Direct cross-linking of silyl-functionalized cage siloxanes via nonhydrolytic siloxane bond formation for preparing nanoporous materials

Bottom-up synthesis of siloxane-based nanoporous materials from siloxane oligomers is promising for constructing well-defined structures at a molecular level. Herein, we report the synthesis of nanoporous materials consisting of cage-type siloxanes through the nonhydrolytic siloxane bond formation reaction. Cage siloxanes with double-n-ring geometries (n = 4 or 6) modified with dimethylsilyl and dimethylethoxysilyl groups are synthesized and directly cross-linked using a B(C6F5)3 catalyst, resulting in the formation of porous networks composed of alternating cage siloxane nodes and tetramethyldisiloxane (-SiMe2OSiMe2-) linkers. Compared with conventional hydrolysis and polycondensation reactions of alkoxysilyl-modified cage siloxanes under acid conditions, the non-hydrolytic condensation reaction was found favorable for the formation of porous siloxane networks without unwanted cleavage of the siloxane bonds.

Accessible Tetrathiafulvalene Moieties in a 3D Covalent Organic Framework for Enhanced Near-Infrared Photo-Thermal Conversion and Photo-Electrical Response

Redox-active tetrathiafulvalene (TTF)-based covalent organic frameworks (COFs) exhibit distinctive electrochemical and photoelectrical properties, but their prevalent two-dimensional (2D) structure with densely packed TTF moieties limits the accessibility of redox center and constrains their potential applications. To overcome this challenge, an 8-connected TTF linker (TTF-8CHO) is designed as a new building block for the construction of three-dimensional (3D) COFs. This approach led to the successful synthesis of a 3D COF with the bcu topology, designated as TTF-8CHO-COF. In comparison to its 2D counterpart employing a 4-connected TTF linker, the 3D COF design enhances access to redox sites, facilitating controlled oxidation by I2 or Au3+ to tune physical properties. When irradiated with a 0.7 W cm-2 808 nm laser, the oxidized 3D COF samples (I X - ${\mathrm{I}}_{\mathrm{X}}^{-}$ @TTF-8CHO-COF and Au NPs@TTF-8CHO-COF) demonstrated rapid temperature increases of 239.3 and 146.1 °C, respectively, which surpassed those of pristine 3D COF (65.6 °C) and the 2D COF counterpart (6.4 °C increment after I2 treatment). Furthermore, the oxidation of the 3D COF heightened its photoelectrical responsiveness under 808 nm laser irradiation. This augmentation in photothermal and photoelectrical response can be attributed to the higher concentration of TTF·+ radicals generated through the oxidation of well-exposed TTF moieties.

Hydrophobic Polyhedral Oligomeric Silsesquioxane Support Enhanced Methanol Production from CO2 Hydrogenation

The abundance of CO2 from the cement industry, power generation, petroleum production, and combustion of biomass makes it a readily available feedstock to produce chemicals and materials, although it has yet to achieve optimal development. Even though syngas (CO + H2) hydrogenation to methanol is an established industrial process, when the same catalytic system based on Cu/ZnO/Al2O3 is employed with CO2, the water formed as a byproduct reduces the activity, stability, and selectivity of the process. Here, we explored the potential of phenyl polyhedral oligomeric silsesquioxane (POSS) as a hydrophobic support of Cu/ZnO for direct CO2 hydrogenation to methanol. Mild calcination of the copper-zinc-impregnated POSS material affords the formation of CuZn-POSS nanoparticles with Cu and ZnO homogeneously dispersed with an average particle size of 7 and 15 nm supported on O-POSS and D-POSS, respectively. The composite supported on D-POSS was able to reach a 3.8% yield of methanol with a 4.4% of CO2 conversion and with selectivity as high as 87.5% within 18 h. The structural investigation of the catalytic system reveals that CuO/ZnO are electron withdrawers in the presence of the siloxane cage of POSS. The catalytic system metal-POSS is stable and recyclable under H2 reduction and CO2/H2 conditions. We tested the use of microbatch reactors in heterogeneous reactions as a rapid and effective tool for catalyst screening. The increased number of phenyls in the structure of POSS results in an increased hydrophobic character that plays a decisive role in the methanol formation after comparison with CuO/ZnO supported on reduced graphene oxide with 0% selectivity to methanol under the study conditions. The materials were characterized using scanning electron microscopy, transmission electron microscopy, attenuated total reflection Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, powder X-ray diffraction, Fourier transform infrared analysis, Brunauer-Emmett-Teller specific surface area analysis, contact angle, and thermogravimetry. The gaseous products were characterized by gas chromatography coupled with thermal conductivity detectors and flame ionization detectors.

3D Covalent Organic Frameworks with Interpenetrated pcb Topology Based on 8-Connected Cubic Nodes

The connectivity of building units for 3D covalent organic frameworks (COFs) has long been primarily 4 and 6, which have severely curtailed the structural diversity of 3D COFs. Here we demonstrate the successful design and synthesis of a porphyrin based, 8-connected building block with cubic configuration, which could be further reticulated into an unprecedented interpenetrated pcb topology by imine condensation with linear amine monomers. This study presents the first case of high-connectivity building units bearing 8-connected cubic nodes, thus greatly enriching the topological possibilities of 3D COFs.

Sonogashira Synthesis of New Porous Aromatic Framework-Entrapped Palladium Nanoparticles as Heterogeneous Catalysts for Suzuki-Miyaura Cross-Coupling

Palladium nanoparticles entrapped in porous aromatic frameworks (PAFs) or covalent organic frameworks may promote heterogeneous catalytic reactions. However, preparing such materials as active nanocatalysts usually requires additional steps for palladium entrapment and reduction. This paper reports as a new approach, a simple procedure leading to the self-entrapment of Pd nanoparticles within the PAF structure. Thus, the selected Sonogashira synthesis affords PAF-entrapped Pd nanoparticles that can catalyze the C-C Suzuki-Miyaura cross-coupling reactions. Following this new concept, PAFs were synthesized via Sonogashira cross-coupling of the tetraiodurated derivative of tetraphenyladamantane or spiro-9,9'-bifluorene with 1,6-diethynylpyrene, then characterized them using powder X-ray diffraction, diffuse reflectance infrared Fourier transform spectroscopy, X-ray photoelectron spectroscopy, high-resolution scanning transmission electron microscopy, and textural properties (i.e., adsorption-desorption isotherms). The PAF-entrapped Pd nanocatalysts showed high catalytic activity in Suzuki-Miyaura coupling reactions (demonstrated by preserving the turnover frequency values) and stability (demonstrated by palladium leaching and recycling experiments). This new approach presents a new class of PAFs with unique structural, topological, and compositional complexities as entrapped metal nanocatalysts or for other diverse applications.

Silsesquioxane-Based Triphenylamine-Linked Fluorescent Porous Polymer for Dyes Adsorption and Nitro-Aromatics Detection

In order to enrich hybrid materials, a novel fluorescent silsesquioxane-based polymer (denoted as PCS-OTS) was synthesized by Friedel-Crafts reaction starting from octavinylsilsesquioxane (OVS) with triphenylamine-functionalized silsesquioxane monomer (denoted as OTS) with AlCl₃ as catalyst. PCS-OTS possessed a high surface area of 816 m²/g and a unique bimodal pore structure. The triphenylamine unit endowed PCS-OTS with excellent luminescence, which made it act as a sensitive chemical sensor and detect p-nitrophenol with high sensitivity (K_SV = 81,230 M^-1). Moreover, PCS-OTS can significantly remove dyes, and the respective adsorption capacity for Rhodamine B (RB), Congo red (CR) and Methyl Orange (MO) is 1935, 1420 and 155 mg/g. Additionally, it could simultaneously remove multiple dyes from water by simple filtration and be easily regenerated. This hybrid porous polymer can be a good choice for water treatment.

Covalent triazine-based framework-grafted functionalized fibrous silica sphere as a solid-phase microextraction coating for simultaneous determination of fenthion and chlorpyrifos by ion mobility spectrometry

A novel covalent triazine-based framework (CTF)-grafted phenyl-functionalized fibrous silica nanosphere, KCC-1 (named as RS-2) was synthesized via a simple and effective Friedel-Crafts approach. The microporous CTF with fluorene backbone was coupled and grown uniformly on the surface of phenyl-functionalized KCC-1 to prepare a hybrid extended porous framework. The prepared materials were characterized, and FE-SEM and TEM images revealed a flower-like structure for RS-2. The synthesized RS-2 showed excellent thermal stability, so the weight loss was about 30% at 800 °C. RS-2 was applied as a new coating in the solid-phase microextraction procedure to extract chlorpyrifos and fenthion pesticides from water, wastewater, and fruit samples, before determining by corona discharge-ion mobility spectrometry. Some experimental factors affecting the extraction yield of the analytes, including ionic strength, stirring rate, sample pH, extraction temperature, and extraction time, were investigated. Under optimum conditions, the linear dynamic ranges were 0.1-10 μg L^-1 and 1.0-70 μg L^-1, and the limits of detection were 0.05 and 0.55 μg L^-1 for chlorpyrifos and fenthion, respectively. The proposed method showed recovery values in the range 86-117% with a precision of 3.0-7.1% for real samples. Covalent triazine-based framework (CTF)-grafted phenyl-functionalized fibrous silica nanosphere (named as RS-2) was synthesized. RS-2 was applied as a sorbent for solid-phase microextraction (SPME) of chlorpyrifos and fenthion from fruit and water samples followed by corona discharge ionization ion mobility spectrometry (CD-IMS).

Recent Advances of Solid-State NMR Spectroscopy for Microporous Materials

Microporous materials have attracted a rapid growth of research interest in materials science and the multidisciplinary area because of their wide applications in catalysis, separation, ion exchange, gas storage, drug release, and sensing. A fundamental understanding of their diverse structures and properties is crucial for rational design of high-performance materials and technological applications in industry. Solid-state NMR (SSNMR), capable of providing atomic-level information on both structure and dynamics, is a powerful tool in the scientific exploration of solid materials. Here, advanced SSNMR instruments and methods for characterization of microporous materials are briefly described. The recent progress of the application of SSNMR for the investigation of microporous materials including zeolites, metal-organic frameworks, covalent organic frameworks, porous aromatic frameworks, and layered materials is discussed with representative work. The versatile SSNMR techniques provide detailed information on the local structure, dynamics, and chemical processes in the confined space of porous materials. The challenges and prospects in SSNMR study of microporous and related materials are discussed.

Porous Aromatic Frameworks (PAFs)

Porous aromatic frameworks (PAFs) represent an important category of porous solids. PAFs possess rigid frameworks and exceptionally high surface areas, and, uniquely, they are constructed from carbon-carbon-bond-linked aromatic-based building units. Various functionalities can either originate from the intrinsic chemistry of their building units or are achieved by postmodification of the aromatic motifs using established reactions. Specially, the strong carbon-carbon bonding renders PAFs stable under harsh chemical treatments. Therefore, PAFs exhibit specificity in their chemistry and functionalities compared with conventional porous materials such as zeolites and metal organic frameworks. The unique features of PAFs render them being tolerant of severe environments and readily functionalized by harsh chemical treatments. The research field of PAFs has experienced rapid expansion over the past decade, and it is necessary to provide a comprehensive guide to the essential development of the field at this stage. Regarding research into PAFs, the synthesis, functionalization, and applications are the three most important topics. In this thematic review, the three topics are comprehensively explained and aptly exemplified to shed light on developments in the field. Current questions and a perspective outlook will be summarized.

Alkoxy- and Silanol-Functionalized Cage-Type Oligosiloxanes as Molecular Building Blocks to Construct Nanoporous Materials

Siloxane-based materials have a wide range of applications. Cage-type oligosiloxanes have attracted significant attention as molecular building blocks to construct novel siloxane-based nanoporous materials with promising applications such as in catalysis and adsorption. This paper reviews recent progress in the preparation of siloxane-based nanoporous materials using alkoxy- and silanol-functionalized cage siloxanes. The arrangement of cage siloxanes units is controlled by various methods, including amphiphilic self-assembly, hydrogen bonding of silanol groups, and regioselective functionalization, toward the preparation of ordered nanoporous siloxane-based materials.

Synthesis of Polycyclic and Cage Siloxanes by Hydrolysis and Intramolecular Condensation of Alkoxysilylated Cyclosiloxanes

The controlled synthesis of oligosiloxanes with well-defined structures is important for the bottom-up design of siloxane-based nanomaterials. This work reports the synthesis of various polycyclic and cage siloxanes by the hydrolysis and intramolecular condensation of monocyclic tetra- and hexasiloxanes functionalized with various alkoxysilyl groups. An investigation of monoalkoxysilylated cyclosiloxanes revealed that intramolecular condensation occurred preferentially between adjacent alkoxysilyl groups to form new tetrasiloxane rings. The study of dialkoxy- and trialkoxysilylated cyclotetrasiloxanes revealed multistep intramolecular condensation reactions to form cubic octasiloxanes in relatively high yields. Unlike conventional methods starting from organosilane monomers, intramolecular condensation enables the introduction of different organic substituents in controlled arrangements. So-called Janus cubes have been successfully obtained, that is, Ph₄ R₄ Si₈ O₁₂ , in which R=Me, OSiMe₃ , and OSiMe₂ Vi (Vi=vinyl). These findings will enable the creation of siloxane-based materials with diverse functions.

Toxic organic solvent adsorption by a hydrophobic covalent polymer

A hydrophobic needle-shaped novel covalent polymer has been synthesized at ambient temperature for adsorption of toxic organics.

Porous Organic Frameworks: Advanced Materials in Analytical Chemistry

Porous organic frameworks (POFs), a general term for covalent-organic frameworks (COFs), covalent triazine frameworks (CTFs), porous aromatic frameworks (PAFs), etc., are constructed from organic building monomers with strong covalent bonds and have generated great interest among researchers. The remarkable features, such as large surface areas, permanent porosity, high thermal and chemical stability, and convenient functionalization, promote the great potential of POFs in diverse applications. A critical overview of the important development in the design and synthesis of COFs, CTFs, and PAFs is provided and their state-of-the-art applications in analytical chemistry are discussed. POFs and their functional composites have been explored as advanced materials in "turn-off" or "turn-on" fluorescence detection and novel stationary phases for chromatographic separation, as well as a promising adsorbent for sample preparation methods. In addition, the prospects for the synthesis and utilization of POFs in analytical chemistry are also presented. These prospects can offer an outlook and reference for further study of the applications of POFs.

MnAPO-5 as an efficient heterogeneous catalyst for selective liquid phase partial oxidation reactions

Heterogeneous catalysts play a key role in addressing the economic and environmental issues of the chemical industry due to their several advantages, like ease of product separation, work-up and high recycling efficiency. Herein, we report the synthesis of a robust manganese(iv)-containing aluminophosphate material (MnAPO-5), with an AFI framework topology. This material has been characterized thoroughly by powder XRD, XPS, UHR TEM, FE SEM, ³¹P CP MAS NMR, atomic absorption spectroscopy, UV-visible spectroscopy and TGA. The Mn-containing microporous material has been employed as a heterogeneous catalyst for the oxidation of styrene and the synthesis of adipic acid from cyclohexanone in the presence of tert-butyl hydroperoxide (TBHP) as the oxidant in air and it displayed very high recycling efficiency.

Tunable Gravimetric and Volumetric Hydrogen Storage Capacities in Polyhedral Oligomeric Silsesquioxane Frameworks

We study the hydrogen adsorption in porous frameworks composed of silsesquioxane cages linked via boron substituted aromatic structures by first-principles modeling. Such polyhedral oligomeric silsesquioxane (POSS) frameworks can be further modified by decorating them with metal atoms binding to the ring structures of the linkers. We have considered Sc- and Ti-doped frameworks which bind H2 via so-called Kubas interaction between hydrogen molecules and transition metal atoms. It will be demonstrated that the maximum H2 gravimetric capacity can be improved to more than 7.5 wt % by using longer linkers with more ring structures. However, the maximum H2 volumetric capacity can be tuned to more than 70 g/L by varying the size of silsesquioxane cages. We are optimistic that by varying the building blocks, POSS frameworks can be modified to meet the targets for the gravimetric and volumetric capacities set by the U.S. Department of Energy.

Amine post-functionalized POSS-based porous polymers exhibiting simultaneously enhanced porosity and carbon dioxide adsorption properties

We provide a possibility for post-synthetic amine functionalization of porous polymers exhibiting enhanced CO₂ capacity and selectivity without compromising the porosity.

Miniaturized catalysis: monolithic, highly porous, large surface area capillary flow reactors constructed in situ from polyhedral oligomeric silsesquioxanes (POSS)

A single-step molding process utilizing free-radical cross-linking reaction of vinyl POSS in microliter-sized dimensions leads to hierarchically-structured, mechanically robust, porous hybrid structures. Functional variants show excellent performance in Suzuki-type coupling reactions. Due to their small volume, long-term operational robustness, and potential chemical diversity, these materials are promising candidates for catalyst screening applications.

A novel pH-responsive POSS-based nanoporous luminescent material derived from brominated distyrylpyridine and octavinylsilsesquioxane

A novel porous material is prepared by octavinylsilsesquioxane and brominated distyrylpyridine via the Heck coupling reaction, which exhibits an excellent pH-responsive property in the pH range from 1 to 4.

Hybrid nanoporous polystyrene derived from cubic octavinylsilsesquioxane and commercial polystyrene via the Friedel–Crafts reaction

A series of POSS-based nanoporous materials were prepared from commercial polystyrene and octavinylsilsesquioxane via the Friede–Crafts reaction.

Benzene absorption in a protuberant-grid-type zinc(ii)–organic framework triggered by the migration of guest water molecules

Benzene molecules are reported to be easily and regularly absorbed into specific channels in a 2D protuberant-grid-type Zn(ii)–organic framework, which consists of racemic interdigitated bilayers.

Octavinylsilsesquioxane-based luminescent nanoporous inorganic–organic hybrid polymers constructed by the Heck coupling reaction

A class of luminescent nanoporous inorganic–organic hybrid polymers has been synthesized by the Heck coupling of octavinylsilsesquioxane with aromatic bromide monomers. The resulting materials exhibit porous and luminescent features, and show picric acid sensing behaviour.

Constructing hybrid porous polymers from cubic octavinylsilsequioxane and planar halogenated benzene

Hybrid porous polymers derived from cubic octavinylsilsequioxane and planar halogenated benzene monomers exhibit high thermal stability, tunable porosities and potential applications in carbon dioxide storage.

Targeted synthesis of electroactive porous organic frameworks containing triphenyl phosphine moieties

A novel electroactive porous aromatic framework (JUC-Z4-Cl) was designed and synthesized via Yamamoto-type Ullmann cross-coupling reaction with the monomer tris(4-chlorophenyl)phosphine. By simple redox chemical reactions, stable, reductive, porous polytri(p-phenyl)phosphine (JUC-Z4) and polytri(p-phenyl)phosphine oxide (JUC-Z5) could be obtained as off-white powders. The structures of JUC-Z4 and JUC-Z5 were confirmed using magic-angle spinning nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, etc. The microporous architectures exhibit high stability (471°C for JUC-Z4 and 484°C for JUC-Z5) and large surface area (793 and 648 m² g⁻¹ for JUC-Z4 and JUC-Z5, respectively). JUC-Z4 also exhibits efficient recognition ability of greenhouse gases from dry air.

Conceptual design of large surface area porous polymeric hybrid media based on polyhedral oligomeric silsesquioxane precursors: preparation, tailoring of porous properties, and internal surface functionalization

We report on the preparation of hybrid, organic-inorganic porous materials derived from polyhedral oligomeric vinylsilsesquioxanes (vinylPOSS) via a single-step molding process. The monolithic, large surface area materials are studied with a particular focus on morphology and porous properties. Radical vinyl polymerization of the nanometer-sized POSS building blocks is therefore utilized via a thermally initiated route and in porogenic diluents such as tetrahydrofuran and polyethylene glycols of varying composition. Careful choice of these porogenic solvents and proper choice of initiator concentration lead to highly porous monolithic building entities which show a rigid, 3D-adhered, porous structure, macroscopically adapting the shape of a given mold. The described materials reflect Brunauer-Emmett-Teller (BET) surface areas of 700 m2/g or more and maximum tunable mesopore volumes of up to 2 cm3/g. Experimental investigations demonstrate the option to tailor nanoporosity and macroporosity in the single-step free-radical polymerization process. While studies on the influence of the used porogenic solvents reveal tuneability of pore sizes due to the unique pore formation process, tailored existence of residual vinyl groups allows facile postpolymerization modification of the highly porous, large surface area hybrid materials exploited via thiol-ene "click" chemistry. Our developed, simply realizable preparation process explores a new route to derive porous organic-inorganic hybrid adsorbents for a wide variety of applications such as extraction, separation science, and catalysis.