Energy transfer cassettes based on organic fluorophores: construction and applications in ratiometric sensing

Novel ratiometric fluorescent probe with large Stokes shift for selective sensing and imaging of Zn2+ in live cell

A novel ratiometric fluorescent probe, namely 5-[(3-dicyanoylidene -5.5-dimethyl) cyclohexenyl-1-ethenyl] salicylaldehyde-3'-hydroxybenzohydrazone (DCSH) is presented for the selective sensing of Zn2+ ion in acetonitrile/water (2/3, pH 7.4) solution. Introducing Zn2+ ions notably caused the peak emission of DCSH to shift from 560 nm to 646 nm, accompanied with a significant enhancement of its intensity. A vivid change in fluorescence color from yellow to red facilitated the immediate identification of Zn2+ ions by visual observation. DCSH exhibits substantial Stokes shifts (110 and 196 nm), rapid detection capability (within 10 s) and high sensitivity to Zn2+ ions, achieving a limit of detection of 31.2 nM. The response mechanism is supposed to involve the block of C = N bond isomerization and excited state intramolecular proton transfer (ESIPT) along with the enhancement of fluorescence through chelation (CHEF) effect. DCSH was effectively utilized for ratiometric fluorescence imaging to monitor exogenous Zn2+ concentrations in HeLa cells. Significantly, DCSH is capable of monitoring elevated levels of Zn2+ ion during apoptosis induced by L-Buthionine sulfoximine (BSO).

Synthesis and optimization of chitosan-incorporated semisynthetic polymer/α-Fe2O3 nanoparticle hybrid polymer to explore optimal efficacy of fluorescence resonance energy transfer/charge transfer for Co(II) and Ni(II) sensing

Initially, four synthetic fluorescent polymers (SFPs) are synthesized from α-methacrylic acid and methanolacrylamide monomers carrying -C(=O)OH and -C(=O)NH subfluorophores, respectively. Among SFPs, ∼1:1 incorporation of subfluorophores in the optimum SFP3 is explored by spectroscopic analyses. Subsequently, chitosan is incorporated in SFP3 to produce five semi-synthetic fluorescent polymers (SSFPs). The maximum incorporation of chitosan in SSFP4 is supported by different spectroscopies. In SSFP4, strong electrostatic interactions among polar functionalities of chitosan and synthetic polymer favor resonance-associated charge transfer (RCT) from SSFP4-(amide) to SSFP4-(canonical). Finally, three hybrid fluorescent polymers (HFPs) are fabricated encapsulating iron-oxide nanoparticle within SSFP4. The maximum proportion of hematite (α-Fe2O3) phase in HFPs is explored by spectroscopic, magnetometric, microscopic, and light scattering studies. HFP2 shows local/RCT/fluorescence resonance energy transfer (FRET) emission at 393/460/570 nm. In HFP2, FRET, RCT, and ratiometric pH-sensing within 3.0-6.5 phenomena are explored by solvent polarity effects, time-correlated single photon counting, quantum yield measurements, alongside I431/I460 vs pH plots. RCT and FRET emissions of HFP2 are utilized for selective sensing of Co(II)/Ni(II) with limits of detection of 4.990 ppb (460 nm)/4.353 ppb (570 nm) and 45.041 ppb (428 nm)/29.617 ppb (527 nm) in organic and aqueous solutions, respectively.

Exploring the landscape of FRET-based molecular sensors: Design strategies and recent advances in emerging applications

Probing biological processes in living organisms that could provide one-of-a-kind insights into real-time alterations of significant physiological parameters is a formidable task that calls for specialized analytic devices. Classical biochemical methods have significantly aided our understanding of the mechanisms that regulate essential biological processes. These methods, however, are typically insufficient for investigating transient molecular events since they focus primarily on the end outcome. Fluorescence resonance energy transfer (FRET) microscopy is a potent tool used for exploring non-invasively real-time dynamic interactions between proteins and a variety of biochemical signaling events using sensors that have been meticulously constructed. Due to their versatility, FRET-based sensors have enabled the rapid and standardized assessment of a large array of biological variables, facilitating both high-throughput research and precise subcellular measurements with exceptional temporal and spatial resolution. This review commences with a brief introduction to FRET theory and a discussion of the fluorescent molecules that can serve as tags in different sensing modalities for studies in chemical biology, followed by an outlining of the imaging techniques currently utilized to quantify FRET highlighting their strengths and shortcomings. The article also discusses the various donor-acceptor combinations that can be utilized to construct FRET scaffolds. Specifically, the review provides insights into the latest real-time bioimaging applications of FRET-based sensors and discusses the common architectures of such devices. There has also been discussion of FRET systems with multiplexing capabilities and multi-step FRET protocols for use in dual/multi-analyte detections. Future research directions in this exciting field are also mentioned, along with the obstacles and opportunities that lie ahead.

Application of RET Approach for Ratiometric Response Enhancement of ICT Fluorescent Hg2+ Probe based on Crown-containing Styrylpyridinium Dye

Styrylpyridinium dye bearing azadithia-15-crown-5 ether receptor group SP and 4-alkoxy-1,8-naphthalimide fluorophore were linked using copper-catalyzed azide-alkyne cycloaddition click reaction to afford dyad compound NI-SP. Chemosensor NI-SP exhibited selective ratiometric fluorescent response to the presence of Hg2+ in aqueous solution due to the interplay between resonance energy transfer (RET) and intramolecular charge transfer (ICT) processes occurred upon excitation. The observed switching of the ratio of emission intensities in the blue and red channels R was higher than in the case of monochromophoric styrylpyridine derivative SP showing ratiometric response based on ICT mechanism only. Biological studies revealed that NI-SP penetrates into human lung adenocarcinoma A549 cells and accumulates in cytoplasm and lysosomes. When cells were pre-incubated with mercury (II) perchlorate, the ratio R was increased 2.6 times, which enables detection of intracellular Hg2+ ions and their quantitative analysis in the 0.7-6.0 μM concentration range.

Ex Tenebris Lux: Illuminating Reactive Oxygen and Nitrogen Species with Small Molecule Probes

Reactive oxygen and nitrogen species are small reactive molecules derived from elements in the air─oxygen and nitrogen. They are produced in biological systems to mediate fundamental aspects of cellular signaling but must be very tightly balanced to prevent indiscriminate damage to biological molecules. Small molecule probes can transmute the specific nature of each reactive oxygen and nitrogen species into an observable luminescent signal (or even an acoustic wave) to offer sensitive and selective imaging in living cells and whole animals. This review focuses specifically on small molecule probes for superoxide, hydrogen peroxide, hypochlorite, nitric oxide, and peroxynitrite that provide a luminescent or photoacoustic signal. Important background information on general photophysical phenomena, common probe designs, mechanisms, and imaging modalities will be provided, and then, probes for each analyte will be thoroughly evaluated. A discussion of the successes of the field will be presented, followed by recommendations for improvement and a future outlook of emerging trends. Our objectives are to provide an informative, useful, and thorough field guide to small molecule probes for reactive oxygen and nitrogen species as well as important context to compare the ecosystem of chemistries and molecular scaffolds that has manifested within the field.

Pressure-enhanced sensing of tissue oxygenation via endogenous porphyrin: Implications for dynamic visualization of cancer in surgery

Fluorescence guidance is routinely used in surgery to enhance perfusion contrast in multiple types of diseases. Pressure-enhanced sensing of tissue oxygenation (PRESTO) via fluorescence is a technique extensively analyzed here, that uses an FDA-approved human precursor molecule, 5-aminolevulinic acid (ALA), to stimulate a unique delayed fluorescence signal that is representative of tissue hypoxia. The ALA precontrast agent is metabolized in most tissues into a red fluorescent molecule, protoporphyrin IX (PpIX), which has both prompt fluorescence, indicative of the concentration, and a delayed fluorescence, that is amplified in low tissue oxygen situations. Applied pressure from palpation induces transient capillary stasis and a resulting transient PRESTO contrast, dominant when there is near hypoxia. This study examined the kinetics and behavior of this effect in both normal and tumor tissues, with a prolonged high PRESTO contrast (contrast to background of 7.3) across 5 tumor models, due to sluggish capillaries and inhibited vasodynamics. This tissue function imaging approach is a fundamentally unique tool for real-time palpation-induced tissue response in vivo, relevant for chronic hypoxia, such as vascular diseases or oncologic surgery.

A novel iridium(III) complex-based ratiometric luminescence probe for monitoring hydrogen sulfide in living cells and zebrafish

Hydrogen sulfide exhibits crucial functions in many biological and physiological processes. The abnormal levels of H2S have been revealed to be associated with numerous human diseases. The majority of existing fluorescent probes toward H2S may still need to be improved in terms of single output signal, water solubility, biotoxicity and photostability. The construction of a ratiometric fluorescent probe based on metal complex is one effective strategy for avoiding the mentioned problems for precisely detecting H2S. Herein, we report an iridium(III) complex-based ratiometric luminescence probe (Ir-PNBD), which is designed by coupling the 7-nitro-2,1,3-benzoxadiazoles (NBD) to one of the bipyridine ligands of Ir (III) complex luminophore through a piperazition moiety. Ir-PNBD owns high selectivity and sensitivity toward H2S, and an excellent ability to target mitochondria. Moreover, Ir-PNBD was further successfully utilized to visualize exogenous and endogenous H2S in HeLa cells and zebrafish. Our work offers new opportunities to gain deeper insights into the construction of transition metal complex-based ratiometric luminescent probes and expands their applications in biomedical imaging and disease diagnosis.

Bacterial detection based on Förster resonance energy transfer

The huge economic loss and threat to human health caused by bacterial infection have attracted the public's concern, and there is an urgent need to relieve and improve the tough problem. Therefore, it is significant to establish a facile, rapid, and sensitive method for bacterial detection considering the shortcomings of existing methods. Förster resonance energy transfer (FRET)-based sensors have exhibited immense potential and applicability for bacterial detection given their high signal-to-noise ratio and high sensitivity. This review focuses on the development of FRET-based fluorescence assays for bacterial detection. We summarize the principle of FRET-based assays, discuss the commonly used recognition molecules and further introduce three frequent construction strategies. Based on the strategies and materials, relevant applications are presented. Moreover, some restrictions of FRET fluorescence sensors and development prospects are discussed. Suitable donor-acceptor pairs and stable recognition molecules are the essential conditions for sensors to play their roles, and there is still some room for development. Besides, applying FRET fluorescence sensors to point-of-care detection is still difficult. Future developments could focus on near-infrared fluorescent dyes and simultaneous detection of multiple analytes.

Surface Bio-engineered Polymeric Nanoparticles

Surface bio-engineering of polymeric nanoparticles (PNPs) has emerged as a cornerstone in contemporary biomedical research, presenting a transformative avenue that can revolutionize diagnostics, therapies, and drug delivery systems. The approach involves integrating bioactive elements on the surfaces of PNPs, aiming to provide them with functionalities to enable precise, targeted, and favorable interactions with biological components within cellular environments. However, the full potential of surface bio-engineered PNPs in biomedicine is hampered by obstacles, including precise control over surface modifications, stability in biological environments, and lasting targeted interactions with cells or tissues. Concerns like scalability, reproducibility, and long-term safety also impede translation to clinical practice. In this review, these challenges in the context of recent breakthroughs in developing surface-biofunctionalized PNPs for various applications, from biosensing and bioimaging to targeted delivery of therapeutics are discussed. Particular attention is given to bonding mechanisms that underlie the attachment of bioactive moieties to PNP surfaces. The stability and efficacy of surface-bioengineered PNPs are critically reviewed in disease detection, diagnostics, and treatment, both in vitro and in vivo settings. Insights into existing challenges and limitations impeding progress are provided, and a forward-looking discussion on the field's future is presented. The paper concludes with recommendations to accelerate the clinical translation of surface bio-engineered PNPs.

γ-Glutamyltranspeptidase (GGT) Sensitive Fluorescence Probes for Cancer Diagnosis; Brief Review

Millions of deaths occur each year due to the late diagnosis of abnormal cellular growth within the body. However, the devastating impact of this can be significantly reduced if cancer metastasis is detected early through the use of enzymatic biomarkers. Among several biomarkers, γ-glutamyltranspeptidase (GGT) stands out as a member of the aminopeptidase family. It is primarily found on the surface of cancer cells such as glioma, ovarian, lung, and prostate cancer, without being overexpressed in normal cells or tissues. Recent years have witnessed significant progress in the field of cancer monitoring and imaging. Fluorescence sensing techniques have been employed, utilizing organic small molecular probes with enzyme-specific recognition sites. These probes emit a fluorescent signal upon interacting with GGT, enabling the imaging, identification, and differentiation of normal and cancerous cells, tissues, and organs. This review article presents a concise overview of recent progress in fluorescent probes developed for the selective detection of GGT, focusing on their applications in cancer imaging. It highlights the observed alterations in the fluorescence and absorption spectra of the probes before and after interaction with GGT. Additionally, the study investigates the changes in the probe molecule's structure following enzyme treatment, evaluates the sensor's detection limit, and consolidated imaging studies conducted using confocal fluorescence analysis. This comprehensive survey is expected to contribute to the advancement of sensing techniques for biomarker detection and cancer imaging, providing valuable insights for refining methodologies and inspiring future developments in this field.

A FRET-based multifunctional fluorescence probe for the simultaneous detection of sulfite and viscosity in living cells

Viscosity and sulfur dioxide derivatives were significant indicators for the assessment of health threat and even cancers, therefore, on-site and real time detection of viscosity and sulfur dioxide derivatives has obtained considerable attentions. An FRET-based fluorescence probe JZX was designed and synthesized based on a novel energy donor of N,N-diethyl-4-(1H-phenanthro[9,10-d]imidazol-2-yl)benzamide fluorophore. JZX exhibited a large Stokes shift (230 nm), high energy transfer efficiency, wide emission channel gap (135 nm) and excellent stability and biocompatibility. JZX detected sulfur dioxide with low detection limit (55 nM), fast responding (16 min), high selectivity and sensitivity. Additionally, JZX tend to target endoplasmic reticulum of which normal metabolism will be disturbed by the abnormal levels of viscosity and sulfur dioxide derivatives. Prominently, JZX could concurrently detect viscosity and sulfur dioxide derivatives depending on different fluorescence signals in living cells for the screening of cancer cells. Hence, probe JZX will be a promising candidate for the detection of viscosity and sulfur dioxide derivatives, and even for the diagnosis of liver cancers.

Exciplex Formation by Complexation of an Electron-Accepting Guest in an Electron-Donating Pillar[5]arene Host Liquid

We present a novel system, a liquid-state pillar[5]arene decorated with tri(ethylene oxide) chains, that brings electron-donor and electron-acceptor molecules into proximity for efficient exciplex formation. The electron-accepting guests exhibit a blue-purple emission from a localized excited state upon excitation in common solvents. However, directly dissolving the guests in the electron-donating pillar[5]arene liquid (a bulk system) results in visible green emission from the formed exciplexes. In the bulk system, the guest molecules are always surrounded by excess pillar[5]arene molecules, resulting in the formation of mainly inclusion-type exciplexes. In the bulk system, energy migration occurs between the pillar[5]arene molecules. Excitation of the pillar[5]arenes results in a more intense green exciplex emission than that observed upon direct excitation of the guests. In summary, the pillar[5]arene liquid is a novel system for achieving efficient exciplex formation and energy migration that is different from typical solvent and solid systems.

Recent advances in FRET probes for mitochondrial imaging and sensing

Mitochondria, as essential organelles in cells, play a crucial role in cellular growth and apoptosis. Monitoring mitochondria is of great importance, as mitochondrial dysfunction is often considered a hallmark event of cell apoptosis. Traditional fluorescence probes used for mitochondrial imaging and sensing are mostly intensity-based and are susceptible to factors such as concentration, the probe environment, and fluorescence intensity. Probes based on fluorescence resonance energy transfer (FRET) can effectively overcome external interference and achieve high-contrast imaging of mitochondria as well as quantitative monitoring of mitochondrial microenvironments. This review focuses on recent advances in the application of FRET-based probes for mitochondrial structure imaging and microenvironment sensing.

An FRET-based and ER-targeting fluorescent probe for tracking superoxide anion (O2•-) in the hippocampus of the depressive mouse

Exploration of the pathway for the excessive generation of O2•- in hippocampus during depression is critical for the study on molecular mechanism of depression, and is currently still inconclusive. Herein, we put forward a hypothesis that depression increases the generation of O2•- in hippocampus by triggering ER stress, and verified this hypothesis by constructing an FRET-based ER-targeting fluorescent probe (ER-CRh) which can provide ratiometric detection of O2•- with high sensitivity and selectivity. The probe ER-CRh showed desirable ER-targeting capability, and could detect the endogenous O2•- in the ER of the hippocampal neuronal cells experiencing ER stress. Fluorescence imaging indicates that ER-CRh possesses the capability to penetrate the blood-brain barrier in mouse, and depression could promote the production of endogenous O2•- in hippocampus. Western blotting analysis reveals that the proteins GRP78 and CHOP from the hippocampus of depressive mouse show an up-regulated expression, and it suggests depression causes ER stress in hippocampal neurons. These findings prove our hypothesis, and could conduce to develop safe and effective antidepressants by the protection and repair of hippocampal neurons.

Ratiometric fluorescence-based and chromogenic sensors for the detection of fluoride ions and their application in real samples

This review focuses on the results of synthetic ratiometric fluorescent and colorimetric probes, which have been applied to qualitatively and quantitatively detect fluoride anions in cells, living organisms, and real samples. Primary attention is given to progress made in the working mechanism and applications of these probes to detect fluoride ions in living systems. In addition, design strategies and detection limit for these probes are discussed. This review aims to deliver a comprehensive compilation of the examples reported from 2005 to 2021 on the developments of ratiometric chromogenic and fluorogenic chemosensors for fluoride anions. A total of 20 different ratiometric/colorimetric sensors have been selected for the novelty in their design, sensitivity, detection limit, dynamic range, and speed of detection based on the three fundamental principles of F- ion detection, namely Si-O bond cleavage; excimer emission; and intramolecular charge transfer emission through the B-F monomer, B-F-B bridged dimers, and deprotonation of the amide N-H. Special emphasis has been given to categorize the fluorophores that work in aqueous media, and possible strategies that might be adopted to design green sensors are discussed. Finally, a tabular summary of the comparative studies of all the sensors based on their sensitivity, detection limit, working solvent, and applications is provided. This extensive review may expedite improvements in the development of advanced fluorescent probes for vast and stimulating applications in the future.

Ratiometric Fluorescent Detection of Chromium(III) Based on One-Dimensional Imine-Linked Covalent Organic Framework

Chromium (Cr3+) as a highly toxic pollutant has aroused much attention due to its wide industrial applications. Covalent organic frameworks (COFs) have been considered as one of the most promising metal ion sensors due to their open pore channels and abundant adsorption sites. Herein, a novel luminescent one-dimensional COF (Py-An COF) was constructed by the condensation of 5'-(anthracen-9-yl)-[1,1':3',1″-terphenyl]-4,4″-dicarbaldehyde (An-2CHO) and 1,3,6,8-tetrakis(p-aminophenyl) pyrene (PyTTA). The resulting COF showed high crystallinity, comparative high surface area, and good thermal stability, which can be utilized for Cr3+ fluorescent sensors with high sensitivity and selectivity. Furthermore, the coordination between Schiff-base N atoms and Cr3+ inhibits the photoinduced electron transfer (PET) process, resulting in the enhanced fluorescence intensity of chromophores (436 nm) and decreased the fluorescence intensity of Py-An COF (512 nm) simultaneously, which eventually realizes a highly efficient ratiometric fluorescent sensor for trace Cr3+. Compared with other porous fluorescent materials, Py-An COF possesses a lower detection limit, higher sensitivity, and better selectivity. This work provides strategic guidance for the design of COFs as ratiometric fluorescence sensors.

Ratiometric fluorescent sensing of melatonin based on inner filter effect and smartphone established detection

Melatonin (MLT) is a crucial neurohormone having inhibitory effects over various types of cancer. In this work, 3,6-Diaminocarbazole (DAC), a fluorescent probe is utilized to detect MLT in a highly sensitive, selective and facile way. The unique feature of present work is that MLT is sensed by ratiometric fluorescent technique based on the inner filter effect (IFE) using DAC at an emission wavelength of 310 nm. As a result, a noticeable change in color from red to cyan is observed and the quantitative analysis of fluorescence signals at these wavelengths are used to detect MLT observing a linear relationship between the ratio of emission intensities and the concentration of MLT over a linear range of 0 to 78 μM. DAC can accurately measure the detailed quantity of MLT with a limit of detection of 30 nM and has proved to be an efficient sensing probe due to its excellent molar absorptivity and high photoluminescence quantum yield (PLQY). Sensing characterization was carried out UV-Vis, steady-state, and time- resolved fluorescence spectroscopic techniques. The smartphone app "RGB colour detector" value has been successfully linked with the considerable detectable color changes of DAC on addition of MLT. HOMO-LUMO have been calculated using DFT with B3LYP/6-31G(d,p) level and band gaps of 3.77 eV and 4.91 eV were found for DAC and MLT, respectively. Electrons are not allowed energetically to transfer from MLT to DAC, as is evident from their band gaps. Therefore, IFE can be considered the foremost method in fluorescence quenching of present investigation. The developed sensor was verified by spiking of MLT in human serum.

Selective FRET nano probe based on carbon dots and naphthalimide-isatin for the ratiometric detection of peroxynitrite in drug-induced liver injury

Drug-induced liver injury (DILI) is the most common cause for acute liver failure in the USA and Europe. However, most of DILI cases can recover or be prevented if treatment by the offending drug is discontinued. Recent research indicates that peroxynitrite (ONOO-) can be a potential indicator to diagnose DILI at an early stage. Therefore, the establishment of an assay to detect and track ONOO- in DILI cases is urgently needed. Here, a FRET-based ratiometric nano fluorescent probe CD-N-I was developed to detect ONOO- with high selectivity and excellent sensitivity. This probe consists of carbon dots and a naphthalimide-isatin peroxynitrite sensing system assembled based on electrostatic interactions. Using CD-N-I we were able to detect exogenous ONOO- in live cells and endogenous ONOO- in APAP-induced liver injury of HepG2 cells.

A Review of Dual-Emission Carbon Dots and Their Applications

Carbon dots (CDs), as a rising star among fluorescent nanomaterials with excellent optical properties and fascinating dual-emission characteristics, have attracted increasing attention in sensing, bio-imaging, drug delivery, and so on. The synthesis of dual-emission CDs (DE-CDs) and the establishment of ratiometric fluorescence sensors can effectively diminish background interference and provide more accurate results than single-emission CDs. Although DE-CDs have generated increased attention in many fields, the review articles about DE-CDs are still insufficient. Therefore, we summarized the latest results and prepared this review. This review first provides an overview of the primary synthesis route and commonly used precursors in DE-CDs synthesis. Then, the photoluminescence mechanism behind the dual-emission phenomenon was discussed. Thirdly, the application of DE-CDs in metal cation detection, food safety analysis, biosensing, cell imaging, and optoelectronic devices has been extensively discussed. Finally, the main challenges and prospects for further development are presented. This review presents the latest research progress of DE-CDs synthesis and its application in ratiometric sensing; hopefully, it can help and encourage researchers to overcome existing challenges and broaden the area of DE-CDs research.

A ratiometric fluorescent paper sensor based on dye-embedded MOF for high-sensitive detection of arginine

Ratiometric fluorescent sensors can suppress the interference of factors unrelated to analysis due to their built-in self-calibration characteristics, which exhibit higher sensitivity and more obvious visual detection in the process of qualitative and quantitative analysis. Herein, we constructed a ratiometric fluorescence probe based on fluorescent/colorimetric dual-mode method for the determination of arginine by encapsulating rhodamine B in-situ into UiO-66-NH2 MOFs (UiO-66-NH2@RhB). The as-prepared probe showed dual-emission characteristics under a single excitation wavelength. The fluorescence intensity of UiO-66-NH2 was increased significantly by arginine, while the emission peak intensity of rhodamine B remained stable, resulting in a single-signal response with fixed reference. Furthermore, the practicality of the presented sensor was successfully validated by quantitative detection of arginine in human serum. More significantly, paper-based sensors for arginine detection were devised by using carboxymethyl cellulose modified filter papers. Under the irradiation of ultraviolet light, the paper-based sensors would produce obvious color variation from lightpink to bluish violet. This work provided a convenient and efficient method for on-site detection of arginine.

In-situ quantification of lipids in live cells through imaging approaches

Lipids are important molecules that are widely distributed within the cell, and they play a crucial role in several biological processes such as cell membrane formation, signaling, cell motility and division. Monitoring the spatiotemporal dynamics of cellular lipids in real-time and quantifying their concentrations in situ is crucial since the local concentration of lipids initiates various signaling pathways that regulate cellular processes. In this review, we first introduced the historical background of lipid quantification methods. We then delve into the current state of the art of in situ lipid quantification, including the establishment and utility of fluorescence imaging techniques based on sensors of lipid-binding domains labeled with organic dyes or fluorescent proteins, and Raman and magnetic resonance imaging (MRI) techniques that do not require lipid labeling. Next, we highlighted the biological applications of live-cell lipid quantification techniques in the study of in situ lipid distribution, lipid transformation, and lipid-mediated signaling pathways. Finally, we discussed the technical challenges and prospects for the development of lipid quantification in live cells, with the aim of promoting the development of in situ lipid quantification in live cells, which may have a profound impact on the biological and medical fields.

A novel intramolecular charge transfer-based near-infrared fluorescent probe with large Stokes shift for highly sensitive detection of cysteine in vivo

Cysteine (Cys) distribute widely in organisms as the crucial components of proteins, and play important roles in pathophysiological processes of human body. Low level of Cys might induce hepatic injury, edema and growth retardation, while superfluous level of Cys is found to be closely relevant to Alzheimer's and Parkinson's diseases. In this work, a novel near-infrared (NIR) fluorescent probe PFQ-C was developed for highly selective detection of Cys in living cells and mice by utilizing the cyclization removal reaction between acrylate group and Cys. The superior sensitivity (limit of detection, 0.036 μM), NIR emission (655 nm), large Stokes shift (135 nm) and low cytotoxicity of the probe highlight its broad potential for future clinical applications. The response mechanism of the probe towards Cys was clarified by spectroscopy, chromatography and theoretical calculation. In addition, results of fluorescence imaging of cells and mice revealed the good performance of the probe for monitoring the distributions and variations of Cys activity in vivo, which is very useful for the researches on diseases associated with Cys.

A Two-Step Fluorescence-Resonance Energy Transfer System Constructed by Platinum(II) Metallacycle Based Molecular Recognition

Considerable progress in the construction of efficient fluorescence-resonance energy transfer (FRET) systems has promoted the development of artificial energy transfer materials. However, despite recent advances, the exploration of efficient and easy strategies to fabricate novel supramolecular systems with FRET activities is still a challenge. Here, we report that a two-step FRET system was successfully achieved, driven by platinum metallacycle based host-guest interactions. The two-step FRET system is used for the preparation of a white-light-emitting diode and serves as a nanoreactor for the photosynthetic process. This work offers a strategy for the fabrication of FRET systems and opens opportunities for functional materials constructed by platinum(II) metallacycle based host-guest interactions.

A reversible and ratiometric fluorescent probe based on rhodol derivative with an ESIPT unit for monitoring copper ion content and in situ evaluation of related drugs in cells

The amount of copper ions in the environment has an immediate effect on ecology and food safety, Menkes syndrome and Wilson's disease cause accumulation and deficiency of copper ions in the body, respectively, and neurodegenerative diseases are also closely related to copper ion levels. However, the current copper ion detection technology has a high cost, complex operation, and other disadvantages. In this study, a ratiometric fluorescent probe (RB-DH) was rationally constructed to detect copper ions by coupling benzothiazole to rhodol derivatives. It can be used to determine copper ion concentrations in water samples, agricultural products, cells, and zebrafish. Importantly, due to the reversible response of RB-DH to copper ions, the fluctuation of intracellular copper ion content during the release of copper ion-related drugs (Copper gluconate and D-penicillamine) was successfully monitored with RB-DH for the first time. This study demonstrates RB-DH's potential application in the evaluation of related drug release effects and serves as a guide for the establishment of portable detection techniques for other important substances.

One-step synthesis of a pH switched pyrene-based fluorescent probe for ratiometric detection of HS- in real water samples

Only a few probes are suited for highly acidic environments and sensitive to pH values below 4. Thus, finding a solution for detecting strong acidic (pH value below 2) conditions is still challenging. Herein, we constructed and created a pH-switched fluorescent probe based on pyrene and a heteroatom containing pyridine unit. When exposed to acidic environments (pH 2.0), the probe's fluorescence redshifted with distinct colour and fluorescence changes owing to protonation on the nitrogen atom containing pyridine moiety, which could be deprotonated by HS- selectively compared to other competing analytes. Pyr can detect HS- with a rapid response within 5 s and showed very good quantum yield under acidic environments. The sensing mechanism was confirmed by Density Functional Theory (DFT) studies using the B3LYP and 6-31G+ (d) basis sets. Furthermore, the probe was utilized to monitor HS- in actual water samples and identify H2S gas by a simple paper strip test.

Exciplex Emission and Förster Resonance Energy Transfer in Polycyclic Aromatic Hydrocarbon-Based Bischromophoric Cyclophanes and Homo[2]catenanes

Energy transfer and exciplex emission are not only crucial photophysical processes in many living organisms but also important for the development of smart photonic materials. We report, herein, the rationally designed synthesis and characterization of two highly charged bischromophoric homo[2]catenanes and one cyclophane incorporating a combination of polycyclic aromatic hydrocarbons, i.e., anthracene, pyrene, and perylene, which are intrinsically capable of supporting energy transfer and exciplex formation. The possible coconformations of the homo[2]catenanes, on account of their dynamic behavior, have been probed by Density Functional Theory calculations. The unique photophysical properties of these exotic molecules have been explored by steady-state and time-resolved absorption and fluorescence spectroscopies. The tetracationic pyrene-perylene cyclophane system exhibits emission emanating from a highly efficient Förster resonance energy transfer (FRET) mechanism which occurs in 48 ps, while the octacationic homo[2]catenane displays a weak exciplex photoluminescence following extremely fast (<0.3 ps) exciplex formation. The in-depth fundamental understanding of these photophysical processes involved in the fluorescence of bischromophoric cyclophanes and homo[2]catenanes paves the way for their use in future bioapplications and photonic devices.

A Piperazine Linked Rhodamine-BODIPY FRET-based Fluorescent Sensor for Highly Selective Pd2+ and Biothiol Detection

A class of rhodamine-based fluorescent sensors for the selective and sensitive detection of Pd2+ metal ions in aqueous media has been developed. A rhodamine-based sensor PMS and a rhodamine-BODIPY Förster resonance energy transfer (FRET)-pair sensor PRS have been incorporated with a piperazine linker and an O-N-S-N podand ligand for specific recognition of Pd2+ ion. Both probes displayed colorimetric and fluorescent ratiometric changes when exposed to Pd2+ , due to their spirolactam rings opening and restoring rhodamine conjugation. PRS is highly selective to Pd2+ over 22 other metal ions, showing a 0.6-fold ratiometric difference at I600nm /I515nm . Additionally, the lactam ring in Pd2+ coordinated PRS-Pd could be switched back to the closed form in the presence of various thiols, providing a "red-green traffic light" detection mechanism between red and green emission. Furthermore, PRS showed excellent cell viability and was successfully employed to image Pd2+ and the PRS-Pd complex ensemble could interchangeably detect biothiols including glutathione (GSH) in A549 human lung cancer cells.

The emergence and advancement of Tsuji-Trost reaction triggered carbon monoxide recognition and bioimaging

Considering that carbon monoxide is both a vital gasotransmitter and an obnoxious gas, tremendous efforts have been dedicated toward its recognition through various methods. However, the fluorescent light-up approach through the exploration of optical markers remains one of the most convenient methods owing to its several advantages. Amongst the different approaches towards the development of CO responsive optically active molecular markers, the Tsuji-Trost reaction-based CO recognition strategy has remained one of the most significant areas of interest across researchers working in this field. However, there have been no attempts to exclusively summarize the commendable work done in this area yet. The current review, therefore, attempts to summarize the developments of various optical probes following this reaction strategy until the year 2022. This review provides detailed mechanistic insights into the Tsuji-Trost mediated CO detection strategy. Besides, discussions on the strategic development and employment of probes based on various allyl derivatives - allyl carbamate/carbonate/ethers - will provide a thorough understanding of the detection method. The significant advancements of the Tsuji-Trost reaction as an interesting strategy that is accepted and extensively explored for monitoring CO in various media including air, aqueous solutions and living systems have been elaborately discussed. Various potential applications and utilization of these developed fluorogenic probes for tracing CO in different living systems have been examined systematically. Moreover, monitoring of exogenous/endogenous CO levels, modulation of intracellular CO concentration under various induced conditions and bioimaging of CO in in vivo models have also been detailed here. Briefly, this review summarizes the current prospects of this detection method and the future directions in related fields.

Macropinoscope: Real-Time Simultaneous Tracking of pH and Cathepsin B Activity in Individual Macropinosomes

A fluorescent sensor that allows simultaneous analysis of environmental factors in a limited cellular space is useful for understanding precise molecular interactions in live cells and their biological responses. Macropinocytosis is a ubiquitous endocytic pathway for massive uptake of extracellular fluids, resulting in the formation of macropinosomes. Although macropinocytosis may impact intracellular delivery and cancer proliferation, information on the intracellular behaviors of macropinosomes is limited. Here, we aimed to develop a macropinoscope, a sensor that simultaneously detects pH and cathepsin B activity in individual macropinosomes. A macropinosome-specific marker, dextran (70 kDa), was employed as a platform, onto which fluorescein, Oregon Green, and tetramethylrhodamine were loaded for ratiometric pH sensing and imaging. A cathepsin-B-cleavable peptide sequence bearing sulfo-Cy5 and the quencher BHQ-3 was also mounted; cleavage of the sequence was detected as an increase in sulfo-Cy5 fluorescence. A steep decrease in pH was observed 5-10 min after macropinosome formation, which was accompanied by an immediate increase in cathepsin B activity. Our design concept will lead to the development of other macropinoscopes for the simultaneous detection of other parameters in individual macropinosomes.

Rapid and ratiometric fluorescent detection of hypochlorite by glutathione functionalized molybdenum disulfide quantum dots

We proposed a rapid and ratiometric fluorescent detection method for hypochlorite by glutathione functionalized molybdenum disulfide quantum dots (G-MoS₂ QDs). The G-MoS₂ QDs were obtained through a hydrothermal method and the maximum fluorescence intensity was obtained at 430 nm under excitation of 360 nm. The fluorescence of G-MoS₂ QDs at 430 nm can be weakened by curcumin through the inner filter effect, meanwhile the fluorescence of curcumin at 540 nm appeared. Hypochlorite can fast oxidize curcumin and weaken the inner filter effect, thus the fluorescence of curcumin at 540 nm decreased and the fluorescence of G-MoS₂ QDs at 430 nm increased. This process takes only 30 s at room temperature. This is the rationale behind our rapid ratiometric fluorescent detection model for hypochlorite. Two linear detection ranges for hypochlorite are obtained with concentration from 1 to 20 μM and 20 to 30 μM, the limit of detection (LOD) was 11.5 nM. The standard spike recovery tests on milk and tap water samples showed satisfactory results, which extended the application of G-MoS₂ QDs in the field of ratiometric fluorescence detection assays.

Cascade energy transfer boosted near-infrared circularly polarized luminescence of nanofibers from an exclusively achiral system

We constructed chiral supramolecular nanofibers for light harvesting based on symmetry-breaking, and these can generate near-infrared circularly polarized luminescence (CPL) with high dissymmetry factor (g_lum) through a synergistic energy transfer and chirality transfer process. Firstly, the achiral molecule BTABA was assembled into a symmetry-breaking assembly using a seeded vortex strategy. Subsequently, the chiral assembly can endow the two achiral acceptors, Nile Red (NR) and Cyanine 7 (CY7), with supramolecular chirality, as well as chiroptical properties. CY7 can reach an excited state and emit near-infrared light through a cascade energy transfer process from BTABA to NR and then to CY7, but cannot directly acquire energy from the excited BTABA. Significantly, the near-infrared CPL of CY7 can be obtained with a boosted g_lum value of 0.03. This work will provide a deep insight into the preparation of materials with near-infrared CPL activity from an exclusively achiral system.

Microwave-Assisted Synthesis and Spectral Properties of Pyrrolidine-Fused Chlorin Derivatives

In this work we pursued research involving the microwave-assisted N-alkylation of a NH pyrrolidine-fused chlorin with methyl 4-(bromomethyl) benzoate and subsequent ester hydrolysis as a straightforward strategy to obtain carboxylic acid functionality in the pyrrolidine-fused chlorin, as a single reaction product. We studied the reaction's scope by extending the N-alkylation of the free-base chlorin and its corresponding Zn(II) complex to other alkyl halides, including 1,4-diiodobutane, N-(2-bromoethyl)phthalimide, and 2-bromoethanaminium bromide. In addition, two new chlorin-dansyl dyads were synthesized by reacting dansyl chloride with the 2-aminoethyl pyrrolidine-fused chlorin (dyad 6) and NH pyrrolidine-fused chlorin (dyad 7). According to spectral studies, the linker length between the two fluorophores influences the response of the dyads to the solvent polarity. Because of the simplicity of these approaches, we believe it will enable access to a vast library of custom-tailored N-functionalized chlorins while preserving their important absorption and emission spectra as photosensitizers in photodynamic therapy (PDT) of cancer and photodynamic inactivation (PDI) of microorganisms.

Design and synthesis of photostable triphenylamine based neutral AIE nano luminogens: specific and long-term tracking of mitochondria in cells

With the increasing dependence on fluorescence bioimaging, luminogens with aggregation-induced emission (AIE) properties have gained significant attention due to their excellent photostabilization, minimal photobleaching, high reliability, and superior biocompatibility. Since mitochondria are crucial subcellular organelles in eukaryotic cells with important biological functions, organelle-specific AIE emitters with distinct functions have been highly sought after, but with limited success using simple synthetic methods. Here, we describe a strategy for synthesizing two triphenylamine (TPA) based acrylonitriles, tethered to different donor groups, TPA and phenothiazine (PTZ), respectively, with superior AIE properties using Suzuki coupling. We conducted a systematic and detailed experimental analysis of the structural characteristics of both AIE luminogens, which exhibited excellent photostability, a large Stokes shift, and bright solid-state emission. A cell viability study carried out with F1 and F2 dyes revealed that both luminogens exhibited excellent biocompatibility. Based on fluorescence experiments, F2 displayed excellent AIE characteristics, permeability, biocompatibility, and photostability compared to rhodamine 123, allowing it to selectively stain and track mitochondria in cancer cells over an extended period of time. The Pearson correlation coefficient of F2 and rhodamine 123 was estimated to have an r-value of 0.99. Our findings are expected to provide insight into the synthesis of an extensive archive of AIE-based acrylonitriles with fascinating properties for mitochondrial staining.

Evaluating the Effect of Hydrogen Sulfide in the Idiopathic Pulmonary Fibrosis Model with a Fluorescent Probe

Hydrogen sulfide (H₂S), a gaseous signaling molecule, is involved in a wide range of physiological and pathological processes. H₂S has been proven to play a beneficial role in lung diseases, and the relationship between perturbations in endogenous H₂S synthesis and degree with idiopathic pulmonary fibrosis (IPF) has attacted increasing attention. However, the changes in endogenous lung H₂S levels in the pathological progression of chronic pulmonary diseases remain unclear. To this end, we synthesized a fluorescent probe (Bcy-HS) for the selective imaging of H₂S in living cells and mice. This probe was mainly used for in situ in vivo and cellular imaging as well as a systematic assessment of intrapulmonary H₂S levels at different stages of IPF. In addition, we also discussed the potential of H₂S supplementation in the treatment of pulmonary fibrotic diseases. Our results confirmed the key role of H₂S in pulmonary fibrosis. In cellular and mice models of pulmonary fibrosis, intracellular H₂S levels are reduced. However, the severity of oxidative damage and pulmonary fibrosis decreased after NaSH (H₂S donor). Therefore, we concluded that increasing the H₂S content in vivo may be a novel strategy for IPF treatment.

Fluorescent organometallic dyads and triads: establishing spatial relationships

FRET pairs involving up to three different Bodipy dyes are utilized to provide information on the assembly/disassembly of organometallic complexes. Azolium salts tagged with chemically robust and photostable blue or green or red fluorescent Bodipy, respectively, were synthesized and the azolium salts used to prepare metal complexes [(NHC_blue)ML], [(NHC_green)ML] and [(NHC_red)ML] (ML = Pd(allyl)Cl, IrCl(cod), RhCl(cod), AuCl, Au(NTf₂), CuBr). The blue and the green Bodipy and the green and the red Bodipy, respectively, were designed to allow the formation of efficient FRET pairs with minimal cross-talk. Organometallic dyads formed from two subunits enable the transfer of excitation energy from the donor dye to the acceptor dye. The blue, green and red emission provide three information channels on the formation of complexes, which is demonstrated for alkyne or sulfur bridged digold species and for ion pairing of a red fluorescent cation and a green fluorescent anion. This approach is extended to probe an assembly of three different subunits. In such a triad, each component is tagged with either a blue, a green or a red Bodipy and the energy transfer blue →green → red proves the formation of the triad. The tagging of molecular components with robust fluorophores can be a general strategy in (organometallic) chemistry to establish connectivities for binuclear catalyst resting states and binuclear catalyst decomposition products in homogeneous catalysis.

The Detection and Imaging of pH Values in Living Cells with Hemicyanine Based Colorimetric Mitochondria-Targeted Fluorescent Probe

pH plays a crucial role in cells, especially mitochondria, an important organelle. Developing probes with well-performance for pH detection is still in great demand. Therefore, we first synthesized an indole-based probe (MC-ID-OL) to detect mitochondrial pH changes. The emission wavelength of MC-ID-OL is 649 nm, which does not reach the near-infrared region (650-900 nm). To further enlarge the emission wavelength, probe MC-BI-OL was developed by replacing indolenine with benzoindole. As expected, the emission wavelength changed from 649 to 656 nm. MC-BI-OL probes could also detect pH changes and mitochondria's highly reversible proportional fluorescence localization. In addition, the fluorescence imaging of the MC-BI-OL in HeLa cells demonstrated that this probe could sense changes in the pH of mitochondria in cells.

Silver ion-regulated ratiometric fluorescence assay for alkaline phosphatase detection based on carbon dots and o-phenylenediamine

In this work, a novel silver ion (Ag⁺)-regulated ratiometric fluorescence method for the effective and sensitive determination of alkaline phosphatase (ALP) was established based on carbon dots (CDs) and o-phenylenediamine (OPD). OPD can be oxidized by Ag⁺ to generate fluorescent 2, 3-diaminophenazine (DAP). Thus, based on inner-filter effect (IFE) or/and fluorescence resonance energy transfer (FRET) between CDs and DAP, the CDs-Ag⁺-OPD system can generate dual-emission at 454 nm and 570 nm respectively when excited at 360 nm. The introduction of ascorbic acid (AA) can react with Ag⁺ to produce dehydroascorbic acid (DHAA), which inhibits the generation of DAP, resulting in the fluorescence decrease at 570 nm and fluorescence recovery of CDs at 454 nm. Meanwhile, DHAA can react with OPD to generate quoxaline (QX), which emits strong blue fluorescence at 440 nm, further inhibiting the IFE or/and FRET between CDs and DAP. An obvious ratiometric fluorescence response was observed with the increase of the concentration of AA introduced. Due to the fact that AA can be generated by the enzyme catalysis reaction between ALP and 2-phospho-l-ascorbic acid (AAP), the CDs-Ag⁺-OPD ratiometric system was applied to the determination of ALP successfully. The ratiometric fluorescence value of F₄₅₄/F₅₇₀ increases with increasing ALP concentration, with a linear range of 0.2 to 40 U/L and detection limit of 0.1 U/L. In addition, the CDs-Ag⁺-OPD ratiometric system was successfully applied to the detection of ALP in human serum samples.

Lithium sensors based on photophysical changes of 1-aza-12-crown-4 naphthalene derivatives synthesized via Buchwald-Hartwig amination

Lithium detection is of great significance in many applications. Lithium-sensing compounds with high selectivity are scarce and, if any, complicated to synthesize. We herein report a novel yet simple compound that can detect lithium ions in an organic solvent through changes in absorbance and fluorescence. Naphthalene functionalized with 1-aza-12-crown-4 (1) was synthesized via one step from commercially available 1-bromonaphthalene through Buchwald-Hartwig amination. In order to obtain a structure-property relationship, we also synthesized two other compounds that are structurally similar to 1, wherein the compounds 2 and 3 include an imide moiety (an electron acceptor) and do not include a 1-aza-12-crown-4 unit, respectively. Upon the addition of lithium ions, compound 1 displayed a clear isosbestic point in the absorption spectra and a new peak in the fluorescence spectra, whereas the compounds 2 and 3 indicated miniscule and no spectroscopic changes, respectively. 1H NMR titration studies and the calculated optimized geometry from density functional theory (DFT) indicated the lithium binding on the aza-crown. The calculated limit of detection (LOD) was 21 μM. The lithium detection with 1 is selective among other alkali metals (Na+, K+, and Cs+). DFT calculation indicated that the lone pair electrons in the nitrogen atom of 1 is delocalized yet available to bind lithium, whereas the nitrogen lone pair electrons of 2 showed significant intramolecular charge transfer to the imide acceptor, resulting in a high dipole moment, and thus were unavailable to bind lithium. This work elucidates the key design parameters for future lithium sensors.

Developments in FRET- and BRET-Based Biosensors

Resonance energy transfer technologies have achieved great success in the field of analysis. Particularly, fluorescence resonance energy transfer (FRET) and bioluminescence resonance energy transfer (BRET) provide strategies to design tools for sensing molecules and monitoring biological processes, which promote the development of biosensors. Here, we provide an overview of recent progress on FRET- and BRET-based biosensors and their roles in biomedicine, environmental applications, and synthetic biology. This review highlights FRET- and BRET-based biosensors and gives examples of their applications with their design strategies. The limitations of their applications and the future directions of their development are also discussed.

A combination of a graphene quantum dots-cationic red dye donor-acceptor pair and cucurbit[7]uril as a supramolecular sensor for ultrasensitive detection of cancer biomarkers spermine and spermidine

In a unique approach, the combination of a donor-acceptor pair of hydroxy graphene quantum dots (GQDs-OH) and a red-emissive donor-two-acceptor (D-2-A) type dye with pyridinium units (BPBP) and the well-known host cucurbit[7]uril (CB[7]) has been exploited as a supramolecular sensing assembly for the detection of cancer biomarkers spermine and spermidine in aqueous media at the sub-ppb level based on the affinity-driven exchange of guests from the CB[7] portal. In the binary conjugate, green fluorescent GQDs-OH transfers energy to trigger the emission of the dye BPBP and itself remains in the turn-off state. CB[7] withdraws the dye from the surface of GQDs-OH by strong host-guest interactions with its portal, making GQDs-OH fluoresce again to produce a ratiometric response. In the presence of spermine (SP) or spermidine (SPD), their strong affinity with CB[7] forces the ejection of the fluorophore to settle on the GQDs-OH surface, and the strong green emission of GQDs-OH turns off to device a supramolecular sensor for the detection of SP/SPD. The DFT studies revealed interesting excited-state charge-transfer conjugate formation between BPBP and GQDs leading to turn-on emission of the dye, and further supported the stronger binding modes of BPBP-CB[7], indicating the retrieval of the emission of GQDs. The assembly-disassembly based sensing mechanism was also established by Job's plot analysis, particle size analysis, zeta potential, time-resolved spectroscopy, ITC studies, microscopic studies, etc. The supramolecular sensing assembly is highly selective to SP and SPD, and showed nominal interference from other biogenic amines, amino acids, various metal ions, and anions. The limits of detection (LODs) were 0.1 ppb and 0.9 ppb for spermine and spermidine, respectively. The potential for the real-world application of this sensing assembly was demonstrated by spiking SP and SPD in human urine and blood serum with a high %recovery.

Dual-reverse-signal ratiometric fluorescence method for malachite green detection based on multi-mechanism synergistic effect

The proposition of ratiometric detection mode has demonstrated great superiority in improving analysis accuracy by forming self-calibration. Herein, the novel dual-reverse-signal ratiometric fluorescence detection for malachite green (MG) was first achieved based on synergistic effect of fluorescence resonance energy transfer (FRET) and inner filter effect (IFE). The ratiometric fluorescence probe (B-RCDs) was self-assembled via electrostatic attraction between blue-emission carbon dots (BCDs) and red-emission carbon dots (RCDs), followed with FRET effect from BCDs to RCDs and exhibited dual-emission at 450 nm and 627 nm. In the presence of MG, the IFE effect between MG and RCDs quenched the fluorescence at 627 nm and restored the fluorescence at 450 nm, sending out two reverse signals along with an obvious color change from pink to purple (302 nm UV lamp). This ratiometric method not only simplified the preparation process, but also improved the detection sensitivity, showing a low limit of detection (LOD) of 41.8 nM, which exhibited superiority than that of single-signal RCDs (157.3 nM). This method held a rapid response of 10 min and represented satisfactory recoveries (99.14%-109.08%) in real water samples, revealing it was a promising candidate in the fast, sensitive and practical detection of MG. Moreover, the design of synergistic effect supplied a new perspective for the development of ratiometric sensing in the future.

A Novel Ratio Probe Based on Mixing of Thiocyanuric Acid- Enhanced Silver Nanoclusters with N, S Co-Doped Carbon Quantum Dots for Detecting Sodium 2,3-Dimercapto Propanesulfonic Acid

Background

The ratio fluorescent probe (RF-probe) has the characteristics of self-calibration and eliminating the influence of experimental factors (such as probe concentration, excitation intensity stability, and solution environment) in quantitative assays based on the linear relationship between the intensity ratio of two emission peaks and the concentration of analyte, especially in a complex biological matrix.

Objective

High-luminescent Ag nanoclusters (AgNCs) were prepared at room temperature due to aggregation-induced emission (AIE) through the incorporation of trithiocyanuric acid (TA). Subsequently, a new RF-probe based on mixing of AgNCs-TA with nitrogen and sulfur co-doped carbon quantum dots (N, S-CQDs) was prepared for sensitively and selectively assaying sodium 2, 3-dimercaptopropane-1-sulfonate (DMPS).

Methods

The fluorescence of N, S-CQDs was quenched in the presence of the AgNCs-TA mainly deriving from the inner filter effect (IFE), and its fluorescence intensities at 440 and 650 nm could recover and drop upon the addition of DMPS (λex = 370 nm).

Results

The RF-probe enables DMPS to be detected by fluorometry with a linear response in the 0.67–30.0 μmol/L concentration range and a 54.7 nmol/L detection limit (at 3σ/slope). At the same time, we also used the labeled recovery method to confirm the reliability of the method. The recoveries were 97.93–106.33%, and the corresponding standard deviations (RSD) were less than 1.87%.

Conclusion

The N, S-CQDs/AgNCs-TA RF-probe can also semi-quantitatively monitor DMPS by naked eyes.

Highlights

The mechanism of fluorescence enhancement of the AgNCs by TA also were investigated by the N, S-CQDs/AgNCs-TA-DMPS system. What’s more, the RF-probe of N, S-CQDs/AgNCs-TA was successfully utilized to monitor DMPS in real samples.