The electrodeposition of silver composites using deep eutectic solvents

Circular recycling concept for silver recovery from photovoltaic cells in Ethaline deep eutectic solvent

Reducing the number of stages, energy costs and carbon footprint of recycling processes is essential to overcome environmental challenges. The interest in replacing the acids used in traditional hydrometallurgical methods with deep eutectic solvents (DES), which are less toxic and more environmentally friendly, has been growing. The aim of this study is to estimate the potential use of this class of solvents in an ionometallurgical process of leaching and electrodeposition to recover silver as part of the recycling of solar panels, a major challenge of the years to come. In the present work, a circular recycling concept based on an iron redox shuttle was studied to leach and recover silver via electrodeposition. Different DESs were evaluated in combination with a hexahydrated iron(iii) chloride oxidizing agent. Ethaline DES has gained significant interest as it can attain a high silver leaching efficiency of 99.9% on crystallized silicon cell scraps at 75 °C. The promising results led to a comprehensive study of limits of this chemical system, focusing on the relation between the concentration of species (iron and water), the interfacial potential of silver (electrochemical measurements), and surface evolution (X-ray photoelectron spectroscopy analysis). Silver leaching was determined as a mixed control mechanism involving chemical and species diffusion dependence. The concentration of iron(iii) chloride appeared crucial, determining the kinetic of formation of a poorly soluble AgCl layer. Electrodeposition from leachate highlighted the need to use an oxygen-free atmosphere to produce high-quality silver. Finally, leaching at 75 °C and electrodeposition at 50 °C of silver from crystallized silicon cell scraps were demonstrated using Ethaline (1 : 2) + FeCl3·6H2O (0.12 mol L-1) under an argon atmosphere.

Molecular Resolution Nanostructure and Dynamics of the Deep Eutectic Solvent-Graphite Interface as a Function of Potential

Interest in deep eutectic solvents (DESs), particularly for electrochemical applications, has boomed in the past decade because they are more versatile than conventional electrolyte solutions and are low cost, renewable, and non-toxic. The molecular scale lateral nanostructures as a function of potential at the solid-liquid interface-critical design parameters for the use of DESs as electrochemical solvents-are yet to be revealed. In this work, in situ amplitude modulated atomic force microscopy complemented by molecular dynamics simulations is used to probe the Stern and near-surface layers of the archetypal and by far most studied DES, 1:2 choline chloride:urea (reline), at the highly orientated pyrolytic graphite surface as a function of potential, to reveal highly ordered lateral nanostructures with unprecedented molecular resolution. This detail allows identification of choline, chloride, and urea in the Stern layer on graphite, and in some cases their orientations. Images obtained after the potential is switched from negative to positive show the dynamics of the Stern layer response, revealing that several minutes are required to reach equilibrium. These results provide valuable insight into the nanostructure and dynamics of DESs at the solid-liquid interface, with implications for the rational design of DESs for interfacial applications.

Natural Deep Eutectic Solvents in the Synthesis of Inorganic Nanoparticles

Natural deep eutectic solvents (NDESs), as a new type of green solvent, are used in many fields, including industry in extraction processes, medicine, pharmaceuticals, metallurgy, electrodeposition, separations, gas capture, biocatalysis and nanotechnology. Mainly due to their properties, such as simple preparation, environmental friendliness, biocompatibility and multifunctionality, they are being used in various fields of industry. This review aims to provide insight into the applications of natural deep eutectic solvents, specifically in nanotechnology processes. It focuses on the description of NDES and how their physicochemical properties are used to obtain functional nanomaterials, including metals, metal oxides and salts. It highlights how the use of NDESs to obtain a wide range of inorganic nanoparticles enables the elimination of disadvantages of traditional methods of obtaining them, including reducing energy consumption and functionalising nanoparticles in situ. In conclusion, recent advances and future directions in the development and applications of NDESs in nanotechnology are discussed with the aim of identifying unexplained scientific questions that can be investigated in the future.

Electrodeposition of Silver Nanoparticles on Indium-Doped Tin Oxide Using Hydrogel Electrolyte for Hydrogen Peroxide Sensing

Nanoparticles are used in various fields, including fuel cells, energy conversion devices, and sensors, because of their large surface area and excellent catalytic properties. Although various methods of synthesizing nanoparticles are available, the most popular is the solution-phase reduction of metal ions. Electrodeposition is a method of reducing metal ions in solution and is widely used because of its various advantages. In this study, Ag nanoparticles with a narrow size distribution were evenly dispersed on the surface of an electrode by applying electrodeposition in an agarose hydrogel medium instead of in solution, confirming the feasibility of Ag deposition in agarose hydrogel, even at a lower reduction potential than that in solution. These results are attributed to the electrolyte effect owing to the hydrophilic backbone of the agarose hydrogel and the gel effect, which reduces unexpected convection. H₂O₂ was detected by using the Ag nanoparticles synthesized in agarose hydrogel, and the limit of detection for H₂O₂ was found to be 4.82 µM, with a dynamic range of 1-500 µM. The nanoparticle synthesis platform proposed in this study is expected to be actively used for the synthesis of other metal/nonmetal nanoparticles.

Recent Advances in the Synthesis of Inorganic Materials Using Environmentally Friendly Media

Deep Eutectic Solvents have gained a lot of attention in the last few years because of their vast applicability in a large number of technological processes, the simplicity of their preparation and their high biocompatibility and harmlessness. One of the fields where DES prove to be particularly valuable is the synthesis and modification of inorganic materials-in particular, nanoparticles. In this field, the inherent structural inhomogeneity of DES results in a marked templating effect, which has led to an increasing number of studies focusing on exploiting these new reaction media to prepare nanomaterials. This review aims to provide a summary of the numerous and most recent achievements made in this area, reporting several examples of the newest mixtures obtained by mixing molecules originating from natural feedstocks, as well as linking them to the more consolidated methods that use "classical" DES, such as reline.

Water-Induced Restructuring of the Surface of a Deep Eutectic Solvent

We study the molecular-scale structure of the surface of Reline, a DES made from urea and choline chloride, using heterodyne-detected vibrational sum frequency generation (HD-VSFG). Reline absorbs water when exposed to the ambient atmosphere, and following structure-specific changes at the Reline/air interface is crucial and difficult. For Reline (dry, 0 wt %, w/w, water) we observe vibrational signatures of both urea and choline ions at the surface. Upon increase of the water content, there is a gradual depletion of urea from the surface, an enhanced alignment, and an enrichment of the surface with choline cations, indicating surface speciation of ChCl. Above 40% w/w water content, choline cations abruptly deplete from the surface, as evidenced by the decrease of the vibrational signal of the -CH2- groups of choline and the rapid rise of a water signal. Above 60% w/w water content, the surface spectrum of aqueous Reline becomes indistinguishable from that of neat water.

Is ethaline a deep eutectic solvent?

The ethaline composition lies in the ChCl-saturated region of the phase diagram which explains why ChCl precipitates in this solvent.

Ionic Liquids and Deep Eutectics as a Transformative Platform for the Synthesis of Nanomaterials

Ionic liquids (ILs) are becoming a revolutionary synthesis medium for inorganic nanomaterials, permitting more efficient, safer and environmentally benign preparation of high quality products. A smart combination of ILs and...

Thermal, chemical, electrochemical, radiolytic and biological stability of ionic liquids and deep eutectic solvents

Ionic liquids (ILs) and deep eutectic solvents (DESs) are regarded as two kinds of novel solvents with high tunability and they exist in liquid-state for a wide range of temperature....

Bulk and interfacial nanostructure and properties in deep eutectic solvents: Current perspectives and future directions

Deep eutectic solvents (DESs) are a tailorable class of solvents that are rapidly gaining scientific and industrial interest. This is because they are distinct from conventional molecular solvents, inherently tuneable via careful selection of constituents, and possess many attractive properties for applications, including catalysis, chemical extraction, reaction media, novel lubricants, materials chemistry, and electrochemistry. DESs are a class of solvents composed solely of hydrogen bond donors and acceptors with a melting point lower than the individual components and are often fluidic at room temperature. A unique feature of DESs is that they possess distinct bulk liquid and interfacial nanostructure, which results from intra- and inter-molecular interactions, including coulomb forces, hydrogen bonding, van der Waals interactions, electrostatics, dispersion forces, and apolar-polar segregation. This nanostructure manifests as preferential spatial arrangements of the different species, and exists over several length scales, from molecular- to nano- and meso-scales. The physicochemical properties of DESs are dictated by structure-property relationships; however, there is a significant gap in our understanding of the underlying factors which govern their solvent properties. This is a major limitation of DES-based technologies, as nanostructure can significantly influence physical properties and thus potential applications. This perspective provides an overview of the current state of knowledge of DES nanostructure, both in the bulk liquid and at solid interfaces. We provide definitions which clearly distinguish DESs as a unique solvent class, rather than a subset of ILs. An appraisal of recent work provides hints towards trends in structure-property relationships, while also highlighting inconsistencies within the literature suggesting new research directions for the field. It is hoped that this review will provide insight into DES nanostructure, their potential applications, and development of a robust framework for systematic investigation moving forward.

Self-assembly of ionic and non-ionic surfactants in type IV cerium nitrate and urea based deep eutectic solvent

Understanding and manipulating micelle morphology are key to exploiting surfactants in various applications. Recent studies have shown surfactant self-assembly in a variety of Deep Eutectic Solvents (DESs) where both the nature of surfactants and the interaction of the surfactant molecule with the solvent components influence the size, shape, and morphology of the micelles formed. So far, micelle formation has only been reported in type III DESs, consisting solely of organic species. In this work, we have explored the self-assembly of cationic surfactant dodecyl trimethylammonium nitrate/bromide (C₁₂TANO₃/C₁₂TAB), anionic surfactant sodium dodecyl sulfate (SDS), and non-ionic surfactants hexaethylene glycol monododecyl ether (C₁₂EO₆) and octaethylene glycol monohexadecyl ether (C₁₆EO₈) in a type IV DES comprising metal salt, cerium (III) nitrate hexahydrate, and a hydrogen bond donor, urea, in the molar ratio 1:3.5. C₁₂TANO₃, C₁₂TAB, C₁₂EO₆, and C₁₆EO₈ form spherical micelles in the DES with the micelle size dependent on both the surfactant alkyl chain length and the head group, whereas SDS forms cylindrical micelles. We hypothesize that the difference in the micelle shape can be explained by counterion stabilization of the SDS headgroup by polycations in the DES compared to the nitrate/bromide anion interaction in the case of cationic surfactants or molecular interaction of the urea and the salting out effect of (CeNO₃)₃ in the DES on the alkyl chains/polyethoxy headgroup for non-ionic surfactants. These studies deepen our understanding of amphiphile self-assembly in this novel, ionic, and hydrogen-bonding solvent, raising the opportunity to use these structures as liquid crystalline templates to generate porosity in metal oxides (ceria) that can be synthesized using these DESs.

The Impact of Water on the Lateral Nanostructure of a Deep Eutectic Solvent–Solid Interface

Deep eutectic solvents (DESs) are tuneable solvents with attractive properties for numerous applications. Their structure–property relationships are still under investigation, especially at the solid–liquid interface. Moreover, the influence of water on interfacial nanostructure must be understood for process optimization. Here, we employ a combination of atomic force microscopy and molecular dynamics simulations to determine the lateral and surface-normal nanostructure of the DES choline chloride:glycerol at the mica interface with different concentrations of water. For the neat DES system, the lateral nanostructure is driven by polar interactions. The surface adsorbed layer forms a distinct rhomboidal symmetry, with a repeat spacing of ~0.9 nm, comprising all DES species. The adsorbed nanostructure remains largely unchanged in 75 mol-% DES compared with pure DES, but at 50 mol-%, the structure is broken and there is a compromise between the native DES and pure water structure. By 25 mol-% DES, the water species dominates the adsorbed liquid layer, leaving very few DES species aggregates at the interface. In contrast, the near-surface surface-normal nanostructure, over a depth of ~3 nm from the surface, remains relatively unchanged down to 25 mol-% DES where the liquid arrangement changed. These results demonstrate not only the significant influence that water has on liquid nanostructure, but also show that there is an asymmetric effect whereby water disrupts the nanostructure to a greater degree closer to the surface. This work provides insight into the complex interactions between DES and water and may enhance their optimization for surface-based applications.

Fracto-eutectogels: SDS fractal dendrites via counterion condensation in a deep eutectic solvent

Glyceline, a deep eutectic solvent comprising glycerol and choline chloride, is a green nonaqueous solvent with potential industrial applications. Molecular mechanisms of surfactant self-assembly in deep eutectic solvents are expected to differ from those in their constituent polar components and are not well understood. Here we report the observation of self-assembled SDS fractal dendrites with dimensions up to ∼mm in glyceline at SDS concentrations as low as cSDS ∼ 0.1 wt%. The prevalence of these dendritic fractal aggregates led to the formation of a gel phase at SDS concentrations above ≥1.9 wt% (the critical gelation concentration cCGC). The gel microscopic structure was visualised using polarised light microscopy (PLM); rheology measurements confirmed the formation of a colloidal gel, where the first normal stress difference was negative and the elastic modulus was dominant. Detailed nano-structural characterisation by small-angle neutron scattering (SANS) further confirmed the presence of fractal aggregates. Such SDS aggregation or gelation has not been observed in water at such low surfactant concentrations, whereas SDS has been reported to form lamellar aggregates in glycerol (a component of glyceline). We attribute the formation of the SDS fractal dendrites to the condensation of counterions (i.e. the choline ions) around the SDS aggregates - a diffusion-controlled process, leading to the aggregate morphology observed. These unprecedented results shed light on the molecular mechanisms of surfactant self-assembly in deep eutectic solvents, important to their application in industrial formulation.

Prototropic forms of hydroxy derivatives of naphthoic acid within deep eutectic solvents

Deep eutectic solvents (DESs) are not only recognized as benign and inexpensive alternatives to ionic liquids, they offer a unique solvation milieu due to the varying H-bonding capabilities of their constituents. Proton-transfer involving a probe and its prototropic forms strongly depend on the H-bonding nature of the solubilizing media. The presence of prototropic forms of three probes, 1-hydroxy-2-naphthoic acid (1,2-HNA), 3-hydroxy-2-naphthoic acid (3,2-HNA), and 6-hydroxy-2-naphthoic acid (6,2-HNA) is investigated in two DESs, named ChCl:urea and ChCl:glycerol, constituted of H-bond acceptor choline chloride and different H-bond donors, urea and glycerol, respectively, in a 1 : 2 mole ratio under ambient conditions. While 1,2-HNA and 3,2-HNA exhibit an intramolecular H-bonding ability, 6,2-HNA does not. In contrast to common polar solvents, where the monoanionic emitting form of 1,2-HNA is also supported along with the neutral one, in both the DESs only the neutral emitting form exists. Addition of acid to the two DESs, respectively, fail to generate the monocationic form of the probe. Addition of a base to ChCl:urea results in the generation of the monoanionic form; even a very high strength of the base fails to generate the monoanionic emitting form in ChCl:glycerol. Relatively higher H-bond donating acidity of ChCl:glycerol results in added hydroxyl getting involved in H-bonding with alcohol functionalities of ChCl:glycerol leading to the absence of proton extraction to create the monoanionic form of the probe. Only the monoanionic emitting form of 3,2-HNA is present in ChCl:urea; in ChCl:glycerol, due to its higher H-bond donor acidity, the neutral emitting form is also detected. Addition of high strength of acid to ChCl:urea does result in formation of the neutral emitting form. Addition of an aqueous base results in the formation of the dianionic form of 3,2-HNA in ChCl:urea; however, in ChCl:glycerol, the added base fails to convert the neutral form of this probe to the monoanionic form as efficiently as that in ChCl:urea. The monoanionic (carboxylate) form of 6,2-HNA exits in ChCl:urea, whereas the neutral form is present in ChCl:glycerol due to its higher H-bond donating acidity. Addition of an acid can induce a shift in prototropic equilibrium towards the neutral form of 6,2-HNA in ChCl:urea; no change is observed in the behavior of this probe in ChCl:glycerol as the acid is added. Both the DESs support the dianionic form of 6,2-HNA in the presence of the base; the added base helps extract both -OH and -COOH protons of this probe. The H-bond donor component of the DES is clearly established to play a critical role in the prototropic behavior of the probe.

Nanostructure of a deep eutectic solvent at solid interfaces

HYPOTHESIS

Deep eutectic solvents (DESs) are an attractive class of tunable solvents. However, their uptake for relevant applications has been limited due to a lack of detailed information on their structure-property relationships, both in the bulk and at interfaces. The lateral nanostructure of the DES-solid interfaces is likely to be more complex than previously reported and requires detailed, high-resolution investigation.

EXPERIMENTS

We employ a combination of high-resolution amplitude-modulated atomic force microscopy and molecular dynamics simulations to elucidate the lateral nanostructure of a DES at the solid-liquid interface. Specifically, the lateral and near-surface nanostructure of the DES choline chloride:glycerol is probed at the mica and highly-ordered pyrolytic graphite interfaces.

FINDINGS

The lateral nanostructure of the DES-solid interface is heterogeneous and well-ordered in both systems. At the mica interface, the DES is strongly ordered via polar interactions. The adsorbed layer has a distinct rhomboidal symmetry with a repeat spacing of ~0.9 nm comprising all DES species. At the highly ordered pyrolytic graphite interface, the adsorbed layer appears distinctly different, forming an apolor-driven row-like structure with a repeat spacing of ~0.6 nm, which largely excludes the chloride ion. The interfacial nanostructure results from a delicate balance of substrate templating, liquid-liquid interactions, species surface affinity, and packing constraints of cations, anions, and molecular components within the DES. For both systems, distinct near-surface nanostructural layering is observed, which becomes more pronounced close to the substrate. The surface nanostructures elucidated here significantly expand our understanding of DES interfacial behavior and will enhance the optimization of DES systems for surface-based applications.

Greener, Faster, Stronger: The Benefits of Deep Eutectic Solvents in Polymer and Materials Science

Deep eutectic solvents (DESs) represent an emergent class of green designer solvents that find numerous applications in different aspects of chemical synthesis. A particularly appealing aspect of DES systems is their simplicity of preparation, combined with inexpensive, readily available starting materials to yield solvents with appealing properties (negligible volatility, non-flammability and high solvation capacity). In the context of polymer science, DES systems not only offer an appealing route towards replacing hazardous volatile organic solvents (VOCs), but can serve multiple roles including those of solvent, monomer and templating agent-so called "polymerizable eutectics." In this review, we look at DES systems and polymerizable eutectics and their application in polymer materials synthesis, including various mechanisms of polymer formation, hydrogel design, porous monoliths, and molecularly imprinted polymers. We provide a comparative study of these systems alongside traditional synthetic approaches, highlighting not only the benefit of replacing VOCs from the perspective of environmental sustainability, but also the materials advantage with respect to mechanical and thermal properties of the polymers formed.

Deep Eutectic Solvents: A Review of Fundamentals and Applications

Deep eutectic solvents (DESs) are an emerging class of mixtures characterized by significant depressions in melting points compared to those of the neat constituent components. These materials are promising for applications as inexpensive "designer" solvents exhibiting a host of tunable physicochemical properties. A detailed review of the current literature reveals the lack of predictive understanding of the microscopic mechanisms that govern the structure-property relationships in this class of solvents. Complex hydrogen bonding is postulated as the root cause of their melting point depressions and physicochemical properties; to understand these hydrogen bonded networks, it is imperative to study these systems as dynamic entities using both simulations and experiments. This review emphasizes recent research efforts in order to elucidate the next steps needed to develop a fundamental framework needed for a deeper understanding of DESs. It covers recent developments in DES research, frames outstanding scientific questions, and identifies promising research thrusts aligned with the advancement of the field toward predictive models and fundamental understanding of these solvents.

Molecular approach about the effect of water on the electrochemical behaviour of Ag+ ions in urea-choline chloride-water mixture

The water influence on electrochemical behaviour of Ag⁺ ions in urea and choline chloride mixture was investigated by cyclic voltammetry technique, while the molecular insights about the investigated systems were obtained from molecular dynamic (MD) simulation. The water content was variated from 0 up to 10% (v/v). Cyclic voltammetry technique showed that the peak potential for Ag⁺/Ag redox couples shifted in direction to more positive potentials with the gradual increase of water content in solution, indicating that the addition of water electrocatalyses the kinetics of the reduction of Ag⁺ ions. The MD simulations demonstrated that water molecules do not interact strongly with Ag⁺ ions but induce a small reduction in the number of urea molecules around of the ion and that the water molecules adjust to free spaces in the mixture.

An electrochemical sensor based on an Eriochrome Black T polymer and deep eutectic solvent for the simultaneous determination of omeprazole and lansoprazole

Here we report the fabrication of an electrochemical sensor for the simultaneous determination of the concentrations of omeprazole (OMZ) and lansoprazole (LAN) in biological fluids and pharmaceuticals in Britton-Robinson buffer solution (pH 6.0). The sensor was prepared by bulk modifying a carbon paste electrode with deep eutectic solvent (DES), followed by carrying out electropolymerization of Eriochrome Black T (EBT) at this electrode. The presence of DES increased the extent of the polymerization of EBT on the surface of the electrode, and this increase led to better OMZ and LAN electron transfer kinetics at the electrode surface. The modified electrode was evaluated and characterized by performing cyclic voltammetry, electrochemical impedance spectroscopy, scanning electronic microscopy, and Fourier-transform infrared spectroscopy. The best responses were obtained in drug-free Britton-Robinson buffer solution (pH 6.0) after 600 s of stirring at the open circuit potential. Linear relationships were obtained between the anodic peak currents and the concentrations of OMZ and LAN in the ranges of 0.010-0.276 and 0.010-0.300 μM, with detection limits of 0.006 and 0.009 μM, respectively. Satisfactory results were also obtained for the analysis of OMZ and LAN in real samples. The excellent sensitivity and easy regeneration and modification of this electrode with DES followed by the polymerization of EBT make this electrode relatively highly applicable for flow methods.

A Quasi-Solid-State Tristate Reversible Electrochemical Mirror Device with Enhanced Stability

Reversible electrochemical mirror (REM) electrochromic devices with electrochemical tunability in multiple optical states are exciting alternatives to conventional electrochromic smart windows. Electrochromic devices are studied extensively, yet widespread adoptions have not been achieved due to problems associated with durability, switching speed, limited options on optical states, and cost. In this study, a REM electrochromic device based on CuSn alloy is developed, which offers highly reversible switching between transparent, greyish-blue, and mirror states via reversible electrodeposition and dissolution. The alloying element, Sn acts as an electrochemical mediator, which facilitates the electrodeposition and dissolution of Cu. The CuSn-based REM device shows superior cycling stability for 2400 cycles (transmittance mode) and 1000 cycles (reflectance mode). The electrodeposited CuSn alloy film is resistant to surface oxidation in ambient air, with a 2.9% difference in reflectance at 2000 nm after 3 days. In addition, the alloy film exhibits excellent NIR reflectance property with thermal modulation of 18.5 °C at a high temperature of 180 °C. The REM device with zero power consumption maintains its mirror state for at least 100 min, making it a promising candidate for energy-efficient applications.

Influence of Hydration on the Structure and Interactions of Ethaline Deep-Eutectic Solvent: A Spectroscopic and Computational Study

Deep-eutectic solvents (DESs) are regarded as alternative green solvents to ionic liquids. In this work we report the structural properties and hydrogen bonding (H-bonding) interactions of an aqueous DES system. The used DES, ethaline (ETH), is composed of choline chloride and ethylene glycol (EG) in 1 : 2 molar ratio. The investigations were carried out by FTIR spectroscopy combined with quantum chemical calculations. Excess spectroscopy and two-dimensional correlation spectroscopy (2D-COS) were used to explore the data in detail. The results showed that, upon mixing, ETH transforms to EG dimers and trimers and D₂ O clusters transform to various ETH-D₂ O complexes. Theoretical calculations show that water molecules insert between the anion and cation of ETH, break the strong doubly ionic Cl^-… H-O_Ch+ H-bond, share charges of the ions and form H-bond with them, thus modulate the interaction properties of ETH. This study deepens our molecular-level understanding of the system and would shed light on its applications.

A Review on Surface-Enhanced Raman Scattering

Surface-enhanced Raman scattering (SERS) has become a powerful tool in chemical, material and life sciences, owing to its intrinsic features (i.e., fingerprint recognition capabilities and high sensitivity) and to the technological advancements that have lowered the cost of the instruments and improved their sensitivity and user-friendliness. We provide an overview of the most significant aspects of SERS. First, the phenomena at the basis of the SERS amplification are described. Then, the measurement of the enhancement and the key factors that determine it (the materials, the hot spots, and the analyte-surface distance) are discussed. A section is dedicated to the analysis of the relevant factors for the choice of the excitation wavelength in a SERS experiment. Several types of substrates and fabrication methods are illustrated, along with some examples of the coupling of SERS with separation and capturing techniques. Finally, a representative selection of applications in the biomedical field, with direct and indirect protocols, is provided. We intentionally avoided using a highly technical language and, whenever possible, intuitive explanations of the involved phenomena are provided, in order to make this review suitable to scientists with different degrees of specialization in this field.

Influence of Hydration on the Structure of Reline Deep Eutectic Solvent: A Molecular Dynamics Study

In this article, we have performed an all-atom molecular dynamics simulation study to investigate the influence of water on the molecular level arrangement of reline deep eutectic solvent for different hydration levels ranging from 3.4 to 58.1 wt % of water and complemented the observations of recently measured neutron scattering experimental data. This study is particularly important because water is being introduced as a second hydrogen bond donor/acceptor in reline, wherein the structure is primarily governed by hydrogen bonding and electrostatic interactions. We have analyzed the simulated X-ray scattering structure functions, their partial components, and hydrogen bonding interactions to understand the effects of water on various intermolecular interactions in reline-water mixtures. It is observed that at lower hydration level, reline structure is qualitatively retained. At higher hydration level, most water molecules preferentially solvate chloride anions and ammonium group of choline cations mostly impacting choline-choline, choline-chloride, and chloride-chloride interactions. The present study reveals that at and above 41 wt % of water, the molecular arrangement of reline drastically changes and set to transition from reline to an aqueous solution of reline components with further increase in the hydration level. Hydrogen bond analysis reveals the presence of strong chloride-water H-bonding interaction, which gradually replaces choline-chloride and urea-chloride hydrogen bondings as the hydration level in the mixture increases.

Extended hierarchical solvent perturbations from curved surfaces of mesoporous silica particles in a deep eutectic solvent

HYPOTHESIS

Many applications of deep eutectic solvents (DES) rely on exploitation of their unique yet complex liquid structures. Due to the ionic nature of the DES components, their diffuse structures are perturbed in the presence of a charged surface. We hypothesize that it is possible to perturb the bulk DES structure far (>100 nm) from a curved, charged surface with mesoscopic dimensions.

EXPERIMENTS

We performed in situ, synchrotron-based ultra-small angle X-ray scattering (USAXS) experiments to study the solvent distribution near the surface of charged mesoporous silica particles (MPS) (≈0.5 µm in diameter) suspended in both water and a common type of DES (1:2 choline Cl-:ethylene glycol).

FINDINGS

A careful USAXS analysis reveals that the perturbation of electron density distribution within the DES extends ≈1 μm beyond the particle surface, and that this perturbation can be manipulated by the addition of salt ions (AgCl). The concentration of the pore-filling fluid is greatly reduced in the DES. Notably, we extracted the real-space structures of these fluctuations from the USAXS data using a simulated annealing approach that does not require a priori knowledge about the scattering form factor, and can be generalized to a wide range of complex small-angle scattering problems.

Improved effect of deep eutectic solvents on polymeric film of surfactant: application in determination and discrimination of dihydroxybenzene isomers as model molecules

The simultaneous determination of hydroquinone and catechol with different deep eutectic solvents (DESs) employed in the polymerization step of cetyltrimethylammonium bromide (CTAB) on an oxidized glassy carbon electrode is studied.