Biophysical interaction between corticosteroids and natural surfactant preparation: implications for pulmonary drug delivery using surfactant a a carrier

Thermodynamic and Structural Study of Budesonide-Exogenous Lung Surfactant System

The clinical benefits of using exogenous pulmonary surfactant (EPS) as a carrier of budesonide (BUD), a non-halogenated corticosteroid with a broad anti-inflammatory effect, have been established. Using various experimental techniques (differential scanning calorimetry DSC, small- and wide- angle X-ray scattering SAXS/WAXS, small- angle neutron scattering SANS, fluorescence spectroscopy, dynamic light scattering DLS, and zeta potential), we investigated the effect of BUD on the thermodynamics and structure of the clinically used EPS, Curosurf®. We show that BUD facilitates the Curosurf® phase transition from the gel to the fluid state, resulting in a decrease in the temperature of the main phase transition (Tm) and enthalpy (ΔH). The morphology of the Curosurf® dispersion is maintained for BUD < 10 wt% of the Curosurf® mass; BUD slightly increases the repeat distance d of the fluid lamellar phase in multilamellar vesicles (MLVs) resulting from the thickening of the lipid bilayer. The bilayer thickening (~0.23 nm) was derived from SANS data. The presence of ~2 mmol/L of Ca2+ maintains the effect and structure of the MLVs. The changes in the lateral pressure of the Curosurf® bilayer revealed that the intercalated BUD between the acyl chains of the surfactant's lipid molecules resides deeper in the hydrophobic region when its content exceeds ~6 wt%. Our studies support the concept of a combined therapy utilising budesonide-enriched Curosurf®.

Surfactant as a drug carrier

Drug delivery using a surfactant vehicle has the potential to prevent systemic side effects by delivering therapeutic agents directly to the respiratory system. The inherent chemical properties of surfactant allows it to readily distribute throughout the respiratory system. Therapeutic agents delivered by surfactant can primarily confer additional benefits but have potential to improve surfactant function. It is critically important that additional agents do not interefere with the innate surface tension lowering function of surfactant. Systemic evaluation through benchtop, translational and human trials are required to translate this potential technique into clinical practice.

Pathogenetic role of alveolar surfactant depleted by phosgene: Biophysical mechanisms and peak inhalation exposure metrics

In contrast to water-soluble respiratory tract irritants in their gas phase, the physicochemical properties of 'hydrophilicity' vs. 'lipophilicity' are the preponderant factors that dictate the site of major retention of the gas at the portal of entry. The lipophilic physical properties of phosgene gas facilitate retention in the alveolar region lined with amphipathic pulmonary surfactant (PS). The relationship between exposure and adverse health outcomes is complex, may vary over time, and is dependent on the biokinetics, biophysics, and pool size of PS relative to the inhaled dose of phosgene. Kinetic PS depletion is hypothesized to occur as inhalation followed by inhaled dose-dependent PS depletion. A kinetic model was developed to better understand the variables characterizing the inhaled dose rates of phosgene vs. PS pool size reconstitution. Modeling and empirical data from published evidence revealed that phosgene gas unequivocally follows a concentration x exposure (C × t) metric, independent of the frequency of exposure. The modeled and empirical data support the hypothesis that the exposure standards of phosgene are described best by a C × t time-averaged metric. Modeled data favorably duplicate expert panel-derived standards. Peak exposures within a reasonable range are of no concern.

Dexamethasone and Dexamethasone Phosphate: Effect on DMPC Membrane Models

Dexamethasone (Dex) and Dexamethasone phosphate (Dex-P) are synthetic glucocorticoids with high anti-inflammatory and immunosuppressive actions that gained visibility because they reduce the mortality in critical patients with COVID-19 connected to assisted breathing. They have been widely used for the treatment of several diseases and in patients under chronic treatments, thus, it is important to understand their interaction with membranes, the first barrier when these drugs get into the body. Here, the effect of Dex and Dex-P on dimyiristoylphophatidylcholine (DMPC) membranes were studied using Langmuir films and vesicles. Our results indicate that the presence of Dex in DMPC monolayers makes them more compressible and less reflective, induces the appearance of aggregates, and suppresses the Liquid Expanded/Liquid Condensed (LE/LC) phase transition. The phosphorylated drug, Dex-P, also induces the formation of aggregates in DMPC/Dex-P films, but without disturbing the LE/LC phase transition and reflectivity. Insertion experiments demonstrate that Dex induces larger changes in surface pressure than Dex-P, due to its higher hydrophobic character. Both drugs can penetrate membranes at high lipid packings. Vesicle shape fluctuation analysis shows that Dex-P adsorption on GUVs of DMPC decreases membrane deformability. In conclusion, both drugs can penetrate and alter the mechanical properties of DMPC membranes.

Beyond the Interface: Improved Pulmonary Surfactant-Assisted Drug Delivery through Surface-Associated Structures

Pulmonary surfactant (PS) has been proposed as an efficient drug delivery vehicle for inhaled therapies. Its ability to adsorb and spread interfacially and transport different drugs associated with it has been studied mainly by different surface balance designs, typically interconnecting various compartments by interfacial paper bridges, mimicking in vitro the respiratory air-liquid interface. It has been demonstrated that only a monomolecular surface layer of PS/drug is able to cross this bridge. However, surfactant films are typically organized as multi-layered structures associated with the interface. The aim of this work was to explore the contribution of surface-associated structures to the spreading of PS and the transport of drugs. We have designed a novel vehiculization balance in which donor and recipient compartments are connected by a whole three-dimensional layer of liquid and not only by an interfacial bridge. By combining different surfactant formulations and liposomes with a fluorescent lipid dye and a model hydrophobic drug, budesonide (BUD), we observed that the use of the bridge significantly reduced the transfer of lipids and drug through the air-liquid interface in comparison to what can be spread through a fully open interfacial liquid layer. We conclude that three-dimensional structures connected to the surfactant interfacial film can provide an important additional contribution to interfacial delivery, as they are able to transport significant amounts of lipids and drugs during surfactant spreading.

The concentration-dependent effect of hydrocortisone on the structure of model lung surfactant monolayer by using an in silico approach

Understanding the adsorption mechanism of corticosteroids in the lung surfactant requires the knowledge of corticosteroid molecular interactions with lung surfactant monolayer (LSM). We employed coarse-grained molecular dynamics simulation to explore the action of hydrocortisone on an LSM comprised of a phospholipid, cholesterol and surfactant protein. The structural and dynamical morphology of the lung surfactant monolayer at different surface tensions were investigated to assess the monolayer compressibility. The simulations were also conducted at the two extreme ends of breathing cycles: exhalation (0 mN m^-1 surface tension) and inhalation (20 mN m^-1 surface tension). The impact of surface tension and hydrocortisone concentration on the monolayer compressibility and stability are significant, resulting the monolayer expansion at higher surface tension. However, at low surface tension, the highly compressed monolayer induces monolayer instability in the presence of the drug due to the accumulation of surfactant protein and drug. The constant area per lipid simulation results demonstrate that the surface pressure-area isotherms show a decrease in area-per-lipid with increased drug concentration. The drug-induced expansion causes considerable instability in the monolayer after a specific drug concentration is attained at inhalation breathing condition, whereas, for exhalation breathing, the monolayer gets more compressed, causing the LSM to collapse. The monolayer collapse occurs for inhalation due to the higher drug concentration, whereas for exhalation due to the accumulation of surfactant proteins and drugs. The findings from this study will aid in enhancing the knowledge of molecular interactions of corticosteroid drugs with lung surfactants to treat respiratory diseases.

Concentration-Dependent Effect of the Steroid Drug Prednisolone on a Lung Surfactant Monolayer

The lung surfactant monolayer (LSM) is the main barrier for particles entering the lung, including steroid drugs used to treat lung diseases. The present study combines Langmuir experiments and coarse-grained (CG) molecular dynamics simulations to investigate the concentration-dependent effect of steroid drug prednisolone on the structure and morphology of a model LSM. The surface pressure-area isotherms for the Langmuir monolayers reveal a concentration-dependent decrease in area per lipid (APL). Results from simulations at a fixed surface tension, representing inhalation and exhalation conditions, suggest that at high drug concentrations, prednisolone induces a collapse of the LSM, which is likely caused by the inability of the drug to diffuse into the bilayer. Overall, the monolayer is most susceptible to drug-induced collapse at surface tensions representing exhalation conditions. The presence of cholesterol also exacerbates the instability. The findings of this investigation might be helpful for better understanding the interaction between steroid drug prednisolone and lung surfactants in relation to off-target effects.

The steroid mometasone alters protein containing lung surfactant monolayers in a concentration-dependent manner

Mometasone is an investigational anti-inflammatory steroidal drug to treat inflammation via pulmonary administration. For steroid drugs to be effective they need to be adsorbed by lung surfactants, a thin monolayer at the air-water interface in alveoli that reduces surface tension. Information on the molecular-level interactions of the drug with lung surfactants is useful to understand the mechanism of adsorption. In this study, we use coarse-grained molecular dynamics simulation to understand the concentration-dependent effect of mometasone on a lung surfactant monolayer (LSM) composed of lipids and surfactant proteins, under two different breathing conditions (exhalation, at surface tension 0 mNm^-1 and inhalation, surface tension 20-25 mNm^-1). A series of fixed-APL and fixed-surface tension simulations were used to demonstrate that in the absence of drugs, the model LSM reproduces the surface tensions for the compressed and expanded states, as well as compressibility at different surface tensions. In-depth analysis of simulations of a LSM in the presence of five different drug concentrations shows that mometasone alters the structure and dynamics of the LSM in a concentration-dependent manner. Mometasone induces a collapse in the monolayer that is affected by the surfactant protein and surface tension. Overall, these findings suggest that the surfactant proteins, surface tension and drug concentration are all critical components affecting monolayer stability and drug adsorption. The outcomes of this study may be beneficial for a more in-depth understanding of how mometasone is adsorbed by lung surfactants.

Optimizing respiratory management in preterm infants: a review of adjuvant pharmacotherapies

Adjuvant respiratory therapies in preterm neonates aim to reduce long-term morbidities and mortality. Commonly utilized therapies include caffeine, systemic glucocorticosteroids, inhaled steroids, inhaled bronchodilators, and diuretics. This review discusses the available literature that supports some of these practices and points out where clinical practices are not corroborated by evidence. Therapies with no proven clinical benefit must be weighed against potential adverse effects.

Pulmonary surfactant: a unique biomaterial with life-saving therapeutic applications

Pulmonary surfactant is a complex lipoprotein mixture secreted into the alveolar lumen by type 2 pneumocytes, which is composed by tens of different lipids (approximately 90% of its entire mass) and surfactant proteins (approximately 10% of the mass). It is crucially involved in maintaining lung homeostasis by reducing the values of alveolar liquid surface tension close to zero at end-expiration, thereby avoiding the alveolar collapse, and assembling a chemical and physical barrier against inhaled pathogens. A deficient amount of surfactant or its functional inactivation is directly linked to a wide range of lung pathologies, including the neonatal respiratory distress syndrome. This paper reviews the main biophysical concepts of surfactant activity and its inactivation mechanisms, and describes the past, present and future roles of surfactant replacement therapy, focusing on the exogenous surfactant preparations marketed worldwide and new formulations under development. The closing section describes the pulmonary surfactant in the context of drug delivery. Thanks to its peculiar composition, biocompatibility, and alveolar spreading capability, the surfactant may work not only as a shuttle to the branched anatomy of the lung for other drugs but also as a modulator for their release, opening to innovative therapeutic avenues for the treatment of several respiratory diseases.

An adverse outcome pathway for lung surfactant function inhibition leading to decreased lung function

Inhaled substances, such as consumer products, chemicals at the workplace, and nanoparticles, can affect the lung function in several ways. In this paper, we explore the adverse outcome pathway (AOP) that starts when inhaled substances that reach the alveoli inhibit the function of the lung surfactant, and leads to decreased lung function. Lung surfactant covers the inner surface of the alveoli, and regulates the surface tension at the air-liquid interface during breathing. The inhibition of the lung surfactant function leads to alveolar collapse because of the resulting high surface tension at the end of expiration. The collapsed alveoli can be re-opened by inspiration, but this re-opening causes shear stress on cells covering the alveoli. This can damage the alveolar-capillary membrane integrity, allowing blood components to enter the alveolar airspace. Blood components, such as albumin, can interact with the lung surfactant and further inhibit its function. The collapse of the alveoli is responsible for a decrease in the surface area available for blood oxygenation, and it reduces the volume of air that can be inhaled and exhaled. These different key events lead to decreased lung function, characterized by clinical signs of respiratory toxicity and reduced blood oxygenation. Here we present the weight of evidence that supports the AOP, and we give an overview of the methods available in vitro and in vivo to measure each key event of the pathway, and how this AOP can potentially be used in screening for inhalation toxicity.

The COVID-19 pandemic: a target for surfactant therapy?

INTRODUCTION

The dramatic impact of COVID-19 on humans worldwide has initiated an extraordinary search for effective treatment approaches. One of these is the administration of exogenous surfactant, which is being tested in ongoing clinical trials.

AREAS COVERED

Exogenous surfactant is a life-saving treatment for premature infants with neonatal respiratory distress syndrome. This treatment has also been tested for acute respiratory distress syndrome (ARDS) with limited success possibly due to the complexity of that syndrome. The 60-year history of successes and failures associated with surfactant therapy distinguishes it from many other treatments currently being tested for COVID-19 and provides the opportunity to discuss the factors that may influence the success of this therapy.

EXPERT OPINION

Clinical data provide a strong rationale for using exogenous surfactant in COVID-19 patients. Success of this therapy may be influenced by the mechanical ventilation strategy, the timing of treatment, the doses delivered, the method of delivery and the preparations utilized. In addition, future development of enhanced preparations may improve this treatment approach. Overall, results from ongoing trials may not only provide data to indicate if this therapy is effective for COVID-19 patients, but also lead to further scientific understanding and improved treatment strategies.

Investigating the interactions of corona-free SWCNTs and cell membrane models using sum-frequency generation

The understanding of the interactions between biomolecules and nanomaterials is of great importance in many areas of nanomedicine and bioapplications. Numerous studies in this area have been performed. However, toxicological aspects involving the interaction between phospholipids and carbon nanotubes (CNTs) remain undefined, especially for those cases in which a protein corona is not formed around the nanomaterial (corona-free nanomaterials). This study focuses on the interaction of Langmuir films of dipalmitoylphosphatidylglycerol (DPPG) and dipalmitoylphosphatidylcholine (DPPC) with corona-free, single-walled CNTs. Surface pressure-area isotherms and sum-frequency generation (SFG) vibrational spectroscopy, a non-linear optical technique used to study surfaces and interfaces, were used to investigate the lipid tail orientation and conformation, aiming to understand the interactions between phospholipids and single walled carbon nanotubes functionalized by carboxylic acid (SWCNTs-COOH) at the air-water interface under low ionic strength conditions. Data from isotherms and SFG spectra revealed that the SWCNT adsorption at the air-water interface is induced by the presence of both lipids, although at a lesser extent for DPPG due to its anionic head group, which could result in repulsion of SWCNTs-COOH that also bear a negative charge. Furthermore, lipid monolayers remained conformationally ordered, indicating insertion of SWCNTs into the lipid monolayer. Our results corroborate previous works and simulations in the literature, but made it possible to perform an in-depth investigation of the interaction of these nanomaterials with components of phospholipid membranes.

Effects of intratracheal budesonide during early postnatal life on lung maturity of premature fetal rabbits

AIM

This study aimed to study the effects of intratracheal instillation of budesonide on lung maturity of premature fetal rabbits. The developmental pattern of pulmonary alveoli in rabbits is similar to that in humans.

METHOD

Fetal rabbits were taken out from female rabbits on the 28th day of pregnancy (full term = 31 days) by cesarean section (c-section). The fetal rabbits were divided into four groups: control (normal saline, NS), budesonide (budesonide, BUD), calf pulmonary surfactant for injection (pulmonary surfactant, PS), and calf pulmonary surfactant + budesonide for injection (pulmonary surfactant + budesonide, PS + BUD). All premature rabbits were kept warm after c-section. After 15-min autonomous respiration, a tracheal cannula was implemented for instilling NS, BUD, PS, and PS + BUD. The morphology of lung tissues of premature fetal rabbits was analyzed using optical and electron microscopes. Surfactant protein B (SP-B) mRNA and protein levels in lung tissues were determined using polymerase chain reaction and Western blotting, respectively.

RESULT

Intratracheal instillation of BUD could increase the alveolar area of the fetal rabbits (P < 0.01), decrease the alveolar wall thickness (P < 0.01), and increase the mean density of lamellar bodies (P < 0.05) and SP-B protein levels in type II epithelial cells of pulmonary alveoli (P < 0.05).

CONCLUSION

Intratracheal instillation of BUD during early postnatal life is effective in promoting alveolarization and increasing SP-B expression, the pro-pulmonary maturity of BUD combined with PS is superior to that of BUD or PS alone. However, the long-term effect of BUD on lung development needs further exploration.

Postnatal steroids in extreme preterm infants: Intra-tracheal instillation using surfactant as a vehicle

Chronic Lung Disease (CLD) is a common respiratory morbidity in survivors following extreme preterm birth, and is associated with adverse neurodevelopment in the long term. Besides demographics, multiple risk factors are implicated in the pathogenesis of CLD. However, early lung inflammation appears to be the common pathway that leads to the pathological and clinical changes observed in CLD. Postnatal use of systemic steroids has been successful in reducing the incidence of CLD but resulted in unacceptable adverse neurodevelopmental outcomes. The efficacy of inhaled steroids is not yet established. We review the evidence of tracheal instillation of steroids using surfactant as a lipid vehicle, including published data on drug distribution, in vitro physical studies, and clinical trials in animals and human infants.

In vitro and in vivo characterization of poractant alfa supplemented with budesonide for safe and effective intratracheal administration

BackgroundThe intratracheal (IT) administration of budesonide using surfactant as a vehicle has been shown to reduce the incidence of bronchopulmonary dysplasia (BPD) in preterm infants. The objective of this study was to characterize the in vitro characteristics and in vivo safety and efficacy of the extemporaneous combination of budesonide and poractant alfa.MethodsThe stability, minimum surface tension, and viscosity of the preparation were evaluated by means of high-performance liquid chromatography (HPLC), Wilhelmy balance, and Rheometer, respectively. The safety and efficacy of the IT administration of the mixture were tested in two respiratory distress syndrome (RDS) animal models: twenty-seventh day gestational age premature rabbits and surfactant-depleted adult rabbits.ResultsA pre-formulation trial identified a suitable procedure to ensure the homogeneity and stability of the formulation. Wilhelmy Balance tests clarified that budesonide supplementation has no detrimental effect on poractant alfa surface tension activity. The addition of budesonide to poractant alfa did not affect the physiological response to surfactant treatment in both RDS animal models, and was associated to a significant reduction of lung inflammation in surfactant-depleted rabbits.ConclusionOur in vitro and in vivo analysis suggests that the IT administration of a characterized extemporaneous combination of poractant alfa and budesonide is a safe and efficacious procedure in the context of RDS.

Electronic cigarette vapor alters the lateral structure but not tensiometric properties of calf lung surfactant

Background

Despite their growing popularity, the potential respiratory toxicity of electronic cigarettes (e-cigarettes) remains largely unknown. One potential aspect of e-cigarette toxicity is the effect of e-cigarette vapor on lung surfactant function. Lung surfactant is a mixture of lipids and proteins that lines the alveolar region. The surfactant layer reduces the surface tension of the alveolar fluid, thereby playing a crucial role in lung stability. Due to their small size, particulates in e-cigarette vapor can penetrate the deep lungs and come into contact with the lung surfactant. The current study sought to examine the potential adverse effects of e-cigarette vapor and conventional cigarette smoke on lung surfactant interfacial properties.

Methods

Infasurf^®, a clinically used and commercially available calf lung surfactant extract, was used as lung surfactant model. Infasurf^® films were spread on top of an aqueous subphase in a Langmuir trough with smoke particulates from conventional cigarettes or vapor from different flavors of e-cigarettes dispersed in the subphase. Surfactant interfacial properties were measured in real-time upon surface compression while surfactant lateral structure after exposure to smoke or vapor was examined using atomic force microscopy (AFM).

Results

E-cigarette vapor regardless of the dose and flavoring of the e-liquid did not affect surfactant interfacial properties. In contrast, smoke from conventional cigarettes had a drastic, dose-dependent effect on Infasurf^® interfacial properties reducing the maximum surface pressure from 65.1 ± 0.2 mN/m to 46.1 ± 1.3 mN/m at the highest dose. Cigarette smoke and e-cigarette vapor both altered surfactant microstructure resulting in an increase in the area of lipid multilayers. Studies with individual smoke components revealed that tar was the smoke component most disruptive to surfactant function.

Conclusions

While both e-cigarette vapor and conventional cigarette smoke affect surfactant lateral structure, only cigarette smoke disrupts surfactant interfacial properties. The surfactant inhibitory compound in conventional cigarettes is tar, which is a product of burning and is thus absent in e-cigarette vapor.

Developing an exogenous pulmonary surfactant-glucocorticoids association: Effect of corticoid concentration on the biophysical properties of the surfactant

Glucocorticoids (GCs) are used to treat lung disease. GCs incorporated in an exogenous pulmonary surfactant (EPS) could be an alternative management to improve drug delivery avoiding side effects. In the development of these pharmaceutical products, it is important to know the maximum amount of GC that can be incorporated and if increasing quantities of GCs alter EPS biophysical properties. Formulations containing EPS and beclomethasone, budesonide or fluticasone were analyzed (PL 10mg/ml; GC 1-2mg/ml). The microstructure was evaluated by electron paramagnetic resonance spectroscopy, GCs incorporated were determined by UV absorption and polarized light microscopy and surfactant activity with pulsating bubble surfactometer. We found that GCs have a ceiling of incorporation of around 10wt%, and that the GC not incorporated remains as crystals in the aqueous phase without altering the biophysical properties of the surfactant. This fact is important, because the greater the proportion of GC that EPS can carry, the better the efficiency of this pulmonary GC system.

Efficient Interfacially Driven Vehiculization of Corticosteroids by Pulmonary Surfactant

Pulmonary surfactant is a crucial system to stabilize the respiratory air-liquid interface. Furthermore, pulmonary surfactant has been proposed as an effective method for targeting drugs to the lungs. However, few studies have examined in detail the mechanisms of incorporation of drugs into surfactant, the impact of the presence of drugs on pulmonary surfactant performance at the interface under physiologically meaningful conditions, or the ability of pulmonary surfactant to use the air-liquid interface to vehiculise drugs to long distances. This study focuses on the ability of pulmonary surfactant to interfacially vehiculize corticosteroids such as beclomethasone dipropionate (BDP) or Budesonide (BUD) as model drugs. The main objectives have been to (a) characterize the incorporation of corticosteroids into natural and synthetic surfactants, (b) evaluate whether the presence of corticosteroids affects surfactant functionality, and (c) determine whether surfactant preparations enable the efficient spreading and distribution of BDP and BUD along the air-liquid interface. We have compared the performance of a purified surfactant from porcine lungs and two clinical surfactants: Poractant alfa, a natural surfactant of animal origin extensively used to treat premature babies, and CHF5633, a new synthetic surfactant preparation currently under clinical trials. Both, natural and clinical surfactants spontaneously incorporated corticosteroids up to at least 10% by mass with respect to phospholipid content. The presence of the drugs did not interfere with their ability to efficiently adsorb into air-liquid interfaces and form surface active films able to reach and sustain very low surface tensions (<2 mN/m) under compression-expansion cycling mimicking breathing dynamics. Furthermore, the combination of clinical surfactant with corticosteroids efficiently promoted the active diffusion of the drug to long distances along the air-liquid interface. This effect could not be mimicked by vehiculisation of corticosteroids in liposomes or in micellar emulsions similar to the formulations currently in use to deliver anti-inflammatory corticosteroids through inhalation.

Prednisolone adsorption on lung surfactant models: insights on the formation of nanoaggregates, monolayer collapse and prednisolone spreading

The adsorption of prednisolone on a lung surfactant model was successfully performed using coarse grained molecular dynamics.

Antimicrobial and biophysical properties of surfactant supplemented with an antimicrobial peptide for treatment of bacterial pneumonia

Antibiotic-resistant bacterial infections represent an emerging health concern in clinical settings, and a lack of novel developments in the pharmaceutical pipeline is creating a "perfect storm" for multidrug-resistant bacterial infections. Antimicrobial peptides (AMPs) have been suggested as future therapeutics for these drug-resistant bacteria, since they have potent broad-spectrum activity, with little development of resistance. Due to the unique structure of the lung, bacterial pneumonia has the additional problem of delivering antimicrobials to the site of infection. One potential solution is coadministration of AMPs with exogenous surfactant, allowing for distribution of the peptides to distal airways and opening of collapsed lung regions. The objective of this study was to test various surfactant-AMP mixtures with regard to maintaining pulmonary surfactant biophysical properties and bactericidal functions. We compared the properties of four AMPs (CATH-1, CATH-2, CRAMP, and LL-37) suspended in bovine lipid-extract surfactant (BLES) by assessing surfactant-AMP mixture biophysical and antimicrobial functions. Antimicrobial activity was tested against methillicin-resistant Staphylococcus aureus and Pseudomonas aeruginosa. All AMP/surfactant mixtures exhibited an increase of spreading compared to a BLES control. BLES+CATH-2 mixtures had no significantly different minimum surface tension versus the BLES control. Compared to the other cathelicidins, CATH-2 retained the most bactericidal activity in the presence of BLES. The BLES+CATH-2 mixture appears to be an optimal surfactant-AMP mixture based on in vitro assays. Future directions involve investigating the potential of this mixture in animal models of bacterial pneumonia.

Calf Lung Surfactant Recovers Surface Functionality After Exposure to Aerosols Containing Polymeric Particles

BACKGROUND

Recent studies have shown that colloidal particles can disrupt the interfacial properties of lung surfactant and thus key functional abilities of lung surfactant. However, the mechanisms underlying the interactions between aerosols and surfactant films remain poorly understood, as our ability to expose films to particles via the aerosol route has been limited. The aim of this study was to develop a method to reproducibly apply aerosols with a quantifiable particle dose on lung surfactant films and investigate particle-induced changes to the interfacial properties of the surfactant under conditions that more closely mimic those in vivo.

METHODS

Films of DPPC and Infasurf^® were exposed to aerosols containing polystyrene particles generated using a Dry Powder Insufflator^™. The dose of particles deposited on surfactant films was determined via light absorbance. The interfacial properties of the surfactant were studied using a Langmuir-Wilhelmy balance during surfactant compression to film collapse and cycles of surface compression and expansion at a fast cycling rate within a small surface area range.

RESULTS

Exposure of surfactant films to aerosols led to reproducible dosing of particles on the films. In film collapse experiments, particle deposition led to slight changes in collapse surface pressure and surface area of both surfactants. However, longer interaction times between particles and Infasurf^® films resulted in time-dependent inhibition of surfactant function. When limited to lung relevant surface pressures, particles reduced the maximum surface pressure that could be achieved. This inhibitory effect persisted for all compression-expansion cycles in DPPC, but normal surfactant behavior was restored in Infasurf^® films after five cycles.

CONCLUSIONS

The observation that Infasurf^® was able to quickly restore its function after exposure to aerosols under conditions that better mimicked those in vivo suggests that particle-induced surfactant inhibition is unlikely to occur in vivo due to an aerosol exposure.

Molecular modeling of interaction between lipid monolayer and graphene nanosheets: implications for pulmonary nanotoxicity and pulmonary drug delivery

Understanding how nanoparticles interact with the pulmonary surfactant monolayer (PSM) is of great importance for safe applications in biomedicine and for evaluation of both health and environment impacts.

A detailed investigation on the interactions between magnetic nanoparticles and cell membrane models

The understanding of the interactions between small molecules and magnetic nanoparticles is of great importance for many areas of bioapplications. Although a large array of studies in this area have been performed, aspects involving the interaction of magnetic nanoparticles with phospholipids monolayers, which can better mimic biological membranes, have not yet been clarified. This study was aimed at investigating the interactions between Langmuir films of dipalmitoyl phosphatidylglycerol and dipalmitoyl phosphatidylcholine, obtained on an aqueous subphase, and magnetic nanoparticles. Sum-frequency generation (SFG) vibrational spectroscopy was used to verify the orientation and molecular conformation and to better understand the interactions between phospholipids and the magnetic nanoparticles. Surface pressure-area isotherms and SFG spectroscopy made it possible to investigate the interaction of these nanomaterials with components of phospholipids membranes at the water surface.

Differential effects of cholesterol and budesonide on biophysical properties of clinical surfactant

INTRODUCTION

Corticosteroids have been widely used in clinical medicine as a first-line therapy to modify the inflammatory response in many pulmonary and systemic diseases. Inhaled and intratracheally administered corticosteroids have a particular interest in that their use allows the clinician to circumvent systemic steroid side effects. However, it is vital that corticosteroids delivered via the lungs not interfere with surface activity of the pulmonary surfactant lining layer.

RESULTS

We found differential effects of cholesterol and budesonide on the biophysical properties of a cholesterol-free clinical surfactant preparation, Curosurf. At a low concentration up to 1%, both steroids play a similar role of fluidizing the surfactant film. However, when steroid concentration is increased to 10%, cholesterol induces a unique phase transition that abolishes the surface activity of the Curosurf film. By contrast, 10% budesonide simply fluidizes the film, thus having only limited effects on surface activity.

DISCUSSION

Together with those of a previous study using a cholesterol-containing surfactant, our findings suggest that cholesterol-free surfactant preparations may be more advantageous than cholesterol-containing preparations as a carrier of budesonide because a larger amount of the drug may be delivered to the lungs without significantly compromising the surface activity of pulmonary surfactant.

METHODS

Langmuir balance was used to study the effect of cholesterol and budesonide added at different concentrations on surface activity of Curosurf. Atomic force microscopy (AFM) was used to reveal their effects on the interfacial molecular organization and lateral structure of Curosurf films.