Heterogeneous core-shell Co2(PS3)@Co2P nanowires with accelerated surface reconstruction for efficient electrocatalytic seawater oxidation

The design of pre-catalysts and the rational manipulation of corresponding electrochemical reconstruction are vitally important to construct the highly durable and active catalysts for seawater oxidation, but rather challenging. Herein, a novel core-shell catalyst of Co2(PS3)@Co2P (labeled as CoPS) by epitaxial growth of amorphous cobalt phosphide (Co2P) on crystalline cobalt phosphorous trichalcogenide (Co2(PS3)) is firstly designed as a pre-catalyst for alkaline seawater oxidation. Various characterization techniques are employed to demonstrate that the unique amorphous-crystalline nanowire structure (CoPS) achieves the rapid surface reconstruction into active CoOOH and diversiform oxyanions species (labeled as CoPS-R). Theoretical simulations uncover that the in situ derived oxyanions (PO42-, SO32- and SO42-) on the surface of CoOOH can tune the electron distribution of Co site, thereby optimizing the chemisorption of oxygen evolution reaction (OER) intermediates on CoOOH and reducing the energy barrier of determining step. Consequently, in an alkaline natural seawater solution, the reconstructed CoPS-R catalyst exhibits small overpotentials of 357 and 402 mV for OER at 200 and 500 mA cm-2, respectively, together with an impressive durability over 500 h at a large current density of 500 mA cm-2 benefiting from the strong repulsive effect of the derived PO42-, SO32- and SO42- oxyanions. This work offers a new insight for comprehending the relationship of structure-composition-activity and develops a new approach toward the construction of efficient and robust OER catalysts for seawater electrolysis.

Covalent versus noncovalent attachments of [FeFe]‑hydrogenase models onto carbon nanotubes for aqueous hydrogen evolution reaction

In an effort to develop the biomimetic chemistry of [FeFe]‑hydrogenases for catalytic hydrogen evolution reaction (HER) in aqueous environment, we herein report the integrations of diiron dithiolate complexes into carbon nanotubes (CNTs) through three different strategies and compare the electrochemical HER performances of the as-resulted 2Fe2S/CNT hybrids in neutral aqueous medium. That is, three new diiron dithiolate complexes [{(μ-SCH2)2N(C6H4CH2C(O)R)}Fe2(CO)6] (R = N-oxylphthalimide (1), NHCH2pyrene (2), and NHCH2Ph (3)) were prepared and could be further grafted covalently to CNTs via an amide bond (this 2Fe2S/CNT hybrid is labeled as H1) as well as immobilized noncovalently to CNTs via π-π stacking interaction (H2) or via simple physisorption (H3). Meanwhile, the molecular structures of 1-3 are determined by elemental analysis and spectroscopic as well as crystallographic techniques, whereas the structures and morphologies of H1-H3 are characterized by various spectroscopies and scanning electronic microscopy. Further, the electrocatalytic HER activity trend of H1 > H2 ≈ H3 is observed in 0.1 M phosphate buffer solution (pH = 7) through different electrochemical measurements, whereas the degradation processes of H1-H3 lead to their electrocatalytic deactivation in the long-term electrolysis as proposed by post operando analysis. Thus, this work is significant to extend the potential application of carbon electrode materials engineered with diiron molecular complexes as heterogeneous HER electrocatalysts for water splitting to hydrogen.

Manipulating Photoconduction in Supramolecular Networks for Solar-Driven Nitrate Conversion to Ammonia and Oxygen

For photoelectrodes to be used in practical catalytic applications, challenges exist in achieving the efficient production and transport of photogenerated charge-separated states. Analogous concepts in traditional inorganic photoelectrodes can be applied to their organic-polymer counterparts with improved charge-separation efficiencies. In this work, we develop photoconductive organic networks to form a high-performance photoelectrode for NO3- reduction to NH3. In the integrated network, interfaces between the organic electron-donating photoconductor and electron-accepting catalyst can generate charge carriers efficiently upon illumination, leading to enhanced charge separation for photoelectrocatalysis. The photoelectrode network is capable of converting NO3- to NH3 at an external quantum efficiency of 13%. By coupling with a BiVO4 photoanode in tandem, the system reduces NO3- to NH3 and oxidizes H2O to O2 simultaneously at Faradaic efficiencies of 95-98% with sustained photocurrents and production yields. Investigation of the photoconductive network by steady-state/time-resolved spectroscopies reveals the efficient generation and transport of free charge carriers in the photoelectrode, providing a basis for high photoelectrocatalytic performances.

Defect-rich W1-xMoxS2 solutions for efficient H2 evolution in acidic electrolytes

An optimal W0.4Mo0.6S2 solid solution, equipped with rich intrinsic defects, exhibits excellent stability in both 0.5 M H2SO4 and 2.0 M NaCl, showing negligible activity degradation after continuous 50 hours of working, thereby showing outstanding practical prospects.

Engineered Two-Dimensional Transition Metal Dichalcogenides for Energy Conversion and Storage

Designing efficient and cost-effective materials is pivotal to solving the key scientific and technological challenges at the interface of energy, environment, and sustainability for achieving NetZero. Two-dimensional transition metal dichalcogenides (2D TMDs) represent a unique class of materials that have catered to a myriad of energy conversion and storage (ECS) applications. Their uniqueness arises from their ultra-thin nature, high fractions of atoms residing on surfaces, rich chemical compositions featuring diverse metals and chalcogens, and remarkable tunability across multiple length scales. Specifically, the rich electronic/electrical, optical, and thermal properties of 2D TMDs have been widely exploited for electrochemical energy conversion (e.g., electrocatalytic water splitting), and storage (e.g., anodes in alkali ion batteries and supercapacitors), photocatalysis, photovoltaic devices, and thermoelectric applications. Furthermore, their properties and performances can be greatly boosted by judicious structural and chemical tuning through phase, size, composition, defect, dopant, topological, and heterostructure engineering. The challenge, however, is to design and control such engineering levers, optimally and specifically, to maximize performance outcomes for targeted applications. In this review we discuss, highlight, and provide insights on the significant advancements and ongoing research directions in the design and engineering approaches of 2D TMDs for improving their performance and potential in ECS applications.

Structural Aspects of MoS x Prepared by Atomic Layer Deposition for Hydrogen Evolution Reaction

Molybdenum sulfides (MoS x ) in both crystalline and amorphous forms are promising earth-abundant electrocatalysts for hydrogen evolution reaction (HER) in acid. Plasma-enhanced atomic layer deposition was used to prepare thin films of both amorphous MoS x with adjustable S/Mo ratio (2.8-4.7) and crystalline MoS2 with tailored crystallinity, morphology, and electrical properties. All the amorphous MoS x films transform into highly HER-active amorphous MoS2 (overpotential 210-250 mV at 10 mA/cm2 in 0.5 M H2SO4) after electrochemical activation at approximately -0.3 V vs reversible hydrogen electrode. However, the initial film stoichiometry affects the structure and consequently the HER activity and stability. The material changes occurring during activation are studied using ex situ and quasi in situ X-ray photoelectron spectroscopy. Possible structures of as-deposited and activated catalysts are proposed. In contrast to amorphous MoS x , no changes in the structure of crystalline MoS2 catalysts are observed. The overpotentials of the crystalline films range from 300 to 520 mV at 10 mA/cm2, being the lowest for the most defective catalysts. This work provides a practical method for deposition of tailored MoS x HER electrocatalysts as well as new insights into their activity and structure.

Constant potential energetics of metallic and semiconducting electrodes: A benchmark study on 2D materials

Grand-canonical (GC) constant-potential methods within an implicit solvent environment provide a general approach to compute the potential-dependent energetics at electrified solid-liquid interfaces with first-principles density-functional theory. Here, we use a mindfully chosen set of 27 isostructural 2D metal halides MX2 to analyze the variation of this energetics when the electronic structure changes from metallic to semiconducting and insulating state. Apart from expectable changes due to the opening up of the electronic bandgap, the calculations also show an increasing sensitivity to the numerical Brillouin zone integration and electronic smearing, which imposes computational burdens in practice. We rationalize these findings within the picture of the total interfacial capacitance arising from a series connection of the electrochemical double-layer capacitance and the so-called quantum capacitance resulting from the filling of electronic states inside the electrode. For metals, the electrochemical double-layer capacitance dominates at all potentials, and the entire potential drop takes place in the electrolyte. For semiconductors, the potential drop occurs instead fully or partially inside the electrode at potentials within or just outside the bandgap. For 2D semiconductors, the increased sensitivity to numerical parameters then results from the concomitantly increased contribution of the quantum capacitance that is harder to converge. Fortunately, this understanding motivates a simple extension of the CHE + DL approximation for metals, which provides the approximate GC energetics of 2D semiconductors using only quantities that can be obtained from computationally undemanding calculations at the point of zero charge and a generic double-layer capacitance.

In-situ fabrication of self-supported cobalt molybdenum sulphide on carbon paper for bifunctional water electrocatalysis

The fabrication of highly efficient yet stable noble-metal-free bifunctional electrocatalysts that can simultaneously catalyse both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) remains challenging. Herein, we employ the heterostructure coupling strategy, showcasing an aerosol-assisted chemical vapour deposition (AACVD) aided synthetic approach for the in-situ growth of cobalt molybdenum sulphide nanocomposites on carbon paper (CoMoS@CP) as a bifunctional electrocatalyst. The AACVD allows the rational incorporation of Co in the Mo-S binary structure, which modulates the morphology of CoMoS@CP, resulting in enhanced HER activity (ŋ10 = 171 mV in acidic and ŋ10 = 177 mV in alkaline conditions). Furthermore, the CoS2 species in the CoMoS@CP ternary structure extends the OER capability, yielding an ŋ100 of 455 mV in 1 M KOH. Lastly, we found that the synergistic effect of the Co-Mo-S interface elevates the bifunctional performance beyond binary counterparts, achieving a low cell voltage (1.70 V at 10 mA cm-2) in overall water splitting test and outstanding catalytic stability (∼90 % performance retention after 50-/30-h continuous operation at 10 and 100 mA cm-2, respectively). This work has opened up a new methodology for the controllable synthesis of self-supported transition metal-based electrocatalysts for applications in overall water splitting.

Precious Metal Free Hydrogen Evolution Catalyst Design and Application

The quest to identify precious metal free hydrogen evolution reaction catalysts has received unprecedented attention in the past decade. In this Review, we focus our attention to recent developments in precious metal free hydrogen evolution reactions in acidic and alkaline electrolyte owing to their relevance to commercial and near-commercial low-temperature electrolyzers. We provide a detailed review and critical analysis of catalyst activity and stability performance measurements and metrics commonly deployed in the literature, as well as review best practices for experimental measurements (both in half-cell three-electrode configurations and in two-electrode device testing). In particular, we discuss the transition from laboratory-scale hydrogen evolution reaction (HER) catalyst measurements to those in single cells, which is a critical aspect crucial for scaling up from laboratory to industrial settings but often overlooked. Furthermore, we review the numerous catalyst design strategies deployed across the precious metal free HER literature. Subsequently, we showcase some of the most commonly investigated families of precious metal free HER catalysts; molybdenum disulfide-based, transition metal phosphides, and transition metal carbides for acidic electrolyte; nickel molybdenum and transition metal phosphides for alkaline. This includes a comprehensive analysis comparing the HER activity between several families of materials highlighting the recent stagnation with regards to enhancing the intrinsic activity of precious metal free hydrogen evolution reaction catalysts. Finally, we summarize future directions and provide recommendations for the field in this area of electrocatalysis.

Regulation of Sulfur Atoms in MoSx by Magneto-Electrodeposition for Hydrogen Evolution Reaction

Compared with crystalline molybdenum sulfide (MoS2) employed as an efficient hydrogen evolution reaction (HER) catalyst, amorphous MoSx exhibits better activity. To synthesize amorphous MoSx, electrodeposition serving as a convenient and time-saving method is successfully applied. However, the loading mass is hindered by limited mass transfer efficiency and the available active sites require further improvement. Herein, magneto-electrodeposition is developed to synthesize MoSx with magnetic fields up to 9 T to investigate the effects of a magnetic field in the electrodeposition processing, as well as the induced electrochemical performance. Owing to the magneto-hydrodynamic effect, the loading mass of MoSx is obviously increased, and the terminal S2- serving as the active site is enhanced. The optimized MoSx catalyst delivers outstanding HER performance, achieving an overpotential of 50 mV at a current density of 10 mA cm-2 and the corresponding Tafel slope of 59 mV dec-1. The introduction of a magnetic field during the electrodeposition process will provide a novel route to prepare amorphous MoSx with improved electrochemical performance.

Allotrope-dependent activity-stability relationships of molybdenum sulfide hydrogen evolution electrocatalysts

Molybdenum disulfide (MoS2) is widely regarded as a competitive hydrogen evolution reaction (HER) catalyst to replace platinum in proton exchange membrane water electrolysers (PEMWEs). Despite the extensive knowledge of its HER activity, stability insights under HER operation are scarce. This is paramount to ensure long-term operation of Pt-free PEMWEs, and gain full understanding on the electrocatalytically-induced processes responsible for HER active site generation. The latter are highly dependent on the MoS2 allotropic phase, and still under debate. We rigorously assess these by simultaneously monitoring Mo and S dissolution products using a dedicated scanning flow cell coupled with downstream analytics (ICP-MS), besides an electrochemical mass spectrometry setup for volatile species analysis. We observe that MoS2 stability is allotrope-dependent: lamellar-like MoS2 is highly unstable under open circuit conditions, whereas cluster-like amorphous MoS3-x instability is induced by a severe S loss during the HER and undercoordinated Mo site generation. Guidelines to operate non-noble PEMWEs are therefore provided based on the stability number metrics, and an HER mechanism which accounts for Mo and S dissolution pathways is proposed.

Bifunctional Electrocatalysts for Overall and Hybrid Water Splitting

Electrocatalytic water splitting driven by renewable electricity has been recognized as a promising approach for green hydrogen production. Different from conventional strategies in developing electrocatalysts for the two half-reactions of water splitting (e.g., the hydrogen and oxygen evolution reactions, HER and OER) separately, there has been a growing interest in designing and developing bifunctional electrocatalysts, which are able to catalyze both the HER and OER. In addition, considering the high overpotentials required for OER while limited value of the produced oxygen, there is another rapidly growing interest in exploring alternative oxidation reactions to replace OER for hybrid water splitting toward energy-efficient hydrogen generation. This Review begins with an introduction on the fundamental aspects of water splitting, followed by a thorough discussion on various physicochemical characterization techniques that are frequently employed in probing the active sites, with an emphasis on the reconstruction of bifunctional electrocatalysts during redox electrolysis. The design, synthesis, and performance of diverse bifunctional electrocatalysts based on noble metals, nonprecious metals, and metal-free nanocarbons, for overall water splitting in acidic and alkaline electrolytes, are thoroughly summarized and compared. Next, their application toward hybrid water splitting is also presented, wherein the alternative anodic reactions include sacrificing agents oxidation, pollutants oxidative degradation, and organics oxidative upgrading. Finally, a concise statement on the current challenges and future opportunities of bifunctional electrocatalysts for both overall and hybrid water splitting is presented in the hope of guiding future endeavors in the quest for energy-efficient and sustainable green hydrogen production.

Efficient electrochemical hydrogen evolution activity of nanostructured Ag3PO4/MoS2 heterogeneous composite catalyst

Hydrogen (H2) generation by electrochemical water splitting is a key technique for sustainable energy applications. Two-dimensional (2D) transition-metal dichalcogenide (MoS2) and silver phosphate (Ag3PO4) possess excellent electrochemical hydrogen evolution reaction (HER) properties when they are combined together as a composite rather than individuals. Reports examining the HER activity by using Ag3PO4, especially, in combination with the 2D layered MoS2 are limited in literature. The weight fraction of MoS2 in Ag3PO4 is optimized for 1, 3, and 5 wt%. The Ag3PO4/1 wt % MoS2 combination exhibits enhanced HER activity with least overpotential of 235 mV among the other samples in the acidic medium. The synergistic effect of optimal nano-scale 2D layered MoS2 structure and Ag3PO4 is essential for creating higher electrochemical active surface area of 217 mF/cm2, and hence this leads to faster reaction kinetics in the HER. This work suggests the advantages of Ag3PO4/1 wt % MoS2 heterogeneous composite catalyst for electrochemical analysis and HER indicating lower resistivity and low Tafel slope value (179 mV/dec) among the prepared catalysts making it a promising candidate for its use in practical energy applications.

MoS2 nanoflower decorated bio-derived chitosan nanocomposites for sustainable energy storage: Structural, optical and electrochemical studies

Bio-derived chitosan-molybdenum di sulfide (Cs-MoS2) nanocomposites are prepared by a simple and economical aqueous casting method with varying concentrations of MoS2. The structural, surface morphological, optical, and electrochemical properties of the nanocomposites were studied. FTIR analysis reveals the strong interaction between Cs and MoS2. FESEM micrograph showed an increment of the surface roughness due to the incorporation of MoS2 layers into Cs. The surface wettability of the nanocomposites was found to be decreased from 73° to 33° due to the incorporation of MoS2 into the chitosan. UV-vis spectroscopy study demonstrates a reduction of optical bandgap from 4.29 to 3.44 eV as the nanofiller, MoS2, introduces localized states within the forbidden energy bandgap. The incorporation of MoS2 was found to increase the specific capacitance of Cs from 421 mFg-1 to 1589 mFg-1 at a current density of 100 μAg-1. The EIS analysis revealed an increase in the pseudo-capacitance from 0.09 μF to 4.13 μF and a reduction of charge transfer resistance that comes from the nanofiller contribution. MoS2 nanoflower introduces more active sites and expands the electroactive zone, thus improving the charge storage property of Cs. The Cs-MoS2 may offer a new route for the synthesis of eco-friendly, biodegradable, and electrical storage devices.

Amorphous Nickel Hydroxide Shell on Ni8P3 Nanorods for Boosted Highly Stable Overall Water Splitting at High Current

Developing highly active, highly stable, and cheap electrocatalysts for water splitting is of great significance for hydrogen production. Herein, we report an amorphous Ni(OH)2-clothed transition Ni8P3 catalyst, in which the amorphous Ni(OH)2 shell provides catalytic active sites and serves as a proton conductive encapsulation layer to ensure efficient proton supply to the active Ni8P3 sites. As expected, the Ni8P3@Ni(OH)2 catalyst exhibits significant water decomposition performance at low and high current densities of 10, 100, and 1000 mA cm-2 at 1.45, 1.71, and 2.21 V, respectively, which is comparable to those of commercial electrocatalysts. In particular, the prepared Ni8P3@Ni(OH)2 electrodes possess exceptional long-term durability (200 h) at high current (over 1 A). The significantly improved water-splitting activity and durability in alkaline medium are expected to make them attractive catalyst materials to produce renewable chemical fuels.

Coupling effect and electronic modulation for synergistically enhanced overall alkaline water splitting on bifunctional Fe-doped CoBi/CoP nanoneedle arrays

Designing bifunctional electrocatalysts with high efficiency and low cost for water splitting is urgently required for the production of green hydrogen. Herein, a bifunctional iron-doped cobalt borate/cobalt phosphide hybrid supported on nickel foam (Fe-CoBi/CoP/NF) was fabricated via hydrothermal and phosphating process. Benefit from the unique nanoneedle architecture for faster mass transfer, the existence of borate on CoBi for accelerating proton transfer, the moderate adsorption of H* species on CoP, Fe doping and the synergistic effect between CoBi and CoP, Fe-CoBi/CoP/NF hybrid exhibits a low overpotential of 137 mV and 260 mV at 100 mA cm-2 for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Moreover, Fe-CoBi/CoP/NF||Fe-CoBi/CoP/NF also presents a low cell potential of 1.65 V@100 mA cm-2 for overall alkaline water splitting and excellent durability (128 h) without decay. This work provides a new insight into the design of bifunctional electrocatalysts simultaneously through the morphological engineering and heteroatomic doping.

Iron doping and interface engineering on amorphous/crystalline Fe-NixSy heterostructures toward high-stability and kinetically accelerated water splitting

It is very important to develop transition metal-based electrocatalysts with excellent activity, high stability and low-cost for overall water splitting. In this work, the Fe-doped NixSy/NF amorphous/crystalline heterostructure nanoarrays (Fe-NixSy/NF) was synthesized by a simple one-step method. The resulting hierarchically structured nanoarrays offer the advantages of large surface area, high structural void fraction and accessible internal surfaces. These advantages not only furnish additional catalytically active sites, but also enhance the stability of the structure and effectively accelerate mass diffusion and charge transport. Experimental and characterization results indicate that Fe doping increases the electrical conductivity of amorphous/crystalline NixSy/NF, and the NiS-Ni3S2 heterojunctions evoke interfacial charge rearrangement and optimize the adsorption free energy of the intermediates, which allows the catalyst to exhibit low overpotential and superior electrocatalytic activity. Especially, the overpotentials of hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) of Fe-NixSy/NF at 10 mA cm-2 in an alkaline environment are 102.4 and 230.5 mV, respectively. When applied as a bifunctional catalyst for overall water splitting, it requires only 1.45 V cell voltage to deliver a current density of 10 mA cm-2, which is preferable to the all-noble metal Pt/C || IrO2 electrocatalyst (1.62 mV @ 10 mA cm-2). In addition, Fe-NixSy/NF has excellent stability, and there is no obvious degradation after 96 h continuous operation at a current density of 100 mA cm-2. This work affords insights into the application of doping strategies and crystalline/amorphous synergistic modulation of the electrocatalytic activity of transition metal-based catalysts in energy conversion systems.

Controlled Surface Modification of Cobalt Phosphide with Sulfur Tunes Hydrogenation Catalysis

Transition metal phosphides have shown promise as catalysts for water splitting and hydrotreating, especially when a small amount of sulfur is incorporated into the phosphides. However, the effect of sulfur on catalysis is not well understood. In part, this is because conventional preparation methods of sulfur-doped transition metal phosphides lead to sulfur both inside and at the surface of the material. Here, we present an alternative method of modifying cobalt phosphide (CoP) with sulfur using molecular S-transfer reagents, namely, phosphine sulfides (SPR3). SPR3 added sulfur to the surface of CoP and using a series of SPR3 reagents having different P═S bond strengths enabled control over the amount and type of sulfur transferred. Our results show that there is a distribution of different sulfur sites possible on the CoP surface with S-binding strengths in the range of 69 to 84 kcal/mol. This provides fundamental information on how sulfur binds to an amorphous CoP surface and provides a basis to assess how number and type of sulfur on CoP influences catalysis. For the catalytic hydrogenation of cinnamaldehyde, intermediate amounts of sulfur with intermediate binding strengths at the surface of CoP were optimal. With some but not too much sulfur, CoP exhibited a higher hydrogenation productivity and a decreased formation of secondary reaction products. Our work provides important insight into the S-effect on the catalysis by transition metal phosphides and opens new avenues for catalyst design.

Application of Oxygen-Group-Based Amorphous Nanomaterials in Electrocatalytic Water Splitting

Environmentally friendly energy sources (e.g., hydrogen) require an urgent development targeting to address the problem of energy scarcity. Electrocatalytic water splitting is being explored as a convenient catalytic reaction in this context, and promising amorphous nanomaterials (ANMs) are receiving increasing attention due to their excellent catalytic properties.Oxygen group-based amorphous nanomaterials (O-ANMs) are an important component of the broad family of ANMs due to their unique amorphous structure, large number of defects, and abundant randomly oriented bonds, O-ANMs induce the generation of a larger number of active sites, which favors a better catalytic activity. Meanwhile, amorphous materials can disrupt the inherent features of conventional crystalline materials regarding electron transfer paths, resulting in higher flexibility. O-ANMs mainly include VIA elements such as oxygen, sulfur, selenium, tellurium, and other transition metals, most of which are reported to be free of noble metals and have comparable performance to commercial catalysts Pt/C or IrO2 and RuO2 in electrocatalysis. This review covers the features and reaction mechanism of O-ANMs, the synthesis strategies to prepare O-ANMs, as well as the application of O-ANMs in electrocatalytic water splitting. Last, the challenges and prospective remarks for future development in O-ANMs for electrocatalytic water splitting are concluded.

Fabrication of inverse opal molybdenum sulfide and its use as a catalyst for H2 evolution

Amorphous molybdenum sulfide (MoSx) and crystalline molybdenum disulfide (MoS2) are attractive noble-metal-free electrocatalysts for the H2 evolution reaction from water. Their actual activities depend on the quantity of active sites which are exposed to the electrolyte, which in turn, is influenced by their specific electrochemical surface area. Herein we report on the fabrication of regular inverse opal MoSx and MoS2 films by employing polystyrene nanoparticles with diameters in the range of 30-90 nm as hard templates. The use of these catalysts for the H2 evolution reaction in an acidic electrolyte solution is also presented. Impacts of the regular porous structure, the film thickness as well as the chemical nature of the catalyst (MoS2versus MoSx) are discussed. It shows a catalytically-effective-thickness of ca. 300 nm where the electrolyte can fully penetrate the catalyst macropores, thus all the catalytic active sites can be exposed to the electrolyte to achieve the maximal catalytic operation.

Metal-Doped C3B Monolayer as the Promising Electrocatalyst for Hydrogen/Oxygen Evolution Reaction: A Combined Density Functional Theory and Machine Learning Study

The development of high-efficiency electrocatalysts for hydrogen evolution reduction (HER)/oxygen evolution reduction (OER) is highly desirable. In particular, metal borides have attracted much attention because of their excellent performances. In this study, we designed a series of metal borides by doping of a transition metal (TM) in a C3B monolayer and further explored their potential applications for HER/OER via density functional theory (DFT) calculations and machine learning (ML) analysis. Our results revealed that the |ΔG*H| values of Fe-, Ag-, Re-, and Ir-doped C3B are approximately 0.00 eV, indicating their excellent HER performances. On the other hand, among all the considered TM atoms, the Ni- and Pt-doped C3B exhibit excellent OER activities with the overpotentials smaller than 0.44 V. Together with their low overpotentials for HER (<0.16 V), we proposed that Ni/C3B and Pt/C3B could be the potential bifunctional electrocatalysts for water splitting. In addition, the ML method was employed to identify the important factors to affect the performance of the TM/C3B electrocatalyst. Interestingly, the results showed that the OER performance is closely related to the inherent properties of TM atoms, i.e., the number of d electrons, electronegativity, atomic radius, and first ionization energy; all these values could be directly obtained without DFT calculations. Our results not only proposed several promising electrocatalysts for HER/OER but also suggested a guidance to design the potential TM-boron (TM-B)-based electrocatalysts.

Spectroscopic Evaluation of Surface Chemical Processes Occurring in MoS2 upon Aging

Molybdenum disulfide (MoS₂) coatings have attracted widespread industrial interest owing to their excellent lubricating properties under vacuum and inert conditions. Unfortunately, the increase in MoS₂ interfacial shear strength following prolonged exposure to ambient conditions (a process referred to as "aging") has resulted in reliability issues when MoS₂ is employed as solid lubricant. While aging of MoS₂ is generally attributed to physical and chemical changes caused by adsorbed water and/or oxygen, a mechanistic understanding of the relative role of these two gaseous species in the evolution of the surface chemistry of MoS₂ is still elusive. Additionally, remarkably little is known about the effect of thermally- and tribologically-induced microstructural variations in MoS₂ on the aging processes occurring in the near-surface region of the coating. Here, we employed three analytical techniques, namely, X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (ToF-SIMS), and grazing-incidence X-ray diffraction (GIXRD), to gain insights into the aging phenomena occurring in sputtered MoS₂ coatings before and after tribological testing, while also evaluating the impact of thermally-induced variations in the coating structure on aging. The outcomes of XPS analyses provide evidence that a substantial surface oxidation of MoS₂ only takes place under humid conditions. Furthermore, the correlation of XPS, ToF-SIMS, and GIXRD results allowed for the development of a qualitative model for the impact of shear-induced microstructural variations in MoS₂ on the transport of water in the near-surface region of this material and on the extent of surface oxidation. These results add significantly to our understanding of the aging mechanisms of MoS₂ coatings used in tribological applications and their dependence on environmental conditions.

Three-dimensional ordered macroporous molybdenum doped NiCoP honeycomb electrode for two-step water electrolysis

Two-step alkaline water electrolysis is considered a safe and efficient method for producing hydrogen from renewable energy. Reversal of the current polarity in a bifunctional electrocatalyst used as a gas evolution electrode (GEE) in two-step water electrolysis can generate H₂/O₂ at different times and in different spaces. The design of a bifunctional electrocatalyst with high durability and excellent activity is imperative to achieving continuous, safe, and pure H₂ generation via two-step alkaline water electrolysis. Here, we present for the first time a novel 3D Mo-doped NiCo phosphide honeycomb electrocatalyst that was grown on nickel foam (3D Mo-NiCoP/NF) and fabricated using polystyrene as a template. The electrocatalyst exhibited extremely low overpotentials in both the hydrogen evolution reaction (HER; 117 mV at 10 mA/cm²) and the oxygen evolution reaction (OER; 344 mV at 100 mA/cm²). As a bifunctional electrocatalyst for two-step alkaline water electrolysis, the device had a 1.784 V cell voltage at 10 mA/cm², 95% decoupling efficiency, and ∼83% energy conversion efficiency. Taken together, the use of 3D Mo-NiCoP/NF as a GEE reduced the complexity and lowered the cost of the electrolyzer. The latter could be used to construct highly competitive water-splitting systems for continuous H₂ production and green energy harvesting.

Approach to Evaluation of Electrocatalytic Water Splitting Parameters, Reflecting Intrinsic Activity: Toward the Right Pathway

The development of transition metal-based non-precious-metal electrocatalysts for energy storage and conversion systems has received a lot of interest recently. To further this subject in the proper way given the development of electrocatalysts, a fair comparison of their respective performance is necessary. This Review investigates the parameters used for the comparison of electrocatalyst activity. Significant evaluation criteria employed in electrochemical water splitting studies are the overpotential at defined current density usually at 10 mA per geometric surface area, Tafel slope, exchange current density, mass activity, specific activity and turnover frequency (TOF). This Review will discuss how to identify the specific activity and TOF by electrochemical and non-electrochemical methods to represent intrinsic activity as well as the benefits and uncertainties of each technique, ensuring that each method is applied correctly when calculating intrinsic activity metrics.

Efficient Self-Powered Overall Water Splitting by Ni4 Mo/MoO2 Heterogeneous Nanorods Trifunctional Electrocatalysts

The exploration of cost-effective multifunctional electrodes with high activity toward energy storage and conversion systems, such as self-powered alkaline water electrolysis, is very meaningful, although studies remain quite limited. Herein, a heterogeneous nickel-molybdenum (NiMo)-based electrode is fabricated for the first time as a trifunctional electrode for asymmetric supercapacitor (ASC), hydrogen evolution reaction, and oxygen evolution reaction. The trifunctional electrode consists of Ni₄ Mo and MoO₂ (denoted Ni₄ Mo/MoO₂ ) with hierarchical nanorod heterostructure and abundant heterogeneous nanointerfaces creating sufficient active sites and efficient charge transfer for achieving high performance self-power electrochemical devices. The ASC consists of the as-prepared Ni₄ Mo/MoO₂ positive electrode, showing a broad potential window of 1.6 V, and a maximum energy density of 115.6 Wh kg^-1 , while the alkaline overall water splitting (OWS) assembled using the as-prepared Ni₄ Mo/MoO₂ as bifunctional catalysts only requires a low cell voltage of 1.48 V to achieve a current density of 10 mA cm^-2 in aqueous alkaline electrolyte. Finally, by integrating the Ni₄ Mo/MoO₂ -based ASC and OWS devices, an aqueous self-powered OWS is assembled, which self-power the OWS to generate hydrogen gas and oxygen gas, verifying great potential of the as-prepared Ni₄ Mo/MoO₂ for sustainable and renewable energy storage and conversion system.

Combining Highly Dispersed Amorphous MoS3 with Pt Nanodendrites as Robust Electrocatalysts for Hydrogen Evolution Reaction

Surface modification of electrocatalysts to obtain new or improved electrocatalytic performance is currently the main strategy for designing advanced nanocatalysts. In this work, highly dispersed amorphous molybdenum trisulfide-anchored Platinum nanodendrites (denoted as Pt-a-MoS₃  NDs) are developed as efficient hydrogen evolution electrocatalysts. The formation mechanism of spontaneous in situ polymerization MoS₄ ^2- into a-MoS₃ on Pt surface is discussed in detail. It is verified that the highly dispersed a-MoS₃ enhances the electrocatalytic activity of Pt catalysts under both acidic and alkaline conditions. The potentials at the current density of 10 mA cm^-2 (η₁₀ ) in 0.5 m sulfuric acid (H₂ SO₄ ) and 1 m potassium hydroxide (KOH) electrolyte are -11.5 and -16.3 mV, respectively, which is significantly lower than that of commercial Pt/C (-20.2 mV and -30.7 mV). This study demonstrates that such high activity benefits from the interface between highly dispersed a-MoS₃ and Pt sites, which act as the preferred adsorption sites for the efficient conversion of hydrion (H⁺ ) to hydrogen (H₂ ). Additionally, the anchoring of highly dispersed clusters to Pt substrate greatly enhances the corresponding electrocatalytic stability.

Phase Instability in van der Waals In2 Se3 Determined by Surface Coordination

van der Waals In₂ Se₃ has attracted significant attention for its room-temperature 2D ferroelectricity/antiferroelectricity down to monolayer thickness. However, instability and potential degradation pathway in 2D In₂ Se₃ have not yet been adequately addressed. Using a combination of experimental and theoretical approaches, we here unravel the phase instability in both α- and β'-In₂ Se₃ originating from the relatively unstable octahedral coordination. Together with the broken bonds at the edge steps, it leads to moisture-facilitated oxidation of In₂ Se₃ in air to form amorphous In₂ Se_3-3x O_3x layers and Se hemisphere particles. Both O₂ and H₂ O are required for such surface oxidation, which can be further promoted by light illumination. In addition, the self-passivation effect from the In₂ Se_3-3x O_3x layer can effectively limit such oxidation to only a few nanometer thickness. The achieved insight paves way for better understanding and optimizing 2D In₂ Se₃ performance for device applications.

Amorphous Mo-doped NiS0.5 Se0.5 Nanosheets@Crystalline NiS0.5 Se0.5 Nanorods for High Current-density Electrocatalytic Water Splitting in Neutral Media

It is vitally important to develop highly active, robust and low-cost transition metal-based electrocatalysts for overall water splitting in neutral solution especially at large current density. In this work, amorphous Mo-doped NiS_0.5 Se_0.5 nanosheets@crystalline NiS_0.5 Se_0.5 nanorods (Am-Mo-NiS_0.5 Se_0.5 ) was synthesized using a facil one-step strategy. In phosphate buffer saline solution, the Am-Mo-NiS_0.5 Se_0.5 shows tiny overpotentials of 48 and 209 mV for hydrogen evolution reaction (HER), 238 and 514 mV for oxygen evolution reaction (OER) at 10 and 1000 mA cm^-2 , respectively. Moreover, Am-Mo-NiS_0.5 Se_0.5 delivers excellent stability for at least 300 h without obvious degradation. Theoretical calculations revealed that the Ni sites in the defect-rich amorphous structure of Am-Mo-NiS_0.5 Se_0.5 owns higher electron state density and strengthened the binding energy of H₂ O, which will optimize H adsorption/desorption energy barriers and reduce the adsorption energy of OER determining step.

Microscopic Diffusion of Atomic Hydrogen and Water in HER Catalyst MoS2 Revealed by Neutron Scattering

The design of novel and abundant catalytic materials for electrolysis is crucial for reaching carbon neutrality of the global energy system. A deliberate approach to catalyst design requires both theoretical and experimental knowledge not only of the target reactions but also of the supplementary mechanisms affecting the catalytic activity. In this study, we focus on the interplay of hydrogen mobility and reactivity in the hydrogen evolution reaction catalyst MoS₂. We have studied the diffusion of atomic hydrogen and water by means of neutron and X-ray photoelectron spectroscopies combined with classical molecular dynamics simulations. The observed interaction of water with single-crystal MoS₂ shows the possibility of intercalation within volume defects, where it can access edge sites of the material. Our surface studies also demonstrate that atomic hydrogen can be inserted into MoS₂, where it then occupies various adsorption sites, possibly favoring defect vicinities. The motion of H atoms parallel to the layers of MoS₂ is fast with D ≈ 1 × 10^-9 m²/s at room temperature and exhibits Brownian diffusion behavior with little dependence on temperature, i.e., with a very low diffusion activation barrier.

Microstructure-regulated inverted pyramidal Si photocathodes for efficient hydrogen generation

Black silicon electrodes with inverted pyramid arrays (SiIPs) are promising for efficient photoelectrochemical water splitting due to their excellent photoelectric properties and quasi-hydrophilicity. In this work, an elaborate study on microstructure regulation of SiIP photocathodes is reported. We find that on SiIPs where sidewalls have been processed with copper-assisted chemical etching (Cu-ACE), there are vast numbers of micro-pits distributed (deep holes and shallow grooves) that exactly determine electrode performance, which is a result of homogeneous Cu²⁺ oxidation of Si. Furthermore, SiIP microstructural features can be effectively adjusted via controlling the etchant composition and introducing alkali post-treatment. Taking the trade-off between light trapping ability and charge separation capacity into consideration, we optimized the hydrogen evolution reaction (HER) activity of a SiIP photocathode, and its onset potential was decreased to -0.35 V vs. RHE. On this basis, we constructed reliable heterojunctions to further improve the sluggish HER kinetics. The optimized SiIPs/TiO₂/MoS_x cathode exhibits a considerable photocurrent density of 9.45 mA cm^-2 at zero HER overpotential for 18 h in acidic media. Notably, our work presents a detailed physical insight into micro-pit formation and elimination in Cu-ACE, and describes the dependency of SiIP-based electrode performance on the microstructure morphology, paving a new way for its potential application in unbiased overall water splitting.

Impact Electrochemistry of MoS2: Electrocatalysis and Hydrogen Generation at Low Overpotentials

MoS₂ materials have been extensively studied as hydrogen evolution reaction (HER) catalysts. In this study nanoparticulate MoS₂ is explored as a HER catalyst through impact voltammetry. The onset potential was found to be -0.10 V (vs RHE) at pH 2, which was confirmed to be due to HER by scale-up of the impact experiment to generate and collect a sufficient volume of the gas to enable its identification as hydrogen via gas chromatography. This is in contrast to electrodeposited MoS₂, which was found to be stable in pH 2 sulfuric acid solution with an onset potential of -0.29 V (vs RHE), in good agreement with literature. XPS was used to categorize the materials and confirm the chemical composition of both nanoparticles and electrodeposits, with XRD used to analyze the crystal structure of the nanoparticles. The early onset of HER was postulated from kinetic analysis to be due to the presence of nanoplatelets of about 1-3 trilayers participating in the impact reactions, and AFM imaging confirmed the presence of these platelets.

Decomposition of Halogenated Molybdenum Sulfide Dianions [Mo3S7X6]2- (X = Cl, Br, I)

Molybdenum sulfides are considered a promising and inexpensive alternative to platinum as a catalyst for the hydrogen evolution reaction. In this study, we perform collision-induced dissociation experiments in the gas phase with the halogenated molybdenum sulfides [Mo₃S₇Cl₆]^2-, [Mo₃S₇Br₆]^2-, and [Mo₃S₇I₆]^2-. We show that the first fragmentation step for all three dianions is charge separation via loss of a halide ion. As a second step, further halogen loss competes with the dissociation of a disulfur molecule, whereas the former becomes energetically more favorable and the latter becomes less favorable from chlorine via bromine to iodine. We show that the leaving S₂ group is composed of sulfur atoms from two bridging groups. These decomposition pathways differ drastically from the pure [Mo₃S₁₃]^2- clusters. The obtained insight into preferred dissociation pathways of molybdenum sulfides illustrate possible reaction pathways during the activation of these substances in a catalytic environment.

Facile Synthesis of Conductive Metal-Organic Frameworks Nanotubes for Ultrahigh-Performance Flexible NO Sensors

Cu-benzenehexathiol (Cu-BHT) has attracted significant attention due to its record high electrical conductivity and crystal defects Cu_2c . However, the nonporous structure and small specific surface area of Cu-BHT with two-dimensional kagome lattice invariably limit its practical application in sensing and catalysis. In this work, Cu-BHT nanotubes (Cu-BHT-NTs) are designed and prepared via a facile homogeneous reaction to solve these problems. Compared with the traditional nanorod-like structure, the Cu-BHT-NTs not only have a higher specific surface area but also possess a higher proportion of crystal defects (66.6%). The successfully configured DPPTT/Cu-BHT-NTs heterostructure organic field-effect transistor (OFET)-based sensor exhibits excellent sensitivity as high as 13 610%, a minimum detection limits down to 5 ppb, and exceptional selectivity to nitric oxide (NO) toxic gases. Theoretical analysis systematically shows that Cu_2c sites in the Cu-BHT-NTs increase the number of electrons transferred from the heterostructure to NO molecules, confirming that the high sensitivity and selectivity result from the high binding between Cu-BHT-NTs and NO molecules. Furthermore, a fully flexible device based on the heterojunction OFET sensor is prepared to ensure the convenience of wearing and carrying gas sensors, opening up a new avenue for the next generation of wearable intelligent electronics.

Synergistic Incorporating RuO2 and NiFeOOH Layers onto Ni3 S2 Nanoflakes with Modulated Electron Structure for Efficient Water Splitting

Synergistic electronic modulations is an effective strategy to develop efficient and stable electrocatalysts for the electrochemical hydrogen production via water splitting. Herein, tremella-like Ni₃ S₂ @RuO₂ and Ni₃ S₂ @NiFeOOH heterostructures catalysts are constructed on Ni foams (NF) by coupling RuO₂ and NiFeOOH on Ni₃ S₂ nanoflake arrays. The resulting Ni₃ S₂ @RuO₂ /NF electrode exhibits top-level hydrogen evolution reaction electrocatalysis with an extremely low overpotential of 12 mV at 10 mA cm^-2 and a Tafel slope of 30.7 mV dec^-1 , as well as the as-obtained Ni₃ S₂ @NiFeOOH/NF electrode with tunable binding energy for OH* intermediates shows remarkable oxygen evolution reaction electrocatalysis with an overpotential of 227 mV at 10 mA cm^-2 . The electrolyzer employing Ni₃ S₂ @RuO₂ /NF electrode for cathodic H₂ production and Ni₃ S₂ @NiFeOOH/NF for anodic O₂ production merely needs a low voltage of 1.47 V to drive 10 mA cm^-2 with excellent durability. The combined theoretical calculation and X-ray photoelectron spectroscopy investigation reveal that heterogeneous configuration can induce electron transfer from Ni₃ S₂ to RuO₂ through NiRu/SRu bonds, and thus tailor the d-band center and optimize the activated H₂ O/H* Gibbs free energies for enhanced hydrogen evolution reaction on Ni₃ S₂ @RuO₂ . This study may shed new light on the construction of heterostructures as highest-performing electrocatalysts and offer unique insight into the theory mechanism.

Tungsten-Based Nanocatalysts: Research Progress and Future Prospects

The high price of noble metal resources limits its commercial application and stimulates the potential for developing new catalysts that can replace noble metal catalysts. Tungsten-based catalysts have become the most important substitutes for noble metal catalysts because of their rich resources, friendly environment, rich valence and better adsorption enthalpy. However, some challenges still hinder the development of tungsten-based catalysts, such as limited catalytic activity, instability, difficult recovery, and so on. At present, the focus of tungsten-based catalyst research is to develop a satisfactory material with high catalytic performance, excellent stability and green environmental protection, mainly including tungsten atomic catalysts, tungsten metal nanocatalysts, tungsten-based compound nanocatalysts, and so on. In this work, we first present the research status of these tungsten-based catalysts with different sizes, existing forms, and chemical compositions, and further provide a basis for future perspectives on tungsten-based catalysts.

Observation of polarity-switchable photoconductivity in III-nitride/MoSx core-shell nanowires

III-V semiconductor nanowires are indispensable building blocks for nanoscale electronic and optoelectronic devices. However, solely relying on their intrinsic physical and material properties sometimes limits device functionalities to meet the increasing demands in versatile and complex electronic world. By leveraging the distinctive nature of the one-dimensional geometry and large surface-to-volume ratio of the nanowires, new properties can be attained through monolithic integration of conventional nanowires with other easy-synthesized functional materials. Herein, we combine high-crystal-quality III-nitride nanowires with amorphous molybdenum sulfides (a-MoS_x) to construct III-nitride/a-MoS_x core-shell nanostructures. Upon light illumination, such nanostructures exhibit striking spectrally distinctive photodetection characteristic in photoelectrochemical environment, demonstrating a negative photoresponsivity of -100.42 mA W^-1 under 254 nm illumination, and a positive photoresponsivity of 29.5 mA W^-1 under 365 nm illumination. Density functional theory calculations reveal that the successful surface modification of the nanowires via a-MoS_x decoration accelerates the reaction process at the electrolyte/nanowire interface, leading to the generation of opposite photocurrent signals under different photon illumination. Most importantly, such polarity-switchable photoconductivity can be further tuned for multiple wavelength bands photodetection by simply adjusting the surrounding environment and/or tailoring the nanowire composition, showing great promise to build light-wavelength controllable sensing devices in the future.

Polymer Photoelectrodes for Solar Fuel Production: Progress and Challenges

Converting solar energy to fuels has attracted substantial interest over the past decades because it has the potential to sustainably meet the increasing global energy demand. However, achieving this potential requires significant technological advances. Polymer photoelectrodes are composed of earth-abundant elements, e.g. carbon, nitrogen, oxygen, hydrogen, which promise to be more economically sustainable than their inorganic counterparts. Furthermore, the electronic structure of polymer photoelectrodes can be more easily tuned to fit the solar spectrum than inorganic counterparts, promising a feasible practical application. As a fast-moving area, in particular, over the past ten years, we have witnessed an explosion of reports on polymer materials, including photoelectrodes, cocatalysts, device architectures, and fundamental understanding experimentally and theoretically, all of which have been detailed in this review. Furthermore, the prospects of this field are discussed to highlight the future development of polymer photoelectrodes.

Rearrangement and decomposition pathways of bare and hydrogenated molybdenum oxysulfides in the gas phase

Molybdenum sulfides and molybdenum oxysulfides are considered a promising and cheap alternative to platinum as a catalyst for the hydrogen evolution reaction (HER). To better understand possible rearrangements during catalyst activation, we perform collision induced dissociation experiments in the gas phase with eight different molybdenum oxysulfides, namely [Mo₂O₂S₆]^2-, [Mo₂O₂S₆]^-, [Mo₂O₂S₅]^2-, [Mo₂O₂S₅]^-, [Mo₂O₂S₄]^-, [HMo₂O₂S₆]^-, [HMo₂O₂S₅]^- and [HMo₂O₂S₄]^-, on a Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometer. We identify fragmentation channels of the molybdenum oxysulfides and their interconnections. Together with quantum chemical calculations, the results show that [Mo₂O₂S₄]^- is a particularly stable species against further dissociation, which is reached from all starting species with relatively low collision energies. Most interestingly, H atom loss is the only fragmentation channel observed for [HMo₂O₂S₄]^- at low collision energies, which relates to potential HER activity, since two such H atom binding sites on a surface may act together to release H₂. The calculations reveal that multiple isomers are often very close in energy, especially for the hydrogenated species, i.e., atomic hydrogen can bind at various sites of the clusters. S₂ groups play a decisive role in hydrogen adsorption. These are further features with potential relevance for HER catalysis.

Molybdenum Disulphide Precipitation in Jet Reactors: Introduction of Kinetics Model for Computational Fluid Dynamics Calculations

In our previous work, we used the population balance method to develop a molybdenum disulphide kinetics model consisting of a set of differential equations and constants formulated to express the kinetics of complex chemical reactions leading to molybdenum disulphide precipitation. The purpose of the study is to improved the model to describe the occurring phenomena more thoroughly and have introduced computational fluid dynamics (CFD) modelling to conduct calculations for various reactor geometries. CFD simulations supplemented with our nucleation and growth kinetics model can predict the impact of mixing conditions on particle size with good accuracy. This introduces another engineering tool for designing efficient chemical reactors.

Pulsed Laser Phosphorus Doping and Nanocomposite Catalysts Deposition in Forming a-MoSx/NP-Mo//n+p-Si Photocathodes for Efficient Solar Hydrogen Production

Pulsed laser deposition of nanostructured molybdenum sulfide films creates specific nonequilibrium growth conditions, which improve the electrocatalytic properties of the films in a hydrogen evolution reaction (HER). The enhanced catalytic performance of the amorphous a-MoS_x (2 ≤ x ≤ 3) matrix is due to the synergistic effect of the Mo nanoparticles (Mo-NP) formed during the laser ablation of a MoS₂ target. This work looks at the possibility of employing a-MoS_x/NP-Mo films (4 and 20 nm thickness) to produce hydrogen by photo-stimulated HER using a p-Si cathode. A simple technique of pulsed laser p-Si doping with phosphorus was used to form an n⁺p-junction. Investigations of the energy band arrangement at the interface between a-MoS_x/NP-Mo and n⁺-Si showed that the photo-HER on an a-MoS_x/NP-Mo//n⁺p-Si photocathode with a 20 nm thick catalytic film proceeded according to a Z-scheme. The thickness of interfacial SiO_y(P) nanolayer varied little in photo-HER without interfering with the effective electric current across the interface. The a-MoS_x/NP-Mo//n⁺p-Si photocathode showed good long-term durability; its onset potential was 390 mV and photocurrent density was at 0 V was 28.7 mA/cm². The a-MoS_x/NP-Mo//n⁺p-Si photocathodes and their laser-based production technique offer a promising pathway toward sustainable solar hydrogen production.

Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments

Replacing fossil fuels with energy sources and carriers that are sustainable, environmentally benign, and affordable is amongst the most pressing challenges for future socio-economic development. To that goal, hydrogen is presumed to be the most promising energy carrier. Electrocatalytic water splitting, if driven by green electricity, would provide hydrogen with minimal CO2 footprint. The viability of water electrolysis still hinges on the availability of durable earth-abundant electrocatalyst materials and the overall process efficiency. This review spans from the fundamentals of electrocatalytically initiated water splitting to the very latest scientific findings from university and institutional research, also covering specifications and special features of the current industrial processes and those processes currently being tested in large-scale applications. Recently developed strategies are described for the optimisation and discovery of active and durable materials for electrodes that ever-increasingly harness first-principles calculations and machine learning. In addition, a technoeconomic analysis of water electrolysis is included that allows an assessment of the extent to which a large-scale implementation of water splitting can help to combat climate change. This review article is intended to cross-pollinate and strengthen efforts from fundamental understanding to technical implementation and to improve the 'junctions' between the field's physical chemists, materials scientists and engineers, as well as stimulate much-needed exchange among these groups on challenges encountered in the different domains.