Optical chemosensors and reagents to detect explosives

Effect of Silyl Ether Bulk on Excited-State Intramolecular Proton Transfer-Based Sensing of Extant Hydrogen Fluoride for G-Series Nerve Agent Detection

Luminescence-based sensing provides a method for the rapid detection of nerve agents. Previous approaches have generally focused on sensing materials containing a nucleophilic group that can react with the electrophilic phosphorus atom found in nerve agents. Herein we report an alternative approach for the detection of phosphonofluoridate-based G-series nerve agents that utilizes the fact they contain hydrogen fluoride. We have developed silylated sensing materials based on an excited-state intramolecular proton transfer (ESIPT) reporter compound, 2-[benzo[d]thiazol-2-yl]phenol. Thin films of differently silylated 2-[benzo[d]thiazol-2-yl]phenol were found to react with the hydrogen fluoride found in di-iso-propyl fluorophosphate (DFP), a simulant of sarin (G-series nerve agent), and turn on the ESIPT emission of the reporter compound. The use of the ESIPT emission reduced the impact of background fluorescence and improved the sensitivity of the detection. The effectiveness of the approach was dependent on the stability of the silyl protecting group used, with the least sterically hindered (trimethylsilyl) found to be too unstable to the ambient environment while the most sterically hindered, e.g., tri-iso-propylsilyl and tert-butyldiphenylsilyl were found to be insufficiently reactive to be useful in a real detection scenario. The sensing material composed of the tert-butyl dimethylsilyl protected 2-[benzo[d]thiazol-2-yl]phenol was found to have the best balance between stability under ambient conditions, and reactivity and selectivity to hydrogen fluoride. In a 3 s exposure, it could detect hydrogen fluoride down to a concentration of around 23 ppm in DFP with 99% purity.

5-Oxo-7,7-Dimethyl-5,6,7,8-Tetrahydro-4-H-Chromene Bearing N, N-Dimethylaniline as Turn-Off Fluorescent Chemosensor for Picric Acid in Real Water Sample

We have synthesized a one-pot, three-component pyran-based fluorescence chemosensor using onion extract as a green catalyst. The confirmed structure of the 1:2 binding of receptor SPR-2-picric acid adduct revealed that the pyran-based receptor accommodated two guest picric acid molecules through non-covalent interactions. UV-Vis and fluorescence spectroscopy show high selectivity and sensitivity towards picric acid. The 1D/2D NMR and Job's plot analysis show the complexation and stoichiometric binding of the receptor SPR-2 with picric acid are 1:2. The 1H NMR spectral studies confirm that the formation of receptor SPR-2-picric acid adduct via weak hydrogen bonding. The cooperativity of the receptor SPR-2-picric acid adduct shows negative cooperativity due to the weak hydrogen bonding of receptor SPR-2 and picric acid. Further, the density functional theory (DFT) confirmed the molecular level interaction of the SPR-2 and receptor SPR-2-Picric acid adduct. The receptor was effectively used to assess picric acid concentrations in real water samples.

Tellurium Containing Long Lived Emissive Fluorophore for Selective and Visual Detection of Picric Acid through Photo-Induced Electron Transfer

A novel tellurium (Te) containing fluorophore, 1 and its nickel (2) and copper (3) containing metal organic complex (MOC) have been synthesized to exploit their structural and optical properties and to deploy these molecules as fluorescent probes for the selective and sensitive detection of picric acid (PA) over other commonly available nitro-explosives. Furthermore, density functional theory (DFT) and single crystal X-ray diffraction (SCXRD) techniques revealed the inclusion of "soft" Tellurium (Te) and "hard" Nitrogen (N), Oxygen (O) atoms in the molecular frameworks. Owing to the presence of electron rich "N" and "O" atoms along with "Te" in the molecular framework, 1 could efficiently and selectively sense PA with more than 80 % fluorescence quenching efficiency in organic medium and having detection limit of 4.60 μM. The selective detection of PA compared to other nitro-explosives follows a multi-mechanism based "turn-off" sensing which includes photo-induced electron transfer (PET), electrostatic (π-π stacking and π-anion/cation) interaction, intermolecular hydrogen bonding and inner filter effect (IFE). The test strip study also establishes the sensitivity of 1 for detection of PA.

A Julolidine Aldehyde Dansyl Hydrazine Schiff Base as Fluorescence Chemosensor for Zn2+ ions Recognition and its Application

The Schiff base fluorescent probe (Dz-Jul), containing julolidine aldehyde and dansyl hydrazine, was derived using a simple condensation. This chemosensor showed high selectivity towards Zn2+ and quick response (170 s) in DMSO/H2O solutions (8/2, v/v, pH 7.2 buffer). A fluorometric titration determined that Dz-Jul-Zn2+ has a binding ratio of 1:1, and the association constant (Ka) is 1.03 × 105 M-1. The Dz-Jul detection limit of Zn2+ ions was 15 nM, much lower than the WHO standard (76.0 nM). DFT, ESI mass, and FTIR spectral demonstrated a plausible complexation mode between Dz-Jul and Zn2+ ions. In actual water samples, Zn2+ has been detected with good detection performance using Dz-Jul. Additionally, Dz-Jul-coated test strips allowed for rapid and qualitative monitoring of Zn2+ ions in a visible manner.

Nanosculptured tungsten oxide: High-efficiency SERS sensor for explosives tracing

The accurate and rapid identification of explosives and their toxic by-products is an important aspect of safety protocols, forensic investigations and pollution studies. Herein, surface-enhanced Raman scattering (SERS) is used to detect different explosive molecules using an improved substrate design by controllable oxidation of the tungsten surface and deposition of Au layers. The resulting furrow-like morphology formed at the intersection of the tungsten Wulff facets increases nanoroughness and improves the SERS response by over 300 % compared to the untreated surface. The substrate showed excellent reproducibility with a relative standard deviation of less than 15 % and a signal recovery of over 95 % after ultrafast Ar/O2 plasma cleanings. The detection limit for the "dried on a surface" measurement case was better than 10-8 M using the moving scanning regime and an acquisition time of 10 s, while for the "water droplets on a surface" scenario the LoD is 10-7, which is up to 2 orders of magnitude better than the UV-Vis spectroscopy method. The substrates were successfully used to classify the molecular fingerprints of HMX, Tetryl, TNB and TNT, demonstrating the efficiency of a sensor for label-free SERS screening in the practice of monitoring traces of explosives in the water medium.

Fluorescent Carbon Nitride Nanoparticles for Picric Acid Sensing

Detection of nitroaromatic explosives is essential in the area of environmental safety. Fluorescent carbon nitride nanoparticles is a promising material for this purpose. Herein, we have prepared fluorescent carbon nitride nanoparticles (CNNPs) by one step thermal treatment of formamide. These fluorescent CNNPs is sensitive towards picric acid (PA) than other analytes both in aqueous medium and on test paper which is witnessed by fluorescence quenching based on inner filter effect (IFE). The PA detection with the fluorescent CNNPs is observed in the concentration ranges, 0 µM to 60 µM with linear range of 10 nM to 25 µM. The minimum detection limit in aqueous medium and solid phase are determined to be 26.20 nM and 10 µM respectively. Finally, the fluorescent CNNPs is applied for detection of PA in real water samples. The recoveries are in the ranges from 99.54 to 116.35% with relative standard deviation less than 3.85%. This proposed fluorescent method can act as suitable analytical technique to monitored PA concentration in water samples.

Design and Synthesis of an Efficient Fluorescent Probe Based on Oxacalix[4]arene for the Selective Detection of Trinitrophenol (TNP) Explosives in Aqueous System

We present the synthesis of a new oxacalix[4]arene system, DMANSOC, wherein two 5-(dimethylamino)-1-naphthalene sulfonamide subunits are attached to the lower rims of the basic oxacalix[4]arene platform. Extensive spectrophotometric studies were conducted to investigate the selectivity and sensitivity of DMANSOC towards nitroaromatic explosives. Detailed analysis of spectrophotometric data, utilizing techniques such as Stern-Volmer, Benesi-Hildebrand, Job's plot, and interference study, unequivocally demonstrated the effectiveness of DMANSOC as a highly efficient fluorescent sensor for 2,4,6-trinitrophenol explosive (TNP) detection in an aqueous medium. The sensor exhibited a linear concentration range of 7.5 μM to 50 μM, with a low detection limit of 4.64 μM and a high binding affinity of 2.45 × 104 M towards TNP. Furthermore, the efficiency of the sensor in environmental samples contaminated with TNP was evaluated, yielding excellent recovery rates. Complementary DFT calculations and molecular dynamics simulations were performed to elucidate the mechanism behind the selective fluorescence quenching of DMANSOC in the presence of TNP.

Efficient Multi-stimulus-Responsive Luminescent Eu(III)-Modified HOFs Materials: Detecting Thiram and Caffeic Acid and Constructing a Flexible Substrate Anti-counterfeiting Platform

The powerful capability of multi-stimulus-responsive luminescent hydrogen-bonded organic frameworks (HOFs) to respond to external chemical or physical stimuli in various manners makes them appealing in the luminescence anti-counterfeiting field. Herein, a novel Eu3+-functionalized HOF (Eu@GC-2) that combines the emission of HOFs with the characteristic emission of Eu3+ ions has been successfully synthesized, which can generate various fluorescence at different excitation wavelengths. Eu@GC-2 has enormous potential as a raw material for a paper-based sensor that is designed for detecting the pesticides thiram and caffeic acid in crops with favorable selectivity, anti-interference, and high efficiency. Based on the above excellent properties, Ln3+-functionalized HOFs (Ln@GC-2) were then employed to produce four luminescent anti-counterfeiting inks. With the incorporation of back-propagation neural network and Gray code conversion functions, a multi-stimulus-responsive luminescent anti-counterfeiting platform, coregulated by the excitation light and the chemical reagent, has been constructed. This approach can not only achieve multiple encryptions and fast information identification but also enhance the code-breaking complexity, making it an efficient strategy for information encryption and decryption.

Rapid detection of trace nitrobenzene in water via SERS using a portable Raman spectrometer

Nitrobenzene is currently the most widely used explosive substance, and is known for its high toxicity and mutagenicity. It can cause severe environmental and water pollution, posing a risk to public health. Among various explosives analysis methods, surface-enhanced Raman spectroscopy (SERS) has the advantages of fast analysis speed, low detection cost, and easy operation, and has become one of the most promising analytical detection methods. Here, we present a portable and reliable sol-based SERS method for the detection of trace amounts of 2,4,6-trinitrotoluene (TNT) in different water bodies. The Meisenheimer complex formed by nitrobenzene and hydrazine hydrate can assemble on unmodified Au nanoparticles in a sol via Au-N bonds, enabling rapid detection of TNT in seawater, lake water, and tap water using a portable Raman spectrometer. Experimental results show that this SERS method can complete the detection within a few minutes and the detection sensitivity can reach 0.01 mg L-1, which is far lower than China's national standard of no more than 0.5 mg L-1. Furthermore, this method was also successfully applied to detect trace 2,4-dinitrotoluene (2,4-DNT) and picric acid (2,4,6-trinitrophenol) in water, demonstrating its strong applicability for on-site detection of nitrobenzene explosives.

A facile and novel AIE vesicle as nanoprobe for simple and rapid detection of TNT in water

Trinitrotoluene (TNT) in water will damage biological tissues and organs of the human body due to its high toxicity and risk. However, the simple and rapid detection of TNT in water is always a challenging task. Herein, we reported a novel aggregation-induced emission-a vesicle (AIE-a-V) as fluorescent nanoprobe for the detection of TNT in water by π-π self-assembly of π-π stacking induced aggregation-emission. The AIE-a-V was spherical in shape with a hydrodynamic diameter of ∼106 nm and possessed robust stability. In addition, the AIE-a-V showed strong fluorescence and its fluorescence would quickly disappear after contact with TNT. Based on this, without any cumbersome operation, the AIE-a-V could detect the presence of TNT in water within 60 s, and its minimum detectable concentration was as low as 50 nM. Moreover, the AIE-a-V could selectively detect TNT in water and would not be affected by other components, including other aromatic compounds, toxic metals, and acid-base. Therefore, the new AIE-a-V with simplicity, rapidity, sensitivity and selectivity have great application potential in the detection of TNT in water.

Label-Free Detection of Unbound Bilirubin and Nitrophenol Explosives in Water by a Mechanosynthesized Dual Functional Zinc Complex: Recognition of Picric Acid in Various Common Organic Media

High levels of unconjugated bilirubin (UB) in serum lead to asymptomatic and neonatal jaundice and brain dysfunctions. Herein, we have reported the detection of UB at as low as 1 μM in an aqueous alkaline medium using a Zn(II) complex. The specificity of the complex has been validated by the HPLC in the concentration window 6-90 μM, which is rare. The sensory response of the probe at physiological pH against nitro explosives developed it as an instant-acting fluorosensor for picric acid (PA) and 2,4-dinitrophenol (2,4-DNP). Spectroscopic titration provided a binding constant of 4×105  M-1 with PA. The naked eye detection was found to be 15 μM. The solid-state photoluminescent nature of the complex enabled it for PA sensing in the solid phase. Interestingly, the probe remained fluorescent in various volatile and non-volatile organic solvents. As a result, it can also detect PA and 2,4-DNP in a wide range of common organic media. NMR studies revealed the coordination of PA, 2,4-DNP, and UB to the Zn(II) center of the probe, which is responsible for the observed quenching of the probe with the analytes.

Multifunctional Luminescent 3D Ln-MOFs with High Sensitivity for Trace Detection of Micronutrients

The synthesis of two versatile fluorescent metal-organic frameworks (MOFs), [Eu(4-NCP)(1,4-bdc)]n·0.5H2O (1) and [Eu(4-NCP)(4,4'-bpdc)]n·0.75H2O (2) (HNCP = 2-(4-carboxyphenyl)imidazo(4,5-f)-(1,10)phenanthroline, 1,4-H2bdc = benzene-1,4-dicarboxylic acid, 4,4'-H2bpdc = 4,4'-biphenyldicarboxylic acid), was carried out using a hydrothermal method. These MOFs were characterized through various advanced technologies to determine their structural information. The results indicate that both MOFs exhibited 3D network structures with specific topologies. Furthermore, these MOFs demonstrated exceptional thermal stabilities and adsorption capabilities. Additionally, complex 2 was utilized for studying the fluorescence sensing properties of various micronutrients including metal ions, nitro aromatic compounds, and biological small molecules. Notably, complex 2 showed promising potential as a multifunctional sensor for selectively detecting Fe3+, nitrobenzene, and ascorbic acid in aqueous solutions through fluorescence quenching with low limits of detection (LODs ∼ 10-7 M) and high quenching constants (Ksv ∼ 103 M-1). Moreover, the detection mechanism of complex 2 was further investigated by using experimental methods and DFT calculations.

Synthesis of High-Fluorescent Diphenyl-anthracene Derivatives and Application in Detection of Nitroaromatic Explosives and Fingerprint Identification

The development of high-intensity fluorescent materials is always the focuses and forefront projects because of their important applications in displays, sensing and detection fields. In recent years, the detection of explosives has attracted increasing attention due to security and counterterrorism issues. Herein, two diphenyl-anthracene (DPA) derivatives were designed and synthesized by introducing strong electron withdrawing fluorine atoms and cyano-groups to DPA, which exhibited strong fluorescence both in the solution and solid phase with the absolute quantum yields up to 70.4 % and 45.9 % respectively. The detection behavior of nitroaromatic explosives such as picric acid (PA), 2,4,6-trinitrotoluene (TNT) and 3-Nitropropionic acid (3-NP) also shows good sensitivity with the quenching constant as high as 6.3×104  L mol-1 . Theoretical calculation demonstrates that the fluorescence quenching behavior of the two DPA derivatives is caused by the behavior of photoinduced electron transfer (PET) and the resonance energy transfer (RET) studies explained the higher sensitivity and selectivity of both compounds towards PA than other nitro-containing explosives. Furthermore, the strong solid-state fluorescence of the DPA derivatives also shows excellent advantages in enhancing latent fingerprint recognition.

Pt(II) Tetrafacial Barrel with Aggregation-Induced Emission for Sensing

A new tetraphenylpyrazine-based tetraimidazole ligand (L) was synthesized and used for subcomponent self-assembly with cis-(tmeda)Pd(NO3)2 and cis-Pt(PEt3)2(OTf)2, leading to the formation of two tetrafacial barrels [Pd8L4(tmeda)8](NO3)16 (1) and [Pt8L4(PEt3)16](OTf)16 (2), respectively. Although ligand L is aggregation-induced emission (AIE) active, barrel 2 showed a magnificently higher AIE activity than ligand L, while 1 failed to retain the AIE properties of the ligand. Pd(II) barrel 1, undergoing an aggregation-caused quenching (ACQ) phenomenon, nullified the AIE activity of the ligand to be used in the photophysical application. The enhanced emission in the aggregated state of Pt(II) barrel 2 was used for the recognition of picric acid (PA), which is explosive in nature and one of the groundwater contaminants in landmine areas. The recognition of picric acid was found to be selective in comparison with that of other nitroaromatic compounds (NACs), which could be attributed to ground-state complex formation and resonance energy transfer between picric acid and barrel 2. The use of new AIE-active assembly 2 for selective detection of PA with a low detection limit is noteworthy.

Facile construction of an anthracene-decorated highly luminescent coordination polymer for the selective detection of explosive nitroaromatics and the mutagenic pollutant TNP

Explosive nitroaromatic compounds (epNACs) are a group of chemicals that have caused significant human casualties through terrorist attacks and they also pose health risks. For the benefit of homeland security and environmental health, there is room for advancing research on the precise detection of epNACs. Coordination polymers (CPs) successfully serve this purpose because of their binding abilities and quenching capabilities. In this regard, a one-dimensional (1D) CP [Zn(bdc)(avp)2(H2O)]n (1; H2bdc = 1,4-benzenedicarboxylic acid and avp = 4-[2-(9-anthryl)vinyl]pyridine) was synthesized, which remarkably demonstrated extremely efficient ratiometric and selective sensing capacity toward epNACs and the mutagenic pollutant 2,4,6-trinitrophenol (TNP) with a quick response. Density functional theory (DFT) calculations provided a thorough analysis of the mechanistic routes behind the quenching reaction. Herein, geometrically accessible interaction sites were strategically decorated using anthracene moieties, allowing the quick and precise detection of explosive nitro derivatives and the carcinogenic pollutant TNP with increased sensitivity.

Deep Learning-Assisted Intelligent Artificial Vision Platform Based on Dual-Luminescence Eu(III)-Functionalized HOF for the Diagnosis of Breast and Ovarian Cancer

Developing an advanced analytical method to detect spermine (Spm) and N-acetylneuraminic acid (NANA), the biomarkers of breast and ovarian cancers, respectively, is critical for the early diagnosis of the two cancers, which is very meaningful for women's health. Here, a deep learning-assisted artificial vision platform based on a dual-emission ratiometric fluorescence sensor is first constructed to monitor Spm and NANA. The ratiometric fluorescence sensor (Eu@TCBP-HOF, 1) can selectively detect Spm with high sensitivity based on "Turn-on" mode. After adding Spm, the new ratiometric fluorescence sensor (1-Spm, named 2) shows high sensitivity for NANA with "Turn-off" mode. Moreover, the fluorescence sensors can achieve an obvious fluorescence color response to Spm and NANA. Even in real saliva and serum samples, 1 and 2 still show high sensitivity and color responsiveness with limit of detection (LODs) of 0.5 μM for Spm and 0.96 μM for NANA. In virtue of different fluorescence responses, the DenseNet algorithm of deep learning assists the fluorescence sensors, which can simulate the human visual systems to identify fluorescence images and distinguish the concentration of Spm and NANA within 1 s with over 99% recognition accuracy. The intelligent artificial vision platform developed in this work may provide a prospective analytical method for the early diagnosis of female malignant tumors.

Quantum dots: a tool for the detection of explosives/nitro derivatives

Nitro derivatives are considered as major environmental pollutants and issues of health concern. In current times, a variety of methods and techniques have been utilized for the sensing of these nitro derivatives. In view of this, the remarkable fluorescence properties of quantum dots (QDs) provide a great opportunity to detect these nitro derivatives. This review highlighted the recent reports of QDs as the sensing material for these nitro derivative explosives. Different modifications in QDs using physical and chemical approaches can be used to improve their sensing output. Various interaction mechanisms have been discussed between QDs and nitro derivatives to change their fluorescence properties. Finally, the current challenges and the perspective for the forthcoming future are provided in the concluding section. We hope this review will be beneficial in guiding the utilization of QDs in sensing applications.

Fluorescence Quenching and the Chamber of Nitroaromatics: A Dinaphthoylated Oxacalix[4]arene's (DNOC) Adventure Captured through Computational and Experimental Study

This research presents the application of Dinaphthoylated Oxacalix[4]arene (DNOC) as a novel fluorescent receptor for the purpose of selectively detecting nitroaromatic compounds (NACs). The characterization of DNOC was conducted through the utilization of spectroscopic methods, including 1H-NMR, 13C-NMR, and ESI-MS. The receptor demonstrated significant selectivity in acetonitrile towards several nitroaromatic analytes, such as MNA, 2,4-DNT, 2,3-DNT, 1,3-DNB, 2,6-DNT, and 4-NT. This selectivity was validated by the measurement of emission spectra. The present study focuses on the examination of binding constants, employing Stern-Volmer analysis, as well as the determination of the lowest detection limit (3σ/Slope) and fluorescence quenching. These investigations aim to provide insights into the inclusion behavior of DNOC with each of the six analytes under fluorescence spectra investigation. Furthermore, the selectivity trend of the ligand DNOC for NAC detection is elucidated using Density Functional Theory (DFT) calculations conducted using the Gaussian 09 software. The examination of energy gaps existing between molecular orbitals, namely the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO), provides a valuable understanding of electron-transfer processes and electronic interactions. Smaller energy gaps are indicative of heightened selectivity resulting from favorable electron-transfer processes, whereas bigger gaps suggest less selectivity attributable to weaker electronic contacts. This work integrates experimental and computational methodologies to provide a full understanding of the selective binding behavior of DNOC. As a result, DNOC emerges as a viable chemical sensor for detecting nitroaromatic explosives.

Differentiating Between V- and G-Series Nerve Agent and Simulant Vapours Using Fluorescent Film Responses

In-field rapid and reliable identification of nerve agents is critical for the protection of Defence and National Security personnel as well as communities. Fluorescence-based detectors can be portable and provide rapid detection of chemical threats. However, most current approaches cannot differentiate between dilute vapors of nerve agent classes and are susceptible to false positives due to the presence of common acids. Here a fluorescence-based method is shown for rapid differentiation between the V-series and phosphonofluoridate G-series nerve agents and avoids false positives due to common acids. Differentiation is achieved through harnessing two different mechanisms. Detection of the V-series is achieved using photoinduced hole transfer whereby the fluorescence of the sensing material is quenched in the presence of the V-series agent. The G-series is detected using a turn-on mechanism in which a silylated excited state intramolecular proton transfer sensing molecule is selectively deprotected by hydrogen fluoride, which is typically found as a contaminant and/or breakdown product in G-series agents such as sarin. The strategy provided discrimination between classes, as the sensor for the G-series agent class is insensitive to the V-series agent, and vice versa, and neither responded to common acids.

An overview of polymer surface coated synthetic quantum dots as therapeutics and sensors applications

Quantum dots (QDs) are a class of remarkable materials that have garnered significant attention since their initial discovery. It is noteworthy to mention that it took approximately a decade for these materials to be successfully implemented in practical applications. While QDs have demonstrated notable optical properties, it is important to note that these attributes alone have not rendered them a feasible substitute for traditional organic dyes. Furthermore, it is worth noting that the substance under investigation exhibited inherent toxicity and instability in its initial state, primarily due to the presence of a heavy metal core. In the initial stages of research, it was observed that the integration of nanocomposites had a positive impact on the properties of QDs. The discovery of these nanocomposites was motivated by the remarkable properties exhibited by biocomposites found in nature. Recent discoveries have shed light on the potential utilization of QDs as a viable strategy for drug delivery, offering a promising avenue to enhance the efficacy of current pharmaceuticals and pave the way for the creation of innovative therapeutic approaches. The primary objective of this review was to elucidate the distinctive characteristics that render QDs highly suitable for utilization as nanocarriers. In this study, we will delve into the multifaceted applications of QDs as sensing nanoprobes and their utilization in diverse drug delivery systems. The focus of our investigation was directed toward the utilization of QD/polymer composites in sensing applications, with particular emphasis on their potential as chemical sensors, biosensors, and physical sensors.

Lignocellulosic Biomass-Based Carbon Dots: Synthesis Processes, Properties, and Applications

Carbon dots (CDs), a new type of carbon-based fluorescent nanomaterial, have attracted widespread attention because of their numerous excellent properties. Lignocellulosic biomass is the most abundant renewable natural resource and possesses broad potential to manufacture different composite and smart materials. Numerous studies have explored the potential of using the components (such as cellulose, hemicellulose, and lignin) in lignocellulosic biomass to produce CDs. There are few papers systemically aiming in the review of the state-of-the-art works related to lignocellulosic biomass-derived CDs. In this review, the significant advances in synthesis processes, formation mechanisms, structural characteristics, optical properties, and applications of lignocellulosic biomass-based CDs such as cellulose-based CDs, hemicellulose-based CDs and lignin-based CDs in latest research are reviewed. In addition, future research directions on the improvement of the synthesis technology of CDs using lignocellulosic biomass as raw materials to enhance the properties of CDs are proposed. This review will serve as a road map for scientists engaged in research and exploring more applications of CDs in different science fields to achieve the highest material performance goals of CDs.

One-dimensional coordinated polymers of tetraphenylethene pyridine and copper-iodide for fluorescence detection of nitroaromatic explosives

The spatial arrangement of molecules plays a crucial role in determining the macroscopic properties of functional materials. Coordinated polymers (CPs) formed by self-assembly of organic isomeric ligands and metals offer unique performance characteristics. In this study, we present the investigation of a one-dimensional CP, named CIT-E, composed of tetraphenylethene pyridine derivative (TPE-2by-2-E) ligands and copper iodide. The resulting CP exhibits a one-dimensional bead chain structure with exceptional thermal and chemical stability. By leveraging the competitive absorption between CIT-E and the explosive analog 2,4-dinitroaniline, we achieve detection of the explosive through changes in the absorption intensity of the excitation light source and subsequent fluorescence response. The CP demonstrates high selectivity and anti-interference ability in detecting 2,4-dinitroaniline in aqueous solution, with a detection linear range of 0.1 to 300 μM and a detection limit of 0.05 μM, surpassing the national third-level emission standard. These findings highlight the potential of CP CIT-E as a promising material for the detection of explosive nitroaromatic compounds.

In Situ Oxidation of Pyridyl-Dihydrobenzoimidazoquinazoline and the Synthesis of a Highly Luminescent Cd(II) Coordination Polymer: A Promising Candidate for Mutagenic Nitroaromatic Detection and Device Fabrication

Pyridyl-substituted imidazoquinoline, a potent fluorescent framework, is advantageous to architect multifunctional coordination networks for sensing and fabricating emergent electrical conductors. In this work, a Cd(II)-based one-dimensional (1D) coordination polymer (1D CP), [Cd(glu)2(pbiq)2(H2O)]n (1), [H2glu = glutaric acid and pbiq = 4-(6-(pyridin-4-yl)benzo[4,5]imidazo[1,2-c]quinazoline)], has been structurally confirmed by single-crystal X-ray crystallography. The H-bonding and π···π interactions built a three-dimensional (3D) supramolecular structure that strongly emits at 416 nm in acetonitrile suspension. Potentially intrusive nitroaromatics (NAs) and trinitrophenol (TNP) selectively quench the strong emission of 1, and the highest quenching is noted in the case of TNP. A detection limit (limit of detection (LOD)) of 1.51 × 10-7 M for TNP is determined. The band gap (3.31 eV) of 1 recognizes semiconducting behavior, and an electronic device is fabricated. The correlation of current vs voltage (I-V plot) reveals a substantial non-ohmic electrical conductivity of 1 (Λ: 1.10 × 10-5 S m-1) along with a low energy barrier (ΦB: 0.69), and the series resistance (Rs) becomes 6.21 kΩ.

(1-(4-(5-Phenyl-1,3,4-oxadiazol-2-yl)phenyl)-1H-1,2,3-triazol-4-yl)-methylenyls α,ω-Bisfunctionalized 3- and 4-PEG: Synthesis and Photophysical Studies

Two new azaheterocycle-based bolas, such as (1-(4-(5-phenyl-1,3,4-oxadiazol-2-yl)phenyl)-1H-1,2,3-triazol-4-yl)-methylenyls α,ω-bisfunctionalized PEGs, were prepared via Cu-catalyzed click reaction between 2-(4-azidophenyl)-5-(aryl)-oxadiazole-1,3,4 and terminal ethynyls derived from PEG-3 and PEG-4. Due to the presence of two heteroaromatic cores and a PEG linker, these bola molecules are considered as promising fluorescent chemosensors for electron-deficient species. As a result of a well-pronounced "turn-off" fluorescence response towards common nitro-explosive components, such as 2,4-dinitrotoluene (DNT) and 2,4,6-trinitrotoluene (TNT), hard-to-detect pentaerythritol tetranitrate (PETN), as well as Hg²⁺ cation was observed.

Two anthracene-based zirconium metal-organic frameworks with fcu and hcp topologies as versatile fluorescent sensors for detection of inorganic ions and nitroaromatics

Two anthracene-based zirconium metal-organic frameworks (UiO-68-AN-fcu and UiO-68-AN-hcp) with blue emission were synthesized by the solvothermal reaction of ZrCl₄ with anthracene-based ligand 4,4'-(9,10-anthracenediyl)dibenzoic acid. The two MOFs inherited the luminescence properties of anthracene-based ligand and exhibited different topologies due to the change of connection mode of Zr-O clusters. The two stable anthracene-based zirconium MOFs served as luminescent sensors for selectively detecting 2-nitrophenol, Fe³⁺ and Cr₂O₇^2-. UiO-68-AN-hcp with flower morphology exhibited stronger quenching effect for 2-nitrophenol, Fe³⁺ and Cr₂O₇^2- by comparing to UiO-68-AN-fcu. Adsorption tests, fluorescence lifetime and spectroscopy studies demonstrated that the fluorescence responses of MOFs for analytes can be primarily attributed to the dynamic quenching mechanism involving energy and electron transfer. These results revealed that the combination of luminescent anthracene-based ligand and Zr-O clusters is a feasible strategy to construst MOFs-based fluorescent sensors.

Chemical reduction as a facile colorimetric approach for selective TNT detection by spectrophotometry and photothermal lens spectroscopy

In this study, the simple determination of TNT is achieved through the vivid stable red color products generated after chemically reduction by NaBH₄ as a common and accessible reducing/colorimetric reagent. Some other nitroaromatics were impressed under reduction reaction and led to the colorful products. The color of these reduced nitroaromatics were unstable and approximately vanished after some few minutes which ameliorated the selectivity in TNT determination. Utilizing the time-dependent selectivity, the method was applied specifically for discriminating of TNT from other nitroaromatic compounds (NACs). UV-vis spectrophotometry and photothermal lens spectrometry were employed as detection techniques. The former was simpler and more available in various laboratories while the latter provides higher sensitivity. It was revealed that the photothermal lens responses were linear from 2.0 to 55.0 nM with a limit of detection (LOD) of about 0.8 nM. The LOD of the photothermal lens measurement were found to be 241 times lower than that of the UV-vis spectrophotometry in TNT quantification. The evolved method was successfully carried out for TNT vapor determination after trapping into the colorimetric reagent. The recoveries and relative standard deviations (RSD, n = 3) calculated for 3 gas samples were ≥91% and ≤7%, respectively.

Controllable Synthesis of TbIII Metal-Organic Frameworks with Reversible Luminescence Sensing for Benzaldehyde Vapor

Two novel lanthanide metal-organic frameworks (MOFs) with the formulas [Tb(bidc)(Hbidc)(H₂O)]_n (JXUST-20) and {[Tb₃(bidc)₄(HCOO)(DMF)]·solvents}_n (JXUST-21) were synthesized based on 2,1,3-benzothiadiazole-4,7-dicarboxylic acid (H₂BTDC) under solvothermal conditions. Interestingly, benzimidazole-4,7-dicarboxylic acid (H₂bidc) was formed in situ using H₂BTDC as the starting material. The self-assembly process of the targeted MOFs with different topological structures can be controlled by the solvents and concentration of the reactants. Luminescence experiments show that JXUST-20 and JXUST-21 exhibit strong yellow-green emission. JXUST-20 and JXUST-21 can selectively sense benzaldehyde (BzH) via a luminescence quenching effect with detection limits of 15.3 and 1.44 ppm, respectively. In order to expand the practical application of MOF materials, mixed-matrix membranes (MMMs) have been constructed by mixing targeted MOFs and poly(methyl methacrylate) in a N,N-dimethylformamide (DMF) solution, which can also be used for BzH vapor sensing. Therefore, the first case of MMMs derived from Tb^III MOFs has been developed for the reversible detection of BzH vapor, providing a simple and efficient platform for the future detection of volatile organic compounds.

A "heat set" Zr-Diimide based Fibrous Metallogel: Multiresponsive Sensor, Column-based Dye Separation, and Iodine Sequestration

Sensing and monitoring hazardous contaminants in water and radioactive iodine sequestration is pivotal due to their detrimental impact on biological ecosystems. In this context, herein, a water stable zirconium-diimide based metallogel (Zr@MG) with fibrous columnar morphology is accomplished through the "heat set" method. The presence of diimide linkage with long aromatic chain manifests active luminescence properties in the linker as well as in the supramolecular framework structure. The as-synthesized Zr@MG xerogel can selectively detectCr₂O₇^2- (LOD = 0.52 ppm) and 2,4,6-trinitrophenol (TNP) (LOD = 80.2 ppb) in the aqueous medium. The Zr@MG paper strip-based detection for Cr₂O₇^2- and nitro explosive makes this metallogel reliable and an attractive luminescent sensor for practical use. Moreover, a column-based dye separation experiment was performed to show selective capture of positively charged methylene blue (MB) dye with 98 % separation efficiency from the mixture of two dyes. Also, the Zr@MG xerogel showed effective iodine sequestration from the vapor phase (232 wt%).

Preparation of a Tetra-Imidazolium Salt and Sensing for p-Dinitrobenzene

A macrocyclic tetra-imidazolium salt (2) based on quinoxaline was prepared and characterized. The recognition of 2 to nitro compounds was investigated by fluorescence spectroscopy, ¹H NMR titrations, MS, IR spectroscopy, and UV/vis spectroscopy. The results displayed that 2 was able to effectively differentiate p-dinitrobenzene from other nitro compounds via the fluorescence method.

Aggregation-induced emission enhancement (AIEE) of tetrarhenium(I) metallacycles and their application as luminescent sensors for nitroaromatics and antibiotics

The self-assembly of tetrarhenium metallacycles [{Re(CO)₃}₂(μ-dhaq)(μ-N-N)]₂ (3a, N-N = 1,3-bis(1-butylbenzimidazol-2-yl)benzene; 3b, N-N = 1,3-bis(1-octylbenzimidazol-2-yl)benzene), (H₂-dhaq = 1,4-dihydroxy-9,10-anthraquinone) and [{Re(CO)₃}₂(μ-thaq)(μ-N-N)]₂ (4, N-N = 1,3-bis(1-butylbenzimidazol-2-yl)benzene), (H₂-thaq = 1,2,4-trihydroxy-9,10-anthraquinone) under solvothermal conditions is described. The metallacycles 3a,b and 4 underwent aggregation-induced emission enhancement (AIEE) in THF upon the incremental addition of water. TEM images revealed that metallacycle 3a in a 60% aqueous THF solution formed rectangular aggregates with a wide size distribution, while a 90% aqueous THF solution resulted in the formation of a mixture of nanorods and amorphous aggregates due to rapid and abrupt aggregation. UV-vis and emission spectral profiles supported the formation of nanoaggregates of metallacycles 3a,b and 4 upon the gradual addition of water to a THF solution containing metallacycles. Further studies indicated that these nanoaggregates were excellent probes for the sensitive and selective detection of nitro group containing picric acid (PA) derivatives as well as antibiotics.

Pyrene, Anthracene, and Naphthalene-Based Azomethines for Fluorimetric Sensing of Nitroaromatic Compounds

Special attention is given to the development of rapid and sensitive detection of nitroaromatic explosives for homeland security and environmental concerns. As part of our contribution to the detection of nitroaromatic explosives, fluorescent materials (A), (B) and (C) were synthesized from the reaction of 1,2-diaminocyclohexane with pyrene-1-carbaldehyde, anthracene-9-carbaldehyde and 2-hydroxy-1-naphthaldehyde, respectively. The structures of the prepared fluorescent azomethine probes were confirmed using FTIR, ¹H-NMR and ¹³C-NMR spectroscopies. The basis of the study is the use of the synthesized materials as fluorescent probes in the photophysical and fluorescence detection of some nitroaromatic explosives. Emission increases occurred due to aggregation caused by π-π stacking in synthesized azomethines. To measure the nitroaromatic detection capabilities of fluorescence probes, fluorescence titration experiments were performed using the photoluminescence spectroscopy. It was observed that compound A containing pyrene ring provided the best emission intensity-increasing effect due to aggregation with the lowest LOD value (14.96 μM) for the sensing of 4-nitrophenol. In compounds B and C, nitrobenzene with the lowest LOD (16.15 μM and 23.49 μM respectively) caused the most regular emission increase, followed by picric acid.

Fully Flexible Covalent Organic Frameworks for Fluorescence Sensing 2,4,6-Trinitrophenol and p-Nitrophenol

Nitrophenols are important nitroaromatic compounds, both important environmental pollutants and dangerous explosives, posing a devastating danger and pollution threat to humans. It is vital to detect efficiently trace nitrophenols in the environment. In this contribution, a series of fully flexible cyclotriphosphazene-based COFs (FFCP COFs: HDADE, HBAPB, and HBPDA), prepared with both a flexible knot and flexible linkers of different lengths, were used for sensing 2,4,6-trinitrophenol (TNP) and p-nitrophenol (p-NP) in real time with excellent sensitivity and selectivity. The quenching constants of HDADE by TNP, HBAPB, and HBPDA by p-NP are 6.29 × 10⁴, 2.17 × 10⁵, and 2.48 × 10⁵ L·mol^-1, respectively. The LODs of TNP and p-NP are 1.19 × 10^-11, 6.91 × 10^-12, and 6.05 × 10^-12 mol·L^-1. Their sensitivities increase with the linker length, which is better than the corresponding COFs composed of rigid linkers. There is only a photoinduced electron transfer mechanism in the fluorescence quenching of HBPDA by p-NP. Meanwhile, the mechanisms of photoinduced charge transfer and resonance energy transfer exist in the fluorescence quenching of HDADE by TNP and the fluorescence quenching of HBAPB by p-NP.

Selective Low-Level Detection of a Perilous Nitroaromatic Compound Using Tailor-Made Cd(II)-Based Coordination Polymers: Study of Photophysical Properties and Effect of Functional Groups

Three coordination polymers (CPs 1-3) are prepared based on diverse electron-donating properties and coordination arrangements of conjugated ligands. Interestingly, this is also reflected in their photophysical properties. The distinguishable high emissive nature of the luminescent coordination polymer shows its potentiality toward the detection of the perilous substance 2,4,6-trinitrophenol (TNP) or picric acid (PA). TNP has a higher propensity among explosive nitroaromatic compounds (epNACs) due to its significant π···π interaction with the free benzene moieties present in the CPs. Among CPs 1-3, 2 exhibits the highest sensitivity and selectivity toward TNP because of the most favorable π-π stacking with the conjugated organic linker. The calculated limit of detection (LOD) and corresponding quenching constant (K_SV) from the Stern-Volmer (SV) plot for 1, 2, and 3 are found to be 0.68 μM and 7.49 × 10⁴ M^-1, 0.41 μM and 8.01 × 10⁴ M^-1, and 1.18 μM and 8.1 × 10⁴ M^-1, respectively. The fluorescence quenching mechanism is also highly influenced by their structure and coordination arrangement.

Luminescent Cd coordination polymer based on thiazole as a dual-responsive chemosensor for 4-nitroaniline and CrO42- in water

A novel highly fluorescent cadmium metal-organic framework, [Cd (DPTTZ) (OBA)] (IUST-3), synthesized by using two linkers 2, 5-di (pyridine-4-yl) thiazolo [5, 4-d] thiazole (DPTTZ) and 4, 4'-oxybis (benzoic acid) (OBA) simultaneously, which exhibits a two-dimensional framework. The characteristics of this Cd-MOF were investigated by single-crystal X-ray diffraction, Fourier transform infrared spectroscopy, elemental analysis, powder X-ray diffraction, and thermogravimetry analysis. The IUST-3 exhibits excellent luminescence property and good stability in water. Luminescent experiments indicate that the IUST-3 has remarkable sensitivity and selectivity for the detection of 4-nitroaniline (4-NA), and CrO₄^2- anion with K_SV = 1.03 × 10⁵ M^-1 (4-NA) and K_SV = 2.93 × 10⁴ M^-1 (CrO₄^2-) and low limit of detection 0.52 µM (4-NA) and 1.37 µM (CrO₄^2-). In addition, the possible fluorescence quenching mechanism was explored in this paper.

Tuning solvent-solute interactions enable visual colorimetric detection of nitro-aromatic explosives

The Janowski reaction is a critical reaction for visual colorimetric detection of nitro-aromatic explosives. However, the solvent effect is still not well explored. Herein, we report the solvent-dependent activity of the Janowski reaction between 2,4-dinitrotoluene (DNT)/2,4,6-trinitrotoluene (TNT) and NaOH. Four common solvents are studied. It is found that acetone with high donor number and low polarity is able to readily dissolve the product of Janowski reaction (Meisenheimer complexes) via Lewis acid-base interactions and solvation rules, facilitating the Janowski reactions between DNT/TNT and NaOH. Based on the color change of the Janowski reactions within acetone, a visual colorimetric assay is established. The present assay can detect DNT and TNT with a detection limit of 1.4 μM and 1.2 μM, which allows for naked-eye detection. In addition, this assay is highly selective and applicable to DNT/TNT detection in soil samples. Our work reveals the solvent effect on the Janowski reaction, providing a simple and rapid method for detection of nitro-aromatic explosives.

A Highly Efficient Fluorescent Sensor Based on AIEgen for Detection of Nitrophenolic Explosives

The detection of nitrophenolic explosives is important in counterterrorism and environmental protection, but it is still a challenge to identify the nitroaromatic compounds among those with a similar structure. Herein, a simple tetraphenylethene (TPE) derivative with aggregation-induced emission (AIE) characteristics was synthesized and used as a fluorescent sensor for the detection of nitrophenolic explosives (2, 4, 6-trinitrophenol, TNP and 2, 4-dinitrophenol, DNP) in water solution and in a solid state with a high selectivity. Meanwhile, it was found that only hydroxyl containing nitrophenolic explosives caused obvious fluorescence quenching. The sensing mechanism was investigated by using fluorescence titration and ¹H NMR spectra. This simple AIE-active probe can potentially be applied to the construction of portable detection devices for explosives.

Study on the Electrochemiluminescence of Pentaphenylpyrrole in the Aqueous Phase Based on Structure-Regulated Strategy

Heterocyclic nitrogen compounds play a vital role in luminescent materials, but most of them face the challenges of aggregation-caused quenching (ACQ) and poor water solubility. In this work, we present the nitrogen heterocyclic pentaphenylpyrrole (PentaPP) with an excellent aggregation-induced electrochemiluminescence (AIE-ECL) performance in the aqueous phase through the comparison of the elegant ECL luminophore 5,10,15,20-tetraphenylporphyrin (TPP). Further studies suggest that such unique AIE-ECL arises from its propeller-like noncoplanar structure and the large conjugation from the phenyl groups on the ring. In addition, the new ECL analysis could feature some advantages of AIE characteristic, water compatibility, and strong signal and finally achieve the ultrasensitive detection toward the explosive 2,4,6-trinitrophenol (TNP) with a lower detection limit (1.1 nM). This study does not only benefit to solve the two key problems mentioned before but also enriches the fundamentals and applications for ECL and pyrrole research.

Polyethyleneimine-capped copper nanoclusters for detection and discrimination of 2,4,6-trinitrotoluene and 2,4,6-trinitrophenol

The detection and discrimination of 2,4,6-trinitrotoluene (TNT) and 2,4,6-trinitrophenol (TNP) from analogues are of great importance to global security and are full of challenges in the field of trace sensing. Here, benefitting from the strong electrophilicity of TNT, a sensing strategy is established by synthesizing polyethyleneimine capped copper nanoclusters (PEI-Cu NCs) with abundant -NH₂ groups. By carefully controlling the size and structure of PEI-Cu NCs, Förster resonance energy transfer (FRET) from PEI-Cu NCs to the Meisenheimer complex occurs resulting from their spectral overlap when detecting TNT, while, due to the energy level match of TNP with PEI-Cu NCs, as well as the strong affinity between its -OH and -NH₂ in PEI-Cu NCs, photo-induced electron transfer (PET) is feasibly expected. As a result, TNT and TNP could be detected from 26 types of analogues and cations with a limit of detection (LOD) of 26.57 and 12.82 nM, respectively. Besides, owing to the brown color of the Meisenheimer complex, the discrimination of TNT and TNP could be additionally realized by colorimetric detection. We expect that the proposed methodology would not only shine light on the detection and discrimination of TNT and TNP that mitigate against public security concerns, but also pave a way for the deep understanding of FRET and PET related fluorescence quenching mechanisms from the aspect of controllable sensing material design and synthesis.

Dual-Ligand Strategy Employing Rigid 2,5-Thiophenedicarboxylate and 1,10-Phenanthroline as Coligands for Solvothermal Synthesis of Eight Lanthanide(III) Coordination Polymers: Structural Diversity, DFT Study, and Exploration of the Luminescent Tb(III) Coordination Polymer as an Efficient Chemical Sensor for Nitroaromatic Compounds

Lanthanide coordination polymers (Ln-CPs) are potential chemosensors when fabricated to depict a detectable change in optical properties on interaction with target analytes. This work investigates the interaction of nitroaromatic compounds with Ln-CPs leading to induced changes in fluorescence emission intensity, a crucial strategy to develop a selective and sensitive system for the sensing of nitroaromatics. Approaching toward this objective, solvothermal reactions of 2,5-thiophenedicarboxylic (2,5-TDC) acid, 1,10-phenanthroline (1,10-Phen), and Ln(NO₃)₃·xH₂O are carried out to assemble eight Ln(III) coordination polymers [Ln₂(2,5-TDC)₃(1,10-Phen)₂(H₂O)₂] [Ln = Pr (1), Nd (2)], {[Tb(2,5-TDC)_1.5(1,10-Phen)(H₂O)]·DMF} (3), and [Ln(2,5-TDC)_1.5(1,10-Phen)]·xH₂O (Ln = Tb (4), Dy (5), Ho (6), Er (7), and Yb (8)); x = 0 for CP 4, 5, 6, and 8 and x = 1 for CP 7 with two different space groups and dimensions. The as-synthesized polymers 1-8 are characterized by powder X-ray crystallography, infrared spectroscopy, and thermogravimetric analysis. The structure-corroborated density functional theory (DFT) studies are done on the selected CPs to investigate the interactions between different structural motifs of the assembled CPs. The luminescence properties of CP 4 are explored in detail and are found to be highly sensitive for the detection of p-nitrotoluene as indicated by the most intensive fluorescence quenching with the lowest limit of detection (0.88 ppm) and high quenching constant (4.3 × 10⁴ M^-1). Other nitro compounds (viz., o-nitrobenzaldehyde, m-nitroaniline, picric acid, m-dinitrobenzene, p-nitrophenol, and p-nitroaniline) are also screened for potential sensing by CP 4.

Random Copolymers of Styrene with Pendant Fluorophore Moieties: Synthesis and Applications as Fluorescence Sensors for Nitroaromatics

Five random copolymers comprising styrene and styrene with pendant fluorophore moieties, namely pyrene, naphthalene, phenanthrene, and triphenylamine, in molar ratios of 10:1, were synthesized and employed as fluorescent sensors. Their photophysical properties were investigated using absorption and emission spectral analyses in dichloromethane solution and in solid state. All copolymers possessed relative quantum yields up to 0.3 in solution and absolute quantum yields up to 0.93 in solid state, depending on their fluorophore components. Fluorescence studies showed that the emission of these copolymers is highly sensitive towards various nitroaromatic compounds, both in solution and in the vapor phase. The detection limits of these fluorophores for nitroaromatic compounds in dichloromethane solution proved to be in the range of 10−6 to 10−7 mol/L. The sensor materials for new hand-made sniffers based on these fluorophores were prepared by electrospinning and applied for the reliable detection of nitrobenzene vapors at 1 ppm in less than 5 min.