Assembly of 2D ionic layers by reaction of alkali halides with the organic electrophile 7,7,8,8-tetracyano-p-quinodimethane (TCNQ)

Size Control of On-Surface Self-Assembled Nanochains Using Soft Building Blocks

Owing to their conformational flexibility, soft molecules with side chains play a crucial role in molecular self-assembly or self-organization processes toward bottom-up building of supramolecular nanostructures. However, the influence of the rotating side chains in the confined space and subsequent surface-confined supramolecular self-assembly remains rarely explored. Herein, using the spatial confinement effect between soft building blocks, we realized size control on surface-confined supramolecular coordination self-assembly through the synergy between the repulsive steric hindrance and the attractive chemical interactions. Combining scanning tunneling microscopy with density functional theory calculations and Monte Carlo simulations, we elucidated the effective repulsive force generated by the thermal wiggling motions of the soft building blocks, allowing length tuning of the self-assembled chain structures. Through a delicate balance between the repulsive interaction induced by the spatial confinement effect and the coordinate chemical interaction, we provide a new strategy for controlling the geometry of the on-surface supramolecular nanostructures.

Does F4TCNQ Adsorption on Cu(111) Form a 2D-MOF?

The results of a quantitative experimental structural investigation of the adsorption phases formed by 2,3,5,6-tetrafluoro-7,7',8,8'-tetracyanoquinodimethane (F4TCNQ) on Cu(111) are reported. A particular objective was to establish whether Cu adatoms are incorporated into the molecular overlayer. A combination of normal incidence X-ray standing waves, low-energy electron diffraction, scanning tunneling microscopy, and X-ray photoelectron spectroscopy measurements, complemented by dispersion-inclusive density functional theory calculations, demonstrates that F4TCNQ on Cu(111) does cause Cu adatoms to be incorporated into the overlayer to form a two-dimensional metal-organic framework (2D-MOF). This conclusion is shown to be consistent with the behavior of F4TCNQ adsorption on other coinage metal surfaces, despite an earlier report concluding that the adsorption structure on Cu(111) is consistent with the absence of any substrate reconstruction.

Construction and Structural Transformation of Metal-Organic Nanostructures Induced by Alkali Metals and Alkali Metal Salts

Metal-organic nanostructures are attractive in a variety of scientific fields, such as biomedicine, energy harvesting, and catalysis. Alkali-based metal-organic nanostructures have been extensively fabricated on surfaces based on pure alkali metals and alkali metal salts. However, their differences in the construction of alkali-based metal-organic nanostructures have been less discussed, and the influence on structural diversity remains elusive. In this work, from the interplay of scanning tunneling microscopy imaging and density functional theory calculations, we constructed Na-based metal-organic nanostructures by applying Na and NaCl as sources of alkali metals and visualized the structural transformations in real space. Moreover, a reverse structural transformation was achieved by dosing iodine into the Na-based metal-organic nanostructures, revealing the connections and differences between NaCl and Na in the structural evolutions, which provided fundamental insights into the evolution of electrostatic ionic interactions and the precise fabrication of alkali-based metal-organic nanostructures.

Electronic modulation and structural engineering of tetracyanoquinodimethane with enhanced reaction kinetics for aqueous NH4+ storage

Lithium-ion batteries (LIBs) have received much attention because of their environmental, financial, and safety concerns. The advantages of aqueous electrochemical energy storage include environmental friendliness and safety, and the development of prepared electrode materials is predicted to alleviate these issues. A redox-active organic compound, 7,7,8,8‑tetracyanoquinodimethane (TCNQ), is a suitable electrode for aqueous batteries. In this work, the porous and electronic interconnected structure of TCNQ is designed by electronic modulation and structure engineering. With the reduced graphene oxide (rGO) in situ homogeneous loading TCNQ by a one-step facile approach, the exquisite architecture has enhanced conductivity and connected conductive networks, favoring the storage and transportation of NH₄⁺ or electrons in aqueous electrolytes. As a cathode, the obtained TCNQ-rGO exhibits superior performance for NH₄⁺ batteries with an improved reversible capacity of 92.7 mAh/g at 1 A/g of quadruple capacity boosting to pure TCNQ and stable cycle life (5000 cycles at 10 A/g). The adjustment of the loading ratio of TCNQ and rGO for the cycling performance has been studied in detail. Furthermore, the superior ammonium storage mechanism of the TCNQ-rGO hybrid is thoroughly discussed by in situ Raman or ex situ measurements, which also determine the redox activity center groups of the TCNQ-rGO hybrid. Energy level calculations are conducted to help illustrate its potential as an electrode material. Our work demonstrates that electronic modulation and structural engineering of TCNQ can improve the electrochemical performance of molecular organic compound-based electrodes for aqueous rechargeable batteries in a simple and effective way.

Thermodynamic Driving Forces for Substrate Atom Extraction by Adsorption of Strong Electron Acceptor Molecules

A quantitative structural investigation is reported, aimed at resolving the issue of whether substrate adatoms are incorporated into the monolayers formed by strong molecular electron acceptors deposited onto metallic electrodes. A combination of normal-incidence X-ray standing waves, low-energy electron diffraction, scanning tunnelling microscopy, and X-ray photoelectron spectroscopy measurements demonstrate that the systems TCNQ and F₄TCNQ on Ag(100) lie at the boundary between these two possibilities and thus represent ideal model systems with which to study this effect. A room-temperature commensurate phase of adsorbed TCNQ is found not to involve Ag adatoms, but to adopt an inverted bowl configuration, long predicted but not previously identified experimentally. By contrast, a similar phase of adsorbed F₄TCNQ does lead to Ag adatom incorporation in the overlayer, the cyano end groups of the molecule being twisted relative to the planar quinoid ring. Density functional theory (DFT) calculations show that this behavior is consistent with the adsorption energetics. Annealing of the commensurate TCNQ overlayer phase leads to an incommensurate phase that does appear to incorporate Ag adatoms. Our results indicate that the inclusion (or exclusion) of metal atoms into the organic monolayers is the result of both thermodynamic and kinetic factors.

Exploiting Cooperative Catalysis for the On-Surface Synthesis of Linear Heteroaromatic Polymers via Selective C-H Activation

Regiospecific C-H activation is a promising approach to achieve extended polymers with tailored structures. While a recent on-surface synthetic approach has enabled regioselective homocoupling of heteroaromatic molecules, only small oligomers have been achieved. Herein, selective C-H activation for dehydrogenative C-C couplings of hexaazatriphenylene by Scholl reaction is reported for the first time. By combining low-temperature scanning tunneling microscopy (STM) and atomic force microscopy (AFM), we revealed the formation of one-dimensional polymers with a double-chain structure. The details of the growth process are rationalized by density functional theory (DFT) calculations, pointing out a cooperative catalytic action of Na and Ag adatoms in steering the C-H selectivity for the polymerization.

Rationally Designed Semiconducting 2D Surface-Confined Metal-Organic Network

Two-dimensional (2D) surface-confined metal-organic networks (SMONs) are metal-doped self-assembled monolayers of molecules on solid surfaces. We report the formation of uniform large-area solution-processed semiconducting SMONs of Pd and Zn with mellitic acid (MA) on a highly oriented pyrolytic graphite (HOPG) surface under ambient conditions. The microscopic structure is determined using scanning tunneling microscopy (STM), atomic force microscopy (AFM), and X-ray photoelectron spectroscopy (XPS). Using tunneling spectroscopy, we observed a reduction in the band gap of ≈900 and ≈300 meV for MA-Pd and MA-Zn SMONs, respectively, compared to the pure MA assembly. Concomitant density functional theory (DFT) calculations reveal that the coordination geometry and microscopic arrangement give rise to the observed reduction in the band gap. The dispersion of the frontier bands and their delocalization due to strong electronic coupling (between MA and metal) suggest that the MA-Pd SMON could potentially be a 2D electronic material.

Fine-tuning of two-dimensional metal-organic nanostructures via alkali-pyridyl coordination

Herein, we report a fine-tuning of the two-dimensional alkali-pyridyl coordination assemblies facilely realized by surface reaction between tetrapyridyl-porphyrin molecules and alkali halides on Ag(111) under a solventless ultrahigh vacuum condition. High-resolution scanning tunneling topography and X-ray photoelectron spectra reveal the formation of alkali-pyridyl coordination and the induced conformational tuning of the porphyrin macrocycle cores. Furthermore, employing other different alkali halide substitutes, we demonstrate a fine-tuning of the metal-organic nanostructures at the sub-Å scale. Postdeposition of Fe onto the as-formed precursor layer yields a two-dimensional bimetallic framework structure, manifesting a functionalization of the metal-organic interfaces.

Surface structural phase transition induced by the formation of metal-organic networks on the Si(111)--In surface

We studied the adsorption of 7,7,8,8-tetracyanoquinodimethane (TCNQ) on the Si(111)- -In surface, a known surface superconductor. Scanning tunneling microscopy shows the development of a surface-confined metal-organic network (SMON) where TCNQ molecules coordinate with indium atoms from the underlying reconstruction. The formation of the SMON causes a surface structural phase transition from the reconstruction to a previously unknown 5 × 5 reconstruction of the Si(111)-In surface. Scanning tunneling spectroscopy measurements indicate that the 5 × 5 reconstruction has a stronger insulating character than the reconstruction. Density-functional-theory calculations are used to evaluate the atomic arrangement and stability of the 5 × 5 and reconstructions as a function of In coverage, and suggest that the structural phase transition is driven by a slight reduction of the In coverage, caused by the incorporation of indium atoms into the SMON.

Achieving current rectification ratios ≥ 105 across thin films of coordination polymer

A record value of the current rectification ratio (RR ≥ 10⁵) across molecularly doped thin films of a Cu(ii)-coordination polymer is achieved.

Downsizing coordination polymers (CPs) to thin film configurations is a prerequisite for device applications. However, fabrication of thin films of CPs including metal–organic frameworks (MOFs) with reasonable electrical conductivity is challenging. Herein, thin film fabrication of a Cu(ii)-CP employing a layer-by-layer method is demonstrated whereby a self-assembled monolayer on Au was used as the functionalized substrate. Growth of the Cu(ii)-CP at the solid–liquid interface generated open-metal Cu(ii) sites in the thin film which were susceptible to activation by molecular dopant molecules. A significant enhancement in in-plane electrical conductivity and an unheralded cross-plane current rectification ratio (exceeding 10⁵ both at room-temperature and at an elevated temperature) were achieved. Such a remarkable rectification ratio was realized, similar to those of commercial Si rectifier diodes. This phenomenon is attributed to the formation of an electronic heterostructure in the molecularly doped thin film. Molecular doping additionally transformed the interfacial properties of thin films from hydrophilic to highly hydrophobic.

A Comparative Computational Study of the Adsorption of TCNQ and F4-TCNQ on the Coinage Metal Surfaces

The adsorption of tetracyanoquinodimethane and of the closely related derivative tetrafluorotetracyanoquinodimethane on the (111) surfaces of the coinage metals, namely, copper, silver, and (unreconstructed) gold, has been studied by dispersion-corrected ab initio density functional theory calculations. In order to separate the molecule-substrate interaction from the effects of molecule-molecule interaction, only the isolated molecules are considered. The results show that, in this case, the strength of the interaction of both molecules with the surfaces decreases in the expected order Cu > Ag > Au. The total amount of charge transfer, however, behaves in a different way, being larger for Ag and smaller for Cu and Au. This trend can be explained by a combination of the differences in the work functions of the three metals and the amount of backdonation between the molecule and the metal.

Reactivity of Bioinspired Magnesium-Organic Networks under CO2 and O2 Exposure

Photosynthesis is the model system for energy conversion. It uses CO₂ as a starting reactant to convert solar energy into chemical energy, i.e., organic molecules or biomass. The first and rate-determining step of this cycle is the immobilization and activation of CO₂, catalyzed by RuBisCO enzyme, the most abundant protein on earth. Here, we propose a strategy to develop novel biomimetic two-dimensional (2D) nanostructures for CO₂ adsorption at room temperature by reductionist mimicking of the Mg-carboxylate RuBisCO active site. We present a method to synthesize a 2D surface-supported system based on Mg²⁺ centers stabilized by a carboxylate environment and track their structural dynamics and reactivity under either CO₂ or O₂ exposure at room temperature. The CO₂ molecules adsorb temporarily on the Mg²⁺ centers, producing a charge imbalance that catalyzes a phase transition into a different configuration, whereas O₂ adsorbs on the Mg²⁺ center, giving rise to a distortion in the metal-organic bonds that eventually leads to the collapse of the structure. The combination of bioinspired synthesis and surface reactivity studies demonstrated here for Mg-based 2D ionic networks holds promise for the development of new catalysts that can work at room temperature.

Probing the interplay between geometric and electronic structure in a two-dimensional K-TCNQ charge transfer network

Scanning tunnelling microscopy (STM), low energy electron diffraction (LEED), ultraviolet and soft X-ray photoelectron spectroscopy (UPS and SXPS) have been used to characterise the formation of a coadsorption phase of TCNQ and K on Ag(111), while the normal incident X-ray standing waves (NIXSW) technique has been used to obtain quantitative structural information. STM and LEED show that an ordered incommensurate phase is formed in which the K atoms are surrounded by four TCNQ molecules in a 'windmill' motif, characteristic of other metal/TCNQ phases, in which the nominal TCNQ : K stoichiometry is 1 : 1. UPS and SXPS data indicate the TCNQ is in a negatively-charged state. NIXSW results show that the carbon core of the TCNQ is essentially planar at a height above the Ag(111) surface closely similar to that found without coadsorbed K. In the presence of TCNQ the height of the K ions above the surface is significantly larger than on clean Ag(111), and the ions occupy sites above 'holes' in the TCNQ network. NIXSW data also show that the N atoms in the molecules must occupy sites with at least two different heights above the surface, which can be reconciled by a tilt or twist of the TCNQ molecules, broadly similar to the geometry that occurs in bulk TCNQ/K crystals.

Building two-dimensional metal-organic networks with tin

We show that Sn atoms combined with organic ligands can be used to build 2D coordination networks on Au(111) surfaces.

Correlation of Kondo effect and molecular conformation of the acceptor molecule in the TTF-TCNE charge transfer complex

A Kondo resonance has been observed on purely organic molecules in several combinations of charge transfer complexes on a metal surface. It has been regarded as a fingerprint of the transfer of one electron from the donor to the extended π orbital of the acceptor's LUMO. Here, we investigate the stoichiometric checkerboard structure of tetrathiafulvalene (TTF) and tetracyanoethylene (TCNE) on a Au(1 1 1) surface using scanning tunneling and atomic force microscopy at 4.8 K. We find a bistable state of the TCNE molecules with distinct structural and electronic properties. The two states represent different conformations of the TCNE within the structure. One of them exhibits a Kondo resonance, whereas the other one does not, despite of both TCNE types being singly charged.

TCNQ Physisorption on the Topological Insulator Bi2 Se3

Topological insulators are promising candidates for spintronic applications due to their topologically protected, spin-momentum locked and gapless surface states. The breaking of the time-reversal symmetry after the introduction of magnetic impurities, such as 3d transition metal atoms embedded in two-dimensional molecular networks, could lead to several phenomena interesting for device fabrication. The first step towards the fabrication of metal-organic coordination networks on the surface of a topological insulator is to investigate the adsorption of the pure molecular layer, which is the aim of this study. Here, the effect of the deposition of the electron acceptor 7,7,8,8-tetracyanoquinodimethane (TCNQ) molecules on the surface of a prototypical topological insulator, bismuth selenide (Bi₂ Se₃ ), is investigated. Scanning tunneling microscope images at low-temperature reveal the formation of a highly ordered two-dimensional molecular network. The essentially unperturbed electronic structure of the topological insulator observed by photoemission spectroscopy measurements demonstrates a negligible charge transfer between the molecular layer and the substrate. Density functional theory calculations confirm the picture of a weakly interacting adsorbed molecular layer. These results reveal significant potential of TCNQ for the realization of metal-organic coordination networks on the topological insulator surface.

Two-dimensional self-assembled nanostructures of nucleobases and their related derivatives on Au(111)

The construction of two-dimensional (2D) self-assembled nanostructures has been one of the considerably interesting areas of on-surface chemistry in the past few decades, and has benefited from the rapid development and improvement of scanning probe microscopy techniques. In this research field, many attempts have been made in the controllable fabrication of well-ordered and multifunctional surface nanostructures, which attracted interest because of the prospect for artificial design of functional molecular nanodevices. DNA and RNA are considered to be programmable self-assembly systems and it is possible to use their base sequences to encode instructions for assembly in a predetermined fashion at the nanometer scale. As important constituents of nucleic acids, nucleobases, with intrinsic functional groups for hydrogen bonding, coordination bonding, and electrostatic interactions, can be employed as a potential system for the versatile construction of various biomolecular nanostructures, which may be used to structure the self-assembly of DNA-based artificial molecular constructions and play an important role in novel biosensors based on surface functionalization. In this article, we will review the recent progress of on-surface self-assembly of nucleobases and their derivatives together with different reactants (e.g., metals, halogens, salts and water), and as a result, various 2D surface nanostructures are summarized.

Study of the electronic structure of electron accepting cyano-films: TCNQversusTCNE

In this article, we perform systematic research on the electronic structure of two closely related organic electron acceptor molecules (TCNQ and TCNE), which are of technological interest due to their outstanding electronic properties. These studies have been performed from the experimental point of view by the use electron spectroscopies (XPS and UPS) and supported theoretically by the use of ab-initio DFT calculations. The cross-check between both molecules allows us to identify the characteristic electronic features of each part of the molecules and their contribution to the final electronic structure. We can describe the nature of the band gap of these materials, and we relate this with the appearance of the shake-up features in the core level spectra. A band bending and energy gap reduction of the aforementioned electronic structure in contact with a metal surface are seen in the experimental results as well in the theoretical calculations. This behavior implies that the TCNQ thin film accepts electrons from the metal substrate becoming a Schottky n-junction.

On-surface synthesis: a promising strategy toward the encapsulation of air unstable ultra-thin 2D materials

2D black phosphorus (BP) and transition metal chalcogenides (TMCs) have beneficial electronic, optical, and physical properties at the few-layer limit. However, irreversible degradation of exfoliated or chemical vapor deposition-grown ultrathin BP and TMCs like GaSe via oxidation under ambient conditions limits their applications. Herein, the on-surface growth of an oxidation-resistant 2D thin film of a metal coordination polymer is demonstrated by multiscale simulations. We show that the preparation of such heterostructures can be conducted in solution, in which pristine BP and GaSe present better stability than in an air environment. Our calculations reveal that the interaction between the polymer layer and 2D materials is dominated by van der Waals forces; thus, the electronic properties of pristine BP and GaSe are well preserved. Meanwhile, the isolation from oxygen and water can be achieved by monolayer polymers, due to the nature of their close-packed layers. Our facile strategy for enhancing the environmental stability of ultrathin materials is expected to accelerate efforts to implement 2D materials in electronic and optoelectronic applications.

Molecular Ion Formation by Photoinduced Electron Transfer at the Tetracyanoquinodimethane/Au(111) Interface

Optically induced processes in organic materials are essential for light harvesting, switching, and sensor technologies. Here we studied the electronic properties of the tetracyanoquinodimethane(TCNQ)/Au(111) interface by using two-photon photoemission spectroscopy. For this interface we demonstrated the lack of charge-transfer interactions, but we found a significant increase in the sample work function due to UV-light illumination, while the electronic structure of the TCNQ-derived states remain unaffected. Thereby the work function of the interface can be tuned over a wide range via the photon dose. We assigned this to a photoinduced metal-to-molecule electron transfer creating negative ions. The electrons are bound by a small potential barrier. Thus thermal activation reverses the process resulting in the original work function value. The presented photoinduced charge transfer at the TCNQ/Au(111) interface can be used for continuous work function tuning across the substrate's work function, which can be applied in device-adapted hole-injection layers or organic UV-light sensors.

Real-space evidence of the formation of the GCGC tetrad and its competition with the G-quartet on the Au(111) surface

From the interplay of high-resolution scanning tunneling microscopy (STM) imaging and density functional theory (DFT) calculations, we show the first real-space evidence of the formation of GCGC tetrad on an Au(111) surface, and further investigate its competition with the well-known G-quartet with the aid of NaCl under ultrahigh vacuum (UHV) conditions.

Structural diversity of metal-organic self-assembly assisted by chlorine

From the combination of STM imaging and DFT calculations, we show that both alkali metal and halogens interact with different sites of the target molecules resulting in structural formation in a synergistic way. The elementary metal-organic motifs are connected by Cl in a variety of fashions demonstrating structural diversity.

Two-dimensional core-shell donor-acceptor assemblies at metal-organic interfaces promoted by surface-mediated charge transfer

Organic charge transfer (CT) complexes obtained by combining molecular electron donors and acceptors have attracted much interest due to their potential applications in organic opto-electronic devices. In order to work, these systems must have an electronic matching - the highest occupied molecular orbital (HOMO) of the donor must couple with the lowest unoccupied molecular orbital (LUMO) of the acceptor - and a structural matching, so as to allow direct intermolecular CT. Here it is shown that, when molecules are adsorbed on a metal surface, novel molecular organizations driven by surface-mediated CT can appear that have no counterpart in condensed phase non-covalent assemblies of donor and acceptor molecules. By means of scanning tunneling microscopy and spectroscopy it is demonstrated that the electronic and self-assembly properties of an electron acceptor molecule can change dramatically in the presence of an additional molecular species with marked electron donor character, leading to the formation of unprecedented core-shell assemblies. DFT and classical force-field simulations reveal that this is a consequence of charge transfer from the donor to the acceptor molecules mediated by the metallic substrate.

Two-Dimensional Ketone-Driven Metal-Organic Coordination on Cu(111)

Two-dimensional metal-organic nanostructures based on the binding of ketone groups and metal atoms were fabricated by depositing pyrene-4,5,9,10-tetraone (PTO) molecules on a Cu(111) surface. The strongly electronegative ketone moieties bind to either copper adatoms from the substrate or codeposited iron atoms. In the former case, scanning tunnelling microscopy images reveal the development of an extended metal-organic supramolecular structure. Each copper adatom coordinates to two ketone ligands of two neighbouring PTO molecules, forming chains that are linked together into large islands through secondary van der Waals interactions. Deposition of iron atoms leads to a transformation of this assembly resulting from the substitution of the metal centres. Density functional theory calculations reveal that the driving force for the metal substitution is primarily determined by the strength of the ketone-metal bond, which is higher for Fe than for Cu. This second class of nanostructures displays a structural dependence on the rate of iron deposition.

Tunable lanthanide-directed metallosupramolecular networks by exploiting coordinative flexibility through ligand stoichiometry

Eu forms 4-fold or 5-fold coordination structures with terpyridyl and carbonitrile ligands on the Au(111) surface depending on the ligand stoichiometry.

Structural reconstruction and spontaneous formation of Fe polynuclears: a self-assembly of Fe–porphyrin coordination chains on Au(111) revealed by scanning tunneling microscopy

Structural reconstruction and uniformly sized Fe polynuclears of a self-assembled Fe–porphyrin coordination chain structure are investigated by scanning tunneling microscopy.

Ionic compound mediated rearrangement of 3, 4, 9, 10-perylene tetracarboxylic dianhydride molecules on Ag(100) surface

Tailoring of the assembly structure of organic molecular monolayer is of great importance to improve the performance of molecular devices. In this work, a typical ionic compound, namely KCl, was used to mediate the rearrangement of 3, 4, 9, 10-perylene tetracarboxylic dianhydride (PTCDA) monolayer on Ag(100). Combined scanning tunneling microscopy (STM) and low energy electron diffraction (LEED) results indicate that both molecule and molecular superlattice would rotate after the dosing of KCl. The density functional theory calculation shows that KCl would exist in the form of molecules rather than ions on Ag(100) and demonstrates that experimentally observed structural transition induced by KCl molecules is energetically favored.

Solventless Formation of G-Quartet Complexes Based on Alkali and Alkaline Earth Salts on Au(111)

Template cations have been extensively employed in the formation, stabilization and regulation of structural polymorphism of G-quadruplex structures in vitro. However, the direct addition of salts onto solid surfaces, especially under ultra-high-vacuum (UHV) conditions, to explore the feasibility and universality of the formation of G-quartet complexes in a solventless environment has not been reported. By combining UHV-STM imaging and DFT calculations, we have shown that three different G-quartet-M (M: Na/K/Ca) complexes can be obtained on Au(111) using alkali and alkaline earth salts as reactants. We have also identified the driving forces (intra-quartet hydrogen bonding and electrostatic ionic bonding) for the formation of these complexes and quantified the interactions involved. Our results demonstrate a novel route to fabricate G-quartet-related complexes on solid surfaces, providing an alternative feasible way to bring metal elements to surfaces for constructing metal-organic systems.

Low-temperature fabrication of alkali metal-organic charge transfer complexes on cotton textile for optoelectronics and gas sensing

A generalized low-temperature approach for fabricating high aspect ratio nanorod arrays of alkali metal-TCNQ (7,7,8,8-tetracyanoquinodimethane) charge transfer complexes at 140 °C is demonstrated. This facile approach overcomes the current limitation associated with fabrication of alkali metal-TCNQ complexes that are based on physical vapor deposition processes and typically require an excess of 800 °C. The compatibility of soft substrates with the proposed low-temperature route allows direct fabrication of NaTCNQ and LiTCNQ nanoarrays on individual cotton threads interwoven within the 3D matrix of textiles. The applicability of these textile-supported TCNQ-based organic charge transfer complexes toward optoelectronics and gas sensing applications is established.

Engineering two-dimensional hybrid NaCl–organic coordinated nanoarchitectures on metal surfaces

We selectively engineer three two-dimensional self-assembled hybrid PTCDI–NaCl nanoarchitectures,i.e.a flower-structure, a mesh-structure and a chain-structure on Au(111).

Redox-active on-surface assembly of metal-organic chains with single-site Pt(II)

The formation and stabilization of well-defined transition-metal single sites at surfaces may open new routes to achieve higher selectivity in heterogeneous catalysts. Organic ligand coordination to produce a well-defined oxidation state in weakly reducing metal sites at surfaces, desirable for selective catalysis, has not been achieved. Here, we address this using metallic platinum interacting with a dipyridyl tetrazine ligand on a single crystal gold surface. X-ray photoelectron spectroscopy measurements demonstrate the metal-ligand redox activity and are paired with molecular-resolution scanning probe microscopy to elucidate the structure of the metal-organic network. Comparison to the redox-inactive diphenyl tetrazine ligand as a control experiment illustrates that the redox activity and molecular-level ordering at the surface rely on two key elements of the metal complexes: (i) bidentate binding sites providing a suitable square-planar coordination geometry when paired around each Pt, and (ii) redox-active functional groups to enable charge transfer to a well-defined Pt(II) oxidation state. Ligand-mediated control over the oxidation state and structure of single-site metal centers that are in contact with a metal surface may enable advances in higher selectivity for next generation heterogeneous catalysts.

Fine-tuning the electrostatic properties of an alkali-linked organic adlayer on a metal substrate

The performance of modern organic electronic devices is often determined by the electronic level alignment at a metal-organic interface. This property can be controlled by introducing an interfacial electrostatic dipole via the insertion of a stable interlayer between the metallic and the organic phases. Here, we use density functional theory to investigate the electrostatic properties of an assembled structure formed by alkali metals coadsorbed with 7,7,8,8-tetracyanoquinodimethane (TCNQ) molecules on a Ag(100) substrate. We find that the interfacial dipole buildup is regulated by the interplay of adsorption energetics, steric constraints and charge transfer effects, so that choosing chemical substitutions within TCNQ and different alkali metals provides a rich playground to control the systems' electrostatics and in particular fine-tune its work-function shift.

Toward the microscopic identification of anions and cations at the ionic liquid|Ag(111) interface: a combined experimental and theoretical investigation

The interaction between an adsorbed 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide, [BMP][TFSA], ionic liquid (IL) layer and a Ag(111) substrate, under ultrahigh-vacuum conditions, was investigated in a combined experimental and theoretical approach, by high-resolution scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), and dispersion-corrected density functional theory calculations (DFT-D). Most importantly, we succeeded in unambiguously identifying cations and anions in the adlayer by comparing experimental images with submolecular resolution and simulated STM images based on DFT calculations, and these findings are in perfect agreement with the 1:1 ratio of anions and cations adsorbed on the metal derived from XPS measurements. Different adlayer phases include a mobile 2D liquid phase at room temperature and two 2D solid phases at around 100 K, i.e., a 2D glass phase with short-range order and some residual, but very limited mobility and a long-range ordered 2D crystalline phase. The mobility in the different adlayer phases, including melting of the 2D crystalline phase, was evaluated by dynamic STM imaging. The DFT-D calculations show that the interaction with the substrate is composed of mainly van der Waals and weak electrostatic (dipole-induced dipole) interactions and that upon adsorption most of the charge remains at the IL, leading to attractive electrostatic interactions between the adsorbed species.

Synthesis and characterization of redox-active charge-transfer complexes with 2,3,5,6-tetracyanopyridine (TCNPy) for the photogeneration of pyridinium radicals

The heteroaromatic polynitrile compound tetracyanopyridine (TCNPy) is introduced as a new electron acceptor for the formation of deeply colored charge-transfer complexes. In MeCN, TCNPy is characterized by a quasireversible one-electron-reduction process at -0.51 V (versus SCE). The tetracyanopyridine radical anion undergoes a secondary chemical reaction, which is assigned to a protonation step. TCNPy has been demonstrated to generate 1:1 complexes with various electron donors, including tetrathiafulvalene (TTF) and dihydroxybenzene derivatives, such as p-hydroquinone and catechol. Visible- or NIR-light-induced excitation of the intense charge-transfer bands of these compounds leads to a direct optical electron-transfer process for the formation of the corresponding radical-ion pairs. The presence of available electron donors that contain protic groups in close proximity to the TCNPy acceptor site opens up a new strategy for the photocontrolled generation of pyridinium radicals in a stepwise proton-coupled electron-transfer (PCET) sequence.