Upconversion nanoparticles in biological labeling, imaging, and therapy

Single-Photon Deep-Red Light-Triggered Direct Release of an Anticancer Drug: An Investigative Tumor Regression Study on a Breast Cancer Spheroidal Tumor Model

Breast adenocarcinoma ranks high among the foremost lethal cancers affecting women globally, with its triple-negative subtype posing the greatest challenge due to its aggressiveness and resistance to treatment. To enhance survivorship and patients' quality of life, exploring advanced therapeutic approaches beyond conventional chemotherapies is imperative. To address this, innovative nanoscale drug delivery systems have been developed, offering precise, localized, and stimuli-triggered release of anticancer agents. Here, we present perylenemonoimide nanoparticle-based vehicles engineered for deep-red light activation, enabling direct chlorambucil release. Synthesized via the reprecipitation technique, these nanoparticles were thoroughly characterized. Light-induced drug release was monitored via spectroscopic and reverse-phase HPLC. The efficacy of the said drug delivery system was evaluated in both two-dimensional and three-dimensional spheroidal cancer models, demonstrating significant tumor regression attributed to apoptotic cell death induced by efficient drug release within cells and spheroids. This approach holds promise for advancing targeted breast cancer therapy, enhancing treatment efficacy and minimizing adverse effects.

Alkali Silicates Codoped with NIR-Emitting RE (Nd3+ and Yb3+) Ions for Thermometry Applications

In the present study, the synthesis of BaSrSiO4 co-doped Yb3+ and Nd3+ nanophosphors (NPs) was successfully achieved through the conventional sol-gel method, as confirmed by X-ray diffraction and SEM analysis, verifying the formation of pure NPs. The FTIR and Raman spectra analysis confirm the formation of silicates, as different modes and vibrations of Si-O and Si-O-Si were seen at 800-1000 cm-1. The energy transfer (ET) mechanism between Nd3+ and Yb3+ ions was seen as the emission spectra showed a rise in intensity of one over another. PLE emission spectra showed transitions at 2F7/2-2F5/2 for Yb3+ and from 4F3/2 to (4I9/2, 4I11/2, and 4I13/2) for Nd3+ when excited at 785 nm. All the samples record low activation energy, which shows that the rate of reaction will be higher in all the samples, and it will be highest for 1 mol% Nd3+ and 1 mol% Yb3+. An increasing value of τ was seen with increasing Yb3+ concentration, which confirms the increase in the population of trap centers. The positron annihilation lifetime (PAL) curve showed that 1 mol% Yb3+ and 2 mol Nd3+ have single vacancies or shallower positron traps, whereas 3 mol% Yb3+ and 2 mol% Nd3+ have larger defects like surface oxygen vacancy clusters. The other two samples have balance vacancies, which makes them best for thermometry applications. The fluorescence intensity ratio (FIR) was calculated to get sensitivity for thermometry application. 2.13% K-1 sensitivity achieved at 303-333 K temperature.

Dynamic modulation of multicolor upconversion luminescence of Er3+ via excitation pulse width

Lanthanide-doped upconversion (UC) luminescent materials display multicolor emissions, making them ideal for a variety of applications, such as multi-channel biological imaging, fluorescence encryption, anti-counterfeiting, and 3D display. Manipulating the UC emissions of the luminescent materials with a fixed composition is crucial for their applications. Herein, we propose a facile strategy to achieve pulse-width-dependent multicolor UC emissions in NaYF4:Yb/Er/Tm nanocrystals. Upon excitation with a 980 nm continuous-wave laser diode, Er3+ ions in NaYF4:20%Yb,15%Er,1%Tm nanocrystals exhibited UC emissions with a red-to-green (R/G) ratio of 11.3. Nevertheless, by employing a 980 nm pulse laser with pulse widths from 0.1 to 10 ms, the UC R/G ratio can be easily adjusted from 0.9 to 11.3, resulting in continuous and remarkable color transformation from green, yellow, orange, to red. By virtue of the dynamic luminescence color variation of these NaYF4:20%Yb,15%Er,1%Tm nanocrystals, we demonstrated their potential applications in the areas of anti-counterfeiting and information encryption. These findings provide deep insights into the excited-state dynamics and energy transfer of Er3+ in NaYF4:Yb/Er/Tm nanocrystals upon 980 nm pulse excitation, which may pave the way for designing multicolor UC materials toward versatile applications.

Comparison of the Differences between Two-Photon Excitation, Upconversion, and Conventional Photodynamic Therapy on Cancers in In Vitro and In Vivo Studies

Photodynamic therapy (PDT) is a minimally invasive treatment for several diseases. It combines light energy with a photosensitizer (PS) to destroy the targeted cells or tissues. A PS itself is a non-toxic substance, but it becomes toxic to the target cells through the activation of light at a specific wavelength. There are some limitations of PDT, although it has been used in clinical studies for a long time. Two-photon excitation (TPE) and upconversion (UC) for PDT have been recently developed. A TPE nanoparticle-based PS combines the advantages of TPE and nanotechnology that has emerged as an attractive therapeutic agent for near-infrared red (NIR) light-excited PDT, whilst UC is also used for the NIR light-triggered drug release, activation of 'caged' imaging, or therapeutic molecules during PDT process for the diagnosis, imaging, and treatment of cancers.

METHODS

Nine electronic databases were searched, including WanFang Data, PubMed, Science Direct, Scopus, Web of Science, Springer Link, SciFinder, and China National Knowledge Infrastructure (CNKI), without any language constraints. TPE and UCNP were evaluated to determine if they had different effects from PDT on cancers. All eligible studies were analyzed and summarized in this review.

RESULTS

TPE-PDT and UCNP-PDT have a high cell or tissue penetration ability through the excitation of NIR light to activate PS molecules. This is much better than the conventional PDT induced by visible or ultraviolet (UV) light. These studies showed a greater PDT efficacy, which was determined by enhanced generation of reactive oxygen species (ROS) and reduced cell viability, as well as inhibited abnormal cell growth for the treatment of cancers.

CONCLUSIONS

Conventional PDT involves Type I and Type II reactions for the generation of ROS in the treatment of cancer cells, but there are some limitations. Recently, TPE-PDT and UCNP-PDT have been developed to overcome these problems with the help of nanotechnology in in vitro and in vivo studies.

Near-infrared-driven upconversion nanoparticles with photocatalysts through water-splitting towards cancer treatment

Water splitting is promising, especially for energy and environmental applications; however, there are limited studies on the link between water splitting and cancer treatment. Upconversion nanoparticles (UCNPs) can be used to convert near-infrared (NIR) light to ultraviolet (UV) or visible (Vis) light and have great potential for biomedical applications because of their profound penetration ability, theranostic approaches, low self-fluorescence background, reduced damage to biological tissue, and low toxicity. UCNPs with photocatalytic materials can enhance the photocatalytic activities that generate a shorter wavelength to increase the tissue penetration depth in the biological microenvironment under NIR light irradiation. Moreover, UCNPs with a photosensitizer can absorb NIR light and convert it into UV/vis light and emit upconverted photons, which excite the photoinitiator to create H2, O2, and/or OH˙ via water splitting processes when exposed to NIR irradiation. Therefore, combining UCNPs with intensified photocatalytic and photoinitiator materials may be a promising therapeutic approach for cancer treatment. This review provides a novel strategy for explaining the principles and mechanisms of UCNPs and NIR-driven UCNPs with photocatalytic materials through water splitting to achieve therapeutic outcomes for clinical applications. Moreover, the challenges and future perspectives of UCNP-based photocatalytic materials for water splitting for cancer treatment are discussed in this review.

Unveiling the Spatiotemporal and Dose Responses within a Single Live Cancer Cell to Photoswitchable Upconversion Nanoparticle Therapeutics Using Hybrid Hyperspectral Stimulated Raman Scattering and Transient Absorption Microscopy

Photodynamic therapy (PDT) provides an alternative approach to targeted cancer treatment, but the therapeutic mechanism of advanced nanodrugs applied to live cells and tissue is still not well understood. Herein, we employ the hybrid hyperspectral stimulated Raman scattering (SRS) and transient absorption (TA) microscopy developed for real-time in vivo visualization of the dynamic interplay between the unique photoswichable lanthanide-doped upconversion nanoparticle-conjugated rose bengal and triphenylphosphonium (LD-UCNP@CS-Rb-TPP) probe synthesized and live cancer cells. The Langmuir pharmacokinetic model associated with SRS/TA imaging is built to quantitatively track the uptakes and pharmacokinetics of LD-UCNP@CS-Rb-TPP within cancer cells. Rapid SRS/TA imaging quantifies the endocytic internalization rates of the LD-UCNP@CS-Rb-TPP probe in individual HeLa cells, and the translocation of LD-UCNP@CS-Rb-TPP from mitochondria to cell nuclei monitored during PDT can be associated with mitochondria fragmentations and the increased nuclear membrane permeability, cascading the dual organelle ablations in cancer cells. The real-time SRS spectral changes of cellular components (e.g., proteins, lipids, and DNA) observed reflect the PDT-induced oxidative damage and the dose-dependent death pattern within a single live cancer cell, thereby facilitating the real-time screening of optimal light dose and illumination duration controls in PDT. This study provides new insights into the further understanding of drug delivery and therapeutic mechanisms of photoswitchable LD-UCNP nanomedicine in live cancer cells, which are critical in the optimization of nanodrug formulations and development of precision cancer treatment in PDT.

Thermal properties of nanofluids using hydrophilic and hydrophobic LiYF4:Yb/Er upconverting nanoparticles

Luminescent nanoparticles have shown great potential for thermal sensing in bio-applications. Nonetheless, these materials lack water dispersibility that can be overcome by modifying their surface properties with water dispersible molecules such as cysteine. Herein, we employ LiYF4:Er3+/Yb3+ upconverting nanoparticles (UCNPs) capped with oleate or modified with cysteine dispersed in cyclohexane or in water, respectively, as thermal probes. Upconversion emission was used to sense temperature with a relative thermal sensitivity of ∼1.24% K-1 (at 300 K) and a temperature uncertainty of 0.8 K for the oleate capped and of 0.5 K for cysteine modified NPs. To study the effect of the cysteine modification in the heat transfer processes, the thermal conductivity of the nanofluids was determined, yielding 0.123(6) W m-1 K-1 for the oleate capped UCNPs dispersed in cyclohexane and 0.50(7) W m-1 K-1 for the cysteine modified UCNPs dispersed in water. Moreover, through the heating curves, the nanofluids' thermal resistances were estimated, showing that the cysteine modification partially prevents heat transfer.

Discovery of N-(phenylsulfonyl)thiazole-2-carboxamides as potent α-glucosidase inhibitors

In a search for novel nonsugar α-glucosidase inhibitors for diabetes treatment, a series of N-(phenylsulfonyl)thiazole-2-carboxamide derivatives were designed and synthesized, the α-glucosidase inhibitory activities were then evaluated. Several compounds with promising α-glucosidase inhibitory effects were identified. Among these, compound W24 which shows low cytotoxicity and good α-glucosidase inhibitory activity with an IC50 value of 53.0 ± 7.7 μM, is more competitive compared with the commercially available drug acarbose (IC50  = 228.3 ± 9.2 μM). W24 was identified as a promising candidate in the development of α-glucosidase inhibitors. Molecular docking studies and molecular dynamics simulation were also performed to reveal the binding pattern of the active compound to α-glucosidase, and the binding free energy of the best compound W24 was 36.3403 ± 3.91 kcal/mol.

Fluorescence immunoassay for simultaneous detection typical β-agonists in animal derived food using blue-green upconversion nanoparticles as labels

Common typical β-agonists mainly include ractopamine (RAC), salbutamol (SAL), and clenbuterol (CLB). In view of the harm to human health causes by the ingestion of animal derived food containing β-agonists, and a series of regulations have been issued to restrict the usage of β-agonists as growth promoters. In this work, a fluorescence immunoassay is developed for the simultaneous detection of typical β-agonists based on blue-green upconversion nanoparticles (UCNPs) combine with magnetic separation. Here, blue-green UCNPs act as a signal amplification source, and magnetic polystyrene microspheres (MPMs) act as an ideal separation medium. Based on a competitive form, capture probe competes (RAC-OVA@MPMs and SAL-OVA@MPMs) with targets to bind corresponding signal probe (anti-RAC antibody@NaYF4:Yb, Tm UCNPs and anti-SAL antibody@NaYF4:Yb, Er UCNPs). The fluorescence difference values of the competitive immune-complex obtained via magnetic separation at 483 nm and 550 nm are proportional to concentrations of RAC and SAL, respectively. The immunoassay has the wide detection linear range from 0.001 to 100 μg L-1, and the low limit of detection (LOD) is 5.04 × 10-4 μg L-1 for RAC, 1.97 × 10-4 μg L-1 for SAL, respectively. Meanwhile, use of antibody with same recognition ability for SAL and CLB makes that the fluorescence immunoassay can achieve simultaneous detection of three typical β-agonists (RAC, SAL, and CLB). This fluorescence immunoassay has good application value and practicability for simultaneous detection of typical β-agonists in animal derived food.

Multifunctional mesoporous silica nanoparticles for biomedical applications

Mesoporous silica nanoparticles (MSNs) are recognized as a prime example of nanotechnology applied in the biomedical field, due to their easily tunable structure and composition, diverse surface functionalization properties, and excellent biocompatibility. Over the past two decades, researchers have developed a wide variety of MSNs-based nanoplatforms through careful design and controlled preparation techniques, demonstrating their adaptability to various biomedical application scenarios. With the continuous breakthroughs of MSNs in the fields of biosensing, disease diagnosis and treatment, tissue engineering, etc., MSNs are gradually moving from basic research to clinical trials. In this review, we provide a detailed summary of MSNs in the biomedical field, beginning with a comprehensive overview of their development history. We then discuss the types of MSNs-based nanostructured architectures, as well as the classification of MSNs-based nanocomposites according to the elements existed in various inorganic functional components. Subsequently, we summarize the primary purposes of surface-functionalized modifications of MSNs. In the following, we discuss the biomedical applications of MSNs, and highlight the MSNs-based targeted therapeutic modalities currently developed. Given the importance of clinical translation, we also summarize the progress of MSNs in clinical trials. Finally, we take a perspective on the future direction and remaining challenges of MSNs in the biomedical field.

A tumor targeted antifouling upconversion nanoplatform for fluorescence imaging and precise photodynamic therapy triggered by NIR laser

Photodynamic therapy (PDT) has been considered as a promising treatment in the biomedical field because of low toxicity to normal tissues and minor trauma area. However, the PDT effect of materials is greatly affected by many factors, such as nonspecific adsorption and poor light penetration, etc. In this work, an intelligent nano platform has been constructed based on upconversion nanoparticles (UCNPs) loaded with a large amount of photosensitizers Ce6, which could specifically light up tumor tissues and stimulate the production of reactive oxygen species (ROS) under 980 nm near-infrared (NIR) irradiation, exhibiting a conspicuous imaging and therapeutic effect of PDT treatment for deep tumors. An excellent anti-fouling performance in complex biological substrate was obtained upon the judicious introduction of anti-fouling peptide, which also contributed to the improved PDT efficiency. In addition, the specificity of nanoplatform to malignant breast cancer cells was realized by modification of polypeptide targeting for HER2. This anti-fouling nanoplatform provided an original paradigm for the development of fluorescence imaging and PDT for deep tumor tissue with high targeting and therapeutic efficacy, promising to be used in the early therapy of malignant breast cancer specifically.

Development of an Fe2+ sensing system based on the inner filter effect between upconverting nanoparticles and ferrozine

The ferrozine (FZ) assay is a vital oxidation state-specific colorimetric assay for the quantification of Fe2+ ions in environmental samples due to its sharp increase in absorbance at 562 nm upon addition of Fe2+. However, it has yet to be applied to corresponding fluoresence assays which typically offer higher sensitivites and lower detection limits. In this article we present for the first time its pairing with upconverting luminescent nanomaterials to enable detection of Fe2+via the inner filter effect using a low-power continuous wave diode laser (45 mW). Upon near infra-red excitation at 980 nm, the overlap of the upconversion emission of Er3+ at approximately 545 nm and the absorbance of the FZ:Fe2+ complex at 562 nm enabled measurement in the change of UCNP emission response as a function of Fe2+ concentration in a ratiometric manner. We first applied large, ultra-bright poly(acrylic acid) (PAA)-capped Gd2O2S:Yb3+,Er3+ UCNPs upconverting nanoparticles (UCNPs) for the detection of Fe2+ using FZ as the acceptor. The probe displayed good selectivity and sensitivity for Fe2+, with a low limit of detection (LoD) of 2.74 μM. Analogous results employing smaller (31 nm) PAA-capped hexagonal-phase NaYF4:Yb3+,Er3+ UCNPs synthesised in our lab were achieved, with a lower LoD towards Fe2+ of 1.43 μM. These results illustrate how the ratiometric nature of the system means it is applicable over a range of particle sizes, brightnesses and nanoparticle host matrices. Preliminary investigations also found the probes capable of detecting micromolar concentrations of Fe2+ in turbid solutions.

Lanthanide molecular cluster-aggregates as the next generation of optical materials

In this perspective, we provide an overview of the recent achievements in luminescent lanthanide-based molecular cluster-aggregates (MCAs) and illustrate why MCAs can be seen as the next generation of highly efficient optical materials. MCAs are high nuclearity compounds composed of rigid multinuclear metal cores encapsulated by organic ligands. The combination of high nuclearity and molecular structure makes MCAs an ideal class of compounds that can unify the properties of traditional nanoparticles and small molecules. By bridging the gap between both domains, MCAs intrinsically retain unique features with tremendous impacts on their optical properties. Although homometallic luminescent MCAs have been extensively studied since the late 1990s, it was only recently that heterometallic luminescent MCAs were pioneered as tunable luminescent materials. These heterometallic systems have shown tremendous impacts in areas such as anti-counterfeiting materials, luminescent thermometry, and molecular upconversion, thus representing a new generation of lanthanide-based optical materials.

Recent advances of lanthanide nanomaterials in Tumor NIR fluorescence detection and treatment

Lanthanide nanomaterials have garnered significant attention from researchers among the main near-infrared (NIR) fluorescent nanomaterials due to their excellent chemical and fluorescence stability, narrow emission band, adjustable luminescence color, and long lifetime. In recent years, with the preparation, functional modification, and fluorescence improvement of lanthanide materials, great progress has been made in their application in the biomedical field. This review focuses on the latest progress of lanthanide nanomaterials in tumor diagnosis and treatment, as well as the interaction mechanism between fluorescence and biological tissues. We introduce a set of efficient strategies for improving the fluorescence properties of lanthanide nanomaterials and discuss some representative in-depth research work in detail, showcasing their superiority in early detection of ultra-small tumors, phototherapy, and real-time guidance for surgical resection. However, lanthanide nanomaterials have only realized a portion of their potential in tumor applications so far. Therefore, we discuss promising methods for further improving the performance of lanthanide nanomaterials and their future development directions.

Engineering CsPbX3 (X = Cl, Br, I) Quantum Dot-Embedded Borosilicate Glass through Self-Crystallization Facilitated by NaF as a Phosphor for Full-Color Illumination and Laser-Driven Projection Displays

All inorganic perovskite (CsPbX₃, X = Cl, Br, I) quantum dot (QD) glass samples are considered the next generation of lighting materials for their excellent luminescence properties and stability, but crystallization conditions are difficult to control, which often leads to the inhomogeneous crystallinity of QDs. Here, we provided evidence that the presence of sodium fluoride induced self-crystallization of CsPbBr₃ QDs during routine glass formation without the need for additional heat treatment. We showed that NaF simultaneously affected the network structure of glass and promoted the formation of CsPbBr₃ QDs, that is, Na⁺ ions entered the glass network skeleton, partially interrupting the network structure, while the strong electronegativity of F^- ions attracted Cs⁺ and Pb²⁺ ions into the gaps formed in the glass networks that had been loosened up by Na⁺ ions, which reduced the activation energy of crystallization processes. Our results showed that NaF-induced CsPbBr₃ QDs glass had excellent thermal stability, high photoluminescence quantum efficiency (49%), and luminescent stability under high-power laser irradiation. Finally, this work also demonstrated the general applicability of this method in the making of a series of CsPbX₃ (X = Cl, Br, I) QD glass samples by NaF-induced self-crystallization, which drastically expanded the color gamut to a range of full spectrum for luminescence and laser-driven projection displays. We believe that the work presented here represents a new direction for the research and development of full-color gamut inorganic perovskite quantum dot glass samples, which could have a significant impact on the future applications of laser-driven projection displays as well.

Plasmonic Metal Nanostructures Meet Triplet-Triplet Annihilation-Based Photon Upconversion Systems: Performance Improvements and Application Trends

Improving the performance of upconversion systems based on triplet-triplet annihilation (TTA-UC) can have far-reaching implications for various fields, including solar devices, nano-bioimaging, and nanotherapy. This review focuses on the use of localized surface plasmon (LSP) resonance of metal nanostructures to enhance the performance of TTA-UC systems and explores their potential applications. After introducing the basic driving mechanism of TTA-UC and typical sensitizers used in these systems, we discuss recent studies that have utilized new sensitizers with distinct characteristics. Furthermore, we confirm that the enhancement in upconverted emission can be explained, at least in part, by the mechanism of "metal-enhanced fluorescence", which is attributed to LSP resonance-induced fluorescence enhancement. Next, we describe selected experiments that demonstrate the enhancement in upconverted emission in plasmonic TTA-UC systems, as well as the emerging trends in their application. We present specific examples of studies in which the enhancement in upconverted emission has significantly improved the performance of photocatalysts under both sunlight and indoor lighting. Additionally, we discuss the potential for future developments in plasmonic TTA-UC systems.

Progress in Nano-Biosensors for Non-Invasive Monitoring of Stem Cell Differentiation

Non-invasive, non-destructive, and label-free sensing techniques are required to monitor real-time stem cell differentiation. However, conventional analysis methods, such as immunocytochemistry, polymerase chain reaction, and Western blot, involve invasive processes and are complicated and time-consuming. Unlike traditional cellular sensing methods, electrochemical and optical sensing techniques allow non-invasive qualitative identification of cellular phenotypes and quantitative analysis of stem cell differentiation. In addition, various nano- and micromaterials with cell-friendly properties can greatly improve the performance of existing sensors. This review focuses on nano- and micromaterials that have been reported to improve sensing capabilities, including sensitivity and selectivity, of biosensors towards target analytes associated with specific stem cell differentiation. The information presented aims to motivate further research into nano-and micromaterials with advantageous properties for developing or improving existing nano-biosensors to achieve the practical evaluation of stem cell differentiation and efficient stem cell-based therapies.

Triplet-Triplet Annihilation Upconversion in a Porphyrinic Molecular Container

Triplet-triplet annihilation-based molecular photon upconversion (TTA-UC) is a photophysical phenomenon that can yield high-energy emitting photons from low-energy incident light. TTA-UC is believed to fuse two triplet excitons into a singlet exciton through several consecutive energy-conversion processes. When organic aromatic dyes─i.e., sensitizers and annihilators─are used in TTA-UC, intermolecular distances, as well as relative orientations between the two chromophores, are important in an attempt to attain high upconversion efficiencies. Herein, we demonstrate a host-guest strategy─e.g., a cage-like molecular container incorporating two porphyrinic sensitizers and encapsulating two perylene emitters inside its cavity─to harness photon upconversion. Central to this design is tailoring the cavity size (9.6-10.4 Å) of the molecular container so that it can host two annihilators with a suitable [π···π] distance (3.2-3.5 Å). The formation of a complex with a host:guest ratio of 1:2 between a porphyrinic molecular container and perylene was confirmed by NMR spectroscopy, mass spectrometry, and isothermal titration calorimetry (ITC) as well as by DFT calculations. We have obtained TTA-UC yielding blue emission at 470 nm when the complex is excited with low-energy photons. This proof-of-concept demonstrates that TTA-UC can take place in one supermolecule by bringing together the sensitizers and annihilators. Our investigations open up some new opportunities for addressing several issues associated with supramolecular photon upconversion, such as sample concentrations, molecular aggregation, and penetration depths, which have relevance to biological imaging applications.

Population Control of Upconversion Energy Transfer for Stimulation Emission Depletion Nanoscopy

Upconverting stimulated emission depletion microscopy (U-STED) is emerging as an effective approach for super-resolution imaging due to its significantly low depletion power and its ability to surpass the limitations of the square-root law and achieve higher resolution. Though the compelling performance, a trade-off between the spatial resolution and imaging quality in U-STED has been recognized in restricting the usability due to the low excitation power drove high depletion efficiency. Moreover, it is a burden to search for the right power relying on trial and error as the underpinning mechanism is unknown. Here, a method is proposed that can easily predict the ideal excitation power for high depletion efficiency with the assistance of the non-saturate excitation based on the dynamic cross-relaxation (CR) energy transfer of upconversion nanoparticles. This allows the authors to employ the rate equation model to simulate the populations of each relevant energy state of lanthanides and predict the ideal excitation power for high depletion efficiency. The authors demonstrate that the resolution of STED with the assistance of nonsaturated confocal super-resolution results can easily achieve the highest resolution of sub-40 nm, 1/24^th of the excitation wavelengths. The finding on the CR effect provides opportunities for population control in realizing low-power high-resolution nanoscopy.

Biological Activities and Biocompatibility Properties of Eu(OH)3 and Tb(OH)3 Nanorods: Evaluation for Wound Healing Applications

Rare earth elements have shown promising results in both bio-imaging and therapy applications due to their superior magnetic, catalytic, and optical properties. In recent years, since lanthanide-based nanomaterials have effective results in wound healing, it has become necessary to investigate the different properties of these nanoparticles. The aim of this study is to investigate the antimicrobial, antibiofilm, and biocompability of Eu(OH)₃ and Tb(OH)₃ nanorods, which have a high potential by triggering angiogenesis and providing ROS activity, especially in wound healing. For this purpose, nanorods were obtained by the microwave-assisted synthesis method. Structural characterizations of Eu(OH)₃ and Tb(OH)₃ nanorods were performed by FT-IR, XRD, and TG-DTA methods, and morphological characterizations were performed by SEM-EDX. Microorganisms that are likely to be present in the wound environment were selected for the antimicrobial activities of the nanorods. The highest efficiency of nanorods with the disc diffusion method was shown against Pseudomonas aeruginosa ATCC 27,853 and Candida albicans ATCC 10,231 microorganisms. One of the problems frequently encountered in an infected wound environment is the formation of bacterial biofilm. Eu(OH)₃ nanorods inhibited 77.5 ± 0.43% and Tb(OH)₃ nanorods 76.16 ± 0.60% of Pseudomonas aeruginosa ATCC 27,853 biofilms. These results show promise for the development of biomaterials with superior properties by adding these nanorods to wound dressings that will be developed especially for wounds with microbial infection. Eu(OH)₃ nanorods are more toxic than Tb(OH)₃ nanorods on NCTC L929 cells. At concentrations of 500 µg/ml and above, both nanorods are toxic to cells.

CaGdF5 based heterogeneous core@shell upconversion nanoparticles for sensitive temperature measurement

Lanthanide-doped upconversion nanoparticles (UCNPs) have attracted great attention in temperature sensing because of their widespread thermal quenching effect (TQE), a phenomenon in which luminescence intensity decreases as the temperature increases. However, enhancing the TQE of activated ions without changing the dopants or the host is still challenging. Herein, Yb³⁺ and Er³⁺ codoped UCNPs in a cubic CaGdF₅ host were synthesized by a coprecipitation method for optical temperature sensing. Compared with the homogeneous shell (CaGdF₅), those heterogeneous (CaF₂) shelled UCNPs exhibited stronger upconversion luminescence (UCL) due to the significantly reduced multiphonon nonradiative relaxation. Further, we investigated the effects of homogeneous and heterogeneous shells on TQE. The relationship between the intensity ratio of the green emission bands of Er³⁺ ions (²H_11/2 → ⁴I_15/2 and ⁴S_3/2 → ⁴I_15/2) and temperature are obtained for these two core@shell UCNPs. The results demonstrated that the UCNPs with CaF₂ shells are more sensitive to temperature in the 200-300 K. The maximum thermal sensitivity of CaGdF₅:Yb,Er@CaF₂ could reach 2.2% K^-1 at 200 K. These results indicate that the heterogeneous core@shell UCNPs are promising for use as optical temperature sensors.

Tuning the Red-to-Green-Upconversion Luminescence Intensity Ratio of Na3ScF6: 20% Yb3+, 2% Er3+ Particles by Changes in Size

Na₃ScF₆: 20% Yb³⁺, 2% Er³⁺ samples were synthesized with different reaction times and reaction temperatures using the solvothermal method. We carried out a series of tests on Na3ScF6 crystals. The XRD patterns showed that the monoclinic phases of the Na₃ScF₆ samples could be synthesized under different reaction conditions, and doping with Yb³⁺ ions and Er³⁺ ions did not change the crystal structures. The SEM images showed that the sizes of the samples gradually increased with reaction time and reaction temperature. The fluorescence spectra showed that the emission peaks of the prepared samples under 980 nm near-infrared (NIR) excitation were centered at 520 nm/543 nm and 654 nm, corresponding to the ²H_11/2/⁴S_3/2→⁴I_15/2 and ⁴F_9/2→⁴I_15/2 transitions, respectively. With the increasing size of the samples, the emission intensities at 654 nm increased and the luminescence colors changed from green to red; at the same time, the red-to-green luminescence intensity ratios (IR/IG ratios) increased from 0.435 to 15.106-by as much as ~34.7 times. Therefore, this paper provides a scheme for tuning the IR/IG ratios of Na₃ScF₆: 20% Yb³⁺, 2% Er³⁺ samples by changing their sizes, making it possible to enhance the intensity of red upconversion, which has great potential for the study of color displays and lighting.

Significant Enhancement of the Upconversion Emission in Highly Er3+ -Doped Nanoparticles at Cryogenic Temperatures

Relatively low efficiency is the bottleneck for the application of lanthanide-doped upconversion nanoparticles (UCNPs). The high-level doping strategy realized in recent years has not improved the efficiency as much as expected. It is argued that cross relaxation (CR) is not detrimental to upconversion. Here we combine theoretical simulation and spectroscopy to elucidate the role of CR in upconversion process of Er³⁺ highly doped (HD) UCNPs. It is found that if CR is purposively suppressed, upconversion efficiency can be significantly improved. Specifically, we demonstrate experimentally that inhibition of CR by introducing cryogenic environment (40 K) enhances upconversion emission by more than two orders of magnitude. This work not only elucidates the nature of CR and its non-negligible adverse effects, but also provides a new perspective for improving upconversion efficiency. The result can be directly applied to cryogenic imaging and wide range temperature sensing.

Upconversion nanoparticle-based optogenetic nanosystem for photodynamic therapy and cascade gene therapy

Most photosensitizer molecules used for the photodynamic therapy (PDT) are chemically-synthesized organic photosensitizer dyes which show several limitations such as unsatisfactory cell uptake, weak selectivity and off-target phototoxicity. Recently, genetically-encoded photosensitizers have attracted increasing attentions which provide the targeted cell elimination with single-cell precision. However, their applications are mainly limited by the shallow tissue penetration depth of the excitation light and the low cell apoptosis ratio. Herein, we developed a feasible upconversion nanoparticle (UCNP)-based optogenetic nanosystem with three-in-one functional integration: bio-imaging, NIR-triggered PDT and cascade gene therapy. Firstly, the mitochondria-targeted genetically-encoded photosensitizer was constructed and transfected into cancer cells. Then, the functional upconversion nanoprobe was constructed with the mitochondria targetability and then the siRNA was loaded on the surface of UCNPs via the reactive oxygen species (ROSs) sensitive chemical bond. After the transfection and incubation, both of the upconversion nanoprobe and the genetically-encoded photosensitizer were accumulated in the mitochondria of cancer cells. Under the NIR irradiation, the emission of UCNPs could excite the expressed protein photosensitizer to generate ROSs which then stimulated the release of siRNAs in a controllable manner, achieving PDT and cascade gene therapy. Since the generation of ROSs and the release of siRNA occurred in the mitochondria in-situ, the mitochondria-mediated cell apoptosis signal pathway would be activated to induce cell apoptosis and subsequently inhibit tumor growth. To the best of our knowledge, this is the first report about NIR laser-activated, organelle-localized genetically-encoded photosensitizers developed for cascade therapy, which will widen the application of optogenetic tools in the tumor therapy. STATEMENT OF SIGNIFICANCE: The application of genetically-encoded photosensitizers in photodynamic therapy (PDT) is mainly limited by the shallow tissue penetration depth of the excitation light and unsatisfactory therapeutic performance. In this experiment, we developed an upconversion nanoparticles-based optogenetic nanosystem to enhance the PDT and cascade gene therapy for malignant tumors. The expressed genetically-encoded photosensitizers were accumulated in the mitochondria, which were activated in situ by the upconversion nanoprobe. Besides, the photogenerated reactive oxygen species (ROSs) stimulated the release of siRNAs in a controllable manner. To the best of our knowledge, this is the first report about NIR laser-activated, genetically-encoded photosensitizers developed for organelle-localized controllable cascade therapy. We hope this work can accelerate the application of genetically-encoded photosensitizers in the tumor therapy.

Recent advances in tumor biomarker detection by lanthanide upconversion nanoparticles

Early tumor diagnosis could reliably predict the behavior of tumors and significantly reduce their mortality. Due to the response to early cancerous changes at the molecular or cellular level, tumor biomarkers, including small molecules, proteins, nucleic acids, exosomes, and circulating tumor cells, have been employed as powerful tools for early cancer diagnosis. Therefore, exploring new approaches to detect tumor biomarkers has attracted a great deal of research interest. Lanthanide upconversion nanoparticles (UCNPs) provide numerous opportunities for bioanalytical applications. When excited by low-energy near-infrared light, UCNPs exhibit several unique properties, such as large anti-Stoke shifts, sharp emission lines, long luminescence lifetimes, resistance to photobleaching, and the absence of autofluorescence. Based on these excellent properties, UCNPs have demonstrated great sensitivity and selectivity in detecting tumor biomarkers. In this review, an overview of recent advances in tumor biomarker detection using UCNPs has been presented. The key aspects of this review include detection mechanisms, applications in vitro and in vivo, challenges, and perspectives of UCNP-based tumor biomarker detection.

Ratiometric upconversion luminescence nanoprobes from construction to sensing, imaging, and phototherapeutics

In terms of the combined advantages of upconversion luminescence (UCL) properties and dual-signal ratiometric outputs toward specific targets, the ratiometric UCL nanoprobes exhibit significant applications. This review summarizes and discusses the recent advances in ratiometric UCL nanoprobes, mainly including the construction of nanoprobe systems for sensing, imaging, and phototherapeutics. First, the construction strategies are introduced, involving different types of nanoprobe systems, construction methods, and ratiometric dual-signal modes. Then, the sensing applications are summarized, involving types of targets, sensing mechanisms, sensing targets, and naked-eye visual detection of UCL colors. Afterward, the phototherapeutic applications are discussed, including bio-toxicity, bio-distribution, biosensing, and bioimaging at the level of living cells and small animals, and biomedicine therapy. Particularly, each section is commented on by discussing the state-of-the-art relevant studies on ratiometric UCL nanoprobe systems. Moreover, the current status, challenges, and perspectives in the forthcoming studies are discussed. This review facilitates the exploration of functionally luminescent nanoprobes for excellent sensing, imaging, biomedicine, and multiple applications in significant fields.

Lanthanide-Doped Upconversion Nanoparticles: Exploring A Treasure Trove of NIR-Mediated Emerging Applications

Lanthanide-doped upconversion nanoparticles (UCNPs) possess the remarkable ability to convert multiple near-infrared (NIR) photons into higher energy ultraviolet-visible (UV-vis) photons, making them a prime candidate for several advanced applications within the realm of nanotechnology. Compared to traditional organic fluorophores and quantum dots (QDs), UCNPs possess narrower emission bands (fwhm of 10-50 nm), large anti-Stokes shifts, low toxicity, high chemical stability, and resistance to photobleaching and blinking. In addition, unlike UV-vis excitation, NIR excitation is nondestructive at lower power intensities and has high tissue penetration depths (up to 2 mm) with low autofluorescence and scattering. Together, these properties make UCNPs exceedingly favored for advanced bioanalytical and theranostic applications, where these systems have been well-explored. UCNPs are also well-suited for bioimaging, optically modulating chemistries, forensic science, and other state-of-the-art research applications. In this review, an up-to-date account of emerging applications in UCNP research, beyond bioanalytical and theranostics, are presented including optogenetics, super-resolution imaging, encoded barcodes, fingerprinting, NIR vision, UCNP-assisted photochemical manipulations, optical tweezers, 3D printing, lasing, NIR-II imaging, UCNP-molecule nanohybrids, and UCNP-based persistent luminescent nanocrystals.

Inorganic Nanoparticles-Based Systems in Biomedical Applications of Stem Cells: Opportunities and Challenges

Stem cells (SC) are a kind of cells with self renewing ability and multipotent differentiation, which can differentiate into many types of cells such as osteoblast, chondrocyte, neurocyte to treat disease like osteoporosis, osteoarthritis and Alzheimer's disease. Despite the development of novel methods for inducing cell differentiation, the inefficiency and complexity of controlling differentiation of stem cells remain a serious challenge, which necessary to develop a new and alternative approach for effectively controlling the direction of stem cell differentiation in vitro and in vivo in stem cells therapy. Recent advancement in nanotechnology for developing a new class of inorganic nanoparticles that exhibit unique chemical and physical properties holds promise for the treatment of stem cells. Over the last decade, inorganic nanoparticle-based approaches against stem cells have been directed toward developing nanoparticles with drug delivery, or utilizing nanoparticles for controlled cell behaviors, and applying nanoparticles for inducing cell differentiation directly. In addition, a strategy to functionalize inorganic nanoparticles as a nanoprobe towards enhanced penetration through near-infrared light or nuclear magnetic resonance has been receiving considerable interest by means of long-term tracking stem cell in vivo. This review summarizes and highlights the recent development of these inorganic nanoparticle-based approaches as potential therapeutics for controlling differentiation of stem cells and so on for stem cell therapy, along with current opportunities and challenges that need to be overcome for their successful clinical translation.

Upconverting Nanoparticles as a New Bio-Imaging Strategy-Investigating Intracellular Trafficking of Endogenous Processes in Neural Tissue

In recent years, rare-earth-doped upconverting nanoparticles (UCNPs) have been widely used in different life sciences due to their unique properties. Nanoparticles have become a multifunctional and promising new approach to neurobiological disorders and have shown extraordinary application potential to overcome the problems related to conventional treatment strategies. This study evaluated the internalization mechanisms, bio-distribution, and neurotoxicity of NaYF₄:20%Yb³⁺,2%Er³⁺ UCNPs in rat organotypic hippocampal slices. TEM results showed that UCNPs were easily internalized by hippocampal cells and co-localized with selected organelles inside neurons and astrocytes. Moreover, the UCNPs were taken into the neurons via clathrin- and caveolae-mediated endocytosis. Propidium iodide staining and TEM analysis did not confirm the adverse effects of UCNPs on hippocampal slice viability and morphology. Therefore, UCNPs may be a potent tool for bio-imaging and testing new therapeutic strategies for brain diseases in the future.

Phonon-assisted upconversion in twisted two-dimensional semiconductors

Phonon-assisted photon upconversion (UPC) is an anti-Stokes process in which incident photons achieve higher energy emission by absorbing phonons. This letter studies phonon-assisted UPC in twisted 2D semiconductors, in which an inverted contrast between UPC and conventional photoluminescence (PL) of WSe₂ twisted bilayer is emergent. A 4-fold UPC enhancement is achieved in 5.5° twisted bilayer while PL weakens by half. Reduced interlayer exciton conversion efficiency driven by lattice relaxation, along with enhanced pump efficiency resulting from spectral redshift, lead to the rotation-angle-dependent UPC enhancement. The counterintuitive phenomenon provides a novel insight into a unique way that twisted angle affects UPC and light-matter interactions in 2D semiconductors. Furthermore, the UPC enhancement platform with various superimposable means offers an effective method for lighting bilayers and expanding the application prospect of 2D stacked van der Waals devices.

Injectable Nano Drug Delivery Systems for the Treatment of Breast Cancer

Breast cancer is the most diagnosed type of cancer, with 2.26 million cases and 685,000 deaths recorded in 2020. If left untreated, this deadly disease can metastasize to distant organs, which is the reason behind its incurability and related deaths. Currently, conventional therapies are used to treat breast cancer, but they have numerous shortcomings such as low bioavailability, short circulation time, and off-target toxicity. To address these challenges, nanomedicines are preferred and are being extensively investigated for breast cancer treatment. Nanomedicines are novel drug delivery systems that can improve drug stability, aqueous solubility, blood circulation time, controlled release, and targeted delivery at the tumoral site and enhance therapeutic safety and effectiveness. Nanoparticles (NPs) can be administered through different routes. Although the injectable route is less preferred than the oral route for drug administration, it has its advantages: it helps tailor drugs with targeted moiety, boosts payload, avoids first-pass metabolism, and improves the pharmacokinetic parameters of the active pharmaceutical ingredients. Targeted delivery of nanomedicine, closer to organelles such as the mitochondria and nuclei in breast cancer, reduces the dosage requirements and the toxic effects of chemotherapeutics. This review aims to provide the current status of the recent advances in various injectable nanomedicines for targeted treatment of breast cancer.

Rapid and ultrasensitive detection of SARS-CoV-2 spike protein based on upconversion luminescence biosensor for COVID-19 point-of-care diagnostics

Here, we firstly introduce a detection system consisting of upconversion nanoparticles (UCNPs) and Au nanorods (AuNRs) for an ultrasensitive, rapid, quantitative and on-site detection of SARS-CoV-2 spike (S) protein based on Förster resonance energy transfer (FRET) effect. Briefly, the UCNPs capture the S protein of lysed SARS-CoV-2 in the swabs and subsequently they are bound with the anti-S antibodies modified AuNRs, resulting in significant nonradiative transitions from UCNPs (donors) to AuNRs (acceptors) at 480 nm and 800 nm, respectively. Notably, the specific recognition and quantitation of S protein can be realized in minutes at 800 nm because of the low autofluorescence and high Yb-Tm energy transfer in upconversion process. Inspiringly, the limit of detection (LOD) of the S protein can reach down to 1.06 fg mL^-1, while the recognition of nucleocapsid protein is also comparable with a commercial test kit in a shorter time (only 5 min). The established strategy is technically superior to those reported point-of-care biosensors in terms of detection time, cost, and sensitivity, which paves a new avenue for future on-site rapid viral screening and point-of-care diagnostics.

Optical Properties and Concentration Quenching Mechanism of Er3+ Heavy Doped Gd2(MoO4)3 Phosphor for Green Light-Emitting Diode

Upconversion materials capable of converting low-energy excitation photons into high-energy emission photons have attracted considerable interest in recent years. However, the low upconversion luminescence seriously hinders the application of upconversion phosphors. Heavy lanthanide doping without concentration quenching represents a direct and effective method to enhance the emission intensity. In this study, Er³⁺ heavy doped Gd₂(MoO₄)₃ phosphor with a monoclinic phase was prepared by a sol-gel process. Under excitation at 976 nm, Gd₂(MoO₄)₃:Er³⁺ phosphor emitted remarkably intense green emission, and Er³⁺ concentration up to 20 mol% did not cause concentration quenching. Here, we discuss the upconversion mechanism and concentration quenching. When the Er³⁺ concentration was in the range of 30-60 mol%, the concentration quenching was governed by the electric dipole-dipole interaction, and when the concentration was greater than 60 mol%, the concentration quenching was controlled by the exchange interactions. The result provides a schematic basis for identifying a phosphor host with heavy lanthanide doping.

Advances in upconversion luminescence nanomaterial-based biosensor for virus diagnosis

Various infectious viruses have been posing a major threat to global public health, especially SARS-CoV-2, which has already claimed more than six million lives up to now. Tremendous efforts have been made to develop effective techniques for rapid and reliable pathogen detection. The unique characteristics of upconversion nanoparticles (UCNPs) pose numerous advantages when employed in biosensors, and they are a promising candidate for virus detection. Herein, this Review will discuss the recent advancement in the UCNP-based biosensors for virus and biomarkers detection. We summarize four basic principles that guide the design of UCNP-based biosensors, which are utilized with luminescent or electric responses as output signals. These strategies under fundamental mechanisms facilitate the enhancement of the sensitivity of UCNP-based biosensors. Moreover, a detailed discussion and benefits of applying UCNP in various virus bioassays will be presented. We will also address some obstacles in these detection techniques and suggest routes for progress in the field. These progressions will undoubtedly pose UCNP-based biosensors in a prominent position for providing a convenient, alternative approach to virus detection.

Urea Glass Route as a Way to Optimize YAGG:Ce3+,Cr3+,Pr3+ Nanocrystals for Persistent Luminescence Applications

A new approach for the synthesis of Y₃Al₂Ga₃O₁₂ (YAGG) nanophosphors allowing the preparation of crystallites with sizes starting from 45 nm is presented. The controllability of the energy and trap density of the resulting material samples by annealing temperature was confirmed by thermoluminescence (TL) measurements. It has been shown that the annealing of samples at temperatures up to 1300 °C does not cause any substantial growth of crystallites, still remaining below 100 nm, but leads to changes in the activation energy of the persistent luminescence (PersL) process. On the other hand, annealing above 1400 °C results in grain growth on the submicron scale, which was confirmed by X-ray powder diffraction (XRPD) and electron transmission microscopy (TEM) measurements. In addition, with an increase in the molar ratio of urea to the total amount of metals used (R), qualitative changes are observed in the PersL process occurring from the excited states of Cr³⁺ and Pr³⁺ ions. This proves the influence of the synthesis process, in particular of the metal complexation at its initial stage, on the final structure ordering in the annealed materials. These observations are linked to previously reported defects in the YAGG structure, leading to PersL.

Designing Semiconductor Nanowires for Efficient Photon Upconversion via Heterostructure Engineering

Energy upconversion via optical processes in semiconductor nanowires (NWs) is attractive for a variety of applications in nano-optoelectronics and nanophotonics. One of the main challenges is to achieve a high upconversion efficiency and, thus, a wide dynamic range of device performance, allowing efficient upconversion even under low excitation power. Here, we demonstrate that the efficiency of energy upconversion via two-photon absorption (TPA) can be drastically enhanced in core/shell NW heterostructures designed to provide a real intermediate TPA step via the band states of the narrow-bandgap region with a long carrier lifetime, fulfilling all the necessary requirements for high-efficiency two-step TPA. We show that, in radial GaAs(P)/GaNAs(P) core/shell NW heterostructures, the upconversion efficiency increases by 500 times as compared with that of the constituent materials, even under an excitation power as low as 100 mW/cm² that is comparable to the 1 sun illumination. The upconversion efficiency can be further improved by 8 times through engineering the electric-field distribution of the excitation light inside the NWs so that light absorption is maximized within the desired region of the heterostructure. This work demonstrates the effectiveness of our approach in providing efficient photon upconversion by exploring core/shell NW heterostructures, yielding an upconversion efficiency being among the highest reported in semiconductor nanostructures. Furthermore, our work provides design guidelines for enhancing efficiency of energy upconversion in NW heterostructures.

Tracking Nanoparticle Degradation across Fuel Cell Electrodes by Automated Analytical Electron Microscopy

Nanoparticles are an important class of materials that exhibit special properties arising from their high surface area-to-volume ratio. Scanning transmission electron microscopy (STEM) has played an important role in nanoparticle characterization, owing to its high spatial resolution, which allows direct visualization of composition and morphology with atomic precision. This typically comes at the cost of sample size, potentially limiting the accuracy and relevance of STEM results, as well as the ability to meaningfully track changes in properties that vary spatially. In this work, automated STEM data acquisition and analysis techniques are employed that enable physical and compositional properties of nanoparticles to be obtained at high resolution over length scales on the order of microns. This is demonstrated by studying the localized effects of potential cycling on electrocatalyst degradation across proton exchange membrane fuel cell cathodes. In contrast to conventional, manual STEM measurements, which produce particle size distributions representing hundreds of particles, these high-throughput automated methods capture tens of thousands of particles and enable nanoparticle size, number density, and composition to be measured as a function of position within the cathode. Comparing the properties of pristine and degraded fuel cells provides statistically robust evidence for the inhomogeneous nature of catalyst degradation across electrodes. These results demonstrate how high-throughput automated STEM techniques can be utilized to investigate local phenomena occurring in nanoparticle systems employed in practical devices.

NIR-Triggered Generation of Reactive Oxygen Species and Photodynamic Therapy Based on Mesoporous Silica-Coated LiYF4 Upconverting Nanoparticles

To date, the increase in reactive oxygen species (ROS) production for effectual photodynamic therapy (PDT) treatment still remains challenging. In this study, a facile and effective approach is utilized to coat mesoporous silica (mSiO₂) shell on the ligand-free upconversion nanoparticles (UCNPs) based on the LiYF₄ host material. Two kinds of mesoporous silica-coated UCNPs (UCNP@mSiO₂) that display green emission (doped with Ho³⁺) and red emission (doped with Er³⁺), respectively, were successfully synthesized and well characterized. Three photosensitizers (PSs), merocyanine 540 (MC 540), rose bengal (RB), and chlorin e6 (Ce6), with the function of absorption of green or red emission, were selected and loaded into the mSiO₂ shell of both UCNP@mSiO₂ nanomaterials. A comprehensive study for the three UCNP@mSiO₂/PS donor/acceptor pairs was performed to investigate the efficacy of fluorescence resonance energy transfer (FRET), ROS generation, and in vitro PDT using a MCF-7 cell line. ROS generation detection showed that as compared to the oleate-capped and ligand-free UCNP/PS pairs, the UCNP@mSiO₂/PS nanocarrier system demonstrated more pronounced ROS generation due to the UCNP@mSiO₂ nanoparticles in close vicinity to PS molecules and a higher loading capacity of the photosensitizer. As a result, the three LiYF₄ UCNP@mSiO₂/PS nanoplatforms displayed more prominent therapeutic efficacies in PDT by using in vitro cytotoxicity tests.

Thermoresponsive Polymeric Nanolenses Magnify the Thermal Sensitivity of Single Upconverting Nanoparticles

Lanthanide-based upconverting nanoparticles (UCNPs) are trustworthy workhorses in luminescent nanothermometry. The use of UCNPs-based nanothermometers has enabled the determination of the thermal properties of cell membranes and monitoring of in vivo thermal therapies in real time. However, UCNPs boast low thermal sensitivity and brightness, which, along with the difficulty in controlling individual UCNP remotely, make them less than ideal nanothermometers at the single-particle level. In this work, it is shown how these problems can be elegantly solved using a thermoresponsive polymeric coating. Upon decorating the surface of NaYF₄ :Er³⁺ ,Yb³⁺ UCNPs with poly(N-isopropylacrylamide) (PNIPAM), a >10-fold enhancement in optical forces is observed, allowing stable trapping and manipulation of a single UCNP in the physiological temperature range (20-45 °C). This optical force improvement is accompanied by a significant enhancement of the thermal sensitivity- a maximum value of 8% °C⁺¹ at 32 °C induced by the collapse of PNIPAM. Numerical simulations reveal that the enhancement in thermal sensitivity mainly stems from the high-refractive-index polymeric coating that behaves as a nanolens of high numerical aperture. The results in this work demonstrate how UCNP nanothermometers can be further improved by an adequate surface decoration and open a new avenue toward highly sensitive single-particle nanothermometry.

Recent Progress in Lanthanide-Doped Inorganic Perovskite Nanocrystals and Nanoheterostructures: A Future Vision of Bioimaging

All-inorganic lead halide perovskite nanocrystals have great potential in optoelectronics and photovoltaics. However, their biological applications have not been explored much owing to their poor stability and shallow penetration depth of ultraviolet (UV) excitation light into tissues. Interestingly, the combination of all-inorganic halide perovskite nanocrystals (IHP NCs) with nanoparticles consisting of lanthanide-doped matrix (Ln NPs, such as NaYF₄:Yb,Er NPs) is stable, near-infrared (NIR) excitable and emission tuneable (up-shifting emission), all of them desirable properties for biological applications. In addition, luminescence in inorganic perovskite nanomaterials has recently been sensitized via lanthanide doping. In this review, we discuss the progress of various Ln-doped all-inorganic halide perovskites (LnIHP). The unique properties of nanoheterostructures based on the interaction between IHP NCs and Ln NPs as well as those of LnIHP NCs are also detailed. Moreover, a systematic discussion of basic principles and mechanisms as well as of the recent advancements in bio-imaging based on these materials are presented. Finally, the challenges and future perspectives of bio-imaging based on NIR-triggered sensitized luminescence of IHP NCs are discussed.

Recent Advances in Aptasensors For Rapid and Sensitive Detection of Staphylococcus Aureus

The infection of Staphylococcus aureus (S.aureus) and the spread of drug-resistant bacteria pose a serious threat to global public health. Therefore, timely, rapid and accurate detection of S. aureus is of great significance for food safety, environmental monitoring, clinical diagnosis and treatment, and prevention of drug-resistant bacteria dissemination. Traditional S. aureus detection methods such as culture identification, ELISA, PCR, MALDI-TOF-MS and sequencing, etc., have good sensitivity and specificity, but they are complex to operate, requiring professionals and expensive and complex machines. Therefore, it is still challenging to develop a fast, simple, low-cost, specific and sensitive S. aureus detection method. Recent studies have demonstrated that fast, specific, low-cost, low sample volume, automated, and portable aptasensors have been widely used for S. aureus detection and have been proposed as the most attractive alternatives to their traditional detection methods. In this review, recent advances of aptasensors based on different transducer (optical and electrochemical) for S. aureus detection have been discussed in details. Furthermore, the applications of aptasensors in point-of-care testing (POCT) have also been discussed. More and more aptasensors are combined with nanomaterials as efficient transducers and amplifiers, which appears to be the development trend in aptasensors. Finally, some significant challenges for the development and application of aptasensors are outlined.

Controlling the Biological Behaviors of Polymer-Coated Upconverting Nanoparticles by Adjusting the Linker Length of Estrone Ligands

The estrone ligand is used for modifying nanoparticle surfaces to improve their targeting effect on cancer cell lines. However, to date, there is no common agreement on the ideal linker length to be used for the optimum targeting performance. In this study, we aimed to investigate the impact of poly(poly ethylene glycol methyl ether methacrylate) (PPEGMEMA) linker length on the cellular uptake behavior of polymer-coated upconverting nanoparticles (UCNPs). Different triblock terpolymers, poly(poly (ethylene glycol) methyl ether methacrylate)-block-polymethacrylic acid-block-polyethylene glycol methacrylate phosphate (PPEGMEMA_x-b-PMAA_y-b-PEGMP₃: x = 7, 15, 33, and 80; y = 16, 20, 18, and 18), were synthesized with different polymer linker chain lengths between the surface and the targeting ligand by reversible addition-fragmentation chain transfer polymerization. The estrone ligand was attached to the polymer via specific terminal conjugation. The cellular association of polymer-coated UCNPs with linker chain lengths was evaluated in MCF-7 cells by flow cytometry. Our results showed that the bioactivity of ligand modification is dependent on the length of the polymer linker. The shortest polymer PPEGMEMA₇-b-PMAA₁₆-b-PEGMP₃ with estrone at the end of the polymer chain was found to have the best cellular association behavior in the estrogen receptor (ER)α-positive expression cell line MCF-7. Additionally, the anticancer drug doxorubicin•HCl was encapsulated in the nanocarrier to evaluate the 2D and 3D cytotoxicity. The results showed that estrone modification could efficiently improve the cellular uptake in ERα-positive expression cell lines and in 3D spheroid models.

Single Small Extracellular Vesicle (sEV) Quantification by Upconversion Nanoparticles

Cancer-derived small extracellular vesicles (sEVs) are potential circulating biomarkers in liquid biopsies. However, their small sizes, low abundance, and heterogeneity in molecular makeups pose major technical challenges for detecting and characterizing them quantitatively. Here, we demonstrate a single-sEV enumeration platform using lanthanide-doped upconversion nanoparticles (UCNPs). Taking advantage of the unique optical properties of UCNPs and the background-eliminating property of total internal reflection fluorescence (TIRF) imaging technique, a single-sEV assay recorded a limit of detection 1.8 × 10⁶ EVs/mL, which was nearly 3 orders of magnitude lower than the standard enzyme-linked immunosorbent assay (ELISA). Its specificity was validated by the difference between EpCAM-positive and EpCAM-negative sEVs. The accuracy of the UCNP-based single-sEV assay was benchmarked with immunomagnetic-beads flow cytometry, showing a high correlation (R²> 0.99). The platform is suitable for evaluating the heterogeneous antigen expression of sEV and can be easily adapted for biomarker discoveries and disease diagnosis.

Multi-variable compensated quantum yield measurements of upconverting nanoparticles with high dynamic range: a systematic approach

Non-linear materials such as upconverting nanoparticles (UCNPs) are emerging technology with fast-growing applications in various fields. The power density dependence of the emission quantum yield (QY) of these non-linear materials makes them challenging to characterize using currently available commercial QY systems. We propose a multimodal system to measure QY over a wide dynamic range (1:104), which takes into account and compensates for various distorting parameters (scattering, beam profile, inner filter effect and bandwidth of emission lines). For this, a beam shaping approach enabling speckle free beam profiles of two different sizes (530 µm or 106 µm) was employed. This provides low noise high-resolution QY curves. In particular, at low power densities, a signal-to-noise ratio of >50 was found. A Tm-based core-shell UCNP with excitation at 976 nm and emission at 804 nm was investigated with the system.

Surface modified hexagonal upconversion nanoparticles for the development of competitive assay for biodetection

Up-conversion nanoparticles (UCNPs) of sodium yttrium fluoride with ytterbium and erbium ions as sensitizer and activator (β-NaYF₄/Yb³⁺/Er³⁺) have been synthesised by a solvothermal method. The synthesised particles were found to be highly uniform in size (~50 nm) and of hexagonal crystal phase producing strong up-conversion luminescence dominated in the green wavelength region. During the synthesis, photoluminescence properties of the reaction mixture were monitored at regular intervals to ensure the required particle size distribution and luminescence efficiency. The hydrophobic particles thus obtained were modified by coating with silica, yielding particles that were stable in aqueous media. The silica coated UCNPs were further modified with maleimide-polyethylene glycol-silane (mal-PEG-silane) to provide thiol reactive surface groups. The silanized, maleimide-bearing UCNPs were effective for conjugating to reductively-cleaved half antibodies against ofloxacin, a veterinary antibiotic, to produce photoluminescent nanobiosensors for its detection and quantification. The speed and minimum detection concentration (~10 nM) that we report for a competitive assay of ofloxacin in this study is promising for developing sensors for this and other biomolecules.

Intelligent Nanotransducer for Deep-Tumor Hypoxia Modulation and Enhanced Dual-Photosensitizer Photodynamic Therapy

Upconversion nanoparticles (UCNPs) emerged as promising near-infrared (NIR) light-triggered nanotransducers for photodynamic therapy (PDT). However, the traditionally used 980 nm excitation source could cause an overheating effect on biological tissues, and the single photosensitizer (PS) loading could not efficiently utilize multiradiation UC luminescence, resulting in a limited efficiency of PDT in tumor tissues with hypoxia characteristics. Herein, 808 nm light-responsive Nd-sensitized UCNPs@mSiO₂@MnO₂ core-shell NPs were designed as light nanotransducers with efficient UC emission at 550 and 650 nm for PDT and downshifting luminescence at 1525 nm for second NIR (NIR-II) imaging. UC emission was fully utilized by loading dual PSs, rose bengal (RB), and zinc phthalocyanine (ZnPc), thus significantly improving the reactive oxide species (ROS) generation efficiency. Moreover, a manganese dioxide (MnO₂) shell with ultrasensitive biodegradability in an acidic tumor microenvironment (TME) can generate an amount of oxygen molecules, alleviating the symptoms of hypoxia and then improving the efficacy of PDT. Meanwhile, the biodegraded Mn²⁺ ions can further strengthen T₁-weighted magnetic resonance imaging (MRI). This work presented a new multifunctional theranostic agent for combining NIR-II/MRI imaging and 808 nm light-triggered PDT to combat the limitations of cancer therapy.

Facile Synthesis of NaYF4:Yb Up-Conversion Nanoparticles Modified with Photosensitizer and Targeting Antibody for In Vitro Photodynamic Therapy of Hepatocellular Carcinoma

Rare Earth up-conversion nanoparticles NaYF4:20%Yb,2%Er@PEI (UCNPs) were generated via a one-step hydrothermal technique at relatively reduced temperatures. Photosensitizer Ce6 and anti-EpCAM, a highly expressed monoclonal antibody in cancer stem cells of hepatocellular carcinoma, were linked to UCNP surfaces via the formation of amide linkage between carboxyl from Ce6 or anti-EpCAM and abundant amino from PEI, leading to the formation of Ps-Ce6 and anti-EpCAM-UCNPs-Ce6 nanoparticles. The synthesized nanoparticles characterized by XRD, TEM, and IR, and their zeta potential, ROS generation ability, Ce6 loading rate, and up-conversion fluorescence properties were investigated. It has been revealed that all the products were uniformly dispersed nanoparticles (25–32 nm), which crystallized primarily as hexagonal structures, and their up-conversion fluorescence spectra were similar to that of NaYF4:20%Yb,2%Er. The Ce6 loading rate in the anti-EpCAM-UCNPs-Ce6 nanoparticles was about 2.9%, thereby resulting in good ROS generation ability. For anti-EpCAM-UCNPs-Ce6, the biosafety, targeting effect, and PDT effect exposed under near-infrared (NIR) laser (980 nm) were evaluated using human liver cancer cells (BEL-7404). The results showed that it has good biocompatibility and biosafety as well as high targeting and PDT treatment efficiencies, which renders it a potential experimental material for the near-infrared PDT study.