Synthesis and biological properties of novel glucose-based fluoro segmented macromolecular architectures

The emergence of novel well-defined biological macromolecular architectures containing fluorine moieties displaying superior functionalities can satisfactorily address many biomedical challenges. In this research, ABA- and AB-type glucose-based biological macromolecules were synthesized using acryl-2,3,4,6-tetra-O-acetyl-D-glucopyranoside with pentafluorophenyl (FPM), pentafluorobenzyl (FBM), phenyl (PM) and benzyl (BM) methacrylate-based macro-RAFT agents following RAFT polymerization. The macro-RAFT agents and the corresponding copolymers were characterized by 19F, 1H, and 13C NMR and FTIR spectroscopic techniques to understand the chemical structure, molecular weight by size-exclusion chromatography, thermal analysis by TGA and DSC. Thermal stability (Td5%) of the FPM and FBM fluoro-based polymers was observed in the range of 219-267 °C, while the non-fluoro PM and BM polymers exhibited in the range of 216-264 °C. Among the macro-RAFT agents, PFPM (107 °C, ΔH: 0.613 J/g) and PPM (103 °C, ΔH: 0.455 J/g) showed higher Tm values, while among the block copolymers, PFBM-b-PG (123 °C, ΔH: 0.412 J/g) and PG-b-PFPM-b-PG (126 °C, ΔH: 0.525 J/g) exhibited higher Tm values. PFBMT and PPM macro-RAFT agents, PPM-b-PG and PG-b-PPM-b-PG copolymer spin-coated films showed the highest hydrophobicity (120°) among the synthesized polymers. The block copolymers exhibited self-assembled segregation by using relatively hydrophobic segments as the core and hydrophilic moieties as the corona. Synthesized biological macromolecules exhibit maximum antibacterial activity towards S. aureus than E. coli bacteria. Fluorophenyl (PFPM) and non-fluorobenzyl-based (PBMT) macro-RAFT agents exhibit low IC50 values, suggesting high cytotoxicity. All the triblock copolymers exhibit lesser cytotoxicity than the di-block polymers.

Water-soluble PEG segmented mannose-based macromolecules: Synthesis and their biocompatibility

The macromolecular architectures, namely mannose-based methacrylate acetyl-mannopyranoside and PEG block copolymers (AB type copolymer [PEG-b-PMAM], poly(ethyleneglycol)-b-poly(methacryl-2,3,4,6-tetra-O-acetyl-D-mannopyranoside and ABA type copolymer [PMAM-b-PEG-b-PMAM], poly(methacryl-2,3,4,6-tetra-O-acetyl-D-mannopyranoside-b-poly(ethyleneglycol)-b-poly(methacryl-2,3,4,6-tetra-O-acetyl-D-mannopyranoside) were synthesized by atom transfer radical polymerization (ATRP) method that were deacetylated to generate the corresponding water-soluble and biocompatible glycopolymer macromolecules. The molecular weight of acetyl and deacetylate macromolecules was in the range of 7083-9499 and 4659-6026, as determined by GPC and proton NMR spectra. The 5 % decomposition temperatures for acetylated methacrylate macromolecules (218-299 °C) were higher than the corresponding water-soluble macromolecules (204-248 °C). The conjugation of poly(methacryl-2,3,4,6-tetra-O-acetyl-D-mannopyranoside (PMAM) segment with the PEG block decreased the glass transition (Tg) value, and the water-soluble macromolecules displayed Tg in the range of 92-95 °C. The biocompatibility of the synthesized water-soluble mannose-based macromolecules was determined using Human Bone Derived Cells (HBDC) culture with the TCP (Tissue culture plastic) template as control. Using three different concentrations of the synthesized glycopolymers, HBDC's were cultured for 1, 3, and 7 days. The effect of mannomethacrylate macromolecules on mitochondrial activity of HBDC's was estimated using colorimetry that showed the conversion of MTS [3-(4,5-dimethyl-thiazol-2-yl)-2,5-diphenyl-tetrazolium-bromide] to formazan (MTS assay). ABA type diblock copolymer architecture exhibited increased absorbance values of 3 and 7 day cultures at 1-100 M concentrations, with the highest values observed at a concentration of 1 M for day 3 cultures. The design of these novel mannose-based macromolecules is important for improving cell proliferation, cell adhesion, and osteointegration efficiency.

Recycling protein selective adsorption on fluorine-modified surface through fluorine-fluorine interaction

Low surface energy materials with micro-nano structures have been widely developed to prevent non-specific adhesion of biomolecules. Herein we put forward a new approach based on the antifouling and self-assembly properties of fluorine components, to construct a non-specific protein resistance surface with selective protein adsorption property. Briefly, the antifouling surface (SN-F) was obtained by a simple one-step modification on silicon nanowire arrays (SiNWAs) with fluorine coupling agent 1 H,1 H,2 H,2 H-perfluorodecyltrimethoxysilane (FAS). And protein was fluorinated by conjugation with an amphiphilic fluoro-copolymer, produced from 2-methacrylamido glucopyranose (MAG) and trifluoroethyl methacrylate (TFEMA) via RAFT polymerization. The properties of the materials were characterized by ¹H nuclear magnetic resonance (¹H NMR), infrared spectroscopy (FTIR), water contact angle, and X-ray photoelectron spectroscopy (XPS) etc., and protein adsorption was investigated by protein content measurement, fluorescence detection, and electrophoresis. It was observed that the adsorption for native proteins on SN-F was at an extremely low level, while the adsorption for the fluoro-copolymer conjugated protein (PFG-BSA) was significantly increased. When the percentage of TFEMA in the fluoro-copolymer was as high as 52.0%, the fluorinated protein adsorbed on SN-F was more than 35 times of native proteins on the surface. Moreover, the platform could resist IgG adhesion in serum after the adsorption of fluorinated protein, and it could be recycled three times after 75% ethanol treatment. In conclusion, SN-F showed non-specific protein resistance through low surface energy and specific protein adsorption by fluorine-fluorine self-assembly. The fluorinated nanostructured platform has a great potential in controlling protein adsorption and release.

Tailor-made Glycopolymers via Reversible Deactivation Radical Polymerization: Design, Properties and Applications

Investigating the underlying mechanism of biological interactions using glycopolymer is becoming increasingly important owing to their unique recognition properties. The multivalent interactions between lectin and glycopolymer are significantly influenced by...

Construction of Antibacterial Adhesion Surfaces Based on Bioinspired Borneol-Containing Glycopolymers

Preparation of antibacterial coating materials is considered an effective strategy to prevent medical device-related infections. In the present study, by combining 2-lactobionamidoethyl methacrylamide with a unique structure borneol compound, new...

Toward Glycomaterials with Selectivity as Well as Affinity

Multivalent glycosylated materials (polymers, surfaces, and particles) often show high affinity toward carbohydrate binding proteins (e.g., lectins) due to the nonlinear enhancement from the cluster glycoside effect. This affinity gain has potential in applications from diagnostics, biosensors, and targeted delivery to anti-infectives and in an understanding of basic glycobiology. This perspective highlights the question of selectivity, which is less often addressed due to the reductionist nature of glycomaterials and the promiscuity of many lectins. The use of macromolecular features, including architecture, heterogeneous ligand display, and the installation of non-natural glycans, to address this challenge is discussed, and examples of selectivity gains are given.

Tobramycin-loaded complexes to prevent and disrupt Pseudomonas aeruginosa biofilms

Carbohydrate-based materials are increasingly investigated for a range of applications spanning from healthcare to advanced functional materials. Synthetic glycopolymers are particularly attractive as they possess low toxicity and immunogenicity and can be used as multivalent ligands to target sugar-binding proteins (lectins). Here, we utilised RAFT polymerisation to synthesize two families of novel diblock copolymers consisting of a glycopolymers block containing either mannopyranose or galactopyranose pendant units, which was elongated with sodium 2-acrylamido-2-methyl-1-propanesulfonate (AMPS) to generate a polyanionic block. The latter enabled complexation of cationic aminoglycoside antibiotic tobramycin through electrostatic interactions (loading efficiency in the 0.5-6.3 wt% range, depending on the copolymer). The resulting drug vectors were characterized by dynamic light scattering, zeta-potential, and transmission electron microscopy. Tobramycin-loaded complexes were tested for their ability to prevent clustering or disrupt biofilm of the Pseudomonas aeruginosa Gram-negative bacterium responsible for a large proportion of nosocomial infection, especially in immunocompromised patients. P. aeruginosa possesses two specific tetrameric carbohydrate-binding adhesins, LecA (PA-IL, galactose/N-acetyl-D-galactosamine-binding) and LecB (PA-IIL, fucose/mannose-binding), and the cell-associated and extracellular adhesin CdrA (Psl/mannose-binding) thus ideally suited for targeted drug delivery using sugar-decorated tobramycin-loaded complexes here developed. Both aliphatic and aromatic linkers were utilised to link the sugar pendant units to the polyacrylamide polymer backbone to assess the effect of the nature of such linkers on bactericidal/bacteriostatic properties of the complexes. Results showed that tobramycin-loaded complexes efficiently suppressed (40 to 60% of inhibition) in vitro biofilm formation in PAO1-L P. aeruginosa and that preferential targeting of PAO1-L biofilm can be achieved using mannosylated glycopolymer-b-AMPS_m.

Application of carbohydrates in approved small molecule drugs: A review

Carbohydrates are an important energy source and play numerous key roles in all living organisms. Carbohydrates chemistry involved in diagnosis and treatment of diseases has been attracting increasing attention. Carbohydrates could be one of the major focuses of new drug discovery. Currently, however, carbohydrate-containing drugs account for only a small percentage of all drugs in clinical use, which does not match the important roles of carbohydrates in the organism. In other words, carbohydrates are a relatively untapped source of new drugs and therefore may offer exciting novel therapeutic opportunities. Here, we presented an overview of the application of carbohydrates in approved small molecule drugs and emphasized and evaluated the roles of carbohydrates in those drugs. The potential development direction of carbohydrate-containing drugs was presented after summarizing the advantages and challenges of carbohydrates in the development of new drugs.

Self-Assembled Multi- and Single-Chain Glyconanoparticles and Their Lectin Recognition

In this work, we describe the physicochemical characterization of amphiphilic glycopolymers synthesized via copper(0)-mediated reversible-deactivation radical polymerization (Cu-RDRP). Depending on the chemical composition of the polymer, these glycopolymers are able to form multi-chain or single-chain polymeric nanoparticles. The folding of these polymers is first of all driven by the amphiphilicity of the glycopolymers and furthermore by the supramolecular formation of helical supramolecular stacks of benzene-1,3,5-tricarboxamides (BTAs) stabilized by threefold hydrogen bonding. The obtained polymeric nanoparticles were subsequently evaluated for their lectin-binding affinity toward a series of mannose- and galactose-binding lectins via surface plasmon resonance. We found that addition of 2-ethylhexyl acrylate to the polymer composition results in compact particles, which translates to a reduction in binding affinity, whereas with the addition of BTAs, the relation between the nature of the particle and the binding ability system becomes more unpredictable.

Aqueous RAFT Synthesis of Low Molecular Weight Anionic Polymers for Determination of Structure/Binding Interactions with Gliadin

Gliadin, a component of gluten and a known epitope, is implicated in celiac disease (CeD) and results in an inflammatory response in CeD patients when consumed. Acrylamide-based polyelectrolytes are employed as models to determine the effect of molecular weight and pendent group on non-covalent interaction modes with gliadin in vitro. Poly(sodium 2-acrylamido-2-methylpropane sulfonate) and poly(sodium 3-methylpropyl-3-butanoate) are synthesized via aqueous reversible addition fragmentation chain transfer (aRAFT) polymerization and characterized by gel permeation chromatography-multiangle laser light scattering. The polymer/gliadin blends are examined via circular dichroism, zeta potential measurements, 8-anilinonaphthalene-1-sulfonic acid fluorescence spectroscopy, and dynamic light scattering. Acrylamide polymers containing strong anionic pendent groups have a profound effect on gliadin secondary structure and solution behavior below the isoelectric point, while polymers containing hydrophobic character only have a minor impact. The polymers have little effect on gliadin secondary structure and solution behavior at the isoelectric point.

Fluorescent glycoconjugates and their applications

Fluorescent glycoconjugates are discussed for their applications in biology in vitro, in cell assays and in animal models. Advantages and limitations are presented for each design using a fluorescent core conjugated with glycosides, or vice versa.

Carbohydrate-based nanocarriers and their application to target macrophages and deliver antimicrobial agents

Many deadly infections are produced by microorganisms capable of sustained survival in macrophages. This reduces exposure to chemadrotherapy, prevents immune detection, and is akin to criminals hiding in police stations. Therefore, the use of glyco-nanoparticles (GNPs) as carriers of therapeutic agents is a burgeoning field. Such an approach can enhance the penetration of drugs into macrophages with specific carbohydrate targeting molecules on the nanocarrier to interact with macrophage lectins. Carbohydrates are natural biological molecules and the key constituents in a large variety of biological events such as cellular communication, infection, inflammation, enzyme trafficking, cellular migration, cancer metastasis and immune functions. The prominent characteristics of carbohydrates including biodegradability, biocompatibility, hydrophilicity and the highly specific interaction of targeting cell-surface receptors support their potential application to drug delivery systems (DDS). This review presents the 21^st century development of carbohydrate-based nanocarriers for drug targeting of therapeutic agents for diseases localized in macrophages. The significance of natural carbohydrate-derived nanoparticles (GNPs) as anti-microbial drug carriers is highlighted in several areas of treatment including tuberculosis, salmonellosis, leishmaniasis, candidiasis, and HIV/AIDS.

Functional Glyco-Nanogels for Multivalent Interaction with Lectins

Interactions between glycans and proteins have tremendous impact in biomolecular interactions. They are important for cell–cell interactions, proliferation and much more. Here, we emphasize the glycan-mediated interactions between pathogens and host cells. Pseudomonas aeruginosa, responsible for a huge number of nosocomial infections, is especially the focus when it comes to glycan-derivatives as pathoblockers. We present a microwave assisted protecting group free synthesis of glycomonomers based on lactose, melibiose and fucose. The monomers were polymerized in a precipitation polymerization in the presence of NiPAm to form crosslinked glyco-nanogels. The influence of reaction parameters like crosslinker type or stabilizer amount was investigated. The gels were characterized in lectin binding studies using model lectins and showed size and composition-dependent inhibition of lectin binding. Due to multivalent presentation of glycans in the gel, the inhibition was clearly stronger than with unmodified saccharides, which was compared after determination of the glycan loading. First studies with Pseudomonas aeruginosa revealed a surprising influence on the secretion of virulence factors. Functional glycogels may be in the future potent alternatives or adjuvants for antibiotic treatment of infections based on glycan interactions between host and pathogen.

Fluorinated Glycopolymers as Reduction-responsive 19F MRI Agents for Targeted Imaging of Cancer

Imaging agents that can be targeted to specific diseases and respond to the microenvironment of the diseased tissue are of considerable interest due to their potential in diagnosing and managing diseases. Here we report a new class of branched fluorinated glycopolymers as ¹⁹F MRI contrast agents that respond to a reductive environment, for targeted imaging of cancer. The fluorinated glycopolymers can be readily prepared by a one-pot RAFT polymerization of glucose- and fluorine-containing monomers in the presence of a disulfide-containing cross-linking monomer. The incorporation of glucose units along the polymer chain enables these fluorinated glycopolymers to effectively target cancer cells due to interactions with the overexpressed sugar transporters present on the cell surface. In addition, the polymers exhibit an enhanced ¹⁹F MRI signal in response to a reductive environment, one of the unique hallmarks of many cancer cells, demonstrating their potential as promising candidates for targeted imaging of cancer.

Using Self-Assembling Peptides to Integrate Biomolecules into Functional Supramolecular Biomaterials

Throughout nature, self-assembly gives rise to functional supramolecular biomaterials that can perform complex tasks with extraordinary efficiency and specificity. Inspired by these examples, self-assembly is increasingly used to fabricate synthetic supramolecular biomaterials for diverse applications in biomedicine and biotechnology. Peptides are particularly attractive as building blocks for these materials because they are based on naturally derived amino acids that are biocompatible and biodegradable; they can be synthesized using scalable and cost-effective methods, and their sequence can be tailored to encode formation of diverse architectures. To endow synthetic supramolecular biomaterials with functional capabilities, it is now commonplace to conjugate self-assembling building blocks to molecules having a desired functional property, such as selective recognition of a cell surface receptor or soluble protein, antigenicity, or enzymatic activity. This review surveys recent advances in using self-assembling peptides as handles to incorporate biologically active molecules into supramolecular biomaterials. Particular emphasis is placed on examples of functional nanofibers, nanovesicles, and other nano-scale structures that are fabricated by linking self-assembling peptides to proteins and carbohydrates. Collectively, this review highlights the enormous potential of these approaches to create supramolecular biomaterials with sophisticated functional capabilities that can be finely tuned to meet the needs of downstream applications.

Preparation of Functional Monomers as Precursors of Bioprobes from a Common Styrene Derivative and Polymer Synthesis

CM-Str (4-(Chloromethyl)styrene) was used as a useful starting material for the construction of a series of functional monomers. Substitution of the chlorine to the corresponding azide was performed, and the reduction of the azide proceeded smoothly to afford an aminostyrene, which was used as a common precursor for the preparation of functional monomers. Condensation of the amine with a fluorophore, biotin and carbohydrate was accomplished. Among the monomers, a carbohydrate monomer was polymerized with or without acrylamide as a model polymerization to yield the corresponding water-soluble glycopolymers, and biological evaluations of the glycopolymers for a lectin, and wheat germ agglutinin (WGA), were carried out on the basis of the fluorescence change of tryptophan in the WGA.

Hyperbranched Glycopolymers of 2-(α-d-Mannopyranose) Ethyl Methacrylate and N,N'-Methylenebisacrylamide: Synthesis, Characterization and Multivalent Recognitions with Concanavalin A

A series of novel hyperbranched poly[2-(α-d-mannopyranosyloxy) ethyl methacrylate-co-N,N'-methylenebisacrylamide] (HPManEMA-co-MBA) are synthesized via a reversible addition fragmentation polymerization (RAFT). The dosage ratios of linear and branch units are tuned to obtain different degree of branching (DB) in hyperbranched glycopolymers. The DB values are calculated according to the content of nitrogen, which are facilely determined by elemental analysis. The lectin-binding properties of HPManEMA-co-MBA to concanavalin A (ConA) are examined using a turbidimetric assay. The influence of defined DB value and molecular weight of HPManEMA-co-MBA on the clustering rate is studied. Notably, HPManEMA-co-MBAs display a low cytotoxicity in the MTT assay, thus are potential candidates for biomedical applications.

A Green and Sustainable Route to Carbohydrate Vinyl Ethers for Accessing Bioinspired Materials with a Unique Microspherical Morphology

Synthesizing chemicals and materials from renewable sources is one of the main aims of modern science. Carbohydrates represent excellent renewable natural raw materials that are ecofriendly, inexpensive, and biologically compatible. A green procedure has been developed for the vinylation of carbohydrates by using readily available calcium carbide. Various carbohydrates were utilized as starting materials, resulting in mono-, di-, and tetravinyl ethers in high to excellent yields (81-92 %). The synthesized biobased vinyl ethers were utilized as monomers in free radical and cationic polymerizations. A unique combination of a smooth surface and intrinsic microcompartments was achieved in the synthesized materials. Two types of biobased materials were prepared involving microspheres and intrinsic hollow compartments in polymers. Scanning electron microscopy with built-in ion beam cutting was applied to reveal the spatial hierarchical structures in 3D space.

PEGylation potentiates hepatoma cell targeted liposome-mediated in vitro gene delivery via the asialoglycoprotein receptor

Hepatocellular carcinoma is a burgeoning health issue in sub-Saharan Africa and East Asia where it is most prevalent. The search for gene medicine treatment modalities for this condition represents a novel departure from current treatment options and is gaining momentum. Here we report on nonPEGylated and on sterically stabilized PEGylated cationic liposomes decorated with D-galacto moieties linked to 24.1 Å spacers for asialoglycoprotein receptor (ASGP-R)-targeted vehiculation of pCMV-luc plasmid DNA. Cargo DNA is fully liposome associated at N/P ratio=3:1 and is partially protected from the effects of serum nucleases. Moreover, at this ratio, lipoplex dimensions (89-97 nm) are compatible with the requirements for extravasation in vivo. Ethidium displacement assays show that the reporter DNA is in a less condensed state when bound to PEGylated liposomes than with nonPEGylated liposomes. PEGylated lipoplexes were well tolerated by both HEK293 (ASGP-R-negative) and HepG2 (ASGP-R-positive) cell lines and delivered DNA to the human hepatoma cell line HepG2 by ASGP-R mediation at levels three-fold greater than nonPEGylated lipoplexes. PEGylated ASGP-R-targeted liposomes reported in this study possess the required characteristics for hepatotropic gene delivery and may be considered for further application in vivo.

Poly(acryloyl hydrazide), a versatile scaffold for the preparation of functional polymers: synthesis and post-polymerisation modification

Here we present the synthesis of poly(acryloyl hydrazide), a versatile scaffold for the preparation of functional polymers, and its post-polymerisation modification using a wide range of conditions.

Here we present the synthesis and post-polymerisation modification of poly(acryloyl hydrazide), a versatile scaffold for the preparation of functional polymers: poly(acryloyl hydrazide) was prepared from commercially available starting materials in a three step synthesis on a large scale, in good yields and high purity. Our synthetic approach included the synthesis of a Boc-protected acryloyl hydrazide, the preparation of polymers via RAFT polymerisation and the deprotection of the corresponding Boc-protected poly(acryloyl hydrazide). Post-polymerisation modification of poly(acryloyl hydrazide) was then demonstrated using a range of conditions for both hydrophilic and hydrophobic aldehydes. These experiments demonstrate the potential of poly(acryloyl hydrazide) as a scaffold in the synthesis of functional polymers, in particular those applications where in situ screening of the activity of the functionalised polymers may be required (e.g. biological applications).

Peptide valency plays an important role in the activity of a synthetic fibrin-crosslinking polymer

Therapeutic polymers have the potential to improve the standard of care for hemorrhage, or uncontrolled bleeding, as synthetic hemostats. PolySTAT, a fibrin-crosslinking peptide-polymer conjugate, has the capacity to rescue fibrin clot formation and improve survival in a model of acute traumatic bleeding. PolySTAT consists of a synthetic polymer backbone to which targeting fibrin-binding peptides are linked. For translation of PolySTAT, the optimal valency of peptides must be determined. Grafting of fibrin-binding peptides to the poly(hydroxyethyl methacrylate)-based backbone was controlled to produce peptide valencies ranging from 0 to 10 peptides per polymer. PolySTATs with valencies of ≈4 or greater resulted in increased clot firmness, kinetics, and decreased breakdown as measured by thromboelastometry. A valency of ≈4 increased clot firmness 57% and decreased clot breakdown 69% compared to phosphate-buffered saline. This trend was characterized by neutron scattering, which probed the structure of clots formed in the presence of PolySTAT. Finally, PolySTAT with valencies of 4 (100% survival; p = 0.013) and 8 (80% survival; p = 0.063) improved survival compared to an albumin control in a femoral artery injury model (20% survival). This work demonstrates tunability of hemostatic polymers and the ability of in vitro assays to predict in vivo efficacy.

"Bitter-Sweet" Polymeric Micelles Formed by Block Copolymers from Glucosamine and Cholic Acid

Natural compounds glucosamine and cholic acid have been used to make acrylic monomers which are subsequently used to prepare amphiphilic block copolymers by reversible addition-fragmentation chain transfer (RAFT) polymerization. Despite the striking difference in polarity and solubility, three diblock copolymers consisting of glucosamine and cholic acid pendants with different hydrophilic and hydrophobic chain lengths have been synthesized without the use of protecting groups. They are shown to self-assemble into polymeric micelles with a "bitter" bile acid core and "sweet" sugar shell in aqueous solutions, as evidenced by dynamic light scattering and transmission electron microscopy. The critical micelle concentration varies with the hydrophobic/hydrophilic ratio, ranging from 0.62 to 1.31 mg/L. Longer chains of polymers induced the formation of larger micelles in range of 50-70 nm. These micelles can solubilize hydrophobic compounds such as Nile Red in aqueous solutions. Their loading capacity mainly depends upon the hydrophobic/hydrophilic ratio of the polymers, and may be also related to the length of the hydrophilic block. These polymeric micelles allowed for a 10-fold increase in the aqueous solubility of paclitaxel and showed no cytotoxicity below the concentration of 500 mg/L. Such properties make these polymeric micelles interesting reservoirs for hydrophobic molecules and drugs for biomedical applications.

Synthetic Assembly of Mannose Moieties Using Polymer Chemistry and the Biological Evaluation of Its Interaction towards Concanavalin A

Protein-carbohydrate interactions exhibit myriad intracellular recognition events, so understanding and investigating their specific interaction with high selectivity and strength are of crucial importance. In order to examine the effect of multivalent binding on the specificity of protein-carbohydrate interactions, we synthesized mannose glycosides as a novel type of glycosylated monomer and glycopolymers of polyacrylamide derivatives with α-mannose (α-Man) by radical polymerization and monitored their strength of interaction with concanavalin A (Con A) by surface plasmon resonance (SPR) detection. In a quantitative test using the Con A-immobilized sensor surface, the kinetic affinity for the synthesized polymers, 8a (KD = 3.3 × 10-6 M) and 8b (KD = 5.3 × 10-5 M), were concentration-dependent, showing strong, specific molecular recognition abilities with lectin. Our study showed the enhancement in recognition specificity for multivalent saccharides, which is often mediated by cell surface carbohydrate-binding proteins that exhibit weak affinity and broad specificity for the individual ligands.

Targeting cells of the immune system: mannosylated HPMA–LMA block-copolymer micelles for targeting of dendritic cells

Background: Successful tumor immunotherapy depends on the induction of strong and sustained tumor antigen-specific immune responses by activated antigen-presenting cells (APCs) such as dendritic cells (DCs). Since nanoparticles have the potential to codeliver tumor-specific antigen and DC-stimulating adjuvant in a DC-targeting manner, we wanted to assess the suitability of mannosylated HPMA-LMA block polymers for immunotherapy. Materials & methods: Fluorescence-labeled block copolymer micelles derived from P(HPMA)-block-P(LMA) copolymers and according statistical copolymers were synthesized via RAFT polymerization, and loaded with the APC activator L18-MDP. Both types of copolymers were conjugated with D-mannose to target the mannose receptor as expressed by DCs and macrophages. The extent and specificity of micelle binding and activation of APCs was monitored using mouse spleen cells and bone marrow-derived DC (BMDC). Results: Nontargeting HPMA-LMA statistical copolymers showed strong unspecific cell binding. HPMA-LMA block copolymers bound DC only when conjugated with mannose, and in a mannose receptor-specific manner. Mannosylated HPMA-LMA block copolymers were internalized by DC. DC-targeting HPMA-LMA block copolymers mediated DC activation when loaded with L18-MDP. Conclusion: Mannosylated HPMA-LMA block copolymers are a promising candidate for the delvopment of DC-targeting nanovaccines.

Recyclable Escherichia coli-Specific-Killing AuNP-Polymer (ESKAP) Nanocomposites

Escherichia coli plays a crucial role in various inflammatory diseases and infections that pose significant threats to both human health and the global environment. Specifically inhibiting the growth of pathogenic E. coli is of great and urgent concern. By modifying gold nanoparticles (AuNPs) with both poly[2-(methacrylamido)glucopyranose] (pMAG) and poly[2-(methacryloyloxy)ethyl trimethylammonium iodide] (pMETAI), a novel recyclable E. coli-specific-killing AuNP-polymer (ESKAP) nanocomposite is proposed in this study, which based on both the high affinity of glycopolymers toward E. coli pili and the merits of antibacterial quaternized polymers attached to gold nanoparticles. The properties of nanocomposites with different ratios of pMAG to pMETAI grafted onto AuNPs are studied. With a pMAG:pMETAI feed ratio of 1:3, the nanocomposite appeared to specifically adhere to E. coli and highly inhibit the bacterial cells. After addition of mannose, which possesses higher affinity for the lectin on bacterial pili and has a competitive advantage over pMAG for adhesion to pili, the nanocomposite was able to escape from dead E. coli cells, becoming available for repeat use. The recycled nanocomposite retained good antibacterial activity for at least three cycles. Thus, this novel ESKAP nanocomposite is a promising, highly effective, and readily recyclable antibacterial agent that specifically kills E. coli. This nanocomposite has potential applications in biological sensing, biomedical diagnostics, biomedical imaging, drug delivery, and therapeutics.

Synthetic Biomaterials from Metabolically Derived Synthons

The utility of metabolic synthons as the building blocks for new biomaterials is based on the early application and success of hydroxy acid based polyesters as degradable sutures and controlled drug delivery matrices. The sheer number of potential monomers derived from the metabolome (e.g., lactic acid, dihydroxyacetone, glycerol, fumarate) gives rise to almost limitless biomaterial structural possibilities, functionality, and performance characteristics, as well as opportunities for the synthesis of new polymers. This review describes recent advances in new chemistries, as well as the inventive use of traditional chemistries, toward the design and synthesis of new polymers. Specific polymeric biomaterials can be prepared for use in varied medical applications (e.g., drug delivery, tissue engineering, wound repair, etc.) through judicious selection of the monomer and backbone linkage.

Synthesis of an End-to-End Protein-Glycopolymer Conjugate via Bio-Orthogonal Chemistry

We report the synthesis of an end-to-end protein-glycopolymer conjugate, namely, site-specific modification of recombinant thrombomodulin at the C-terminus with a chain-end-functionalized glycopolymer. Thrombomodulin (TM) is an endothelial membrane glycoprotein that acts as a major cofactor in the protein C anticoagulant pathway. To closely mimic the glycoprotein structural feature of native TM, we proposed a site-specific glyco-engineering of recombinant TM with a glycopolymer. Briefly, recombinant TM containing the epidermal growth factor (EGF)-like domains 4, 5, and 6 (rTM₄₅₆) and a C-terminal azidohomoalanine was modified with a dibenzylcyclooctyne (DBCO) chain-end-functionalized glycopolymer via copper-free click chemistry to afford the end-to-end TM-glycopolymer conjugate. The TM glycoconjugation was confirmed with SDS-PAGE, Western blot, and protein C activation assay, respectively. The reported site-specific end-to-end protein glycopolymer conjugation approach facilitates uniform glycoconjugate formation via biocompatible chemistry and in high efficiency providing a rational strategy for generating an rTM-based anticoagulant agent.

Dual-stimuli-responsive glycopolymer bearing a reductive and photo-cleavable unit at block junction

Dual-stimuli-cleavable glycopolymers bearing a reductive and photo-cleavable unit at block junction were synthesized and characterization.

Facile synthesis of a multifunctional copolymer via a concurrent RAFT-enzymatic system for theranostic applications

Through a straightforward concurrent RAFT-enzymatic multicomponent polymerization system and subsequent post-polymerization modifications, a multi-functional copolymer for theranostic application has been efficiently prepared.

A biomimicking and electrostatic self-assembly strategy for the preparation of glycopolymer decorated photoactive nanoparticles

A biomimicking and electrostatic self-assembly strategy for the preparation of glycopolymer decorated photoactive nanoparticles.

Designing polymers with sugar-based advantages for bioactive delivery applications

Sugar-based polymers have been extensively explored as a means to increase drug delivery systems' biocompatibility and biodegradation. Here,we review he use of sugar-based polymers for drug delivery applications, with a particular focus on the utility of the sugar component(s) to provide benefits for drug targeting and stimuli responsive systems. Specifically, numerous synthetic methods have been developed to reliably modify naturally-occurring polysaccharides, conjugate sugar moieties to synthetic polymer scaffolds to generate glycopolymers, and utilize sugars as a multifunctional building block to develop sugar-linked polymers. The design of sugar-based polymer systems has tremendous implications on both the physiological and biological properties imparted by the saccharide units and are unique from synthetic polymers. These features include the ability of glycopolymers to preferentially target various cell types and tissues through receptor interactions, exhibit bioadhesion for prolonged residence time, and be rapidly recognized and internalized by cancer cells. Also discussed are the distinct stimuli-sensitive properties of saccharide-modified polymers to mediate drug release under desired conditions. Saccharide-based systems with inherent pH- and temperature-sensitive properties, as well as enzyme-cleavable polysaccharides for targeted bioactive delivery, are covered. Overall, this work emphasizes inherent benefits of sugar-containing polymer systems for bioactive delivery.

Tandem mass spectrometry and ion mobility mass spectrometry for the analysis of molecular sequence and architecture of hyperbranched glycopolymers

Multidimensional mass spectrometry techniques, combining matrix-assisted laser desorption/ionization (MALDI) or electrospray ionization (ESI) with tandem mass spectrometry (MS(2)), multistage mass spectrometry (MS(n)) or ion mobility mass spectrometry (IM-MS), have been employed to gain precise structural insight on the compositions, sequences and architectures of small oligomers of a hyperbranched glycopolymer, prepared by atom transfer radical copolymerization of an acrylate monomer (A) and an acrylate inimer (B), both carrying mannose ester pendants. The MS data confirmed the incorporation of multiple inimer repeat units, which ultimately lead to the hyperbranched material. The various possible structures of n-mers with the same composition were subsequently elucidated based on MS(2) and MS(n) studies. The characteristic elimination of bromomethane molecule provided definitive information about the comonomer connectivity in the copolymeric AB2 trimer and A2B2 tetramer, identifying as present only one of the three possible trimeric isomers (viz. sequence BBA) and only two of the six possible tetrameric isomers (viz. sequences BBA2 and BABA). Complementary IM-MS studies confirmed that only one of the tetrameric structures is formed. Comparison of the experimentally determined collision cross-section of the detected isomer with those predicted by molecular simulations for the two possible sequences ascertained BBA2 as the predominant tetrameric architecture. The multidimensional MS approaches presented provide connectivity information at the atomic level without requiring high product purity (due to the dispersive nature of MS) and, hence, should be particularly useful for the microstructure characterization of novel glycopolymers and other types of complex copolymers.

Carbohydrate-Conjugated Amino Acid-Based Fluorescent Block Copolymers: Their Self-Assembly, pH Responsiveness, and/or Lectin Recognition

An effective strategy has been documented to combine both carbohydrate and amino acid biomolecules in a single synthetic polymeric system via a reversible addition-fragmentation chain transfer (RAFT) polymerization technique. The resultant unique block copolymer was engineered to form uniform micelles with the desired projection of either selective or both amino acid/sugar residues on the outer surface with multivalency, providing pH-based stimuli-responsiveness and/or lectin recognition. The self-assembly process was studied in detail by field emission scanning electron microscopy (FE-SEM), dynamic light scattering (DLS), and UV-visible spectroscopy. The enhanced lectin binding behavior was observed for glyconanoparticles with both amino acid/sugar entities on the shell as compared to the only glycopolymer nanoparticle because of the higher steric hindrance factor in the case of only the glycopolymer nanoparticle. Fluorophore conjugation by postpolymerization functionalization was further exploited by fluorescence spectroscopy for evidencing the lectin recognition process.