Mellitic Acid-Supported Synthesis of Anisotropic Nanoparticles Used as SERS Substrate

A method for the synthesis of a new SERS substrate-anisotropic silver nanoparticles using mellitic acid as a new capping agent is presented. The synthesis is free of toxic substances and does not require special temperature or lighting conditions. Moreover, it is fast, easy, and inexpensive. Depending on the concentration of silver ions and nanoparticle seeds, four different colloids were obtained, representing the evolution of nanoparticle growth along different paths from the first common stage. One of the synthesized colloids consists mainly of triangular nanoplates, while the other consists of polyhedral NPs. The analysis of the synthesis process together with the observation of TEM images and UV-vis extinction spectra enabled the proposal of the mechanism of interaction of mellitic acid molecules as the capping agent. The ability of mellitic acid molecules to form a hydrogen bond network, together with a ratio of silver ions to the mellitic acid concentration, turned out to be crucial for determining the shape of the NPs. All obtained colloids strongly enhance the Raman spectra of analyte molecules, thus proving their applicability as efficient new SERS substrates. For the one that enhanced the spectra the most, the detection limit was set at 10-9 M. Using it as a SERS substrate enables the identification of a trace amount of a designer drug, i.e., 4-chloromethcathinone (4-CMC, clephedrone). For the first time, SERS spectra of this substance, illegal in many countries, are presented.

Assembly of Gold Nanostar Cores Within Silica Shells and Its Impact on Solid-State SERS and Nonenzymatic Catalytic Sensing

Metal core and dielectric shell nanoparticles (NPs) have garnered considerable attention for their multifaceted properties and extensive applications across diverse fields of nanoscience and nanotechnology. However, a literature gap exists regarding the impact of assembled metallic nanostar cores within a single shell, particularly concerning surface-enhanced Raman scattering (SERS) and electrochemical sensing. In this study, we have demonstrated the better performance of assemblies of gold nanostars (AuNSs) enclosed in single silica shell for SERS enhancement and electrocatalytic activity, particularly in the fields of ascorbic acid (AA) and glucose sensing. We have devised a method to isolate and passivate nanostar assemblies, ranging from 2 to 30 nanostars per assembly, with a functionalized silica (SiO2) shell, facilitating their preservation. The engineered thickness of the silica shell ensures unhindered optical measurements while elucidating the influence of multiple AuNS cores. Due to the formation of nanogaps and nanojunctions between AuNSs within assembly, we have achieved a maximum SERS enhancement factor (EF) of 1.416 × 1010 for the rhodamine 6G analyte. Utilizing assembled AuNS cores within a single silica shell, we have demonstrated AA (sensitivity of 5.278 × 10-5 μA μM-1 cm-2) and glucose (sensitivity of 7.519 × 10-4 μA μM-1 cm-2) sensing via a nonenzymatic electrochemical pathway.

Tecoma stans Floral Extract-Based Biosynthesis for Enhanced Surface Plasmon-Coupled Emission and a Preliminary Study on Fluoroimmunoassay

We demonstrate the synthesis of biogenic supported silver spiked star architectures and their application to increase the electromagnetic field intensity at its tips that enhance plasmon-coupled emission. Tecoma stans floral extract has been used to synthesize silver nanocubes and spiked stars. We observe ∼445-fold and ∼680-fold enhancements in spacer and cavity configurations, respectively, in the SPCE platform. The hotspot intensity and Purcell factor are evaluated by carrying out finite-difference time-domain (FDTD) simulations. Time-based studies are presented to modulate the sharpness of the edges wherein an increase in the tip sharpness with the increase in reaction time up to 5 h is observed. The unique morphology of the silver architectures allowed us to utilize them in biosensing application. A SPCE-based fluoroimmunoassay was performed, achieving a 1.9 pg/mL limit of detection of TNF-α cytokine. This combination of anisotropic architectures, SPCE and immunoassay prove to be a powerful platform for the ultrasensitive detection of biomarkers in surface-bound assays.

Advances in photothermal regulation strategies: from efficient solar heating to daytime passive cooling

Photothermal regulation concerning solar harvesting and repelling has recently attracted significant interest due to the fast-growing research focus in the areas of solar heating for evaporation, photocatalysis, motion, and electricity generation, as well as passive cooling for cooling textiles and smart buildings. The parallel development of photothermal regulation strategies through both material and system designs has further improved the overall solar utilization efficiency for heating/cooling. In this review, we will review the latest progress in photothermal regulation, including solar heating and passive cooling, and their manipulating strategies. The underlying mechanisms and criteria of highly efficient photothermal regulation in terms of optical absorption/reflection, thermal conversion, transfer, and emission properties corresponding to the extensive catalog of nanostructured materials are discussed. The rational material and structural designs with spectral selectivity for improving the photothermal regulation performance are then highlighted. We finally present the recent significant developments of applications of photothermal regulation in clean energy and environmental areas and give a brief perspective on the current challenges and future development of controlled solar energy utilization.

The Impact of Silver Nanoparticle-Induced Photothermal Therapy and Its Augmentation of Hyperthermia on Breast Cancer Cells Harboring Intracellular Bacteria

Breast cancer can harbor intracellular bacteria, which may have an impact on metastasis and therapeutic responses. Silver nanoparticles are FDA-approved for their antimicrobial potential, plus they have pleiotropic benefits for eradicating cancer cells. In the current work we synthesized photothermal silver nanoparticles (AgNPs) with an absorption at 800 nm for heat generation when exposed to near-infrared laser irradiation. Breast cell lines MCF 10A, MCF7, and MDA MB 231 were infected with Pseudomonas aeruginosa, and their response to AgNPs, heat, or photothermal therapy (PTT) was evaluated. The results demonstrate that the application of a brief heating of cells treated with AgNPs offers a synergistic benefit in killing both infected and non-infected cells. Using 10 µg/mL of AgNPs plus laser stimulation induced a temperature change of 12 °C, which was sufficient for reducing non-infected breast cells by 81-94%. Infected breast cells were resistant to PTT, with only a reduction of 45-68%. In the absence of laser stimulation, 10 µg/mL of AgNPs reduced breast cell populations by 10-65% with 24 h of exposure. This concentration had no impact on the survival of planktonic bacteria with or without laser stimulation, although infected breast cells had a 42-90% reduction in intracellular bacteria. Overall, this work highlights the advantages of AgNPs for the generation of heat, and to augment the benefits of heat, in breast cancer cells harboring intracellular infection.

Palladium Nanocapsules for Photothermal Therapy in the Near-Infrared II Biological Window

Recent developments in nanomaterials with programmable optical responses and their capacity to modulate the photothermal effect induced by an extrinsic source of light have elevated plasmonic photothermal therapy (PPTT) to the status of a favored treatment for a variety of malignancies. However, the low penetration depth of near-infrared-I (NIR-I) lights and the need to expose the human body to a high laser power density in PPTT have restricted its clinical translation for cancer therapy. Most nanostructures reported to date exhibit limited performance due to (i) activity only in the NIR-I region, (ii) the use of intense laser, (iii) need of large concentration of nanomaterials, or (iv) prolonged exposure times to achieve the optimal hyperthermia state for cancer phototherapy. To overcome these shortcomings in plasmonic nanomaterials, we report a bimetallic palladium nanocapsule (Pd Ncap)─with a solid gold bead as its core and a thin, perforated palladium shell─with extinction both in the NIR-I as well as the NIR-II region for PPTT applications toward cancer therapy. The Pd Ncap demonstrated exceptional photothermal stability with a photothermal conversion efficiency of ∼49% at the NIR-II (1064 nm) wavelength region at a very low laser power density of 0.5 W/cm2. The nanocapsules were further surface-functionalized with Herceptin (Pd Ncap-Her) to target the breast cancer cell line SK-BR-3 and exploited for in vitro PPTT applications using NIR-II light. Pd Ncap-Her caused more than 98% cell death at a concentration of just 50 μg/mL and a laser power density of 0.5 W/cm2 with an output power of only 100 mW. Flow cytometric and microscopic analyses revealed that Pd Ncap-Her-induced apoptosis in the treated cancer cells during PPTT. Additionally, Pd Ncaps were found to have reactive oxygen species (ROS) scavenging ability, which can potentially reduce the damage to cells or tissues from ROS produced during PPTT. Also, Pd Ncap demonstrated excellent in vivo biocompatibility and was highly efficient in photothermally ablating tumors in mice. With a high photothermal conversion and killing efficiency at very low nanoparticle concentrations and laser power densities, the current nanostructure can operate as an effective phototherapeutic agent for the treatment of different cancers with ROS-protecting ability.

Probing plasmon-induced surface reactions using two-dimensional correlation vibrational spectroscopy

Surface plasmon resonance (SPR) has the ability to drive catalytic conversion of the reactant molecules via the production of hot electrons, which in general requires high activation energy. The reactions driven by these hot electrons are critical and essential in various heterogeneous surface catalytic reactions. However, there is a need to understand the dynamics of surface reactions and the underlying mechanism, which are influenced by several factors such as the constitution of the nanoparticle, exposure time, and reaction conditions to name a few. However, the effect of solvent in stabilizing the electron-hole pair, the orientation, and the surface coverage of the analyte are poorly understood due to the limitations of current methods. To get deeper insights into the reaction dynamics, we have demonstrated the combined utility of plasmon-enhanced Raman spectroscopy and Two-dimensional correlation spectroscopy (2DCOS) to study the plasmon-driven conversion of 4-nitrothiophenol on the surface of plasmonic nanoparticles. Interestingly, this combined technique provided us with previously unobservable results regarding surface catalysis by conventional spectroscopic analysis alone. Specifically, for the first time, 2DCOS provided critical insights in bridging the gap in our understanding of the interplay of solvent effect, orientation, and surface packing of the analyte molecules. It was observed that certain species like 4,4-dimercaptoazobenzene (DMAB) or 4-aminothiophenol (4-ATP) can be selectively formed based on the ordered or disordered phases of the analytes on the surface, thus paving the way to precisely control light-driven reactions through operando spectroscopy.

Recent advances of Au@Ag core-shell SERS-based biosensors

The methodological advancements in surface-enhanced Raman scattering (SERS) technique with nanoscale materials based on noble metals, Au, Ag, and their bimetallic alloy Au-Ag, has enabled the highly efficient sensing of chemical and biological molecules at very low concentration values. By employing the innovative various type of Au, Ag nanoparticles and especially, high efficiency Au@Ag alloy nanomaterials as substrate in SERS based biosensors have revolutionized the detection of biological components including; proteins, antigens antibodies complex, circulating tumor cells, DNA, and RNA (miRNA), etc. This review is about SERS-based Au/Ag bimetallic biosensors and their Raman enhanced activity by focusing on different factors related to them. The emphasis of this research is to describe the recent developments in this field and conceptual advancements behind them. Furthermore, in this article we apex the understanding of impact by variation in basic features like effects of size, shape varying lengths, thickness of core-shell and their influence of large-scale magnitude and morphology. Moreover, the detailed information about recent biological applications based on these core-shell noble metals, importantly detection of receptor binding domain (RBD) protein of COVID-19 is provided.

MXene coupled graphitic carbon nitride nanosheets based plasmonic photocatalysts for removal of pharmaceutical pollutant

The continuous rise in the amount of industrial and pharmaceutical waste in water sources is an alarming concern. Effective strategies should be developed for the treatment of pharmaceutical industrial waste. Hence the alternative renewable source of energy, such as solar energy, should be utilized for a sustainable future. Herein, a series of Au plasmonic nanoparticle decorated ternary photocatalysts comprising graphitic carbon nitride and Ti₃C₂ MXene has been designed to degrade colourless pharmaceutical pollutants, cefixime under visible light irradiation. These photocatalysts were synthesized by varying the amount of Ti₃C₂ MXene, and their catalytic potential was explored. The optimized photocatalyst having 3 wt% Ti₃C₂ MXene achieved 64.69% removal of the pharmaceutical pollutant, cefixime within 105 min of exposure to visible light. The presence of the Au nanoparticles and MXene in the nanocomposite facilitates the excellent charge carrier separation and increased the number of active sites due to the formation of interfacial contact with graphitic carbon nitride nanosheets. Besides, the plasmonic effect of the Au nanoparticles improves the absorption of light causing enhanced photocatalytic performance of the nanocomposite. Based on the obtained results, a plausible mechanism has been formulated to understand the contribution of different components in photocatalytic activity. In addition, the optimized photocatalyst shows excellent activity and can be reused for up to three cycles without any significant loss in its photocatalytic performance. Overall, the current work provides deeper physical insight into the future development of MXene graphitic carbon nitride-based plasmonic ternary photocatalysts.

Multibranched Au-Ag-Pt Nanoparticle as a Nanozyme for the Colorimetric Assay of Hydrogen Peroxide and Glucose

Many studies have recently produced artificial enzymes with metal nanoparticles (NPs) to overcome the limitations of natural enzymes, such as low stability, high cost, and storage problems. In particular, gold NPs exhibit peroxidase-like activity and are strongly influenced by external parameters, such as pH, temperature, size, shape, and functional layer, which change the enzyme activity. Here, chitosan-capped multibranched Au-Ag-Pt NPs (CCNPs) that mimic peroxidase were synthesized using various peroxidase-mimicking strategies. The results demonstrated that enzyme activity sequentially increased because of the multibranched Au-Ag NPs coated with Pt and chitosan. The enzyme activity of the particle was evaluated through the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB), which causes a color change into blue. This change was observable with the naked eye and could be used practically. The color change depended on the concentration of hydrogen peroxide (H₂O₂), and it was shown that the CCNPs could be applied to measure H₂O₂ with a limit of detection (LOD) of 0.054 mM. Furthermore, with glucose oxidase, the CCNPs can be used for glucose detection with an LOD of 0.289 mM. Also, the potential of the CCNP application in human serum was shown through the serum test. Thus, this study suggested the utilization of the multibranched Au-Ag-Pt NPs that mimic the peroxidase activity of natural enzymes and the possibility of application in various biological analyses.

Recent Insights into NIR-Light-Responsive Materials for Photothermal Cell Treatments

Controlling cells using photo-responsive materials is highly indispensable in the current biomedical sector. Considering the potential side effects of nanoparticles, it has become a challenge to control cells with photo-responsive materials. Recent studies have described several methods for controlling cell behavior using nanoparticles subjected to the near-infrared (NIR) laser light operating at the wavelength of 808 nm to 980 nm and at the power densities of 0.33 to 0.72 W·cm^-2. The challenge here is the preparation of biocompatible nanoparticles for both in vivo and in vitro studies and understanding cell behavior with an external light source recommended for biological application. Earlier studies have well documented many approaches and associated mechanisms for controlling cell behavior and the interaction between nanoparticles, cells, and appropriate external light sources. In this review, various nanomaterials such as metal nanomaterials and carbon-based nanomaterials are compared systematically regarding the effects of controlling cell behavior and inflammation by studying their mechanisms, route of administration, dose, and adverse effects such as toxicity and the interaction of nanoparticles with a specific wavelength of the light. Future directions should focus on stable and efficient light-responsive materials with minimal cytotoxicity.

Recent developments in the use of gold and silver nanoparticles in biomedicine

Gold and silver nanoparticles (NPs) are widely used in the biomedical research both in the therapeutic and the sensing/diagnostics fronts. Both metals share some common optical properties with surface plasmon resonance being the most widely exploited property in therapeutics and diagnostics. Au NPs exhibit excellent light‐to‐heat conversion efficiencies and hence have found applications primarily in precision oncology, while Ag NPs have excellent antibacterial properties which can be harnessed in biomaterials' design. Both metals constitute excellent biosensing platforms owing to their plasmonic properties and are now routinely used in various optical platforms. The utilization of Au and Ag NPs in the COVID‐19 pandemic was rapidly expanded mostly in biosensing and point‐of‐care platforms and to some extent in therapeutics. In this review article, the main physicochemical properties of Au and Ag NPs are discussed with selective examples from the recent literature.

This article is categorized under:

Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease

Diagnostic Tools > In Vitro Nanoparticle‐Based Sensing

Nanotechnology Approaches to Biology > Nanoscale Systems in Biology

N-Methyl-2-pyrrolidone as a Reaction Medium for Gold(III)-Ion Reduction and Star-like Gold Nanostructure Formation

The efficiency of a wet chemical route to synthesize gold nanostructures with tunable size and shape significantly depends on the applied solvent and the interaction of solvent molecules with other species such as gold ions. The ability of the organic solvent N-methyl-2-pyrrolidone (NMP) as a suitable medium for application in star-like gold nanostructure (AuNS) synthesis with a tunable morphology at ambient conditions has been investigated. The time-dependent analysis of the UV-vis absorption spectra of AuIIICl4 - in a pure NMP solution illustrates the role of NMP as simultaneous complexing and reducing agents. Kinetic studies indicate that AuIIICl4 - in NMP solution is reduced to AuICl2 -, with no need to use another reducing agent, any external energy sources, or solvent pretreatment. This is because AuI species stay stable in this solution unless poly(vinylpyrrolidone) (PVP) catalyzes their disproportionation. Morphological studies by transmission electron microscopy (TEM) specify the high-yield synthesis of AuNS with monocrystalline spikes in a concentrated NMP solution by PVP. This study illustrates that the presence of seeds, as another agent to catalyze the disproportionation of AuI species, makes it possible to synthesize AuNS in varying concentrations of PVP in this medium. The role of PVP concentration and the presence of seeds in the formation kinetics, morphology, and optical properties is systematically discussed. The results achieved through this study develop a straightforward and safe procedure for AuNS synthesis in high yield in a water-miscible organic polar solvent with tunable morphology and optical properties. Considering the high capability of NMP to dissolve various types of polymers and hydrophobic ligands, synthesizing AuNS in this solvent opens a window to a practical and easy way to fabricate gold-based nanomaterials with fascinating optical properties.

State of the Art on Green Route Synthesis of Gold/Silver Bimetallic Nanoparticles

Recently, bimetallic nanoparticles (BMNPs) blending the properties of two metals in one nanostructured system have generated enormous interest due to their potential applications in various fields including biosensing, imaging, nanomedicine, and catalysis. BMNPs have been developed later with respect to the monometallic nanoparticles (MNPs) and their physicochemical and biological properties have not yet been comprehensively explored. The manuscript aims at collecting the main design criteria used to synthetize BMNPs focusing on green route synthesis. The influence of experimental parameters such as temperature, time, reagent concentrations, capping agents on the particle growth and colloidal stability are examined. Finally, an overview of their nanotechnological applications and biological profile are presented.

Influence of elemental composition on structural, thermal and hydration behavior of gold-silver bimetallic nanoparticles

In this study, molecular dynamics simulations (MDs) have been employed to explore the influence of elemental composition on the structural, thermal, and hydration behavior of the core-shell gold-silver bimetallic nanoparticles with three different concentrations Au₁₃₅Ag₁₁₄, Au₈₇Ag₁₆₂, and Au₅₅Ag₁₉₄. The pure gold and silver metal nanoparticles have also been studied for the sake of comparison. The calculated cohesive and formation energy values reveal the enhancement in the stability of gold-silver bimetallic nanoparticles with the increase in the concentration of gold. The specific heat capacity value of the bimetallic gold-silver nanoparticles has been found to increase linearly with the concentration of silver. This suggests that the specific heat capacity value of the gold-silver bimetallic nanoparticles may be improved by raising their silver concentration. The enhancement of specific heat capacity value with respect to the concentration of silver may be attributed to the enhanced phonon density. There is no significant difference in the computed hydration shell and water residence time of the gold-silver bimetallic nanoparticles with respect to their mixing ratio. The obtained stable structure, tunable specific heat capacity values, and the predicted hydration properties of the gold-silver bimetallic nanoparticles may be harnessed for their technological and biological applications.

Plasmon-driven photocatalytic properties based on the surface of gold nanostar particles

Surface plasmon resonance (SPR) generated in gold nanoparticles can induce the conversion of p-Aminothiophenol (PATP) molecules into p,p'-dimercaptoazobenzene (DMAB) molecules by coupling reaction under the action of excitation light. Molecular detection of samples by surface enhanced Raman spectroscopy (SERS) techniques allows the study of their plasma-driven photocatalytic reaction processes. In this study, we used gold nanostars (GNS) as the substrate to study its catalytic performance and sensitivity. On this basis, catalytic substrates of gold nanospheres (GNPs) were prepared for comparison. The catalytic reactions of PATP molecules on each of the above two substrates were systematically investigated under 633 nm laser irradiation. The reduction process was subsequently observed by introducing NaBH₄ solution. The results show that photocatalytic reactions can be achieved on both substrates under laser excitation at the same wavelength. However, the catalytic and reduction reaction rates on GNSs as a substrate are much faster than those of GNPs. This phenomenon may be due to the abundant nano-branched microstructures on the surface of GNSs, which will generate more and stronger local surface plasma hot spots under the irradiation of excitation light. In order to test the above hypothesis, the surface electromagnetic field distribution of two nanostructures was numerically simulated using the finite-difference time domain (FDTD) method. It is found that the star-like nanostructures not only have the same inter-particle hot spot system as the spherical nanostructures, but also have a large number of high-intensity single-particle hot spot systems arising from the abundance of branched nanostructures on their own surfaces. Compared with the spherical nanostructures, they are characterized by a dual hot spot system, which accelerates the photocatalytic reaction rate. The above experiments are of some reference significance for the in-depth study of multi-branched nanostructures and surface plasma distribution properties and their applications.

Spiky yolk-shell AuAg bimetallic nanorods with uniform interior gap for the SERS detection of thiram residues in fruit juice

By using gold nanorods with silver coating as the sacrificial templates, we prepared spiky yolk-shell AuAg bimetallic nanorods with uniform interior gap via galvanic replacement reaction. The length and number of Au tips of the spiky yolk-shell AuAg nanorods can be tuned simultaneously by altering HAuCl₄ volume. The influence of HAuCl₄ volume and the sliver layer thickness on the SERS activity of spiky yolk-shell AuAg nanorods are studied. When the sliver layer is thin, the interior gap has not been shielded completely and the outer shell has obvious tips, thus the surface-enhanced Raman scattering (SERS) activity has the strongest enhancement with an enhancement factor (EF) of 4.9 × 10⁵. The spiky yolk-shell AuAg nanorods with the strongest SERS activity are used as SERS substrates to detect thiram. The results demonstrate that the SERS intensity increases linearly with the logarithmic concentration of thiram in the range of 10^-3 M to 10^-7 M. The detection limit is as low as 97 nM, which is lower than the maximum pesticide residue limit (29 µM) in fruits stipulated by the US Environmental Protection Agency (EPA). Therefore, the spiky yolk-shell AuAg bimetallic nanorods have important practical application value in pesticide detection.

Spiky Durian-Shaped Au@Ag Nanoparticles in PEDOT:PSS for Improved Efficiency of Organic Solar Cells

The localized surface plasmon resonance (LSPR) effects of nanoparticles (NPs) are effective for enhancing the power conversion efficiency (PCE) of organic solar cells (OSCs). In this study, spiky durian-shaped Au@Ag core-shell NPs were synthesized and embedded in the hole transport layer (HTL) (poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS)) of PTB7:PC₇₁BM bulk-heterojunction OSCs. Different volume ratios of PEDOT:PSS-to-Au@Ag NPs (8%, 10%, 12%, 14%, and 16%) were prepared to optimize synthesis conditions for increased efficiency. The size properties and surface morphology of the NPs and HTL were analyzed using field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and atomic force microscopy (AFM). UV–Vis spectroscopy and current density–voltage (J-V) analysis were used to investigate the electrical performance of the fabricated OSCs. From the results, we observed that the OSC with a volume ratio of 14% (PEDOT:PSS–to–Au@Ag NPs) performed better than others, where the PCE was improved from 2.50% to 4.15%, which is a 66% increase compared to the device without NPs.

Controlling morphology evolution of titanium oxide-gold nanourchin for photocatalytic degradation of dyes and photoinactivation of bacteria in the infected wound

We report a one-pot, room-temperature, morphology-controlled synthesis of titanium oxide (TiO_x)-gold nanocomposites (TiO_x-Au NCs) using HAuCl₄ and TiCl₃ as precursors, and catechin as reducing agent. TiO_x-Au NCs have a range of morphologies from star-like to urchin-like shape depending on the concentration of TiCl₃ in the reaction mixture. The urchin-shaped TiO_x-Au NCs exhibited excellent photocatalytic activity toward dye degradation due to strong light absorption, plasmon-induced excitation, high conductivity of the gold, and reduced hole-electron pair recombination. TiO_x-Au NCs have the advantage of a wide range of light absorption and surface plasmon absorption-mediated excitation due to their abundant gold spikes, which enabled the degradation of dyes over 97% in 60 min, using a xenon lamp as a light source. In addition, TiO_x-Au NCs are highly efficient for the photoinactivation of Escherichia coli and methicillin-resistant Staphylococcus aureus (MRSA), and Candida albicans through the photodynamic generation of reactive oxygen species (ROS) and damage to the bacterial membrane. The catechin derivatives on the NCs effectively promoted curing MRSA infected wounds in rats through inducing collagen synthesis, migration of keratinocytes, and neovascularization.

Antibacterial Activity of Porous Gold Nanocomposites via NIR Light-Triggered Photothermal and Photodynamic Effects

Phototherapeutic approaches, including photothermal therapy (PTT) and photodynamic therapy (PDT), have become a promising strategy to combat microbial pathogens and tackle the crisis brought about by antibiotic-resistant strains. Herein, porous gold nanoparticles (AuPNs) were synthesized as photothermal agents and loaded with indocyanine green (ICG), a common photosensitizer for PDT, to fabricate a nanosystem presenting near-infrared (NIR) light-triggered synchronous PTT and PDT effects. The AuPNs can not only convert NIR light into heat with a high photothermal conversion efficiency (50.6-68.5%), but also provide a porous structure to facilely load ICG molecules. The adsorption of ICG onto AuPNs was mainly driven by electrostatic and hydrophobic interactions with the surfactant layer of AuPNs, and the aggregate state of ICG significantly enhanced its generation of reactive oxygen species. Moreover, taking advantage of its synergistic PTT and PDT effect, the hybrid nanocomposites displayed a remarkable antibacterial effect to the gram-positive pathogen Staphylococcus aureus (S. aureus) upon 808 nm laser irradiation.

Study of surface enhanced Raman scattering of IR-780 Iodide molecules using Au-Ag bimetallic nanostructures with blunt and sharp sprouts

Au-Ag bimetallic nanostructures with blunt and sharp sprouts are synthesized using a high yield one-step synthesis process. For the first time, these nanostructures are obtained at different growth times in the same synthesis process. The synthesized nanostructures are characterized using a field emission-scanning electron microscope, transmission electron microscope, energy dispersive X-ray analyzer, and UV-Visible spectrometer. The plasmon-active substrates are fabricated using synthesized nanostructures with ease. The Raman probe (IR-780 Iodide) molecules are dispersed on the surface of plasmon-active substrates by drop-casting 10 μl of dye solution of concentration ranging from 1 μM to 1 picomolar (pM) on the substrates. The surface enhanced Raman scattering (SERS) spectra are recorded for each concentration. The nanostructures with blunt sprouts are found useful only up to 100 pM. However, this limitation is brought down to 1 pM using nanostructures with sharp sprouts. The normal Raman scattering spectra of molecules and microcrystals are also recorded and compared with the SERS spectra of molecules. The experimental SERS enhancement factor (EF) is found around 1 × 10⁹ for the Raman probe solution with 1 pM concentration. Finite Element Method (FEM) simulations are performed for estimating the possible single molecule SERS enhancement.

Flexible Transparent Polypyrrole-Decorated MXene-Based Film with Excellent Photothermal Energy Conversion Performance

Flexible transparent heaters based on photothermal energy conversion are highly desired for next-generation electronic devices. However, how to balance the photothermal conversion efficiency and transparency is still a huge challenge. In this work, we demonstrate a flexible polycarbonate (PC) film with balanced photothermal energy conversion performance and transparency obtained from the spraying polypyrrole (PPy)-modified Ti₃C₂T_x MXene (MXene@PPy) layer. Due to the synergistic light-to-heat effects of MXene and the attached PPy nanoparticles, the resulted transparent film heater (MP-PC) can obtain a satisfying photothermal conversion performance (47.5 °C at 100 mW/cm²) at a low spraying density of MXene and thus show an effective transmittance of 51.61%, simultaneously. Moreover, the photothermal conversion performance reveals an outstanding stability without significant deterioration after exposing to an outdoor environment for seven months. Besides, arising from the excellent surface electrical resistance (413 Ω/sq), the MP-PC film also exhibits an effective Joule heating capacity with a high heating temperature of 108 °C at 24 V input voltage. As one of the promising applications, the MP-PC film exhibits the effectiveness and feasibility as a light-triggered thermal therapy film for human skin in cold environments.

Mitochondria-Targeted BODIPY Nanoparticles for Enhanced Photothermal and Photoacoustic Imaging In Vivo

Short-wavelength absorption and emission (<600 nm), hydrophobicity, and low selectivity have greatly restricted the biomedical applications of BODIPY. Herein, a series of mitochondria-targeted BODIPY nanoparticles with a cationic triphenylphosphine (TPP) group (Mito-BDP1-5 NPs) bearing different lengths of ethylene glycol (0-4 units), along with HO-BDP5 without a cationic TPP group for comparison, have been rationally designed and prepared to investigate the interplay between their structures and the related properties. Our studies found that Mito-BDP1-4 NPs showed a tendency of aggregation and precipitation while Mito-BDP5 NPs could be stable in aqueous solutions. Compared with HO-BDP5, tailor-made Mito-BDP5 possessed a high photothermal conversion efficiency (PCE) of 76.6 vs 9.0% and exhibited the highest photoinduced cytotoxicity. Upon NIR irradiation, the temperature induced by Mito-BDP5 NPs increased rapidly from room temperature to 76.0 °C in vitro and 50.0 °C at the tumor site in vivo within 5 min. Furthermore, effective mitochondrial imaging in vitro, photothermal imaging (PTI), and photoacoustic imaging (PAI) in vivo were achieved. In this paper, we developed tailor-made photothermal agents for targeting mitochondria and enhancing the PTI and PAI performances, which could be potentially applied in clinical precision theranostics.

Biogenic synthesis of bimetallic nanoparticles and their applications

The current advancements in nanotechnology suggest a sustainable development in the green synthesis of bimetallic nanoparticles (BMNPs) through green approaches. Though challenging, nano phyto technology has versatile methods to achieve desired unique properties like optic, electronic, magnetic, therapeutic, and catalytic efficiencies. Bio-inspired, facile synthesis of bifunctional BMNPs is possible using abundant, readily available natural plant sources, bio-mass wastes and microorganisms. Synergistic effects of two different metals on mixing, bring new insight for the vast applications, which is not achievable in using monometallic NPs. By adopting bio-inspired greener approaches for synthesizing NPs, the risk of environmental toxicity caused by conventional physicochemical methods become negligible. This article hopes to provide the significance of cost-effective, one-step, eco-friendly and facile synthesis of noble/transition bimetallic NPs. This review article endows an overview of the bio-mediated synthesis of bimetallic NPs, classifications of BMNPs, current characterization techniques, possible mechanistic aspects for reducing metal ions, and the stability of formed NPs and bio-medical/industrial applications of fabricated NPs. The review also highlights the prospective future direction to improve reliability, reproducibility of biosynthesis methods, its actual mechanism in research works and extensive application of biogenic bimetallic NPs.

Probing the Interaction of Bovine Serum Albumin with Copper Nanoclusters: Realization of Binding Pathway Different from Protein Corona

With an aim to understand the interaction mechanism of bovine serum albumin (BSA) with copper nanoclusters (CuNCs), three different types CuNCs having chemically different surface ligands, namely, tannic acid (TA), chitosan, and cysteine (Cys), have been fabricated, and investigations are carried out in the absence and presence of protein (BSA) at ensemble-averaged and single-molecule levels. The CuNCs, capped with different surface ligands, are consciously chosen so that the role of surface ligands in the overall protein-NCs interactions is clearly understood, but, more importantly, to find whether these CuNCs can interact with protein in a new pathway without forming the "protein corona", which otherwise has been observed in relatively larger nanoparticles when they are exposed to biological fluids. Analysis of the data obtained from fluorescence, ζ-potential, and ITC measurements has clearly indicated that the BSA protein in the presence of CuNCs does not attain the binding stoichiometry (BSA/CuNCs > 1) that is required for the formation of "protein corona". This conclusion is further substantiated by the outcome of the fluorescence correlation spectroscopy (FCS) study. Further analysis of data and thermodynamic calculations have revealed that the surface ligands of the CuNCs play an important role in the protein-NCs binding events, and they can alter the mode and thermodynamics of the process. Specifically, the data have demonstrated that the binding of BSA with TA-CuNCs and Chitosan-CuNCs follows two types of binding modes; however, the same with Cys-CuNCs goes through only one type of binding mode. Circular dichroism (CD) measurements have indicated that the basic structure of BSA remains almost unaltered in the presence of CuNCs. The outcome of the present study is expected to encourage and enable better application of NCs in biological applications.

A pH-controlled one-pot synthesis of gold nanostars by using a zwitterionic protein hydrolysate (gelatin): an enhanced radiosensitization of cancer cells

One-pot green synthesis of gold nanoparticles of desired shapes is developed by using FDA approved and economic GRAS materials. The gold nanoparticles exhibit radio-sensitization in A549 cells with star shaped nanoparticles showing maximum efficacy.

Hierarchical Gold Mesoflowers in Enzyme Engineering: An Environmentally Friendly Strategy for the Enhanced Enzymatic Performance and Biodiesel Production

To expand the field of nanomaterial and engineering of enzyme in eco-friendly processes, gold mesoflower (Au-MF) nanostructure was applied for preparation of three series of immobilized lipase (Au-MF/SAM 1-3) through biofunctionalization of surface by Ugi multicomponent reaction. The synthesized Au-MF/SAM 1-3/lipase as unique biocatalysts was confirmed by different analytical tools and techniques. Compared to the free lipase, the Au-MF/SAM 1-3/lipase showed more stability at high temperature and pH. Also, these biocatalysts showed high storage stability and reusability after 2 months and eight cycles, respectively. Moreover, the kinetic behavior was investigated and the results showed a minimal impairment of catalytic activity of immobilized lipase. The kinetic constants of the immobilized lipase, Au-MF/SAM 2/lipase, are K_m = 0.37 mM, V_max = 0.22 mM min^-1, and k_cat = 154 min^-1. The immobilized lipase showed smaller activation energy (E_a) than that of free enzyme, indicating that the immobilized enzyme is less sensitive to temperature. In the following, the biodiesel production from palmitic acid was studied in the presence of Au-MF/SAM 2/lipase as an efficient biocatalyst. The influence of different reaction parameters such as temperature, molar ratio of alcohol to palmitic acid, water content, and lipase amount was deeply investigated.

Fabrication of Anisotropic Cu Ferrite-Polymer Core-Shell Nanoparticles for Photodynamic Ablation of Cervical Cancer Cells

In this work we developed methylene blue-immobilized copper-iron nanoparticles (MB-CuFe NPs) through a facile one-step hydrothermal reaction to achieve a better phototherapeutic effect. The Fe/Cu ratio of the CuFe NPs was controllable by merely changing the loading amount of iron precursor concentration. The CuFe NPs could serve as a Fenton catalyst to convert hydrogen peroxide (H2O2) into reactive oxygen species (ROS), while the superparamagnetic properties also suggest magnetic resonance imaging (MRI) potential. Furthermore, the Food and Drug Administration (FDA)-approved MB photosensitizer could strongly adsorb onto the surface of CuFe NPs to facilitate the drug delivery into cells and improve the photodynamic therapy at 660 nm via significant generation of singlet oxygen species, leading to enhanced cancer cell-damaging efficacy. An MTT (thiazolyl blue tetrazolium bromide) assay proved the low cytotoxicity of the CuFe NPs to cervical cancer cells (HeLa cells), namely above 80% at 25 ppm of the sample dose. A slight dissolution of Cu and Fe ions from the CuFe NPs in an acidic environment was obtained, providing direct evidence for CuFe NPs being degradable without the risk of long-term retention in the body. Moreover, the tremendous photo-to-thermal conversion of CuFe NPs was examined, which might be combined with photodynamic therapy (PDT) for promising development in the depletion of cancer cells after a single pulse of deep-red light irradiation at high laser power.

Facile Interfacial Synthesis of Densely Spiky Gold Nano-Chestnuts With Full Spectral Absorption for Photothermal Therapy

The gold nanostructure is regarded as the most promising photothermal agent due to its strong localized surface plasma resonance (LSPR) effect. In particular, the gold nanostructures with sharp spikes on the surface have higher optical signal enhancement, owing to the sharp tips drastically enhancing the intense nanoantenna effect. However, current approaches for the synthesis of spiky gold nanostructures are either costly, complicated, or uncontrollable. Herein, we report a novel strategy to synthesize gold nano-chestnuts (SGNCs) with sharp spikes as an excellent photothermal agent. The SGNCs were prepared by a facile one-pot interfacial synthetic method, and their controllable preparation mechanism was acquired. The SGNCs exhibited ideal full-spectrum absorption and showed excellent photothermal effect. They have a photothermal conversion efficiency (η) as high as 52.9%, which is much higher than traditional photothermal agents. The in vitro and in vivo results show that the SGNCs could efficiently ablate the tumor cells. Thus, the SGNCs have great potential in photothermal therapy applied in malignant tumors.

Synthesis of Au, Ag, and Au-Ag Bimetallic Nanoparticles Using Pulicaria undulata Extract and Their Catalytic Activity for the Reduction of 4-Nitrophenol

Plant extract of Pulicaria undulata (L.) was used as both reducing agent and stabilizing ligand for the rapid and green synthesis of gold (Au), silver (Ag), and gold–silver (Au–Ag) bimetallic (phase segregated/alloy) nanoparticles (NPs). These nanoparticles with different morphologies were prepared in two hours by stirring corresponding metal precursors in the aqueous solution of the plant extracts at ambient temperature. To infer the role of concentration of plant extract on the composition and morphology of NPs, we designed two different sets of experiments, namely (i) low concentration (LC) and (ii) high concentration (HC) of plant extract. In the case of using low concentration of the plant extract, irregular shaped Au, Ag, or phase segregated Au–Ag bimetallic NPs were obtained, whereas the use of higher concentrations of the plant extract resulted in the formation of spherical Au, Ag, and Au–Ag alloy NPs. The as-prepared Au, Ag, and Au–Ag bimetallic NPs showed morphology and composition dependent catalytic activity for the reduction of 4-nitrophenol (4-NPh) to 4-aminophenol (4-APh) in the presence of NaBH₄. The bimetallic Au–Ag alloy NPs showed the highest catalytic activity compared to all other NPs.

Large-area periodic arrays of gold nanostars derived from HEPES-, DMF-, and ascorbic-acid-driven syntheses

With arms radiating from a central core, gold nanostars represent a unique and fascinating class of nanomaterials from which extraordinary plasmonic properties are derived. Despite their relevance to sensing applications, methods for fabricating homogeneous populations of nanostars on large-area planar surfaces in truly periodic arrays is lacking. Herein, the fabrication of nanostar arrays is demonstrated through the formation of hexagonal patterns of near-hemispherical gold seeds and their subsequent exposure to a liquid-state chemical environment that is conducive to colloidal nanostar formation. Three different colloidal nanostar protocols were targeted where HEPES, DMF, and ascorbic acid represent a key reagent in their respective redox chemistries. Only the DMF-driven synthesis proved readily adaptable to the substrate-based platform but nanostar-like structures emerged from the other protocols when synthetic controls such as reaction kinetics, the addition of Ag⁺ ions, and pH adjustments were applied. Because the nanostars were derived from near-hemispherical seeds, they acquired a unique geometry that resembles a conventional nanostar that has been truncated near its midsection. Simulations of plasmonic properties of this geometry reveal that such structures can exhibit maximum near-field intensities that are as much as seven-times greater than the standard nanostar geometry, a finding that is corroborated by surface-enhanced Raman scattering (SERS) measurements showing large enhancement factors. The study adds nanostars to the library of nanostructure geometries that are amenable to large-area periodic arrays and provides a potential pathway for the nanofabrication of SERS substrates with even greater enhancements.

Synthesis of large gold nanoparticles with deformation twinnings by one-step seeded growth with Cu(ii)-mediated Ostwald ripening for determining nitrile and isonitrile groups

In this work, uniform and large gold nanoparticles (Au NPs) including quasi-spherical (QS) Au NPs with average diameters of 70 to 196 nm and trisoctahedral (TOH) Au NPs with average diameters of 140 to 195 nm were successfully synthesized by controlling the concentration of Cu2+ ions and the particle number of 3 nm Au-NP seeds, respectively, using a one-step seeded growth method with Cu2+-mediated Ostwald ripening. It is found that because of the concentration-dependent under-potential deposition of Cu2+ ions (CuUPD), 3 nm Au-NP seeds are firstly changed into Au NPs with a controlled QS- or TOH shape at the initial growth stage, followed by the conformal growth of Au atoms onto the initially formed Au NPs due to Cu2+-mediated Ostwald ripening, in which the extra Au atoms come from the dissolution of in situ Au nuclei by the unavoidable self-nucleation. Moreover, the as-prepared QS Au NPs with a rough surface exhibit a better SERS performance for physically adsorbed probes (crystal violet, CV) than the TOH Au NPs with sharp tips and with a comparable size. Furthermore, the as-prepared QS Au NPs can be used to distinguish nitrile and isonitrile groups by surface-enhanced Raman scattering (SERS) due to the presence of deformation twinnings. Thus, the as-prepared QS Au NPs with a rough surface and deformation twinnings can be further used as templates for the fabrication of bimetallic materials with multi-functionalities.

The morphology regulation and plasmonic spectral properties of Au@AuAg yolk-shell nanorods with controlled interior gap

Au@AuAg yolk-shell nanorods with tunable and uniform interior gap were synthesized through galvanic replacement reaction, where Au@Ag core-shell nanorods served as sacrificial templates and HAuCl₄ solution served as reductant. The effects of HAuCl₄, Ag shell thickness and aspect ratio (AR) of Au nanorods on the morphology of Au@AuAg yolk-shell nanorods had been investigated systemically. The results clearly indicated that AuAg alloy shell thickness of Au@AuAg yolk-shell nanorods could be increased from 3.6 to 10.0 nm by varying the amount of HAuCl₄. Meanwhile, the shape of AuAg alloy shell could be tuned by changing the shape of Ag coating. With the increasing of Ag coating thickness, the interior gap could be finely tuned in the range from 2.6 to 8.1 nm. The uniformity of interior gap could be improved by increasing the AR of Au nanorods. All these tunable geometries can further affect the plasmonic spectral properties of Au@AuAg yolk-shell nanorods. Because of the appearance of interior gap, the longitudinal localized surface plasmon resonance (LSPR) peak of Au@AuAg yolk-shell nanorods was located between that of bare Au nanorods and Au@Ag core-shell nanorods without interior gap. The increase of outer AuAg shell thickness can weaken the coupling between the inner and outer surface of the AuAg shell and lead to the decrease of AR, so the transverse and longitudinal LSPR bands gather together. The decrease of Ag coating thickness can enhance the coupling between inner Au nanorod and outer AuAg shell, which results in the red shift of the longitudinal LSPR band. This paper provides a method for studying the plasmonic coupling between two metal surfaces with a metal layer or a dielectric layer, which is also a new approach for regulating the plasmonic spectral properties of bimetallic nanoparticles. The controllability of Au@AuAg yolk-shell nanorods in both the interior gap and outer alloy shells makes them have potential applications in biomedicine, catalysis, nanoreactors, and energy storage.

Photoelectrochemical immunoassay platform based on MoS2 nanosheets integrated with gold nanostars for neuron-specific enolase assay

MoS₂ nanosheets were prepared by exfoliating MoS₂ bulk crystals with ultrasonication in N-methylpyrrolidone and were integrated with gold nanostars (AuNS) to fabricate an AuNS/MoS₂ nanocomposite. All nanomaterials were characterized by transmission electron microscope, scanning electron microscope, ultraviolet-visible spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. AuNS/MoS₂ nanocomposites were coated onto a glassy carbon electrode (GCE) surface to construct a nanointerface for immobilizing neuron-specific enolase antibody (anti-NSE) thus forming a photoelectrochemical immunoassay system. AuNS can significantly promote the photoelectric conversion of MoS₂ nanosheets improving the performance for a photoelectrochemical assay. Being illuminated with white light LED and controlling the potential at 0.05 V (vs. SCE), the photocurrent generated from anti-NSE(BSA)/AuNS/MoS₂/GCE using 0.15 mol L^-1 ascorbic acid as electron donor can be recorded with amperometry and used as an output signal for NSE quantitative assay. Under optimized experimental conditions, the photocurrent variation for the affinity-binding NSE is proportional to the logarithm of NSE concentration in the range 5.0 pg mL^-1   to 1.5 ng mL^-1 with a detection limit of 3.5 pg mL^-1 (S/N = 3). The practicability of the PEC immunoassay system was evaluated by determining NSE in clinical serum samples. The recoveries ranged from 93.0 to 103% for the determination of NSE in serum samples with a standard addition method. The PEC immunoassay system possesses good accuracy for determining NSE in real samples. Graphical abstract.

Rapid Detection of Carbapenemase-Producing Enterobacteriacae Based on Surface-Enhanced Raman Spectroscopy with Gold Nanostars

The emergence and rapid spread of antibiotic resistance poses a serious threat to healthcare systems across the globe. The existence of carbapenemase-producing Enterobacteriaceae (CPE) such as Klebsiella pneumoniae renders the use of carbapenems, the last-resort class of β-lactam antibiotics, ineffective against bacterial infections, often leading to CPE-associated mortalities. Current methods of detection such as the Carba NP test and modified Hodge's test require hours to days to detect, which delays the response to isolate patients for rapid intervention. Here, we developed a surface-enhanced Raman scattering (SERS)-based detection scheme which utilizes gold nanostars conjugated to a β-lactam antibiotic ceftriaxone (CRO) as a beacon for rapid detection of bacterial β-lactamase secreted by Delhi metalloproteinase (NDM)-producing Escherichia coli as our CPE model with carbapenemase activity. The cleavage of β-lactam ring in CRO by NDM (Class B β-lactamase) caused a detectable reduction in SERS intensities at 722, 1358, and 1495 cm^-1 within 25 min. Ratiometric analysis of the SERS peaks at 722, 1358, and 1495 cm^-1 normalized against the Raman peak of polystyrene cuvette at 620 cm^-1 showed the peak at 1358 cm^-1 having the most significant change in intensity upon CPE detection. This reduced detection time has not been reported to date for CPE detection, and our novel approach using SERS could be extended to detect the activity of other classes of β-lactamases to broaden its clinical utility.

Retracted Article: Synergistic action of star-shaped Au/Ag nanoparticles decorated on AgFeO2 for ultrasensitive SERS detection of a chemical warfare agent on real samples

It is a great challenge to design and fabricate a cost-effective surface-enhanced Raman spectroscopy (SERS) substrate with excellent reproducibility and sensitivity for reliable environmental analysis. In this work, we have synthesized silver ferrite (AgFeO₂) interlinked with star-shaped gold/silver (Au/Ag) bimetallic (BM) nanoparticles (NPs) by a simple physical method for the effective detection of an acetylcholinesterase (AchE) inhibitor, paraoxon ethyl (PE). The successful construction of AgFeO₂@Au/Ag NPs was confirmed by UV-Vis spectroscopy, X-ray diffraction, field emission scanning electron microscopy, energy dispersive X-ray spectroscopy and Raman spectroscopy. The enhancement of the SERS signal is achieved by the synergistic effect of the charge transfer mechanism and electromagnetic mechanism. The Raman peak centered at 1357 cm^-1 was selected as an ideal peak for the quantitative analysis of PE. The AgFeO₂@Au/Ag NPs can detect PE down to 1 × 10^-8 M with a high analytical enhancement factor of 3.53 × 10⁶ and excellent uniformity, as determined randomly from 14 spots (relative standard deviation, RSD, <15%). The recovery values of PE in tap water and tomato juice were from 93.16% to 99.16%. All these results suggest that our proposed SERS substrate has promising potential for the detection of PE. The proposed simple strategy for PE detection by SERS using AgFeO₂@Au/Ag NPs paves the way for future reliable environmental analysis and real sample monitoring.

Multifunctionality of gold nanoparticles: Plausible and convincing properties

In a couple of decades, nanotechnology has become a trending area in science due to it covers all subject that combines diverse range of fields including but not limited to chemistry, physics and medicine. Various metal and metal oxide nanomaterials have been developed for wide range applications. However, the application of gold nanostructures and nanoparticles has been received more attention in various biomedical applications. The unique property of gold nanoparticles (AuNPs) is surface plasmon resonance (SPR) that determine the size, shape and stability. The wide surface area of AuNPs eases the proteins, peptides, oligonucleotides, and many other compounds to tether and enhance the biological activity of AuNPs. AuNPs have multifunctionality including antimicrobial, anticancer, drug and gene delivery, sensing applications and imaging. This state-of-the-art review is focused on the role of unique properties of AuNPs in multifunctionality and its various applications.

Porphyrinoid-based photosensitizers for diagnostic and therapeutic applications: An update

Porphyrin-based molecules are actively studied as dual function theranostics: fluorescence-based imaging for diagnostics and fluorescence-guided therapeutic treatment of cancers. The intrinsic fluorescent and photodynamic properties of the bimodal molecules allows for these theranostic approaches. Several porphyrinoids bearing both hydrophilic and/or hydrophobic units at their periphery have been developed for the aforementioned applications, but better tumor selectivity and high efficacy to destroy tumor cells is always a key setback for their use. Another issue related to their effective clinical use is that, most of these chromophores form aggregates under physiological conditions. Nanomaterials that are known to possess incredible properties that cannot be achieved from their bulk systems can serve as carriers for these chromophores. Porphyrinoids, when conjugated with nanomaterials, can be enabled to perform as multifunctional nanomedicine devices. The integrated properties of these porphyrinoid-nanomaterial conjugated systems make them useful for selective drug delivery, theranostic capabilities, and multimodal bioimaging. This review highlights the use of porphyrins, chlorins, bacteriochlorins, phthalocyanines and naphthalocyanines as well as their multifunctional nanodevices in various biomedical theranostic platforms.

Enhancement of Single Molecule Raman Scattering using Sprouted Potato Shaped Bimetallic Nanoparticles

Herein, for the first time, we report the single molecule surface enhanced resonance Raman scattering (SERRS) and surface enhanced Raman scattering (SERS) spectra with high signal to noise ratio (S/N) using plasmon-active substrates fabricated by sprouted potato shaped Au-Ag bimetallic nanoparticles, prepared using a new one-step synthesis method. This particular shape of the nanoparticles has been obtained by fixing the amount of Au and carefully adjusting the amount of Ag. These nanoparticles have been characterized using scanning electron microscopy, extinction spectroscopy, and glancing angle X-ray diffraction. The single molecule sensitivity of SERS substrates has been tested with two different molecular Raman probes. The origin of the electromagnetic enhancement of single molecule Raman scattering in the presence of sprouted shape nanoparticles has been explained using quasi-static theory as well as finite element method (FEM) simulations. Moreover, the role of (i) methods for binding Raman probe molecules to the substrate, (ii) concentration of molecules, and (iii) Au-Ag ratio on the spectra of molecules has been studied in detail.

2D Freestanding Janus Gold Nanocrystal Superlattices

2D freestanding nanocrystal superlattices represent a new class of advanced metamaterials in that they can integrate mechanical flexibility with novel optical, electrical, plasmonic, and magnetic properties into one multifunctional system. The freestanding 2D superlattices reported to date are typically constructed from symmetrical constituent building blocks, which have identical structural and functional properties on both sides. Here, a general ligand symmetry-breaking strategy is reported to grow 2D Janus gold nanocrystal superlattice sheets with nanocube morphology on one side yet with nanostar on the opposite side. Such asymmetric metallic structures lead to distinct wetting and optical properties as well as surface-enhanced Raman scattering (SERS) effects. In particular, the SERS enhancement of the nanocube side is about 20-fold of that of the nanostar side, likely due to the combined "hot spot + lightening-rod" effects. This is nearly 700-fold of SERS enhancement as compared with the symmetric nanocube superlattices without Janus structures.

Concepts of nanoparticle cellular uptake, intracellular trafficking, and kinetics in nanomedicine

Nanoparticle-based therapeutics and diagnostics are commonly referred to as nanomedicine and may significantly impact the future of healthcare. However, the clinical translation of these technologies is challenging. One of these challenges is the efficient delivery of nanoparticles to specific cell populations and subcellular targets in the body to elicit desired biological and therapeutic responses. It is critical for researchers to understand the fundamental concepts of how nanoparticles interact with biological systems to predict and control in vivo nanoparticle transport for improved clinical benefit. In this overview article, we review and discuss cellular internalization pathways, summarize the field`s understanding of how nanoparticle physicochemical properties affect cellular interactions, and explore and discuss intracellular nanoparticle trafficking and kinetics. Our overview may provide a valuable resource for researchers and may inspire new studies to expand our current understanding of nanotechnology-biology interactions at cellular and subcellular levels with the goal to improve clinical translation of nanomedicines.