Optical temperature-sensing properties of trivalent europium with high sensitivities in a wide temperature range

To develop new luminescent materials for optical thermometer, the Eu3+-activated BaY2ZnO5 (BYZ) phosphors were designed. Upon 394 nm excitation, several groups of 5D0-2→7FJ (J = 0-4) transitions are observed, and the dominant emission is located at 625 nm. The temperature-dependent emission spectra reveal that the emission peaks are weakened with different rates, depending on the excited states of Eu3+. The transient decay kinetics, studied at various temperatures, are in agreement with the emission spectral features. The optical temperature-sensing performance is evaluated with two strategies. For the thermally-coupled (TC) levels of Eu3+, the fluorescence intensity ratio (FIR) of the 536 and 593 nm emissions follows the Boltzmann distribution, and the sensor sensitivities rise with increasing temperature. For the non-TC levels of 5D0 and 5D2, the piecewise functions between the FIRs and absolute temperature are utilized, and the highest absolute and relative sensitivities in the BYZ:7%Eu3+ phosphor are obtained to be 0.674 and 2.19% K-1 at 533 K, respectively. Thus, the developed samples can show higher sensitivities at higher temperature.

Emission Enhancement and Energy Transfers in YV0.5P0.5O4 Nanoparticles Codoped with Eu3+ and Bi3+ Ions

In this study, solid-state solutions of yttrium orthovanadate-phosphate with varying concentrations of codopants (Eu³⁺, Bi³⁺) have been obtained via coprecipitation. An ionic radii mismatch between V⁵⁺ and P⁵⁺ substituents is manifested in broad XRD lines. The sharpening of the XRD lines is observed with increasing bismuth ions concentration in the Eu³⁺ codoped YV_0.5P_0.5O₄ matrix. The difference in the number of the Stark components for the ⁵D₀ → ⁷F_J transitions indicates changes in the lattice and a number of possible Eu³⁺ sites. A thorough, systematic spectroscopic analysis of YV_0.5P_0.5O₄: x mol % Eu³⁺, y mol % Bi³⁺ was conducted at room temperature and 5 K. Metal-to-metal energy transfers occurring between Eu³⁺, V⁵⁺, and Bi³⁺ optically active ions have been investigated. Additionally, efficiency of the Bi³⁺-Eu³⁺ energy transfer (ET) was calculated.

Rare-Earth Doped Iron Oxide Nanostructures for Cancer Theranostics: Magnetic Hyperthermia and Magnetic Resonance Imaging

Superparamagnetic iron oxide nanoparticles (SPIONs) have been extensively investigated during the last couple of decades because of their potential applications across various disciplines ranging from spintronics to nanotheranostics. However, pure iron oxide nanoparticles cannot meet the requirement for practical applications. Doping is considered as one of the most prominent and simplest techniques to achieve optimized multifunctional properties in nanomaterials. Doped iron oxides, particularly, rare-earth (RE) doped nanostructures have shown much-improved performance for a wide range of biomedical applications, including magnetic hyperthermia and magnetic resonance imaging (MRI), compared to pure iron oxide. Extensive investigations have revealed that bigger-sized RE ions possessing high magnetic moment and strong spin-orbit coupling can serve as promising dopants to significantly regulate the properties of iron oxides for advanced biomedical applications. This review provides a detailed investigation on the role of RE ions as primary dopants for engineering the structural and magnetic properties of Fe₃ O₄ nanoparticles to carefully introspect and correlate their impact on cancer theranostics with a special focus on magnetic hyperthermia and MRI. In addition, prospects for achieving high-performance magnetic hyperthermia and MRI are thoroughly discussed. Finally, suggestions on future work in these two areas are also proposed.

Enrichment of Crystal Field Modification via Incorporation of Alkali K+ Ions in YVO4:Ho3+/Yb3+ Nanophosphor and Its Hybrid with Superparamagnetic Iron Oxide Nanoparticles for Optical, Advanced Anticounterfeiting, Uranyl Detection, and Hyperthermia Applications

In this work, we report a polyol route for easy synthesis of upconversion (UC) phosphor nanoparticles, YVO₄:Ho³⁺-Yb³⁺-K⁺, which enables large-scale production and enhancement of luminescence. Upon 980 nm laser excitation, the UC emission spectrum shows a sharp bright peak at ∼650 nm of Ho³⁺ ion; and the luminescence intensity increases twofold upon K⁺ codoping. Upon 300 nm excitation, the downconversion emission spectrum shows a broad peak in the 400-500 nm range (related to the charge transfer band of V-O) along with Ho³⁺ peaks. In addition, the polyethylene glycol-coated UC nanoparticles are highly water-dispersible and their hybrid with Fe₃O₄ nanoparticles shows magnetic-luminescence properties. A hyperthermia temperature is achieved from this hybrid. Both UC and hybrid nanoparticles show interesting security ink properties upon excitation by a 980 nm laser. The particles are invisible in normal light but visible upon 980 nm excitation and are useful in display devices, advanced anticounterfeiting purposes, and therapy of cancer via hyperthermia and bioimaging (since it shows red emission at ∼650 nm). Using UC nanoparticles, detection of uranyl down to 20 ppm has been achieved.

Brilliant Nonlinear Optical Response of Ho3+ and Yb3+ Activated YVO4 Nanophosphor and Its Conjugation with Fe3O4 for Smart Anticounterfeit and Hyperthermia Applications

YVO4:Ho3+/Yb3+ nanophosphors prepared by an effective polyol-mediated route show dual-mode behavior in photoluminescence. Upon 980 nm excitation, the upconversion red emission spectrum exhibits a bright red peak at ∼650 nm, characteristic of the electronic transition of the Ho3+ ion via involvement of two-photon absorption, which has been confirmed by the power-dependent luminescence study. Moreover, at 300 nm excitation, downconversion emission peaks are observed at 550, 650, and ∼755 nm. The nonradiative resonant energy transfer occurs from the V-O charge transfer band to Ho3+ ions, resulting in an improved emission of Ho3+ ions. Moreover, polyethylene glycol-coated nanoparticles make it suitable for water dispersibility; and these particles are conjugated with Fe3O4 nanoparticles to form magnetic-luminescent hybrid nanoparticles. Highly water-dispersible magnetic-luminescent hybrid material attained the hyperthermia temperature (∼42 °C) under an applied AC magnetic field. The specific absorption rate value is found to be high (138 W/g), which is more than that of pure superparamagnetic Fe3O4 nanoparticles. At 300 nm excitation, the high quantum yield value of ∼27% is obtained from YVO4:Ho3+/Yb3+, which suggests that it is a good phosphor material. By employing the neutron activation analysis technique, it is shown that nanophosphor particles can absorb Au3+ up to the ppm level. Interestingly, such nanophosphor also shows the potentiality for anticounterfeiting applications.

Magnetic chitosan nanocomposites for simultaneous hyperthermia and drug delivery applications: A review

Cancer is one of the major causes of death worldwide, and its prevalence is rising every day. New methods and materials with multifunctional tasks such as simultaneous hyperthermia treatment and drug release with minimum side effects are highly demanded. Magnetic chitosan nanocomposites can be utilized for localized tumor heating under magnetic field and have a controlled anticancer drug release due to unique functional groups of chitosan with the least complications. Combining different types of magnetic cores and engineered chitosan shells can create unique characteristics such as biocompatibility, the least toxic effects, long-term circulation in the body, controlled drug released, and the ability to carry various medicines. Recent advances in the synthesis, development, and applications of magnetic chitosan nanocomposites for hyperthermia and drug delivery are summarized in this review. The structure and different heating and drug release mechanisms of this magnetic system are discussed.

Preparation of magnetized iron oxide grafted on graphene oxide for hyperthermia application

Magnetic hyperthermia therapy (MHT) is a highly promising therapeutic modality for the treatment of different kinds of cancers and malignant tumors. The therapy is based on the concept that; iron oxide nanoparticles deposited at cancer sites can generate heat when exposed to an alternating current magnetic field or near infrared radiation and consequently destroying only the cancer cells by exploiting their vulnerability to heat. The fact that the treatment is at molecular level and that iron oxide nanoparticles provide more guided focus heating justifies its efficacy over treatment such as surgery, radiation therapy and chemotherapy. Nevertheless, the spread of MHT as the next-generation therapeutics has been shadowed by insufficient heating especially at the in vivo stage. This can be averted by modifying the iron oxide nanoparticle structure. To this end, various attempts have been made by developing a magnetic hybrid nanostructure capable of generating efficient heat. However, the synthesis method for each component (of the magnetic hybrid nanostructure) and the grafting process is now an issue. This has a direct effect on the performance of the magnetic hybrid nanostructure in MHT and other applications. The main objective of this review is to detail out the different materials, methods and characterization techniques that have been used so far in developing magnetic hybrid nanostructure. In view of this, we conducted a comprehensive review and present a road map for developing a magnetic hybrid nanostructure that is capable of generating optimum heat during MHT. We further summarize the various characterization techniques and necessary parameters to study in validating the efficiency of the magnetic hybrid nanostructure. Hopefully, this contribution will serve as a guide to researchers that are willing to evaluate the properties of their magnetic hybrid nanostructure.

Synthesis of Fe3O4@Gd2O3:Tb3+@SiOx multifunctional nanoparticles and their luminescent, magnetic and hyperthermia properties

Multifunctional Fe₃O₄@Gd₂O₃:Tb³⁺@SiOx nanoparticles were successfully synthesized by co-precipitation and polyol methods. The synthesized nanoparticles were composed by cubic phase as core of Fe₃O₄ and Gd₂O₃:Tb³⁺ and the shell of amorphous SiOx. The composites exhibited a spherical shape with a diameter of 10-15 nm and highly uniform dispersion. They showed not only excellent fluorescence under excitation at a wavelength of 278 nm, but also strong magnetic responsiveness (M_S = 24.040 emu g^-1). The results of magnetic resonance imaging in vitro (r₁ = 6.00 mm^-1 s^-1, r₂ = 63.95 mm^-1 s^-1) showed that the samples could be used as T₁-positive and T₂-negative contrast agents. In addition, it was found that Fe₃O₄@Gd₂O₃:Tb³⁺@SiOx attains hyperthermia temperature (43 °C) in 90 s under the alternating current magnetic field, and their specific absorption rate (229.9 w g^-1) was higher than that of Fe₃O₄ (183.92 w g^-1). Hence, the multifunctional nanoparticle could be used for the diagnosis and therapy of cancer.

TbIII/3d–TbIII clusters derived from a 1,4,7-triazacyclononane-based hexadentate ligand with field-induced slow magnetic relaxation and oxygen-sensitive luminescence

A family of new Tb^III/3d–Tb^III cluster complexes based on N,N′,N′′-tris(3,5-dimethyl-2-hydroxybenzyl)-1,4,7-triazacyclononane have been synthesized and they exhibit interesting magnetic and luminescent properties.

Silica-modified luminescent LaPO4 :Eu@LaPO4 @SiO2 core/shell nanorods: Synthesis, structural and luminescent properties

Monoclinic-type tetragonal LaPO₄ :Eu (core) and LaPO₄ :Eu@LaPO₄ (core/shell) nanorods (NRs) were successfully prepared using a urea-based co-precipitation process under ambient conditions. An amorphous silica layer was coated around the luminescent core/shell NRs via the sol-gel process to improve their solubility and colloidal stability in aqueous and non-aqueous media. The prepared nano-products were systematically characterized by X-ray diffraction pattern, transmission electron microscopy, energy dispersive X-ray analysis, and FTIR, UV/Vis, and photoluminescence spectroscopy to examine their phase purity, crystal phase, surface chemistry, solubility and luminescence characteristics. The length and diameter of the nano-products were in the range 80-120 nm and 10-15 nm, respectively. High solubility of the silica-modified core/shell/Si NRs was found for the aqueous medium. The luminescent core NRs exhibited characteristic excitation and emission transitions in the visible region that were greatly affected by surface growth of insulating LaPO₄ and silica layers due to the multiphonon relaxation rate. Our luminescence spectral results clearly show a distinct difference in intensities for core, core/shell, and core/shell/Si NRs. Highly luminescent NRs with good solubility could be useful candidates for a variety of photonic-based biomedical applications.

Covalent bridging of surface functionalized Fe3O4 and YPO4:Eu nanostructures for simultaneous imaging and therapy

Magnetic luminescent hybrid nanostructures (MLHN) have received a great deal of attention due to their potential biomedical applications such as thermal therapy, magnetic resonance imaging, drug delivery and intracellular imaging. We report the development of bifunctional Fe3O4 decorated YPO4:Eu hybrid nanostructures by covalent bridging of carboxyl PEGylated Fe3O4 and amine functionalized YPO4:Eu particles. The surface functionalization of individual nanoparticulates as well as their successful conjugation was evident from Fourier transform infrared (FTIR) spectroscopy, dynamic light scattering (DLS), zeta-potential and transmission electron microscopy (TEM) studies. X-ray diffraction (XRD) analysis reveals the formation of highly crystalline hybrid nanostructures. TEM micrographs clearly show the binding/anchoring of 10 nm Fe3O4 nanoparticles onto the surface of 100-150 nm rice grain shaped YPO4:Eu nanostructures. These MLHN show good colloidal stability, magnetic field responsivity and self-heating capacity under an external AC magnetic field. The induction heating studies confirmed localized heating of MLHN under an AC magnetic field with a high specific absorption rate. Photoluminescence spectroscopy and fluorescence microscopy results show optical imaging capability of MLHN. Furthermore, successful internalization of these MLHN in the cells and their cellular imaging ability are confirmed from confocal microscopy imaging. Specifically, the hybrid nanostructure provides an excellent platform to integrate luminescent and magnetic materials into one single entity that can be used as a potential tool for hyperthermia treatment of cancer and cellular imaging.

Folic acid conjugated Fe3O4 magnetic nanoparticles for targeted delivery of doxorubicin

The development of water-dispersible Fe₃O₄ magnetic nanoparticles having a carboxylic moiety for drug binding and an amine moiety for folate mediated drug targeting.

Multi-modal MR imaging and magnetic hyperthermia study of Gd doped Fe3O4 nanoparticles for integrative cancer therapy

Gadolinium (Gd) doped iron oxide nano-mediator in cancer theranostics are one of the most promising candidates in combining diagnostics (imaging) and therapeutics (molecular therapy) functions in a single, multimodal platform.

Fabrication of MPEG-b-PMAA capped YVO4:Eu nanoparticles with biocompatibility for cell imaging

A novel nanoparticle with multilayer core-shell architecture for cell imaging is designed and synthesized by coating a fluorescent YVO4:Eu core with a diblock copolymer, MPEG-b-PMAA. The synthesis of YVO4:Eu core, which further makes MPEG-b-PMAA-YVO4:Eu NPs adapt for cell imaging, is guided by the model determined upon the evaluation of pH and CEu%. The PMAA block attached tightly on the YVO4:Eu core forms the inner shell and the MPEG block forms the biocompatible outermost shell. Factors including reaction time, reaction temperature, CEu% and pH are optimized for the preparation of the YVO4:Eu NPs. A precise defined model is established according to analyzing the coefficients of pH and CEu% during the synthesis. The MPEG-b-PMAA-YVO4:Eu NPs, with an average diameter of 24 nm, have a tetragonal structure and demonstrate luminescence in the red region, which lies in a biological window (optical imaging). Significant enhancement in luminescence intensity by MPEG-b-PMAA-YVO4:Eu NPs formation is observed. The capping copolymer MPEG-b-PMAA improves the dispersibility of hydrophobic YVO4:Eu NPs in water, making the NPs stable under different conditions. In addition, the biocompatibility MPEG layer reduces the cytotoxicity of the nanoparticles effectively. 95% cell viability can be achieved at the NPs concentration of 800 mgL(-1) after 24h of culture. Cellular uptake of the MPEG-b-PMAA-YVO4:Eu NPs is evaluated by cell imaging assay, indicating that the NPs can be taken up rapidly and largely by cancerous or non-cancerous cells through an endocytosis mechanism.

Radiolanthanide-loaded agglomerated Fe3O4 nanoparticles for possible use in the treatment of arthritis: formulation, characterization and evaluation in rats

This investigation reports the preparation of agglomerated Fe₃O₄ nanoparticles and evaluation of its utility as a viable carrier in the preparation of radiolanthanides as potential therapeutic agents for the treatment of arthritis. The material was synthesized by a chemical route and characterized by XRD, FT-IR, SEM, EDX and TEM analysis. The surface of agglomerated particle possessed ion pairs (-O^-:Na⁺) after dispersing particles in a NaHCO₃ solution at pH = 7 which is conducive for radiolanthanide (*Ln = ⁹⁰Y, ¹⁵³Sm, ¹⁶⁶Ho, ¹⁶⁹Er, ¹⁷⁷Lu) loading by replacement of Na⁺ ions with tripositive radiolanthanide ions. Radiolanthanide-loaded particulates exhibited excellent in vitro stability up to ∼3 half-lives of the respective lanthanide radionuclides when stored in normal saline at 37 °C. The radiochemical purities of the loaded particulates were found to be retained to the extent of >70% after 48 h of storage when challenged by a strong chelator DTPA present at a concentration as high as 5 mM, indicating fairly strong chemical association of lanthanides with agglomerated Fe₃O₄ nanoparticles. Biodistribution studies of ⁹⁰Y and ¹⁶⁶Ho-loaded particulates carried out after intra-articular injection into one of the knee joints of a normal Wistar rat revealed near-complete retention of the radioactive preparations (>98% of the administered radioactivity) within the joint cavity even after 72 h post injection. This was further confirmed by sequential whole-body radio-luminescence imaging. These experimental results are indicative of the potential use of radiolanthanide-loaded agglomerated Fe₃O₄ nanoparticles for the treatment of arthritis.

Synthesis, growth and photoluminescence behaviour of Gd2O2SO4:Eu3+ nanophosphors: the effect of temperature on the structural, morphological and optical properties

Gd₂(SO₄)₃·8H₂O, Gd₂O₂SO₄, and Gd₂O₂SO₄:Eu³⁺ nanoparticles have been synthesized by CTD method.

Flexible Janus nanofibers: a feasible route to realize simultaneously tuned magnetism and enhanced color-tunable luminescence bifunctionality

Novel Janus nanofibers with magnetic and color-tunable bifunctionality have been fabricated by electrospinning technology using a specially designed parallel spinneret.

Magnetic, long persistent luminescent and mesoporous nanoparticles as trackable transport drug carriers

In this paper, Gd₂O₃@mSiO₂@CaTiO₃:Pr nanoparticles with a novel core/shell structure featured by mesoporous, magnetic and long persistent luminescent properties have been synthesized via a facile template method. The as-prepared nanoparticles show ordered mesoporous characteristics, monodisperse spherical morphology and narrow size distribution, so they are expected to be suitable as a drug carrier. These nanoparticles exhibit bright red phosphorescence at 614 nm after UV irradiation and the persistent luminescence can persist for more than one hour. Moreover, they possess a prominent longitudinal relaxivity (r₁) value of 6.43 mM^-1 s^-1, which suggests that these nanoparticles can be used as MR imaging agents. The combination of long persistent luminescent and magnetic properties reveals the high imaging sensitivity, which suggests that these nanoparticles can be used for imaging in vivo with a high signal to noise ratio. Drug release results indicate that the nanoparticles hold excellent drug sustained properties. The cumulative released amount of drugs can also be easily monitored by the change of luminescence intensity. After modification with polyethylene glycol, the resulting nanoparticles demonstrate good biocompatibility and low toxicity. Furthermore, we can realize in vivo imaging for over 20 min using these nanoparticles. These results indicate the promising use of these nanoparticles as multifunctional traceable drug carriers in vivo.

Bacterially synthesized ferrite nanoparticles for magnetic hyperthermia applications

Magnetic hyperthermia uses AC stimulation of magnetic nanoparticles to generate heat for cancer cell destruction. Whilst nanoparticles produced inside magnetotactic bacteria have shown amongst the highest reported heating to date, these particles are magnetically blocked so that strong heating occurs only for mobile particles, unless magnetic field parameters are far outside clinical limits. Here, nanoparticles extracellularly produced by the bacteria Geobacter sulfurreducens are investigated that contain Co or Zn dopants to tune the magnetic anisotropy, saturation magnetization and nanoparticle sizes, enabling heating within clinical field constraints. The heating mechanisms specific to either Co or Zn doping are determined from frequency dependent specific absorption rate (SAR) measurements and innovative AC susceptometry simulations that use a realistic model concerning clusters of polydisperse nanoparticles in suspension. Whilst both particle types undergo magnetization relaxation and show heating effects in water under low AC frequency and field, only Zn doped particles maintain relaxation combined with hysteresis losses even when immobilized. This magnetic heating process could prove important in the biological environment where nanoparticle mobility may not be possible. Obtained SARs are discussed regarding clinical conditions which, together with their enhanced MRI contrast, indicate that biogenic Zn doped particles are promising for combined diagnostics and cancer therapy.

Enhanced luminescence of CaMoO₄:Eu by core@shell formation and its hyperthermia study after hybrid formation with Fe₃O₄: cytotoxicity assessment on human liver cancer cells and mesenchymal stem cells

Highly water dispersible Eu³⁺ doped CaMoO₄ nanoparticles (core) covered by CaMoO₄ (shell) have been prepared using the polyol method. Significant enhancement in luminescence intensity by core@shell formation is observed due to the decrease of non-radiative rate arising from surface/defect of particles. Effect of 266 nm laser excitation (Mo-O charge transfer band) on the asymmetric ratio (A₂₁ = intensity ratio of electric to magnetic dipole transitions) has been studied and compared with a xenon lamp source. Luminescence intensity increases with the increase of power at 532 nm laser excitation. In order to explore materials, which can show dual functionalities such as luminescence as well as magnetic properties (magnetization of ∼14.2 emu g⁻¹), water dispersible Fe₃O₄-CaMoO₄:Eu hybrid magnetic nanoparticles (MN) have been prepared. This shows good heating ability up to ∼42 °C (hyperthermia) and luminescence in the red region (∼612 nm), which is in a biological window (optical imaging). Biocompatibility of the synthesized Fe₃O₄-CaMoO₄:Eu hybrid magnetic nanoparticles has been evaluated in vitro by assessing their cytotoxicity on human liver cancer cells (HepG2 cells) and hTERT cells using the MTT assay and fluorescent microscopy studies.

Enhanced specific absorption rate in silanol functionalized Fe3O4 core-shell nanoparticles: study of Fe leaching in Fe3O4 and hyperthermia in L929 and HeLa cells

Core-shell Fe3O4-SiO2 magnetic nanoparticles (MNPs) have been synthesized using a simple synthesis procedure at different temperatures. These MNPs are used to investigate the effect of surface coating on specific absorption rate (SAR) under alternating magnetic field. The temperature achieved by silica coated Fe3O4 is higher than that by uncoated MNPs (Fe3O4). This can be attributed to extent of increase in Brownian motion for silica coated MNPs. The sample prepared at optimized temperature of 80°C shows the highest SAR value of 111W/g. It is found that SAR value decreases with increase in shell thickness. The chemical stability of these samples is analyzed by leaching experiments at pH 2-7. The silica coated samples are stable up to 7 days even at pH 2. Biocompatibility of the MNPs is evaluated in vitro by assessing their cytotoxicity on L929 and human cervical cancer cells (HeLa cells) using sulforhodamine-B assay. Their hyperthermic killing ability is also evaluated in HeLa cells using the same method. Cells treated with MNPs along with induction heating show decrease in viability as compared to that without induction heating. Further, cell death is found to be ∼55% more in cells treated with silica coated MNPs under induction heating as compared to untreated control. These results establish the efficacy of Fe3O4-SiO2 prepared at 80°C in killing of tumor cells by cellular hyperthermia.

Down-shifting and upconversion photoluminescence in Ho3+/Yb3+ codoped GdNbO4: effect of the Bi3+ ion and the magnetic field

Energy transfer from host to activator ion, down-shifting, upconversion and effect of magnetic field and Bi³⁺ ions on photoluminescence of Ho³⁺ have been investigated.