Theoretical design of alkaline earthides M+(36 adz) Be- (M+ = V, Cr, Mn, Fe, Co, Ni, Cu, and Zn) with excellent nonlinear optical response and ultraviolet transparency

A novel series of alkaline earthides containing eight complexes based upon 36adz complexant are designed by placing carefully transition metals (V-Zn) on inner side and alkaline earth metal outer side of the complexant i.e., M+(36adz) Be- (M+ = V, Cr, Mn, Fe, Co, Ni, Cu and Zn). All the designed compounds are electronically and thermodynamically stable as evaluated by their interaction energy and vertical ionization potential respectively. Moreover, the true nature of alkaline earthides is verified through NBOs and FMO study, showing negative charge and excess electrons on alkaline earth metal respectively. Furthermore, true alkaline earthides characteristics are evaluated graphically by spectra of partial density state (PDOS). The energy gap (HOMO -LUMO gap) is very small (ranging 2.95 eV-1.89 eV), when it is compared with pure cage 36adz HOMO-LUMO gap i.e., 8.50 eV. All the complexes show a very small value of transition energy ranging from 1.68eV to 0.89eV. Also, these possess higher hyper polarizability values up to 2.8 x 105au (for Co+(36adz) Be-). Furthermore, an increase in hyper polarizability was observed by applying external electric field on complexes. The remarkable increase of 100fold in hyper polarizability of Zn+(36adz) Be- complex is determined after application of external electric field i.e., from 1.7 x 104 au to 1.7 x 106 au when complex is subjected to external electric field of 0.001 au strength. So, when external electric field is applied on complexes it enhances the charge transfer, polarizability and hyper polarizability of complexes and proves to be effective for designing of true alkaline earthides with remarkable NLO response.

Theoretical Perspective toward Designing of 5-Methylbenzo [1,2-b:3,4-b':6,5-b″] trithiophene-Based Nonlinear Optical Compounds with Extended Acceptors

A series of benzotrithiophene-based compounds (DCTM1-DCTM6) having D1-π1-D2-π2-A configuration were designed using a reference molecule (DCTMR) via incorporating pyrrole rings (n = 1-5) as the π-spacer (π2). Quantum chemical calculations were performed to determine the impact of the pyrrole ring on the nonlinear optical (NLO) behavior of the above-mentioned chromophores. The optoelectronic properties of the compounds were determined at the MW1PW91/6-311G(d,p) functional. Among all of the derivatives, DCTM5 exhibited the least highest occupied molecular orbital-lowest unoccupied molecular orbital (HOMO-LUMO) band gap (Eg) 0.968 eV with a high softness of 0.562 eV-1, and hence possessed the highest polarizability. Interestingly, transition density matrix (TDM) findings demonstrated that DCTM5 with an effective diagonal charge transmission proportion at the acceptor group supports the frontier molecular orbital (FMO) results. Additionally, the exciton binding energy values for DCTM1-DCTM6 were found to be less than that for DCTMR and thus, the effective charge transfer was examined in the derivatives. All of the derivatives exhibited effective NLO outcomes with the highest magnitude of linear polarizability ⟨α⟩, and first (βtot) and second (γtot) hyperpolarizabilities relative to the parent compound. Nevertheless, the highest βtot and γtot were obtained for DTCM1 and DTCM6, 7.0440 × 10-27 and 22.260 × 10-34 esu, respectively. Hence, through this structural tailoring with a pyrrole spacer, effective NLO materials can be obtained for optoelectronic applications.

Giant NLO response and deep ultraviolet transparency of dual (alkali/alkaline earth) metals doped C6O6Li6 electrides

The designing of new materials having outstanding nonlinear optical (NLO) response is much needed for use in latest optics. Herein, the geometric, electronic and NLO properties of alkali and alkaline earth metals doped C6O6Li6 (alk-C6O6Li6-alkearth, alkearth = Ca, Mg, Be and alk = K, Na, Li) electrides is studied via quantum chemical approach. The interaction energies (Eint) are examined to illustrate their thermodynamic stability. The strong interaction energy of -39.99 kcal mol-1 is observed for Ca-C6O6Li6-Li electride in comparison to others. Frontier molecular orbitals (FMOs) energy gap of considered complexes is changed due to the electronic density shifting between metals and C6O6Li6 surface, which notifies the semi conducting properties of these electrides. The FMOs isodensities and natural bond orbital (NBO) charge analysis are performed to justify charge transfer between dopants and complexant. UV-Visible study also confirmed the application of these electrides as deep ultra-violet laser devices. NLO response is studied through calculation of first hyperpolarizability (βo). The highest βo value of 1.68 × 105 au is calculated for Mg-C6O6Li6-K electride. NLO response is further rationalized by three- and two-level models approach.

Geometric, Electronic, and Optoelectronic Properties of Carbon-Based Polynuclear C3O[C(CN)2]2M3 (where M = Li, Na, and K) Clusters: A DFT Study

Carbon-based polynuclear clusters are designed and investigated for geometric, electronic, and nonlinear optical (NLO) properties at the CAM-B3LYP/6-311++G(d,p) level of theory. Significant binding energies per atom (ranging from -162.4 to -160.0 kcal mol^-1) indicate excellent thermodynamic stabilities of these polynuclear clusters. The frontier molecular orbital (FMOs) analysis indicates excess electron nature of the clusters with low ionization potential, suggesting that they are alkali-like. The decreased energy gaps (E_H-L) with increased alkali metals size revael the improved electrical conductivity (σ). The total density of state (TDOS) study reveals the alkali metals' size-dependent electronic and conductive properties. The significant first and second hyperpolarizabilities are observed up to 5.78 × 10³ and 5.55 × 10⁶ au, respectively. The β_o response shows dependence on the size of alkali metals. Furthermore, the absorption study shows transparency of these clusters in the deep-UV, and absorptions are observed at longer wavelengths (redshifted). The optical gaps from TD-DFT are considerably smaller than those of HOMO-LUMO gaps. The significant scattering hyperpolarizability (β_HRS) value (1.62 × 10⁴) is calculated for the C3 cluster, where octupolar contribution to β_HRS is 92%. The dynamic first hyperpolarizability β(ω) is more pronounced for the EOPE effect at 532 nm, whereas SHG has notable values for second hyperpolarizability γ(ω).

Transition metalides based on facially polarized all-cis-1,2,3,4,5,6-hexafluorocyclohexane - a new class of high performance second order nonlinear optical materials

Continuous attempts are being made to discover new approaches to design materials with extraordinary nonlinear optical responses. Herein, for the first time, we report the geometric, electronic, and nonlinear optical properties of novel Janus transition metalides AM-J-TM (where AM = Li, Na and K, and TM = Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, and Zn) containing alkali metals as a source of excess electrons for transition metals to generate metalides. The Janus organic complexant used for the study is all cis 1,2,3,4,5,6-hexafluorocyclohexane F₆C₆H₆ (J). These complexes contain the unique involvement of alkali metals (AM = Li, Na and K) as a source of excess electrons, which significantly affects the hyperpolarizability values of the resulting transition metalides. The NBO analysis reveals the charge transfer from alkali metals to the transition metals, thereby confirming the metalide behavior of the complexes. Moreover, the metalide nature of these complexes is validated through frontier molecular orbital (FMO) analysis. The values of interaction energies, vertical ionization potential (VIP) and vertical electron affinity (VEA) illustrate the stability of the metalide complexes. Ultimately, the hyperpolarizability values confirm the excellent nonlinear optical response of the designed transition metalides. The remarkable static first hyperpolarizability (β₀) response up to 4 × 10⁸ a.u. is observed for complexes of vanadium. Similarly, the complexes of AM-J-Mn and Li/Na-J-Sc show significantly high NLO response. These compounds besides providing a new entry into excess electron compounds will also pave the way for the design and synthesis of further novel NLO materials.

Role of donors in triggering second order non-linear optical properties of non-fullerene FCO-2FR1 based derivatives: A theoretical perspective

The organic compounds are known as an emerging class in the field of nonlinear optical (NLO) materials. In this paper, D-π-A configured oxygen containing organic chromophores (FD2-FD6) were designed by incorporating various donors in the chemical structure of FCO-2FR1. This work is also inspired by the feasibility of FCO-2FR1 as an efficient solar cell. Theoretical approach involving DFT functional i.e., B3LYP/6-311G(d,p) was utilized to achieve useful information regarding their electronic, structural, chemical and photonic properties. The structural modifications revealed significant electronic contribution in designing HOMOs and LUMOs for the derivatives with lowered energy gaps. The lowest HOMO-LUMO band gap obtained was 1.223 eV for FD2 compound in comparison to the reference molecule (FCO-2FR1) i.e., 2.053 eV. Moreover, the DFT findings revealed that the end-capped substituents play a key role in enhancing the NLO response of these push-pull chromophores. The UV-Vis spectra of tailored molecules revealed larger λ _max values than the reference compound. Furthermore, strong intramolecular interactions showed the highest stabilization energy (28.40 kcal mol^-1) for FD2 in the natural bond orbitals (NBOs) transitions, combined with the least binding energy (-0.432 eV). Successfully, the NLO results were favorable for the same chromophore (FD2) which showed the highest value for dipole moment (μ _tot = 20.049 D) and first hyper-polarizability (β _tot = 11.22 × 10^-27 esu). Similarly, the largest value for linear polarizability ⟨α⟩ was obtained as 2.936 × 10^-22 esu for FD3 compound. Overall, the designed compounds were calculated with greater NLO values as compared to FCO-2FR1. The current study may provoke the researchers towards designing of highly efficient NLO materials via using the suitable organic linking species.

Theoretical Study of Alkaline-Earth Metal (Be, Mg, and Ca)-Substituted Aluminum Nitride Nanocages With High Stability and Large Nonlinear Optical Responses

By replacing one Al or N atom of aluminum nitride nanocage Al12N12 with an alkaline-earth metal atom, two series of compounds, namely, M@Al12N11 and M@Al11N12 (M = Be, Mg, and Ca), were constructed and investigated in theory. The substituted effect of alkaline-earth metal on the geometric structure and electronic properties of Al12N12 is studied in detail by density functional theory (DFT) methods. The calculated binding energies, HOMO–LUMO gaps, and VIE values of these compounds reveal that they possess high stability, though the NBO and HOMO analyses show that they are also excess electron compounds. Due to the existence of diffuse excess electrons, these alkaline-earth metal-substituted compounds exhibit larger first hyperpolarizabilities (β0) than pure Al12N12 nanocage. In particular, these considered compounds exhibit satisfactory infrared (IR) (>1800 nm) and ultraviolet (UV) (˂ 250 nm) transparency. Therefore, these proposed excess electron compounds with high stability may be regarded as potential candidates for new UV and IR NLO molecules.

Quantum design of transition metals decorated on boron phosphide inorganic nanocluster for Favipiravir adsorption: a possible treatment for COVID-19

Herein, a quantum drug delivery design of transition metals decorated on boron phosphide (B12P12) inorganic nanocage for favipiravir adsorption has been presented. Thus, these systems may facilitate us as COVID-19 therapy.

Design a novel type of excess electron compounds with large nonlinear optical responses using group 12 elements (Zn, Cd and Hg)

Based on the interesting Janus-type all-cis1,2,3,4,5,6-hexafluorocyclohexane (1) molecule, a novel type of excess electron compounds MF-1-MH (MF = Li, Na and K, MH = Zn, Cd and Hg) were designed theoretically. The geometric structures, electronic structures and nonlinear optical properties of MF-1-MH compounds were studied by density functional theory. Our results show that in Li-1-MH, the obvious charge transfer between Li and MH can be observed while in Na/K-1-MH, the charge transfer between Na/K and MH is negligible. Particularly, the MF-1-MH exhibit remarkable nonlinear optical (NLO) response and the first hyperpolarizability of the K-1-Zn almost achieve 1.0 × 10⁶ au. We hope this work will further enrich the family of excess electron compounds, so that more experimental interests and efforts can be attracted to propose and synthesize new excellent NLO materials.

Oxacarbon superalkali C3X3Y3 (X = O, S and Y = Li, Na, K) clusters as excess electron compounds for remarkable static and dynamic NLO response

An intriguing class of excess electron oxacarbon superalkali clusters is explored for nonlinear optical response through density functional theory (DFT) methods at CAM-B3LYP/6-311++G(d,p). These superalkali clusters shows noticeable binding energies per atom (E_b) which reveals their thermodynamic stabilities (-86.45 ∼ -119.44 kcal mol^-1). The obtained significant VIPs values also suggest the electronic stability of these clusters. The VIP values range from 2.06 eV to 3.42 eV. These clusters show remarkable electronic properties and their HOMO-LUMO gaps (E_H-L) are significantly reduced. The lowest H-L gap of 0.96 eV is obtained for C₃O₃K₃ while the highest H-L gap of 2.07 eV is calculated for C₃S₃Li₃. The obtained PDOS spectra further provide evidence for the superior electronic properties of these clusters. The clusters show excellent nonlinear optical properties as revealed from remarkable values (1.6 × 10⁶ au) of static first hyperpolarizability. The controlling factors for hyperpolarizability are also explored by using conventional two-level model. The calculated values of β_o are correlated nicely with β_tl. The crucial excitation energy is the key factor in controlling the first hyperpolarizability. In these excess electron clusters, the second hyperpolarizability (γ_o) response increases up to 4.3 × 10⁹ au. Moreover, the calculated scattering hyperpolarizability (β_HRS) values are quite significant in these clusters and the highest value of 1.3 × 10⁶ au is calculated for C₃S₃K₃. Additionally, these clusters also possess larger dynamic nonlinearities. The dynamic second hyperpolarizability with dc-Kerr effect increases up to 1.0 × 10¹¹ au. The remarkable values for refractive index (n₂) also suggest the excellent nonlinearity of these superalkali clusters.

Coinage metalides: a new class of excess electron compounds with high stability and large nonlinear optical responses

The possibility of using coinage metal atoms as excess electron acceptors is examined for the first time by designing a new class of M⁺-1-M'^- (M = Li, Na, and K; M' = Cu, Ag, and Au) compounds termed "coinage metalides" on the basis of an intriguing Janus-type all-cis1,2,3,4,5,6-hexafluorocyclohexane (1) molecule. Under the large facial polarization of 1, the outermost ns¹ electrons of alkali metal atoms can be transferred to coinage metal atoms, forming diffuse excess electrons around them. Consequently, the resulting M⁺-1-Cu^- and M⁺-1-Ag^- compounds exhibit significantly large nonlinear optical (NLO) responses. In particular, these novel M⁺-1-M'^- compounds exhibit much higher stability (larger VIEs and E_c values) than that of the corresponding M⁺·1·M'^- (M, M' = Li, Na, and K) alkalides. We hope this work could open up new possibilities for NLO material design by using coinage metal atoms as excess electron acceptors and, on the other hand, attract more experimental interest and efforts to synthesize such stable compounds in the laboratory.

Designing a new class of excess electron compounds with unique electronic structures and extremely large non-linear optical responses

New Ca⁺-1-M′⁻ (M′ = Li, Na, and K) compounds with typical alkalide features and electride-like characteristics have been obtained.

Redox-triggered switch based on platinum(ii) acetylacetonate complexes bearing an isomeric donor–acceptor conjugation ligand shows a high second-order nonlinear optical response

Pt(ii) acetylcetonate complexes with an isomeric D–A ligand exhibiting exceptionally large hyperpolarizabilities are promising redox-triggered NLO switches.

Electronic structure and large second-order non-linear optical property of COT derivatives - a theoretical exploration

A new strategy to design new molecules based on a fused hydrocarbon ring system comprising a COT ring and two 5-membered rings has been proposed for the study of second order NLO properties. The four charge transferring groups -NR2 (R = H, Li, Na and K) in conjunction with a sufficient number of electron withdrawing groups lead to significant variation of structural parameters and polarity. The charge transfer characteristics can be strongly modulated by introducing calcium metal atoms at suitable sites. Ca metal atoms end-capping the nitrogen ends of two adjacent -CN groups lead to electride character while a Ca metal atom bonded directly to the COT ring leads to greater charge transfer. The size of the alkali metal atom has been found to have a dramatic effect on the enhancement of first hyperpolarizability. The most significant electronic asymmetry induced by the larger potassium metal atom strongly enhances the magnitude of first hyperpolarizability. The variation of first hyperpolarizability has been satisfactorily explained in terms of TD-CAMB3LYP calculated spectroscopic parameters in light of the two-state model.

A theoretical study on the structures and electronic and magnetic properties of new boron nitride composite nanosystems by depositing superhalogen Al13 on the surface of nanosheets/nanoribbons

Inorganic boron nitride (BN) nanomaterials possess outstanding physical and chemical characteristics, and can be considered as an excellent building block to construct new composite nanomaterials. In this work, on the basis of the first-principles computations, a new type of composite nanostructure can be constructed by depositing superhalogen Al13 on the surface of low-dimensional BN monolayer or nanoribbons (BNML/BNNRs). All these Al13-modified BN nanosystems can possess large adsorption energies, indicating that superhalogen Al13 can be stably adsorbed on the surface of these BN materials. In particular, it is revealed that independent of the chirality, ribbon width and adsorption site, introducing superhalogen Al13 can endow the BN-based composite systems with a magnetic ground state with a magnetic moment of about 1.00 μB, and effectively narrow their robust wide band gaps. These new superhalogen-Al13@BN composite nanostructures, with magnetism and an appropriate band gap, can be very promising to be applied in multifunctional nanodevices in the near future.

Static second hyperpolarizability of inverse sandwich compounds (M1-C5H5-M2) of alkali (M1 = Li, Na, K) and alkaline earth metals (M2 = Be, Mg, Ca)

In the investigated inverse sandwich complexes, charge transfer from alkali metal (M1) led to aromatically stabilized Cp ring, which prevented further charge transfer from the alkaline earth metal (M2). This electron push effect resulted in diffusion of electron density from the outermost "ns" subshell of alkaline earth metal. The alkaline earth metal is weakly bound to the alkali metal-C5H5 complex. The vertical ionization energy of the chosen M1-Cp-M2 complexes was smaller than that of the corresponding alkaline earth metals. Large second hyperpolarizability (106-108 a.u.) was obtained for the studied molecules. The correction due to the basis set superposition error (BSSE) in the calculated second hyperpolarizability was found to be small for larger systems, while it was rather significant for small systems. The MP4SDQ and CCSD results were in fair agreement, which indicates the necessity of higher order electron correlation treatment in the accurate description of second hyperpolarizability. Calculated dynamic second hyperpolarizabilities at 1064 nm were found to increase considerably for most of the chosen metal complexes.

Successive lithiation of acetylene, ethylene and benzene: a comprehensive computational study of large static second hyperpolarizability

This work is a revisit of the study of the electron correlation effect of lithium substitution on the second hyperpolarizability (10⁶ a.u.) of acetylene, ethylene and benzene. The large quenching of mean second hyperpolarizability has been addressed by CCSD calculations. The inclusion of triple excitation in the MP4 method generally overestimates second hyperpolarizability in comparison to the MP4SDQ method. The present CCSD γ_av value of C₆Li₆: 405 × 10⁴ a.u. obtained with a relatively larger basis set established the earlier prediction of Sadlej et al. [Phys. Chem. Phys. Chem., 2000, 2, 3393-3399] where degenerate non-dipolar transitions in low lying excited states play the crucial role. The successive lithiation results in gradual red shifting of transition energy leading to significant enhancement of second hyperpolarizability. Most of the chosen DFT functionals predict the correct qualitative trend of second hyperpolarizability. The quantitatively different results may be attributed to the case when the ground state wave function cannot be approximated by a single SD.

Transition metal doping: a new and effective approach for remarkably high nonlinear optical response in aluminum nitride nanocages

NLO response of early transition metal (Sc)-doped aluminum nitride nanocages is comparable to those of their alkali-metal-doped analogues.

Substituent effects on the electronic structures and nonlinear optical properties of Li-doped nano-carbon bowl

A series of Li-corannulene-(NH₂)_n and Li-corannulene-(NO₂)_n (n = 1, 2, 5) compounds have been theoretically designed and investigated using density functional theory. In this work, two models are systematically investigated to explore the important factors for enhancing the static first hyperpolarizability by introducing the substitution group. It is revealed that energy gaps (E_gap) between highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) of all compounds are in the range of 4.149-4.934 eV. Different DFT methods are adopted to calculate polarizabilities and the first hyperpolarizabilities of Li-corannulene-(NH₂)_n and Li-corannulene-(NO₂)_n (n = 1, 2, 5) compounds. It is revealed that polarizability values of the systems increase with increasing number of NH₂/NO₂ substitution group. Moreover, it is found that the first hyperpolarizabilities of Li-corannulene-(NO₂)_n are larger than those of Li-corannulene-(NH₂)_n, which can be attributed to the lower transition energies. In contrast to the NH₂ substitution group, NO₂ substitution group can be more powerful in increasing the first hyperpolarizability of Li-doped corannulene. We hope that this study can provide a new idea for designing nonlinear optical materials using the NH₂ and NO₂ groups.

Carbon-Based Oxamate Cobalt(III) Complexes as Bioenzyme Mimics for Contaminant Elimination in High Backgrounds of Complicated Constituents

Complex wastewater with massive components is now a serious environmental issue facing humanity. Selective removal of low-concentration contaminants in mixed constituents holds great promise for increasing water supplies. Bioenzymes like horseradish peroxidase exhibit oxidizing power and selectivity. Here, we manufactured its mimic through immobilizing non-heme oxamate anionic cobalt(III) complex ([Co^III(opba)]⁻, opba = o-phenylenebis(oxamate)) onto pyridine (Py) modified multiwalled carbon nanotubes ([Co^III(opba)]⁻-Py-MWCNTs, MWCNTs = multiwalled carbon nanotubes), where MWCNTs captured substrates and Py functioned as the fifth ligand. We chose typical azo dye (C.I. Acid Red 1) and antibiotic (ciprofloxacin) as model substrates. Without •OH, this catalyst could detoxify target micropollutants efficiently at pH from 8 to 11. It also remained efficient in repetitive tests, and the final products were non-poisonous OH-containing acids. Combined with radical scavenger tests and electron paramagnetic resonance result, we speculated that high-valent cobalt-oxo active species and oxygen atom transfer reaction dominated in the reaction pathway. According to density functional theory calculations, the electron spin density distribution order showed that electron-withdrawing ligand was beneficial for inward pulling the excess electron and lowering the corresponding energy levels, achieving an electrophilic-attack enhancement of the catalyst. With target removal property and recyclability, this catalyst is prospective in water detoxication.

A comparative theoretical study on the electrical and nonlinear optical properties of Li atom adsorbed on AlN and BN single-walled nanotubes

The geometrical structures, electrical properties, and nonlinear optical (NLO) properties of AlNNT-Li and BNNT-Li nanotube systems were investigated by means of the density functional theory (DFT) method. Frontier molecular orbitals and density of states analyses show that adsorption of the Li atom can significantly narrow the wide HOMO-LUMO gaps of pure AlNNT and BNNT. The results reveal that AlNNT-Li and BNNT-Li systems containing diffuse excess electrons can be regarded as inorganic electrides. The formation of diffuse excess electrons leads to a decrease in transition energies, thereby increasing the first hyperpolarizabilities (β ₀) of AlNNT-Li and BNNT-Li. This work may contribute to the development of potential high-performance NLO materials. Graphical abstract The structural characteristics and nonlinear optical properties of the AlNNT-Li and BNNT-Li systems were studied by means of density functional theory. Introduction of Li atoms greatly enhances the static first hyperpolarizabilities of AlNNT-Li and BNNT-Li.

The influence of Sc doping on structural, electronic and optical properties of Be12O12, Mg12O12 and Ca12O12 nanocages: a DFT study

Density functional theory (DFT) calculations were used to study the effect of scandium doping on the structural, energetic, electronic, linear and nonlinear optical (NLO) properties of Be₁₂O₁₂, Mg₁₂O₁₂ and Ca₁₂O₁₂ nanoclusters. Scandium (Sc) doping on nanoclusters leads to narrowing of their E _g, which enhances their conductance greatly. Also, the polarizability (α) and first hyperpolarizability (β₀) of nanoclusters were dramatically increased as Be, Mg or Ca atoms are substituted with a Sc atom. Among all clusters, α and β₀ values for Sc-doped Ca₁₂O₁₂ were the largest. Consequently, the effect of the doping atom, as well as of cluster size, on electronic and optical properties was explored. Time dependent (TD)-DFT calculations were also carried out to confirm the β₀ values; the results show that the higher value of first hyperpolarizability belongs to Sc-doped Ca₁₂O₁₂, which has the smallest transition energy (ΔEgn). The results obtained show that these clusters can be candidates for using in electronic devices and NLO materials in industry.

Theoretical Study of the Substituent Effects on the Nonlinear Optical Properties of a Room-Temperature-Stable Organic Electride

Excess-electron compounds can be considered as novel candidates for nonlinear optical (NLO) materials because of their large static first hyperpolarizabilities (β₀ ). A room-temperature-stable, excess-electron compound, that is, the organic electride Na@(TriPip222), was successfully synthesized by the Dye group (J. Am. Chem. Soc. 2005, 127, 12416). In this work, the β₀ of this electride was first evaluated to be 1.13×10⁶  au, which revealed its potential as a high-performance NLO material. In particular, the substituent effects of different substituents on the structure, electride character, and NLO response of this electride were systemically studied for the first time by density functional theory calculations. The results revealed that the β₀ of Na@(TriPip222) could be further increased to 8.30×10⁶  au by introducing a fluoro substituent, whereas its NLO response completely disappeared if one nitryl group was introduced because the nitro-group substitution deprived the material of its electride identity. Moreover, herein the dependence of the NLO properties on the number of substituents and their relative positions was also detected in multifluoro-substituted Na@(TriPip222) compounds.

Connecting effect on the first hyperpolarizability of armchair carbon-boron-nitride heteronanotubes: pattern versus proportion

Carbon-boron-nitride heteronanotubes (BNCNT) have attracted a lot of attention because of their adjustable properties and potential applications in many fields. In this work, a series of CA, PA and HA armchair BNCNT models were designed to explore their nonlinear optical (NLO) properties and provide physical insight into the structure-property relationships; CA, PA and HA represent the models that are obtained by doping the carbon segment into pristine boron nitride nanotube (BNNT) fragments circularly around the tube axis, parallel to the tube axis and helically to the tube axis, respectively. Results show that the first hyperpolarizability (β0) of an armchair BNCNT model is dramatically dependent on the connecting patterns of carbon with the boron nitride fragment. Significantly, the β0 value of PA-6 is 2.00 × 10(4) au, which is almost two orders of magnitude larger than those (6.07 × 10(2) and 1.55 × 10(2) au) of HA-6 and CA-6. In addition, the β0 values of PA and CA models increase with the increase in carbon proportion, whereas those of HA models show a different tendency. Further investigations on transition properties show that the curved charge transfer from N-connecting carbon atoms to B-connecting carbon atoms of PA models is essentially the origin of the big difference among these models. This new knowledge about armchair BNCNTs may provide important information for the design and preparation of advanced NLO nano-materials.

All-metal electride molecules CuAg@Ca7M (M = Be, Mg, and Ca) with multi-excess electrons and all-metal polyanions: molecular structures and bonding modes as well as large infrared nonlinear optical responses

All-metal electride molecules, CuAg@Ca₇M (M = Be, Mg and Ca), have been designed and researched in theory for the first time.

Theoretical study of the non linear optical properties of alkali metal (Li, Na, K) doped aluminum nitride nanocages

The effect of alkali metal (Li, Na, and K) doping in aluminum nitride (Al₁₂N₁₂) nanocages is studied through density functional theory (DFT) methods.