3-Orders-of-magnitude density control of single-walled carbon nanotube networks by maximizing catalyst activation and dosing carbon supply

Plasma treatment for next-generation nanobiointerfaces

Energy deficiency, global poverty, chronic hunger, chronic diseases, and environment conservation are among the major problems threatening the whole mankind. Nanostructure-based technologies could be a possible solution. Such techniques are now used for the production of many vitally important products including cultured and fermented food, antibiotics, various medicines, and biofuels. On the other hand, the nanostructure-based technologies still demonstrate low efficiency and controllability, and thus still are not capable to decisively address the global problems. Furthermore, future technologies should ensure lowest possible environmental impact by implementing green production principles. One of the most promising approaches to address these challenges are the sophisticatedly engineered biointerfaces. Here, the authors briefly evaluate the potential of the plasma-based techniques for the fabrication of complex biointerfaces. The authors consider mainly the atmospheric and inductively coupled plasma environments and show several examples of the artificial plasma-created biointerfaces, which can be used for the biotechnological and medical processes, as well as for the drug delivery devices, fluidised bed bioreactors, catalytic reactors, and others. A special attention is paid to the plasma-based treatment and processing of the biointerfaces formed by arrays of carbon nanotubes and graphene flakes.

Carbon nanotubes on nanoporous alumina: from surface mats to conformal pore filling

Control over nucleation and growth of multi-walled carbon nanotubes in the nanochannels of porous alumina membranes by several combinations of posttreatments, namely exposing the membrane top surface to atmospheric plasma jet and application of standard S1813 photoresist as an additional carbon precursor, is demonstrated. The nanotubes grown after plasma treatment nucleated inside the channels and did not form fibrous mats on the surface. Thus, the nanotube growth mode can be controlled by surface treatment and application of additional precursor, and complex nanotube-based structures can be produced for various applications. A plausible mechanism of nanotube nucleation and growth in the channels is proposed, based on the estimated depth of ion flux penetration into the channels.

PACS

63.22.Np Layered systems; 68. Surfaces and interfaces; Thin films and nanosystems (structure and non-electronic properties); 81.07.-b Nanoscale materials and structures: fabrication and characterization.

Synergistic fusion of vertical graphene nanosheets and carbon nanotubes for high-performance supercapacitor electrodes

Graphene and carbon nanotubes (CNTs) are attractive electrode materials for supercapacitors. However, challenges such as the substrate-limited growth of CNTs, nanotube bundling in liquid electrolytes, under-utilized basal planes, and stacking of graphene sheets have so far impeded their widespread application. Here we present a hybrid structure formed by the direct growth of CNTs onto vertical graphene nanosheets (VGNS). VGNS are fabricated by a green plasma-assisted method to break down and reconstruct a natural precursor into an ordered graphitic structure. The synergistic combination of CNTs and VGNS overcomes the challenges intrinsic to both materials. The resulting VGNS/CNTs hybrids show a high specific capacitance with good cycling stability. The charge storage is based mainly on the non-Faradaic mechanism. In addition, a series of optimization experiments were conducted to reveal the critical factors that are required to achieve the demonstrated high supercapacitor performance.

Plasma-Enabled Carbon Nanostructures for Early Diagnosis of Neurodegenerative Diseases

Carbon nanostructures (CNs) are amongst the most promising biorecognition nanomaterials due to their unprecedented optical, electrical and structural properties. As such, CNs may be harnessed to tackle the detrimental public health and socio-economic adversities associated with neurodegenerative diseases (NDs). In particular, CNs may be tailored for a specific determination of biomarkers indicative of NDs. However, the realization of such a biosensor represents a significant technological challenge in the uniform fabrication of CNs with outstanding qualities in order to facilitate a highly-sensitive detection of biomarkers suspended in complex biological environments. Notably, the versatility of plasma-based techniques for the synthesis and surface modification of CNs may be embraced to optimize the biorecognition performance and capabilities. This review surveys the recent advances in CN-based biosensors, and highlights the benefits of plasma-processing techniques to enable, enhance, and tailor the performance and optimize the fabrication of CNs, towards the construction of biosensors with unparalleled performance for the early diagnosis of NDs, via a plethora of energy-efficient, environmentally-benign, and inexpensive approaches.

SWCNT networks on nanoporous silica catalyst support: morphological and connectivity control for nanoelectronic, gas-sensing, and biosensing devices

Effective control of morphology and electrical connectivity of networks of single-walled carbon nanotubes (SWCNTs) by using rough, nanoporous silica supports of Fe catalyst nanoparticles in catalytic chemical vapor deposition is demonstrated experimentally. The very high quality of the nanotubes is evidenced by the G-to-D Raman peak ratios (>50) within the range of the highest known ratios. Transitions from separated nanotubes on smooth SiO(2) surface to densely interconnected networks on the nanoporous SiO(2) are accompanied by an almost two-order of magnitude increase of the nanotube density. These transitions herald the hardly detectable onset of the nanoscale connectivity and are confirmed by the microanalysis and electrical measurements. The achieved effective nanotube interconnection leads to the dramatic, almost three-orders of magnitude decrease of the SWCNT network resistivity compared to networks of similar density produced by wet chemistry-based assembly of preformed nanotubes. The growth model, supported by multiscale, multiphase modeling of SWCNT nucleation reveals multiple constructive roles of the porous catalyst support in facilitating the catalyst saturation and SWCNT nucleation, consistent with the observed higher density of longer nanotubes. The associated mechanisms are related to the unique surface conditions (roughness, wettability, and reduced catalyst coalescence) on the porous SiO(2) and the increased carbon supply through the supporting porous structure. This approach is promising for the direct integration of SWCNT networks into Si-based nanodevice platforms and multiple applications ranging from nanoelectronics and energy conversion to bio- and environmental sensing.

Uniform, dense arrays of vertically aligned, large-diameter single-walled carbon nanotubes

Precisely controlled reactive chemical vapor synthesis of highly uniform, dense arrays of vertically aligned single-walled carbon nanotubes (SWCNTs) using tailored trilayered Fe/Al(2)O(3)/SiO(2) catalyst is demonstrated. More than 90% population of thick nanotubes (>3 nm in diameter) can be produced by tailoring the thickness and microstructure of the secondary catalyst supporting SiO(2) layer, which is commonly overlooked. The proposed model based on the atomic force microanalysis suggests that this tailoring leads to uniform and dense arrays of relatively large Fe catalyst nanoparticles on which the thick SWCNTs nucleate, while small nanotubes and amorphous carbon are effectively etched away. Our results resolve a persistent issue of selective (while avoiding multiwalled nanotubes and other carbon nanostructures) synthesis of thick vertically aligned SWCNTs whose easily switchable thickness-dependent electronic properties enable advanced applications in nanoelectronic, energy, drug delivery, and membrane technologies.

Controlling the growth morphology of carbon nanotubes: from suspended bridges to upright forests

We have developed two strategies to produce carbon nanotubes (CNTs) from low-density surface growth to high-density forest growth. We have demonstrated that by introducing a C(2)H(2) pulse at the beginning of the growth, where methane is still used as the main carbon feeding gas, the growth tendency of CNTs can be changed and the resulting growth morphology will vary from surface growth to forest growth. Similarly, the growth morphology can be changed when the growth temperature is raised. The further characterization via Raman spectroscopy indicates that an increasing C(2)H(2) pulse time will lead to a rise of the D peak for as-grown CNTs, due to the formation of more multi-walled CNTs and the amorphous carbon contamination introduced by extra C(2)H(2), while a high growth temperature tends to produce high-quality CNTs and to reduce the amorphous carbon contamination. Furthermore, by appropriately adjusting the growth temperature and controlling the C(2)H(2) pulse time, we have managed to produce both suspended CNT bridges and upright forests within a single growth procedure and to form suspended pristine CNT transistors with a relatively high yield. In addition, the electrical properties of these CNT nanostructures have been investigated by electrical transport and scanning photocurrent measurements.