Controlling Cyclic Dienamine Reactivity in Radical tert-Alkylation for Molecular Diversity to Synthesize Multicyclic Compounds Possessing a Quaternary Carbon

Synthesis of diverse sterically congested molecules from a single important intermediate is one of the ideal synthetic strategies in organic synthesis. In this paper, we found that γ-oxoalkyl substituted cyclohexenone derivatives (OAC) possessing a quaternary carbon are a useful key intermediate to derive both congested fused [5,6] rings and spirocycles. For this purpose, we have established an efficient synthetic method to obtain OAC by tertiary alkylation of β-methylcyclohexenone derivatives using α-bromocarbonyl compounds as a tertiary alkyl source. The key to the success of this reaction is controlling the reactivity of the dienamine intermediate. While there have been many reports on enamine reactions, dienamine reactions have not been well studied. Herein, we report controlling reactivity of dienamines and molecular diversification from OAC.

Selective copper-catalysed atom transfer radical addition (ATRA) in water under environmentally benign conditions

Simple and green conditions for copper-catalysed ATRA reactions in water have been developed. Firstly, [Cu(ADPA)(H2O)(ClO4)2] (1b, ADPA = 9-[(2,2'-dipicolylamino)methyl]anthracene) was demonstrated to be capable of selectively catalysing the ATRA of CCl4 to styrene using L-ascorbic acid (AsH2) as a reducing agent in organic solvent mixtures under ambient atmosphere. Mechanistic investigation suggested that our ATRA reaction proceeded via a single-electron transfer (SET) mechanism through an inner-sphere complex, which is consistent with the widely accepted mechanism for copper-catalysed ATRA. To perform the reaction in water as a sole solvent, a biocompatible surfactant (2 wt% Tween 20 or Tween 80) was added to improve solubility and increase the local concentration of organic reagents and the copper catalyst. Without the need for a complicated oxygen-free set-up, the ATRA reaction catalysed by this simple aqueous-dispersed system can be performed at a mild temperature (60 °C) and a relatively short reaction time (6 h) using 1 mol% of the catalyst. Furthermore, this facile protocol is also applicable for other alkene substrates demonstrated in this work, resulting in satisfactory to excellent substrate conversion and product yields.

Copper-mediated bromine atom transfer radical cyclisation of unactivated alkyl bromides

The atom transfer radical cyclisation of unactivated alkyl bromides was realized by using a catalytic system of CuBr and Me₆-TREN. This protocol is applicable to the preparation of five-membered rings from unsaturated primary and secondary bromides.

Promoting effect of water on light and phenanthroline-diphosphine Cu(I) complex-initiated iodine atom transfer cyclisation

Water can greatly facilitate the iodine atom transfer cyclisation of 2-allyloxy(or prop-2-yn-1-yloxy)-3-iodo tetrahydropyrans and tetrahydrofurans initiated by phenanthroline-diphosphine Cu(I) complexes under 455 nm light irradiation. Good yields were obtained in a mixture of acetonitrile and water (1 : 4, v/v) or in pure water, whereas no reaction took place in acetonitrile under the otherwise same conditions. The copper complexes are virtually heterogeneous in the water-dominant reaction media, which is believed to be a main reason for the beneficial effect of water.

Atom Transfer Radical Polymerization: A Mechanistic Perspective

Since its inception, atom transfer radical polymerization (ATRP) has seen continuous evolution in terms of the design of the catalyst and reaction conditions; today, it is one of the most useful techniques to prepare well-defined polymers as well as one of the most notable examples of catalysis in polymer chemistry. This Perspective highlights fundamental advances in the design of ATRP reactions and catalysts, focusing on the crucial role that mechanistic studies play in understanding, rationalizing, and predicting polymerization outcomes. A critical summary of traditional ATRP systems is provided first; we then focus on the most recent developments to improve catalyst selectivity, control polymerizations via external stimuli, and employ new photochemical or dual catalytic systems with an outlook to future research directions and open challenges.

Copper(ii) complexes of quinoline-based ligands for efficient photoredox catalysis of atom transfer radical addition (ATRA) reaction

Cu(ii)·1Q is efficient in ATRA reactions with perhaloalkanes, revealing the role of common additives (AIBN or inorganic base).

Pillared Metal-Organic Framework Initiating Intermolecular Atom-Transfer Radical Addition via Visible-Light-Induced Electron Transfer Activation of Haloalkanes

Herein, a novel metal-organic framework (MOF) with a pillared-layer structure was rationally synthesized to initiate intermolecular atom-transfer radical addition (ATRA) via photoinduced electron transfer activation of haloalkanes. The MOF synthesized via the controllable pillared-layer method is of excellent visible-light absorption and high chemical stability. Photocatalytic experiments show the atom transfer of various alkyl halides (R-X, X = Cl/Br/I) onto diverse olefins was successfully achieved to produce functional ATRA products. The mechanism and experimental investigations reveal the prepared MOF serves as an efficient photocatalyst with strong reduction potential to activate haloalkane substrates via photoinduced electron transfer, generating a highly reactive alkyl radical to trigger the ATRA reaction. Key events in the ATRA reaction, including alkyl radical photogeneration as well as halide transfer, have been further regulated to achieve preferable photocatalytic performance with higher yields, shorter reaction time, and desirable cycling capability. It is notable that the work is the first report on photoinduced electron transfer activation of halides by a MOF photocatalyst for the ATRA reaction, providing a new blueprint for MOFs to develop photoinduced radical reactions.

Direct α-Tertiary Alkylations of Ketones in a Combined Copper-Organocatalyst System

Herein, we report an efficient method for the tertiary alkylation of a ketone by using an α-bromocarbonyl compound as the tertiary alkyl source in a combined Cu-organocatalyst system. This dual catalyst system enables the addition of a tertiary alkyl radical to an enamine. Mechanistic studies revealed that the catalytically generated enamine is a key intermediate in the catalytic cycle. The developed method can be used to synthesize substituted 1,4-dicarbonyl compounds containing quaternary carbons bearing various alkyl chains.

Copper-Catalyzed Tertiary Alkylative Cyanation for the Synthesis of Cyanated Peptide Building Blocks

In this paper, we report efficient cyanation of various peptides containing the α-bromocarbonyl moiety using a Cu-catalyzed radical-based methodology employing zinc cyanide as the cyanide source. Mechanistic studies revealed that in situ formed CuCN was a key intermediate during the catalytic cycle. Our method could be useful for the synthesis of modified peptides containing quaternary carbons.

Radical fluoroalkylation reactions of (hetero)arenes and sulfides under red light photocatalysis

Fluoroalkylation reactions of (hetero)aromatics have been accomplished through the low-power illumination from red LEDs (λmax = 635 nm) of commercially available perfluoroalkyl iodides RF-I and phthalocyanine zinc salt as photocatalyst in MeCN : DMF solvent mixture. This methodology has been extended to the perfluorobutylation of sulfides. As far as we are concerned, this is the first report on a perfluoroalkylation reaction of (hetero)aromatics and sulfides under red-light photocatalysis.

Dual function of carbon tetrachloride: synthesis of chlorinated heterocycles

An efficient tandem approach to invent highly chlorinated and structurally diversified dihydropyridine fused heterocycles from easily accessible ortho-alkynylaldehydes and primary amines under metal-free conditions via four sequential bond formations is described. The proposed tandem route proceeds via a carbon tetrachloride-mediated 6-endo-dig ring closure followed by nucleophilic attack of the trichloromethyl anion.

Carbon Tetrachloride-Mediated Cyclization of (2-Alkynyl)arylaldimines for the Synthesis of Polychlorinated Nitrogen Heterocycles

An unprecedented use of carbon tetrachloride to mediate the 6-endo-dig cyclization of (2-alkynyl)arylaldimines, generated in situ from (2-alkynyl)arylaldehydes and primary amines, has been developed via formal insertion of C═N and C≡C bonds into a C-Cl bond under catalyst-free conditions, providing convenient access to a range of structurally diverse polychlorinated 1,2-dihydroisoquinolines and heteroarene-fused nitrogen heterocycles.

Visible-Light-Promoted Manganese-Catalyzed Atom Transfer Radical Cyclization of Unactivated Alkyl Iodides

An expedient visible-light-promoted atom transfer radical cyclization (ATRC) reaction of unactivated alkyl iodides facilitated by earth-abundant and inexpensive manganese catalysis is described. The practical protocol shows a broad substrate scope and good functional-group tolerance, allowing for the preparation of synthetically valuable alkenyl iodides and diquinanes under simple and mild reaction conditions. Notably, the method provides a net redox-neutral strategy for ATRC reactions that avoids classic hydrogen atom transfer mechanism.

Structural and Electronic Noninnocence of α-Diimine Ligands on Niobium for Reductive C-Cl Bond Activation and Catalytic Radical Addition Reactions

A d⁰ niobium(V) complex, NbCl₃(α-diimine) (1a), supported by a dianionic redox-active N,N'-bis(2,6-diisopropylphenyl)-1,4-diaza-2,3-dimethyl-1,3-butadiene (α-diimine) ligand (ene-diamido ligand) served as a catalyst for radical addition reactions of CCl₄ to α-olefins and cyclic alkenes, selectively affording 1:1 radical addition products in a regioselective manner. During the catalytic reaction, the α-diimine ligand smoothly released and stored an electron to control the oxidation state of the niobium center by changing between an η⁴-(σ²,π) coordination mode with a folded MN₂C₂ metallacycle and a κ²-(N,N') coordination mode with a planar MN₂C₂ metallacycle. Kinetic studies of the catalytic reaction elucidated the reaction order in the catalytic cycle: the radical addition reaction rate obeyed first-order kinetics that were dependent on the concentrations of the catalyst, styrene, and CCl₄, while a saturation effect was observed at a high CCl₄ concentration. In the presence of excess amounts of styrene, styrene coordinated in an η²-olefinic manner to the niobium center to decrease the reaction rate. No observation of oligomers or polymers of styrene and high stereoselectivity for the radical addition reaction of CCl₄ to cyclopentene suggested that the C-C bond formation proceeded inside the coordination sphere of niobium, which was in good accordance with the negative entropy value of the radical addition reaction. Furthermore, reaction of 1a with (bromomethyl)cyclopropane confirmed that both the C-Br bond activation and formation proceeded on the α-diimine-coordinated niobium center during transformation of the cyclopropylmethyl radical to a homoallyl radical. With regard to the reaction mechanism, we detected and isolated NbCl₄(α-diimine) (6a) as a transient one-electron oxidized species of 1a during reductive cleavage of the C-X bonds; in addition, the monoanionic α-diimine ligand of 6a adopted a monoanionic canonical form with selective one-electron oxidation of the dianionic ene-diamido form of the ligand in 1a.

Trifluoroethoxy-Coated Subphthalocyanine affects Trifluoromethylation of Alkenes and Alkynes even under Low-Energy Red-Light Irradiation

Photoredox chemical reactions induced by visible light have undergone a renaissance in recent years. Polypyridyl dyes such as Ir(ppy)3 and Ru(bpy)3 are key catalysts in this event, and blue- or white-light irradiation is required for the chemical transformations. However, it remains a challenge to achieve reactions under the lower energy of red light. We disclose, herein, that trifluoroethoxy-coated subphthalocyanine realizes the red-light-driven trifluoromethylation of alkenes and alkynes with trifluoromethyl iodide in good-to-high yields. Perfluoroalkylations were also achieved under red light. The reaction mechanism is discussed with the support of UV/Vis spectroscopy and cyclic voltammetry of trifluoroethoxy-coated subphthalocyanine. Light irradiation/dark study also supports the proposed mechanism.

Copper-catalyzed cascade annulation of unsaturated α-bromocarbonyls with enynals: a facile access to ketones from aldehydes

A Cu-catalyzed cascade annulation of enynals with alkenyl or alkynyl α-bromocarbonyls for the synthesis of various cyclohexenone-fused polycyclic compounds is described. Up to six new C-C bonds and four new carbocycles can be established in a single reaction, highlighting the high efficiency and step-economics of this protocol. This reaction offers a novel and straightforward entry to the synthesis of ketones featuring the addition of carbon radicals to aldehydes.

Copper-catalyzed cascade annulation between α-bromocarbonyls and biaryl or (Z)-arylvinylacetylenes enabling a direct synthesis of dibenzocycloheptanes and related compounds

Copper-catalyzed cascade annulation of γ,δ-unsaturated α-bromocarbonyls with biaryl or (Z)-arylvinylacetylenes is presented, giving an expeditious access to dibenzocycloheptanes and related compounds in moderate to high yields.

Antimicrobial surfaces grafted random copolymers with REDV peptide beneficial for endothelialization

Multifunctional surfaces have been created by surface modification and click reactions. These surfaces possess excellent hemocompatibility and endothelialization, as well as effective antimicrobial activity.

Regioisomerized atom transfer radical addition (ATRA) of olefins with dichlorofluorocarbons

The Cu(i) catalysed atom transfer radical addition of dichlorofluorocarbons to olefins via C–Cl bond homolysis is successfully carried out.

Catalytic Radical Domino Reactions in Organic Synthesis

Catalytic radical-based domino reactions represent important advances in synthetic organic chemistry. Their development benefits synthesis by providing atom- and step-economical methods to complex molecules. Intricate combinations of radical, cationic, anionic, oxidative/reductive, and transition metal mechanistic steps result in cyclizations, additions, fragmentations, ring-expansions, and rearrangements. This Perspective summarizes recent developments in the field of catalytic domino processes.

Femtosecond spectroscopy and TD-DFT calculations of CuCl42− excited states

Photoinduced processes of tetrahexylammonium tetrachlorocuprate [(C₆H₁₃)₄N]₂Cu^IICl₄ in chloro-organic solvents were investigated by steady state photolysis and femtosecond transient absorption spectroscopy, as well as TD-DFT calculations of excited terms.

Visible light-mediated atom transfer radical addition via oxidative and reductive quenching of photocatalysts

Herein, the development of visible light-mediated atom transfer radical addition (ATRA) of haloalkanes onto alkenes and alkynes using the reductive and oxidative quenching of [Ir{dF(CF(3))ppy}(2)(dtbbpy)]PF(6) and [Ru(bpy)(3)]Cl(2) is presented. Initial investigations indicated that the oxidative quenching of photocatalysts could effectively be utilized for ATRA, and since that report, the protocol has been expanded by broadening the scope of the reaction in terms of the photocatalysts, substrates, and solvents. In addition, further modifications of the reaction conditions allowed for the efficient ATRA of perfluoroalkyl iodides onto alkenes and alkynes utilizing the reductive quenching cycle of [Ru(bpy)(3)]Cl(2) with sodium ascorbate as the sacrificial electron donor. These results signify the complementary nature of the oxidative and reductive quenching pathways of photocatalysts and the ability to predictably direct reaction outcome through modification of the reaction conditions.