBDEs) in environmental waters remains challenging for environmental monitoring and analysis. Herein, a covalent organic frameworks-poly(ionic liquid)s hybrid material (COF-γ-PIL) is synthesized by threading poly(1-vinyl-3-methylimidazolium bis ((trifluoromethyl) sulfonyl) imide) into a vinyl-decorated COF via photopolymerization. The resultant hybrid retains the crystallinity and porosity of COF, thus offering adequate adsorption sites for the targets. PIL threaded in COF facilitates the synergistic capture of target molecules within the hybrid through multiple interactions, including Van der Waals forces, weak hydrogen bonding, and hydrophobic interactions. As a proof of concept, COF-γ-PIL was utilized as the fiber coating for SPME of PBDEs in waters prior to their analysis via GC-MS. Excellent analytical results were achieved, with wide linearity (0.01-100 ng L-1), low limits of detection (0.0021-0.014 ng L-1), and satisfactory recoveries (78.6%-103.6%). The outstanding extraction performance can be ascribed to the extraordinary flexibility of the active fraction on linear polymers threaded in COF, which facilitates collaborative capture for target molecules, as revealed by density functional theory (DFT) calculations. This work uncovers the microscopic mechanism for PBDEs capturing and provides new insights into the design of functionalized COF hybrids.

Effect of CNT over structural properties of SAPO-34 in MTO process: Experimental and molecular simulation studies

The hierarchical silicoaluminophosphate (SAPO-34) catalyst was synthesized using the mixtures of diethylamine (D) and butylamine (B) as a structure-directing agent (SDA), and carbon nanotube (CNT) as a secondary template in the hydrothermal method. The catalysts were characterized by Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), N2 physisorption, and temperature-programmed desorption of ammonia (NH3-TPD) techniques and evaluated for the catalytic activity in the Methanol to Olefins (MTO) process. The results showed that the use of CNT as the secondary template improved the hierarchical structure of SAPO-34 due to increasing the external surface area and mesoporosity and decreasing the particle size and as a result, made better the performance of the prepared SAPO-34 zeolite in the MTO process. Among all the prepared samples, the CNT-B-D catalyst synthesized by mixing three templates displayed the highest ethylene and propylene selectivity of 49% and 34%, respectively. Also, using CNT in the synthesis of samples increased the catalytic stability. In addition, pure, binary, and ternary adsorption isotherms and diffusivities of the main products and reactants over the SAPO-34 were investigated by theoretical measurements, because sorption and diffusion affect the catalyst stability and C2-C3 selectivity in the MTO reaction. The higher diffusion rate of ethylene leads to following the aromatic-based cycle in the MTO process.

Bifunctional MoS2/Al2O3-Zeolite Catalysts in the Hydroprocessing of Methyl Palmitate

A series of bifunctional catalysts, MoS2/Al2O3 (70 wt.%), zeolite (30 wt.%) (zeolite-ZSM-5, ZSM-12, and ZSM-22), and silica aluminophosphate SAPO-11, were synthesized for hydroconversion of methyl palmitate (10 wt.% in dodecane) in a trickle-bed reactor. Mo loading was about 7 wt.%. Catalysts and supports were characterized by different physical-chemical methods (HRTEM-EDX, SEM-EDX, XRD, N2 physisorption, and FTIR spectroscopy). Hydroprocessing was performed at a temperature of 250-350 °C, hydrogen pressure of 3.0-5.0 MPa, liquid hourly space velocity (LHSV) of 36 h-1, and an H2/feed ratio of 600 Nm3/m3. Complete conversion of oxygen-containing compounds was achieved at 310 °C in the presence of MoS2/Al2O3-zeolite catalysts; the selectivity for the conversion of methyl palmitate via the 'direct' hydrodeoxygenation (HDO) route was over 85%. The yield of iso-alkanes gradually increases in order: MoS2/Al2O3 < MoS2/Al2O3-ZSM-12 < MoS2/Al2O3-ZSM-5 < MoS2/Al2O3-SAPO-11 < MoS2/Al2O3-ZSM-22. The sample MoS2/Al2O3-ZSM-22 demonstrated the highest yield of iso-alkanes (40%). The hydroisomerization activity of the catalysts was in good correlation with the concentration of Brønsted acid sites in the synthesized supports.

Hierarchical SAPO-34 Catalysts as Host for Cu Active Sites

Cu-containing hierarchical SAPO-34 catalysts were synthesized by the bottom-up method using different mesoporogen templates: CTAB encapsulated within ordered mesoporous silica nanoparticles (MSNs) and sucrose. A high fraction of the Cu centers exchanged in the hierarchical SAPO-34 architecture with high mesopore surface area and volume was achieved when CTAB was embedded within ordered mesoporous silica nanoparticles. Physicochemical characterization was performed by using structural and spectroscopic techniques to elucidate the properties of hierarchical SAPO-34 before and after Cu introduction. The speciation of the Cu sites, investigated by DR UV-Vis, and the results of the catalytic tests indicated that the synergy between the textural properties of the hierarchical SAPO-34 framework, the high Cu loading, and the coordination and localization of the Cu sites in the hierarchical architecture is the key point to obtaining good preliminary results in the NO selective catalytic reduction with hydrocarbons (HC-SCR).

Synthesis of Dendritic ZSM-5 Zeolite through Micellar Templating Controlled by the Amphiphilic Organosilane Chain Length

The synthesis of ZSM-5 zeolites by hydrothermal crystallization of protozeolitic nanounits functionalized with amphiphilic organosilanes of different chain length (Cn-N(CH3)2-(CH2)3-Si-(OCH3)3, n = 10, 14, 18 and 22) has been investigated. Well-developed dendritic nanoarchitectures were achieved when using C14 and C18 organosilanes, exhibiting a radial and branched pattern of zeolitic nanounits aggregates. In contrast, although C10 and C22 organosilanes led to materials with hierarchical porosity, they lack of dendritic features. These differences have been linked to the formation of an amorphous mesophase at the gel preparation stage for the C14 and C18 samples, in which the surfactant micelles are covalently connected with the protozeolitic nanounits through siloxane bonds. The presence of the dendritic nanostructure positively impacts both the textural and catalytic properties of ZSM-5 zeolite. Thus, ZSM-5 (C14) and ZSM-5 (C18) samples exhibit the largest contribution of mesoporosity in terms of both surface area and pore volume. On the other hand, when tested as catalysts in the aldol condensation of furfural with cyclopentanone, which is an interesting reaction for the production of sustainable jet fuels, the highest catalytic activity is attained over the dendritic ZSM-5 materials due to their remarkable accessibility and balanced Brønsted/Lewis acidity.

Recent Developments on the Catalytic and Biosensing Applications of Porous Nanomaterials

Nanoscopic materials have demonstrated a versatile role in almost every emerging field of research. Nanomaterials have come to be one of the most important fields of advanced research today due to its controllable particle size in the nanoscale range, capacity to adopt diverse forms and morphologies, high surface area, and involvement of transition and non-transition metals. With the introduction of porosity, nanomaterials have become a more promising candidate than their bulk counterparts in catalysis, biomedicine, drug delivery, and other areas. This review intends to compile a self-contained set of papers related to new synthesis methods and versatile applications of porous nanomaterials that can give a realistic picture of current state-of-the-art research, especially for catalysis and sensor area. Especially, we cover various surface functionalization strategies by improving accessibility and mass transfer limitation of catalytic applications for wide variety of materials, including organic and inorganic materials (metals/metal oxides) with covalent porous organic (COFs) and inorganic (silica/carbon) frameworks, constituting solid backgrounds on porous materials.

Analysis of Al site-directing ability of organic structure-directing agents in FER and CHA zeolites: a computational exploration of energetic preferences

This study explores the control of Al location in zeolites by organic structure-directing agents (OSDAs) using atomistic simulations. We examine several zeolite-OSDA complexes to quantify the Al site-directing ability. The results show that OSDAs induce different energetic preferences to direct Al at certain locations. In particular, these effects can be enhanced by OSDAs with N-H moieties. Our findings will be useful for the development of novel OSDAs that can modulate Al site-directing properties.

Machine learning-assisted crystal engineering of a zeolite

It is shown that Machine Learning (ML) algorithms can usefully capture the effect of crystallization composition and conditions (inputs) on key microstructural characteristics (outputs) of faujasite type zeolites (structure types FAU, EMT, and their intergrowths), which are widely used zeolite catalysts and adsorbents. The utility of ML (in particular, Geometric Harmonics) toward learning input-output relationships of interest is demonstrated, and a comparison with Neural Networks and Gaussian Process Regression, as alternative approaches, is provided. Through ML, synthesis conditions were identified to enhance the Si/Al ratio of high purity FAU zeolite to the hitherto highest level (i.e., Si/Al = 3.5) achieved via direct (not seeded), and organic structure-directing-agent-free synthesis from sodium aluminosilicate sols. The analysis of the ML algorithms' results offers the insight that reduced Na₂O content is key to formulating FAU materials with high Si/Al ratio. An acid catalyst prepared by partial ion exchange of the high-Si/Al-ratio FAU (Si/Al = 3.5) exhibits improved proton reactivity (as well as specific activity, per unit mass of catalyst) in propane cracking and dehydrogenation compared to the catalyst prepared from the previously reported highest Si/Al ratio (Si/Al = 2.8).

Improved Catalytic Performances of the NaOH-Treated ZSM-22 Zeolite in the 1-Butene Skeletal Isomerization Reaction: Effect of External Acid Sites

In this paper, a series of alkaline-treated ZSM-22 zeolite samples were prepared by treating the parent ZSM-22 zeolite using NaOH aqueous solution with different concentrations. By investigating the effects of alkaline treatment on the parent ZSM-22 zeolite, we discovered that the alkaline treatment contributed to the reduction of Brønsted acid sites due to the coverage of extra-framework Al on its external surface. In addition, it was found that the alkaline-treated samples were favorable to the improvement of the isobutene yield and selectivity, while these features appeared to be low for the subsequent acid-washed counterparts in the skeletal isomerization reaction of 1-butene. These results indicate that the catalytic performance of ZSM-22 zeolite is related to reduced amounts of Brønsted acid sites in it. To further reveal the reasons for the promoted catalytic performances of the alkaline-treated ZSM-22 series zeolites, we studied the properties of coke deposited on the two series of samples using Raman spectroscopy and thermogravimetric analysis and mass spectrometry (TG/MS-TPO). It was shown that the carbon deposited on the alkaline-treated series samples was mainly distributed at the outer surface, while the coke was distributed to a relatively lesser extent at the exterior surface for the acid-washed series samples. Moreover, by partially passivating outer acid sites of the parent zeolite, the selected alkaline-treated zeolite, and acid-washed zeolite, their isobutene selectivities were all improved with the decrease in outer acid sites. These phenomena confirmed that the improved catalytic performances of the alkaline-treated samples are related to their decreased external Brønsted acid site density, which further demonstrated that the high isobutene yield and selectivity in the skeletal isomerization reaction of 1-butene is realized via the monomolecular reaction pathway of 1-butene.

Molecular Views on Mechanisms of Brønsted Acid-Catalyzed Reactions in Zeolites

The Brønsted acidity of proton-exchanged zeolites has historically led to the most impactful applications of these materials in heterogeneous catalysis, mainly in the fields of transformations of hydrocarbons and oxygenates. Unravelling the mechanisms at the atomic scale of these transformations has been the object of tremendous efforts in the last decades. Such investigations have extended our fundamental knowledge about the respective roles of acidity and confinement in the catalytic properties of proton exchanged zeolites. The emerging concepts are of general relevance at the crossroad of heterogeneous catalysis and molecular chemistry. In the present review, emphasis is given to molecular views on the mechanism of generic transformations catalyzed by Brønsted acid sites of zeolites, combining the information gained from advanced kinetic analysis, in situ, and operando spectroscopies, and quantum chemistry calculations. After reviewing the current knowledge on the nature of the Brønsted acid sites themselves, and the key parameters in catalysis by zeolites, a focus is made on reactions undergone by alkenes, alkanes, aromatic molecules, alcohols, and polyhydroxy molecules. Elementary events of C-C, C-H, and C-O bond breaking and formation are at the core of these reactions. Outlooks are given to take up the future challenges in the field, aiming at getting ever more accurate views on these mechanisms, and as the ultimate goal, to provide rational tools for the design of improved zeolite-based Brønsted acid catalysts.

Ptychographic measurements of varying size and shape along zeolite channels

Sub-angstrom resolution imaging of porous materials like zeolites is important to reveal their structure-property relationships involved in ion exchange, molecule adsorption and separation, and catalysis. Using multislice electron ptychography, we successfully measured the atomic structure of zeolite at sub-angstrom lateral resolution for 100-nanometer-thick samples. Both lateral and depth deformations of the straight channels are mapped, showing the three-dimensional structural inhomogeneity and flexibility. Since most zeolites in industrial applications are usually tens to hundreds of nanometers thick, the sub-angstrom resolution imaging and accurate measurements of depth-dependent local structures with electron ptychography at low-dose condition will find wide applications in porous materials close to their industrially relevant conditions.

Solid-State Synthesis of Aluminophosphate Zeotypes by Calcination of Amorphous Precursors

Because of the growing interest in the applications of zeolitic materials and the various challenges associated with traditional synthesis methods, the development of novel synthesis approaches remains of fundamental importance. Herein, we report a general route for the synthesis of aluminophosphate (AlPO) zeotypes by simple calcination of amorphous precursors at moderate temperatures (250-450 °C) for short reaction times (3-60 min). Accordingly, highly crystalline AlPO zeotypes with various topologies of AST, SOD, LTA, AEL, AFI, and -CLO, ranging from ultra-small to extra-large pores, have been successfully synthesized. Multinuclear multidimensional solid-state NMR techniques combined with complementary operando mass spectrometry (MS), powder X-ray diffraction, high-resolution transmission electron microscopy, and Raman characterizations reveal that covalently bonded fluoride in the intermediates catalyze the bond breaking and remaking processes. The confined organic structure-directing agents with high thermal stability direct the ordered rearrangement. This novel synthesis strategy not only shows excellent synthesis efficiency in terms of a simple synthesis procedure, a fast crystallization rate, and a high product yield, but also sheds new light on the crystallization mechanism of zeolitic materials.

Applications of Graphene in Five Senses, Nervous System, and Artificial Muscles

Graphene remains of great interest in biomedical applications because of biocompatibility. Diseases relating to human senses interfere with life satisfaction and happiness. Therefore, the restoration by artificial organs or sensory devices may bring a bright future by the recovery of senses in patients. In this review, we update the most recent progress in graphene based sensors for mimicking human senses such as artificial retina for image sensors, artificial eardrums, gas sensors, chemical sensors, and tactile sensors. The brain-like processors are discussed based on conventional transistors as well as memristor related neuromorphic computing. The brain-machine interface is introduced for providing a single pathway. Besides, the artificial muscles based on graphene are summarized in the means of actuators in order to react to the physical world. Future opportunities remain for elevating the performances of human-like sensors and their clinical applications.

Rational Design of Covalent Organic Frameworks as Gas Diffusion Layers for Multi-atmosphere Lithium-Air Batteries

Non-aqueous Li-air batteries, despite their high energy density and low cost, have not been deployed practically due to their instability in ambient air, where moisture causes parasitic reactions and shortens their life drastically. Here, we demonstrate the rational design of nanoporous covalent organic frameworks (COFs) as effective gas diffusion layers (GDLs) to address this constraint. The COF GDLs, with a tailor-made pore size of ≈1.4 nm and superhydrophobicity, can limit the intrusion of organic electrolytes and moisture into the gas diffusion channels, enabling high capacity, fast kinetics, and excellent stability of the Li-air batteries. Moreover, we achieve multi-atmosphere Li-air batteries, which can stably cycle under open ambient air (relative humidity up to 95 %) and even in various atmospheres with looping oxygen, humid air, and carbon dioxide. The design principles of our COF GDLs can be universally applied in energy storage and electrochemical systems using organic electrolytes.

Conceptual and Practical Aspects of Metal-Organic Frameworks for Solid-Gas Reactions

The presence of site-isolated and well-defined metal sites has enabled the use of metal-organic frameworks (MOFs) as catalysts that can be rationally modulated. Because MOFs can be addressed and manipulated through molecular synthetic pathways, they are chemically similar to molecular catalysts. They are, nevertheless, solid-state materials and therefore can be thought of as privileged solid molecular catalysts that excel in applications involving gas-phase reactions. This contrasts with homogeneous catalysts, which are overwhelmingly used in the solution phase. Herein, we review theories dictating gas phase reactivity within porous solids and discuss key catalytic gas-solid reactions. We further treat theoretical aspects of diffusion within confined pores, the enrichment of adsorbates, the types of solvation spheres that a MOF might impart on adsorbates, definitions of acidity/basicity in the absence of solvent, the stabilization of reactive intermediates, and the generation and characterization of defect sites. The key catalytic reactions we discuss broadly include reductive reactions (olefin hydrogenation, semihydrogenation, and selective catalytic reduction), oxidative reactions (oxygenation of hydrocarbons, oxidative dehydrogenation, and carbon monoxide oxidation), and C-C bond forming reactions (olefin dimerization/polymerization, isomerization, and carbonylation reactions).

Recent Advances in Tetra- (Ti, Sn, Zr, Hf) and Pentavalent (Nb, V, Ta) Metal-Substituted Molecular Sieve Catalysis

Metal substitution of molecular sieve systems is a major driving force in developing novel catalytic processes to meet current demands of green chemistry concepts and to achieve sustainability in the chemical industry and in other aspects of our everyday life. The advantages of metal-substituted molecular sieves include high surface areas, molecular sieving effects, confinement effects, and active site and morphology variability and stability. The present review aims to comprehensively and critically assess recent advances in the area of tetra- (Ti, Sn, Zr, Hf) and pentavalent (V, Nb, Ta) metal-substituted molecular sieves, which are mainly characterized for their Lewis acidic active sites. Metal oxide molecular sieve materials with properties similar to those of zeolites and siliceous molecular sieve systems are also discussed, in addition to relevant studies on metal-organic frameworks (MOFs) and some composite MOF systems. In particular, this review focuses on (i) synthesis aspects determining active site accessibility and local environment; (ii) advances in active site characterization and, importantly, quantification; (iii) selective redox and isomerization reaction applications; and (iv) photoelectrocatalytic applications.

Photocatalytic degradation of triclocarban in aqueous solution using a modified zeolite/TiO2 composite: kinetic, mechanism study and toxicity assessment

The current work aimed to investigate the degradation of the triclocarban (TCC) in aqueous solution using a modified zeolite/TiO₂ composite (MZTC) synthesized by applying the electrochemical anodization (ECA). The synthesis process was conducted at different voltages (10, 40, and 60) V in 1 h and using electrophoresis deposition (EPD) in doping zeolite. The MZTC was covered with the array ordered, smooth and optimum elongated nanotubes with 5.1 μm of the length, 120.3 nm of the inner diameter 14.5 nm of the wall thickness with pure titanium and crystalline titania as determined by FESEM/EDS, and XRD. The kinetic study by following Langmuir-Hinshelwood(L-H) model and pseudo first order, the significant constant rate was obtained at pH 11 which was 0.079 ppm/min, 0.75 cm² of MZTC catalyst loading size achieved 0.076 ppm/min and 5 ppm of TCC initial concentration reached 0.162 ppm/min. The high-performance liquid chromatography (HPLC) analysis for mechanism study of TCC photocatalytic degradation revealed eleven intermediate products after the whole process of photocatalysis. In regard of toxicology assessment by the bacteria which is Photobacterium phosphoreum, the obtained concentration of TCC at minute 60 was less satisfied with remained 0.36 ppm of TCC was detected indicates that the concentration was above allowable level. Where the allowable level of TCC in stream is 0.1 ppm.

Effects of Hydrothermal Treatment on Mesopore Structure and Connectivity in Doped Ceria-Zirconia Mixed Oxides

Pore size and pore connectivity control diffusion-based transport in mesopores, a crucial property governing the performance of heterogeneous catalysts. In many cases, transition-metal oxide catalyst materials are prepared from molecular precursors involving hydrothermal treatment followed by heat treatment. Here, we investigate the effects of such a hydrothermal aftertreatment step, using an aqueous ammonia solution, on the disordered mesopore network of Ce_xZr_1-x-y-zY_yLa_zO_2-δ mixed oxides. This procedure is a common synthesis step in the preparation of such ceria-based oxygen storage materials applied in three-way catalysis, employed to improve the materials' thermal stability. We perform state-of-the-art Ar-physisorption analysis, especially advanced hysteresis scanning, to paint a detailed picture of the alterations in mesopore space caused by the hydrothermal aftertreatment and subsequent aging at 1050 °C. Furthermore, we investigate the network characteristics by electron tomography in combination with suitable statistical analysis, enabling a consistent interpretation of the desorption scans (physisorption). The results indicate that the hydrothermal aftertreatment enhances the mesopore connectivity of the continuous 3D network by widening pores and especially necks, hence facilitating accessibility to the particles' internal surface area and the ability to better withstand high temperatures.

Can We Form Mesoporous Zeolites by Steam Assisted Crystallization of MCM-41?

The possibility of crystallizing silicalite-1 (MFI) from the pore walls of as-synthesized MCM-41 via steam-assisted crystallization (SAC) was thoroughly investigated. A kinetic study was conducted through the impregnation of as-synthesized MCM-41 with the structure-directing agent tetrapropyl-ammonium hydroxide (TPAOH). Materials obtained after different SAC treatment times (1−288 h) were characterized by XRD, nitrogen physisorption at 77 K, TGA/DTA, and SEM. The achieved results allowed us to conclude that during SAC treatment, rapid destruction of the hexagonal mesophase occurs with the enlargement of mesopores, probably by their coalescence, until achieving non-porous amorphous silica. Only thereafter is the crystallization of the MFI phase evidenced through the development of micron-sized (>10 µm) MFI structured crystals. This study suggests the probable practical impossibility of even partial crystallization of the pore walls of mesoporous materials by SAC.

Hierarchical hollow zeolite fiber in catalytic applications: A critical review

Zeolites have widely been studied because of the better performance as catalysts and supports. However, the zeolites with only micropores have drawbacks in reactivity and selectivity due to limitation of diffusivity. The hollow zeolite fibers (HZF) with hierarchical porosity however can overcome the problem. The HZF can be synthesized by such methods as incorporated substrate removal method, solid-solid transformation method, co-axial electrospinning technology, dry-wet spinning technology, and hollow fiber incorporation method. The unique hierarchical porous structure leads to the great improvement in the diffusion efficiency of reactants. The catalytic zeolite membrane fibers are the most commonly used as they have stronger catalyst stability and higher catalytic selectivity. The HZFs are suitable in catalytic applications such as selective catalysis, CO preferential oxidation, air purification and wastewater treatment. In order that the HZFs can be applied to industrial operations, more research work should be carried out, such as developments of self-assembly pure HZFs, catalytic substrate incorporated HZFs, HZFs with gradient multicomponent zeolites and HZFs with nanoscale diameters.